Answer:
higher
Explanation:
as CH3CH2OH has an O-H bond, it has significantly more IMF caused by the hydrogen bond between CH3CH2OH molecules. This means its harder to pull apart CH3CH2OH molecules as they are very attracted to one another, thereby increasing the boiling point.
a 25.0 ml sample of hbr solution is titrated with a 0.115 m ch3nh2 solution. at equivalence point, the ph of the solution will be ______.
At equivalence point, the pH of the solution will be acidic, likely around 4-5. The exact pH value would depend on the dissociation constant of the salt, which is not provided in the given information.
At the equivalence point of the titration between a 25.0 mL sample of HBr solution and a 0.115 M CH3NH2 solution, the moles of the acid (HBr) and base (CH3NH2) are equal. To determine the pH at the equivalence point, first calculate the moles of CH3NH2 needed to neutralize the HBr:
moles of HBr = moles of CH3NH2
Since we don't know the initial concentration of HBr, we can represent it as C:
C × 0.025 L = 0.115 mol/L × V_CH3NH2
Solve for V_CH3NH2:
V_CH3NH2 = (C × 0.025 L) / 0.115 mol/L
At equivalence, the CH3NH2 will be fully converted into its conjugate acid, CH3NH3+ (methylammonium ion). Now we can use the Henderson-Hasselbalch equation to find the pH:
pH = pKa + log ([A-] / [HA])
For CH3NH3+, the pKa value is 10.64:
pH = 10.64 + log (0 / (C × 0.025 L))
Since the log of 0 is undefined, the pH will be equal to the pKa of the conjugate acid:
pH = 10.64
At the equivalence point, the pH of the solution will be 10.64.
Learn more about CH3NH2 here: brainly.com/question/9825885
#SPJ11
Calculate the wavelength of a 50.0 kg runner moving at 2.00 m/s.
\Calculating the wavelength of a runner weighing 50.0 kg and travelling at a speed of 2.00 m/s is not easy. Direct calculation of the runner's wavelength is not possible.
We must first determine the frequency of the runner's motion in order to determine the wavelength of the runner. The frequency of a motion is the number of times it occurs in a certain amount of time. Hertz (Hz) is the unit of measurement.
The formula f = v/, where f is the frequency, v is the velocity, and is the wavelength, can be used to determine the frequency of a runner's motion. In this instance, the wavelength is unknown and the velocity is 2.00 m/s.
With the specified values entered, we have = 2.00 m/s / 50.0 kg, or 0.04 m. This is the runner's motion's wavelength.
Learn more about wavelength at :
https://brainly.com/question/31143857
#SPJ1
Which one of the following molecules is not possible?a.BrF5b.NF5c.CH₂Cl2d. TeF6e.OF 2
TeF6 is the correct response. This is because atoms typically form molecules with eight electrons in each valence shell, in accordance with the octet rule.
TeF6 has six fluorine atoms, however there aren't enough valence electrons on the tellurium atom to create a stable molecule.
Atoms create and break chemical bonds during chemical reactions. Reactants are the molecules that initiate a chemical reaction, and products are the compounds that are created as a result of the reaction.
Combustion, breakdown, single-replacement, double-replacement, and combinations are the five fundamental types of chemical reactions. You can classify a reaction into one of these groups by studying the reactants and products.
While copper and oxygen go through a synthesis process, calcium sulphate goes through a double displacement reaction. Carbon and copper oxide undergo one displacement reaction.
It follows that the first reaction is a double displacement reaction, the second is a synthesis process, and the third is a single displacement reaction.
Learn more about double displacement reaction here
https://brainly.com/question/30892840
#SPJ11
rank the following radicals in order of decreasing stability, putting the most stable first.i. CH3CH₂ ii. H₂C=CHCH₂ iii. CH3CHCH3 IV. (CH3)3CA. II>IV>III>IB. III>II>IV>IC. IV>III>II>ID. IV>III>I>II
The following radicals in order of decreasing stability, putting the most stable first:
i. CH3CH₂ (Primary Radical)
ii. H₂C=CHCH₂ (Allylic Radical)
iii. CH3CHCH3 (Secondary Radical)
iv. (CH3)3C (Tertiary Radical)
Radicals are generally more stable when they have more substituents attached to the carbon atom with the unpaired electron. This is because the electron delocalization helps stabilize the molecule. The order of stability for these radicals is:
Tertiary (IV) > Secondary (III) > Allylic (II) > Primary (I)
So, the correct answer is: IV>III>II>I (Option D).
To know more about electron delocalization :
https://brainly.com/question/31179584
#SPJ11
The following radicals in order of decreasing stability, putting the most stable first:
i. CH3CH₂ (Primary Radical)
ii. H₂C=CHCH₂ (Allylic Radical)
iii. CH3CHCH3 (Secondary Radical)
iv. (CH3)3C (Tertiary Radical)
Radicals are generally more stable when they have more substituents attached to the carbon atom with the unpaired electron. This is because the electron delocalization helps stabilize the molecule. The order of stability for these radicals is:
Tertiary (IV) > Secondary (III) > Allylic (II) > Primary (I)
So, the correct answer is: IV>III>II>I (Option D).
To know more about electron delocalization :
https://brainly.com/question/31179584
#SPJ11
Of the following, which forms a neutral solution? Assume all acids and bases are combined in stoichiometrically equivalent amounts. Select the correct answer below: HCN(aq)+KOH(aq)⇌KCN(aq)+H2O(l) H2S(aq)+2LiOH(aq)⇌Li2S(aq)+2H2O(l) CH3CO2H(aq)+NaOH(aq)⇌NaCH3CO2(aq)+H2O(l) 2HNO3(aq)+Sr(OH)2(aq)⇌Sr(NO3)2(aq)+2H2O(l)
Answer:
2HNO3(aq)+Sr(OH)2(aq)⇌Sr(NO3)2(aq)+2H2O(l)
Explanation:
The transfer of one H+ ion and one OH- ion occurs in this reaction, and the resulting solution is neutral. the correct answer is:
CH_3CO_2H(aq) + NaOH(aq) ⇌ NaCH3_CO_2(aq) + H_2O(l)
What is the point of a neutral solution?Neutral solutions have the same concentrations of hydrogen and hydroxide ions. A sodium chloride solution or a sugar solution could be used as a neutral solution. A neutral solution has a pH of 7. Water is another common material with a pH of neutral.
The concentrations of H+ and OH- ions in a solution must be equal for it to be neutral.
When an acid and a base are combined in stoichiometrically equal amounts, the only reaction that produces a neutral solution is:
CH_3CO_2H(aq) + NaOH(aq) ⇌ NaCH_3CO_2(aq) + H_2O(l)
This is a neutralization reaction that occurs between acetic acid (CH_3CO_2H) and sodium hydroxide (NaOH), producing sodium acetate (NaCH_3CO_2) and water (H_2O).
To know more about the neutralization reaction visit:
https://brainly.com/question/15255706
#SPJ1
Please help with these 3 questions!!!
1) How many atoms are contained in 0.55 g of Ni?
2) How many moles of Ti are in 5.50 × 1024 atoms of Ti?
3) How many atoms are in 3 molecules of H2CO?
Answer:
1. To determine the number of atoms in 0.55 g of Ni, we need to use the molar mass of Ni and Avogadro's number. The molar mass of Ni is 58.69 g/mol.
First, we need to find the number of moles of Ni in 0.55 g:
moles of Ni = mass of Ni / molar mass of Ni
moles of Ni = 0.55 g / 58.69 g/mol
moles of Ni = 0.009367 mol
Next, we can use Avogadro's number to convert from moles to atoms:
number of atoms = moles of Ni x Avogadro's number
number of atoms = 0.009367 mol x 6.022 x 10^23 atoms/mol
number of atoms = 5.63 x 10^21 atoms
Therefore, there are 5.63 x 10^21 atoms in 0.55 g of Ni.
2. To determine the number of moles of Ti in 5.50 x 10^24 atoms of Ti, we need to use Avogadro's number.
First, we need to convert the number of atoms to moles:
moles of Ti = number of atoms of Ti / Avogadro's number
moles of Ti = 5.50 x 10^24 atoms / 6.022 x 10^23 atoms/mol
moles of Ti = 9.13 moles
Therefore, there are 9.13 moles of Ti in 5.50 x 10^24 atoms of Ti.
3. To determine the number of atoms in 3 molecules of H2CO, we need to use the molecular formula of H2CO and Avogadro's number.
The molecular formula of H2CO indicates that there are 5 atoms in each molecule (2 hydrogen atoms, 1 carbon atom, and 2 oxygen atoms).
To determine the total number of atoms in 3 molecules of H2CO, we can multiply the number of atoms per molecule by the number of molecules:
total number of atoms = number of atoms per molecule x number of molecules
total number of atoms = 5 atoms/molecule x 3 molecules
total number of atoms = 15 atoms
Therefore, there are 15 atoms in 3 molecules of H2CO.
Write the charge and full ground-state electron configuration ofthe monatomic ion most likely to be formed by each of thefollowing. (Type your answer using the format 1s2 2s2 2p1 for1s2 2s22p1. Enter [H]+ for H+ and [O]2- forO2-.)(a) Nachargeelectron configuration(b) Brchargeelectron configuration(c) Rbchargeelectron configuration
(a) Na+ has a charge of +1 and a full ground-state electron configuration of 1s2 2s2 2p6.
