Biology 3.01
1. What differences can you see when you compare the nucleus of a dividing cell with that of a non-dividing cell?

Answers

Answer 1

Answer:

chromosomes will be seen in the nucleus of the dividing cell because they are visible when a cell is dividing apposed to non-dividing cells.

Explanation:

Answer 2

Answer:

chromosomes will be seen in the nucleus of the dividing cell because they are visible when a cell is dividing apposed to non-dividing cells.

Explanation:


Related Questions

Match the organism with the biome where you would expect to see it.

Answers

Answer:

What are the 26 states of matter?

Bose–Einstein condensate.

Fermionic condensate.

Degenerate matter.

Quantum Hall.

Rydberg matter.

Rydberg polaron.

Strange matter.

Superfluid

What would most likely be the effect if an experimental design specifies only an experimental group?
1. The experiment will lack a control.
2. The experiment will lack a purpose.
3. The experiment will not be repeatable.
4. The experiment will not have variables.

Answers

I think it’s 4. But not sure.

Coral reefs are home to a quarter of all marine species on earth. what is one consequence of declining coral reefs?

Answers

Answer:

Marine life decreases and the food chain will have e a drastic change as well

is plantain a tuber crop​

Answers

Answer:

yes

Explanation:

Another fact is that the Banana plant is one of those perennial plants whose parts can be used as food, starting from its fruits-the bananas to its roots tubers. Banana tubers have been used as food mostly in states like Uganda, Indonesia, and also India.

The himalayan mountains were formed baecause of a
a.convergent boundary
B.transform fault
c.hot spot
D.divergent boundary​

Answers

Explanation:

because of convergent fault (B).

hope this helps you.


An animal cell that is surrounded by fresh water
will burst because the osmotic pressure causes
A. water to move into the cell.
B. water to move out of the cell.
C. solutes to move into the cell.
D. solutes to move out of the cell.

Answers

Answer:A

Explanation:

The osmotic pressure in the animal cell is higher than that in the fresh water.

The flow of water is from low osmotic pressure to high osmotic pressure.

The water moves into the cell and then bursts.

when a plant sweats or emits water is called

Answers

Answer:

Overall, this uptake of water at the roots, transport of water through plant tissues, and release of vapor by leaves is known as transpiration

Explanation:

transpiration

Hope this helped you- have a good day bro cya)

Plants absorb carbon during which process?
A. Transpiration
B. Absorptive Synthesis
C. Respiration
D. Photosynthesis

Answers

Answer:

photosynthesis

Explanation:

this is because, plants use the carbon dioxide to prepare their own food through photosynthesis

PLS ANSWER NOW THANK YOU :):) NEED HELP QUICKIn
1-2 sentences, describe the process of deposition and explain how it creates new landforms. :):)

Answers

Deposition is the geological process in which sediments, soil and rocks are added to a landform or landmass. Simply when layers of eroded material pile to create new landforms. For example, coastal deposition is how beaches are formed.

The geological process of deposition involves the addition of sediments, soil, and rocks to a landform or landmass. when eroded debris is piled up in layers to produce new landforms.

What is deposition?

A deposition is testimony made under oath and taken down in writing by an authorized officer of the court, typically in an out-of-court setting and before trial.

Depositions are usually taken from key witnesses, but can also involve the plaintiff or defendant, to give the involved parties a fair preview of all the evidence.

The individual making the deposition is known as the deponent and false statements can carry civil and criminal penalties.

Therefore, The geological process of deposition involves the addition of sediments, soil, and rocks to a landform or landmass. when eroded debris is piled up in layers to produce new landforms.

To learn more about deposition, refer to the link:

https://brainly.com/question/2507231

#SPJ2

why is it important to know the beginning of the universe and the solar system?​

Answers

Answer:

In the process of exploring the birth of the earliest galaxies in the universe, to understand the planetary systems, explore planets that are capable of supporting life, and to learn whether life began elsewhere in the solar system have helped us advance and build our civilization.

research historical and present ecosystem services in tonle sap. what services depend on size and timing of annual floods? how have human activities affected those in the past

Answers

Explanation:

A floods timming is affected

What was the universe immediately before the Big Bang occurred?

a black hole

a singularity

a super spiral galaxy

a mass of antimatter

Answers

the answer is a black hole

The universe immediately before the Big Bang occurred as a black hole. Thus, the correct option is A.

What is the Big bang?

The big bang may be defined as the cosmic explosion that significantly marked the initiation of the universe according to the big bang theory. The origin of the universe is explained by the Big Bang theory.

At initial, the whole universe appeared like a black hole where no life is present. It was all the dark around each and every corner. The universe was an infinite stretch of ultrahot, dense material and everything consisted of empty space.

Before the big bang, the universe was almost infinitely small, dark, and a size less than a trillionth of a second. It was a period of inflation which is followed by a more catastrophic event which was violent, and known as the period of expansion.

Therefore, the universe immediately before the Big Bang occurred as a black hole. Thus, the correct option is A.

To learn more about the Big bang theory, refer to the link:

https://brainly.com/question/1638518

#SPJ2

Lwhat is the length between basepairs in nieocleoid of e.coli

Answers

Answer:

As the length of a complete turn of a double helix is 3.4 nm long and each of them contains 10 base pairs, we can determine the distance between two consecutive pairs by simply dividing the length of the complete turn by the number of base pairs in it. The distance 3.410nm i.e. 0.34 nm. Note: Even though E.

what occurs if resources within a population are limited

Answers

Answer:

Explanation:

As resources are depleted, population growth rate slows and eventually stops,This is known as logistic growth.

Which term can avoid traveling through a solid, a liquid, or a gas?

Answers

The term that can avoid traveling through a solid, a liquid, or a gas is "electromagnetic radiation" or "light."

Electromagnetic radiation: Electromagnetic radiation refers to the propagation of energy in the form of waves or particles through space. It includes various types of radiation, such as visible light, radio waves, microwaves, X-rays, and gamma rays.Traveling through solids: Solids have a tightly packed arrangement of atoms or molecules, which makes it difficult for electromagnetic radiation to pass through them. The particles in solids interact with the radiation and absorb or scatter it, preventing its transmission.Traveling through liquids: Liquids have a less rigid arrangement of particles compared to solids. While some electromagnetic radiation can pass through liquids, it may be partially absorbed or scattered due to interactions with the liquid molecules.Traveling through gases: Gases have widely spaced particles, allowing electromagnetic radiation to travel more freely compared to solids and liquids. However, certain gases can still interact with specific types of radiation, such as absorbing certain wavelengths or causing scattering.

Overall, electromagnetic radiation, or light, has the unique property of being able to propagate through a vacuum, which means it can travel through space where there is no matter present, as well as through various mediums, including gases, liquids, and solids.

For more such question on radiation

https://brainly.com/question/10328401

#SPJ8

Hello,

Can someone re-word this well for 50 points?

"The lab allowed me to model and observe stream and river processes. Using a virtual model, I compared low and high velocity streams or rivers, low and high gradient streams or rivers, and low and high volume streams or rivers. I found that higher velocity streams or rivers can cause more erosion, as do higher gradient and higher volume streams or rivers. Not only did these factors move more small sediment, they also moved larger pieces of sediment."

Answers

Answer:

Explanation:

This lab here allowed me to model and notice  the stream and river processes. I found that higher celerity streams or rivers can cause more abrasion, as do higher gradient and higher volume streams or rivers. Not only did these factors move more small sediment, they also moved bigger pieces of the sediment rock.

What organ system is responsible for Gaseous exchange between external environment and blood

Answers

Answer: That would be the Respiratory System.

Explanation:

Answer:

the respiratory system

Explanation:


Explain why it is not possible to make a conclusion from
this experiment.

Answers

Answer:

impossible every experiment have a conclusion

Chloroplasts and mitochondria are both involved in energy conversion in cells and share many similarities. Differentiate between chloroplasts and mitochondria. Choose ALL of the characteristics that apply ONLY to chloroplasts.

A) contain DNA B) found in plants C) contain pigments D) used in photosynthesis E) used in aerobic respiration

Answers

Explanation:

contain pigments c and used in photosynthesis

The main difference between chloroplasts and mitochondria are contained pigments, used in photosynthesis. The correct options are C and D.

What are chloroplast and mitochondria?

The organelle found inside the cells of plants is known as a chloroplast. Additionally, there are particular algae that serve as the photosynthesis sites, where the sun's energy should be converted into chemical energy for the sake of growth. In addition to being employed in photosynthesis, it also contains pigments.

Membrane-bound cell organelles known as mitochondria (mitochondrion, singular) produce the majority of the chemical energy required to fuel cellular metabolic operations.

Therefore, the correct options are C) containing pigments and D) used in photosynthesis.

To learn more about chloroplast and mitochondria, refer to the link:

https://brainly.com/question/15033628

#SPJ2


1) Why does the addition of dideoxynucleotides to the DNA sequencing reaction cause DNA synthesis to stop after the modified nucleotide is added?
A)Because once a modified nucleotide is incorporated into the DNA, there is no free 5'OH group to attach the next nucleotide being added.
B)Because once a modified nucleotide is incorporated into the DNA, there is no free 3'PO4-group to attach the next nucleotide being added.
C)Because once a modified nucleotide is incorporated into the DNA, there is no free 3'OH group to attach the next nucleotide being added.
D)Because once a modified nucleotide is incorporated into the DNA, there is no free 5'PO4-group to attach the next nucleotide being added.

Answers

In Sanger sequencing, once a modified nucleotide is incorporated into the DNA, there is no free 3'OH group to attach the next nucleotide being added. This phenomenon is useful to sequence a polynucleotide chain.

Dideoxynucleotides (ddNTPs) are nucleotide inhibitors of the DNA polymerase, it is for that reason that they are used in Sanger sequencing.

The ddNTPs are similar to natural deoxynucleotides used by cells during ADN replication; however, ddNTPs lack a hydroxyl (OH) group on the 3’ carbon of the deoxyribose.

In consequence, once a ddNTP is added, DNA synthesis cannot progress, thereby this phenomenon can be used to determine the order of nucleotides during the elongation of a polynucleotide DNA chain.

Learn more in:

https://brainly.com/question/14242676

Which statement is true about dichotomous keys?(1 point)

Dichotomous keys can only be used to classify organisms based on their habitats.

Dichotomous keys can only be used to classify organisms based on their observable traits.


Dichotomous keys can only be used if the name of the species is unknown.


Dichotomous keys can only be used if the name of the species is known.

Answers

The dichotomous key is a classification tool based on morphological characteristics. The correct option is B. Dichotomous keys can only be used to classify organisms based on their observable traits.

What is a Dichotomous key?

A dichotomous key might be considered a significantly useful tool to classify organisms.

The key provides an easy and fast way for identification by describing different morphological observable traits, leading you to the correct taxonomic classification.

The term dichotomous refers to how information is provided. You will always have two options (a and b, or 1 and 2), and you will have to choose one of them according to the characteristics of your organism.

Each time you choose an option, it leads you to the following description, which gets more specific each time.

Probably you might need an atlas or a dictionary to understand some of the technical terminologies.

You will also need to carefully observe your specimen, to get to distinguish different traits. If the specimen is too small you might need a loup.

The correct statement is B. Dichotomous keys can only be used to classify organisms based on their observable traits.

You can learn more about dichotomous key at

brainly.com/question/4292942

brainly.com/question/1938800

Answer:   1.  they lack roots  2.  Dichotomous keys can only be used to classify organisms based on their observable traits.  3.  domain  4.  Both focus on illustrating taxonomic relationships between organisms.  5.  domains

Explanation: just took the quick check made 5/5 hope this helps :)

convert 30 ft to cm .......................................

Answers

914.4 cm……………………………..

Can you help me with this question?

Answers

Answer:

Explanation:

I DONT KNOW THE ANSWER

Describe the necessary steps from observing a specimen with 4X objective lens to observing the same specimen with 100X objective lens under the light microscope.

Answers

In order to observe a specimen under 4X objective lens, the following procedures must be observed:

Set up the microscope ensuring that the lens have been adequately cleaned and the light source is workingMount the object on a slide and place the slide on the stage of a clean microscope.Switch the revolving nose piece to ensure that the 4X objective is in positionSwitch on the light sourceBring the object into focus by using coarse and fine adjustment knobs.Ensure that the image of the object is centered on the stage.

In order to observe the same specimen under the 100X objective:

Switch the revolving nose piece to fix the 100x objective in place.Only use the fine adjustment knob to bring the image into focusIf the image will not resolve properly, a few drops of immersion oil may be applied to the slide to improve resolution.

More on microscopy can be found here: https://brainly.com/question/13137774

Which of the following materials would not normally be found in glomerular filtrate?

A. Glucose
B. Urea
C. Water
D. Protein

Answers

Answer:

B

Explanation:

why is the carbon cycle important to marine science. 4-5 sentences

Answers

The ocean plays a critical role in carbon storage, as it holds about 50 times more carbon than the atmosphere. Two-way carbon exchange can occur quickly between the ocean's surface waters and the atmosphere, but carbon may be stored for centuries at the deepest ocean depths

A person jogging from the forest to the office covers the 6,800
meters in 2 hours. Their speed is not constant and they slow down
and speed up at various times. What is their average velocity?
Round the answer to the hundredths place if necessary.
a 1.9 m/s north
b. Impossible to calculate since the speed wasn't constant.
C. 0.9420/s north
d. 56.67 m/s north
e. 1.34 m/s north
f. 0.56 m/s north

Answers

Total displacement=6800mTime=2h=7200s

[tex]\\ \sf\longmapsto Avg\: Velocity=\dfrac{Total\: displacement}{Total\:time}[/tex]

[tex]\\ \sf\longmapsto Avg\: Velocity=\dfrac{6800}{7200}[/tex]

[tex]\\ \sf\longmapsto Avg\: Velocity=0.9420m/s[/tex]

Answer:

0.9420m/s north

Explanation:

Given,

Displacement (Total) = 6800 metres(m)

Time = 2 hours

We need to convert hours to seconds.

2 hours = 7200 seconds

We know,

[tex]\sf\longmapsto \: Average \: velocity = \frac{Total \: Displacement}{Total \: time} [/tex]

Let's start solving!

[tex]\sf\longmapsto \: Average \: velocity = \frac{6800 \: metres}{7200 \: seconds} [/tex]

[tex]\sf\longmapsto \: average \: velocity = 0.9420\: m/s[/tex]

whut is a biofultproduc

Answers

“Bioproducts or bio-based products are materials, chemicals and energy derived from renewable biological resources.”
I don’t know if this is what you were asking, but I will put it here just in case.

One person pulls on a rope with a force of 400 N to the right. Another
person pulls on the opposite end with a force of 600 N to the left. What is
the net force?

Answers

600-400= 200N to the left.

Two forces are applied on the rope of the magnitude 400N to the right and 600N to the left, as a result of these forces the net force on the object will be 200N. Thus, the correct option is A.

What is Net force?

Net force is the resultant force of the total force which is being applied on an object. It is the sum total of the effect of all the forces on an object. Forces which are applied in opposite directions cancel out each other.

If the net force applied on an object is not zero, then it can be said that the object is not in equilibrium, and thus Newton's Second Law can be used to determine the motion of the object.

Here, two forces of different magnitudes and in opposite directions are applied on the rope to pull the rope. The forces are 400N to the right and 600N to the left.

As a result of these forces, the net force applied on the rope can be calculated by:

Net force = Difference between the forces applied in opposite directions or the sum of the forces which are applied in same direction

Net force = 600N (force applied to the left) - 400N (force applied to the right)

Net force = 200 N and the direction will be left as the magnitude is more in left direction than right

Therefore, the correct option is A.

Learn more about Net force here:

https://brainly.com/question/13410291

#SPJ2

Question 8
1 pts
s
When a person jumps off the diving board and they spread their whole body out in the
air, they will hit the water with a loud smack. This is called a "belly flop". This is due to a
unique property of water called
O capillary action
O surface tension
Odensity
O temperature
< Previous
Next >

Answers

Answer:

Surface Tension

Explanation:

Other Questions
in the hobbitElrond discovers that the swords from the trollsare famous, special bladesare cursed with an evil spellwere made by ancient trolls (X^2 -6x -20)/(x+2)Use long division PLEASE HELP ME WITH EDGE UNIT TEST!!!! EARTH AND SPACE SCIENCE!!!!! At which location would an objects weight be the greatest?on Plutoon Earthon the Sunon the moon Bob's gift shop sold a record number of cards for Mother's Day. One salesman sold 42cards, which was 4% of the cards sold for Mother's Day. How many cards were soldfor Mother's Day?Multiply/scale up to solve.cards421004percent What was the number one disease brought by Spanish explorers to the new world from Europe?A: Small PoxB: MeaslesC: Chicken Pox how do anion formation and valence electrons relate? true or false Typically, a plot begins with conclusions that introduce the characters and the conflict they face. what is 7.5% less than 120 Dos oraciones con esbrona porfas Liu wants to better understand how to motivate employees at her company. Because she knows there is no single leading theory accepted by everyone on what motivates people, she looks into the top four perspectives: content, process, reinforcement, and ______. Multiple choice question. If Team Member must take medications at work, which of the following actions is appropriate?(Select all that apply.)A. Never open a medication near food prep areas or food holding areasB. Take medication only in break areaC. Keep medications in a locker Help me please Is it necessary or important to have 3 branches of government? Why or why not please use your own word Someone pls help me I will make you brain Which of the following could possibly beused to describe the number of peoplewearing braces in this room?A. Whole NumbersB. Negative NumbersC. Rational NumbersD. Irrational Numbers What does a countrys gross domestic product measure?A.the total number of infrastructure improvements produced each yearB.the level of educational achievement by a countrys citizensC.the number of different products exported by a countrys industriesD.the value of all goods and services produced by a country during a yearPlease select the best answer from the choices providedABCD what american invention aided the textile industry If software can be affected by viruses, what do you think hardware can be affected by HELP NEED ANSWER IN AT LEAST 5 MINUTES will give brainliest All of the following are apart of the cell theory except: O All cells carry out the life process O All cells within multicellular organisms are identical O All organisms are made of one or more cells O All new cells come from pre-existing cells On Mrs. Sean's desk,there are pink and yellowmarkers. The ratio of pinkmarkers to total markersis 1:3. If there are 16yellow markers, then howmany markershare pink? nice life everyone am out of here