Yes, magnetic field reversals can help reconstruct Pangaea, the ancient supercontinent
How was magnetic field reversals on earth, to help reconstruct pangeaMagnetic field reversals on Earth provide evidence for the movement of tectonic plates and can be used to reconstruct the positions of continents in the past.
By analyzing the polarity of rocks and sediments, scientists can determine when they were formed relative to magnetic field reversals. This information can then be used to create paleomaps, which show the approximate positions of continents throughout Earth's history.
In the case of Pangaea, the magnetic signature of rocks from different continents indicates that they were once part of a single landmass, which broke apart and drifted to their current locations over millions of years.
Learn more about pangea at
https://brainly.com/question/8929008
#SPJ11
the motor in a furnace fan draws 90 a of current during its short startup time of 0.5 seconds. determine the amount of charge that passes through the circuit over that time.
a). 15 C
b) 45 C c) 180 C d) 90.5 C
The motor in a furnace fan draws 90 A of current during its short startup time of 0.5 seconds. The amount of charge that passes through the circuit over that time is 45 C. The correct answer is option b) 45 C.
To determine the amount of charge that passes through the circuit during the furnace fan motor's startup time, we will use the formula:
[tex]Charge (Q) = Current (I) * Time (t)[/tex]
In this case, the current (I) is 90 A and the time (t) is 0.5 seconds. Plugging these values into the formula, we get:
Q = 90 A × 0.5 s
Q = 45 C
So, the amount of charge that passes through the circuit over the 0.5 seconds startup time is 45 Coulombs. The correct answer is (b) 45 C.
Learn more about current here:
https://brainly.com/question/1100341
#SPJ11
Show that the radial wave function R₂1 for n = 2 and = 1 is normalized. (Use the following as necessary: r and a.)R =SOR&R=To normalize, we integrate over all r space.[infinity]. [infinity]∫ 2R*R dr=1/24a0⁵ ∫. (. )dr0. 0=1/24a0⁵(. )=so the wave function R21 was normalized.
Demonstrate the normalisation of the radial wave function R21 for n = 2 and l = 1. (If necessary, substitute r and a.) R =, so we integrate throughout the entire r space to normalise. The wave function R21 was normalised as a result of the equation r2R*R dr = dr 242, 1" CO 1 = 5 24a.
How can the normalisation of a wave function be demonstrated?A wave function is normalised by simply multiplying it by a constant to make sure that the probability of finding that particle is added up to one.
What does the wave function's normalisation constant mean?The normalisation constant and the equation also refer to the amplitude of the wave function that describes the particle in an infinite potential well For this constant, it is simple to solve for the amplitude after normalising the wave function.
To know more about wave function visit:-
https://brainly.com/question/17484291
#SPJ1
A high power line carries a current of 1.0 kA. What is the strength of the magnetic field this line produces at the ground, 10 m away? (μ0 = 4π × 10-7 T ∙ m/A)
A) 4.7 μT B) 6.4 μT C) 20 μT D) 56 μT
The main answer is: B) 6.4 μT. The magnetic field strength produced by the current-carrying high power line is calculated using the formula B = μ0I/2πr, where μ0 is the magnetic constant, I is current, and r is the distance from the wire. Plugging in the values and solving for B gives a result of 6.4 μT.
To find the strength of the magnetic field produced by the high power line at the ground, we can use the formula for the magnetic field strength due to a long straight current-carrying wire:
B = (μ0 * I) / (2 * π * r)
Where B is the magnetic field strength, μ0 is the permeability of free space (4π × 10^-7 T ∙ m/A), I is the current (1.0 kA), and r is the distance from the wire (10 m).
Step 1: Convert the current to amperes.
I = 1.0 kA = 1000 A
Step 2: Plug the values into the formula.
B = (4π × 10^-7 T ∙ m/A * 1000 A) / (2 * π * 10 m)
Step 3: Simplify and calculate the magnetic field strength.
B = (4 × 10^-4 T ∙ m) / 20 m
B = 2 × 10^-5 T
Step 4: Convert the magnetic field strength to microteslas (μT).
B = 2 × 10^-5 T * 10^6 μT/T = 20 μT
So, the strength of the magnetic field produced by the high power line at the ground, 10 m away, is 20 μT (option C).
To learn more about magnetic fields please visit:
https://brainly.com/question/14848188
#SPJ11
Two protons are located 1m apart compared to the gravitational force
of attraction between two protons'. The electrostatic force between protons
is
a) stronger and repulsive
b) weaker and Repulsive
c) stronger and attractive
d) weaker and attractive
The answer is a) stronger and repulsive. The electrostatic force between protons is caused by their positively charged particles. Protons have the same charge, and therefore, they repel each other due to their electrostatic force.
This force is much stronger than the gravitational force of attraction between protons, which is very weak. Therefore, the protons will repel each other with a strong electrostatic force.
The electrostatic force between two protons is:
a) stronger and repulsive
This is because protons have positive charges, and like charges experience a repulsive electrostatic force. This force is much stronger than the gravitational force of attraction between protons.
learn more about protons here
https://brainly.com/question/12535409
SPJ11
An electric rocket is to be designed to provide a Au, of 5.7 km/s. Given that the "burn" time is 3 months, and (a/n) is 10 kg/kW, calculate the optimum specific impulse, and the corresponding (M./Mo). Furnish either a table or a plot of Isp- (M/M) values to support your conclusion, and highlight the necessary information in it. {Ans.: 3700s, 0.7316)
The optimum specific impulse and corresponding (M/M) ratio for the electric rocket are 0.1 s and 300, respectively.
What is Specific impulse?Specific impulse (Isp) is a measure of the efficiency of a rocket engine, and is defined as the ratio of the thrust generated by the engine to the rate of fuel consumption. It is usually expressed in seconds, and is the amount of thrust a rocket engine can produce per unit of fuel consumed.
In order to calculate the optimum specific impulse and the corresponding (M/M) ratio for an electric rocket, it is necessary to first determine the total fuel mass required for the burn time.
This can be calculated using the equation:
Fuel Mass (kg) = (AU)(Burn Time)(a/n)
When substituting the values given, we obtain:
Fuel Mass (kg) = (5.7 km/s)(3 months)(10 kg/kW)
= 17.1 x 10 kg
= 171 kg
Now that we have the total fuel mass, we can calculate the optimum specific impulse and corresponding (M/M) ratio. This is done using the equation:
Isp (s) = (AU)(Burn Time)/(Fuel Mass)
Substituting the values given, we obtain:
Isp (s) = (5.7 km/s)(3 months)/(17.1 x 10 kg) = 0.1 s
The corresponding (M/M) ratio is then calculated as:
(M/M) = (Burn Time)(a/n)/(Isp (s))
Substituting the values given, we obtain:
(M/M) = (3 months)(10 kg/kW)/(0.1 s) = 300
Therefore, the optimum specific impulse and corresponding (M/M) ratio for the electric rocket are 0.1 s and 300, respectively.
To support this conclusion, a table or plot of Isp-(M/M) values can be used. The table or plot should include the following information:
• The specific impulse values for various (M/M) ratios
• The corresponding (M/M) ratio for the optimum specific impulse
• The optimum specific impulse and corresponding (M/M) ratio
The table or plot should also highlight the optimum specific impulse and corresponding (M/M) ratio, to illustrate why they are the best values for the electric rocket.
In conclusion, the optimum specific impulse and corresponding (M/M) ratio for the electric rocket are 0.1 s and 300, respectively.
For more questions related to fuel consumption
https://brainly.com/question/24338873
#SPJ1
Next, we will measure the potential difference across longer sections of the circuit and enter our measured values below. Place the red probe of the volonter at point E, and the black probe at the different points listed and enter your measured voltage values below. surement points the a Voltage across points E and H (V) (The red probe on E, black on It) - b. Voltage across points E and A (V) (The red probe E. black or A.) = c. Voltage across points E and C (V) (The red probe on E, blackos Question 4: From the experiments on our simple light bulb circuit, we find that other than the source of the voltage (the battery). (Please select the best answer from the choices provided) a a potential difference of 9 V exists between all points in the circuit b. a potential difference of 0 V exists between all points in the circuit c. a potential difference (voltage) only exists across components that have resistance. This is why the wires, which have no resistance, do not show a voltage drop. The light bulb on the other hand, has a resistance of 100 and therefore shows a volte drop d the potential difference increases between points and H. but then decreases between points and D
To measure the potential difference across longer sections of the circuit, we need to use a voltmeter. We can place the red probe of the voltmeter at point E, and the black probe at different points listed to measure the voltage across those points. We need to record our measured values below.
For example, to measure the voltage across points E and H, we place the red probe on E and the black probe on H, and record the voltage value. We repeat this process for other points listed and enter our measured values below.
In response to question 4, the correct answer is c. A potential difference (voltage) only exists across components that have resistance. This is why the wires, which have no resistance, do not show a voltage drop. The light bulb, on the other hand, has a resistance of 100 and therefore shows a voltage drop. So, a potential difference exists across components that have resistance, but not across all points in the circuit. The potential difference (voltage) may increase or decrease between certain points depending on the resistance of the components between those points.
what is the mass of a mallard duck whose speed is 8.2 m/s and whose momentum has a magnitude of 10 kg⋅m/s ?
The mass of the mallard duck whose speed is 8.2 and has a momentum of 10 kg.m/s is 1.22 kg.
To find the mass of the mallard duck, we will use the formula for momentum:
Momentum = Mass × Velocity
In this case, we are given the momentum (10 kg⋅m/s) and the velocity (8.2 m/s) and need to find the mass. We can rearrange the formula to solve for mass:
Mass = Momentum ÷ Velocity
Now, we can plug in the given values:
Mass = (10 kg⋅m/s) ÷ (8.2 m/s)
Mass = 1.22 kg
So, the mass of the mallard duck is approximately 1.22 kg.
Learn more about momentum:
https://brainly.com/question/18798405
#SPJ11
A distant star is traveling directly away from Earth with a speed of 38000 km/s. By what factor are the wavelengths in this star's spectrum changed?
The wavelengths in the star's spectrum are changed by a factor of 1.126 as it travels directly away from Earth at 38,000 km/s.
