Yes, calcium oxide (CaO) reacts with carbon monoxide (CO) to form calcium carbonate (CaCO3) and oxygen gas (O2). The reaction can be represented by the following equation:
CaO + CO -> CaCO3 + O2
This reaction is an example of a chemical change, as it results in the formation of a new substance with different chemical properties. The reaction is also exothermic, meaning that it releases heat.
Calcium oxide is a white solid that is used in a variety of applications, including cement production and the purification of flue gases. Carbon monoxide is a colorless, odorless gas that is toxic to humans when inhaled. It is produced as a byproduct of the incomplete combustion of fossil fuels.
Hope This Helps You!
BRAINLIEST HELP PLEASE. 6. In order to produce CO2, a student put a sample of calcium carbonate in a flask and
added hydrochloric acid using the following equation:
CaCO3 + 2HCI- H2O + CO2 + CaCl2
The student finds the mass of CO2 generated in the lab to be 100 g. If the student
began with 200 g of HCl and excess CaCO3, what was the percent yield of CO2?
On adding 200g hydrochloric acid to excess calcium carbonate, the percent yield of carbon dioxide is equal to 82.84%.
200g of HCl was added to an excess amount of calcium carbonate to produce 100g of carbon dioxide along with water and calcium chloride. The reaction is written as:
CaCO₃ + 2HCl → H₂O + CO₂ + CaCl₂
Since calcium carbonate is excess, two moles of hydrochloric acid gives rise to one mole of carbon dioxide.
To calculate the percent yield, we can use stoichiometry,
The molar mass of hydrochloric acid = 36.46 g/mol
The molar mass of carbon dioxide = 44.01 g/mol
To calculate theoretical yield,
200g HCl/1 × 1 mole HCl/36.46g HCl × 1 mol CO₂ /2mol HCl × 44.01 mol CO₂/ 1 mole CO₂
= 120.707 g
To calculate the percent yield,
The amount of CO₂ produced = 100g
Dividing 100 by the theoretical yield
= 100/120.707 = 0.8284
Now multiplying the value by 100
= 0.8284 × 100 = 82.84 %
To learn more about percent yield here
https://brainly.com/question/2506978
#SPJ4
A
Choose the correct symbol to
compare these numbers.
-4 [?] 0.589
A. <
B. >
C. =
Hello there!
Answer:
A. <
Explanation:
You should remember that all negative numbers are smaller then positive numbers. For example, -10 < 7 or -9479 < 1
-4 is a negative integer
0.598 is a positive number
So -4 < 0.598 (negative < positive)
Fill in the blank.
When using a graduated cylinder you must look at ________ of the liquid when taking readings.
When using a graduated cylinder you must look at Meniscus of the liquid when taking readings.
How to Read a Graduated Cylinder?The surface at the center of the meniscus, not the top of the ring of liquid clinging to the graduated cylinder's wall, must be read in order to read a graduated cylinder correctly. This "center" will be the meniscus's lowest point for the majority of liquids. The center of the meniscus will be the highest point of the liquid for a very small number of liquids, such as mercury. Your line of sight must be level with the meniscus's center of curvature in order to interpret it correctly.
Reading a graded cylinder is a matter of paying close attention to the details once the measurement interval has been established and the meniscus has been assessed. Read the numbered line below while keeping your eyes level with the meniscus's middle and looking straight down.
Learn more about graduated cylinder here: https://brainly.com/question/27932486
#SPJ1
A group of students is making paper airplanes. They think that the kind of paper and the design of the airplane may affect how far each paper airplane flies. The students first test if the kind of paper affects how far the airplane flies. They make several airplanes out of different kinds of paper, using the same design. Why is it important that all the airplanes have the same design? (SC. 6. N. 1. 1)
By using the same design, the students can learn about both the effect of the design and the effect of the paper.
By using the same design, the students can learn about the effect of the design.
If they do not use the same design, the students cannot learn about the effect of the paper.
It is NOT important for the airplanes to have the same design because the students are not testing the effect of the design
Students can learn about the impact of both the design and the paper by working with the same layout. Students can learn about causality in design by replicating it and seeing its effects firsthand. The pupils won't get the full benefit of the paper unless they all follow the same format. There is no need for uniformity in airplane design since pupils will not be comparing the performance of different planes.
For the first test, students conduct an experiment to evaluate whether or not different types of paper affect the airplane's range of flight. Therefore, in the first experiment, the distance the paper travels after being thrown is the dependent variable and the type of paper is the independent variable.
The airplane's design is kept constant so that any differences in flight distance can be attributed to variations in the paper used in the experiment.
To know more about this problem:
https://brainly.com/question/19190155
#SPJ4
how many carbon atoms are in 2.12 mol of propane. how many hydrogen atoms are in 2.12 mol of propane
There are 5,944 carbon atoms in 2.12 moles of propane, and 15,528 hydrogen atoms in 2.12 moles of propane.
What is carbon?
Carbon is an element that occurs in nature and is essential for life. It is the fourth most abundant element in the universe and is present in all living organisms. Carbon exists in many different forms, including graphite, diamond, amorphous carbon, and fullerenes. Carbon is a key component of organic molecules, which are the building blocks of life. Carbon also plays an important role in the global carbon cycle.
To learn more about carbon
https://brainly.com/question/26150306
#SPJ4
At one sewage treatment plant, bacteria cultures produce 1000 L of methane gas per day at 1.0 atm pressure. What volume tank (V2) would be needed to store one day's amount of gas at a pressure of 5.0 atm?
At a pressure of 5.0 atm, IS 200 L of gas would need to be stored in the volume tank (V2).
How to find the volume?The mass of a body can be calculated from its volume using density, and vice versa. The mass is equal to the volume multiplied by the density (M = Vd), whereas the volume is equal to the mass divided by the density (V = M/d). Use a laboratory scale to weigh the masses, or use the density formula D = m/V to convert the solvent volume to mass. Find your ultimate volume by multiplying the solute and solvent masses.Volume, which is measured in cubic units, is the area in three dimensions that matter occupies or that is encircled by a surface. Cubic metres (m3), a derived measure, are used as the SI unit of volume.To learn more about volume, refer to:
https://brainly.com/question/27100414
#SPJ1
A screw has _____ over the cylinder.
corkscrew-shaped ridge
What is a screw’s output?The screw’s applied force (output force) is always larger than the screw’s applied force (input force). As a result, a screw’s mechanical advantage is always larger than one.Screws are a type of basic machine. They have a thread, which is a corkscrew-shaped ridge wrapped around a cylinder. When driving in a screw, the head is particularly designed to allow a screwdriver or wrench to hold the screw.
Another sort of inclined plane is the screw. When an inclined plane wraps around a straight rod-like structure, a spirally grooved surface with a pointed end is generated. It serves to keep things together.
To learn more about screw to refer:
https://brainly.com/question/19552791
#SPJ1
Calculate the frequency of a photon with an energy of 4. 26 x10-19 J and a wavelength of 4. 67 x 10-7m.
[E= 6. 626 x 1034 x frequency C(3. 0 x 108 m/s) = wavelength x frequency]
The frequency of a photon with an energy of 4. 26 x10-19 J and a wavelength of 4. 67 x 10-7m. [E= 6. 626 x 1034 x frequency C(3. 0 x 108 m/s) = wavelength x frequency] is 28.22 × 10¹⁵hz.
So formula is :-
Energy of photon, E=hc/λ or λ=hc/E
E = hν = hc/λ,
Where, h=6.626×10−³⁴Js,c=3×10⁸
By putting all these values, we get:-
4.26× 10-¹⁹ = 6.626×10-³⁴ × ν
v = 4.26 × 6.626 × 10¹⁵
= 28.22 × 10¹⁵ hz
To know more about Wavelength click here
https://brainly.com/question/28995449
#SPJ4
How does the arrangement of atoms affect the classification of matter?
On the basis of arrangement of atoms, the matter is classified into three states: solid, liquid and gas.
