C3H8+3O2 = 3CO2+4H2O what is the enthalpy combustion please show work

Answer:

Our bodies are designed to regulate our temperature. When it's cold outside, your body makes sure to keep the blood flowing to your core and vital organs to keep them warm. This can change the amount of blood flow to your hands and feet, making them feel cold

The reactant present in more amounts is called excess reagent. In the reaction between Mg and sulphuric acid, the reaction gradually stopped due to the consumption of the acid. Thus, option B is correct.

An excess reagent is a chemical reactant present in more quantity than the other substance or reactant in the reaction. They are not totally consumed after the reaction ends, unlike the limiting reagent.

In the reaction, magnesium is the excess reagent while dilute sulphuric acid is a limiting reagent that determines the reaction rate and the product formation. At first, the reaction will be fast but gradually will become slow as all dilute sulphuric acid will be consumed slowing downs and stopping the reaction.

Therefore, dilute sulphuric acid will be used up at the end of the reaction.

Learn more about excess and limiting reagents here:

https://brainly.com/question/11848702

#SPJ5

Answer: a reason for this is fossil fuels

Explanation:

The reduction in SO2 is largely due to the implementation of the Acid Rain Program under the Clean Air Act through a cap and trade program for fossil-fuel powered plants.

Answer:

London dispersion forces are the only type of intermolecular forces that nonpolar molecules exhibit.

The molecules in SO2 (g) exhibit dipole-dipole intermolecular interactions.

CH3CH2CH3 has stronger London dispersion forces than does CH4.

Explanation:

London forces result from temporary shifts or distortion in the electron cloud of non-polar molecules. London forces occur in all substances; whether polar or non-polar. However, it is the only kind of intermolecular force in non-polar molecules and noble gases.

Polarity in a molecule stems from difference in electronegativity between the atoms in the molecule. SO2 is a polar molecule due to the magnitude of electronegativity difference between sulphur and oxygen. Hence SO2  exhibit dipole-dipole intermolecular interactions since it is a polar molecule.

The magnitude of London dispersion forces depends on the molar mass and surface area of molecules. CH3CH2CH3  has a higher molar mass and larger surface area than CH4 hence CH3CH2CH3  has stronger London dispersion forces than does CH4.

The following statements which are true include

London forces are the only type of intermolecular force found in non polar

compounds and they are responsible for their attractive interactions.

The molecules in SO2 (g) exhibit dipole-dipole intermolecular interactions as

a result of it being polar.

CH3CH2CH3 has stronger London dispersion forces than does CH4

because it is more non-polar and it is the characteristic attraction found in

non-polar compounds.

Read more on https://brainly.com/question/22984560

Answer:

C) 0.457

Explanation:

The ratio between O2 and H2O is 1:2 according to the balanced equation. You can find how many moles is O2 by : 5.12/22.4 = 0.22857 ( 1 mole = 22.4 litters)

Moles of H2O will be 0.22857 * 2 = 0.457142.

Therefore answer C)

Answer:

   true

Explanation:

and don't look up the link everyone says it's scam bots

Answer:there different from the rocky like planets gas giants don't have such a firm surface like rocky terrestrial planets

Explanation:

Answer:

-198 kJ

Explanation:

Hello there!

In this case, as the reaction is not given but we can see that HBr is formed, we can infer that reaction is:

[tex]H_2+Br_2\rightarrow 2HBr[/tex]

Whereas the -72 kJ per moles of HBr are:

[tex]\frac{-72kJ}{2molHBr}[/tex]

Thus, by multiplying by the formed 5.5 moles of HBr, the total energy release is:

[tex]\frac{-72kJ}{2molHBr} *5.5molHBr\\\\=-198kJ[/tex]

Best regards!

Answer:

because its electrified and it like makes it own force feild

The full question is shown in the image attached

Answer:

See explanation

Explanation:

In naming an alkane, the first thing we do is to obtain the parent chain by counting the number of carbon atoms in the chain.

