Answer:
a0.0075 mi i think so ok but average is need to add and divide
QUICK HELP!?Where do you think all the rain that falls goes ? Be detailed and specific
Answer:
Back into the sky and sewers/drainage holes
Explanation:
Water becomes evaporated from the sun and Rain also goes into drainage holes
Into the Earth of course! Rain falls from the sky then onto the ground in the dirt making grass or flowers, or perhaps crops. Rain kan also go onto the tress in the rainforest, or maybe the beautiful Niagara Falls.
(hope this helps!)
Which of the following represents an endothermic reaction?
Question 12 options:
A + B --> C + D + Heat
heat pack getting hot
Heat + A + B --> C + D
burning wood
Answer:
ANSWERThe second one would be one of the application of an endothermic reaction as because endothermic reaction always have the heat in the process to mix the reactants and form the products as here in a burning wood when the wood is supplied with heat then it change into products as ashes and smoke fumes So here due to the heat is involved to form the products thats the reaction is endothermic reaction.
Hope it helps
The half-lives of both zero-order and second-order reactions depend on both initial concentrations and rate constants. Why does the half-life for second order decrease with increasing initial concentration
Answer:
This is because the half life of second order reactions is inversely proportional to the initial concentration of the reactant.
Explanation:
The equation to half life in the second order reactions is given by:
t1/2=1/[A]initial
From the equation, you can see that as the initial concentration of A increases the denominator also increases ,thus overall value (t1/2) decreases.
Hope this helps:)
What is the percent by volume of 12.5 mL of ethanol in 250 mL of water?
3%
5%
4%
6%
What is the new concentration of a solution of CaSO3 if 10.0 mL of a 2.0 M CaSO3 solution is diluted to 100 ml?
Answer: The new concentration of a solution of [tex]CaSO_{3}[/tex] is 0.2 M 10.0 mL of a 2.0 M [tex]CaSO_{3}[/tex] solution is diluted to 100 mL.
Explanation:
Given: [tex]V_{1}[/tex] = 10.0 mL, [tex]M_{1}[/tex] = 2.0 M
[tex]V_{2}[/tex] = 100 mL, [tex]M_{2}[/tex] = ?
Formula used to calculate the new concentration is as follows.
[tex]M_{1}V_{1} = M_{2}V_{2}[/tex]
Substitute the values into above formula as follows.
[tex]M_{1}V_{1} = M_{2}V_{2}\\10.0 mL \times 2.0 M = M_{2} \times 100 mL\\M_{2} = 0.2 M[/tex]
Thus, we can conclude that the new concentration of a solution of [tex]CaSO_{3}[/tex] is 0.2 M 10.0 mL of a 2.0 M [tex]CaSO_{3}[/tex] solution is diluted to 100 mL.
16. The passage of salts into and out of cells is most
closely associated with the life process of
A. transport
B. respiration
C. reproduction
D. digestion
Answer:
A. transport
Explanation:
yan po sana makatulong
Balancing equations helps please !!
Explanation:
3. 2AlBr3 + 3k2SO4----------> 6KBr + Al2(SO4)3
stay safe healthy and happy.Qué volumen (en metros cúbicos) deberá tener un gas que se encuentra a 3.3 atm en un recipiente cilíndrico de radio de 2.8 m y altura 4.6 m para que la presión final sea de 1.9 atm.
Answer:
Volumen = 65.199 metro cúbico
Explanation:
Tal como lo conocemos
P1V1 = P2 V2
Aquí
P1 = 1,9 atmósferas
V1 = (pi) * r ^ 2 * h
Sustituyendo los valores dados, obtenemos
V1 = 3.14 * 2.8 * 2.8 * 4.6 = 113.241 metros cúbicos
V2 = por determinar
P2 = 3.3 atmósferas
Sustituyendo los valores dados y derivados en la fórmula principal, obtenemos -
1.9 atm * 113.241 metros cúbicos = 3.3 atm * V2
V2 = 1.9 atm * 113.241 metros cúbicos / 3.3 atm
V2 = 65.199 metro cúbico
Identify each statement below as an example of science or pseudoscience. Magnets can cure arthritis.
Answer:
pseudoscience
Explanation:
A pseudoscience may be defined as certain beliefs and statements or practices that are mistakenly regarded as a practice that is based on scientific method. These practices are claimed and thought to be factual as well as scientific, but they are incompatible with any scientific method.
One such pseudoscience is the belief that magnets can cure arthritis. It is a common belief that magnet therapy cab ease and provide a relief from the arthritis pain but scientific studies have confirmed that such treatments are ineffective for the arthritis pains and problems.
the tissue which continually forms new cells in plants
Answer:
Meristematic Tissues. Tissues where cells are constantly dividing are called meristems or meristematic tissues. These regions produce new cells.
Explanation:
thank me later
To determine the molar mass of an element, one must know the element's
a. number of isotopes.
b average atomic mass
c avogradro constant
d atomic number
Answer:
d
Explanation:
from you know the atomic number it should be easy to find
To determine the molar mass of an element, one must know the element's atomic number. Therefore, option D is correct.
What is the atomic number ?An element's atomic number (Z) is the number of protons in the nucleus of each atom of that element. This means that the number of protons is the feature that distinguishes each element from all others. Elements differ based on their atomic number.
Because the combined masses of protons and neutrons account for nearly all the mass of a given atom, the atomic mass of a single atom can be calculated by adding the total number of protons and neutrons of that particular isotope.
The atomic mass of any element on the periodic table can be used to calculate its molar mass.
Thus, option D is correct.
To learn more about an atomic number, follow the link;
https://brainly.com/question/16858932
#SPJ6
What is a limiting factor?
A limiting factor determines where an organism can live.
O A limiting factor helps an organism outcompete other organisms.
O A limiting factor helps an organism survive in a habitat.
What is the molar mass of H3PO4?
(Molar mass of H = 1.0079 g/mol; P = 30.974 g/mol; O = 15.999 g/mol)
72.98 g/mol
O 78.22 g/mol
88.24 g/mol
97.99 g/mol
Answer:
Molar mass of H3PO4 = 97.99 g/mol (Approx.)
Explanation:
Find:
Molar mass of H3PO4
Given;
Molar mass of H = 1.0079 g/mol
Molar mass of P = 30.974 g/mol
Molar mass of O = 15.999 g/mol
Computation:
Molar mass of H3PO4 = (1.0079)(3) + 30.974 + 15.999(4)
Molar mass of H3PO4 = 3.0237 + 30.974 + 63.996
Molar mass of H3PO4 = 97.9937
Molar mass of H3PO4 = 97.99 g/mol (Approx.)
Answer:
The above answer is correct
Explanation:
I took the test
Describe you would obtain a sample of lead via electrolysis
Answer: Electrolysis is defined as the process by which electrolyte allows electric current to pass through it and is decomposed in the process.
Explanation:
Substances that allow the passage of electric current are known as conductors. Examples of conductors are metals, graphites. Metals are good conductors of electricity of which an example is LEAD.
Lead is a metal which can be extracted through the process of electrolysis. A substance in solution or liquid state like lead (II) bromide which allows electric current to pass through it and at the same time decompose by it is known as an ELECTROLYTE.
In the electrolysis of lead (II) bromide to obtain Lead,the electrolyte ionize into positive and negative ions. The positive ions migrate to the cathode and are known as captions. The negative ions migrate to the anode and are known as anions.
--> At the CATHODE: Pb2+ gains electrons and Lead is deposited
Pb2+(aq) + 2e -----> Pb(s)
--> At the anode: Br- gives up electrons and is liberated as bromine vapour.
2Br- (aq) ------> Br2(g) + 2e.
PLEASE QUICKLY. I'll give BRAINLIEST. A sample contains 25% parent isotope and 75% daughter isotopes. If the half-life of the parent isotope is 72 years, how old is the sample?
144 years old
216 years old
288 years old
360 years old
From the calculations and the principles of radioactivity, the age of the parent isotope is 144 years
What is radioactivity?The term radioactivity has to do with the spontaneous decay of a substance.
We know that we have about 25% parent isotope still remaining hence;
[tex]0.693/t1/2 =2.303/t log No/N\\When N =0.25 No and t1/2 = 72 years\\0.693/72 =2.303/t log No/0.25No\\0.0096 = 2.303/t *0.60206\\0.0096 = 1.3865/t\\t = 1.3865/0.0096\\t =144 years[/tex]
Learn more about radioisotope:https://brainly.com/question/13076859
#SPJ2
Answer:
A. 144 years old
Explanation:
Which of the following has the greatest effect on colligative properties?
A. Calcium chloride (CaCl2)
B. Aluminum Nitrate (Al(NO3)3)
C. Epsom salt (MgSO4)
D. Sodium chloride (NaCl)
A good year blimp (a huge airship) is filled to a
volume of 1,800L at a temperature of 35°C. As
the weather changed the blimp is then cooled
at constant pressure to a temperature of -46°C.
What is the final volume of the blimp?
Answer:
V₂ = 1326.62 L
Explanation:
Given that,
Initial volume, V₁ = 1800 L
Initial temperature, T₁ = 35°C = 308 K
Final temperature, T₂ = -46°C = 227 K
We need to find the final volume of the blimp. The relation between volume and temperature is given by :
[tex]\dfrac{V_1}{V_2}=\dfrac{T_1}{T_2}\\\\V_2=\dfrac{V_1T_2}{T_1}\\\\V_2=\dfrac{1800\times 227}{308}\\\\V_2=1326.62\ L[/tex]
So, the final volume of the blimp is 1326.62 L.
A scientist plans the react 9.0x10^-2 L NO held at a pressure of 200.0kPa and a temperature of 20.0 C with excess hydrogen. How many moles of nitrogen gas will be produced
Answer:
[tex]n_{N_2}=0.00369molN_2[/tex]
Explanation:
Hello there!
In this case, by firstly setting up the described chemical reaction, we are able to write:
[tex]2NO(g)+2H_2(g)\rightarrow N_2(g)+2H_2O(g)[/tex]
Thus, given the pressure (convert to atm), volume and temperature (convert to K) we can calculate the moles of NO:
[tex]n=\frac{PV}{RT}\\\\n=\frac{200.00/101.325atm*0.090L}{0.08206\frac{atm*L}{mol*K}*(20.0+273.15)K} \\\\n=0.00738molNO[/tex]
Next, we use the 2:1 mole ratio of NO to N2 to obtain the moles of nitrogen gas that will be produced:
[tex]n_{N_2}=0.00738molNO *\frac{1molN_2}{2molNO} \\\\n_{N_2}=0.00369molN_2[/tex]
Regards!
what type of heat transfer when you get warm standing infront a fireplace,explain your reasoning
Answer:
Radiation refers to the emission of energy in rays or waves. Heat moves through space as energy waves. It is the type of heat one feels when sitting in front of a fireplace.
Explanation:
A sample of unknown gas in a closed container has a temperature of 37oC and a pressure of 2 atm. What will be the pressure if the sample is heated to 127oC?
note: Put your answer up to 1 decimal and the unit, in the blank
Answer:
hdfcghbjhaiedg
Explanation:
How does the overall charge of oxygen of -16 compare to the overall charge of oxygen -17 and oxygen -18?
Answer:
-2
The charge on an oxygen ion is -2. An oxygen atoms contain six electrons in its valence electron shell.
Explanation:
The ratio of the mass of U-238 to the mass of Pb-206 can be used to
1.
diagnose thyroid disorders
2.
diagnose kidney function
3.
date geological formations
4.
date once-living things
Answer:3)date geological formations
Explanation:
The ratio of the mass of U-238 to the mass of Pb-206 can be used to date geological formations.
Use of radioactive elementsRadioactive elements have unstable nucleus and they can be used for dating.
Examples of radioactive elementsUranium 238Lead 206The ratio of the amounts of U 238 and Pb 206 in a rock sample enables the age of the rock to be estimated using the technique of radiometric dating.
Thus, the ratio of the mass of U-238 to the mass of Pb-206 can be used to date geological formations.
Learn more about radiometric dating here: https://brainly.com/question/8831242
#SPJ2
Thermal energy is a measure of the __________ of particles of matter. *
(subject is science I just cant change it right now)
2. How many atoms of each element does a mole of Aspartame contain?
Answer:
The molecular formula for aspartame is C14H18N2O5, and its molar mass is about 294 g/mol. 1.2 g / 294 g/mol = 4.08 X 10-3 moles aspartame. Since each mole of aspartame has 2 moles of nitrogen, you have 8.16 X 10-3 moles of N in your 1.2 grams of aspartame.
Explanation:
Akosua has observed that anytime she drinks sobolo, her stool appears dark green. On one occasion
Akosua observed that her stool, which appeared dark green, turned quickly to bright red upon mixing with the perchloric acid-treated WC water.
i. What about the sobolo drink (bright red) that made the stool of Akosua green?
ii. Why did the stool of Akosua, which appeared green because she took sobolo drink, turn into
bright red upon mixing with the acidic WC water?
iii. Suggest a practical use of sobolo drink in the identification of chemicals in the science laboratory .
Answer:
i. Sobolo is a Ghanian drink that is produced from red hibiscus flower that has an average pH of 6.7
It contains cyanidin and anthocyanins, which is a red pigment that is red in an acidic medium and changes green when introduced in a basic medium that has a high pH
The pH at the rectum of the digestive system = 5 to 8 (Slightly basic)
Therefore, what made the stool of Akosua green is that the sobolo drink changes to green in basic solution
ii. The stool which appeared green because she took sobolo turn into bright red upon mixing with the acidic WC water because of the presence of anthocyanins in sobolo, it turns red in an acidic medium
iii. Sobolo which turns green, or blue in a basic medium and red in an acidic medium can be used as a litmus solution to test the pH of a given substance
Explanation:
Sobolo or soobolo in Ghana is a name for the Hibiscus tea or tisane, which is made from calyces of the hibiscus plant, and has a sour (tangy) taste and appears bright red in color
If anyone could answer this that would be great! Will mark brainliest!
Answer: I think it's 1 ATM and 0 F
Explanation:
How many grams of NaCl are in 1.25 X 1024
molecules of Naci? Use one decimal place
Answer:
121.1g
Explanation:
First, we need to convert the number of molecules of NaCl to moles (n) by dividing by Avagadro number
That is, n = number of molecules ÷ 6.02 × 10²³
n = 1.25 X 10²⁴ ÷ 6.02 × 10²³
n = 1.25/6.02 × 10^ (24-23)
n = 0.207 × 10¹
n = 2.07moles
Using the formula; mole = mass ÷ molar mass
Molar mass of NaCl = 23 + 35.5 = 58.5g/mol
mass = molar mass × mole
mass = 58.5 × 2.07
mass = 121.1g
container has 3 moles of gas with a volume of 60 liters and at a temperature of 250 K, Calculate the pressure inside the container in kPa
Answer:
103.9 KPa
Explanation:
From the ideal gas equation;
PV=nRT
From the parameters given;
P= ?
T=250 K
V= 60L
n=3
R=0.082 atmLK-1mol-1
P= nRT/V
P= 3 × 0.082 × 250/60
P= 1.025 atm
1 atm=101325 pascals
1.025 atm = 1.025 atm × 101325 pascals/1atm
= 103.9 KPa
Answer:
103.9kPa
Explanation:
To solve this question we must use the equation:
PV = nRT
P = nRT / V
Where P is pressure in atm
n are moles of the gas = 3mol
R is gas constant = 0.082atmL/molK
T is absolute temperature = 250K
V = 60L
P = 3mol*0.082atmL/molK*250K / 60L
P = 1.025atm
As 1atm = 101.325kPa
1.025atm * (101.325kPa / 1atm) = 103.9kPa
EMERGENCY HELP ME OUT
Answer:
D, The volume will be multiplied by a factor of 4
Explanation:
First find the height
V = π(r^2)h
Plug in what we know
83 = π(3^2)h
83 = π(9)h
83 = (9π)h
9[tex]\pi[/tex] = 28.27
83/28.27 = (28.27)h/28.27
h = 2.94
Then find the volume of the new can by doubling the radius
3 x 2 = 6
r = 6
V = π(r^2)h
V = π(6^2)2.94
V = π(105.84)
V =332.51
For the first one, they rounded to the nearest whole #, so let's do the same.
V = 333
Then divide 333 by 83 to get 4
Therefore, the volume will be multiplied by a factor of 4
What is the formula for percent by mass in chem
Answer:
mass percent = (mass of solute / mass of solution) x 100%
Explanation: