Do ions with more valence electrons become stable?

Answer:

hiiiiiiiijsiosoaplq

Answer:

Long fur

Explanation:

Long fur is an adaption for the tundra because it is cold and snowy in the tundra, so therefore long fur is an adaption

Answer:

thic long fur that  overs you

Explanation:

Answer:

Please find the detailed explanation below

Explanation:

A scientific method is a sequence of steps that is used to solve a problem. Every scientific method begins with a problem that needs to be solved.

Hence, in order to determine whether water really does take longer to boil if you are watching it, we employ the steps involved in a scientific method.

1) Ask a question/Make observation: This must initiate the process. The observation/question made here is that DOES WATER TAKE LONGER TIME TO BOIL WHEN WATCHED?

2. Formulating hypothesis; an hypothesis is a testable prediction of a possible solution to the stated problem. In this case, an hypothesis could read: IF water is watched while boiling, THEN it will take a longer time to boil. A hypothesis must be tested for it to be proved or disproved.

3. Test hypothesis: The formulated hypothesis is tested via conducting an experiment. The set up of the experiment can involve one group where water is boiled while watching it and another where water is boiled without watching. The former group is called Experimental group, while the latter group is called Control group. The time it takes for each group of water to boil will be recorded.

The independent variable (manipulated variable) will be the WATCHING, while the dependent variable (tested/responding variable) will be the TIME IT TAKES FOR WATER TO BOIL

4. Analyse the data; the data refers to the recorded time for each group of water. This will be analysed and compared.

5. Make conclusion; the conclusion depends on the result, which is the recorded time for each group of boiled water. Based on the result, the hypothesis can either be rejected or accepted. For example, if the control group boils faster than the experimental group, our hypothesis will be accepted but if otherwise, the hypothesis will be rejected.

Therefore, via the scientific method, it can be determined if it really takes longer time for water to boil while watched.

Answer:

Because the enthalpy change of the reaction depends on the states of matter of the substances, they must be shown for each substance in the equation.

Explanation:

The enthalpy of a substance depends on the particular state of matter in which it occurs.

Therefore, in a thermo chemical equation, all the states of matters for all the chemical species in the equation must be accurately written so that the thermo chemical equation can be meaningful.

The correct statement about thermochemical equations is  the enthalpy

change of the reaction depends on the states of matter of the substances,

they must be shown for each substance in the equation.

Enthalpy is defined as the heat change that occurs in a reaction or the sum

of the internal energy present. It is associated with change in matter and  is

dependent on the physical states of the reactants and products.

This is the reason why the physical states such as solid, liquid, gas etc have

to be shown in a thermochemical equation.

Read more about Enthalpy here https://brainly.com/question/5374936

Answer:

A) H2O > HCCH > NH3 > CH3CH3

Explanation:

H2O is known as a neural compound which a pH close to 7.0. This however makes it more acidic due to it having the lowest pH when compared to the others in the option.

The other options however have their acidic strength as follows: HCCH > NH3 > CH3CH3. This explains why the pattern of decreasing acidic strength is H2O > HCCH > NH3 > CH3CH3

Answer: True

Explanation:

Answer:

True

Explanation:

In an ionic reaction, the net ionic equation is used to calculate the standard enthalpy of reaction.

Hence the standard enthalpy of any ionic reaction can be obtained by considering its balanced net ionic reaction equation, hence the answer above.

Answer:

10000

Explanation:

Answer:10,000 meters

Explanation:20x500=10,000

Answer:

3

Explanation:

mass no.=protons+neutrons

mass no.=1+2=3

Kinetic energy is moving energy or the energy of motion.

If an object is moving like a rock rolling down

a mountain, we say the rock has kinetic energy.

Answers:

See attached table

Explanation:

The isotope symbol will have the mass number and chemical symbol.  The atomic number will be equal to the number of protons because the atomic number is the number of protons in an atom.  The electrons will be equal to the protons because the atom is neutral.  The neutrons can be found by subtracting the number of protons from the mass number.  The mass number can be found by adding the protons and neutrons.  It is also in the name of the isotope.

Answer:

oxygen

Explanation:

 The given isotope has 8 protons and 8 electrons, so the atomic number of the given isotope is 8, which is the atomic number of oxygen.

