How to calculate tension.
Answer:
Tension can be easily explained in the case of bodies hung from chain, cable, string
Explanation
uniform speed, tension; T = W.
T=m(g±a)
direction: fill in the blanks you can find your answer in the box provided below write your answer in blank provided.
1. Never wear open toed ______ while working with hot metal or welding apparatus.
2. The ______ must make a perfect seal around the ear to be effective
3. the ______ must be kept free of abrasions scrapes and nicks.
4. an apparatus worn over the mouth and nose to prevent inhalation of dust is ______.
5. when grinding and cutting _______ should be used.
6. the _______ makes you work with one hand only.
7. you should wear _______ to protect the feet from falling or rolling object.
8. the ______ prevent the entry of sparks between our clothes and body.
9. the ______ must be worn while inside the workshop.
10. the ______ is more convenient to use because it allows both hands to work freely.
Answer:
1) footwear (100% sure)
2) earmuffs (100% sure)
3) welding helmet
4) respirator (100% sure)
5) safety glasses
6) hand held shield (100% sure)
7) safety shoes (100% sure)
8) leather jacket
9) hard hat (100% sure)
10) safety harness (100% sure)
If f = 8. 0 n and m = 1. 0 kg, what is the tension in the connecting string? the pulley and all surfaces are frictionless. A)4. 1 n.
Answer:
a
Explanation:
yesirrr
How much does it cost to fix a rail road
Answer:
money
Explanation:
NO SCAMS
The Air Force is F 22 raptor fighter jets mass is 21,000 KG the F 22 is flying at a height of 26,000 miles what is its gravitational potential energyThe Air Force is F 22 raptor fighter jets mass is 21,000 KG the F 22 is flying at a height of 26,000 miles what is its gravitational potential energyThe Air Force is F 22 raptor fighter jets mass is 21,000 KG the F 22 is flying at a height of 26,000 miles what is its gravitational potential energyThe Air Force is F 22 raptor fighter jets mass is 21,000 KG the F 22 is flying at a height of 26,000 miles what is its gravitational potential energy
Answer:
2758.09
Explanation:
why is it important to follow the engineering design process before building a prototype
It is crucial to adhere to it since it provides a clear plan for how to identify the best solution to the issue in the most efficient manner.
You can experience your concept becoming real for the first time by creating a prototype. You can interact with, touch, and even destroy a prototype.
Why is it important to follow the engineering design process?Students that pursue careers in engineering and adhere to the steps of the design process are better able to think creatively because there is no one "correct answer." Through testing and ongoing improvement, engineers are encouraged to develop their own open-ended designs.
A working model of a solution is called a prototype. It is typically constructed using different materials than the final product, and it is typically less polished. A crucial stage in creating a final solution is creating a prototype, which enables the designer to test how the solution will function.
Learn more about the engineering design process here:
https://brainly.com/question/27896695
#SPJ2
Gilberto wants to take out a loan for college, but he does not want the interest to accrue until after he graduates. Which loan should he apply for?
People in accounting record, classify, summarize, analyze, and communicate a business's financial information for use in management decision-making.
Question 1 options:
True
False
Answer:
TRUE
Explanation:
hello nezuko its me bakugo
Question
The CNC is the primary interface between the machine operator and the machine. Is this statement TRUE or FALSE?
True
False
Answer:
True
Explanation:
The CNC is the primary interface between the machine operator and the machine.
a solid yellow line on your side of the center stripe means
It means:
"Do Not Pass." When parking near a corner, you may park your vehicle no closer than 20 feet from a crosswalk.
<3
How should you mark a component listed on the VCU form that
is not installed on the customer's vehicle?
A) Mark it N/A
B) Nothing
C) Mark it green
D) Mark it red
If too much amplification is applied to an audio signal, waveform distortion can occur causing a phenomenon called _____.
Answer: clipping
Explanation:
Which of the following is critical when performing maintenance?
A) informing a customer of the vehicles tire pressure.
B) informing a customer of a vehicle concern.
C) informing a customer of the vehicle’s manufacturer date.
D) informing the customer of maintenance promotions.
Which of the following best describes maintenance?
A) Making repairs as directed by a pinpoint test
B) The act of keeping a vehicle in good operating condition
C) servicing items that are worn
D) performing the service needed to fix a concern
Answer:
Equipment Reliability and Maintenance
SUBSTANTIAL CAPITAL investments, in the form of facilities and equipment, are required for manufacturing almost all goods of economic significance. The productivity of these investments is a fundamental element of competition among companies and nations. Events that slow or interrupt the manufacturing process or degrade the product impair the competitiveness of a manufacturing enterprise.
The term equipment reliability and maintenance (ERM) encompasses not only equipment, such as machines, tools, and fixtures, but also the technical, operational, and management activities, ranging from equipment specifications to daily operation and maintenance, required to sustain the performance of manufacturing equipment throughout its useful life. This chapter addresses all causes of diminished or degraded output. The panel considers ERM to be a significant factor in the competitiveness of manufacturing firms, an assessment supported by the case studies in the section on present practice (pp. 57-63).
Historically, the evolution of ERM can be traced from breakdown maintenance and repair to preventive maintenance to predictive maintenance. Breakdown maintenance and repair is the after-the-fact restoration of failed equipment. Preventive maintenance is the systematic servicing of equipment to reduce the possibility of failure. Predictive maintenance, in use in U.S. industry for only four or five years, is usually understood to involve the use of computer software to detect conditions that might eventually lead
Write the formula for calculating mechanical advantage for Levers, pulleys and wheels and axles.
Answer:
TO BE HONEST I DONE KNOW :D
13. Which stroke of the four-stroke cycle is shown in the above figure?
O A. Intake
B. Power
O C. Exhaust
O D. Compression
Mark for review (Will be highlighted on the review page)
<< Previous Question
Next Question >>
Answer:
the cycle is on the power just before the exhaust as both the valves are closed
Which principle of the software engineering code of ethics has gilbert violated?.
Answer:
Judgement
Explanation:
Gilbert is required by the Judgement Principle to "disclose those conflicts of interest that cannot reasonably be avoided or escaped." Since Gilbert professionally believes that the software meets specifications, secures documents, and satisfies user requirements, it is not clear if he violated any principle. However, he could have informed his client of his interest in the software and also presented other software packages of different companies from which the client could make its independent choice.
There are two methods to create simple robots. First, you can construct them by purchasing various individual components and assembling them using your design. Second, you can buy various robotic kits available in the market and assemble them. Which method do you think is the best and why? Do you think robotic kits are useful?
Please help, I will mark the best answer as brainliest
Answer:
second way
Explanation:
robotic kits are simple and easy to make
What happens when you put diesel in a gas engine.
Explanation:Since diesel fuel is thicker and denser than gasoline, the fuel pump will struggle to move the diesel/gasoline mixture through the system. Instead, it will clog up the fuel filter. And whatever amount of diesel that then makes its way to the engine will clog the fuel injectors, making them inoperable.
water 1°C.
12. Force is measured in
in the SI metric system.
Answer:
because metric units are decimal based they are easily converted by moving decimal points
23.6 Of the three possible modes by which a cutting tool can fail during a machining operation, which one is most preferable: (a) fracture failure, (b) gradual wear, or (c) temperature failure
Answer:
b) gradual wear
Explanation:
when heat is added or subtracted from an object its temperature _____________ or _____________
SUBJECT : SCIENCE
You are working on a large plant floor when you hear an explosion, which is followed by billowing smoke, debris and the fire alarm going off. Should you shelter in place ?
The football team has a total of 20 jerseys. There are 6
medium-sized jerseys. What percent of the jerseys are medium-sized jerseys?
Answer:
89
Explanation:
Dislocations have a major effect on the plastic deformation of metals, but do not play a major role in the mechanical behaviour of ceramics. Why?.
Dislocation often plays a major role in plastic deformation of the material because material can be increased by plastic deformation. The number of dislocation often brings about motion depicts plastic deformation.
Dislocations are gotten and move when a stress is applied. The motion of dislocations allows slip and then plastic deformation takes place.
The dislocations often move along the densest planes of atoms in a material. This is due to the fact that the stress needed to shift the dislocation rises with the spacing between the planes.
Dislocations play an essential role in the plastic deformations of crystalline materials as they hinder the synchronized breakage of bonds between atoms in materials.
Learn more from
https://brainly.com/question/15261205
Working upward from the stove, the worker just installed K2654. What part should be installed next?
Answer: adapter J44493
Explanation: it’s above the previous
What is the primary difference between the process of lost-wax casting as practiced in ancient times and that same process today
Answer:
Today, multiples can be created from the process. high-relief projects boldly from the background, and elements of high-relief may be in the round, unattached to the background.
what is the name of the flap on the horizontal stabilizer
Swag Answer:
They are called elevators
Swag Explanation :
They are called that for whatever reason mAsqUErADE MaSquerade tHat iS mY nAmE
How is the purple stem trait variation similar to the tougue-rolling trait variation
Answer:
Explanation:
Species
A group of organisms that can reproduce and produce fertile offspring (children that can reproduce themselves)
Trait
Characteristic of an organism (body part, behavior, chemical, produced)
Variation
Differences in trait expression
Inherited trait
Trait passed from parent to children (offspring)
Acquired Trait
Traits learned by/changed in an individual from interaction with the environment
Protein
A special type of biological molecule (only found in organisms) that organisms use to build, maintain, and operate the cells/tissues/organs of their bodies. (Like a prepared meal)
DNA
The biological molecule that serves as the chemical instructions or blueprints for building all the proteins an organism needs to build its body and survive. (Like words in a cookbook)
Gene
A section of a DNA molecule that serves as the instructions to build one protein. (Like one recipe in a cookbook)
Chromosomes
Large packages of coiled DNA molecules that are passed from parents to children. (Like different chapters on a cookbook)
Pollen
Flowering plant sperm (male sex cell)
Explanation:
work of energy dimersional formula
Answer:
Common symbols
W
SI unit
joule (J)
Other units
Foot-pound, Erg
In SI base units
1 kg⋅m2⋅s−2
Derivations from
other quantities
W = F ⋅ s
W = τ θ
Dimension
M L2 T−2
Explanation:
please Mark my answer in brainlist