In Chemistry, there are three fundamental states of matter based on the arrangement of molecules and atoms inside it.
Generally, solids have strict and rigid arrangement of atoms as they posses strong intermolecular forces and have high melting and boiling points. solids have fixed composition of atoms.
Similarly, liquids have loose arrangement of atoms and molecules keep moving randomly in a liquid. Liquids have low melting and boiling points as compared to solids. Gases have weakest intermolecular forces and atoms are arranged randomly in them. Also, their molecules keep moving in all directions.
If you need to learn more about atoms click here:
https://brainly.com/question/6258301
#SPJ4
Select the correct answer. specific heat is the amount of heat required to raise the temperature of a material by 1°c per what unit?
a. volume
b. joule
c. mass
d. pressure
e. density
Specific heat is the amount of heat required to raise the temperature of a material by 1°c per mass
Specific heat is defined as the amount of heat energy required to elevate the temperature of a material by 1°C per unit mass.
It is a material's physical attribute. The joule per kelvin per kilogram (J/K/Kg) is the standard international measurement of heat capacity.
If a substance has a high specific heat, it simply implies that it will take a long time to heat up, but it will also take a long time to cool down once heated. Water has the highest specific heat value.
Learn more about specific heat here: https://brainly.com/question/27991746
#SPJ4
How would you name this organic compound?
I found a couple ways to name it but I don't know which one's correct.
Which of the following elements can be prepared by electrolysis of their aqueous salts: O copper O fluorine O silver O nitrate O potassium O calcium O iodine
O copper of the following elements can be prepared by electrolysis of their aqueous salts
What are the byproducts of aqueous solution electrolysis?H+ ions are drawn to the cathode during the electrolysis of water, where they pick up electrons to create hydrogen gas. The oxygen gas is formed when OH-ions are drawn to the anode and lose their electrons.
What three byproducts of electrolysis are there?Sodium chloride solution electrolysis is a significant industrial process. Chlorine gas is created at the positive electrode; hydrogen gas is created at the negative electrode; and an alkali is left in the solution as three valuable chemicals.
learn more about electrolysis
https://brainly.com/question/12994141
#SPJ4
What is the name of the systematic approach that scientists use to understand the natural world?
a law
the scientific method
a hypothesis
a theory
It would be due to the scientific method
Hope this helps :)
What do your results tell you about the directing effects of the substituents on salicylamide?
The amide group in salicylamide is electron withdrawing, the hydroxyl group on the ring is a highly active, electron donating substituent. The hydroxyl group donates electrons, guided entry iodide to a para position.
What does the word "substituent" signify in chemistry?A substituent is an atom that are substituted for an atom here on parent chain of such a hydrocarbon in both chemistry and biochemistry constituting a moiety of the resulting new molecule.
Alkyl groups: are they substituents?Alkyl groups are substitutes created from alkanes. The names of alkyl groups and unbranched alkane chains are similar. Alkyl groups may branch as well. For instance, the butyl substituent has three constitutional isomers.
To know more about Substituent visit :
https://brainly.com/question/14970034
#SPJ4
When using a TSO-C129 or TSO-C196 GPS for navigation and instrument approaches, any required alternate airport must have
TSO-C129 and TSO-C196 refer to non-WAAS GPS systems. TSO-C146 refers to WAAS-enabled GPS systems. If non-WAAS GPS is used for navigation and instrument approaches, all required alternate airports must have non-GPS approved operational instrument approach procedures.
TSO-C129 - Airborne Auxiliary Navigation Sensor for Global Positioning System equipment with airborne extensions. TSO-C196 – Auxiliary airborne navigation sensor for GPS units with airborne augmentation.
TSO certification means minimum performance standards for certain materials, parts and equipment used in commercial aircraft. Authorization to manufacture materials, parts, or equipment in accordance with TSO standards is referred to as TSO authorization.
Learn more about auxiliary visit:
brainly.com/question/29756273
#SPJ4
The statement "atoms have a small, dense nucleus" is true. What evidence do scientists use to prove this statement as true?
