Can somebody answer this

Carbon dioxide is the planet's most important greenhouse gas because it both absorbs and radiates heat.

The main cause of global warming is CO2, which is created by human activity.Its atmospheric concentration increased by 48% by 2020 compared to pre-industrial levels (before 1750).Human activities can produce smaller amounts of other greenhouse gases.

A greenhouse gas is carbon dioxide (CO2).As a result, the interior becomes warmer and the effect is similar to that of a greenhouse's glass.This impact is crucial since without the Carbon dioxide that really is present in the atmosphere naturally, Earth may be too chilly for life to exist on it.

To know more about climate change visit:

https://brainly.com/question/28779953

#SPJ4

Answer:

E = 0.0096 N/C

Explanation:

E = I/σπr²

I = 40 mA = 0.04A

σ silver = 6.29X10⁷ /Ωm

r = 0.29 mm/2 = 0.145 mm = 1.45x10⁻⁴ m

E = 0.04A / (6.29X10⁷ /Ωm)(π)(1.45x10⁻⁴ m)² = 0.0096 N/C

*sorry, don't have time to calculate electron drift velocity for you!

Answer: 31 N

Explanation:

Forces in the y-direction (Fn and Fg) are balanced. (ΣFy = 0)

ΣFx = Fa- Ff = 37N - 6N = 31N

All electromagnetic waves travel at the same speed in a vacuum, which is 300,000 km/sec (186,000 mph). This results from the electromagnetic waves' oscillating nature.

In general, we say that light moves in waves and that all electromagnetic radiation moves through a vacuum at a speed of around 3.0 * 108 meters per second. Nothing can move faster than the speed of light, which is what we refer to as.

The universal scientific constant known as c—the speed of light in a vacuum—is significant in many branches of physics. The exact value of the speed of light, c, is 299,792,458 meters per second.

To know more about electromagnetic waves visit:-'

https://brainly.com/question/3101711

#SPJ4

The number of ejected electrons in a photoelectric effect experiment can be calculated using the following formula:

What are electrons?

An electron is a subatomic particle that has a negative electric charge. It is one of the fundamental building blocks of matter, along with the proton and neutron. Electrons are found in the outermost region of an atom, called the electron cloud or electron shell.

number of ejected electrons = intensity of light * time of exposure

where intensity of light is the intensity of the light beam (usually measured in watts per square meter), and time of exposure is the length of time that the light beam is shone on the metal surface.

Alternatively, the number of ejected electrons can be calculated using the following formula:

number of ejected electrons = current * time of exposure

where current is the current flowing through the circuit (usually measured in amperes), and time of exposure is the length of time that the light beam is shone on the metal surface.

Therefore, the number of ejected electrons is proportional to the intensity of the light beam and the length of time that it is shone on the metal surface.

To learn more about electrons from the given link:

https://brainly.com/question/26084288

#SPJ4

it stop flies from sitting on the food

Voltage divided by current equals resistance (R=VI R = V I). Ohm's Law (E = IR) is as basic to electronics students as Einstein's Relativity equation (E = mc2) is to physicists.

When written down, voltage = current x resistance, or volts = amps x ohms, or V = A x. According to Ohm's law, the current flowing through a conductor between two places is proportional to the voltage across the two points. According to Ohm's law, the current flowing through a conductor between two places is proportional to the voltage across the two points. The formula for Ohm's law is V I. As a result, V = RI, where R is a constant known as resistance.

Learn more about voltage here-

https://brainly.com/question/13396105

#SPJ4

The plot of v²kin versus d, where, v is the velocity of motion and d is the distance travelled, is a graph of a quadratic equation, which is a parabola. The correct option is 1 a.

1 a, Parabola

A quadratic equation is an equation of the form a·x² + b·x + c = 0, which is an algebraic equation with a second degree of x.

The motion of a body in free fall can be described using the following equation;

v² = u² - 2·g·h

d = u·t - 0.5·g·t²

Therefore; v² = 0² - 2·g·d = 2·g·d

v² = 2·g·d

d = v²/(2·g)

Where; g = The acceleration due to gravity ≈ 9.8 m/s²

Therefore; d ≈ v²/(2 × 9.8)

The above equation is a quadratic equation, and the graph of the equation, which is a graph of a quadratic equation is parabolic.

Please find attached the graph of v²/(2×9.81) to d, creates with MS Excel

From the shape of the graph and the function of the graph, the graph is a parabola

Learn more about quadratic equation here:

https://brainly.com/question/776122

#SPJ1

Answer:

is constant

Explanation:

When an object is moving with uniform circular motion, the object’s tangential speed is constant.

The expression for gravitational force was represented by the equation F, G, m1, m2, and r2.

The product of such gravitational constant as well as the masses of something like the two objects, multiplied with the square root of their distance, would be the expression for the gravitational force separating two objects.

The formula is given as:

force = (product of g, m (mass) ) / square of the d between both the objects.(r)

F = (G(gravitational force) × M × m) / r²

where,

Force = F

Gravitational Constant = G

Mass of one object = M

Mass of another object = m

Distance = r

Gravitational force seems to be the force used by the planet to pull an item toward it. Issacs Newton made the discovery after seeing an apple drop from of a tree.

To know more about Gravitational Force:

brainly.com/question/1633884

#SPJ4

Gravity can best be described as A: "the tendency of masses to move towards each other".

Gravity is the force through which a planet or any other body draws objects toward its center. Gravity keeps all planets in an orbit around the sun. It means that gravity is a force of attraction between objects or bodies that occurs because of their mass. Gravity becomes stronger as mass is increased, and it becomes weaker as the distance between the objects is increased.

Thus, gravity is best defined as the tendency of masses of objects that keeps them moving toward each other.

You can learn more about gravity at

https://brainly.com/question/940770

#SPJ4

The picture and the pre-image are consistent ONLY when the scale factor is 1.

A sort of transformation known as a dilatation enlarges or shrinks a figure (referred to as the preimage) to produce a new figure (called the image). How much larger or smaller the dilation image will be in comparison to the preimage depends on the scale factor, r.

The scale factor and the center of dilation are used to determine the dilation transformation. The image stretches if the scaling factor is greater than 1.

To know more about pre-image visit:-

https://brainly.com/question/1809747

#SPJ4

The acceleration of the car can be obtained as  0.26 m/s^2. The force required to ove it a distance of 30 m is 11760 N.

We know that the acceleration is the change in the velocity of the object with time. Now we know from the Newton law that the force is the product of the mass of the object and the acceleration.

Now we have that;

weight = mass * acceleration due to gravity

mass = weight/ acceleration due to gravity

mass = 12,000 N / 10 m/s^2

= 1200 Kg

The we know that;

Force = mass * acceleration

acceleration = Force/mass

=  310 N/1200 Kg

= 0.26 m/s^2

For the force that that is needed to move the car a distance of 30 m we have;

F = ma

= 1200 Kg * 9.8 m/s^2

= 11760 N

This is the force that ca move the object forward.

Learn more about distance:https://brainly.com/question/13034462

#SPJ1

The student should choose accelerometer and force sensor for the determination of the inertial mass of the block.

Inertia can be define as the tendency of an object to resist acceleration or we can say tendency of an object to change its state of motion. Inertial Mass is therefore a measure of an object's inertia.

We can also say that inertial mass measures the tendency to resist change in state of motion. The more mass of an object means, the more it resists acceleration. So, it has more inertia.

An accelerometer is an electronic sensor to measure the acceleration forces on an object. It is used to determine the object’s position in space and also to monitor the object’s movement.

A Force Sensor is a transducer to convert an input mechanical load, weight, tension, compression or pressure into an electrical output signal.

To know more about force sensor here

brainly.com/question/28906632

#SPJ4

When magnesium becomes a 2+ ion its becomes cation that is positive charge.

Due to its 12 protons and membership in group 2 of the periodic table, magnesium possesses two electrons in its outer shell (positive charges)

We know that ionic substances consist of two ions, one of which is a positive cation and the other is a negative anion. For instance, cations and anion are produced when we divide ionic substances into their individual ions.

(a), Breaking of [tex]$\mathrm{MgBr}_2$[/tex] into ions '

[tex]\left.\mathrm{MgBr}_2_(aq) \longrightarrow \mathrm{Mg}_{(\mathrm{aq})}^{2+}+2 \mathrm{Br}_{\left(a q_1\right)}{ }^2\right[/tex]

Cation formula [tex]$=Mg^{2+} (a q)$[/tex]

Anion Formula [tex]$=\mathrm{Br}^{\ominus}(a q)$[/tex]

For more such question on magnesium.

https://brainly.com/question/27798376

#SPJ4

Sliding friction is the resistance that any two items produce as they slide against one another. Kinetic friction is another name for this friction.

The external force is the frictional motion. When the external factor is larger than the pressure of kinetic friction, acceleration happens. When the amount of kinetic friction exceeds the force of the external force, slowing (or stopping) takes place.

When an object slides across a surface, sliding friction is regarded as a resistance to that object's motion. Think of a box that is on the ground. This surface is in close proximity to the floor's surface.

To know more about motion visit :

https://brainly.com/question/22810476

#SPJ4

The new acceleration of the truck  for the same driving force is 21.5  m/s^2.

The definition of force in physics is: The push or pull on a massed object changes its velocity.

An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude. A spring balance can be used to calculate the Force. Newton is the SI unit of force.

Given that: A loaded truck can accelerate at 4.3m/s^2.

It loses its load so that it is only 0.2 as massive.

As force = mass × acceleration, the new acceleration of the truck for same driving force is =  (4.3 ÷ 0. 2) m/s^2

= 21.5  m/s^2

Hence, the new acceleration of the truck is 21.5  m/s^2.

Learn more about force here:

https://brainly.com/question/13191643

#SPJ1

Answer:

Conduction is the answer!!!

Explanation:

(can you try to help me with my most recent questions) ty

The force that the bowl is exerting on a small 1.4 n stone as it slides down is 13.72 n.

To determine the force that the bowl is exerting on the stone as it slides down, you will need to consider the stone's mass, the acceleration of the stone, and Newton's second law of motion.

Newton's second law of motion states that the force acting on an object is equal to the mass of the object times its acceleration. This can be written as:

F = m * a

where F is the force acting on the object, m is the mass of the object, and a is the acceleration of the object.

In this case, the mass of the stone is given as 1.4 n, and the acceleration of the stone is the acceleration due to gravity, which is 9.8 m/s^2.

Plugging in the values, you get:

F = 1.4 n * 9.8 m/s^2

F = 13.72 n

To know more about motion

https://brainly.com/question/13966796

#SPJ4

The greater efficiency achieved with the curved blades of a Pelton wheel is due to the fact that the curved shape of the blades allows them to more effectively capture and use the energy of the water jet.

In a Pelton wheel, water is jetted through a nozzle onto the blades of a turbine, which rotates and converts the energy of the water jet into mechanical work. The shape of the blades plays a significant role in the efficiency of the turbine. Curved blades are more efficient than straight blades because they can capture and use more of the kinetic energy of the water jet.

The curved shape of the blades creates a more efficient flow of water over the surface of the blade, which allows the blade to extract more energy from the water jet. This results in a higher torque and power output from the turbine, leading to a more efficient conversion of water energy into mechanical work.

Learn more about Pelton Wheel here:

https://brainly.com/question/20038787

#SPJ4

According to the Newtons third law of motion, the collision between the bumper car and the rider will affect both of them as both the systems have mass and are moving with certain velocities.

Collision is a case where one moving object or person violently collides with another.

The law of interaction or the Newton's third law of motion, says that if one body exerts a force on a second body, the second body exerts a force equal in magnitude and opposite in direction on the first body.

As we know momentum is P = m*v i.e. momentum (P) is directly proportional to the mass and velocity.

Heavier bodies have more mass, therefore have more momentum.

here, the bumper car is the heavy system and hence, it will exerts more impact on the rider.

To know more about collision,

https://brainly.com/question/7593984

#SPJ4

The cross-sections of metal beams in the shape of the letter I instead of solid rectangles because I beam is used horizontally, the stress is more at the top and in the bottom, and the middle is a stress free region.

Any cross section of the beam experiences bending and shearing stresses as a result of forces and couplings operating on it.

In an I beam, high weights can be carried while weighing less than in a rectangular beam.

The cross sections of metal beams are in the shape of letter I instead of solid rectangles to reduce the weight of the beam while preserving the resistance to bending.

To know more about beams:

https://brainly.com/question/28232038

#SPJ4

The final pressure of the gas is 3atm.

As given in the question,

The volume of the gas at point 1  ( [tex]V_1[/tex]) is 1000 [tex]cm^3[/tex]

The volume of the gas at point 2 ( [tex]V_2[/tex]) is 3000[tex]cm^3[/tex]

The pressure of the gas ([tex]P_2[/tex]) is 1 atm

For an isothermal process , the temperature of the system remains constant so,

The formula to find the pressure of the gas is

   [tex]P_1V_1=P_2V_2[/tex]                                                                      ----(1)

Where

[tex]V_1[/tex] is the volume of the gas at point 1

[tex]V_2[/tex] is the volume of the gas at point 2

[tex]P_1[/tex] is the pressure of the gas at point 1

[tex]P_2[/tex] is the pressure of the gas at point2

now substitute the values given in the question in the equation (1),

[tex]P_1V_1=P_2V_2\\P_1 =\frac{ P_2V_2}{V_1}[/tex]

=>[tex]P_1[/tex] = [tex]\frac{1\times 3\times10^{-3} }{1\times 10^{-3} }[/tex]

=> [tex]P_1[/tex] = 3

Pressure is 3 atm

To learn more about Isothermal compression:

https://brainly.com/question/27476852

#SPJ4

Answer:

1.Opening and shutting a door

2.Squeezing water out of wet clothes

3.Punching a pillow

4.Stomping your foot

5.Pushing a manual mower

6.Ripping a piece of paper

7.Crushing a ball of dough

8.Pulling out an ingrown hair from your leg

9.Pulling a light chain

10.Smacking a horses butt to signal it to "GIDDIE UP!"

Explanation:

If the net force on an object is zero, it will slide down an inclined plane at a constant velocity. This knowledge can be used to calculate the coefficient of kinetic friction between two objects.

The kinetic friction on a slope is denoted as f k = k m g cos. The change in velocity (v) over the change in time (t) is expressed by the equation a = v/t. This enables you to calculate how quickly velocity varies in meters per second squared (m/s2). The coefficient of friction (fr) is a quantity that represents the ratio of the frictional resistive force (Fr) divided by the normal or perpendicular force (N) pushing the objects together.

Learn more about velocity here-

https://brainly.com/question/18084516

#SPJ4

Answer:

Your answer is (c) the force associated with molecular motion

Explanation:

Hope this helps :D

(1) The initial velocity in the y-direction is 9.64 m/s.

(2) The final velocity in the x-direction is 11.5 m/s.

(3)  The range, xb, of the ball is 22.6 m.

(4) The maximum height reached by the ball is 4.74 m.

The initial vertical component of the velocity is calculated using the following kinematic equation.

Vy = V sinθ

where;

Vy = V sinθ

Vy = ( 15 m/s ) x ( sin 40 )

Vy = 9.64 m/s

The final velocity in the x-direction is calculated as follows;

Vₓf = Vxi = V cosθ

where;

Vₓf  = ( 15 m/s ) x ( cos 40 )

Vₓf  = 11.5 m/s

The range of the ball is calculated as follows;

R = v² sin (2θ) / g

R = ( 15² sin (2 x 40) ) / 9.8

R = 22.6 m

The maximum height reached by the ball is calculated as;

H = v² sin²θ / 2g

H = ( 15² x ( sin 40 )² ) / (2 x 9.8)

H = 4.74 m

Learn more about maximum height of projectile here: https://brainly.com/question/12870645

#SPJ1