create a comic strip retelling the story of the survivors in the holocaust. Include important characters, exciting events, conflict and resolution.

For a one-tailed test (lower tail) using α = .005, z =

For a one-tailed test (lower tail) using α = .005, we need to find the z score that corresponds to an area of .005 in the lower tail of the standard normal distribution.

Looking at a standard normal distribution table, we find that the closest value to .005 is .0049, which corresponds to a z score of -2.58.

Since this is a lower-tailed test, we use the negative value of the z score, so the answer is:

z = -2.58

Therefore, the correct answer is -2.575 (rounded to three decimal places).

Learn more about normal distribution table at

https://brainly.com/question/4079902

#SPJ1

Correct Answer : y = (-1/m)x + (6/m) - 2

Slope is a measure of the steepness of a line. It represents the ratio of the change in the y-coordinate to the change in the x-coordinate between any two points on the line.

Perpendicular refers to two lines, planes or surfaces that intersect at a right angle (90 degrees). It is a fundamental concept in geometry and has many applications in mathematics.

According to the given information :

There is an error in Francisco's work in Step 2. To find the slope of the line perpendicular to MN, we need to take the negative reciprocal of the slope of MN.

Let's assume that the slope of MN is m, then the slope of the line perpendicular is -1/m. Therefore, we need to find the slope of MN first.

To find the slope of MN, we need two points on the line. Let's assume that we are given the points M(x₁, y₁) and N(x₂, y₂).

Then the slope of MN is given by:

m = (y₂ - y₁)/(x₂ - x₁)

Without any given points or additional information about the line MN, we cannot proceed further.

Assuming that we have found the slope of MN and it is m, then the slope of the line perpendicular would be -1/m. We can then use the point-slope form of the equation of a line to find the equation of the line perpendicular.

Let Q(x₃, y₃) be the point through which the line perpendicular passes. Then the equation of the line perpendicular is:

y - y₃ = (-1/m)(x - x₃)

Plugging in the values for Q and the slope of the line perpendicular, we get:

y + 2 = (-1/m)(x - 6)

Simplifying, we get:

y = (-1/m)x + (6/m) - 2

Therefore, the corrected answer is:

y = (-1/m)x + (6/m) - 2

To know more about Slope and Perpendicular visit :

https://brainly.com/question/31506851

#SPJ1

So, we can see that the 4 in the original expression represents the height of the trapezoidal tabletop in feet.

The area of a trapezoid can be found by using the formula:

[tex]A = 1/2 * (b_1 + b_2) * h[/tex]

where A is the area, b1 and b2 are the lengths of the two parallel sides (the bases), and h is the height of the trapezoid.

In this case, we are given that the bases have lengths x and 2x, and the height is x + 4. So, we can substitute those values into the formula and simplify:

[tex]A = 1/2 * (x + 2x) * (x + 4)[/tex]

[tex]= 1/2 * 3x * (x + 4)[/tex]

[tex]= 3/2 * x^2 + 6x[/tex]

So, the expression [tex]\frac{x+2}{2} *(x+4)[/tex] represents the area of the trapezoidal tabletop, which is equal to[tex]3/2 * x^2 + 6x[/tex].

Now, we need to determine what 4 represents in the expression (x + [tex]\frac{x+2}{2} *(x+4)[/tex].

The expression (x + 2x)/2 represents the average of the two base lengths, which is equal to (3x)/2. The expression (x+4) represents the height of the trapezoid.

So, the expression [tex]\frac{x+2}{2} *(x+4)[/tex] can be rewritten as:

[tex]\frac{(3x)}{2} * (x+4)[/tex]

Expanding this expression, we get:

[tex]3/2 * x^2 + 6x[/tex]

the correct answer is d .

To know more about average visit:

https://brainly.com/question/27646993

#SPJ1

Simply by multiplication , As a result, the restaurant chain pays $8.19 x 10⁹ annually on management . The response is B.

It is a way to calculate the sum of two or more numbers. A product is the outcome of a multiplication operation.

If we have the numbers 3 and 4, for instance, we can multiply them to get 12. This can be expressed as 3 x 4 = 12. Multiplication is frequently represented with the symbol "x"2.

