Answer:
whatttttttttttt
Explanation:
the ಠᴥಠಠᴥಠಠᴥಠಠᴥಠಠᴥಠಠᴥಠಠᴥಠಠᴥಠ
You have a new goal of saving at least $4,500 over the course of the next year.
You already have $900 saved.
By how much would you need to increase your monthly net savings in order to meet this goal?
Answer:
You would need to save $300 every month to meet your savings goal.
Explanation:
4,500-900=3,600
3,600/12=300
Answer:
answer is 200
Explanation:
edge 2021
What is 1/3 a millisecond in seconds (decimal form)? (0._ s)
Answer:
I don't know
Explanation:
plz
plz mark me as brainlist
when air gets hot, it rises and forms…
Answer:
Gas
Explanation:
Hot air rises because gases expand as they heat up. When air heats up and expands, its density also decreases.
four particles connected by rigid rods of negligible mass where y1 = 5.70 m. the origin is at the center of the rectangle. The system rotates in the xy plane about the z axis with and angular speed of 5.60 rad/s. a) calculate the moment of inertia of the system about the z axis. b) Calculate the rotational kinetic energy
The definition of moment of inertia and kinetic energy we can find the results for the questions are:
a) The moment of inertia is: I = 32.49 kg m²
b) The kinetic energy is: K = 509.4 J
a) The moment of inertia is a scalar quantity that has the same function as mass, it is given by
I = m r²
They indicate that the length of the bar is y₁ = 5.70 m, if the two rigid bars form the square that supports the masses, the distance from the center to the end where each mass is:
r = y₁ / 2
r = 5.70 / 2 = 2.85 m
The moment of inertia of the system is.
I = 4 m r²
Let's calculate.
I =4 m 2.85²
I = 32.49m kg m²
If we assume that the mass of each point particle is:
m = 1 kg
I = 32.49 kg m²
b) They ask for the rotational kinetic energy, if the angular velocity is.
w = 5.60 rad / s
The kinetic energy for rotational motion is.
K = ½ I w²
Let's calculate.
K = ½ 32.49 5.60²
K = 509.4 J
In conclusion with the definition of moment of inertia and kinetic energy we can find the results for the questions are:
a) The moment of inertia is: I = 32.49 kg m²
b) The kinetic energy is: K = 509.4 J
Learn more here: brainly.com/question/14838079
Tell me any 5 importance of medicinal plants
Answer:
Aloe, Tulsi, Neem, Turmeric, and Ginger are medicinal plants that can help with a variety of diseases. Ginger, green tea, walnuts, aloe, pepper, and turmeric are just a few of these plants. Some plants and their derivatives are key sources of active compounds used in aspirin and toothpaste, among other things.
Explanation:
Plant name: Uses:
1. Marshmallow: //// Relief from aching muscles and pain in muscle, Heals insect bite. ////
2.California poppy //// Relieves tension, Removes nervous system
3. Tulsi //// Cures sore throat, Cures fever and asthma
4. Neem //// Cures skin diseases, Cures diabetics
5. Aloevera //// Heals burns, Relieves constipation
(Hope this helps can I pls have brainlist (crown)☺️)
Given below are the names of some objects and materials: Water, basket ball, orange, sugar, globe, apple and earthen pitcher Group them as Eatables and Non eatables.
hope it helps
David drives and slows to a stop when he sees a stop sign. A graph of his velocity over time is shown below.
Velocity
20-
P6
15+
As:
10+
MY
5+
Time (s)
Col
t
5
10
15
20
MY
Pro
What is his average acceleration from 10 to 20 seconds?
Pro
Answer:
-2.0
Explanation:
A box is 30 cm wide, 40 cm long and 25 cm high. Calculate the volume of the box in cubic centimeter.
A) 3,000
B) 30,000
C) 15,000
D) 1,200
Answer:
The correct answer would be A: 3,000.
Explanation:
To find the volume of a box, you have to do l * w * h. You multiply 30, 40, and 25 which gives you an answer of 3,000 cubic centimeters.
Pls help thx need asap!!
Answer:
10N right
Explanation:
First, we need to find the base of the triangle to find the force acting on the right of the object.
We have been given the hypotenuse and we need to find the adjacent, so we are using cosSOH, CAH, TOAcos(θ) = adjacent ÷ hypotenuseNext, sub in the values (we don't know the adjacent so i've called it x):
cos(60) = x ÷ 60To find x, we need to multiply both sides by 60
60 × cos(60) = xx = 30 NNow we know all the forces, we can work out the net force:
Both of the 40N cancel out because they are opposite forcesThe force on the right of the object is 10N stronger than the force on the left (30N - 20N), so the object would move to the righta matter can be separated into which of the following choices
A matter can be separated into three states.