When we obtain that, then we identify the substituents and number them in such a way that they have the lowest numbers. The compounds shown have the following names according to the order in which the structures appear in the image attached;

1. 2-methyl propane

2. 2,4-dimethyl heptane

3. 2,2,3,3-tetramethyl butane

4. 5-ethyl-2,4-dimethyl octane

3:6:2 is the correct answer

Answer:

The final pressure is 90.1 atm.

Explanation:

Assuming constant temperature, we can solve this problem by using Boyle's Law, which states:

Where in this case:

We input the given data:

And solve for P₂:

The final pressure is 90.1 atm.

Answer: 2755.2 g of [tex]Fe[/tex] will be produced from 24.6 mol of haematite.

Explanation:

The balanced chemical equation is:

[tex]Fe_2O_3+3CO\rightarrow 2Fe+3CO_2[/tex]  

According to stoichiometry :

1 mole of [tex]Fe_2O_3[/tex] produce = 2 moles of [tex]Fe[/tex]

Thus 24.6 moles of [tex]Fe_2O_3[/tex] will produce=[tex]\frac{2}{1}\times 24.6=49.2moles[/tex]  of [tex]Fe[/tex]  

Mass of [tex]Fe=moles\times {\text {Molar mass}}=49.2moles\times 56g/mol=2755.2g[/tex]

Thus 2755.2 g of [tex]Fe[/tex] will be produced from 24.6 mol of haematite.

Answer:

Mx will be less than My.

Explanation:

The correct option is - Mx will be less than My.

Because, liquid X have been higher viscosity and vapor pressure than liquid B.

Vapor pressure of liquid A is greater, so the amount of liquid X will vaporized greater and H2 gas has been displaced greater from the beaker as compared to liquid Y.

The amount of H2 in liquid Y remains greater in beaker as compared to liquid X.

So, Mx will be less than My.

Answer: When two hydrogen atoms pair together, they form a  single bond to achieve a complete duet which is a stable configuration.

When two halogens poir together,they form a single bond to achieve a complete octet which is a stable configuration  

When two oxygen atoma pair together, they form a double bond to achieve a complete octet which is a stable configuration

When two nitrogen atoms pair together, they form a triple bond to achieve a complete octet which is a stable configuration

Explanation:

The tendency of atoms to achieve a noble gas configuration that is eight valence electrons is said to be octet rule.  This is done to attain noble gas configuration and stability.

In order to attain stability the atoms tends to have eight electrons in its valence shell which can be obtained by either by sharing of electrons or complete transfer of electrons.

Hydrogen [tex](H:1s^1)[/tex] has one valence electron each, so sharing of electrons result in formation of single bond and the same electron configuration as the Helium and thus complete its duet.

Halogens [tex](F:1s^22s^22p^5)[/tex]  have 7 valence electron each, so sharing of electrons result in formation of single bond. The stable noble gas configuration is attained and thus complete its octet.

Oxygen [tex](O:1s^22s^22p^4)[/tex]  has six valence electrons each, so sharing of two electrons result in a double bond. The stable noble gas configuration is attained and thus complete its octet.

Nitrogen [tex](N:1s^22s^22p^3)[/tex]  has 5 valence electrons, so sharing of three electrons result in a triple bond. The stable noble gas configuration is attained and thus complete its duet.

Answer:

Sopes

In order to make them you will need

1.flour

2.Cheese

3.Lettuce

4. beans

5.tomatoe

Answer:

4th one. (A new experiment is designed to provide additional data about the hypothesis.)

Answer:

The correct answer is C)The hypothesis becomes a theory if the results support it.

Explanation:

Answer:

your answer is 3 hope this helps you

Answer:

A wind farm

Explanation:

another word is a wind park

Answer:

Explanation:

The correct option would be that the average kinetic energy of the gas particles is greater in container B because it has a higher temperature.

According to the kinetic theory of matter, the temperate of a substance is a measure of the average kinetic energy of the molecules of substance. In other words, the higher the temperature of a substance, the higher the average kinetic energy of the molecules of the substance.

In the illustration, the gas in container B showed a higher temperature than that of container A as indicated on the thermometer, it thus means that the average kinetic energy of the molecules of gas B is higher than those of gas A.

Answer:

Yes

Explanation:

As long as its a solid, you can count it. It will be hard, but possible.

Answer:

#3

Explanation:

Answer:

The pressure is equal to 4.87 torr and 0.649 kPa.

Explanation:

The atmospheric pressure was determined to be on the average about 6.50 millibars.

As 1 bar = 0.987 atm

6.5 mbar = 0.0065 bar

So,

0.0065 bar = (0.0065×0.987 ) atm

= 0.0064155  atm

Since, 1 atm = 760 torr

So, 0.0064155  atm = 4.87 torr

Since, 1 torr = 133.322 Pa

4.87 torr = 649.27 pa

or

4.87 torr = 0.649 kPa

Hence, the required pressure is equal to 4.87 torr and 0.649 kPa.

Answer:

D. In an experiment, one of the variables will be giving a placebo and the other, a treatment

Explanation:

Photosynthesis, the process by which green plants and certain other organisms transform light energy into chemical energy. During photosynthesis in green plants, light energy is captured and used to convert water, carbon dioxide, and minerals into oxygen and energy-rich organic compounds.

Answer:

2, 1, 1, 4.

Explanation:

Hello there!

In this case, for the given chemical reaction:

[tex]H_2SO_4+Pb(OH)_4\rightarrow Pb(SO_4)_2+H_2O\\[/tex]

We can see how there is one SO4 on the left and two on the right, thus, we add a 2 in front of H2SO4:

[tex]2H_2SO_4+Pb(OH)_4\rightarrow Pb(SO_4)_2+H_2O\\[/tex]

Next, since there are 8 atoms of hydrogen on the left and two on the right, we add a 4 in front of H2O to obtain:

[tex]2H_2SO_4+Pb(OH)_4\rightarrow Pb(SO_4)_2+4H_2O\\[/tex]

Which is now balanced so the coefficients 2, 1, 1, 4.

Best regards!

Answer:

See Explanation

Explanation:

The conductivity of water refers to how much it conducts electricity. The electrical conductivity of water increases as more ions are dissolved in it.

Hence, increase in concentration of dissolved ions improves the electrical conductivity of water.

Therefore, when a base (which is an ionic substance) is dissolved in water, the concentration of ions present increases and the conductivity of the solution increases accordingly since ions are charge carriers in solution.

The addition of a base to the sample results in an increase in the conductivity of the sample.

Conductivity can be defined as the transfer of charge by the sample. The sample has consisted of the ions that mediate the transfer of charge.

The sample with a high number of ions has consisted of high conductivity and vice versa. The dissolution of acid or base to the solution results in an increase in the number of ions in the solution, and thereby there has been an increase in the charge transfer.

Thus, with the increase in the charge transfer, there has been an increase in the conductivity of the sample.

For more information about the conductivity of the sample, refer to the link:

https://brainly.com/question/6072723

Answer:

CuSO4 cell will have the greatest amount of deposit among all three. The deposit will occur at the cathode

Explanation:

The valence of the elements in this case is as follows -

Cu - 2e-

Sn - 4e-

Cr - 3e-

CuSO4 cell will have the greatest amount of deposit among all three

The atoms of copper metal will deposit at the cathode. At the cathode, the least number of moles of electrons needed .

Hence, more amount of copper  can be extracted out by the electrolyte

The Lewis base that we can see in the equation is [tex]H_{2} O[/tex]

We have to bear in mind that the Lewis base is the substance that is able to donate a pair of electrons. The substances that is able to accept the pair of electrons is what we call the Lewis acid.

The Lewis acid must possess a space for the addition of an electron pair while the Lewis base would have to be a specie that has a lone pair of electrons or has a negative charge. Thus the water molecule would serve as a Lewis base in this regard.

Learn more about Lewis base;https://brainly.com/question/15570523

#SPJ1

Answer:

6 upper H subscript 2 upper O plus UPper C r (upper H subscript 2 upper O) subscript 6 superscript 3 plus.

✔ H2O or A.)

Cr3+

Cr(H2O)63+