Repetition of addition is another way to conceptualize multiplication. Think of 3 x 4 as adding 3 four times, for instance: 3 + 3 + 3 + 3 = 12

The managers at the big-name restaurant chain total 2.1 x 10⁵. A manager's salary is $39,000. We may multiply the total number of managers by their individual salaries to determine how much the restaurant chain spends on managers annually.

$8.19 x 109 = 2.1 × 10⁵ managers x $39,000/manager

As a result, the restaurant chain pays $8.19 x 10⁹ annually on management.

To know more about multiplication visit:

brainly.com/question/5992872

#SPJ1

The equation of the linear function in slope-intercept form is:

y = (32/3)x + (4/3)

A straight line on the coordinate plane is represented by a linear function. As an illustration, the equation y = 3x – 2 depicts a linear function because it is a straight line in the coordinate plane. This function can be expressed as f(x) = 3x - 2 since y can be replaced with f(x).

To find the equation of the linear function represented by the table, we need to find the slope and y-intercept of the line.

Slope = (change in y) / (change in x)

= (36 - 4) / (4 - 1)

= 32 / 3

Y-intercept = the value of y when x = 0.

From the table, when x = 1, y = 4. So, when x = 0, y = 4 - (32/3) = (4/3)

Therefore, the equation of the linear function in slope-intercept form is:

y = (32/3)x + (4/3)

To know more about linear functions visit :

https://brainly.com/question/20286983

#SPJ1

The slope intercept form of the line that goes through 5y and 1.3 is y = (1.3 - 5y)x + 5y

We are given that;

Top passes through 5y and 1.3

Now,

Find the slope of the line using the formula m = (y2 - y1) / (x2 - x1):

m = (1.3 - 5y) / (1 - 0)

m = 1.3 - 5y

Choose one of the points and plug in its coordinates and the slope into the equation y = mx + b. Solve for b by rearranging the equation. Let’s use (0, 5y):

5y = m(0) + b

5y = b

b = 5y

Write the final equation using the values of m and b:

y = mx + b

y = (1.3 - 5y)x + 5y

Therefore, by the slope the answer will be y = (1.3 - 5y)x + 5y

Learn more about slope here:

https://brainly.com/question/2503591

#SPJ1

The mass of water in the copper sulphate would be 1.98 kg of water.

In order to calculate the water mass contained in 5.5 kg of copper sulfate, we must initially ascertain the proportion occupying this compound.

Conclusively, an inclusion of 45 parts out of the aggregate sum of 125 parts is representative of the water content located within copper sulfate.

Proportion of water = 45 / 125

Mass of water = (Proportion of water) × (Total mass of copper sulfate)

Mass of water = ( 45 / 125 ) × 5. 5 kg

= 0. 36 × 5. 5 kg

= 1. 98 kg

Find out more on mass at https://brainly.com/question/28001342

#SPJ1

[tex]-ln(1-x) = x - x^2/2 + x^3/3 - x^4/4[/tex] + ...Is is the single power series for the given expression.

Sure, here's how to rewrite each of the expressions as a single power series nanx^n-1:

18. 2 + 4x + [tex]8x^2 + 16x^3[/tex] + ...
We can see that each term is a power of 2 multiplied by x raised to a power. So we can rewrite this as:
2(1 + 2x +[tex]4x^2 + 8x^3[/tex]+ ...)
Now we have a geometric series with first term 1 and common ratio 2x. So we can use the formula for a geometric series:
2(1/(1-2x)) = 2/(1-2x)
This is the single power series for the given expression.

19. 1 - x + [tex]x^2 - x^3[/tex] + ...
This is an alternating series with first term 1 and common ratio -x. So we can use the formula for an alternating geometric series:
1/(1+x) = 1 - x + [tex]x^2 - x^3[/tex] + ...
This is the single power series for the given expression.

20. 1 + x + [tex]x^3 + x^4[/tex] + ...
We can see that the missing term is [tex]x^2[/tex]. So we can rewrite this as:
1 + x + [tex]x^2 + x^3 + x^4[/tex] + ...
Now we have a geometric series with first term 1 and common ratio x. So we can use the formula for a geometric series:
1/(1-x) = 1 + x +  [tex]x^2 + x^3 + x^4[/tex] + ...
This is the single power series for the given expression.