To calculate the factor by which the wavelengths in the star's spectrum are changed due to its motion away from Earth, we can use the Doppler Effect formula for redshift:
1 + z = λ_observed / λ_emitted
Where z is the redshift, λ_observed is the observed wavelength, λ_emitted is the emitted (rest) wavelength, and the factor 1+z represents the change in wavelengths. To find z, we can use the following formula related to the star's speed:
z = (v/c) / sqrt(1 - (v^2 / c^2))
Here, v is the star's speed (38,000 km/s), and c is the speed of light (approximately 300,000 km/s). Let's plug in the values:
z = (38,000 / 300,000) / sqrt(1 - (38,000^2 / 300,000^2))
z ≈ 0.126 / sqrt(1 - 0.016)
z ≈ 0.126 / 0.999
z ≈ 0.126
Now we can find the factor by which the wavelengths are changed:
1 + z = 1 + 0.126 = 1.126
So, the wavelengths in the star's spectrum are changed by a factor of 1.126 as it travels directly away from Earth at 38,000 km/s.
Learn more about spectrum: https://brainly.com/question/1968356
#SPJ11
two identical charges, each 50 x 10-6 c and mass 25 micrograms are attached to the end of a 5 mm rod. how fast must the rod spin such that the electrostatic force equals the centripetal force
The electrostatic force equals the centripetal force.When the rod must spin at a speed of 0.109 m/s .
How the electrostatic force equals the centripetal force?The electrostatic force between the two charges can be calculated using Coulomb's Law:
F = kˣq²/r²
where k is the Coulomb constant, q is the charge, and r is the distance between the charges.
For two identical charges, the force can be written as:
F = (kˣq²)/(2r²)
The centripetal force required to keep the charges moving in a circle can be calculated using:
F = mˣv²/r
where m is the mass of each charge, v is the velocity of the charges, and r is the distance between the charges.
To find the velocity required for the electrostatic force to equal the centripetal force, we can set the two equations equal to each other:
(kq²)/(2r²) = mv²/r
Solving for v, we get:
v = sqrt((kq²)/(2mr))
Substituting the given values, we get:
v = √((9 x 10⁹ Nm²/C²)(50 x 10⁻⁶ C)²/(2*(25 x 10⁻⁶ kg)ˣ(5 x 10⁻³ m)))
v = 0.109 m/s
Therefore, the rod must spin at a speed of 0.109 m/s such that the electrostatic force equals the centripetal force.
Learn more about electrostatic force
brainly.com/question/9774180
#SPJ11
A 60.0 kg person bends his knees and then jumps straight up. After his feet leave the floor, his motion is unaffected by air resistance, and his center of mass rises by a maximum of 14.9 cm. Model the floor as completely solid and motionless.
(a) Does the floor impart impulse to the person?
(b) Does the floor do work on the person?
(c) With what momentum does the person leave the floor?
(d) Does it make sense to say that this momentum came from the floor? Explain your answer.
(e) With what kinetic energy does the person leave the floor?
(f) Does it make sense to say that this energy came from the floor? Explain your answer.
(A) The individual receives an impulse from the ground because an impulse is equal to a change in momentum, and when a person jumps up from the ground, their momentum changes.
(b) The individual is affected by the floor, yes. When a force works over a distance, work is produced; in this instance, the floor pushes the person upward over a distance equal to the height of the leap.
(C) The equation p = mv, where m is the person's mass and v is their forward velocity, determines the momentum of the subject prior to jumping. The person's initial momentum was zero since they were at rest when they jumped.
The momentum of the person after they leave the floor is also given by p = mv, where m is the mass of the person and v is their velocity after jumping. We can use conservation of energy to find their velocity after jumping:
[tex]mgh = (1/2)mv^2[/tex]
Here g is the acceleration due to gravity, h is the height that the person jumps, and the factor of 1/2 comes from the fact that the person starts from rest. Solving for v, we get:
v = [tex]\sqrt{(2gh)}[/tex]
v = [tex]\sqrt{(2 * 9.8 * 0.149 m)}[/tex] ≈ 1.94 m/s
So the momentum of the person after leaving the floor is:
p = mv = (60.0 kg)(1.94 m/s) ≈ 116.4 kg m/s
(d) No, it doesn't make sense to say that the momentum came from the floor. Momentum is always conserved, so the person's momentum after jumping must be equal to their momentum before jumping. In this case, the person's momentum before jumping was zero.
(e) The kinetic energy of the person after leaving the floor is given by:
KE = [tex](1/2)mv^2[/tex], where m is the mass of the person and v is their velocity after jumping. Plugging in the given values, we get:
KE = [tex](1/2)(60.0 kg)(1.94 m/s)^2[/tex] ≈ 354 J
(f) No, it doesn't make sense to say that the energy came from the floor. Energy is always conserved, so the person's kinetic energy after jumping must be equal to the work done on them by external forces. In this case, the only external force doing work on the person is gravity.
Learn more about impulse visit: brainly.com/question/30395939
#SPJ4
A plane takes off from Charles de Gaulle Airport at a bearing of N 43' E with an average speed of 516 miles per hour over 1.5 hours. Another plane takes off from Charles de Gaulle Airport at the same time as the first plane at a bearing of S 56 E with an average speed of 508 miles per hour over 1.5 hours. How far apart are the two planes after 1.5 hours rounded to the nearest mile?
The two planes are approximately 1008 miles apart after 1.5 hours.
1. Calculate the distance each plane traveled:
Plane 1: Distance = Speed × Time = 516 mph × 1.5 hours = 774 miles
Plane 2: Distance = Speed × Time = 508 mph × 1.5 hours = 762 miles
2. Calculate the angle between the two bearings:
Angle = 180° - (43° + 56°) = 180° - 99° = 81°
3. Use the law of cosines to find the distance between the two planes:
Distance = √(774² + 762² - 2 × 774 × 762 × cos(81°))
4. Calculate the distance:
Distance ≈ 1008.23 miles
5. Round to the nearest mile:
Distance ≈ 1008 miles
Therefore, The two planes are approximately 1008 miles apart after 1.5 hours.
To know more about Miles refer here :
https://brainly.com/question/30404061
#SPJ11
A 6.6 Kg rock breaks loose from the edge of a cliff that is 44.5 m above the surface of a lake.
A. How much GPE does the rock have initially?
B. How much GPE and KE will it have when it is halfway down?
C. How fast will it be going when it is halfway down?
(A)Gravitational potential energy GPE does the rock have initially 2674.92 Joules,(B) As the rock is halfway down, it has lost its entire GPE and converted it into KE. So, the KE will be equal to the GPE at this point i.e.1337.96J (C).The rock will be traveling at a speed of approximately 20.15 m/s when it is halfway down.
(A) The gravitational potential energy (GPE) of the rock initially can be calculated using the formula:
GPE = mgh
where:
m = mass of the rock = 6.6 kg
g = acceleration due to gravity = 9.8 m/s²
h = height of the cliff = 44.5 m
Plugging in the values:
GPE = 6.6 kg × 9.8 m/s² × 44.5 m = 2,674.92 J (Joules)
So, the rock initially has 2,674.92 Joules of gravitational potential energy.
(B) When the rock is halfway down, its height would be half of the original height, i.e., h/2 = 44.5 m / 2 = 22.25 m.
The gravitational potential energy (GPE) of the rock when it is halfway down can be calculated using the formula mentioned above:
GPE = mgh
where:
m = mass of the rock = 6.6 kg
g = acceleration due to gravity = 9.8 m/s²
h = height when halfway down = 22.25 m
Plugging in the values:
GPE = 6.6 kg × 9.8 m/s² × 22.25 m = 1,337.96 J (Joules)
The kinetic energy (KE) of the rock when it is halfway down can be calculated using the formula:
KE = (1/2)mv²
where:
m = mass of the rock = 6.6 kg
v = velocity of the rock
As the rock is halfway down, it is lost, its entire GPE and converted it into KE. So, the KE is equal to the GPE at this point.
KE = 1,337.96 J (Joules)
(C) To calculate the velocity (v) of the rock when it is halfway down, we can equate the KE to the formula for kinetic energy:
KE = (1/2)mv²
Plugging in the values:
1,337.96 J = (1/2) ×6.6 kg × v²
v² = (2 × 1,337.96 J) / 6.6 kg
v² = 406.32 m/s
v = √(406.32 m/s) = 20.15 m/s
So, the rock is traveling at a speed of approximately 20.15 m/s when it is halfway down.
To know more about GPE
https://brainly.com/question/17193232
#SPJ1
A 5.4 g lead bullet moving at 294 m/s strikes a steel plate and stops. If all its kinetic energy is converted to ther- mal energy and none leaves the bullet, what is its temperature change? Assume the specific heat of lead is 128 J/kg.° C. Answer in units of °C.
The temperature change of the bullet is 122.92 °C.
What do you understand by kinetic energy?Kinetic energy is the energy possessed by a moving object by virtue of its motion.
The kinetic energy (KE) of the bullet is given by:
KE = 1/2 * m * v^2
where m is the mass of the bullet and v is its velocity.
Substituting the given values, we get:
KE = 1/2 * 0.0054 kg * (294 m/s)^2
KE = 112.19 J
All this kinetic energy is converted to thermal energy, which can be expressed as:
Q = m * c * ΔT
where Q is the thermal energy, m is the mass of the bullet, c is the specific heat capacity of lead, and ΔT is the change in temperature.
Substituting the given values and solving for ΔT, we get:
ΔT = Q / (m * c)
ΔT = 112.19 J / (0.0054 kg * 128 J/kg.°C)
ΔT = 122.92 °C
Therefore, the temperature change of the bullet is 122.92 °C.
Learn more about energy here:
https://brainly.com/question/1932868
#SPJ1
what is the power in diopters of a camera lens that has a 51.0 mm focal length?
The power of the camera lens is approximately 19.61 diopters.
The power of a lens is its ability to converge or diverge light rays passing through it. It is measured in diopters. The power of the lens is determined by its focal length, which is the distance between the lens and the image plane when the lens is focused on an object at infinity.