SolidLiquidGasIn solid state the bonding between atoms is maximum.In liquid state the bonding between atoms is less than solid.In gaseous state the bonding between atoms is minimumYou start your bicycle ride at the top of a hill moving East. You coast down the hill at a
constant acceleration of 2 m/s^2. When you get to the bottom of the hill you are moving at
18 m/s, and from there you pedal to maintain that velocity for one minute.
Answer:
198 meters
Explanation:
I'm not sure but hope it helps
how long untill the semester is done
The Canadian bobsled team hit the brakes on the sled they are traveling East in so that it decelerates at a rate of 0.43
m/s^2.
a) How long does it take to stop if it travels 85 m before coming to rest?
b) Draw the velocity vector.
c) Draw the acceleration vector.
Answer:
Explanation:
85 = ½(0.43)t²
t = √(2(85)/0.43)
t = 19.883380...
t = 20 s
v→ 8.55 m/s initial, 0 m/s final
a← 0.43 m/s²
the hanging
mass would need to be
Answer:
what do you need help with I can try to help you
Which of the following statement describes a nonpolar molecule
Answer:
?
Explanation:
what are the statements
the electrical energy used to pump the water up to a mountain lake is 1.2 x 10 to the power 12 J only 6.2 x 10 to the power 11 J of electrical energy is generated when the water is released calculate the efficiency of this energy storage scheme
Answer:
Explanation:
ake is 1.2 x 10^12 J. Only 6.2 x 10^11 J of electrical energy is generated when the water is released. Calculate the efficiency of this energy
what is the minimum mass in Mol. of plutonium 234 needed to reach a critical mass nuclear reaction?
Answer:
vddvdvvdvffdfvd
Explanation:
I need HELP! IMMEDIATELY!!!
Answer:
Option A
Explanation:
N is Chloroplast, P is a large centralized vacuole and R is the cell wall which are found only in plant cells. Hence, the given cell is a plant cell.
S = Rough Endoplasmic Reticulum
P = Vacuole
O = Nucleus
T = Smooth Endoplasmic Reticulum
U = Golgi Apparatus
N = Chloroplast
U = Cell Membrane
M = Mitochondria
R = Cell wall
[tex]\rule[225]{225}{2}[/tex]
Hope this helped!
~AH1807An 80 kg box is accelerated to the right at a rate of 3 m/s2. What is the applied force?
As we know,
F= ma
Here,
applied force(f)= mass × acceleration
=80kg×3m/s2
=240kgm/s2
=240N
If the law allows abortion based on sex, should we also allow abortion based on race, ethnicity, or skin color? Briefly explain why you believe this is right or wrong.
Answer:
No because you don't have to be black or white you don't have to be a pacific race to just get it like lets say for example a asian person come in and they want to get a abortion but the doctor say no then that person can end up killing her self or when the baby is born she could end you know doing something bad. But no you do not have to be a pacific person to just get it
Explanation:
A 220g mass is on a frictionless horizontal surface at the end of a spring that has a force constant of 7.0N/m The mass is displaced 5 2m from its equilibrium position and then released to undergo simple harmonic motion.
At what displacement from the equilibrium position is the potential energy equal to kinetic energy?
Answer:
Explanation:
Your numbers seem wonky, so I'll just assume that the initial displacement is a distance A (Amplitude) from the equilibrium position. Spring constant = k
Initial potential energy is
PE = ½kA²
As potential energy and kinetic energy are constantly exchanging in SHM,
the position x where half of the original spring potential exists is found where
½kx² = ½(½kA²)
x² = ½A²
x = (√0.5)A
x ≈ 0.707A
just plug in your actual starting position A
With A = 5.2 cm
x = 3.67695... 3.7 cm
Heat rash is caused by chemical exposure Truth or false
Answer:
This is false.
Explanation:
Heat rash develops when some of your sweat ducts clog. Instead of evaporating, perspiration gets trapped beneath the skin, causing inflammation and rash. Heat rash is usually self-limited, meaning it resolves on its own without treatment. Over-the-counter treatments such as calamine, hydrocortisone cream, itch preparations (such as Benadryl spray), or sunburn lotions can be used as skincare to treat the itching and burning symptoms. Heat rash usually goes away on its own within three or four days so long as you don't irritate the site further. Heat rash happens when the sweat glands get blocked. The trapped sweat irritates the skin and leads to small bumps.
Answer:
FALSE
Explanation:
Heat rash develops when blocked pores or sweat ducts trap perspiration under your skin. Symptoms range from superficial blisters to deep, red lumps. Some forms of heat rash feel tingly or intensely itchy.
dsfhfdskjhfdkshjkfdhskjdfhkjshjkfhsdkjf
Answer:
Abcdfeghijklmnopqrstuvwxyz
Explanation:
They are in order
Two vectors P=40m/s and q=60mls are perpendicular to each other. Calculate the resultant force and the angle resultant make with either vectors
This question involves the concepts of the rectangular components of the vector and the resultant of the vectors.
The magnitude of the resultant force is "72.11 N", and it makes an angle of "33.7°" from one of the vectors.
The rectangular components of a vector are those components that have a right angle between them. The resultant of two rectangular components of a vector can be found using the following formula:
[tex]F = \sqrt{F_1^2+F_2^2}[/tex]
where,
F = resultant force = ?
F₁ = First component of force = 40 N
F₂ = Second component of force = 60 N
Correction: The unit in question is given as m/s, while the unit of force is N. Hence, N is taken here.
Therefore,
[tex]F = \sqrt{(40\ N)^2+(60\ N)^2}[/tex]
F = 72.11 N
The following formula can be used to find the angle of resultant from 60N vector:
[tex]\theta = tan^{-1}(\frac{40\ N}{60\ N})\\\\[/tex]
θ = 33.7°
Learn more about rectangular components of a vector here:
https://brainly.com/question/14793638?referrer=searchResults
The attached picture shows the resultant calculation for the rectangular components of a vector.
what is deviation of light by prism
Answer:
When a ray of light passes from one medium to another it changes its path, this phenomenon of light is called the deviation of light. When a ray of light passes through a prism it suffers refraction twice. Once while it enters the prism and again while it emerges from it.
--[50 POINTS]--
1)A block of mass 25 kg is placed on flat ground. The coefficient of static friction and kinetic friction are 0.73 and 0.16
a.If a person pushes the block and the block is moving, what will be the acceleration of the block?
2) A block has a mass of 79 kg. The coefficient of static and kinetic friction between the sled and the ground is 0.87 and 0.37. Person A tries to pull the block with 210N, but fails.
a) Person B successfully pulls the sled with 909N. What is the acceleration of the sled?
Newton's second law allows us to find the results for the acceleration of the blocks are:
1) The acceleration is a = 559 m / s²
2) The acceleration is a = 7.88 m / s²
Newton's second law states that the net force is equal to the product of the mass and the acceleration of the body.
∑ F = m a
Where the bold letters indicate vectors, F is the force, m the mass and the acceleration of the body.
The reference system is a coordinate system with respect to which the decomposition of the forces is carried out, in the attached we have a free body diagram of the system.
1) They indicate that the body mass is 25 kg.
y-axis
N - W = 0
N = W = m g
x-axis
F -fr = ma
The friction force is a macroscopic force that results from the sum of all the microscopic interactions between the two surfaces, it has the formula
fr = μ N
Where fr is the friction force, N the normal and very the friction coefficient.
This friction coefficient has two values:
Static. For when with there is not relative motion between the two surfaces. Dynamic. When there is relative motion between the two surfaces.
We substitute.
F - μ m g = m a
a) The system moves which is the acceleration.
Suppose that the force that star to move the system keeps constant, just before the system begins to move the coefficient of friction is static, let's find the applied force.
F = μ m g
F = 0.73 25 9.8
F = 178.85 N
The block begins to move and the friction coefficient decreases to the dynamic value, we look for the acceleration.
a = [tex]\frac{F - \mu \ m g}{m}[/tex]
a = [tex]\frac{178.85 - 0.16 \ 25 \ 9.8 }{25}[/tex]
a = 5.59 m / s²
2) In this case the mass of the block is 79 kg and the applied force is
F = 909 N
We look for acceleration.
a = [tex]\frac{909 - 0.37 \ 79 \ 9.8 }{79}[/tex]
a = 7.88 m / S²
In conclusion using Newton's second law we can find the results for the acceleration of the blocks are:
1) The acceleration is a = 559 m / s²
2) The acceleration is a = 7.88 m / s²
Learn more here: brainly.com/question/11329269
QUESTION 5 When 235U is bombarded with one neutron, fission occurs and the products are three neutrons, 94Kr and?
a. 139Ba
b. 141Ba
c. 139Ce
d. 139Xe
Câu 1. Trường hợp nào dưới đây không phải là vật sáng?
A. Chiếc bút chì đặt trên bàn giữa ban ngày.
B. Chiếc bật lửa rơi giữa sân trường lúc trời nắng.
C. Mặt Trời.
Answer:
A
Explanation:
A. The pencil is on the table in broad daylight
If you traveled 50m/s for 60 seconds, how far did you travel? Remember speed=distance/time
Question options:
300 m/s
500 m/s
3,000 m/s
300 km/h
Answer:
3,000 m
Explanation:
speed = distance/time
distance = speed * time
= 50 * 60
= 3000 m
helphelphelp due in 5 minutes answer the question below