Most alpha particles shot at gold foil go straight through, without any changes in their direction.
The particles ejected in Thomson's experiment bent away from the negatively charged plates, but toward positively charged plates.
A few alpha particles shot at gold foil bounce in the opposite direction
No matter which element Thomson put in a cathode ray tube, the smae negative particles wit the same properties (such as charge and mass) were ejectected.
In the gold foil experiment, alpha particles shot at gold foil bounced in the opposite direction from a gold foil which indicated atoms have a small, dense nucleus.
What is the gold foil experiment?Rutherford’s α-particle scattering or gold foil experiment changed our perception of the atomic structure of an atom. Rutherford bombarded beams of α-particles at thin gold foil and observed how the α-particles scattered from the gold foil.
Rutherford showed that the atom has the most empty space with the nucleus at the center and electrons rotating around the atomic nucleus. Highly charged α-particles passed straight undeflected through the foil. This will be the expected result if the plum pudding model of Thomson was correct.
A few charged alpha particles were deflected backward direction leading to the positive charge concentrated in a small space.
Learn more about the gold foil experiment, here:
brainly.com/question/4593249
#SPJ1
What element has the largest radius?
Answer:
Francium
Hope this helps :)
What is the freezing point of the solution after you add an additional 1. 34 g (Use i = 2. 5 for MgCl2)
The freezing point of the solution after you add an additional 1.34 g is -0.808°C.
What is freezing point of a solution?A solution's freezing point is lower than the pure solvent's freezing point. This means that for freezing to happen, a solution needs to be cooled to a lower temperature than the pure solvent.
We use the equation: to determine the mass of the solution
Density = mass/volume
1.05 g/ml = mass/ 50ml
mass = 1.05×50
mass = 52.5g.
Percentage of magnesium chloride in the solution is 1.52%
Mass of magnesium chloride in the solution = 1.52 % of 52.5 g
Mass of magnesium chloride in the solution = 1.52/100×52.5
Mass of magnesium chloride in the solution = 0.798g
The following equation is used to determine depression in freezing point:
ΔTf = Freezing point of pure solution - Freezing point of solution
ΔTf = i Kf m
Freezing point of pure solution - Freezing point of solution = i Kf m
m = m solute × 100/M solute × W solvent
Given values,
Freezing point of pure solution (water) is 0°C
i is Vant hoff factor = 2.5
Kf molal freezing point elevation constant = 1.86°C/m
m solute given mass of solute (magnesium chloride) = [0.798 + 1.34] g
m solute = 2.138 g
M solute molar mass of solute (magnesium chloride) = 95.2 g/mol
W solvent mass of solvent (water) = [52.5 - 0.798] g = 51.702 g
substitute the given values,
0 - Freezing point of solution = 1×1.86×2.138×1000/95.2×51.702
Freezing point of solution = -0.808°C.
To know more about freezing point visit:
https://brainly.com/question/14825265
#SPJ4
Complete question is " A 50 mL solution is initially 1.52% MgCl₂ by mass and has a density of 1.05 g/ml
What is the freezing point of the solution after you add an additional 1.34 g MgCl₂? (Use i = 2.5 for MgCl₂)."
Electronegativity Please Fill Out
The propensity of an atom of a certain chemical element to draw shared electrons when forming a chemical bond is known as electronegativity and is denoted by the symbol X.
What are Electronegativity?The atomic number and the separation of the valence electrons from the charged nucleus have an impact on an atom's electronegativity. An atom or a substituent group will draw electrons in greater amounts the higher the associated electronegativity. The sign and amplitude of a bond's chemical polarity, which characterizes a bond along the continuous scale from covalent to ionic bonding, can be quantitatively estimated using electronegativity. The inverse of electronegativity is electropositivity, which describes an element's propensity to accept valence electrons.
Learn more about Electronegativity: https://brainly.com/question/1163776
#SPJ1
Sodium chloride reacts with silver nitrate. Type of reaction ______________________________ Balance chemical equation:
Sodium chloride reacts with silver nitrate. NaCl + AgNO3 → AgCl + NaNO3
intermolecular forces present in it.
The attracting and repellent forces that develop between the molecules of a substance are known as intermolecular forces or IMF for short. Individual molecules of a substance interact with one another through the mediation of these forces.
Most of the physical and chemical features of matter are caused by intermolecular forces.
An intermolecular force is an attractive force that develops between the protons or positive parts of one molecule and the electrons or negative parts of another molecule. This force affects a substance's many physical and chemical properties. The strength of a material's intermolecular forces directly relates to the boiling point of that substance; the stronger the intermolecular forces, the higher the boiling point.
Learn more about Intermolecular forces here:
https://brainly.com/question/9007693
#SPJ4
The potential danger involved with ingesting certain compounds is associated with their solubility in the body's aqueous environment. Which of the following would be most soluble in water ?
A.CH3CH2OH
B. CH3CH2CH2OH
C. CH3OCH2CH3
The solubility of a compound in water is determined by the type of chemical bonds present in the compound and the polarity of the molecule. Thus option B is the correct answer.
Compounds that are polar and have hydrogen bonding capability are more likely to be soluble in water.
In this case, Propanol (CH3CH2CH2OH) has a polar -OH group, which makes it able to form hydrogen bonds with water molecules, and therefore it would be more soluble in water than the other two compounds.
The other two compounds, CH3CH2OH (Ethanol) and CH3OCH2CH3 (Dimethyl ether), also have polar groups, but propanol has the most polar -OH group which is why it would be the most soluble in water.
To learn more about Solubility,
https://brainly.com/question/28850265
#SPJ4
32P has a half life of 14 days calculate the time taken for a given amount of 32P to decay to one - eight of its original activity
The time taken for a given amount of 32P to decay to one-eight of its original activity is 42 days.
A substance's half-life is the amount of time it takes for half of it to decompose. Given that each half-life period diminishes the activity by a factor of 2, if a given amount of a material with a half-life of 14 days decays to one-eighth of its initial activity, it must have gone through three half-life periods. Therefore, it would take 14 x 3 = 42 days for a given amount of 32P to decay to one-eighth of its initial activity.
Learn more about chemical decay at
https://brainly.com/question/10757669
Which of the following require(s) resonance structures to more accurately represent their electron arrangements
The correct representation about resonance structures is that The structure of the species cannot be correctly predicted by a single resonance structure and the only way resonance structures vary is in the way the electrons are arranged.
In valence bond theory, resonance is defined as a hybrid structure formed by combining a variety of contributing structure into a resonance hybrid. Because orbitals overlap, resonance happens. Pi bonds, created when two 2p orbitals overlap, are the building blocks of double bonds. These pi orbitals' electrons are delocalized since they will be dispersed across more than two atoms.
Learn more about Resonance
brainly.com/question/29547999
#SPJ4
An inland area has little water or plant life.
What would the climate of this place likely be?
The inland area has a Continental climate.
Inland climates are typically more severe. Summers might be quite hot, and winters could be very frigid. Rainfall can be scarce.
In inland area the water bodies take long time to heat up and cool down, so they absorb all the heat during the spring and summer when the sun is at its greatest before slowly losing it throughout the fall and winter when the temperature starts to drop.
On the other hand, it warms up and cools down far more quickly on land, that's why the inland are more cooler.
Inland absorbs and releases heat energy more quickly than water, inland places typically experience higher temperature variations from day to night and from season to season, so that inland is hotter area also.
To know more about, Energy click here:
brainly.com/question/1932868
#SPJ4
Lead absorption is decreased by the presence of ______ in the body. a) calcium and vitamin D b) calcium and iron c) iron and selenium
Answer: Correct option is B . calcium and iron decrease the absorption of lead in the body.
Explanation: calcium and iron decrease the absorption of lead in the body without affecting its solubility,probably by competing for shared absorptive receptors in the intestinal mucosa. The total body burden of lead does not affect lead absorption. Thus, lead does not have a feedback mechanism which limits absorption.
The half-life of titanium-44 is 60.0 y. A sample of titanium contains 0.600 g of titanium-44. How much remains after 100.0 y
The amount of titanium-44 remaining will be 1/4 of the original amount, or 0.150 g.
What is amount?Amount is a quantity or magnitude of something, typically money. For example, a person may refer to the "amount of money" they have saved, the "amount of time" it takes to do something, or the "amount of food" they have purchased. Amount can also refer to the total number of something, such as the "amount of people" who have attended an event or the "amount of work" that needs to be done.
The half-life of titanium-44 is 60.0 y, meaning that after every 60.0 y, the amount of titanium-44 will be halved.
0.600 g - 0.150 g = 0.450 g
To learn more about Amount
https://brainly.com/question/25603269
#SPJ4
A chemist has 200 mL of a 10% sucrose solution. If she adds x milliliters of a 40% sucrose solution, what is the percent concentration of the final mixture
The final concentration of the mixture depends on the value of x.
What is value?Value is the worth of something. It can refer to the monetary worth of an item or service, the usefulness of something, or the importance of an idea, belief, or experience. Value is a subjective concept and can vary from person to person. Generally, it is the positive attributes that an individual or group associates with something that determines its value. The economic concept of value is based on the idea that the value of a good or service is determined by its cost, supply, and demand.
The final concentration of the mixture is equal to:
(200 mL x 10%) + (x mL x 40%) / (200 mL + x mL)
To learn more about Value
https://brainly.com/question/25134328
#SPJ4
a balloon initially has a volume of 0.400 L. the temperature is 20.C what will be the volume when he heats the balloon up to 250C
The balloon has a capacity of 0.7 L after being heated to 250°C.
We utilize the Charles' Law equation to determine the system's ultimate volume. According to this rule, the volume of a gas under constant pressure is precisely proportional to its temperature.
Mathematically,
V1/T1 = V2/T2
where,
V1 and T1 are the gas's starting volume and temperature.
V2 and T2 are the gas's ultimate volume and temperature.
We receive:
V1 = 0.4L
T1 = 20.C = (20 + 273)K = 293K
V2=?
T2 = 250.C = (250 + 273)K + 523)K
Using the values in the equation above, we obtain:
0.4/293 = V2/523
V2 = 0.7L.
As a result, the balloon has a capacity of 0.7 L after being heated to 250°C.
To learn more about capacity please click on below link
https://brainly.com/question/15158174
#SPJ4
Why does metal reactivity decrease from left to right?
Metal reactivity decreases on moving from left to right in the modern periodic table due to the decrease in atomic size and inability to lose valence electrons.
Metals have the tendency to lose electrons and form cations. In the modern periodic table, consisting of 7 horizontal periods and 18 vertical groups, when we move left to right across a period, the size of atoms decreases and the nuclear pull also increases due to which the elements cannot readily lose electrons and show metallic property.
Hence, on moving from left to right in a period, metallic character decreases and non-metallic character increases.
To know more about metal reactivity here
https://brainly.com/question/18187589
#SPJ4
*SHOW YOUR WORK*
What is the molarity of a solution made up of 15.5 mol of ammonium sulfate dissolved in enough water to make 45 liters of solution?
Taking into account the definition of molarity, the molarity of a solution made up of 15.5 mol of ammonium sulfate dissolved in enough water to make 45 liters of solution is 0.34 moles/L.
Definition of molarityThe molar concentration is a measure of the concentration of a solute in a solution, be it some molecular, ionic or atomic species and indicates the number of moles of solute contained in one liter of solution.
The molarity of a solution is calculated by:
molarity= number of moles÷ volume
Molarity is expressed in units moles/L.
This caseIn this case, you have:
Number of moles= 15.5 molesVolume= 45 LReplacing in the definition of molarity:
molarity= 15.5 moles÷ 45 L
Solving:
molarity= 0.34 moles/L
Finally, the molarity of the solution is 0.34 moles/L.
Learn more about molarity:
brainly.com/question/9324116
brainly.com/question/10608366
brainly.com/question/7429224
#SPJ1