Determine the remaining sides and angles of the triangle ABC. A = 130° 50', C = 20° 10', AB = 6 %3 B=BC =(Do not round until the final answer. Then round to the nearest hundredth as needed.)AC = (Do not round until the final answer. Then round to the nearest hundredth as needed.)

The relationship between arithmetic mean return, geometric mean return, and variability of returns is they all provide different insights into the performance of an investment.

The arithmetic mean return and geometric mean return are two commonly used measures of investment returns. The arithmetic mean return is calculated by adding up all the returns over a period of time and dividing by the number of returns. The geometric mean return, on the other hand, takes into account the compounding effect of returns over time. It is calculated by multiplying all the returns over a period of time and taking the nth root, where n is the number of returns.

The variability of returns refers to the degree of fluctuation in investment returns over a period of time. This variability can be measured using standard deviation or variance.

The relationship among arithmetic mean return, geometric mean return, and variability of returns is that they all provide different insights into the performance of an investment. The arithmetic mean return is a simple measure of the average return over a period of time, while the geometric mean return takes into account the effect of compounding. The variability of returns, measured by standard deviation or variance, provides an indication of the risk associated with an investment.

Investments with high variability of returns are generally considered riskier than those with low variability. When comparing two investments with the same arithmetic mean return, the one with a higher geometric mean return will generally be preferred because it indicates that the investment has been compounding at a higher rate. Overall, it is important to consider all three measures when evaluating the performance of an investment.

Learn more about ARITHMETIC AND GEOMETRIC SEQUENCES : https://brainly.com/question/8195467

#SPJ11

A committee consists of 11 men and 12 women. In 304,920 ways can a subcommittee of 4 men and 6 women be chosen

To solve this problem, we will use the combination formula:

nCr = n! / (r! * (n-r)!)

where n is the total number of people (in this case, 23), r is the number of people we want to choose (4 men and 6 women), and ! means factorial (the product of all positive integers up to that number).

First, we need to find the number of ways we can choose 4 men from the 11 available. This is:

11C4 = 11! / (4! * 7!) = 330

Next, we need to find the number of ways we can choose 6 women from the 12 available. This is:

12C6 = 12! / (6! * 6!) = 924

To find the total number of ways we can choose a subcommittee of 4 men and 6 women, we need to multiply these two numbers:

330 * 924 = 304,920

Know more about factorial here:

https://brainly.com/question/18123987

#SPJ11

The number of dimes students has is 12 dimes.

We are given that;

Ratio= 2:3

Cost= $1.60

This is a question that can be solved using a system of linear equations. Let x be the number of nickels and y be the number of dimes. Then we have:

0.05x+0.10y=1.60

for the total amount of money, and

yx​=32​

for the ratio of nickels to dimes. To solve this system, we can use the substitution method. First, we isolate x in the second equation:

x=32​y

Then we substitute this expression for x in the first equation:

0.05(32​y)+0.10y=1.60

Simplifying, we get:

301​y+101​y=1.60

Adding the fractions, we get:

304​y=1.60

Multiplying both sides by 30, we get:

4y=48

Dividing both sides by 4, we get:

y=12

The student has 12 dimes.

Therefore, by the given ratio the answer will 12 dimes.

Learn more about the ratio here:

brainly.com/question/13419413

#SPJ1

This matrix can be used to perform the reflection of any vector in the line y = x, by multiplying the vector by the matrix.

What is Matrix?

A matrix is a rectangular array or table of numbers or symbols that are arranged in rows and columns. The numbers or symbols in a matrix are called its elements or entries. Matrices are used in various areas of mathematics, science, engineering, and other fields to represent and manipulate data, perform transformations, solve equations, and model real-world phenomena.

To find the standard matrix of the given linear transformation from[tex]R^{2}[/tex] to [tex]R^{2}[/tex] we can use the fact that the standard basis vectors i = (1, 0) and j = (0, 1) are transformed into the vectors that are reflections of themselves in the line y = x.

The image of i is obtained by reflecting i across the line y = x, which gives us the vector (0, 1). Similarly, the image of j is obtained by reflecting j across the line y = x, which gives us the vector (1, 0).

Therefore, the standard matrix of the linear transformation is:

| 0 1 |

| 1 0 |

Learn more about Matrix

https://brainly.com/question/94574

#SPJ1

Answer:

The median is number 12!!!!

A) The estimated cost per year for Jorden would be:

   $X - ($7,500 + $3,700)

B) Jo needs to contribute each year:

    65% of $Y = 0.65 * $Y

Estimating cost means to calculate the approximate amount of money required for a particular expense or project.

It may involve considering various factors, such as known costs, expected expenses, and potential variables that may affect the final cost.

To estimate Jorden's cost per year, we need to subtract the scholarships, grants, and work-study earnings from the total cost of attendance. Let's assume the total cost of attendance is $X.

Given:

Scholarships and grants = $7,500 per year

Work-study earnings = $3,700 per year

So, the estimated cost per year for Jorden would be:

$X - ($7,500 + $3,700)

B) To calculate Jo's contribution, we need to find 65% of the estimated cost per year. Let's assume the estimated cost per year is $Y.

Given:

Estimated cost per year = $Y

Family contribution percentage = 65%

So, Jo's contribution per year would be:

65% of $Y = 0.65 * $Y

Read more about estimating costs at brainly.com/question/28621647.

#SPJ1

The required answer is alpha = 2.31 rad/s^2

To find the angular acceleration of the propeller, we can use the formula:

angular acceleration (alpha) = (final angular speed - initial angular speed) / time
Angular acceleration is measured in units of angle per unit time squared (which in SI units is radians per second squared), and is usually represented by the symbol alpha (α). In two dimensions, angular acceleration is a pseudoscalar whose sign is taken to be positive if the angular speed increases counterclockwise or decreases clockwise, and is taken to be negative.

It should be noted that angular acceleration simply means the time rate for change of the angular velocity.
Plugging in the given values, we get:

alpha = (39 rad/s - 10 rad/s) / (2.0 revolutions * 2*pi rad/revolution)

Simplifying the denominator, we get:

alpha = (39 rad/s - 10 rad/s) / (12.57 rad)

Calculating the numerator, we get:

alpha = 29 rad/s / 12.57 rad

Simplifying, we get:

alpha = 2.31 rad/s^2
Therefore, the angular acceleration of the propeller is 2.31 rad/s^2, expressed using two significant figures.

To find the angular acceleration of the propeller, we can use the following formula:
angular acceleration (α) = (final angular speed - initial angular speed) / time
It should be noted that angular acceleration simply means the time rate for change of the angular velocity.

Given that the angular speed increases from 10 rad/s to 39 rad/s in 2.0 revolutions, we first need to convert revolutions to time. To do this, we can use the following relationship:

angular speed = angular distance / time

Let's solve for time:

time = angular distance / angular speed

We are given the initial angular speed (10 rad/s) and the angular distance (2.0 revolutions). We need to convert revolutions to radians:

angular distance = 2.0 revolutions * 2π radians/revolution ≈ 12.57 radians

Now we can find the time taken for the 2.0 revolutions:

time = 12.57 radians / 10 rad/s = 1.257 s
angular acceleration refers to the time rate of change of angular velocity. As there are two types of angular velocity, namely spin angular velocity and orbital angular velocity,

Now that we have the time, we can find the angular acceleration:

α = (39 rad/s - 10 rad/s) / 1.257 s ≈ 23.07 rad/s²

Expressing the answer using two significant figures:

α ≈ 23 rad/s²

So, the angular acceleration of the propeller is approximately 23 rad/s².

To know more about angular acceleration . Click on the link.

https://brainly.com/question/1592013

#SPJ11

The sequence an=(9n)/√(n^2+1) converges to 9/sqrt(1+1)=9/sqrt(2)=9√2/2, so the answer is (a) converges to (9√2)/2.

To see why, we can use the limit comparison test, comparing to a similar sequence bn = 9n/sqrt(n^2), which simplifies to bn = 9/sqrt(n). Since the limit as n approaches infinity of bn is 0, we can use this to find the limit of an by taking the limit of the ratio an/bn:

lim(n->inf) an/bn = lim(n->inf) [(9n)/√(n^2+1)] / [9/sqrt(n)]
= lim(n->inf) sqrt(n) * (n/sqrt(n^2+1))
= lim(n->inf) (n/sqrt(n^2+1)) (since sqrt(n) approaches infinity as n approaches infinity)
= lim(n->inf) (1/sqrt(1+(1/n^2))) = 1/sqrt(1+0) = 1/sqrt(1) = 1.

Since this limit is finite and nonzero, we can conclude that the sequence converges, and its limit is 9/sqrt(2).

To learn more about limit comparison, visit:

https://brainly.com/question/30758037

#SPJ11

Tthe 99th percentile for the average number of residents within five miles of each store in a sample of 50 stores is: x = μ + z*SE = 17 + 2.326*0.4949 = 18.1662. Rounding to the nearest tenth, the answer is 18.2 thousand residents.

To find the 99th percentile for the average number of residents within five miles of each store in a sample of 50 stores, we need to use the z-score formula:

z = (X - μ) / (σ / √n)

In this case, the mean (μ) is 17,000 and the standard deviation (σ) is 3,500. The sample size (n) is 50 stores.

First, we need to find the z-value for the 99th percentile. Based on the z-table, the z-value for the 99th percentile is approximately 2.33.

Now we can use the z-score formula to find X, the 99th percentile for the average number of residents:

X = μ + z * (σ / √n)

X = 17,000 + 2.33 * (3,500 / √50)

X = 17,000 + 2.33 * (3,500 / 7.071)

X = 17,000 + 2.33 * 495.4

X = 17,000 + 1,153.4

X = 18,153.4

Since we need to provide the answer in thousands and round to the nearest tenth, the 99th percentile for the average number of residents within five miles of each store in a sample of 50 stores is approximately 18.2 thousand residents.

Learn more about standard deviation here: brainly.com/question/23907081

#SPJ11

Answer:

x = 30 , interior angle = 120

Step-by-step explanation:

the sum of the exterior angles of a polygon = 360°

since the hexagon is regular then exterior angles are congruent , then

6 × 2x = 360

12x = 360 ( divide both sides by 12 )

x = 30

then each exterior angle = 2x = 2 × 30 = 60°

the sum of exterior angle and interior angle = 180° , that is

interior angle + 60° = 180° ( subtract 60° from both sides )

interior angle = 120°

Step-by-step explanation:

I'm sorry, but I would need some additional information to determine when Maya arrived in L.A. Specifically, I would need to know the distance from Maya's starting point to L.A. Without knowing this distance, it is not possible to determine how long the journey would take and what time Maya would arrive.

However, if we assume that the distance from Maya's starting point to L.A. is 400 km, for example, then we can calculate that she would arrive at 8:00 pm (6 hours after starting) by dividing the distance by her speed:

Time = Distance ÷ Speed

Time = 400 km ÷ 80 km/h

Time = 5 hours

Since Maya started driving at 2 pm, we can add the 5 hours of driving time to find that she would arrive at 7 pm:

Arrival time = Starting time + Driving time

Arrival time = 2 pm + 5 hours

Arrival time = 7 pm

Again, please note that the actual arrival time would depend on the actual distance between Maya's starting point and L.A.

The probability is 4/9.

What is the probability?

The probability of an occurrence is a figure that represents how likely it is that the event will take place. In terms of percentage notation, it is expressed as a number between 0 and 1, or between 0% and 100%. The higher the likelihood, the more likely it is that the event will take place.

Here, we have

Given: A set of 3 cards, spelling the word ADD, are placed face down on the table.

we have to determine the probability of selecting two cards with D and D.

P(D) = Number of favorable outcomes to D / Total number of possible outcomes

Number of favorable outcomes to D = 2

Number of possible outcomes = 3

P(D) = 2/3

The probability of selecting two cards that have D and D with replacement is

P(D, D) = P(D) × P(D)

P(D, D) = 2/3 × 2/3

P(D, D) = 4/9

Hence, the probability is 4/9.

To learn more about the probability from the given link

https://brainly.com/question/24756209

#SPJ1

To determine if there are any outliers in the data, we can use the Interquartile Range (IQR) method. The IQR is the range between the first quartile (Q1) and the third quartile (Q3). Here's a step-by-step explanation:

Step 1: Calculate the IQR. IQR = Q3 - Q1 = 18.0 - 15.0 = 3.0

Step 2: Find the lower and upper bounds for outliers.

Lower Bound = Q1 - 1.5 * IQR = 15.0 - 1.5 * 3.0 = 15.0 - 4.5 = 10.5

Upper Bound = Q3 + 1.5 * IQR = 18.0 + 1.5 * 3.0 = 18.0 + 4.5 = 22.5

Step 3: Compare the bounds to the minimum and maximum values. The minimum value (13.0) is greater than the lower bound (10.5) and the maximum value (22.0) is less than the upper bound (22.5).

Since both the minimum and maximum values are within the bounds, we know that there are no outliers in the data.

So, the correct answer is: A) there are no outliers in the data.

Know more about Interquartile Range (IQR),

https://brainly.com/question/28922347

#SPJ11

The Wronskian of the functions e and e(3x) is 2e(4x).

The Wronskian of the functions e^x and e^(3x) is found by computing the determinant of the matrix formed by their derivatives. In this case, the Wronskian is:

W(e^x, e^(3x)) = |(d/dx)e^x   (d/dx)e^(3x)|
                      |e^x         3e^(3x)|

Now, compute the determinant:

W(e^x, e^(3x)) = e^x(3e^(3x)) - e^(3x)e^x
W(e^x, e^(3x)) = 2e^(4x)

Know more about Wronskian of the functions here:

https://brainly.com/question/8472385

#SPJ11

The sunfish gains 2/7 of it's mass every 0.5 days.

An exponential function has the definition presented as follows:

y = ab^x.

In which the parameters are given as follows:

The growth rate after t days is given as follows:

(81/49)

When the sunfish gains 2/7 of it's mass, the fraction change is given as follows:

1 + 2/7 = 7/7 + 2/7 = 9/7.

Hence the number of days is obtained as follows:

9/7 = (81/49)^x

(9/7)^2x = 9/7

2x = 1

x = 0.5.

More can be learned about exponential functions at brainly.com/question/2456547

#SPJ1

Answer: The sunfish gains 2/7 of it's mass every 0.5 days.

How to define an exponential function?

An exponential function has the definition presented as follows:

y = ab^x.

In which the parameters are given as follows:

a is the value of y when x = 0.

b is the rate of change.

The growth rate after t days is given as follows:

(81/49)

When the sunfish gains 2/7 of it's mass, the fraction change is given as follows:

1 + 2/7 = 7/7 + 2/7 = 9/7.

Hence the number of days is obtained as follows:

9/7 = (81/49)^x

(9/7)^2x = 9/7

2x = 1

x = 0.5.

More can be learned about exponential functions at brainly.com/question/2456547

#SPJ1

The power of ten is basic concept to solve the largest numbers. The number 1,23456789 x 10⁻⁶is not the same value as 1,23456789000000. So, option(d) is right one.

The powers of 10 refer to the numbers in which the base is 10 and the exponent is an integer. Exponent and power concept is used to simplify the smallest and largest number. For example, 10², 10³ shows different powers of 10. The formula for powers of 10 is 10ˣ , where x is an integer.

We have a number 1,23456789 x 10⁻⁶

As we know, 10⁻ˣ is written as '0 decimal point followed by (x -1) number of zeros followed by 1". We can write the power expansion, 10⁻⁶ = 0.000001. So, the above expression can be represent flin following forms,

Hence, we cannot write it in form of 1,23456789000000.

For more information about power of ten, visit :

https://brainly.com/question/25617198

#SPJ4

Complete question:

1,23456789 x 10^{-6} is not the same value as

a) 1,23456789/1000000

b)1,23.456789

c) 1,23456789/10⁶

d) 1,23456789000000

Step-by-step explanation:

Remember for RIGHT triangles   sin Φ = opposite leg / hypotenuse

then  

sin x =  6 sqrt(105) / (12 sqrt (35))

arcsin (  6 sqrt(105) / (12 sqrt (35)) ) = x = 60 degrees

Based on the given sample, the number of voters vote for the incumbent are 1,200,000.

Based on the sample, it can be estimated that approximately 1,200,000 of the 2,000,000 voters will vote for the incumbent.

This can be calculated by taking the sample size of 10 and multiplying it by the proportion of votes that the incumbent received (6/10).

This gives a result of 6/10 x 2,000,000 = 1,200,000.

However, it is important to note that this is just an estimate and the actual number of votes for the incumbent could be higher or lower than 1,200,000.

Therefore, based on the given sample, the number of voters vote for the incumbent are 1,200,000.

Learn more about the random sample here:

https://brainly.com/question/12719656.

#SPJ1

Let's say Dali's walking speed is x and his running speed is 3x.

In the morning, let's say the total distance is d. Therefore, Dali walks d/2 with speed x and runs d/2 with speed 3x. The time it takes for him to complete this distance is given by:

d/2x + d/2(3x) = 24

Simplifying this equation, we get:

d = 3x(8)

d = 24x

So, the total distance Dali covers in the morning is 24x.

After school, let's say the distance from school to home is d'. Therefore, Dali walks d'/2 with speed x and runs d'/2 with speed 3x. The time it takes for him to complete this distance is given by:

d'/2x + d'/2(3x) = ?

We don't know how much time it takes Dali to get home, so we'll leave the right-hand side of the equation blank for now.

Now, let's look at the ratios of Dali's walking and running speeds:

Walking speed : Running speed = x : 3x = 1 : 3

This means that for every 4 parts of the distance Dali covers, he walks one part and runs three parts. So, we can write:

d' = 4y, where y is the distance Dali walks

This also means that Dali spends one-fourth of the total time walking and three-fourths running. So, we can write:

d'/2x + d'/2(3x) = (1/4)t + (3/4)t, where t is the total time it takes Dali to get home

Simplifying this equation, we get:

2d' = 2t(x + 3x)

4y = 8tx

y = 2tx

Substituting this value of y in the equation d' = 4y, we get:

d' = 8tx

So, the total distance Dali covers in the afternoon is 8tx.

Now, we have two equations:

d = 24x

d' = 8tx

We need to simplify these equations further to find the value of t (the total time it takes Dali to get home).

From the first equation, we get:

x = d/24

Substituting this value of x in the second equation, we get:

d' = 8t(d/24)

d' = (1/3)dt

So, the total distance Dali covers in the afternoon is (1/3)dt.

Now, we can equate the two expressions we have for d':

d' = 8tx = (1/3)dt

Simplifying this equation, we get:

24x = t

Therefore, it takes Dali 24 minutes to get home.

Answer:

2(3/8) + 4/8 + 5/8 + 7/8

= 6/8 + 4/8 + 5/8 + 7/8 = 22/8 = 2 6/8

B is correct.

To find the answers, we need to calculate the number of steps each player takes before they are unable to continue:

For Amar:

5 stairs up and 2 stairs down per turn

Net gain of 3 stairs per turn

It will take 32 turns to reach 96 stairs (32 * 3 = 96)

In the 33rd turn, Amar will climb 5 stairs and reach 100 stairs.

For Akbar:

7 stairs up and 2 stairs down per turn

Net gain of 5 stairs per turn

It will take 19 turns to reach 95 stairs (19 * 5 = 95)

In the 20th turn, Akbar will climb 7 stairs and reach 100 stairs.

For Anthony:

10 stairs up and 3 stairs down per turn

Net gain of 7 stairs per turn

It will take 14 turns to reach 98 stairs (14 * 7 = 98)

In the 15th turn, Anthony will climb 10 stairs and reach 100 stairs.

I) The players will meet on the same stair whenever they end up on a stair whose number is the same for any two players. To find out the number of times they meet on the same stair, we need to calculate the lowest common multiple (LCM) of the number of turns taken by each player to reach 100 stairs.

Amar takes 33 turns

Akbar takes 20 turns

Anthony takes 15 turns

LCM(33,20,15) = 660

Therefore, they will meet on the same stair 660/33 + 660/20 + 660/15 = 20 + 33 + 44 = 97 times.

II) Anthony takes the least number of steps to reach near hundred, as he only needs 15 turns to reach 98 stairs.

Emma is currently 21 years old.

Let's denote Emma's age as E and Claire's age as C. We are given the following information:

The age of a person can be counted differently in different cultures. This calculator is based on the most common age system. In this system, age increases on a person's birthday. For example, the age of a person who has lived for 3 years and 11 months is 3, and their age will increase to 4 on their next birthday one month later. Most western countries use this age system.

1. When Emma was born, Claire was E years old.
2. Currently, Claire is 42 years old (C = 42).

Since Emma is currently the same age as Claire was when Emma was born, we can say E = C - E.

Now let's solve for E:

E = 42 - E
2E = 42
E = 21

So, Emma is currently 21 years old.

Visit here to learn more about  age:

brainly.com/question/29963980

#SPJ11

The general solution to the differential equation y''' - 2y'' - 8y = 0 is [tex]y(t) = c1 e^{(4t)} + c2 e^{(-t)} + c3 t e^{(-t).[/tex]

To find the general solution of the given differential equation:

y''' - 2y'' - 8y = 0

We first find the characteristic equation by assuming a solution of the form:

y = [tex]e^{(rt)}[/tex]

where r is a constant to be determined.

Substituting this solution into the differential equation, we get:

[tex]r^3 e^{(rt)} - 2r^2 e^{(rt)} - 8e^{(rt)} = 0[/tex]

Dividing both sides by [tex]e^{(rt)[/tex], we get:

r³ - 2r² - 8 = 0

This is the characteristic equation, which we can solve for r using factoring or the quadratic formula. Factoring gives:

(r - 4)(r + 1)² = 0

So the roots are:

r = 4 (with multiplicity 1)

r = -1 (with multiplicity 2)

Therefore, the general solution to the differential equation is:

[tex]y(t) = c1 e^{(4t)} + c2 e^{(-t)} + c3 t e^{(-t).[/tex]

where c1, c2, and c3 are constants determined by the initial or boundary conditions of the problem.

Know more about general solution here:

https://brainly.com/question/13609544

#SPJ11

The magnitude of an earthquake 25 times as strong as a 4.2 earthquake would be 6.3 on the Richter scale. If a small earthquake measures 4.2 on the Richter scale, the magnitude of an earthquake 25 times as strong will be 6.3 on the Richter scale.

The Richter scale measures the magnitude of an earthquake, which is a logarithmic scale. This means that each increase of one on the Richter scale corresponds to a ten-fold increase in the amplitude of the earthquake waves.
If a small earthquake measures 4.2 on the Richter scale, an earthquake 25 times as strong would have an amplitude that is 25 times greater than the amplitude of the 4.2 earthquakes.
To find the magnitude of the stronger earthquake, we need to determine how many times greater the amplitude of the 25 times stronger earthquake is than the amplitude of the 4.2 earthquakes.
25 times stronger = 25 x 10 = 250 (because each increase of one on the Richter scale corresponds to a ten-fold increase in amplitude)
So the magnitude of the 25 times stronger earthquake can be calculated using the formula:
M2 = M1 + log(A2/A1)
Where M1 is the magnitude of the 4.2 earthquakes, A1 is its amplitude, A2 is the amplitude of the 25 times stronger earthquake, and M2 is the magnitude we want to find.
Substituting the values we have:
M1 = 4.2
A1 = 1 (by definition)
A2 = 250
M2 = 4.2 + log(250/1)
M2 = 6.3
Therefore, the magnitude of an earthquake 25 times as strong as a 4.2 earthquake would be 6.3 on the Richter scale.

Learn more about times here: brainly.com/question/28050940

#SPJ11

Answer:

4°C

Step-by-step explanation:

-8 + 12 = 4°C

Hope this helps and be sure to mark this as brainliest! :)

Answer:

a=8c-b/2

Step-by-step explanation:

a/2c+b/4=2

find the lcm

lcm=4c

multiply through by lcm 4c

4c×a/2c+4c ×b/4=4c×2

2×a+b×c=8c

2a+bc=8c

subtract bc from both sides

2a+bc-bc=8c-bc

2a=8c-b

To make 'a' subject of formula, divide 2 from both sides

2a/2=8c-b/2

a=8c-b/2

Jamal would need approximately 7.9 gallons of gas to travel 296.25 miles.

We can use the concept of direct variation to solve this problem. Direct variation means that two quantities are related by a constant ratio. In this case, the number of miles driven is directly proportional to the number of gallons used.

To find the constant of proportionality, we can use the given data. From the table, we can see that when Jamal used 14 gallons, he drove 525 miles. So we can write:

14/525 = k

where k is the constant of proportionality.

Solving for k, we get:

k = 14/525

Now we can use this value of k to find how many gallons Jamal would need to travel 296.25 miles. Let x be the number of gallons he would need. Then we can write:

x/296.25 = k

Substituting the value of k, we get:

x/296.25 = 14/525

Solving for x, we get:

x = (296.25 × 14) / 525

x ≈ 7.9

To learn more about proportionality click on,

https://brainly.com/question/29005048

#SPJ1

The correct statements are a and b. Statement d is incorrect as the training data set is used to build the model, not to test its prediction accuracy.

The data should be partitioned into training and validation sets because we need two sets of data: one to build the model that depicts the relationship between the predictor variable(s) and the predicted variable, and another to validate the model's predictive accuracy. The training data set is used to build the model, and the validation data set is used to test the prediction accuracy of the model. In this process, the model (built using the training data set) is used to make predictions with the validation data - data that were not used to fit the model. In this way, we get an unbiased estimate of how well the model performs. Therefore, the correct statements are a and b. Statement d is incorrect as the training data set is used to build the model, not to test its prediction accuracy.
Your answer: a and b are the correct statements.

a. The training data set is used to build the model, and the validation data is used to test the prediction accuracy of the model.
b. In this process, the model (built using the training data set) is used to make predictions with the validation data - data that were not used to fit the model. In this way, we get an unbiased estimate of how well the model performs.
c. The data should be partitioned into training and validation sets because we need two sets of data: one to build the model that depicts the relationship between the predictor variables and the predicted variable, and another to validate the model's predictive accuracy.

Learn more about model here:

https://brainly.com/question/29810500

#SPJ1

The parameterization of the portion of the circular cylinder is :

x = 4 cos(t) cos(theta)
y = ±1/sin(theta)
z = 4 cos(t) sin(theta)
where t varies from 0 to pi/3 and theta varies from 0 to pi/6.

To find a parameterization of the portion of the circular cylinder y2 z2=16 between the planes x=2 and x=6, we can use cylindrical coordinates. Let r be the radius of the cylinder, and let theta be the angle of rotation around the z-axis. Then, we can parameterize the cylinder as:

x = r cos(theta)
y = y
z = r sin(theta)

Since we want the portion of the cylinder between x=2 and x=6, we can set x=r cos(theta) equal to these values:

2 = r cos(theta)
6 = r cos(theta)

Solving for r in each equation, we get:

r = 2/cos(theta)
r = 6/cos(theta)

Since the cylinder has radius sqrt(16) = 4, we know that r must be between 2 and 4. Therefore, we can set:

r = 4 cos(t)

where t is a parameter that varies from 0 to pi/3 (corresponding to theta varying from 0 to pi/6). Substituting this expression for r into the parameterization above, we get:

x = 4 cos(t) cos(theta)
y = y
z = 4 cos(t) sin(theta)

To find the range of y, we can look at the equation y2 z2=16 and substitute the expressions for y and z above:

y2 (4 cos(t) sin(theta))2 = 16
y2 sin2(theta) = 1
y = ±1/sin(theta)

Since theta varies from 0 to pi/6, sin(theta) varies from 0 to 1/2, so y varies from -2 to -∞ and from 2 to +∞. Therefore, we can write the parameterization as:

x = 4 cos(t) cos(theta)
y = ±1/sin(theta)
z = 4 cos(t) sin(theta)

where t varies from 0 to pi/3 and theta varies from 0 to pi/6.

To learn more about  cylinder visit : https://brainly.com/question/9554871

#SPJ11

The following parts can be answered by the concept of Standard deviation.

4. To test the scenario, we can set up the following hypotheses:

Null Hypothesis (H0): The proportion of positions where men are paid more than women is equal to 0.5 (equal pay).
Alternative Hypothesis (H1): The proportion of positions where men are paid more than women is greater than 0.5 (men are paid more).

5. To calculate the test statistic and p-value, we'll use a one-sample proportion test. In this case, the sample proportion (p-hat) is 19/21. The hypothesized proportion (p0) is 0.5. The sample size (n) is 21.

Test Statistic (z) = (p-hat - p0) / √((p0 × (1 - p0)) / n)
z = (19/21 - 0.5) / √((0.5 × (1 - 0.5)) / 21)
z ≈ 6.43

To find the p-value, we look at the upper tail of the standard normal distribution corresponding to the z-score of 6.43. Since this z-score is very large, the p-value is extremely small (approaching 0).

6. With such a small p-value (close to 0) and a significance level (α) of 0.05, we reject the null hypothesis in favor of the alternative hypothesis. This sample provides convincing evidence that men are paid more than women in the examined positions at the 0.05 significance level.

To learn more about Standard deviation here:

brainly.com/question/23907081#

#SPJ11

The following parts can be answered by the concept of Standard deviation.

4. To test the scenario, we can set up the following hypotheses:

Null Hypothesis (H0): The proportion of positions where men are paid more than women is equal to 0.5 (equal pay).
Alternative Hypothesis (H1): The proportion of positions where men are paid more than women is greater than 0.5 (men are paid more).

5. To calculate the test statistic and p-value, we'll use a one-sample proportion test. In this case, the sample proportion (p-hat) is 19/21. The hypothesized proportion (p0) is 0.5. The sample size (n) is 21.

Test Statistic (z) = (p-hat - p0) / √((p0 × (1 - p0)) / n)
z = (19/21 - 0.5) / √((0.5 × (1 - 0.5)) / 21)
z ≈ 6.43

To find the p-value, we look at the upper tail of the standard normal distribution corresponding to the z-score of 6.43. Since this z-score is very large, the p-value is extremely small (approaching 0).

6. With such a small p-value (close to 0) and a significance level (α) of 0.05, we reject the null hypothesis in favor of the alternative hypothesis. This sample provides convincing evidence that men are paid more than women in the examined positions at the 0.05 significance level.

To learn more about Standard deviation here:

brainly.com/question/23907081#

#SPJ11