By mass, the interstellar medium in our region of the Milky Way consists of
A) 70% Hydrogen, 30% Helium.
B) 70% Hydrogen, 28% Helium, 2% heavier elements.
C) 70% Hydrogen, 20% Helium, 10% heavier elements.
D) 50% Hydrogen, 50% Helium.
E) 50% Hydrogen, 30% Helium, 20% heavier elements.

Answer:

25 m/s

Explanation:

v^2-u^2=2as

a= (v^2-u^2)

The magnitude of the total momentum of the two-arrow system can be calculated by adding the magnitudes of the individual momenta of each arrow is 4.242.

Calculation=

total momentum = sqrt ( m1u1^2 + m2 u2 ^2)

m1 u2 = 30 * 0.1 = 3

total momentum = sqrt ( 9 + 9 ) = 3 sqrt (2) = 4.242

As a result, from the moment the projectile is hurled, through its greatest point, and until it touches the earth, its acceleration is 9.81 meters per second per second, or equal to the acceleration caused by gravity.

to know more about magnitude here:

brainly.com/question/14154454

#SPJ4

Torque is defined as the cross product of the force and the distance from the center to the point of application (force = r * F * sin) (theta)

Keep in mind that at 90 degrees, the torque is at its highest level. Finding the lever arm and multiplying it by the applied force is a useful method for calculating the amount of torque. The distance that separates the force's line of action from its rotational axis is known as the lever arm.

Perpendicular describes two straight lines that meet at a 90-degree angle. When it comes to geometric proofs and examining various vertices and angles, perpendicular lines can be used in a variety of ways. They are helpful for making sure things are straight and aligned properly when painting or building.

to know more about torque here:

brainly.com/question/25708791

#SPJ4

The sound level of rusting leaves is 20db.

Rustle is a quiet, muted cracking sound made when dry paper or leaves are moved. The movement of weak objects, like the leaves, produces a gentle sound. Ruffle would be the appropriate response because "leaves" is the noun in the sentence.

Over time, so many people have been mesmerized by the sounds of wind in the trees and the rustling of leaves, that they came up with the term "psithurism" to describe them. Psithurism has a silent first "p," like many other words that start with "ps," and is pronounced sith-err-iz-um.

We sometimes refer to a wind that is howling when it is strong and noisy: The trees shook as the wind howled.

To learn more about Sound level from given link

https://brainly.com/question/30160873

#SPJ4

The solutions are: The movement is 5 mm per year. The plate is 5,000 meters to the east. The Amur and Eurasian plates would collide, creating an ocean floor.

The rate of motion is in mm per year so you need to convert the distance it has moved to millimeters.

1 meter = 1,000 meters

125,000 will therefore be:

= 125,000 * 1,000

= 125,000,000 millimetersRate of motion = 125,000,000 / 25,000,000 years

= 5 mm/year

The plate is moving east and in 1 million years it would be:

= 1,000,000 * 5 mm/year

= 5,000,000 mm

n meters this is:

= 5,000,000 / 1,000

5,000 meters east

ecause the Amur and the Eurasian plates are moving apart, the ocean would have to fill up the space left which would lead to the development of a new oceanfloor.

Learn more about motion here-

https://brainly.com/question/22810476

#SPJ4

Answer: 5 mm/year, 5000 meters east, new ocean floor

Explanation:

The diagram for the standing wave after the tension is quadrupled while the frequency is held constant has been attached and explained below.

We already know that the frequency of a standing wave is given by,

= f = nv/2l

and

= v = [tex]\sqrt{\frac{T}{m} }[/tex]

In the given problem, the frequency of the wave after the tension is quadrupled will be -

= f2 = 2v/2l

= f2 = v/l

= f2 = 1/l  [tex]\sqrt{\frac{T}{m} }[/tex]

Now, since we have quadrupled the tension, we have -

= f = 1/l  [tex]\sqrt{\frac{4T}{m} }[/tex]

= f = 2(f2)

So, now we know that the final frequency will be of this form(the image has been attached here) and it would look like this if the tension is quadrupled while the frequency is held constant.

Learn more about standing waves on

https://brainly.com/question/1121886?referrer=searchResults

#SPJ4

The properties of waves are: wavelength, time period.

Sound wave is considered a mechanical wave because it requires medium to travel.

A mechanical wave is one whose energy cannot be transmitted via a vacuum. To transfer their energy from one place to another, mechanical waves need a medium.

A mechanical wave is something like a sound wave. A vacuum can not be traversed by sound waves.

Units of time and space can be used to measure the fundamental characteristics of waves. The length between wave crests, or wavelength (L), and the time it takes a wave to pass a fixed point, or period (T), are two characteristics that can be measured directly.

Learn more about  mechanical wave here:

https://brainly.com/question/3101711

#SPJ1

And I can carry my nickels far more easily than you can your bucket of pen-nies. I would prefer to keep every pen-ny. A 40 inch circle would contain about 2507 pen-nies. About 493 nickels would be in a 20 inch circle.

To know more about Diameter here

https://brainly.com/question/23220731

#SPJ4

The amplitude of the pulse is 3 m, the equation of the pulse as a function of position and time is y(x) = 6/{(x - 3t)² + 2} m and the pulse is 15 m centred at time t = 5. 00s.

y(x) = 6/(x² + 2)

v = 3 m/s

The amplitude(A) of the pulse:

When x= 0, Then y = A

Put x= 0  

y(x) = 6/(x² + 2)

y(0) = 6/(0² + 2)

y = A = 3 m

Distance travel in time t  

x = vt

x = 3 t

y(x) = 6/{(x - 3t)² + 2}

The distance covered by the pulse in the time 5 s

D = v t

D = 3 x 5  

D = 15 m

To know more about amplitude, here

https://brainly.com/question/30185219

#SPJ4

The tension in the string can be found by using the equation for centripetal force. which is equal to 150.

This equation states that the centripetal force (Fc) is equal to the mass of the object (m) multiplied by the square of the velocity (v) and divided by the radius (r). Therefore,

Fc = m x v²/r.

In this case, the centripetal force is equal to the tension in the string, so the tension in the string (T) can be found by rearranging the centripetal force equation to

T = m x v²/r.

Substituting in the given values for mass (m) and radius (r) gives

T = 0.304 kg x (2.83 m/s)²/0.44 m

T= 150N

Therefore the tension of the string is 150N

Learn more about tension:

https://brainly.com/question/24994188

#SPJ4

The magnitude of the passenger's acceleration as she passes through the lowest point in her circular motion is the centripetal acceleration.

This is given by the equation a = v^2 / r, where v is the velocity of the passenger and r is the radius of the circle. Therefore, the magnitude of the passenger's acceleration is equal to the square of her velocity divided by the radius of the circle.

For example, if the passenger is travelling at 10 m/s in a circle with a radius of 5 m, then her centripetal acceleration would be 10^2 / 5 = 20 m/s^2.

Learn more about acceleration:

https://brainly.com/question/460763

#SPJ4

The law of conservation of momentum states that the momentum of a system is equal and conserved before and after collision. Therefore, the final momentum of the system is 513 kgm/s.

The law of conservation of momentum states that, for two or more bodies which are present in an isolated system that are acting upon each other, their total momentum remains constant in the system unless an external force is applied on them. The expression for conservation of momentum is:

m₁ u₁ + m₂u₂ = m₁v₁ + m₂v₂

where, m₁ = mass of one object,

m₂ = mass of another object,

u₁ and u₂ are the initial velocities of objects,

v₁ and v₂ are the final velocities of objects.

Here, m₁ = 95kg, m₂ = 120kg

u₁ = 5.4m/s, u₂ = 0m/s (at rest)

m₁ u₁ + m₂u₂ = m₁v₁ + m₂v₂

95 × 5.4 + 120 × 0 = 95 × v₁ + 120 × v₂

513 + 0 = 95 × v₁ + 120 × v₂

Momentum before collision = Momentum after collision

Therefore, the momentum after collision is 513 kgm/s.

Learn more about Momentum here:

https://brainly.com/question/24030570

#SPJ1

The graph that best illustrates how the intensity of sound varies as a detector is moved further and further from a stationary source projecting sound in all directions would be an inverse square law graph. This graph would show that the intensity of sound decreases as the distance from the source increases. The intensity of sound is inversely proportional to the square of the distance from the source.

This means that if the distance from the source is doubled, the intensity of sound is decreased by a factor of four. This relationship is commonly observed in physics and engineering and is known as the inverse square law of sound propagation. This law states that the intensity of sound decreases as the distance from the source increases in a manner that is inversely proportional to the square of the distance.

Read more about wave propagation:

https://brainly.com/question/9349349

#SPJ4

The method used when an entire mole is removed for examination under a microscope is called an excisional biopsy.

This method involves the surgical removal of the entire mole and some surrounding skin which is then examined under a microscope to check for any abnormal cells or signs of cancer. This method is typically used when a mole is suspected to be malignant or when it cannot be clearly diagnosed as benign through other methods such as a shave or punch biopsy.

The key benefit is that, as opposed to an incisional biopsy, when a bit of the tissue is taken to provide a diagnosis but it will likely still need to be treated later, the aberrant tissue may be identified, diagnosed, and removed in one operation.

Learn more about excisional biopsy here: https://brainly.com/question/29430351

#SPJ4

Work is accomplished by stretching or compressing a spring. Elastic potential energy is stored in the spring. It is recommended to expand the spring up to 12.8 cm.

Elastic potential energy is stored in the spring as a result of the work required to stretch or compress it. A spring's elastic potential energy is equal to one-half the sum of its spring constant times its deformation squared.

We'll talk about elastic potential energy as the second type of potential energy. The energy that is trapped in elastic materials as a result of their stretching or compression is known as elastic potential energy.

To know more about spring stretched here:

brainly.com/question/14203117

#SPJ1

The force that was applied to the lever to raise the load of 220 Newtons   toa distance of 4 m is 100 N.

The correct option is C.

A lever gives you the ability to move an object with a certain advantage, allowing you to do so with either less effort or more speed or displacement.

The use of forces and the exploitation of the torques they produce is how levers function. By changing the balance, we can carry large objects with little effort.

The law of the lever is given below as follows:

Fa / Fb = b / a

where;

The effort applied, Fa, is calculated below:

Fb = 220 N

a = 10 m

b = 2 m

Fa = Fb * b / a

Fa = 220 * 2 / 10

Fa = 44 N

Work done = Force * distance

distance = 4 m

400 J = Force * 4

Force = 400 / 4

Force = 100 N

Learn more about force and levers at: https://brainly.com/question/416386

#SPJ1

Arc bursts, electrical burns, and electric shock are the three basic categories of electrical risks (the effect of blasts).

Live wire contact can result in electric shock and burns.

fires caused by poor wiring.

circuits that are overloaded

Leave electrical components unprotected.

due to a lack of PPE, electrocution or burns.

explosive and flammable materials causing explosions and fires.

exposure to electricity wires above.

A reaction to an electric current running through the body is shock.

Burns are brought on by arc flashes and blasts of strong light.

Old wiring, wires, and switches can cause fires, as can malfunctioning outlets.

When explosive substance in the air is ignited by electricity, an explosion occurs.

The primary concerns connected to them are: contact with exposed live parts causing electric shock and burns (for example, exposed leads or other electrical equipment coming into contact with metal surfaces like metal flooring or roofs); and failures that could result in fires.

To learn more about electrical refer to:

https://brainly.com/question/12791045

#SPJ4

Answer:

Centimeters.

Explanation:

There are only 2 viable answers here. This is due to the fact that moles are used not to measure diameters but instead the number of atoms.

Similarly, milligrams are not used to measure diameters but instead small volumes.

This leaves us with kilometers and centimeters, and since all 3 objects are more easily representable in centimeters than kilometers, the answer must be centimeters. One example would be the diameter of a ping pong ball, which is approximately 4cm, or in other words, 0.00004km, with 4cm being much more easy to represent as it overall involves less digits.

According to given data the volume of the unknown sample is 52. 5 mL - 47. 0 mL = 5.5 ml.

One typical style of lab glassware is graduated cylinders. They are a long, cylindrical vase with graduations marking the volume of liquid they can hold. Spouts are frequently included to make pouring easier.

Your graduation will go down in history as a significant event; it will stand for development, change, and embarking on new experiences. Celebrate your accomplishments thus far and be grateful for the memories this phase of your schooling has provided you.

To know more about Graduated cylinders visit :-

brainly.com/question/26173436

#SPJ4

In the United States, there were 3,494 radio broadcasting stations in 2009. Radio reaches approximately 68 percent of American customers aged 12 and older on average each day, and 236 million people listen to radio every week, according to records.

Since their beginnings at the turn of the 20th century, radio stations in the United States have changed. Following the establishment of 8MK in Detroit in 1920, thousands of private and public radio stations have operated across the country. There are several different ways to organise the lists of radio stations in the US.

The Federal Communications Commission oversees radio transmission in the US (FCC). Various broadcasting services, including the following, have been produced under the AM broadcast band, which runs from 540 to 1700 kHz, is where radio transmission initially gained popularity in the 1920s.

To know more about radio

https://brainly.com/question/15308544
#SPJ4

Answer:

translational energy

Explanation:

because is diatomic

(a) The charge carrier density doubles,(b) The current density doubles, (c) The electron drift velocity doubles, (d) The average time interval between collision halved.

I = nq[tex]v_{d}[/tex]A

where n is the charge/volume

I is the current.

q is the charge per carrier

[tex]v_{d}[/tex] is the drift velocity of the charge carriers

A is the cross-sectional area of current flow

Here,

a) The charge carrier density (n) doubles if I doubles.

b) The charge carrier density (J = I/A is the current density).  If I doubles, J doubles.

c)  The electron drift velocity ([tex]v_{d}[/tex]) doubles if I doubles.

d)  The average time interval between collisions depends inversely on [tex]v_{d}[/tex].  If I doubles, [tex]v_{d}[/tex] doubles, so the average time between collisions is halved.

To learn more about I (current):

brainly.com/question/1256531

#SPJ4

According to the given statement 67.7%  is the efficiency of the engine.

A comparison of the energy output and input in a particular system is called efficiency in physics (and frequently in chemistry). Its definition is the proportion of output energy to input energy, which is provided by the equation: To describe energy in the form of heat or power, this equation is frequently utilized.

n = 1 - (QC/QH)

n = efficiency

QC = Cold Reservoir = 220 K

QH = Hot Reservoir = 680 K

n = 1 - (220 ÷ 680)(÷10)

n = 1 - (22 - 68) (2)

n = 1 - (11 ÷ 34 )

n = (34 - 11) ÷ 34

n = 23 ÷ 34

n = 0.676 * 100

n = 67.6

Therefore, 67.6% is the efficiency of the engine.

Learn more about efficiency from the given link.

brainly.com/question/13222283

#SPJ4

At kelvin temperature T, cylinder A includes n molecule of a gas, and the force exerted by the gas on the cylinder is NkBT/l.

When two bodies interact, it refers to any form of pushing or pulling that one body exerts on the other. A vector quantity, that is. For instance, a person pushes or pulls on something to provide force, such as opening a door.

Contact forces that act at a remove forces are the two different types of forces. Your daily use of force is evident. Basically, pressure and pull are forces.

Formulas,

-P = F/A

-n = n/Na

-PV = nRT

= NKT (R = KNa)

- Volume of cylinder: A* l

F=PA

P = NKbT / V

P = NKbT / A* l

F = NkBT / A * l (A)

Cross out A,

Final, F = NkBT/l.

To know more about force visit:

https://brainly.com/question/13191643

#SPJ1

Sound is important because it engages audiences: it helps deliver information, it increases the production value, it evokes emotional responses.

To learn more about sound refer to:

https://brainly.com/question/30106395

#SPJ4

It would take 5 pounds of force, that is equal force, to stop the ball from rolling because the same amount of force must be used to stop the object.

According to Newton's third law of motion, every action which is occurring in nature has an equal as well as an opposite reaction. For instance, if a particular object A happens to exert a force on another object B, then  object B will also be exerting an equal as well as an opposite force on  object A.

If a particular ball is rolling with 5 pounds of force then the same amount of reaction will be required to bring it to rest. That is, equal force of 5 pounds will be required to stop the ball.

Hence, option D is the correct option.

To know more about force here

https://brainly.com/question/14898506

#SPJ4

Answer: yes

Explanation:

not to sure

The required temperature of the system which has a certain entropy change and receives heat energy is 273.36 °C.

Given that,

The change in entropy of the system = 675 J/K

Heat energy = 243 J

Temperature of the system = ?

The temperature of the system is calculated below.

ΔS = ΔH/T

where,

ΔH is the heat energy

ΔS is the change in entropy of the system

T = ΔH/ΔS = 243/675 = 0.36 K

By converting temperature in kelvin to temperature in degrees centigrade, we get,

T = 273 + 0.36 = 273.36 °C

Thus, temperature of the system which has a certain entropy change and receives heat energy is 273.36 °C.

To know more about temperature:

https://brainly.com/question/20940838

#SPJ4

Answer:

But the safest way to loosen a tight cap may be to run hot water on it so that it expands slightly.

Explanation:

By calculating carbon emissions reduction and sustainability index improvement, the Accenture MyNav Green Cloud Advisor incorporates sustainability when moving client data centers to the cloud.

The availability of computer system resources without the user having to manage them directly is referred to as cloud computing. The network of remote servers located on the internet in this instance aids in the management and storage of the data.

Mynav Green Cloud Advisor is essential since it aids businesses in creating cloud solutions that may be utilized to lower carbon emissions.

As cloud solutions are essential to businesses, Accenture MyNav Green Cloud Advisor integrates sustainability.

To learn more about Accenture and sustainability from given link

https://brainly.com/question/24918185

#SPJ4