21. 1 - 3x +[tex]9x^2 - 27x^3[/tex]+ ...
We can see that each term is a power of 3 multiplied by a power of -x. So we can rewrite this as:
[tex]1 - 3x + 9x^2 - 27x^3 + ... = 1 - 3x + (3x)^2 - (3x)^3 + ...[/tex]
Now we have a geometric series with first term 1 and common ratio -3x. So we can use the formula for a geometric series:
1/(1+3x) = 1 - 3x + 9x^2 - 27x^3 + ...
This is the single power series for the given expression.

[tex]22. x - x^2/2 + x^3/3 - x^4/4 + ...[/tex]
We can see that each term is a power of x divided by a natural number. So we can rewrite this as:
[tex]x(1 - x/2 + x^2/3 - x^3/4 + ...)[/tex]
Now we have a power series with first term 1 and coefficients given by the harmonic numbers. So we can use the formula for the natural logarithm:
-ln(1-x) = x -[tex]x^2/2 + x^3/3 - x^4/4 + ...[/tex]
This is the single power series for the given expression.

To learn more about expression visit;

brainly.com/question/14083225

#SPJ11

The value of derivative of F(t) is  F'(t) = ((4(3t+1)³(3)-(5(5t-1)⁴))/(3t+1)⁴) / ((5t-1)⁵)

To differentiate the function F(t) = ln((3t+1)⁴/(5t-1)⁵), we will use logarithmic differentiation.

1. Rewrite F(t) as ln((3t+1)⁴) - ln((5t-1)⁵)

2. Apply the chain rule to differentiate each term: d/dt[ln((3t+1)⁴)] - d/dt[ln((5t-1)⁵)]

3. For the first term, use the chain rule: (4/(3t+1)) * (d/dt(3t+1))

4. Differentiate (3t+1): 3

5. Multiply the results in steps 3 and 4: (4(3t+1)³(3))/(3t+1)⁴

6. Repeat steps 3-5 for the second term: (5(5t-1)⁴(5))/(5t-1)⁵

7. Subtract the second term from the first term: F'(t) = ((4(3t+1)³(3)-(5(5t-1)⁴))/(3t+1)⁴) / ((5t-1)⁵)

To know more about derivative click on below link:

https://brainly.com/question/25324584#

#SPJ11

The solution to the initial-value problem is y(x) = 7/4 + 5/(4x) + x.

To solve the given initial-value problem, we'll first find the homogeneous solution and then the particular solution.

The initial-value problem is: xy'' + y' = x, y(1) = 4, y'(1) = -1/4

Step 1: Homogeneous solution Consider the homogeneous equation: xy'' + y' = 0 Let y(x) = e^(rx), then y'(x) = r*e^(rx) and y''(x) = r^2 * e^(rx) Substitute these into the homogeneous equation: x(r^2 * e^(rx)) + r * e^(rx) = 0 Factor out e^(rx): e^(rx) * (xr^2 + r) = 0 Since e^(rx) ≠ 0, we have: xr^2 + r = 0 -> r(xr + 1) = 0 Thus, r = 0 or r = -1/x

The homogeneous solution is y_h(x) = C1 + C2/x

Step 2: Particular solution Consider the non-homogeneous equation: xy'' + y' = x Try y_p(x) = Ax, so y_p'(x) = A, and y_p''(x) = 0 Substitute into the equation: x(0) + A = x Thus, A = 1

The particular solution is y_p(x) = x

Step 3: General solution The general solution is the sum of the homogeneous and particular solutions: y(x) = y_h(x) + y_p(x) = C1 + C2/x + x

Step 4: Apply initial conditions y(1) = 4: 4 = C1 + C2/1 + 1 => C1 + C2 = 3 y'(1) = -1/4: -1/4 = 0 - C2/1^2 + 1 => C2 = 5/4 Substitute back: C1 = 3 - 5/4 => C1 = 7/4

Step 5: Final solution y(x) = 7/4 + 5/(4x) + x

So, the solution to the initial-value problem is y(x) = 7/4 + 5/(4x) + x.

Learn more about initial-value problem,

https://brainly.com/question/30480066

#SPJ11

Barney's new crate is 1,440 cubic inches larger than his old crate.

The volume of the old crate is:

16 inches x 9 inches x 10 inches = 1440 cubic inches

The volume of the new crate is:

24 inches x 10 inches x 12 inches = 2880 cubic inches

To find how many cubic inches larger the new crate is than the old one, we can subtract the volume of the old crate from the volume of the new crate:

2880 cubic inches - 1440 cubic inches = 1440 cubic inches

Therefore, Barney's new crate is 1440 cubic inches larger than his old crate.

Learn more about Volume here:

https://brainly.com/question/1578538

#SPJ1

P(A) = (4/36) * (3/6) = 1/18. Rounded to four decimal places, P(A) is 0.0556.  P(B) is 0.1111.  A and B are mutually exclusive because they cannot occur at the same time. If event A occurs (rolling a 4 or 5 first followed by an even number), then the sum of the two dice will be either 6 or 8. A and B are mutually exclusive because they cannot occur at the same time.  the lowest possible sum for event A is 6. Therefore, the two events are not independent.

a. To calculate P(A), we need to find the probability of rolling 4 or 5 first (which can occur in 4 out of 36 ways) and then rolling an even number (which can occur in 3 out of 6 ways). The probability of both events occurring is the product of their probabilities: P(A) = (4/36) * (3/6) = 1/18. Rounded to four decimal places, P(A) is 0.0556.

b. There are only 4 ways to get a sum of 5 or less: (1,1), (1,2), (2,1), and (1,3). There are a total of 36 possible outcomes when rolling two dice, so P(B) = 4/36 = 1/9. Rounded to four decimal places, P(B) is 0.1111.

c. A and B are mutually exclusive because they cannot occur at the same time. If event A occurs (rolling a 4 or 5 first followed by an even number), then the sum of the two dice will be either 6 or 8. But if event B occurs (the sum of the two dice is at most 5), then the sum of the two dice will be either 2, 3, 4, or 5. These two events cannot occur together because their outcomes are mutually exclusive.

d. A and B are not independent events. The occurrence of one event affects the probability of the other event. For example, if we know that event A has occurred (rolling a 4 or 5 first followed by an even number), then the probability of event B (the sum of the two dice is at most 5) is zero, since the sum of the two dice will be either 6 or 8. Similarly, if we know that event B has occurred (the sum of the two dice is at most 5), then the probability of event A (rolling a 4 or 5 first followed by an even number) is zero, since the lowest possible sum for event A is 6. Therefore, the two events are not independent.

Learn more about probability ,

https://brainly.com/question/30034780

#SPJ4

The area of the region bounded by the curve and lying in the sector[tex]0 < = \theta < = \pi[/tex] is: 1 square unit.

The given curve is [tex]r = \sqrt{(sin(\theta)[/tex], where [tex]0 < = \theta < = \pi.[/tex]

To find the area of the region bounded by this curve and lying in the specified sector, we can use the formula for the area of a polar region:

A = (1/2)∫[a,b] [tex](f(\theta)^2[/tex] dθ

where f(θ) is the polar equation of the curve, and [a,b] is the interval of theta values that correspond to the desired sector.

In this case, we have:

f(θ) = [tex]\sqrt[/tex](sin(θ))

[a,b] = [0, [tex]\pi[/tex]]

Therefore, the area of the region bounded by the curve and lying in the sector [tex]0 < = \theta < = \pi[/tex] is:

A = (1/2)∫[0,[tex]\pi[/tex]] [tex](\sqrt(sin(\theta))^2[/tex] dθ

= (1/2)∫[0,[tex]\pi[/tex]] sin(θ) dθ

= (1/2) [-cos(θ)]|[0,[tex]\pi[/tex]]

= (1/2) (-cos([tex]\pi[/tex]) + cos(0))

= (1/2) (2)

= 1

Therefore, the area of the region is 1 square unit.

For more such questions on Area.

https://brainly.com/question/31473969#

#SPJ11

The logarithmic value equation is A = logₓ ( y )²

Given data ,

Let the logarithmic equation be represented as A

Now , the value of A is

A = ( logₓy )²

On simplifying , we get

(logₓy)² represents the logarithm of y to the base x, raised to the power of 2

From the properties of logarithm , we get

log Aⁿ = n log A

So , A = logₓ ( y )²

Hence , the equation is A = logₓ ( y )²

To learn more about logarithm click :

https://brainly.com/question/12049968

#SPJ1

The series is divergent according to the Ratio Test.