Answer:

Explanation:

The density of a substance can be found by using the formula

From the question

mass of metal = 54.52 g

Volume of metal = new volume - original volume of water in the cylinder

That's

new volume = 28.85 mL

original volume of water = 23.44 mL

Volume of metal

= 28.85 - 23.44 = 5.41 mL

Next we convert the volume from mL to cm³

1 mL = 1 cm³

5.41 mL = 5.41 cm³

Substitute the values into the above formula and solve

That's

We have the final answer as

Hope this helps you

Answer:

Light is produced when an electron moves from a higher to a lower energy level. The color of the light (as we see it) depends on the amount of energy emitted by the electron.

Explanation:

According to the Bohr's model of the atom, energy is given out by an atom when an electron moves from a higher to a lower energy level. The energy of the emitted light is equal to the energy difference between the two energy levels.

Hence ;

∆E= E2 - E1

Where;

E2 = energy of the higher energy level

E1 = energy of the lower energy level.

By supplying light of various frequencies and observing the frequency/wavelength of light emitted by a particular atom, its electron configuration can be determined.

Answer:

5. A. Shape and volume

6. A. Solid to liquid

7. C. Gas

Answer:

[See Below]

Explanation:

✦ Physical Changes:

  ✧ Is when the form changes, but not the chemicals in that form.

  ✧ An example of this would be chopping wood. It's still wood but it's a different size now. It's easier to burn it since it's smaller.

✦ Chemical Changes:

  ✧ Is when the chemicals inside that form change to something else entirely

  ✧ An example would be an egg, when you cook the egg it can turn into being scrambled or fried. But you can't eat the raw egg until the chemicals change.

~Hope this helps Mate. If you need anything feel free to message me.

Answer:

Here is an example of the full report for this type of lab. Includes data table etc. I would suggest making some changes on wording prior to submission

Explanation:

Answer:

[tex]\°C=5.8x10^3\°C[/tex]

[tex]\°F=1.1x10^4\°F[/tex]

Explanation:

Hello,

In this case, for the calculation of the temperature in degree Celsius we subtract 273.15 to the given temperature in kelvins:

[tex]\°C=6100-273.15\\\\\°C=5.8x10^3\°C[/tex]

Next, by applying the following equation we compute it in degree Fahrenheit:

[tex]\°F=(5.8x10^{3}*9/5) + 32\\\\\°F=1.1x10^4\°F[/tex]

Clearly, since the initial unit has two significant figures the computed units also show two significant figures.

Regards.

Answer:

Simply carry out the mixed melting point procedure

1 here grind the two substances mix them

2.take note of the melting point of the mixture this is P

3 also get the original product from a different source okay this is Q

4.so I the melting point of P = Q then they represent a similar compound

5. But if melting point of P is not equal to Q then one of the compounds is P is acting as an impurity so they are not the same

The compound has been similar or not has been determined with the determination of the shift in the melting point of the mixture of the two compounds.

The melting point can be defined as the temperature of the substance when it has been converted from the solid state to the liquid state.

The two substances were found to have the same melting point. The compounds have been determined whether they are similar or not by the determination of the melting point of the combined mixtures.

The compounds A and B have been mixed together, and the melting point has been determined. The similar compounds in mixing will give the same melting point. While if the compounds are different, there has been a shift in the melting point of the mixture.

Thus, the compound has been similar or not has been determined with the determination of the shift in the melting point of the mixture of the two compounds.

For more information about the melting point, refer to the link:

https://brainly.com/question/25512265

Answer:

13.4 milimoles.

Explanation:

The following data were obtained from the question:

Volume = 1.88 L

Molarity = 0.00713 M

Millimoles of NaCN =?

Next, we shall determine the number of mole NaCN in the solution. This can be obtained as follow:

Molarity = mole /Volume

Volume = 1.88 L

Molarity = 0.00713 M

Mole of NaCN =?

Molarity = mole /Volume

0.00713 = moles of NaCN /1.88

Cross multiply

Mole of NaCN = 0.00713 × 1.88

Mole of NaCN = 0.0134 mole

Finally, we shall convert 0.0134 mole to Millimoles. This can be obtained as follow:

1 mole = 1000 millimoles

Therefore,

0.0134 mole = 0.0134 × 1000

0.0134 mole = 13.4 milimoles

Therefore, the millimoles of the solute, NaCN in the solution is 13.4 milimoles

Answer:

Bond order of O22- = 1

Bond order of O22+ = 3

Explanation:

The bond order is given by;

1/2(number of bonding - number of anti bonding electrons).

In O22- , there are ten bonding and eight anti bonding electrons giving a bond order of 1 from; 1/2 (10 - 8) = 1

Similarly, for O22+ , we have ten bonding and four antibonding electrons, hence;

1/2 (10 - 4) = 3

Answer:

a) the element belongs to group 2

b) see image attached

c) Magnesium

d) X3N2

Explanation:

Any ion with the formula X^2+ was derived from group 2 elements. The group two element found in period 3 is magnesium alone.

Since the nitride ion has a valency of -3 and X^2+ has a valency of +2 , then a compound formed between X^2+ and the nitride ion will have the formula X3N2.

a. The group number of the element can be determined by knowing the charge of the ion. In the ion X2+ has a charge of 2+. Since representative elements typically form ions with charges equal to their group numbers, we can conclude that the group number of the element X is 2.

b. The electron-dot symbol, also known as Lewis dot symbol, represents the valence electrons of an element. Since X is a representative element in Group 2, it has two valence electrons.

c. If X is in Period 3, it could be one of the elements from Group 2 in that period. The most likely element would be Magnesium (Mg), as it is the representative element in Group 2 of Period 3.

d. The nitride ion has a charge of 3-. To form a neutral compound, the charges of X and the nitride ion must balance out. Since X has a charge of 2+ and the nitride ion has a charge of 3-, we need two X ions to balance the charge of three nitride ions. Therefore, the formula of the compound formed from X and the nitride ion is X3N2.

To learn more bout the element, follow the link:

https://brainly.com/question/30858299

#SPJ6

Answer:

225 for both answers

Explanation:

The only reason i know this is because i got it wrong. 225

Answer:

225J on both of the questions.

Answer:

The correct answer is B. Transport water.

Explanation:

I did this quiz. :)

Xylem transport water. Therefore, the correct option is option B among all the given options. The vascular tissue of plants called xylem.

The vascular tissue of plants called xylem transports water plus dissolving minerals from the roots towards the rest of the plant while also offering structural support. The tracheary components, a collection of specialized, water-conducting cells, make up xylem tissue.

All vascular plants, along with the seedless club mosses, fern, horsetails, all angiosperms (flowering plants), and gymnosperms, include xylem in addition to phloem (tissue that transports glucose from the leaves to the rest of the plant) (plants with seeds unenclosed in an ovary). Xylem transport water.

Therefore, the correct option is option B.

To learn more about xylem, here:

https://brainly.com/question/15918718

#SPJ6

Answer:

they each have the same number of protons

Answer:they each have the same number of protons

Explanation:

I just took the test

Answer:

they break

Explanation:

Molecules move more freely when it is a liquid state. To keep it a solid, it will bunch together.

Answer:

I think they break.

Explanation:

They do not build a solid to a liquid

Answer:

1) The overlap of the p orbitals of the carbon-carbon π bond would be lost

Explanation:

Unlike simple bonds, a double bond can not rotate, since it is not possible to twist the ends of the molecule without breaking the π bond.

In the structure of but-2-ene present in the attachment, we can see the two isomers, cis and trans. These isomers cannot be interconverted by rotation around the carbon-carbon double bond without breaking the π bond.

Answer:

Types of Potential Energy

Elastic Potential Energy. Anything that can act like a spring or a rubber band can have elastic potential energy. ...

Gravitational Potential Energy. There is a constant attractive force between the Earth and everything surrounding it, due to gravity. ...

Chemical Potential Energy.

(IF THIS HELPED CAN YOU GIVE ME A BRAINYLEST PLEASE?)

Answer:

0.01981 gallons.

Explanation:

In this problem, we need to convert 75 mL of water to gallons.

We know that, 1 gallon = 3785.41 mL

To convert 75 mL to gallons, we must use to the unitary method such that,

1 mL = (1/3785.41) gallon

So,

[tex]75\ mL=75\times \dfrac{1}{3785.41}\\\\=0.01981\ \text{gallons}[/tex]

So, there are 0.01981 gallons in 75 mL of water.