Can you help me with this? I don’t understand it..

The given sequence is an = n/(42+3n).

To determine whether it converges or diverges, we can use the limit comparison test. Taking the limit as n approaches infinity of the ratio of an and n, we get lim n→[infinity] an/n = lim n→[infinity] n/(n(42/ n+3)) = lim n→[infinity] 1/(42/ n+3) = 1/42.

Since the limit is a finite positive number, the sequence converges. To find the limit, we can use the fact that the sequence converges to the same limit as an = 1/(42/ n+3).

Taking the limit as n approaches infinity of 1/(42/ n+3), we get lim n→[infinity] 1/(42/ n+3) = 0. Therefore, the limit of the given sequence is 0.

To know more about limit comparison test click on below link:

https://brainly.com/question/22283016#

#SPJ11

Complet question:

determine whether the sequence converges or diverges. if it converges, find the limit. (if an answer does not exist, enter dne.) an =  n/(42+3n) lim n→[infinity] an =

The given sequence is an = n/(42+3n).

To determine whether it converges or diverges, we can use the limit comparison test. Taking the limit as n approaches infinity of the ratio of an and n, we get lim n→[infinity] an/n = lim n→[infinity] n/(n(42/ n+3)) = lim n→[infinity] 1/(42/ n+3) = 1/42.

Since the limit is a finite positive number, the sequence converges. To find the limit, we can use the fact that the sequence converges to the same limit as an = 1/(42/ n+3).

Taking the limit as n approaches infinity of 1/(42/ n+3), we get lim n→[infinity] 1/(42/ n+3) = 0. Therefore, the limit of the given sequence is 0.

To know more about limit comparison test click on below link:

https://brainly.com/question/22283016#

#SPJ11

Complet question:

determine whether the sequence converges or diverges. if it converges, find the limit. (if an answer does not exist, enter dne.) an =  n/(42+3n) lim n→[infinity] an =

The exact sum of the infinite geometric series [infinity] 1 5 k k = 2 is 2 and the exact sum of the infinite geometric series does not exist, and the answer is "diverges."

To find the sum of an infinite geometric series, we use the formula:
Sum = a / (1 - r)
where a is the first term and r is the common ratio.
In this case, a = 1 and r = 5/2 (since each term is 5/2 times the previous term).
Thus, the sum of the infinite geometric series is:
Sum = 1 / (1 - 5/2) = 1 / (1/2) = 2
Therefore, the exact sum of the infinite geometric series [infinity] 1 5 k k = 2 is 2.
To find the exact sum of an infinite geometric series, we need to determine if it converges or diverges. In this case, the series is given by:
Σ (5^k), where k starts at 2 and goes to infinity.
To determine if the series converges or diverges, we must find the common ratio. The common ratio (r) in this series is 5. For an infinite geometric series to converge, the absolute value of the common ratio must be less than 1 (i.e., |r| < 1).
Since the absolute value of the common ratio in this series is greater than 1 (|5| > 1), the series diverges. Therefore, the exact sum of the infinite geometric series does not exist, and the answer is "diverges."

To learn more about infinite geometric series, click here:

brainly.com/question/23602882

#SPJ11

The statement that is TRUE regarding boxes randomly sampled from the filling process is that in a very large sample of boxes, you are certain to get at least one underfilled box. This can be answered by the concept of Probability.

The probability of a box being underfilled is 0.10 or 10%. In a large sample of boxes, as the number of sampled boxes increases, the likelihood of encountering at least one underfilled box also increases. This is because the probability of at least one box being underfilled becomes virtually certain in a large sample size. As the sample size approaches infinity, the probability of encountering at least one underfilled box approaches 100%.

Therefore, in a very large sample of boxes, you are certain to get at least one underfilled box

To learn more about Probability here:

brainly.com/question/30034780#

#SPJ11

By using the Direct Comparison Test, the series Σ (1/n!) from n=0 to infinity converges.

We have to use the Direct Comparison Test to determine the convergence or divergence of the series.

The series in question is:
Σ (1/n!) from n=0 to infinity.

To use the Direct Comparison Test, we need to find another series that we can compare it to.

We will use the series:
Σ (1/2ⁿ) from n=0 to infinity.

Now, let's follow the steps to apply the Direct Comparison Test:

1. Compare the terms of the two series:
For all n ≥ 0, we have 0 ≤ 1/n! ≤ 1/2ⁿ, since n! grows faster than 2ⁿ.

2. Determine the convergence or divergence of the known series:
The series Σ (1/2ⁿ) from n=0 to infinity is a geometric series with a common ratio of 1/2, which is less than 1.

Therefore, the series converges.

3. Apply the Direct Comparison Test:
Since 0 ≤ 1/n! ≤ 1/2ⁿ for all n ≥ 0 and the series Σ (1/2ⁿ) converges, by the Direct Comparison Test, the series Σ (1/n!) from n=0 to infinity also converges.

So, by using the Direct Comparison Test, we've determined that the series Σ (1/n!) from n=0 to infinity converges.

Learn more about series:

https://brainly.com/question/24643676

#SPJ11

Answer:

(A)=9

Step-by-step explanation:

ab+9/c

-3×-2 + 9/2

(-×-=+)

6+3

(A)=9

The function f(x, y, z) that satisfies F = ∇f is f(x, y, z) = xyz + 3xz + 3yz² + 6zk + C, where C is a constant. The integral of ∇f · dr along C is given by:

∫∇f · dr = f(x2, y2, z2) - f(x1, y1, z1) = f(5, 6, 3) - f(3, 0, -1).

To find the function f(x, y, z) such that F = ∇f, we need to determine the gradient of f and equate it to F.

Gradient of f = ∇f = (∂f/∂x)i + (∂f/∂y)j + (∂f/∂z)k

Comparing the components of ∇f with F:

∂f/∂x = yz (1)

∂f/∂y = xz (2)

∂f/∂z = xy + 6z (3)

To solve for f, we integrate each of the partial derivatives with respect to their respective variables.

From equation (1), integrating with respect to x:

f(x, y, z) = xyz + g(y, z), where g(y, z) is a function of y and z.

Taking the partial derivative of f(x, y, z) with respect to y and comparing with equation (2):

∂f/∂y = xz + (∂g/∂y) = xz

∂g/∂y = 0

Integrating g(y, z) with respect to y:

g(y, z) = yz² + h(z), where h(z) is a function of z.

Taking the partial derivative of f(x, y, z) with respect to z and comparing with equation (3):

∂f/∂z = xy + 6z + (∂h/∂z) = xy + 6z

∂h/∂z = 0

Integrating h(z) with respect to z:

h(z) = 6zk + C, where C is a constant.

Substituting the expressions for g(y, z) and h(z) back into f(x, y, z):

f(x, y, z) = xyz + 3xz + 3yz² + 6zk + C

Therefore, the function f(x, y, z) that satisfies F = ∇f is f(x, y, z) = xyz + 3xz + 3yz² + 6zk + C, where C is a constant.

To evaluate the integral of ∇f · dr along the given curve C, we substitute the coordinates of the two endpoints of C into f(x, y, z) and calculate the difference.

Coordinates of the starting point of C: (x1, y1, z1) = (3, 0, -1)

Coordinates of the ending point of C: (x2, y2, z2) = (5, 6, 3)

Substituting the coordinates into f(x, y, z):

f(x1, y1, z1) = f(3, 0, -1)

f(x2, y2, z2) = f(5, 6, 3)

The integral of ∇f · dr along C is given by:

∫∇f · dr = f(x2, y2, z2) - f(x1, y1, z1) = f(5, 6, 3) - f(3, 0, -1)

To learn more about integral here:

brainly.com/question/18125359#

#SPJ11

The required answer is = (n/(n+1))theta

theta = (n/(n+1))theta the sample maximum is an unbiased estimator of theta.

One unbiased estimator of theta is the sample maximum, which is defined as max(x1,...,xn). To show that this estimator is unbiased, we need to calculate its expected value and show that it equals theta.

Since x1,...,xn are i.i.d. random variables from the uniform distribution on the interval [0,theta], their probability density function is f(x) = 1/theta for 0 <= x <= theta and 0 otherwise.

The probability that the sample maximum is less than or equal to a given value x is the probability that all n samples are less than or equal to x. Since the samples are i.i.d., this probability is (x/theta)^n.

Therefore, the cumulative distribution function of the sample maximum is F(x) = (x/theta)^n for 0 <= x <= theta and 0 otherwise.

The probability density function of the sample maximum is the derivative of its cumulative distribution function, which is f(x) = (n/theta)(x/theta)^(n-1) for 0 <= x <= theta and 0 otherwise.

The expected value of the sample maximum is the integral of x times its probability density function from 0 to theta, which is

E[max(x1,...,xn)] = integral from 0 to theta of x*(n/theta)(x/theta)^(n-1) dx

= (n/theta) integral from 0 to theta of x^n/theta^n dx

= (n/theta) * [x^(n+1)/(n+1)theta^n)]_0^theta

= (n/(n+1))theta
Therefore, the sample maximum is an unbiased estimator of theta.

To find an unbiased estimator of theta, given that x1, ..., xn are i.i.d. random variables from the uniform distribution on the interval [0, theta], follow these steps:

1. Determine the sample maximum: Since the data is from a uniform distribution, the sample maximum (M) can be used as a starting point. M = max(x1, ..., xn).

2. Calculate the expected value of M: The expected value of the sample maximum, E(M), is given by the formula E(M) = n * theta / (n + 1).

3. Find an unbiased estimator: To find an unbiased estimator of theta, we need to adjust the expected value of M so that it equals theta. We can do this by solving for theta in the equation E(M) = theta:

theta = (n + 1) * E(M) / n

4. Replace E(M) with the sample maximum M: Since we are using the sample maximum as our estimator, we can replace E(M) with M in the equation:

theta_hat = (n + 1) * M / n

The unbiased estimator of theta is theta h at = (n + 1) * M / n, where M is the sample maximum and n is the number of i.d. random variables.

To know more about unbiased estimator . Click on the link.

https://brainly.com/question/14368422

#SPJ11

The power series expansion of the function f(x) = sinx. The correct answer is (b) 1-x^2/2 +x^4/24 -x^6/720.

To obtain this answer, we can use the power series expansion formula for sinx, which is given by

sinx = x - x^3/3! + x^5/5! - x^7/7! + ... .

Evaluating the first four terms of this expansion around x=0, we get

sinx = x - x^3/3! + x^5/5! - x^7/7! + ...

= x - (x^3/6) + (x^5/120) - (x^7/5040) + ...

= 1-x^2/2 +x^4/24 -x^6/720 + ...,

which is equivalent to option (b).

Therefore, the first four nonzero terms in the power series expansion of f(x) = sinx about x=0 are 1-x^2/2 +x^4/24 -x^6/720. The correct option is B).

To know more about power series expansion:

https://brainly.com/question/30262936

#SPJ4

Answer:

16.67%

Step-by-step explanation:

[tex]\frac{40}{240}[/tex] × 100 = 16.67%

This causes the integrand to be undefined at x = 7, making the integral improper.

When an integrand has a singularity (a point where the function is not defined) within the interval of integration, the integral is considered improper. In this case, the singularity occurs at x = 7, which is within the interval of integration [7, 8].

This means that the function is not defined at x = 7 and, therefore, the integral cannot be evaluated in the usual way.

To evaluate an improper integral, one must first split the interval of integration into two parts: one part that includes the singularity and another part that does not.

In this case, we can split the interval [7, 8] into two parts: [7, a] and [a, 8], where a is some number greater than 7.

The integral in question is improper because the integrand is not continuous on the interval [7, 8].

Specifically, the function [tex]6/(x - 7)^(3/2)[/tex] has a singularity at x = 7, as the denominator [tex](x - 7)^(3/2)[/tex]becomes zero when x is equal to 7.

This causes the integrand to be undefined at x = 7, making the integral improper.

To learn more about integral, refer below:

https://brainly.com/question/18125359

#SPJ11

Answer: The dimensions of the skating ramp is 324.

Step-by-step explanation: I know people don't like long Answers so I will give you a long one :). The text says "A skating ramp is in shape of a rectangle and has an area of 36 square untied the length of the rectangle is one more than two times". If the ramp is a rectangle then they must have done (9x4=36). But it needs the be triple that so, 9+9+9=27 and 4+4+4=12. Which means 27x12=324 would be the answer.

                                                      :)

In conclusion, the set {0} ∪ {1/n | n∈ℤ} is not an open set.

Explanation:

You are asking whether the set {0} ∪ {1/n | n∈ℤ} is an open set.

Step 1: Define the set
First, let's define the set in question. The set can be written as {0} ∪ {1/n | n∈ℤ, n≠0}, which means the union of two sets: {0} and {1/n | n∈ℤ, n≠0}. The second set contains all the elements of the form 1/n, where n is an integer, and n is not equal to 0.

Step 2: Determine if the set is open
An open set is a set in which for every point x, there exists some ε > 0 such that the open interval (x-ε, x+ε) is entirely contained within the set. Now, let's see if our set meets this criterion.

For any non-zero integer n, the point 1/n is in the set. However, there is no ε > 0 such that the open interval (1/n - ε, 1/n + ε) is entirely contained within the set, since the interval will contain points that are not of the form 1/n. This means that the set is not open, as there is no suitable ε for these points.

Since {0} is a singleton set and singleton sets are always closed, and {1/n | n∈ℤ} is a set of real numbers, the union "{0} u {1/n | n∈ℤ}" is not an open set. This is because it contains points on the boundary (0) as well as points that are not interior points (such as 1 and -1) due to the nature of the set {1/n | n belongs to z}.

In conclusion, the set {0} ∪ {1/n | n∈ℤ} is not an open set.

Know more about the open set click here:

https://brainly.com/question/31480826

#SPJ11

The p-value (0.040) is less than the significance level of 0.05, we reject the null hypothesis that the true average strength is greater than or equal to 100 MPa.

The standard deviation of the compressive strength is a measure of the variation or spread of the compressive strength values around the mean.

Let's denote the sample mean and sample standard deviation of the compressive strength by x-bar and s, respectively.
Then the test statistic is:

t = (x-bar - 100) / (s /√n)

Here, n = sample size (given, n = 10)
Using the given data, the sample mean and standard deviation:

x-bar = (112.3 + 97.0 + 92.7 + 86.0 + 102.0 + 99.2 + 95.8 + 103.5 + 89.0 + 86.7) / 10 = 96.42

s = √(((112.3-94.2)² + (97.0-94.2)² + ... + (86.7-94.2)²) / 9) = 8.26

So, the test statistic,

t = (96.42 - 100) / (8.3 / √10) = - 1.36

The degrees of freedom for the t-distribution is n - 1 = 9. Using a t-table or calculator, we find that the p-value for a one-tailed test (since we are testing for a decrease in strength) with 9 degrees of freedom and a test statistic of -1.36 is approximately 0.040.

Since the p-value (0.040) is less than the significance level of 0.05, we reject the null hypothesis that the true average strength is greater than or equal to 100 MPa. Therefore, there is evidence to suggest that the true average strength is less than 100 MPa.

To know more about standard deviation, visit:

https://brainly.com/question/28528375

#SPJ1

The maximum likelihood estimate of θ is 0.8.

The likelihood function for the sample is:

L(θ) = fY(2.3;θ) x fY(1.9;θ)  x fY(4.6;θ)

      = (2.3 e^(-2.3/theta) / (6 θ theta)) (1.9e^(-1.9/theta) / (6 theta)) (4.6 e^(-4.6/theta) / (6 theta))

Taking the natural logarithm of both sides, we get:

ln(L(θ)) = ln(2.3) - (2.3/θ) - 3ln(θ) - ln(6) + ln(1.9) - (1.9/θ) - 3ln(θ) - ln(6) + ln(4.6) - (4.6/θ) - 3ln(θ) - ln(6) = 3ln(2.3) - (2.3/θ) - 3ln(θ) - ln(6) + 3ln(1.9) - (1.9/θ) - 3ln(θ) - ln(6) + 3ln(4.6) - (4.6/θ) - 3ln(θ) - ln(6)

To find the maximum likelihood estimate of theta, we need to maximize this expression with respect to theta. We can do this by taking the derivative of the expression with respect to theta, setting it to zero, and solving for theta:

d/dθ ln(L(θ)) = (2.3/θ) - (3/θ) + (1.9/θ) - (3/θ) + (4.6/θ) - (3/θ) = 0 Simplifying this expression, we get:

= (2.3/θ) + (1.9/θ) + (4.6/θ)

= (9/theta)

Multiplying both sides by θ, we get:

2.3 + 1.9 + 4.6 = 9θ

Solving for θ , we get:

θ= (2.3 + 1.9 + 4.6) / 9 = 0.8

Therefore, the maximum likelihood estimate of θ is 0.8.

Learn more about the function visit:

https://brainly.com/question/11624077

#SPJ12

The calculated area of the triangle is 60 square cm.

Let the length of the other leg be x cm.

Using the Pythagorean theorem, we have:

17^2 = 15^2 + x^2

Simplifying:

289 = 225 + x^2

Subtracting 225 from both sides:

64 = x^2

Taking the square root of both sides:

x = 8

Therefore, the area of the triangle is:

Area = 1/2 * x * Leg

Substitute the known values in the above equation, so, we have the following representation

Area = (1/2) * 15 * 8 = 60 square cm.

Read more about area at

https://brainly.com/question/24487155

#SPJ1

The sum of the series [tex]\sum_{n=1}^{\infty}a_n[/tex] whose partial sums is sₙ = 4 - 5(0.9)ⁿ is 4.

To calculate the sum of the series whose partial sums are given by sₙ = 4 - 5(0.9)ⁿ, we need to find the limit of the partial sums as n approaches infinity.

First, identify the formula for partial sums sₙ.
The given formula for partial sums is sₙ = 4 - 5(0.9)ⁿ.

Now, find the limit of the partial sums as n approaches infinity.
As n approaches infinity, we want to find the limit of the partial sums:
[tex]\lim_{n \to \infty}[/tex] [4 - 5(0.9)ⁿ].

Now, identify the behavior of the terms as n approaches infinity.
As n approaches infinity, (0.9)ⁿ approaches 0 since 0.9 is between 0 and 1.

Therefore, the second term in the formula (5(0.9)ⁿ) approaches 0.

Substitute the limiting behavior of the terms and simplify.
[tex]\lim_{n \to \infty}[/tex] [4 - 5(0.9)ⁿ] = 4 - 5(0)

Now, calculate the final value.
4 - 5(0) = 4

Thus, the sum of the series is 4.

Learn more about a series:

https://brainly.com/question/24643676

#SPJ11

The population increases the fastest when the population is half of the carrying capacity, which is 2250.

The Gompertz equation is a mathematical model used to describe population growth. It takes into account the carrying capacity of the environment, which is the maximum number of individuals that can be sustained by the available resources. The equation is P′(t)=0.7ln(P(t)(4500​)/P(t)), where P(t) is the population at time t, and P′(t) is the rate of change of population at time t.

To find when the population increases the fastest, we need to find the value of P that maximizes P′(t). Taking the derivative of P′(t) concerning P and setting it to zero, we get P=4500/e. This means that the population increases the fastest when P=2250, which is half of the carrying capacity.

Intuitively, this makes sense because when the population is small, fewer individuals are competing for resources, which leads to faster growth. As the population approaches the carrying capacity, resources become scarce, which slows down the growth rate. Therefore, the population grows the fastest when it is halfway between the initial population and the carrying capacity.

To learn more about the Gompertz equation, visit:

https://brainly.com/question/18175560

#SPJ11

The prediction we can make is that there were about 169 principals in attendance at the conference. The answer is D.

A type of ratio known as proportions describes the size of one segment of a group in relation to the size of the group as a whole, or population.

If 80 people represent a certain percentage of the total attendance, then we can use that same percentage to estimate the number of principals in attendance. Specifically:

percentage of principals in exhibit room = 15/80 = 0.1875

percentage of total attendance in exhibit room = 80/900 = 0.0889

If we assume that the percentage of principals in the exhibit room is similar to the percentage of principals in the entire conference, then we can set up the following proportion:

0.1875 / x = 0.0889 / 900

where x represents the total number of principals in attendance.

here, Solve for x, then:

x = 169

Therefore, the prediction we can make is that there were about 169 principals in attendance at the conference. The answer is D.

To know more about proportions, visit:

https://brainly.com/question/870035

#SPJ1

The two plumbers will charge the same amount of money when the number of hours (h) is 5.

Let's denote the number of hours as "h".

The total cost charged by Plumber A is given by:

Cost_A = Callout_A + HourlyRate_A * h where Callout_A is the callout fee charged by Plumber A ($30) and HourlyRate_A is the hourly rate charged by Plumber A ($18/hour).

The total cost charged by Plumber B is given by:

Cost_B = Callout_B + HourlyRate_B * h where Callout_B is the callout fee charged by Plumber B ($45) and HourlyRate_B is the hourly rate charged by Plumber B ($15/hour).

We want to find the number of hours (h) when the total cost charged by Plumber A is equal to the total cost charged by Plumber B.

Setting Cost_A equal to Cost_B and solving for h:

Callout_A + HourlyRate_A * h = Callout_B + HourlyRate_B * h

Substituting the given values:

30 + 18 * h = 45 + 15 * h

Subtracting 15 * h from both sides:

30 + 3 * h = 45

Subtracting 30 from both sides:

3 * h = 15

Dividing both sides by 3:

h = 5.

Answered question "Plumber A charges $30 for the callout and $18 hour Plumber B charges $45 for the callout and $15 per hour. Find the number of hours when the two plumbers charge the same amount of money.

Read more about charges

brainly.com/question/25923373

#SPJ1

Jenny paid $176 for 22 T-shirts, which is $8 per T-shirt .

The unitary method, commonly referred to as the unit rate or the single quantity method, is a mathematical approach for resolving issues requiring proportional connections between numbers. Finding the value of one unit of a quantity, which is frequently used as a reference or a benchmark, and utilising that value to compute or compare other numbers are both involved in this process.

In other words, you may compute the value or rate of one unit of a quantity using the unitary technique, and then use that rate to derive the value or rate of another quantity. This approach is frequently employed in a variety of real-world contexts, including the computation of costs, rates, ratios, and proportions.

Given:

Jenny paid $176 for 22 T-shirts.

To find the cost per T-shirt, we need to divide the total cost by the number of T-shirts.

Using Unitary method;

$176 ÷ 22 = $8 per T-shirt.

Therefore, D is correct statement: Jenny paid $176 for 22 T-shirts, which is $8 per T-shirt .

Learn more about Unitary method here:

https://brainly.com/question/22056199

#SPJ1

Correct Question:

Jenny is in charge of ordering T-shirts for the math club at her school. If she paid $176 for 22 T-shirts, which of the following statements is true?

A. Jenny paid $176 for 22 T-shirts, which is $20 per T-shirt.

B. Jenny paid $176 for 22 T-shirts, which is $11 per T-shirt.

C. Jenny paid $176 for 22 T-shirts, which is $12 per T-shirt.

D. Jenny paid$176 for 22 T-shirts, which is $8 per T-shirt.

The impulse response (b) hy(t) = cos(2t)u(t) corresponds to a stable LTI system. Option b is correct.

An LTI (Linear Time-Invariant) system is stable if and only if its impulse response h(t) is absolutely integrable, i.e., the integral of the absolute value of the impulse response over all time is finite:

For impulse response (a), hi(t) = e^-(1-2)t u(t), we can compute the integral of its absolute value:

Since the integral is finite, this impulse response corresponds to a stable LTI system. For impulse response (c), h(t) = 8δ(-21), where δ(t) is the Dirac delta function, the integral of the absolute value is:

Since the integral is finite, this impulse response also corresponds to a stable LTI system. For impulse response (b), hy(t) = cos(2t)u(t), we can compute the integral of its absolute value:

Since the integral is infinite, this impulse response does not correspond to a stable LTI system. Hence Option b is correct.

To learn more about LTI (Linear Time-Invariant) system, here

https://brainly.com/question/15240548

#SPJ4

Using the squeeze theorem, we can conclude that the sequence an must also converge to 6 as n approaches infinity. Therefore, the limit of the sequence is 6.

For more such question on squeeze theorem

https://brainly.com/question/30277782

#SPJ11

The area of the shaded region is 7.63 m².

The area of the shaded region is calculated as follows;

area of the shaded region = area of circle - area of quadrilateral

The diameter of the circle is calculated as follows;

d² = 3² + 4²

d² = 25

d = √ (25)

d = 5

The radius of the circle = 5/2 = 2.5 m

Area of the circle = πr² = π (2.5)² = 19.63 m²

Area of shaded region = 19.63 m² - (3 m x 4 m) = 7.63 m²

Learn more about area of shaded region here: https://brainly.com/question/14989383

#SPJ1

It will take 150 minutes for Mitchell to lap Jane's car, if they start together at same point.

Displacement refers to the distance and direction of an object's change in position from its starting point to its final position. It has both magnitude and direction because it is a vector quantity.  

Displacement is different from distance, which refers to the total path covered by an object, regardless of its starting and ending positions.

Mitchell completes a lap in 25 minutes, which means that he completes 1/25th of the lap in one minute. Similarly, Jane completes 1/30th of the lap in one minute.

Let's assume that they start together at the same point and that Mitchell overtakes Jane after t minutes.

During this time t, Mitchell would have completed t/25th of the lap and Jane would have completed t/30th of the lap. We know that Mitchell overtakes Jane when he completes one full lap more than Jane.

Therefore, we can set up an equation:

t/25 - t/30 = 1

Simplifying this equation, we get:

6t/150 - 5t/150 = 1

t/150 = 1

t = 150

To know more about Displacement, visit:

https://brainly.com/question/30087445

#SPJ1

The marginal rate of technical substitution between x2 and x1 is -1/3.

a. The expression for the marginal product of x1 at the point (x1, x2) is derived by taking the partial derivative of the production function f(x1, x2) with respect to x1:

MP_x1 = ∂(x1^1/2 * x2^3/2) / ∂x1 = (1/2) * x1^(-1/2) * x2^(3/2)

b. The marginal product of x1 does not increase for small increases in x1, holding x2 fixed. This is because the exponent of x1 in the marginal product expression is negative (-1/2), which means that as x1 increases, the marginal product of x1 will decrease.

c. An increase in the amount of x2 will increase the marginal product of x1. This can be observed in the marginal product expression for x1: as x2 increases (given x2^(3/2)), the value of MP_x1 will also increase.

d. The marginal rate of technical substitution (MRTS) between x2 and x1 is the ratio of the marginal product of x1 to the marginal product of x2:

First, calculate the marginal product of x2:
MP_ x2= ∂(x1^1/2 * x2^3/2) / ∂x2 = x1^(1/2) * (3/2) * x2^(1/2)

Then, calculate the MRTS:
MRTS = - (MP_x1 / MP_x2) = - [(1/2) * x1^(-1/2) * x2^(3/2)] / [x1^(1/2) * (3/2) * x2^(1/2)] = - (1/3)

Therefore ,the marginal rate of technical substitution between x2 and x1 is -1/3.

To know more about marginal rate refer here:

https://brainly.com/question/30777627

#SPJ11

The period of this pendulum if it is placed in a truck that is accelerating horizontally at 8.00 m/s^2 is 4.43 s.

The period of a simple pendulum is given by:

T = 2π√(L/g),

where L is the length of the pendulum and g is the acceleration due to gravity.

(a) When the pendulum is located in an elevator accelerating upward at 8.00 m/s^2, the effective acceleration acting on the pendulum will be:

a_eff = g + a_elevator = g + 8.00 m/s^2

So, the new period T' of the pendulum can be found using the formula:

T' = 2π√(L/a_eff)

T' = 2π√(7.00 m / (9.81 m/s^2 + 8.00 m/s^2))

T' = 2.10 s

Therefore, the period of small oscillations for this pendulum if it is located in an elevator accelerating upward at 8.00 m/s2 is 2.10 s.

(b) When the pendulum is located in an elevator accelerating downward at 8.00 m/s^2, the effective acceleration acting on the pendulum will be:

a_eff = g - a_elevator = g - 8.00 m/s^2

So, the new period T' of the pendulum can be found using the formula:

T' = 2π√(L/a_eff)

T' = 2π√(7.00 m / (9.81 m/s^2 - 8.00 m/s^2))

T' = 0.42 s

Therefore, the period of small oscillations for this pendulum if it is located in an elevator accelerating downward at 8.00 m/s^2 is 0.42 s.

(c) When the pendulum is placed in a truck that is accelerating horizontally at 8.00 m/s^2, this will not affect the period of the pendulum because the acceleration is perpendicular to the direction of the pendulum's oscillations. Therefore, the period of the pendulum in this case will be the same as when it is at rest:

T = 2π√(L/g)

T = 2π√(7.00 m / 9.81 m/s^2)

T = 4.43 s

Therefore, the period of this pendulum if it is placed in a truck that is accelerating horizontally at 8.00 m/s^2 is 4.43 s.

To learn more about pendulum visit:

https://brainly.com/question/14759840

#SPJ11

The region in the plane consists of all points with polar coordinates (r,θ) such that 0 ≤ r < 7 and π ≤ θ ≤ 3π/2 is the shaded region in the fourth quadrant bounded by the circle with radius 7 and the positive x-axis extended to the origin.

In polar coordinates, a point in the plane is represented by its distance from the origin (r) and the angle it makes with the positive x-axis (θ). The given conditions are 0 ≤ r < 7 and π ≤ θ ≤ 3π/2.

The condition 0 ≤ r < 7 means that the points must be inside the circle of radius 7 centered at the origin. The condition π ≤ θ ≤ 3π/2 means that the points must be in the fourth quadrant and lie between the angles π and 3π/2 measured from the positive x-axis.

Therefore, the shaded region in the fourth quadrant bounded by the circle with radius 7 and the positive x-axis extended to the origin is the region in the plane consisting of all points with polar coordinates (r,θ) such that 0 ≤ r < 7 and π ≤ θ ≤ 3π/2.

To learn more about polar coordinates, here

https://brainly.com/question/11657509
#SPJ4

Using the compounding calculator we know that after 9 years the amount left to return will be $6,607.

Compound interest, also known as interest on principal and interest, is the practice of adding interest to the principal amount of a loan or deposit.

It occurs when interest is reinvested, or added to the loaned capital rather than paid out, or when the borrower is required to pay it so that interest is generated the next period on the principal amount plus any accumulated interest.

In finance and economics, compound interest is common.

So, the loan is $2000.

The loan rate is 13.5% compounding quarterly.

Time is of full 9 years.

Then, the amount to be paid after 9 years will be:

(Refer to the compounding chart below)

$6,606.76

Rounding off: $6,607

Therefore, using the compounding calculator we know that after 9 years the amount left to return will be $6,607.

Know more about Compound interest here:

https://brainly.com/question/28020457

#SPJ1

If selling price (SP) is Rs 200 and profit percent is 10%, proportionately, the cost price (CP) is Rs. 181.82.

The cost price can be determined using proportions.

Proportion refers to the equation of two or more ratios.

In this situation, we known that the selling price is always equal to the cost price plus the profit margin.

Using percentages, which are proportional representations, the selling price will be equal to 110%, which is equal to the cost price (100%) plus the the profit margin (10%).

Selling price = Rs. 200

Profit percentage = 10%

Cost price = 100%

Selling price = 110% (100% + 10%)

Proportionately, the Cost price will be Rs. 181.82 (Rs. 200 ÷ 110%)

Learn more about proportions at https://brainly.com/question/870035.

#SPJ1

The expected value of the function 3x + 2y, given a valid joint discrete distribution, can be calculated using the properties of expected values.

The expected value of a function of two discrete random variables x and y, denoted as E(3x + 2y), is the sum of the products of the possible values of x and y, weighted by their respective probabilities, in accordance with the joint distribution. Mathematically, it can be expressed as:

E(3x + 2y) = Σ[ (3x + 2y) × P(x, y) ]

where Σ denotes the sum over all possible values of x and y, and P(x, y) represents the joint probability of x and y.

To calculate the expected value, follow these steps:

Identify the possible values of x and y from the given joint discrete distribution.

Compute the joint probability P(x, y) for each combination of x and y using the provided distribution.

Multiply each value of x by 3, and each value of y by 2.

Multiply the result of step 3 by the corresponding joint probability P(x, y) from step 2.

Sum up all the products obtained in step 4 to get the final expected value.

Therefore, the expected value E(3x + 2y) can be found by performing the above steps and summing the resulting products, in accordance with the provided joint discrete distribution.

To learn more about discrete distribution here:

brainly.com/question/31197941#

#SPJ11