calculate the ph of a solution containing a. 20 ml of 0.001 m hcl and 50 ml of 2.5 m sodium acetate. give the answer in two sig figs.

Heat added (wood) = 88.7 g x 0.10 cal/g°C x 37°C = 327.19 cal.

Heat added (brick) = 88.7 g x 0.20 cal/g°C x 37°C = 654.38 cal.

To calculate the amount of heat added to warm 61.8 g of ethanol from 20.6°C to 54.8°C, use the formula:

Heat added (cal) = mass (g) x specific heat (cal/g°C) x change in temperature (°C)

For ethanol, the specific heat is 0.58 cal/g°C. The change in temperature is 54.8°C - 20.6°C = 34.2°C.

Heat added = 61.8 g x 0.58 cal/g°C x 34.2°C = 1221.36 cal.

To find the heat added to warm 88.7 g of wood and 88.7 g of brick from 18.9°C to 55.9°C, use the same formula. For wood, specific heat is 0.10 cal/g°C; for brick, it's 0.20 cal/g°C. The change in temperature is 55.9°C - 18.9°C = 37°C.

To know more about specific heat click on below link:

https://brainly.com/question/11297584#

#SPJ11

Fe3+ cannot oxidize I- to I2 under standard-state conditions.

Under standard-state conditions, Fe3+ has a standard reduction potential of +0.77 V, while I- has a standard reduction potential of -0.54 V. Since the reduction potential of Fe3+ is greater than that of I-, Fe3+ has a greater tendency to be reduced than I-.

To explain further, for a redox reaction to occur, the reducing agent must have a higher reduction potential than the oxidizing agent. In this case, Fe3+ is the oxidizing agent and I- is the reducing agent. However, since the reduction potential of Fe3+ is higher than that of I-, Fe3+ cannot oxidize I- to I2.

For more such questions on Oxidize.

https://brainly.com/question/14056062#

#SPJ11

The common name for the given compound NH₂CH₃ is methylamine.

Methylamine (NH₂CH₃) is an organic compound that belongs to the amine class of compounds. It consists of a methyl group (CH₃) attached to an amine group (NH₂). Methylamine is a colorless gas at room temperature and has a strong odor similar to ammonia.

It is used in various industrial applications, such as the production of pharmaceuticals, pesticides, and solvents. It can be synthesized by reacting methanol with ammonia under high pressure and temperature in the presence of a catalyst.

Due to its basic properties, methylamine can also form salts with various acids, such as hydrochloric acid, which yields methylammonium chloride.

To know more about pharmaceuticals click on below link:

https://brainly.com/question/30134373#

#SPJ11

It is unlikely to see an α-helix containing only Arg, Lys, Met, Phe, Trp, Tyr, and Val, due to the unfavorable interactions and steric hindrance caused by the combination of charged and bulky side chains.

An α-helix is a common secondary structure found in proteins, where a single polypeptide chain coils into a right-handed helix. The helix is stabilized by hydrogen bonds between the carbonyl group of one amino acid residue and the amide group of an amino acid residue four residues away.

Arginine (Arg) and lysine (Lys) are positively charged amino acids with bulky side chains, while methionine (Met), phenylalanine (Phe), tryptophan (Trp), tyrosine (Tyr), and valine (Val) are nonpolar amino acids.

The bulky and charged side chains of Arg and Lys would create steric hindrance and repulsion within the helix, making it difficult to form and stabilize the helical structure. The presence of multiple bulky and charged residues in close proximity could also disrupt the hydrogen bonding between the amino acid residues, further destabilizing the helix.

learn more about protein here:

https://brainly.com/question/30434429

#SPJ11

The solubility of AgCl in a 0.154 M NaCl solution is approximately 1.17 x 10⁻⁹ M.