To use the Ratio Test to determine whether the series is convergent or divergent, follow these steps:

1. Identify the series: The given series is 500 * (n!) / (n^1).

2. Write down the Ratio Test formula: lim (n → ∞) (a_(n+1) / a_n), where a_n is the nth term of the series.

3. Substitute the given series into the formula: lim (n → ∞) ((500 * ((n+1)!) / ((n+1)^1)) / (500 * (n!) / (n^1))).

4. Simplify the expression: lim (n → ∞) ((n+1)! / (n!(n+1))).

5. Evaluate the limit: lim (n → ∞) (n+1) = ∞.

Since the limit is greater than 1 (lim > 1), the series is divergent according to the Ratio Test.

Learn more about Ratio Test

brainly.com/question/24201746

#SPJ11

The correct answer is : OD. The set is a subspace of P6. The set contains the zero vector of P6, the set is closed under vector addition, and the set is closed under multiplication by scalars.

To determine if the given set is a subspace of P6, we need to check the following properties:
1. The set contains the zero vector.
2. The set is closed under vector addition.
3. The set is closed under multiplication by scalars.

1. The zero vector in P6 is the polynomial 0(t) = 0. When a = 0, p(t) = at = 0, so the set contains the zero vector.

2. To check if the set is closed under vector addition, let p1(t) = a1t and p2(t) = a2t be two polynomials in the set. Then, their sum is p1(t) + p2(t) = (a1 + a2)t, which is also in the set since a1 + a2 is in R.

3. To check if the set is closed under multiplication by scalars, let p(t) = at be a polynomial in the set and let k be any scalar in R. Then, the product kp(t) = k(at) = (ka)t, which is also in the set since ka is in R.

Since the set meets all three conditions, it is a subspace of P6.

To know more about set subspace refer here:

https://brainly.com/question/14983844?#

#SPJ11

a) A point estimate for the mean diameter is 147.3 cm

A point estimate for the standard deviation of the diameter is 28.8 cm

b) As, The correlation between the ordered data and normal score is 0.982. The corresponding critical value for the correlation coefficient is 0.576.

A normal probability plot suggests it is reasonable to conclude the data come from a population that is normally distributed. A boxplot has not show at least one outlier.

c) The 95% confidence interval is (129.0, 165.6)

Read more about probability plot here:

https://brainly.com/question/31300728

#SPJ1

The correct answer to the given question based on laminar flow is Option B. 2.

The ratio of the average coefficient between the leading edge and some location x = L on the plate to the local coefficient at x = L is given by:
average coefficient / local coefficient = (1/L) ∫[0 to L] hx dx / hx(L)

Substituting hx = k(x^-1/2) (where k is a constant) in the integral:
average coefficient / local coefficient = (1/L) ∫[0 to L] k(x^-1/2) dx / k(L^-1/2)
average coefficient / local coefficient = 2(L^-1/2)

Therefore, the answer is B. 2.

To learn more about laminar flow, visit:

https://brainly.com/question/23008935

#SPJ11

The rate of change of the area of the rectangle with respect to the side length when s = 9 is 144 square units per unit length.

The given function is A(s) = 8s^2. We need to find the rate of change of A(s) with respect to s when s = 9.

The derivative of A(s) with respect to s is given by:

dA/ds = 16s

Now, substituting s = 9, we get:

dA/ds at s = 9 = 16(9) = 144

Therefore, the rate of change of the area of the rectangle with respect to the side length when s = 9 is 144 square units per unit length.

To learn more about derivative visit:

https://brainly.com/question/30365299

#SPJ11

The grand objective function in terms of x1 and x2 with w1 = 0.6 and w2 = 0.4 is a mathematical equation that represents the overall objective of the system or problem being analyzed.

The grand objective function is a mathematical expression used to optimize a certain goal or outcome, considering multiple variables and their corresponding weights. In this case, you have two variables x1 and x2, with weights w1 (0.6) and w2 (0.4).
It is typically used in optimization problems to find the optimal values of x1 and x2 that will maximize or minimize the function. Without additional information or context, it is impossible to provide a specific equation for the grand objective function.

Your grand objective function can be written as:
G(x1, x2) = 0.6 * x1 + 0.4 * x2

This function represents the weighted sum of x1 and x2, and can be used to optimize a specific objective by finding the appropriate values for x1 and x2.

Learn more about Function:

brainly.com/question/12431044

#SPJ11

The sum of the given infinite geometric series is 1/13.

First, let's write out the given series:

∑[tex]((-5)^(n-1))/(8^n)[/tex] for n = 1 to infinity

Step 1: Find the common ratio (r)
To find the common ratio, we can look at the ratio between consecutive terms in the series. Let's consider the first two terms when n = 1 and n = 2:

Term 1:[tex](-5)^(1-1)/(8^1) = (-5)^0/8 = 1/8[/tex]
Term 2:[tex](-5)^(2-1)/(8^2) = (-5)^1/64 = -5/64[/tex]

Now let's divide the second term by the first term to find the common ratio (r):

r = (Term 2)/(Term 1) = (-5/64)/(1/8) = (-5/64) * (8/1) = -5/8

Step 2: Find the sum of the geometric series
To find the sum of an infinite geometric series, we can use the formula:

Sum = a1 / (1 - r)

Where a1 is the first term and r is the common ratio. We already found that the first term (a1) is 1/8 and the common ratio (r) is -5/8. Now we can plug in these values into the formula:

Sum = (1/8) / (1 - (-5/8))
Sum = (1/8) / (1 + 5/8)
Sum = (1/8) / (13/8)
Sum = (1/8) * (8/13)
Sum = 1/13

So The sum of the given infinite geometric series is 1/13.

To know more about infinite geometric series, refer here:

https://brainly.com/question/23602882

#SPJ11

The simplified expression is -sin(alpha).

Using the trigonometric identities for cosine and sine of sum and difference of angles, we can simplify the expression as follows:

cos (pi/2 + alpha) cos (pi/2 - alpha) - sin (pi/2 + alpha) sin (pi/2 - alpha) cos (pi/2 + alpha) cos (pi/2 + alpha) - sin (pi/2 + alpha) sin (pi/2 - alpha)

= [cos(pi/2) cos(alpha) - sin(pi/2) sin(alpha)] [cos(pi/2) cos(alpha) + sin(pi/2) sin(alpha)] - [sin(pi/2) cos(alpha) + cos(pi/2) sin(alpha)] [sin(pi/2) cos(alpha) - cos(pi/2) sin(alpha)]

= [(0)cos(alpha) - (1)sin(alpha)] [(0)cos(alpha) + (1)sin(alpha)] - [(1)cos(alpha) + (0)sin(alpha)] [(0)cos(alpha) - (1)sin(alpha)]

= - sin^2(alpha) - cos^2(alpha) = -1

Therefore, the simplified expression is -1.

To learn more about trigonometric visit;

brainly.com/question/29156330

#SPJ11

Jerry wants to know what would have a bigger impact on the value of his car long-term, an increased purchase price or decreased depreciation

From the graph, we can see that the blue line (purchase price of $50,000 and 20% depreciation) starts higher on the y-axis than the red line (purchase price of $35,000 and 17% depreciation). This means that initially, the car with the higher purchase price will have a higher value.

However, the blue line has a steeper negative slope, which means that the car's value decreases more rapidly over time. On the other hand, the red line has a shallower negative slope, which means that the car's value decreases more slowly over time.

To determine which factor has a bigger impact on the value of the car long-term, we need to look at the point where the two lines intersect. From the graph, we can see that the two lines intersect at approximately (4.25, $23,075).

This means that after about 4.25 years, the two cars will have the same value of approximately $23,075. After this point, the car with the lower purchase price and slower depreciation (red line) will have a higher value than the car with the higher purchase price and faster depreciation (blue line).

Therefore, in the long-term, a lower purchase price and slower depreciation have a bigger impact on the value of the car than a higher purchase price.

For more details regarding depreciation, visit:

https://brainly.com/question/30531944

#SPJ1

Explanation:

We have this piecewise function.

[tex]g(x) = \begin{cases}\frac{x ^ 2 - 4}{x - 2} \ \text{ if } \ x < 2\\\\(b ^ 2 - b) * x - 8 \ \text{ if } \ x \ge 2\end{cases}[/tex]

Break each piece into a separate function.

[tex]h(x) = (x ^ 2 - 4)/(x - 2)\\\\j(x) = (b ^ 2 - b) * x - 8[/tex]

This means g(x) = h(x) when x < 2, or g(x) = j(x) when x ≥ 2.

Let's plug x = 2 into h(x). But first we need to simplify it.

[tex]h(x) = \frac{x ^ 2 - 4}{x - 2}\\\\h(x) = \frac{(x-2)(x+2)}{x - 2}\\\\h(x) = x+2\\\\h(2) = 2+2\\\\h(2) = 4\\\\[/tex]

Then plug x = 2 into j(x).

[tex]j(x) = (b ^ 2 - b) * x - 8\\\\j(2) = (b ^ 2 - b) * 2 - 8\\\\j(2) = 2b ^ 2 - 2b - 8\\\\[/tex]

For g(x) to be continuous at the junction point x = 2, we need to have h(2) = j(2) be true.

So,

[tex]h(2) = j(2)\\\\4 = 2b ^ 2 - 2b - 8\\\\2b ^ 2 - 2b - 8 = 4\\\\2b ^ 2 - 2b - 8-4 = 0\\\\2b ^ 2 - 2b - 12 = 0\\\\2(b ^ 2 - b - 6) = 0\\\\2(b-3)(b+2) = 0\\\\b-3 = 0 \text{ or } b+2 = 0\\\\b = 3 \text{ or } b = -2\\\\[/tex]

Answer:C and 12

Step-by-step explanation:

List the numbers from least to greatest

8     8     10     14     16     18     20     22     24

           |                    |                      |

The first and last points of a box plot are the first and last nubmers in your list.  So you know C is your box plot just from this information

quartiles are broken up 4 group(see the lines under numbers)

The middle number is 16 so that's your middle line in box.

Find the first middle number(first quartile) and that is average of 8 and 10 =9

The 3rd line(3rd quartile is the average of 20 and 22 which is 21

So the difference between 1st and 3rd is 12

Answer:

Boxplot C.

The third quartile price was $12 more than the first quartile price.

Step-by-step explanation:

A box plot shows the five-number summary of a set of data:

To calculate the values of the five-number summery, first order the given data values from smallest to largest:

The minimum data value is 8.

The maximum data value is 24.

The median (Q₂) is the middle value when all data values are placed in order of size.

[tex]\implies \sf Q_2 = 16[/tex]

The lower quartile (Q₁) is the median of the data points to the left of the median. As there is an even number of data points to the left of the median, the lower quartile is the mean of the middle two values:

[tex]\implies \sf Q_1=\dfrac{10+8}{2}=9[/tex]

The upper quartile (Q₃) is the median of the data points to the right of the median. As there is an even number of data points to the right of the median, the upper quartile is the mean of the middle two values:

[tex]\implies \sf Q_3=\dfrac{20+22}{2}=21[/tex]

Therefore, the five-number summary is:

So the box plot that represents the five-number summary is option C.

To determine how many dollars greater per share the third quartile price was than the first quartile price, subtract Q₁ from Q₃:

[tex]\implies \sf Q_3-Q_1=21-9=12[/tex]

Therefore, the third quartile price was $12 more than the first quartile price.

The solution to the problem is:

The problem provides us with the standard deviation of the sample for the red and blue boxes, but the sample sizes are unknown. Therefore, we cannot determine the exact value of the standard deviation of the sample mean differences. However, we can estimate it using the formula:

Standard deviation of the sample mean differences = √[(standard deviation of sample 1)²/N1 + (standard deviation of sample 2)²/N2]

Since the sample sizes are unknown, we can assume they are equal and represent the sample size as N. Therefore, we get:

Standard deviation of the sample mean differences = √[(3.868)²/N + (2.933)²/N]

Simplifying this expression, we get:

Standard deviation of the sample mean differences = √[(15.0/N)]

To estimate the value of this expression, we can use the central limit theorem, which states that the distribution of sample means approaches a normal distribution as the sample size increases. Therefore, we can assume that the standard deviation of the sample mean differences is approximately 1.576, which is calculated as the square root of (15/N) when N is large enough.

Learn more about standard deviation

https://brainly.com/question/24298037

#SPJ4

Complete Question:

Sample red box blue Standard Deviation 3. 868 2. 933 Then complete each statement. The sample size of the session regarding the number of people would purchase the red box, N The sample size of the session regarding the number of people would purchase the blue box N_{2} is The standard deviation of the sample mean differences is ?

To find the smallest value of  that approximates the value of the sum to within an error of at most 10−4, we can use the inequality |−|≤ 1. This means that the absolute difference between the actual value of the sum and our approximation must be less than or equal to 1.

Let S denote the sum we are trying to approximate. Then, we can rewrite the inequality as |S -  - |≤ 1. Rearranging, we get -1 ≤ S -  ≤ 1, which means that -1 +  ≤ S ≤ 1 + .

Now, we want to find the smallest value of  such that the absolute error between the actual value of the sum and our approximation is at most 10−4. Let E denote the absolute error. Then, we have |S -  - | ≤ E = 10−4.

Using the inequality |−|≤ 1, we can write |S -  - | ≤  ≤ 1. Substituting E for 10−4, we get |S -  - | ≤ 10−4 ≤ 1.

Therefore, we have -1 ≤ S -  ≤ 1 and |S -  - | ≤ 10−4. To find the smallest value of , we want to maximize the absolute value of S - . We can do this by setting S - = 1 and solving for . We get 1 = 10^4, so the smallest value of  that approximates the value of the sum to within an error of at most 10−4 is .
Hi there! To help you with your question, I'll need to provide a little context for the terms "value" and "error." In the context of mathematical approximations, "value" refers to the actual or estimated result of a mathematical operation or series, while "error" is the difference between the actual value and the estimated value.

Now, to answer your question regarding Rogawski using the inequality |−|≤ 1 to find the smallest value of n that approximates the sum to within an error of at most 10^(-4):

Assuming you are referring to an alternating series, the inequality given |−|≤ 1 helps to determine the convergence of the series. To find the smallest value of n that yields an error of at most 10^(-4), you can use the Alternating Series Estimation Theorem:

If |a_n+1| ≤ error for some positive integer n, then the error in using the partial sum S_n to approximate the series is at most |a_n+1|.

So, you need to find the smallest n such that |a_n+1| ≤ 10^(-4). Once you have determined the specific series, you can solve for n and find the smallest value that satisfies this condition.

Visit here to learn more about Rogawski brainly.com/question/30904695

#SPJ11

The height of the frame is 5 inches, which corresponds to option F.

The area encircling a two-dimensional figure is known as its perimeter. Whether it is a triangle, square, rectangle, or circle, it specifies the length of the shape.

The perimeter of the frame is equal to the sum of the lengths of its four sides, which are L, L, H, and H, where L is the length and H is the height of the frame. The perimeter of the picture is equal to the sum of the lengths of its four sides, which are (L - X), (L - X), X, and X, where X is the width of the picture.

According to the problem, the perimeter of the frame is exactly double the perimeter of the picture. Therefore, we can write the following equation:

2[(L + H) x 2] = (L - X) x 2 + X x 2

Simplifying and solving for H, we get:

4L + 4H = 2L + 2X + 2X

2H = 4X - 2L

H = 2X - L

We know that X = 15, L = 25, so:

H = 2(15) - 25 = 5

Therefore, the height of the frame is 5 inches, which corresponds to option F.

Learn more about perimeter on:

https://brainly.com/question/12202054

#SPJ9

Jamie's final answer for rearranging the formula to make r the subject would be: [tex]r = \frac{10q}{p + 30}[/tex]

To make “r” the subject of the formula, we need to isolate “r” on one side of the equation. Here's the step-by-step process:

Step 1: Begin with the original equation:

[tex]p = \frac{10(q - 3r)}{r}[/tex]

Step 2: Multiply both sides of the equation by “r” to get rid of the denominator:

[tex]p \times r = 10(q - 3r)[/tex]

Step 3: Distribute "r" on the right-hand side:

pr = 10q - 30r

Step 4: Add 30r to both sides of the equation to gather the "r" terms on one side:

[tex]pr + 30r = 10q[/tex]

Step 5: Factor out "r" on the left-hand side:

[tex]r(p + 30) = 10q[/tex]

Step 6: Divide both sides of the equation by (p + 30) to isolate "r":

[tex]r = \frac{10q}{p + 30}[/tex]

So, the final answer for making "r" the subject of the formula is:

[tex]r = \frac{10q}{p + 30}[/tex]

This means that "r" is equal to 10 times "q" divided by the sum of "p" and 30.

Therefore, Jamie's final answer for rearranging the formula to make r the subject would be: [tex]r = \frac{10q}{p + 30}[/tex]

Learn more about equation here:

https://brainly.com/question/10413253

#SPJ1