The power in diopters of a camera lens with a 51.0 mm focal length can be calculated using the formula:
D = 1 /f
Here,
D is the power of the camera lens in diopters
f is the focal length of the camera lens in meters
First, convert the focal length to meters:
51.0 mm = 0.051 m
Now, calculate the power in diopters:
Power (D) = 1 / 0.051 m ≈ 19.61 diopters
To know more about power of a camera lens, click here;
https://brainly.com/question/31056966
#SPJ11
A gas storage tank of fixed volume V contains N molecules of an ideal gas at temperature T. The pressure at kelvin temperature T is 20 MPa. molecules are removed and the temperature changed to 27T. What is the new pressure of the gas? O 10 MPa O B. 15 MPa OC. 30 MPa OD. 40 MPa
we can see from the equation that P2 is proportional to (N - ΔN), which is the number of molecules remaining in the tank. Since some molecules are removed, (N - ΔN) is less than N, so P2 must be less than 20 MPa. Therefore, the answer is (B) 15 MPa, which is the closest option to 20/27 times 20 MPa.
We can use the ideal gas law to solve this problem:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in kelvin.
Since the volume of the gas storage tank is fixed, V is constant. Also, the number of molecules of the gas is proportional to the number of moles of the gas, so we can use N as a proxy for n. Therefore, we can write:
P1V = NRT1
where P1 is the initial pressure, T1 is the initial temperature (in kelvin), and N is the initial number of molecules.
When some molecules are removed from the tank, the number of molecules becomes N - ΔN, where ΔN is the number of molecules removed. The new pressure, P2, can be found using the ideal gas law again:
P2V = (N - ΔN)RT2
where T2 is the final temperature (27T in this case).
We can rearrange these equations to solve for P2:
P2 = (N - ΔN)RT2 / V
Substituting the given values and simplifying, we get:
P2 = (N - ΔN)RT / V * 27
P2 = (N - ΔN) * P1 / 27
P2 = (N - ΔN) * 20 MPa / 27 MPa
P2 = (N - ΔN) * 20 / 27 MPa
We are not given the value of ΔN, so we cannot calculate P2 exactly. However, we can see from the equation that P2 is proportional to (N - ΔN), which is the number of molecules remaining in the tank. Since some molecules are removed, (N - ΔN) is less than N, so P2 must be less than 20 MPa. Therefore, the answer is (B) 15 MPa, which is the closest option to 20/27 times 20 MPa.
Visit to know more about Molecules:-
brainly.com/question/26556885
#SPJ11
calculate the gravitational potential energy of a 9.3- kgkg mass on the surface of the earth.
The gravitational potential energy of the 9.3-kg mass on the surface of the Earth is zero joules.
What is Gravitational Potential Energy?
Gravitational potential energy is the energy possessed by an object due to its position in a gravitational field. It is defined as the amount of work done in lifting an object of mass "m" against the force of gravity "F" from a reference point to a certain height "h" above that point.
The gravitational potential energy (U) of an object with mass (m) at a height (h) above the surface of the Earth can be calculated using the formula:
U = mgh
where g is the acceleration due to gravity near the surface of the Earth, which is approximately 9.81 m/s^2.
Given that the mass of the object is 9.3 kg and it is on the surface of the Earth (h = 0), we can calculate the gravitational potential energy as:
U = (9.3 kg) x (9.81 m/s^2) x (0 m) = 0 J
Learn more about Gravitational Potential Energy from the given link
https://brainly.com/question/15896499
#SPJ1
research has shown that day vs. night conditions may require different lighting schemes. what type of lighting may be better for nighttime conditions?
The type of lighting that may be better for nighttime conditions is warm, low-intensity lighting.
Research has shown that our eyes function differently during day and night conditions, which is why different lighting schemes are necessary. During nighttime, our eyes are more sensitive to light, and therefore, it is crucial to use warm, low-intensity lighting.
This type of lighting minimizes glare, reduces eye strain, and helps maintain our circadian rhythm. Warm lighting, with a color temperature between 2700K and 3000K, is more comfortable for our eyes, as it emits a soft, yellowish hue similar to that of incandescent bulbs.
Low-intensity lighting is also essential to avoid disrupting sleep patterns and ensure safety while navigating in the dark.
To summarize, using warm, low-intensity lighting during nighttime conditions can enhance visual comfort, promote relaxation, and support our natural circadian rhythms.
Learn more about incandescent here:
https://brainly.com/question/23286172
#SPJ11
calculate the energy stored in a 2m Long copper wire of cross sectional area 0.5mm^2 .If a force of 50N is Applied to it.(Young's modulus.
The energy stored in the copper wire when a force of 50 N is applied to it is approximately 1.32 Joules.
What is the energy stored?To calculate the energy stored in a copper wire when a force is applied to it, we can use the formula for elastic potential energy:
Elastic potential energy (U) = 0.5 * stress * strain * volume
First, let's calculate the stress (σ) applied to the wire using Young's modulus (Y), which is a measure of the stiffness of the material:
Young's modulus for copper (Y) = 117 GPa = 117 * 10^9 Pa (Pa = Pascal)
Stress (σ) = Force (F) / Area (A)
Given: Force (F) = 50 N
Cross-sectional area (A) = 0.5 mm² = 0.5 * 10^(-6) m²
Plugging these values into the formula, we get:
Stress (σ) = 50 N / 0.5 * 10^(-6) m²
Now, let's calculate the strain (ε) of the wire. Strain is defined as the change in length (ΔL) divided by the original length (L0) of the wire:
Strain (ε) = Change in length (ΔL) / Original length (L0)
The change in length (ΔL) can be calculated using Hooke's law, which states that stress is proportional to strain:
Stress (σ) = Young's modulus (Y) * Strain (ε)
Rearranging the equation for strain, we get:
Strain (ε) = Stress (σ) / Young's modulus (Y)
Plugging in the values for stress and Young's modulus, we get:
Strain (ε) = 50 N / (117 * 10^9 Pa)
Now, let's calculate the volume (V) of the wire. The volume of a cylinder (such as a wire) can be calculated using the formula:
Volume (V) = Cross-sectional area (A) * Length (L)
Given: Length (L) = 2 m
Cross-sectional area (A) = 0.5 * 10^(-6) m²
Plugging in the values for length and cross-sectional area, we get:
Volume (V) = 0.5 * 10^(-6) m² * 2 m
Now, we can plug all the calculated values (stress, strain, and volume) into the formula for elastic potential energy:
Elastic potential energy (U) = 0.5 * Stress (σ) * Strain (ε) * Volume (V)
Plugging in the values, we get:
Elastic potential energy (U) = 0.5 * (50 N / 0.5 * 10^(-6) m²) * (50 N / (117 * 10^9 Pa)) * (0.5 * 10^(-6) m² * 2 m)
Elastic potential energy (U) ≈ 1.32 J (rounded to two decimal places)
Learn more about stored energy here: https://brainly.com/question/22252564
#SPJ1
a position of a particle moving in the xy plane is x = t^3 - 6t^3 9t 1
The plane in which the particle is moving is the xy plane, which is a two-dimensional plane that is perpendicular to the z-axis.
Tell the position of a particle moving in the xy plane?
The position of a particle moving in the xy plane is given by the equation
x = t³ - 6t² + 9t + 1.
This equation describes the position of the particle as it moves along the x-axis with respect to time t. The particle's motion in the xy plane can be described by a curve in three-dimensional space, where the x-coordinate of the curve is given by the equation
x = t³ - 6t² + 9t + 1,
and the y and z coordinates are determined by the motion of the particle in the y and z directions. The plane in which the particle is moving is the xy plane, which is a two-dimensional plane that is perpendicular to the z-axis.
Learn more about position of a particle.
brainly.com/question/25066591
#SPJ11
A 76 kg bike racer climbs a 1500-m-long section of road that has a slope of 4.3 ∘ .
Part A
By how much does his gravitational potential energy change during this climb?
The gravitational potential energy of the bike racer after climbing a 1500 m long road at 4.3 degrees is 83,851.7 Joules.
To calculate the change in gravitational potential energy during the climb, we can use the formula:
Gravitational Potential Energy (GPE) = m * g * h
Where:
m = mass (76 kg)
g = gravitational acceleration (approximately 9.81 m/s²)
h = vertical height gained
First, we need to find the vertical height gained (h). We can use trigonometry to do this. Since we have the length of the road (1500 m) and the slope (4.3°), we can find the height using the sine function:
sin(slope) = height / length
height = sin(4.3°) * 1500 m
Now, let's calculate the height:
height = 0.0749 * 1500
height = 112.46 m
Now that we have the height, we can calculate the change in gravitational potential energy:
GPE = 76 kg * 9.81 m/s² * 112.46 m
GPE = 83851.7 J (Joules)
The gravitational potential energy changes by 83,851.7 Joules during the climb.
Learn more about gravitational potential energy:
https://brainly.com/question/15896499
#SPJ11
The gravitational potential energy of the bike racer after climbing a 1500 m long road at 4.3 degrees is 83,851.7 Joules.
To calculate the change in gravitational potential energy during the climb, we can use the formula:
Gravitational Potential Energy (GPE) = m * g * h
Where:
m = mass (76 kg)
g = gravitational acceleration (approximately 9.81 m/s²)
h = vertical height gained
First, we need to find the vertical height gained (h). We can use trigonometry to do this. Since we have the length of the road (1500 m) and the slope (4.3°), we can find the height using the sine function:
sin(slope) = height / length
height = sin(4.3°) * 1500 m
Now, let's calculate the height:
height = 0.0749 * 1500
height = 112.46 m
Now that we have the height, we can calculate the change in gravitational potential energy:
GPE = 76 kg * 9.81 m/s² * 112.46 m
GPE = 83851.7 J (Joules)
The gravitational potential energy changes by 83,851.7 Joules during the climb.
Learn more about gravitational potential energy:
https://brainly.com/question/15896499
#SPJ11
For an atomic gas with an atom density of N=1021m*, due to a resonance of the bound electrons (one bound electron per atom), the relative permittivity of the atomic gas can be described by the Lorentz model. If the static relative permittivity is Est=9, and the high- frequency relative permittivity is Eo=6.
Calculate the resonant angular frequency w, of the bound electrons.
The resonant angular frequency of the bound electrons is approximately 3.32 x 10¹⁵ rad/s.
The resonant angular frequency of the bound electrons can be calculated using the Lorentz model formula:
w = (Ne²/mεo) * [(Est - Eo)/(Est + 2Eo)]
where N is the atom density, e is the electron charge, m is the electron mass, εo is the permittivity of free space, Est is the static relative permittivity, and Eo is the high-frequency relative permittivity.
Substituting the given values:
w = (10²¹ * (1.6 x 10⁻¹⁹)²/(9.1 x 10⁻³¹* 8.85 x 10⁻¹²)) * [(9-6)/(9+2*6)]
w ≈ 3.32 x 10¹⁵rad/s
To know more about relative permittivity click on below link:
https://brainly.com/question/29288724#
#SPJ11
A nuclear submarine approaches the surface of the ocean at 25.0 km/h at an angle of 17.3° with the surface. What are the components of its velocity'?
The components of the nuclear submarine's velocity are approximately 23.8 km/h horizontally and 7.5 km/h vertically as it approaches the surface of the ocean at 25.0 km/h at an angle of 17.3°.
To find the components of the nuclear submarine's velocity as it approaches the surface of the ocean at 25.0 km/h at an angle of 17.3°, we will use trigonometry.
Step 1: Identify the angle and velocity
Angle = 17.3°
Velocity = 25.0 km/h
Step 2: Calculate the horizontal (x) component of velocity
Horizontal component (Vx) = Velocity * cos(Angle)
Vx = 25.0 km/h * cos(17.3°)
Step 3: Calculate the vertical (y) component of velocity
Vertical component (Vy) = Velocity * sin(Angle)
Vy = 25.0 km/h * sin(17.3°)
Step 4: Compute the values
Vx ≈ 25.0 km/h * 0.9537 ≈ 23.8 km/h
Vy ≈ 25.0 km/h * 0.2981 ≈ 7.5 km/h
Therefore, the components of the nuclear submarine's velocity are approximately 23.8 km/h horizontally and 7.5 km/h vertically as it approaches the surface of the ocean at 25.0 km/h at an angle of 17.3°.
Learn more about trigonometry : brainly.com/question/22698523
#SPJ11
An object is in equilibrium at 400 k. calculate its change in helmholtz free energy when heat is transferred from the object to lower its temperature to 288 k while the environment remains at 400 k.
The magnitude of the change in Helmholtz free energy is proportional to the amount of heat transferred and the object's specific heat capacity at constant volume. In this case, the change in Helmholtz free energy is equal to -(Cv × (288 K - 400 K)).
What is Equilibrium?
In general, equilibrium refers to a state of balance or stability in a system. It occurs when the various forces or factors that act upon a system are in balance, such that there is no net change or motion.
When heat is transferred from the object to the environment, the object's temperature decreases to 288 K, and its internal energy decreases by an amount equal to the heat transferred (Q). Since the object is in equilibrium, its volume is also constant, which means that its change in entropy is zero.
Therefore, the change in Helmholtz free energy of the object is given by:
ΔF = ΔU - TΔS = -Q - TΔS
where Q is the heat transferred from the object to the environment, and ΔS is zero. The heat transferred can be calculated using the object's specific heat capacity at constant volume (Cv), which is the amount of heat required to raise the temperature of the object by one degree Kelvin:
Q = Cv × ΔT
where ΔT is the change in temperature of the object, which is given by the difference between the initial and final temperatures:
ΔT = T_f - T_i
Substituting these values into the equation for ΔF gives:
ΔF = -(Cv × ΔT) = -(Cv × (T_f - T_i)) = -(Cv × (288 K - 400 K))
To learn more about Equilibrium visit:
https://brainly.com/question/517289
#SPJ4
. a proton starting from rest falls through a potential difference of magnitude equal to 35000.0 volts. how much kinetic energy does the proton acquire assuming energy is conserved?
After passing through a 35000.0 volt potential difference, the proton gains a kinetic energy of 5.607 x 10⁻¹⁵ J and a final velocity of 3.07 x 10⁶ m/s.
What potential difference does the acceleration of an electron and a proton begin at?Through a 100 kV potential difference, an electron and a proton that are at rest are accelerated.
The change in electric potential energy that the proton experiences as it goes from its beginning location to its final position is given by the potential difference V of 35000.0 volts: ΔU = qV
The charge of a proton is q = +1.602 x 10⁻¹⁹ C.
ΔU = (1.602 x 10⁻¹⁹ C) * (35000.0 V) = 5.607 x 10⁻¹⁵ J
A particle with mass m and velocity v has the following kinetic energy:
K = (1/2) * m * v²
The proton has no initial kinetic energy since it is initially at rest. The proton's final kinetic energy, K', is as follows:
K' = ΔU = 5.607 x 10⁻¹⁵ J
Substituting the mass of a proton m = 1.673 x 10⁻²⁷ kg, we can solve for the final velocity v:
K' = (1/2) * m * v²
v = sqrt(2K'/m) = sqrt[(2*5.607 x 10⁻¹⁵ J) / (1.673 x 10⁻²⁷ kg)] = 3.07 x 10⁶ m/s
To know more about kinetic energy visit:-
https://brainly.com/question/21245662
#SPJ1
At a certain point on the trackway, a roller coaster car has 27,000 J of potential energy and 132,000 J of kinetic energy. The value 159,000 J equals _____ of the coaster car at this point.
the total mechanical energy plus dissipated energy
the total internal and external energy
the total mechanical energy
the total mechanical energy minus dissipated energy
The value 159,000 J equals the total mechanical energy of the coaster car at this point. The 3rd option is the correct option.
In the physics mechanical energy (M.E) at a point in space =P.E (potential energy)+k.E(kinetic energy). Mechanical energy of a body is a constant in a scenario, all the changes that are observed is either in P.E or K.E, if one increase with x J the other will decrease with x J ,thus their sum or mechanical energy remain constant.
Given in the problem P.E is 27,000 J and K.E is 132,000 J on adding we found that their sum is 159,000 J, so the sum of these energies represent the Mechanical energy of the rollar coaster.
To learn more about mechanical energy go to:
https://brainly.com/question/11695177?referrer=searchResults
HELP ASAP PLEASE!! WILL MARK BRAINLIEST
A downward slope from the peak to the energy level of the products should be visible on the resulting graph, demonstrating that energy was released during the exothermic reaction.
How do you depict the exothermic reaction's reaction profile?The steps below should be followed to draw the reaction profile of an exothermic process.
To illustrate the energy of the reactants, draw a horizontal line.
To illustrate the energy needed to reach the activated complex, draw a peak at the transition state.
Make a downhill slope to symbolize the energy that is released during the reaction.
At each product's energy level, draw a horizontal line.
Put energy on the y-axis of the graph and the reaction coordinate (or reaction progress) on the x-axis.
Learn more about exothermic reaction:https://brainly.com/question/6843541
#SPJ1
what is the weight of a 100 oz box? use acceleration of gravity, g = 32 or g =9.8. provide answer in fps or mks units.
The weight of a 100 oz box is either 200 lbs or 27.78231 kg depending on the units used for acceleration due to gravity.
To find the weight of a 100 oz box, we'll first need to convert ounces to either pounds (for fps units) or kilograms (for mks units), and then multiply by the acceleration due to gravity (g).
Convert ounces to pounds or kilograms
1 ounce (oz) = 0.0625 pound (lb)
1 ounce (oz) = 0.0283495 kilogram (kg)
100 oz = 100 * 0.0625 lb = 6.25 lb (for fps units)
100 oz = 100 * 0.0283495 kg = 2.83495 kg (for mks units)
Calculate weight using acceleration due to gravity
Weight in fps units:
g_fps = 32 ft/s²
Weight_fps = mass (lb) * g_fps
Weight_fps = 6.25 lb * 32 ft/s² = 200 lb*ft/s²
Weight in mks units:
g_mks = 9.8 m/s²
Weight_mks = mass (kg) * g_mks
Weight_mks = 2.83495 kg * 9.8 m/s² ≈ 27.78231 kg*m/s² (Newtons)
So, the weight of a 100 oz box is approximately 200 lb*ft/s² in fps units and 27.78231 kg*m/s² (Newtons) in mks units.
More on weight: https://brainly.com/question/30713045
#SPJ11
what is the maximum permissible current in a 10 ω, 4 w resistor? what is the maximum voltage that can be applied across the resistor
The maximum permissible current in the resistor is 0.632 A. The maximum voltage that can be applied across the resistor is 6.32 V.
To determine the maximum permissible current in a 10 Ω, 4 W resistor, we can use the formula: I = √(P/R), where I is the current, P is the power, and R is the resistance.
Substituting the values given, we get: I = √(4/10) = 0.632 A. Therefore, the maximum permissible current in the resistor is 0.632 A.
To find the maximum voltage that can be applied across the resistor, we can use Ohm's law: V = IR, where V is the voltage, I is the current, and R is the resistance.
Substituting the values given and using the maximum permissible current found above, we get: V = (0.632 A) x (10 Ω) = 6.32 V. Therefore, the maximum voltage that can be applied across the resistor is 6.32 V.
To know more about voltage, refer here:
https://brainly.com/question/13521443#
#SPJ11
how to put numbers in scientific notation
To put numbers in scientific notation we use power of 10.
What is scientific notation?Scientific notation is a way or pattern of presenting very large numbers or very small numbers in a simpler form.
Scientific notation is a way of expressing numbers that are too large or too small to be conveniently written in decimal form, since to do so would require writing out an unusually long string of digits.
Usually, we use standard form while presenting numbers in scientific notation.
This standard form is usually in power of 10, for we can 0.0001 m in scientific notation as;
0.0001 m = 1 x 10⁻⁴ m
Learn more about scientific notation here: https://brainly.com/question/1767229
#SPJ1
what if? what would be the magnitude and direction of the initial acceleration of an electron moving with velocity 3.08 ✕ 105 m/s into the page at point p?
The initial downward acceleration of the electron relies on the strength of the magnetic field, which is not specified in the issue, and the acceleration's magnitude.
What does a proton weigh?The proton is a stable subatomic particle with a rest mass of 1.67262 1027 kg, or 1,836 times the mass of an electron, and an equivalent positive charge to that of an electron.
What does neutron mass mean?Except for ordinary hydrogen, all atomic nuclei contain neutrons, which are neutral subatomic particles. Its rest mass, which is 1,838,68 times more than the electron's but only slightly higher than the proton's, is 1.67492749804 1027 kg. Electrically, it is not charged.
To know more about magnetic field visit:-
https://brainly.com/question/23096032
#SPJ1