The solubility of AgCl in a 0.154 M NaCl solution can be determined using the Ksp value and the common ion effect. Given the Ksp of AgCl is 1.8 x 10⁻¹⁰, we can write the solubility product expression as:

Ksp = [Ag+][Cl-]

Since NaCl is a strong electrolyte, it dissociates completely in solution, providing a [Cl-] of 0.154 M. Let the solubility of AgCl be represented by 'x'. Thus, the concentration of Ag+ in the solution is 'x'. Considering the common ion effect, the expression becomes:
1.8 x 10⁻¹⁰ = x(0.154)

Solving for x:
x = (1.8 x 10^-10) / 0.154 ≈ 1.17 x 10⁻⁹ M

Learn more about  ion effect at https://brainly.com/question/28299781

#SPJ11

The following equation can be used to depict the dissociation of hydrofluoric acid, HF: HF + [tex]H_{2}O[/tex] → [tex]H_{3}O^{+}[/tex] + [tex]F^{-}[/tex]

The equilibrium constant of an acid's dissociation reaction or when an acid dissociates is known as or called the acid dissociation constant, or Ka. The strength of an acid in a solution is numerically represented or estimated by this equilibrium constant.

We shall first ascertain the pKa of the solution before calculating the Ka. The pH of the solution and the pKa of the solution are equal at the equivalence point. As a result, we can rapidly calculate the value of Ka using a titration curve and the equation Ka = - log pKa.

To learn more about equilibrium constant visit:

brainly.com/question/10038290

#SPJ1

The value of Ka for hydrofluoric acid , HF , is 7.20×10-4. Write the equation for the reaction that goes with this equilibrium constant.

(Use H3O+ instead of H+.)

1.43 g of solid sodium acetate is required to prepare a buffer solution with a pH of 4 when mixed with 100.0 ml of 0.1 M acetic acid.

To prepare a buffer of pH 4, we need to use the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

where pH is the desired pH, pKa is the acid dissociation constant of acetic acid, [A-] is the concentration of the acetate ion, and [HA] is the concentration of undissociated acetic acid.

Rearranging the equation gives:

[A-]/[HA] = 10[tex]^(pH - pKa)[/tex]

Substituting the values:

[A-]/[HA] = 10(4 - (-log10(1.8⋅10⁻⁵))) = 1.74

The ratio of [A-]/[HA] is equal to the ratio of their masses, so we can use this ratio to calculate the mass of solid sodium acetate required to prepare the buffer.

The molar mass of sodium acetate is 82.03 g/mol. We can assume that the volume of the solution remains constant after adding the solid sodium acetate. Therefore, the moles of acetic acid initially present in the solution will be equal to the moles of acetic acid and acetate ion in the buffer solution:

0.1 mol/L x 0.1 L = 0.01 mol acetic acid

Since [A-]/[HA] = 1.74, the concentration of acetate ion is:

[A-] = 1.74 x [HA] = 1.74 x 0.1 M = 0.174 M

The moles of acetate ion required in the buffer solution can be calculated as:

moles of acetate ion = [A-] x volume of buffer solution

= 0.174 M x 0.1 L

= 0.0174 mol

The mass of sodium acetate required can be calculated as:

mass = moles x molar mass

= 0.0174 mol x 82.03 g/mol

= 1.43 g

Therefore, 1.43 g of solid sodium acetate is required to prepare a buffer solution with a pH of 4 when mixed with 100.0 ml of 0.1 M acetic acid.

Learn more about sodium acetate ,

https://brainly.com/question/12924347

#SPJ4

The result of treating pyrrole with a solution of nitric and sulfuric acids at zero degree temperature is 2-nitropyrrole.

Step 1: Pyrrole protonation:

To create the pyrrole cation, sulfuric acid protonates the pyrrole nitrogen.

Nitric Acid Attack in Step 2:

Nitric acid attacks the pyrrole cation at the 2-position by acting as an electrophile.

Production of the Nitronium Ion in Step 3:

The sulfuric acid subsequently protonates the nitric acid, resulting in the formation of the nitronium ion ([tex]NO^{+} _{2}[/tex]).

Electrophilic Aromatic Substitution, the fourth step:

Being an electrophile, the nitronium ion functions as a replacement at the pyrrole's 2-position.

Deprotonation, at step five:

The ultimate product, 2-nitropyrole, is created when the intermediate is deprotonated by sulfuric acid.

To learn more about reaction mechanism visit:

brainly.com/question/14010810

#SPJ1

In these circumstances, the rate of enzyme activity would be 2.74 units per second. Depending on the exact assay used to evaluate the reaction, the units of enzyme activity will vary.

As an inverse measure of affinity, this is typically written as the enzyme's Km (Michaelis constant). In real life, the substrate concentration at which the enzyme may achieve half of Vmax is known as Km. Consequently, the reaction's Vmax increases as the amount of enzyme increases.

(V = Vmax * [S] / (Km + [S])

where [S] is the concentration of the substrate, [V] is the rate of enzyme activity, [Vmax] is the maximum rate of the enzyme-catalyzed reaction, and [Km] is the Michaelis constant.

Substituting the given values:

V = 96 * 6.2 / (12 + 6.2)

V = 49.92 / 18.2

V ≈ 2.74

To know more about reaction visit:-

https://brainly.com/question/28984750

#SPJ1

The change in entropy for the vaporization of ethanol is approximately 109.8 J/mol·K.

To calculate the change in entropy (ΔS) for the vaporization of ethanol, we will use the formula:
ΔS = ΔHvap / T Where ΔHvap is the enthalpy of vaporization, and T is the temperature in Kelvin.
Given:
ΔHvap = 38.6 kJ/mol
Boiling point = 78.3 °C
First, convert the boiling point to Kelvin:
T = 78.3 + 273.15 = 351.45 K
Now, plug the values into the formula:
ΔS = (38.6 kJ/mol) / (351.45 K)
Since 1 kJ is equal to 1000 J, we need to convert kJ to J:
ΔS = (38.6 * 1000 J/mol) / (351.45 K)
ΔS = 38600 J/mol / 351.45 K
ΔS ≈ 109.8 J/mol·K

To learn more about entropy click here https://brainly.com/question/13999732

#SPJ11

2-methyl propanoic acid and butanoic acid are both structural isomers.

2-methyl propanoic acid and bunaoic acid have the same molecular formula (C₄H₈O₂), but their atoms are arranged differently in their chemical structure. Specifically, 2-methyl propanoic acid has a methyl group (CH₃) attached to the second carbon in the chain, while butanoic acid has a straight carbon chain with no branches. This difference in structure can affect their physical and chemical properties, such as boiling point and reactivity.

Learn more about propanoic acid: https://brainly.com/question/28494966

#SPJ11

The concentration of the remaining OH⁻ ions is 0.040 M. When NaOH and HCl react, they form a neutralization reaction, producing water and a salt (NaCl). The balanced chemical equation is:

To find the concentration of the remaining OH- ions, we first need to determine the amount of HCl that reacted with the NaOH.

Using the balanced chemical equation: NaOH + HCl -> NaCl + H2O

We know that 1 mole of NaOH reacts with 1 mole of HCl to form 1 mole of water.

Therefore, the amount of HCl that reacted with the NaOH is:

0.200 moles/L x 0.0800 L = 0.0160 moles

0.600 moles/L x 0.0200 L = 0.0120 moles

Since HCl and NaOH react in a 1:1 ratio, the limiting reagent is NaOH and 0.0160 moles of NaOH were used in the reaction.

The amount of NaOH that remains is:

0.0200 moles - 0.0160 moles = 0.0040 moles

The total volume of the solution is:

80.0 mL + 20.0 mL = 100.0 mL = 0.1000 L

Therefore, the concentration of the remaining OH- ions is:

0.0040 moles / 0.1000 L = 0.040 M

So the concentration of the remaining OH- ions is 0.040 M.

Learn more about concentration here:

https://brainly.com/question/13872928

#SPJ11

The concentration of SCN⁻ ion in solution S₃ is approximately 1.41 × 10⁻⁴ M.

we assumed that all the SCN⁻ ion was converted to FeSCN²⁺ ion, but in reality, a small amount of SCN⁻ ion must also be present in solution due to the equilibrium shown in Equation (2).

We can use the mean value of K obtained from Part II, which is K = 2.02 × 10¹⁰, to calculate the concentration of SCN⁻ ion in solution S₃. The equilibrium expression for Equation (2) is;

FeSCN²⁺(aq) ⇌ Fe³⁺(aq) + SCN⁻(aq)

At equilibrium, the concentrations of FeSCN²⁺, Fe³⁺, and SCN⁻ are [FeSCN²⁺], [Fe³⁺], and [SCN⁻], respectively. Since the initial concentration of FeSCN²⁺ is negligible compared to the concentration of Fe³⁺, we can assume that the concentration of Fe³⁺ remains essentially constant throughout the reaction, and the equilibrium expression can be simplified to;

K = [Fe³⁺][SCN⁻]/[FeSCN²⁺]

Substituting the given values of [Fe³⁺] and K into the above equation gives;

2.02 × 10¹⁰ = [Fe³⁺][SCN⁻]/[FeSCN²⁺]

We can rearrange this equation to solve for [SCN⁻]

[SCN⁻] = (K[FeSCN²⁺])/[Fe³⁺]

We know that the total concentration of SCN⁻ in solution S₃ is the sum of the concentrations of FeSCN²⁺ and SCN⁻. Let's call the concentration of SCN⁻ x. Then;

[SCN⁻] + [FeSCN²⁺] = 5.00 × 10⁻⁴ M

Substituting the expression for [SCN⁻] into the above equation and solving for x gives;

x + [FeSCN²⁺] = 5.00 × 10⁻⁴ M

x + ([Fe³⁺] - x) = 5.00 × 10⁻⁴ M (since [Fe³⁺] = [FeSCN²⁺] + x)

Simplifying this equation gives;

2x = 5.00 × 10⁻⁴ M - [Fe³⁺]

Substituting the given value of [Fe³⁺] into the above equation and solving for x gives;

x = (5.00 × 10⁻⁴ M - 2.18 × 10⁻⁴ M)/2

x = 1.41 × 10⁻⁴ M

To know more about concentration here

https://brainly.com/question/13872928

#SPJ4

The volume of the diluted solution which contains 17.0 g of KNO₃ is approximately 610 mL.

First, we need to find the concentration of the diluted solution.

To do this, we'll use the formula: C₁V₁ = C₂V₂

C₁ = initial concentration (6.6 M)
V₁ = initial volume (50.8 mL)
C₂ = final concentration (unknown)
V₂ = final volume (1.20 L = 1200 mL)

6.6 M × 50.8 mL = C₂ × 1200 mL

After calculating, we find that C₂ (the final concentration) is 0.2755 M.

Next, we need to determine the volume of the diluted solution that contains 17.0 g of KNO₃. We'll use the formula: mass = volume × concentration × molar mass

Molar mass of KNO₃ = 39.1 g/mol (K) + 14.0 g/mol (N) + 3 × 16.0 g/mol (O) = 101.1 g/mol

17.0 g = volume × 0.2755 M × 101.1 g/mol
volume = 0.610 L = 610 mL

Now, we can solve for the volume of the diluted solution that contains 17.0 g of KNO₃. After calculating, the volume is approximately 610 mL.

Learn more about diluted solution here: https://brainly.com/question/27097060

#SPJ11

The co-existence curve s/l, also known as the solid-liquid coexistence curve, represents the phase equilibrium between a solid and a liquid at various temperatures and pressures. The slope of this curve can provide important information about the thermodynamic properties of the system.

Typically, the slope of the co-existence curve s/l is positive, indicating that the melting temperature of the solid increases as pressure increases. However, since you have specified that the substance in question is not water, it is important to consider the specific properties of the material.

The slope of the co-existence curve s/l can depend on factors such as the crystal structure of the solid, the intermolecular forces between the solid and liquid phases, and the molecular size and shape of the substance. For example, some materials may exhibit negative slopes, indicating that the melting temperature decreases as pressure increases.

Therefore, without further information about the substance in question, it is difficult to determine the exact slope of the co-existence curve s/l. It is important to note that the slope can vary significantly between different materials, and can provide valuable insight into their thermodynamic behavior.

to know more about The co-existance curve   click this link-

brainly.com/question/14449559

#SPJ11

Answer:

0.41

Explanation:

-log [.390]

The pH of the solution is 0.41. The pH of the aqueous solution containing 0.390 M HCl at 25.0 °C can be calculated using the formula pH = -log[H+], where [H+] is the concentration of hydrogen ions in the solution. HCl is a strong acid, which means it completely dissociates in water to form H+ and Cl- ions. Therefore, the concentration of H+ ions in the solution is equal to the concentration of HCl, which is 0.390 M.

Using this concentration in the pH formula, we get:

pH = -log(0.390)

pH = 0.41

Therefore, the pH of the aqueous solution containing 0.390 M HCl at 25.0 °C is 0.41.

Learn more about pH here:

https://brainly.com/question/491373

#SPJ11

Since NO2 possesses one unpaired electron on the nitrogen atom, giving it a total of 17 valence electrons, it defies the octet rule.

Because SF4 has 34 valence electrons and each atom contains an entire octet of electrons, it complies with the octet rule.

Because BF3 has 24 valence electrons and each atom contains an entire octet of electrons, it complies with the octet rule.

XeF2, which possesses two unpaired electrons on the xenon atom and a total of 22 valence electrons, defies the octet rule.

Because CO2 has 16 valence electrons and each atom contains an entire octet of electrons, it complies with the octet rule.

Except for hydrogen, which has a complete valence shell with two electrons, atoms often form molecules with complete valence shells of eight electrons each, according to the octet rule. The octet rule can be broken when there are too few valence electrons or when there are more valence electrons than the required eight. The nitrogen atom in NO2 possesses an unpaired electron, resulting in an odd number of valence electrons and an insufficient octet. Two unpaired electrons on the xenon atom in XeF2 result in an incomplete octet. Both SF4 and BF3 have an atom with a fully completed valence shell of eight electrons, which satisfies the octet rule. CO2 has a full octet on it.

learn more about  octet rule here:

https://brainly.com/question/865531

#SPJ11

The equilibrium constant for the given reaction is greater than 1, so K > 1.

The equilibrium constant (K) is a measure of the position of an equilibrium reaction, indicating the relative amounts of reactants and products at equilibrium. It is calculated as the ratio of the products to reactants, each raised to their respective stoichiometric coefficients. In the given reaction, [tex]CH3COO−(aq) + H2O(l) ⇌ CH3COOH(aq) + OH−(aq)[/tex], the products are CH3COOH and OH-, and the reactants are CH3COO- and H2O. Since the reaction involves the production of hydroxide ions, which are the product of the reaction, and the reactants are weak acid and its conjugate base, it is an acid-base reaction. The equilibrium constant (K) for this reaction is greater than 1, indicating that at equilibrium, the products are favored over the reactants.

Learn more about equilibrium constant here:

https://brainly.com/question/10038290

#SPJ11

The solubility of [tex]AgCl[/tex]in a solution that is 0.130 M in [tex]NH3[/tex] is 1.3 × 10⁻⁵ M.

To calculate the solubility of silver chloride ([tex]AgCl[/tex]) in a solution that is 0.130 M in [tex]NH3[/tex], we need to use the following equilibrium reaction:

[tex]AgCl(s)[/tex]+ [tex]2 NH3(aq)[/tex]  ⇌ [tex]Ag(NH3)2+(aq) + Cl-(aq)[/tex]

The equilibrium constant for this reaction is called the formation constant of [tex]Ag(NH3)2[/tex]+ and has a value of Kf = 1.6 × 107.

To solve this problem, we need to use the equation for the formation constant:

[tex]Kf = [Ag(NH3)2+][Cl-]/[AgCl][NH3]2[/tex]

We can rearrange this equation to solve for the solubility of [tex]AgCl[/tex]:

[tex][AgCl] = [Ag(NH3)2+][Cl-]/(Kf[NH3]2)[/tex]

Substituting the values given in the problem, we have:

[[tex]AgCl[/tex]] = (x)(0.130)/(1.6 × 107 × 0.1302)

where x is the concentration of [tex]Ag(NH3)2[/tex]+ and [tex]Cl-[/tex] ions at equilibrium.

Solving for x, we get:

x = 1.3 × 10⁻⁵ M

Therefore, the solubility of [tex]AgCl[/tex]in a solution that is 0.130 M in NH3 is 1.3 × 10⁻⁵ M.

Learn more about solubility

brainly.com/question/28170449

#SPJ11

To draw the unique Lewis isomers for C4H10O, we first need to determine the possible bonding arrangements and molecular shapes for this molecular formula.

C4H10O can have either an alcohol functional group (-OH) or an ether functional group (-O-) attached to a carbon chain.

If C4H10O has an alcohol functional group, it would have the molecular formula C4H10O + 1 (for the added hydrogen). This would result in the molecule being a primary alcohol with the formula CH3CH2CH2CH2OH.

On the other hand, if C4H10O has an ether functional group, it would have the molecular formula C4H10O, and the oxygen atom would be attached to one of the carbon atoms in the chain.

Using these two possibilities, we can draw the following unique Lewis isomers for C4H10O:

1. CH3CH2CH2CH2OH (primary alcohol)
2. CH3CH2CH(OH)CH3 (secondary alcohol)
3. CH3CH(OH)CH2CH3 (secondary alcohol)
4. CH3CH2OCH2CH3 (ether)

These are all the unique Lewis isomers that can be drawn for C4H10O.

To know more about Lewis isomers click here:

https://brainly.com/question/29752342

#SPJ11

The HCl reacts with the fluoride ion (F⁻) present in the buffer solution to maintain the pH of the solution. Option A is correct.

The buffer solution is a mixture of hydrofluoric acid (HF) and its conjugate base, fluoride ion (F⁻), so the HCl will react with the F⁻ ion to maintain the pH of the solution.

The reaction that occurs when HCl is added to the buffer solution is;

HCl + F⁻ → HF + Cl⁻

The HCl reacts with the F⁻ ion to form HF and Cl⁻, which shifts the equilibrium of the buffer solution towards HF. This means that some of the F⁻ ions are converted into HF molecules, which helps to maintain the pH of the solution.

The buffer solution resists changes in pH because it contains a weak acid and its conjugate base, which can react with any added acid or base to prevent large changes in the concentration of H₃O⁺ or OH⁻ ions in the solution.

Hence, B. is the correct option.

To know more about buffer solution here

https://brainly.com/question/30332096

#SPJ4

--The given question is incomplete, the complete question is

"A solution is prepared by dissolving 0.26 mol of hydrofluoric acid and 0.23 mol of sodium fluoride in water sufficient to yield 1.00 L of solution. The addition of 0.05 mol of HCl to this buffer solution causes the pH to drop slightly. The pH does not decrease drastically because the HCl reacts with the ________ present in the buffer solution. The Ka of hydrofluoric acid is 6.8 × 10-4. A) fluoride ion B) H₂O C) hydrofluoric acid D) H₃O⁺"--

To produce a buffer with the highest buffer capacity, you need to combine solutions of citric acid (C6H8O7) and sodium citrate (C6H5Na3O7) with equal concentrations and near their pKa values. Citric acid is a triprotic acid with pKa values of 3.13, 4.76, and 6.40. Sodium citrate is the conjugate base.

When citric acid and sodium citrate are combined in equal volumes, they can form a buffer solution with a specific pH value. The buffer capacity of a buffer solution refers to its ability to resist changes in pH when an acid or a base is added to it. The higher the buffer capacity, the more effective the buffer solution is in maintaining a stable pH.

The pKa value is a measure of the acidity or basicity of a compound. Citric acid has three pKa values, which correspond to the three dissociation steps of the acid. They are 3.1, 4.8, and 6.4. Sodium citrate, on the other hand, has only one pKa value, which is around 7.2.


For the highest buffer capacity, choose the combination closest to the pH you want to maintain. For example, if you want a pH around 4.76, combine equal concentrations of citric acid and sodium citrate with pKa value 4.76. This combination will provide the highest buffer capacity at that specific pH.

To know more about concentrations visit :-

https://brainly.com/question/10725862

#SPJ11

The heat liberated when 88.57 grams of methane are burned is -4,909.2 kJ, or approximately -4,910 kJ (rounded to three significant figures).

To solve this problem, we need to first balance the chemical equation:

CH4 + 2O2 ⟶ CO2 + 2H2OΔH=−890.0kJ

Now, we can use stoichiometry to calculate the amount of heat liberated when 88.57 grams of methane are burned. First, we need to convert the mass of methane to moles:

88.57 g CH4 × (1 mol CH4/16.04 g CH4) = 5.52 mol CH4

Next, we can use the balanced equation to determine the mole ratio between CH4 and ΔH:

1 mol CH4 : -890.0 kJ

So, the heat liberated when 5.52 mol CH4 are burned is:

5.52 mol CH4 × (-890.0 kJ/1 mol CH4) = -4,909.2 kJ

However, the question asks for the heat liberated when 88.57 grams of methane are burned. To convert from moles to grams, we can use the molar mass of CH4:

5.52 mol CH4 × (16.04 g CH4/1 mol CH4) = 88.57 g CH4

For more about heat liberated:

https://brainly.com/question/16557142

#SPJ11

the concentration of hydroxide ions in the solution is:

[OH-] = 1.0 x 10^-14 / [H3O+] = 7.2 x 10^-9 M

the pH of the solution is approximately 2.06.

Hydrocyanic acid is a weak acid, and its dissociation reaction in water is:

HCN + H2O ⇌ H3O+ + CN-

The equilibrium constant for this reaction is the acid dissociation constant (Ka) of hydrocyanic acid, which is 4.9 x 10^-10 at 25°C. To find the hydroxide ion concentration, we need to calculate the concentration of hydronium ions (H3O+), which are formed by the dissociation of hydrocyanic acid.

Let x be the concentration of H3O+ ions that are formed by the dissociation of HCN. Then, the concentration of CN- ions formed is also x. The initial concentration of HCN is 0.499 M, so the concentration of undissociated HCN remaining in solution is (0.499 - x).

Using the equilibrium expression for Ka, we have:

Ka = [H3O+][CN-]/[HCN]

Substituting the expressions for the concentrations in terms of x, we get:

4.9 x 10^-10 = x^2 / (0.499 - x)

Solving for x, we get:

x = 1.4 x 10^-6 M

Therefore, the concentration of hydroxide ions in the solution is:

[OH-] = 1.0 x 10^-14 / [H3O+] = 7.2 x 10^-9 M

For the second part of the question, acetic acid is also a weak acid, and its dissociation reaction in water is:

CH3COOH + H2O ⇌ H3O+ + CH3COO-

The equilibrium constant for this reaction is the acid dissociation constant (Ka) of acetic acid, which is 1.8 x 10^-5 at 25°C. To find the pH of the solution, we need to calculate the concentration of hydronium ions (H3O+), which are formed by the dissociation of acetic acid.

Let x be the concentration of H3O+ ions that are formed by the dissociation of CH3COOH. Then, the concentration of CH3COO- ions formed is also x. The initial concentration of CH3COOH is 0.595 M, so the concentration of undissociated CH3COOH remaining in solution is (0.595 - x).

Using the equilibrium expression for Ka

, we have:

Ka = [H3O+][CH3COO-]/[CH3COOH]

Substituting the expressions for the concentrations in terms of x, we get:

1.8 x 10^-5 = x^2 / (0.595 - x)

Solving for x, we get:

x = 0.0087 M

Therefore, the concentration of hydronium ions (H3O+) in the solution is 0.0087 M. To find the pH, we use the equation:

pH = -log[H3O+]

Substituting the value of [H3O+], we get:

pH = -log(0.0087) = 2.06

Therefore, the pH of the solution is approximately 2.06.

VVisit to know more about pH:-

brainly.com/question/172153

#SPJ11

We can use the relationship between the pH, pOH, and Kb of a weak base:

Kb = (1.0 x 10^-14) / (OH^-)^2

First, we need to find the pOH of the solution, which is:

pOH = 14.00 - pH = 14.00 - 9.42 = 4.58

Next, we can find the concentration of hydroxide ions in the solution using the equation for the dissociation of water:

Kw = [H+][OH-] = 1.0 x 10^-14

[OH-] = Kw / [H+] = 1.0 x 10^-14 / 10^-9.42 = 3.98 x 10^-6 M

Now we can substitute these values into the Kb equation to solve for Kb:

Kb = (1.0 x 10^-14) / (3.98 x 10^-6)^2 = 6.29 x 10^-10

Therefore, the Kb of the unknown weak base is 6.29 x 10^-10.

Visit here to learn more about dissociation brainly.com/question/30961097

#SPJ11

(a) pH = 11.13;

(b) pH = 9.25;

(c) pH = 8.81;

(d) pH = 9.45;

(e) pH = 9.00.

To calculate the pH of each solution, first determine the concentration of NH₃, then find the concentration of NH₄⁺ and OH⁻ ions using equilibrium expressions, and finally calculate the pH using the concentration of OH⁻ ions.


(a) When 40.0 mL of 0.100 M NH₃ is diluted to 20.0 mL, the concentration remains the same (0.100 M). Use Kb (NH₃) to calculate the concentration of OH⁻ ions and then determine pH.

(b)-(e) When mixing NH₃ with HCl or NH4Cl, first calculate the new concentrations of NH₃, H⁺ or NH₄⁺ ions. Then, use Kb (NH₃) and Ka (NH₄⁺) as needed to find the concentration of OH⁻ ions and calculate the pH.

To know more about pH click on below link:

https://brainly.com/question/2288405#

#SPJ11

The law of mass action for the given equation is that the rate of the forward reaction is proportional to the product of the concentrations of the reactants (a and b) raised to their stoichiometric coefficients (2 and 1, respectively), while the rate of the reverse reaction is proportional to the product of the concentrations of the products (c and d) raised to their stoichiometric coefficients (1 and 3, respectively). Therefore, the expression for the equilibrium constant (Kc) is:

Kc = [c][d]^3 / [a]^2[b]

where [ ] represents the concentration in moles per liter. This equation relates the equilibrium concentrations of the species in the reaction to the value of Kc, which is a constant at a given temperature.

Learn more about law of mass action: Explain the law of conservation of mass and how it applies to balancing chemical equations https://brainly.com/question/2030891

#SPJ11

The pKa of the unknown weak acid is 4.9. (B)

To determine the pKa of the weak acid, follow these steps:

1. You are given the pH (3.7) and concentration (0.02 M) of the weak acid solution.

2. Calculate the hydrogen ion concentration [H⁺] using the pH formula: pH = -log[H⁺].

3. Rearrange the formula to solve for [H⁺]: [H⁺] = [tex]10^-^p^H[/tex].

4. Plug in the pH value: [H+] =[tex]10^-^3^.^7[/tex] ≈ 2.0 x 10⁻⁴ M.

5. Use the weak acid dissociation constant (Ka) expression: Ka = ([H⁺]²) / ([HA]⁻ [H⁺]), where [HA] is the initial concentration of the weak acid.

6. Solve for Ka: Ka = (2.0 x 10⁻⁴)² / (0.02 - 2.0 x 10⁻⁴) ≈ 2.0 x 10⁻⁹.

7. Calculate the pKa: pKa = -log(Ka).

8. Plug in the Ka value: pKa = -log(2.0 x 10⁻⁹) ≈ 4.9.

To know more about acid dissociation constant click on below link:

https://brainly.com/question/4363472#

#SPJ11

The amount of sodium lactate needed to make a pH 4 solution in 100 ml of 0.10 M is 1.1206 grams.

To make a 100 mL solution of 0.10 M sodium lactate with a pH of 4, you will first need to calculate the required amount of sodium lactate in grams. The formula for this calculation is:

grams = moles × molar mass

Sodium lactate has a molar mass of 112.06 g/mol. To find the moles needed for a 0.10 M solution in 100 mL, use the formula:

moles = Molarity × Volume (in Liters)

moles = 0.10 M × (100 mL / 1000 mL/L)

= 0.010 moles

Now, calculate the grams of sodium lactate needed:

grams = 0.010 moles × 112.06 g/mol

= 1.1206 grams

So, you need 1.1206 grams of sodium lactate to make a 100 mL solution with a pH of 4 and a concentration of 0.10 M.

Learn more about sodium lactace: https://brainly.com/question/2274878

#SPJ11