Answer:
a = 6.22 m//s²
Explanation:
F = ma
a = F/m
a = 573.0 / 92.1
a = 6.221498...
Answer:
[tex]\boxed {\boxed {\sf 6.22 \ m/s^2}}[/tex]
Explanation:
We are asked to find the acceleration due to gravity on another planet.
Weight is the measure of the force of gravity. Therefore, we can use the following version of the force formula:
[tex]F_g=mg[/tex]
In this formula, [tex]F_g[/tex] is the weight, m is the mass, and g is the acceleration due to gravity.
The object weights 573.0 Newtons (or 573.0 kg*m/s²) on the planet. The object has a mass of 92.1 kilograms.
[tex]F_g[/tex]= 573.0 kg* m/s²m= 92.1 kgSubstitute these values into the formula.
[tex]573.0 \ kg*m/s^2 = 92.1 \ kg * g[/tex]
We are solving for g, so we must isolate the variable. It is being multiplied by 92.1 kilograms. The inverse of multiplication is division, so divide both sides of the equation by 92.1 kg.
[tex]\frac {573.0 \ kg*m/s^2}{92.1 \ kg}= \frac{92.1 \ kg*a}{92.1 \ kg}[/tex]
[tex]\frac {573.0 \ kg*m/s^2}{92.1 \ kg}=a[/tex]
The units of kilograms cancel.
[tex]6.22149837 \ m/s^2=a[/tex]
The original measurements of weight and mass have 4 and 3 significant figures. Our answer must have the least number of sig figs, or 3. For the number we found, that is the hundredth place. The 1 in the thousandths place tells us to leave the 2 in the hundredth place.
[tex]6.22 \ m/s^2=a[/tex]
The acceleration due ot gravity on planet Xyleneer is approximately 6.22 meters per second squared.
A solid sphere starts from rest and rolls down a slope that is 6.4 m long. If its speed at the bottom of the slope is 5.3 m/s, what is the angle of the slope
From the relationship between acceleration a and g on an inclined plane, the angle of the slope is 13 degrees
Given that a solid sphere starts from rest and rolls down a slope that is 6.4 m long. The speed at the bottom of the slope is 5.3 m/s, the distance travelled is 6.4 m. That is,
Initial velocity U = 0 ( since it starts from rest)
Final velocity V = 5.3 m/s
distance S = 6.4 m
Let us first calculate its acceleration by using third equation of motion.
[tex]V^{2}[/tex] = [tex]U^{2}[/tex] + 2aS
[tex]5.3^{2}[/tex] = 0 + 2 x 6.4a
28.09 = 12.8a
a = 28.09 / 12.8
a = 2.2 m / [tex]s^{2}[/tex]
To calculate the angle of the slope, let us use the relationship between acceleration a and g on an inclined plane.
acceleration a = gsin∅
substitute all the relevant parameters
2.2 = 9.8 sin∅
sin∅ = 2.2/9.8
sin∅ = 0.224
∅ = [tex]Sin^{-1}[/tex](0.224)
∅ = 12.97 degrees
∅ = 13 degrees (approximately)
Therefore, the angle of the slope is 13 degrees
Learn more about inclined plane here: https://brainly.com/question/25845680
Youssef and Sophia are driving in two different cars and not paying attention to their surroundings. Youssef approaches an intersection moving 11 m/s East while Sophia approaches the same intersection moving 13.5 m/s North. Both speeds are measured relative to the ground. When Youssef is 220 m from the intersection, Sophia is 275 m from the intersection. Do the two cars collide when they reach the intersection
Answer:
I think E--
Explanation:
Can you please do this for me I’ll do 75 points
Answer:
Answer below, hope this helps!
Explanation:
1. Chemical - e
2.Light - b
3. Sound - g
4. Mechanical - f
5. Kinetic - a
6. Potential - d
7. Energy - j
8. Thermal - c
9. Nuclear - i
10. Electrical - h
Answer:
Chemical - e
Light - b
Sound - g
Mechanical - f
Kinetic - a
Potential - d
Energy - j
Thermal - c
Nuclear - i
Electrical - h
Explanation:
describe the forces acting on a car as it movies along a level highway in still air at a constant speed
Answers
The car's forward motion is opposed by the friction between the road and the tires and by the resistance of the air.
help i am having a mental breakdown help! need this done...
*graph is below* help
1. What is Peter’s total distance traveled? What is Peter's displacement?
2. Is there a time when Peter is not moving? If so, when?
Please help
A man stands on a freely rotating platform with his arms extended, his rotational frequency is 0.25rev/s. But when he draws them in, his frequency is 0.80revs/s. Find the ratio of his moment of inertia in the first case to that in the second.
Answer:
sorry for you
The ratio of the man's moment of inertia in the first case (arms extended) to that in the second case (arms drawn in) is 3.2.
The relationship between the rotational frequency [tex](\(\omega\))[/tex] and moment of inertia (I) is given by the equation:
[tex]\[I_1\omega_1 = I_2\omega_2\][/tex]
where [tex]\(I_1\)[/tex]and [tex]\(I_2\)[/tex] are the moments of inertia in the two cases, and [tex]\(\omega_1\) and \(\omega_2\)[/tex] are the corresponding rotational frequencies.
Let's denote the moment of inertia in the first case (arms extended) as [tex]\(I_1\)[/tex] and in the second case (arms drawn in) as [tex]\(I_2\)[/tex]. The given rotational frequencies are [tex]\(\omega_1 = 0.25 \, \text{rev/s}\) and \(\omega_2 = 0.80 \, \text{rev/s}\)[/tex].
Using the equation [tex]\(I_1\omega_1 = I_2\omega_2\)[/tex], we can rearrange it to solve for the ratio of moments of inertia:
[tex]\[\frac{I_1}{I_2} = \frac{\omega_2}{\omega_1}\][/tex]
Substituting the given values, we have:
[tex]\[\frac{I_1}{I_2} = \frac{0.80 \, \text{rev/s}}{0.25 \, \text{rev/s}}\][/tex]
Simplifying the expression, we get:
[tex]\[\frac{I_1}{I_2} = 3.2\][/tex]
Therefore, the ratio of the man's moment of inertia in the first case (arms extended) to that in the second case (arms drawn in) is 3.2.
know more about inertia:
https://brainly.com/question/3268780
#SPJ2
A load of 20N is lifted through a height of 8m by a machine.If the effort of 80N moves a distance of 6m.Calculate the efficiency percentage of the machine
A load of 20N is lifted through a height of 8m by a machine.If the effort of 80N moves a distance of 6m.Calculate the efficiency percentage of the machine
Explanation:
A load of 20N is lifted through a height of 8m by a machine.If the effort of 80N moves a distance of 6m.Calculate the efficiency percentage of the machine
Answer:

Join / Login
Join / LoginQuestion
Join / LoginQuestion
Join / LoginQuestionIn a lifting machine an effort of 500 N is to be moved by a distance of 20 m to raise a load of 10000 N by a distance of 0.8 m Determine the velocity ratio and mechanical advantage
Determine the velocity ratio and mechanical advantageA
Determine the velocity ratio and mechanical advantageA10 and 35
Determine the velocity ratio and mechanical advantageA10 and 35B
Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35
Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C
Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C10 and 25
Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C10 and 25D
Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C10 and 25D25 and 20
Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C10 and 25D25 and 20Easy
Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C10 and 25D25 and 20EasyOpen in App
Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C10 and 25D25 and 20EasyOpen in AppSolution
Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C10 and 25D25 and 20EasyOpen in AppSolution
Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C10 and 25D25 and 20EasyOpen in AppSolutionVerified by Toppr
Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C10 and 25D25 and 20EasyOpen in AppSolutionVerified by TopprCorrect option is
Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C10 and 25D25 and 20EasyOpen in AppSolutionVerified by TopprCorrect option isD
Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C10 and 25D25 and 20EasyOpen in AppSolutionVerified by TopprCorrect option isD25 and 20
Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C10 and 25D25 and 20EasyOpen in AppSolutionVerified by TopprCorrect option isD25 and 20Distance moved by effort is 20m,that of load is 0.8m
Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C10 and 25D25 and 20EasyOpen in AppSolutionVerified by TopprCorrect option isD25 and 20Distance moved by effort is 20m,that of load is 0.8mVR=LdEd
Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C10 and 25D25 and 20EasyOpen in AppSolutionVerified by TopprCorrect option isD25 and 20Distance moved by effort is 20m,that of load is 0.8mVR=LdEdVR=0.820
Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C10 and 25D25 and 20EasyOpen in AppSolutionVerified by TopprCorrect option isD25 and 20Distance moved by effort is 20m,that of load is 0.8mVR=LdEdVR=0.820VR=25
Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C10 and 25D25 and 20EasyOpen in AppSolutionVerified by TopprCorrect option isD25 and 20Distance moved by effort is 20m,that of load is 0.8mVR=LdEdVR=0.820VR=25the load is 10,000N and effort=500N
MA=effortdloadd
MA=effortdloaddMA=50010000
MA=effortdloaddMA=50010000MA=20
A 45 kg figure skater is spinning on the toes of her skates at 1.1 rev/s. Her arms are outstretched as far as they will go. In this orientation, the skater can be modeled as a cylindrical torso (40 kg, 20 cm average diameter, 160 cm tall) plus two rod-like arms (2.5 kg each, 71 cm long) attached to the outside of the torso. The skater then raises her arms straight above her head. In this latter orientation, she can be modeled as a 45 kg, 20-cm-diameter, 200-cm-tall cylinder.
What is her new rotation frequency, in revolutions per second?
Answer: HOPE THIS HLEP YOU
Explanation:
In which of the following situations is the Doppler Effect absent?
The source and the observer are moving towards each other.
The observer is moving toward the source.
The source is moving away from the observer.
The source and the observer are both moving with the same velocity.
Answer:
Correct option is
C
The listener is moving towards the source of sound
The Doppler effect (or the Doppler shift) is the change in frequency or wavelength of a wave (or another periodic event) for an observer moving relative to its source.
So if both listener and source of sound are stationary or are moving with the same velocity that is relative velocity is zero, there won't be any change in frequency.
Thus, in this case, the effect will arise when a listener is moving towards the source of the sound.
An astronaut is doing thee simple pendulum experiment on a different planet to measure the acceleration due to gravity. If the length of the pendulum is 45 cm and the period of oscillations is equal to 1.428 s, what is the acceleration due to the gravity of the planet
The acceleration due to gravity on the given planet is 8.71 m/s².
The given parameters;
Length of the pendulum, L = 45 cm Period of the oscillation, T = 1.428 sThe acceleration due to gravity on the planet is calculated by applying following formula as follows;
[tex]T = 2\pi \sqrt{\frac{l}{g} } \\\\\frac{T}{2 \pi } = \sqrt{\frac{l}{g}} \\\\\frac{T^2}{4\pi ^2} = \frac{l}{g} \\\\g = \frac{4\pi^2 l}{T^2} \\\\g = \frac{4 \times (\pi)^2 \times 0.45}{1.428^2} \\\\g = 8.71 \ m/s^2[/tex]
Thus, the acceleration due to gravity on the given planet is 8.71 m/s².
Learn more about period of oscillation here: https://brainly.com/question/20070798
A block slides down a smooth ramp, starting from rest at a height h. When it reaches the bottom it's moving at speed v. It then continues to slide up a second smooth ramp. At what height is its speed equal to v/2
Answer:
3h/4
Explanation:
At speed v/2 height will be 3/4 h
What is equation of motion in kinematics?Equation that describes the motion of point , bodies , and system of bodies without considering the force that cause them to move is called equation of motion in kinematics
When block is at top of first ramp
u=0 ( block was at rest )
a = g ( acceleration due to gravity
using equation of motion
2as = v^2 - u^2
2gh = v^2
Then the block continued and reached a speed of v1 = v/2 on second ramp
now , final velocity = v= v1 =[tex]\sqrt{2gh}[/tex] / 2
u= [tex]\sqrt{2gh\\}[/tex]
s= h1
using equation of motion , we get
2as = v^2 - u^2
2(-g)h1 =( [tex]\sqrt{2gh}[/tex]/2)^2 - [tex]\sqrt{2gh}[/tex]
2(-g)h1 = (g h - 4 g h) / 2
h1 = 3/4 h
At speed v/2 height will be 3/4 h
learn more about equation of motion in kinematics:
https://brainly.com/question/14355103?referrer=searchResults
#SPJ2
last one i promise!!
Answer:
B
Explanation:
because when they are in opposite direction we subtract so 10N-10N=0 the second one is in the same direction so we simply add the 2 numbers so 10N+10N=20N the last one is as the same as the first picture we subtract 10N-8N=2N
organize the three states of matter from least kinetic energy to greatest kinetic energy
Particle arrangement and movement
⇒ In terms of relative energy, gas particles have the most energy, solid particles have the least energy and liquid particles are somewhere in between. (All compared at the same temperature.)
- BRAINLIEST answerer
What happened when a lobster release a claw? a. The lobster attacks with the claw. b. The lobster let the claw go. C. The lobster bites off the claw. D. The lobster eats with the claw.
Answer:b
Explanation:
Answer:
The lobster let the claw go. so, B.
Explanation:
i hope this helps.
The Air Force is F 22 raptor fighter jets mass is 21,000 KG the F 22 is flying at a height of 26,000 miles what is its gravitational potential energy
Answer:
5460000000 J OR 5460000 KJ
Explanation:
GPE = mgh
21000*10*26000
=5460000000J OR 5460000KJ
A weather forecaster uses a computational model on a Monday to predict the weather on Friday. Why might that forecast change? (1 point)
A. The forecaster may have done the calculations a second time because he made a mistake in the calculation.
B. Someone may have reported the weather incorrectly before the first computation.
C. The forecaster may have had the computer model do the calculations a second time, and he found that the prediction changed.
D. An area of low pressure might move more quickly on Tuesday and Wednesday than expected.
Answer:
D. An area of low pressure might move more quickly on Tuesday and Wednesday than expected.
Explanation:
I took the test and got it wrong :/
A vector has a magnitude of 30m at an angle of 225 degrees with respect to the positive x-axis and has a magnitude of 13m.what are the Component of vectors B and it's direction
Answer:
I'm pretty sure this is not a complete question. My guess is that you are trying to add/subtract vectors. Vectors have both magnitude and direction, so vector A is pretty clear, but a magnitude of 13 (i'm guessing a resultant) without a direction is weird.
IF 13 is the magnitude of the resultant, vector B added to vector A could have any magnitude 17 ≤ B ≤ 43
It could have any direction of
θ = (225 - 180) ± arcsin(13/30)
θ = 45 ± 25.679...
70.679 ≤ θ ≤ 19.321
components of vector B would be
Bx = |B|cosθ
By = |B|sinθ
My guess is that you are trying to add/subtract vectors. Vectors have both magnitude and direction, so vector A is pretty clear, but a magnitude of 13 (i'm guessing a resultant) without a direction is weird.
What is magnitude of the resultant?IF 13 is the magnitude of the resultant, vector B added to vector A could have any magnitude 17 ≤ B ≤ 43
It could have any direction of
θ = (225 - 180) ± arcsin(13/30)
θ = 45 ± 25.679...
70.679 ≤ θ ≤ 19.321
components of vector B would be
Bx = |B|cosθ
By = |B|sinθ
My guess is that you are trying to add/subtract vectors. Vectors have both magnitude and direction, so vector A is pretty clear, but a magnitude of 13 (i'm guessing a resultant) without a direction is weird. A vector has a magnitude of 30m at an angle of 225 degrees with respect to the positive x-axis and has a magnitude of 13m.
Therefore, My guess is that you are trying to add/subtract vectors. Vectors have both magnitude and direction, so vector A is pretty clear, but a magnitude of 13 (i'm guessing a resultant) without a direction is weird.
Learn more about magnitude on:
https://brainly.com/question/14452091
#SPJ2
Look up the specs on a c6 rocket engine. How many C6 engines would it take to launch Mr. Blazey (90kg)
from the elevation of Boulder to the elevation of longs peak? (3 points) What would the max power be? (3
points) The max acceleration? (3 points) For all 12 points, you'll need to account for the mass of the added
rockets (you can assume their mass declines linearly over their burn and is O after they finish burning).
Answer:
The Estes C6-0 engine is a booster stage engine designed for model rocket flight and has to be used with a standard engine. This engine is for flights in rockets weighing less than 4 ounces, including the engines. Each package includes 3 engines, 4 starters and 4 plugs.
define moment of a force about a point and give the si unit of moment?
Answer:
Moment of a force is the product of the force and the perpendicular distance of force from axis of rotation.
The SI unit of force is newton (N).
Explanation:
Hope it helps you again!
A conductor is a material that ?
conducts electricity (keeps it running)
Answer:
The material which allow heat and electricity to pass through them are called conductor.
Eg. In solids- copper, silver, gold etc
In liquids The liquid that conduct electricity are solutions of acid bases and salts in water. For example: Solution of sulphuric acid ,hydrochloric acid in water conduct electricity. Vinegar contains acetic acid and lemon juice contain citric acid also conduct electricity.
Explanation:
If you like my answer than please mark me brainliest thanks
What is the maximum height above ground a projectile of mass 0.79 kg, launched from ground level, can achieve if you are able to give it an initial speed of 80.3 m/s?
From kinematic, the maximum height above ground a projectile of mass 0.79 kg, launched from ground level can achieve is 329 meters approximately.
The parameters given from the question are
mass m = 0.79kg
initial speed U = 80.3 m/s
Maximum height H = ?
The object will be going up under the influence of gravity. Acceleration due to gravity g = -9.8m/[tex]s^{2}[/tex]
At maximum height, final velocity V = 0
From kinematic formula, the best formula to use is
[tex]V^{2} = U^{2} - 2gH[/tex]
Substitute all the parameters into the equation
0 = [tex]80.3^{2}[/tex] - 2 x 9.8 x H
19.6H = 6448.09
H = 6448.09 / 19.6
H = 328.98 m
Therefore, the maximum height above ground a projectile of mass 0.79 kg, launched from ground level can achieve is 329 meters approximately.
Learn more here: https://brainly.com/question/14636414
What is the acceleration of a box weighing 596 N if a force of 777 N is applied to it?
Answer:
[tex]12.79 m/s^2[/tex]
Explanation:
1. Apply Newton's 2nd law:
[tex]F=ma[/tex]
2. Use the definition of weight to find the mass of the box:
[tex]W=mg=m=\frac{W}{g}[/tex]
3. Solve for acceleration in Newton's 2nd law and substitute for mass:
[tex]a=\frac{F}{\frac{W}{g} }[/tex]
4. Plug in the given values from the question and assume [tex]g=9.81m/s^2[/tex]:
[tex]a=\frac{777N}{\frac{596N}{9.81m/s^2} } } =12.79m/s^2[/tex]
What is the volume of 150g of a substance that has a density of 150g of a substance that has a density of 11.3g/cm3
Answer:
25.0 cm3
Explanation:
The volume is 25.0 cm3 .
The Greek root astro means "stars." Use the context clues to choose the correct definition of the word astronomer. According to the astronomer, the bigger the telescope, the more detail we can see in the images. O A. a person who studies astronauts O B. a person who studies the stars O C. a person who tells the future O D. a person who studies other people
Answer:
b, it's a pretty easy explanation
HELPP
When two forces are in opposite directions, and they are the exact same magnitude, the forces will _______.
a. subtract from each other
b. cancel out
c. go on infinitely
d. eventually reach equilibrium
Answer:
i think the correct answer is B. cancel out
When measuring the critical angle, in which medium do we need the refracted ray to be (air or glass)
Answer:
N1 sin theta1 = N2 sin theta2 Snell's Law
For the refracted ray to be reflected then sin theta2 = 1
N1 sin theta 1 = N2
Also N2 must be less than N1 for complete reflection
sin theta1 = N2/N1
If you are considering air and glass then N2 = 1 (for air)
sin theta1 = 1 / N2 where N2 must be for glass in this case
What is the effect of erosion?
A. New land forms at the mouth of a river.
B. New land forms at the top of a mountain.
C. A mountain forms.
D. A fossil is created.
A 67 kg soccer player uses 5100 kJ of energy during a 2.0 h match. What is the
average power produced by the soccer player?
The average power produced by the soccer player is 710 Watts.
Given the data in the question;
Mass of the soccer player; [tex]m = 67kg[/tex]Energy used by the soccer player; [tex]E = 5100KJ = 5100000J[/tex]Time; [tex]t = 2.0h = 7200s[/tex]Power; [tex]P =\ ?[/tex]
Power is simply the amount of energy converted or transferred per unit time. It is expressed as:
[tex]Power = \frac{Energy\ converted }{time}[/tex]
We substitute our given values into the equation
[tex]Power = \frac{5100000J}{7200s}\\\\Power = 708.33J/s \\\\Power = 710J/s \ \ \ \ \ [ 2\ Significant\ Figures]\\\\Power = 710W[/tex]
Therefore, the average power produced by the soccer player is 710 Watts.
Learn more: https://brainly.com/question/20953664
please help meee please please
Answer:
I think it's c but don't know for sure
what is democratic means in science
Answer:
relating to or supporting democracy or its principles.
Explanation: