diatomic elements are important. what makes them different from other elemental substances?

4.21 moles of SnO₂ are needed to produce 500.0 grams of Sn for the given reaction.

Tin oxide, is a compound with the formula SnO₂. It is a white or gray powder that is insoluble in water but soluble in strong acids and strong alkalis. Tin oxide is widely used as a pigment in ceramics, glasses, and paints, and in the manufacture of electronic devices such as transistors and solar cells. It is a versatile compound with a wide range of uses and can undergo several important reactions such as: Reduction to tin metal, formation of tin dioxide, formation of tin salts by reaction with acids.

For the given reaction:

SnO₂ + 2H₂ → Sn + 2H₂O

Mole ratio of SnO₂ and Sn is 1:1; this means 1 mole of SnO₂ is required to prepare each mole of Sn.

Now, for the moles of Sn:

n = m/M

Where, n = number of moles

m = mass of Sn (500 g)

M = molar mass of Sn (118.71 g/mol)

n = 500/118.71

n = 4.21 moles

To know more about Tin oxide (SnO₂), visit:

https://brainly.com/question/15384792

#SPJ4

Some examples of evidence that support Darwin's theories of evolution and natural selection , such as fossils and similarities between related living organisms.

Darwin employed certain sorts of evidence to support his hypothesis of natural selection, and these types of evidence are still used today. Examples include fossils and similarities between related living animals. Others, like DNA analysis, were unavailable to Darwin's generation but are now employed by scientists to further our understanding of evolution.  evidence supporting evolution: fossil strata, remains of extinct organisms, similarities between current-day organisms, DNA similarities, and embryonic similarity. Artificial selection, or breeding, is a crucial sort of evidence that Darwin looked at and is being looked at and employed today.

Learn more about  Darwin's theories of evolution .

brainly.com/question/25718754

#SPJ4

As a result of photosynthesis the level of CO₂ decrease and the the level of o2 increase in the environment.

Photosynthesis is a chemical process that occurs in algae, plants and some types of bacteria, when they are exposed to the sunlight. During photosynthesis, water and carbon dioxide will combine to form carbohydrates and gives off oxygen.

During photosynthesis, plants take carbon dioxide from the air. Within the plant cell carbon dioxide is reduced, meaning it gains electrons. This transforms the carbon dioxide into glucose. The plant then releases the oxygen back into the air, and stores energy within the glucose molecules.

Photosynthesis increases the content of the non-structural carbohydrates in the leaves which can lead to grater starch reserves and increased auxin biosynthesis.

To know more about energy here

https://brainly.com/question/1932868

#SPJ4

As with any laboratory work, adequate facility design, operation, and monitoring, as well as excellent work practices, are necessary to protect laboratory staff against the hazard.

Both degrees of protection are based on the principle of ALARA (as little as reasonably possible) exposure. Electricity Risks By adopting adequate measures, the electrocution dangers of electrically powered instruments, tools, and other equipment are nearly completely minimized, therefore their use in the hazard need not represent a serious risk. You need the correct sort of scales if you want to weigh laboratory samples accurately. To accurately weigh the lab samples, for instance, you may use an analytical balance. The reliability of the weighing device will determine how accurate and precise the findings are.

To learn more about laboratory please click on below link

https://brainly.com/question/14428286

#SPJ4

Newton's law of motion that act upon the vehicles at the point of impact is the second law of motion.

Newton's second law of motion states that the force applied to an object is directly proportional to the rate of change of momentum that is produced. Mathematically, we have;

F = m·v - m·u/Δt

Where;

m = The mass of the object

v = The final velocity of the object

u = The initial velocity of the object

Δt = The duration of motion of the object during change in velocity

Therefore, given that the mass, 'M', of the truck is larger than the mass, 'm', of the minivan, where the time of change in velocity Δt, and the initial and final velocities of both automobiles are the same such as in a sudden stop, the garbage ruck will exert more force than the minivan, and therefore, the garbage truck has a greater initial momentum before the automobiles are brought to a stop.

To learn more about momentum check the link below:

https://brainly.com/question/25849204

#SPJ4

Aspartic acid and phenylalanine are the two amino acids that make up aspartame, along with methanol. When the body processes this third key ingredient, formaldehyde and formic acid are produced.

Materials, Raw Two amino acids, phenylalanine and aspartic acid, as well as methanol, make up aspartame. L-aspartyl-L-phenylalanine methyl ester is its formal chemical name. Proteins are made up of amino acids, which are frequently referred to as the building blocks of proteins. Aspartame has the chemical formula C14H18N2O5. In foods and beverages, aspartame, a synthetic, non-saccharide sweetener that is 200 times sweeter than sucrose, is frequently used as a sugar substitute. The commercial names for it are NutraSweet, Equal, and Canderel.

Learn more about aspartame here:

https://brainly.com/question/9352908

#SPJ4

The force of 9.8 N must be applied to a 1 kg puck to make it accelerate on a friction-free air table of 9.8 m/s²​.

Force is the influence that can change the state of the body of motion or rest. The S.I. unit of measurement of force can be written as Newton and force is a vector.

Force can change the direction as well as the speed. The force can be calculated from the mass (m) & acceleration.

F = ma

Given, the mass of the puck, m = 1 Kg

The acceleration  of the puck, a = 9.8 m/s²​

The force acting on the puck can be calculated as:

F = ma = 1 × 9.8

F = 9.8 N

Therefore, the force needed to apply on a puck is equal to 9.8 N.

Learn more about force, here:

brainly.com/question/13191643

#SPJ1

When bonding, atoms try to achieve a stable noble gas configuration.

Atoms are always trying to achieve stability. In the modern periodic table, noble gases present in the group 18 are the most stable. They have a completely filled outermost or the valence shell, that is, it contains 8 valence electrons in its valence shell.

Due to this stable electronic configuration, they are inert in nature, that is, they do not have a tendency to react by sharing or losing their electrons. When participating in a bonding, atoms try to lose or gain electrons to reach their nearest noble gas configuration and attain stability.

To know more about noble gas here

https://brainly.com/question/11414033

#SPJ4

Na+ has one fewer electron than Na, making it smaller and possessing a higher effective nuclear charge.

The fact that sodium ions have just two electron shells makes them smaller than sodium atoms for the main reason (the atom has three). Because they both have the same number of nucleons, the Na+ ion and Na atom have the same nuclear charge. Na+, on the other hand, has a smaller nuclear charge than Na because it has one fewer electron. Na+ is therefore smaller than Na because there is more attraction on the electrons that are already there. A sodium ion's size is smaller than that of a sodium atom.

Learn more about Nuclear Charge

brainly.com/question/17102072

#SPJ4

Aspartyl-phenylalanine-1-methyl ester, also known as the methyl ester of the dipeptide of the amino acids aspartic acid and the essential amino acid phenylalanine, is the term for an artificial, non-carbohydrate sweetener.

Sweeter than sugar flavoring ingredient that is broken down into phenylalanine and aspartic acid. Aspartyl-phenylalanine-1-methyl ester, also known as the methyl ester of the dipeptide of the amino acids aspartic acid and phenylalanine, is a synthetic, non-carbohydrate sweetener known as aspartame. Aspartic acid is a methyl ester of a dipeptide made up of aspartic acid and phenylalanine, two amino acids. Along with methanol, aspartame is entirely hydrolyzed to its individual amino acids in the digestive system. In the body, aspartame is hydrolyzed into aspartic acid (40%) phenylalanine (50%) and methanol (10%). An amino is aspartic acid.

To learn more about phenylalanine please click on below link

https://brainly.com/question/14951426

#SPJ4

one of the BEST actions the US government can take to slow global warming is invest in clean technologies such as wind and solar power

To learn more about global warming refers to:

brainly.com/question/26402403

#SPJ1

The group 17 elements need only one more electron to complete a full octet since they already possess seven valence electrons. whereas group 16 elements needs 2 more electrons that why group 17 more reactive than Group 16

Because they easily acquire an electron to complete their outermost shell, halogens were highly reactive. Since they easily shed the solitary electron in their outermost shell, alkali metals were very reactive.

Since they easily acquire an electron to complete their outermost shell, halogens were highly reactive. Although they easily lose the lone electron within their outermost shell, alkali metals were highly reactive.

Group 17 elements occur only require one electron, therefore they can easily borrow an electron from another element to achieve a stable configuration for a noble gas. They were hence very reactive as well as will rapidly receive an electron to complete their outermost shell.

To know more about halogen elements

https://brainly.com/question/1450671

#SPJ4

No, a mole doesn't equal a molecule. Despite the fact that the terms "moles" and "molecules" are separate, the idea of "moles" can be used to quantify the number of molecules in a sample.

The primary distinction between a mole and a molecule is that a mole is a unit of measurement for amount whereas a molecule is an atomized chemical species.

A mole of a substance is the same number of molecules of that substance as there are carbon-12 atoms in precisely 12 g of the element. This indicates that the molecular weight of any material, stated in terms of atomic mass units, is equivalent to 1 mole of that substance's weight in grams.

Thus, a mole is an amount of 6.02210²³ particles, whereas a molecule has several atoms of different elements that are chemically connected to one another.

To know more about molecule click here

https://brainly.com/question/19922822

#SPJ4

10.0g of CaBr2 contains 0.05 mol according to the equation mole(n) = mass / molar mass (10.0g CaBr2 x 1 mol CaBr2 / 199.88 g CaBr2 = 0.05 mol)

The mole, represented by the symbol mol, is the SI unit of material quantity. One mole is made up of precisely 6.022*1023 elementary components. The Avogadro number, NA, as expressed in mol1, is the fixed numerical expression of the Avogadro number.

The weight in grams of 1 mole of a certain substance is its molar mass. The atomic mass of the chemical unit, expressed in atomic mass units, determines the mass of a substance (amu).

To know more about mole visit :

https://brainly.com/question/28239680

#SPJ4

The enthalpy of the reaction from the bond energy is +102 kJ/mol. Option C

We have to note that the enthalpy would have to do with the energy that ahs been absorbed or the energy that is released in a reaction. We know that if there is a release of energy then we can say that the reaction is exothermic but if we have a case where the energy has been taken in then we can say that the reaction in that case can be said to be exothermic.

We can see that the enthalpy of the reaction can be calculated on the basis of the bond energy when we write;

Energy of bonds that are broken - Energy of bonds that are formed.

[4(410) + 2(496)] - [2(805) + 2(460)]

(1640 + 992) - (1610 + 920)

2632 - 2530

= +102 kJ/mol

Hence, by calculation of the enthalpy bof the reaction, we can see that the reaction would absorb about 102 kJ of heat per mole of the reactant as shown.

Learn more about enthalpy:https://brainly.com/question/13996238

#SPJ1

The gram formula mass of the product, PCl₃, is 137.5 g.

The amount of a compound that has the same mass in grams as the formula mass in an atomic mass unit is said to have the compound's gram formula mass. It is also known as the molar mass.

Every element's atom has a characteristic mass, and each compound's molecule has a characteristic mass determined by the compound's formula.

The gram formula mass of the product PCl₃ is calculated below:

The atomic mass of P = 31 g

The atomic mass of Cl = 35.5 g

The gram formula mass of PCl₃ = 31 + 35.5 * 3

The gram formula mass of PCl₃ = 137.5 g

Learn more about gram formula mass at: https://brainly.com/question/490195

#SPJ1

We used the formula percentage of iron magnetite=(Mass of Fe/Mass of Fe3O4)100%. We then calculated the percentages of iron magnetite (68%) and oxygen magnetite (32%).

Magnetite is a mineral and one of the most important iron ores, with the chemical formula Fe2+Fe3+2O4. It is a ferrimagnetic iron oxide that is attracted to a magnet and can be magnetized to become a permanent magnet. With the exception of extremely rare native iron deposits, it is the most magnetic of all naturally occurring minerals on Earth. Naturally magnetized pieces of magnetite, known as lodestone, will attract small pieces of iron, which is how ancient peoples discovered magnetism.

Magnetite is black or brownish-black with a metallic luster, has a Mohs hardness of 5-6, and leaves a black streak. Magnetite grains are very common in igneous and metamorphic rocks.

Learn more about  Magnetite here:

https://brainly.com/question/29724230

#SPJ4

Diatomic elements are elements that exist as two atoms bound together, usually in the form of a molecule.

Diatomic molecules are molecules composed of two atoms, held together by chemical bonds. They are the simplest type of molecule, and are very common in nature. Examples of diatomic molecules include oxygen (O2), nitrogen (N2), hydrogen (H2), chlorine (Cl2), and iodine (I2). Diatomic molecules have a wide range of applications in various industries, such as medicine, chemistry, engineering, and energy.

This differs from other elemental substances because those substances contain only one atom. Diatomic elements are very common in nature and make up a large percentage of the atmosphere. They also have unique properties because of the two atoms being bound together. Diatomic elements are an important part of many everyday processes, from respiration to combustion to corrosion.

To learn more about Diatomic
https://brainly.com/question/1611262
#SPJ4

1.53 × 10⁻⁵ moles of aspartame are present in 4.50 mg of aspartame.

Two amino acids, aspartic acid and phenylalanine, make up the low-calorie sweetener known as aspartame. In addition to being present in tabletop sweetener packets, aspartame is a common component used to substitute sugar in low-calorie foods and beverages.

Here there are 4.50 mg of aspartame.

First, the mass is converted from mg to g by:

1 g = 1000 mg

So, 1 mg = 0.001 g

So, 4.5 mg = 4.5 × 10⁻³ g

Molar mass of aspartame = 294.40 g/mol

So, Number of moles of aspartame = [tex]\frac{Given mass}{Molar mass}[/tex]

or, n = 4.5 × 10⁻³ / 294.3

or, n = 1.53 × 10⁻⁵ moles.

Hence, 4.50 mg of aspartame has 1.53 × 10⁻⁵ moles of aspartame.

To know more about aspartame from the link

brainly.com/question/26727229

#SPJ4

The amount of suplher in grams to rpoduce 25.9 kJ energy= 10.95g

Here the reaction is,

S(s) + 2CO(g)  

Hrxn=-75.8 kJ energy.

Answer,

The amount of Sulpher in grams to produce 25.9 kJ energy=  xg=? 

We know that 1mole Sulpher results in the production of \ bigtri angle up Hrxn=75.8 kJ/mol energy.

25.9 kJ of energy produced from how many grams of sulpher= 25.9 kJ / 75.8 kJ/mol = 25.9g/75.8g/mol

                                                                                                                                     =0.34 mol of sulpher

The amount of 0.34 moles of sulpher in grams= Number of moles * Molar mass 

( Molar mss of Sulpher= 32.06g'/mol)

= 0.34mols * 32.06g /mol

=10.95 g

 The amount of suplher in grams to rpoduce 25.9 kJ energy= 10.95g

To know more about energy visit:

https://brainly.com/question/1932868

#SPJ1

An alpha helix is a type of secondary structure in proteins. It is a right-handed, coiled-coil structure that is stabilized by hydrogen bonds between the peptide backbone amide nitrogen and carbonyl oxygens of every fourth residue.

1st residue hydrogen-bonded to 5th residue (that is, residue n is H-bonded to residue n+4) - Alpha Helix

All NH groups point in the same direction - Beta Sheet

successive R groups point in opposite directions - Beta Sheet

1st residue (that is, residue n is hydrogen bonded to residue n+3) - Beta Turn

All contains-NH hydrogen bonded to C=O - Alpha Helix

In summary, the first phrase describes an Alpha Helix, the second and third phrases describe Beta Sheets, and the fourth phrase describes a Beta Turn, the fifth phrase also describes an Alpha Helix.

Learn more about Alpha Helix here:

https://brainly.com/question/14465166

#SPJ4

Mole measure the number of elementary entities of a given substance that are present in a given sample. Therefore, theoretical yield of Al[tex]_2[/tex]O[tex]_3[/tex] is 136g.

The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number. The stoichiometry represents the number of moles.

4AI + 3O[tex]_2[/tex]→ 2Al[tex]_2[/tex]O[tex]_3[/tex]

moles of  Al =54/26=2.07

moles of  O[tex]_2[/tex]=64/32=2

Since oxygen is limiting reagent, so product will be according to oxygen

Theoretical yield of Al[tex]_2[/tex]O[tex]_3[/tex]=136g

Therefore, theoretical yield of Al[tex]_2[/tex]O[tex]_3[/tex] is 136g.

To know more about mole, here:

brainly.com/question/15209553

#SPJ1

The order of increasing radius is:  Na+ < Rb+ < Br-

The radius of an atom or ion is a measure of the size of the atomic nucleus and the electron cloud that surrounds it. The radius of an atom or ion can be affected by various factors such as the number of protons, neutrons and electrons it has, as well as the electron configuration. In general, as we move from left to right across the periodic table, atomic radius tends to increase.

In the case of the three ions you provided, Br-, Na+ and Rb+ , the order of increasing radius is as follows:

Na+ has the smallest atomic radius among the three, as it has lost one electron and become a positive ion, the removal of the electron increases the effective nuclear charge, making the electron cloud more tightly held.

Rb+ has a slightly larger atomic radius than Na+ as it has one more electron and one more proton in its nucleus than Na+, making the electron cloud slightly less tightly held.

Br- has the largest atomic radius among the three as it has gained an electron and become a negative ion, the addition of the electron decreases the effective nuclear charge, making the electron cloud less tightly held.

Learn more about Radius:

https://brainly.com/question/29440273

#SPJ4

Because of its simplicity, comparatively low cost, great sensitivity, and rapid separation, TLC is an extensively used analytical method.

Using a thin stationary phase supported by an inert backing, thin layer chromatography (TLC) is a chromatographic technique used to separate the components of a mixture. It can be carried out on an analytical scale to track the development of a reaction or on a preparative scale to purify minute quantities of a chemical. Similar to all chromatography, TLC works on the premise that a chemical will have varying affinities for the mobile and stationary phases, which will influence how quickly it migrates. TLC aims to produce well-defined, well-separated spots.

Learn more about reaction here-

https://brainly.com/question/28984750

#SPJ4

 Phlogiston theory is wrong as it states that when petrol burns in air phlogiston is lost in  air so the mass decreases but as per law of conservation of mass , mass never increases or decreases rather it is constant.

According to law of conservation of mass, it is evident that mass is neither created nor destroyed rather it is restored at the end of a chemical reaction .

Law needs to be modified in accordance with laws of quantum mechanics under the principle of mass and energy equivalence.This law was proposed by Antoine Lavoisier in the year 1789.

Learn more about law of conservation of mass,here:

https://brainly.com/question/28711001

#SPJ1

The two quantities in this module for which we will develop unit factors to do dimensional analysis with chemical substances are volume and mass.

What is Volume?

Volume is a measure of the amount of three-dimensional space occupied by an object or substance. It is often measured in liters, cubic centimeters, or cubic meters. Volume is used to measure the capacity of a container, the size of an object, or the amount of liquid or gas in a given space. It is also used to determine the mass of an object, as the density (mass per unit volume) is often known.

The two quantities of volume and mass are important for doing dimensional analysis with chemical substances because they help to measure the amount of a substance in different units. Volume is important for measuring the quantity of liquid substances, and mass is important for measuring the quantity of solid substances. Both of these quantities are necessary for accurate and precise measurements of chemical substances, making them essential for dimensional analysis.

To know more about volume,

https://brainly.com/question/14197390

#SPJ4

The fourth and fifth periods contain 18 elements rather than 8 as observed in the second and third period because of the accommodation of 10 additional electrons in the 3d orbital.

The number of orbitals that can be accommodated by s subshell is one, p subshell is three, d subshell is five and f subshell is seven.

In the second and the third period, the 2s subshell is filled with two electrons, 2p subshell with six electrons .So, the second period contains eight elements. The sequence in third period is similar to that of second period with additional filling of 3s and 3p subshell.

In the fourth period, electrons are first filled in the 4s subshell, only after that they can be filled in the 3d subshell. So, fourth period contains 18 elements , which is due to the additional 10 electrons in 3d subshell. This is similar in the case of fifth period also.

To know more about fourth and fifth period elements here

https://brainly.com/question/23277752

#SPJ4

[Ar]4s23d6 the electron configuration of the metal ion in Fe(NO3)3.

The noble gas krypton, which is isoelectronic with As arsenic 3 ion (As3), is isoelectronic with [Ar]3d104s2sp6 because it has gained three electrons.

Transition-metal ions are frequently referred to as having dn configurations because their valence electrons are mostly found in d orbitals. For instance, it is claimed that the Co3+ and Fe2+ ions have a d6 configuration.

The number of protons in the atomic nuclei of arsenic, abbreviated As, is 33. 33 electrons would likewise be present in a neutral As atom.

learn more about electron configuration

https://brainly.com/question/26084288

#SPJ4

Answer:

          i)  Neon (Ne)

           ii)  Fluoride Ion (F⁻¹)

            iii)  Oxide Ion  (O⁻²)

Explanation:

                  Ions are those charged species which are either positively charged (by loosing electrons) called as cations or negatively charged (by gaining electrons) called as anions.

                 In given examples, Neon is a neutral atom which has an atomic number 10. It contains 10 electrons in its neutral state with the electronic configuration 1s², 2s², 2p⁶.

                 Fluorine atom has an atomic number of 9. Therefore, it contains 9 electrons in its neutral state with an electronic configuration of 1s², 2s², 2p⁵. When Fluorine atom gains one electron it gets 10 electrons with electronic configuration of 1s², 2s², 2p⁶.

                Oxygen atom has an atomic number of 8. Therefore, it contains 8 electrons in its neutral state with an electronic configuration of 1s², 2s², 2p⁴. When Oxygen atom gains two electron it gets 10 electrons with electronic configuration of 1s², 2s², 2p⁶ forming an Oxide Ion.

Answer:

I think Option no D is the suitable answer