(b) Br- has a charge of -1 and a full ground-state electron configuration of 1s2 2s2 2p6 3s2 3p6.
(c) Rb+ has a charge of +1 and a full ground-state electron configuration of 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s1.
(a) Na
Charge: +1
Electron configuration: [Na+] 1s2 2s2 2p6
(b) Br
Charge: -1
Electron configuration: [Br-] 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6
(c) Rb
Charge: +1
Electron configuration: [Rb+] 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s1
(a) Na+ has a charge of +1 and a full ground-state electron configuration of 1s2 2s2 2p6.
(b) Br- has a charge of -1 and a full ground-state electron configuration of 1s2 2s2 2p6 3s2 3p6.
(c) Rb+ has a charge of +1 and a full ground-state electron configuration of 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s1.
To learn more about charge, click here:
brainly.com/question/14713274
#SPJ11
identify the transition metal ion and the number of electrons with the following electron configuration, [ar]4s03d7.
The transition metal ion with the electron configuration [Ar]4s0 3d7 is Mn²⁺, and it has 25 electrons.
How to determine the electron configuration of an element?To identify the transition metal ion and the number of electrons with the electron configuration [Ar]4s0 3d7,
1. Identify the core electron configuration: [Ar] represents the electron configuration of argon, which has 18 electrons.
2. Count the number of valence electrons: In this case, 4s0 has 0 electrons, and 3d7 has 7 electrons.
3. Add the core and valence electrons to find the total number of electrons: 18 (core) + 7 (valence) = 25 electrons.
The element with 25 electrons is manganese (Mn). However, since it's a transition metal ion, we need to identify the charge of the ion. The electron configuration of the neutral Mn atom is [Ar]4s2 3d5. Comparing this with the given electron configuration [Ar]4s0 3d7, we see that 2 electrons are missing from the 4s orbital. This indicates a +2 charge on the Mn ion.
To know more Electron Configuration:
https://brainly.com/question/29416284
#SPJ11
bao2, barium peroxide, decomposes when heated to give bao and o2. write a balanced equation for this reaction. if 0.500 mol of bao2 is decomposed, the number of moles of o2 formed is __.
The balanced equation for the decomposition of barium peroxide (BaO2) is 2 BaO2 → 2 BaO + O2 . This means that for every 2 moles of BaO2 that decompose, 1 mole of O2 is formed. Therefore, if 0.500 moles of BaO2 decompose, the number of moles of O2 formed would be: 0.500 moles BaO2 × (1 mole O2 / 2 moles BaO2) = 0.250 moles O2
The balanced equation for the decomposition of barium peroxide (BaO2) is 2 BaO2 → 2 BaO + O2, which indicates that 2 moles of BaO2 decompose to yield 2 moles of barium oxide (BaO) and 1 mole of oxygen gas (O2). This means that the mole ratio between BaO2 and O2 is 2:1.
If we have 0.500 moles of BaO2 that decompose, we can use this mole ratio to calculate the number of moles of O2 formed. By multiplying 0.500 moles of BaO2 by the conversion factor of 1 mole O2 per 2 moles BaO2 (from the balanced equation), we can determine the amount of O2 produced:
0.500 moles BaO2 × (1 mole O2 / 2 moles BaO2) = 0.250 moles O2
Therefore, 0.500 moles of BaO2 would yield 0.250 moles of O2 through the decomposition reaction according to the balanced equation.
Learn more about barium peroxide here:
https://brainly.com/question/188392
#SPJ11
using the vsepr model, the electron pair arrangement around the central bromine atom in brf4- is __________.
The molecular geometry around the central bromine atom in BrF4- is trigonal bipyramidal.
In the BrF4- ion, the central bromine atom is bonded to four fluorine atoms and has one lone pair of electrons. To determine the electron pair arrangement around the central bromine atom using the VSEPR (Valence Shell Electron Pair Repulsion) model, we need to first draw the Lewis structure of the molecule:
Bromine (Br) has 7 valence electrons, while each fluorine (F) atom has 7 valence electrons. The negative charge on the ion (-1) indicates the addition of an extra electron, so there are a total of 36 valence electrons (7 + 4(7) + 1 = 36).
The Lewis structure of BrF4- can be represented as:
F F
| |
F--Br--F
| |
F -
where "-" represents the lone pair of electrons on the Br atom.
Using the VSEPR model, we can determine the electron pair arrangement around the central bromine atom by considering both the bonding pairs and the lone pair of electrons. In this case, there are 5 electron pairs around the central bromine atom (4 bonding pairs and 1 lone pair). The electron pair geometry is therefore trigonal bipyramidal.
However, we also need to consider the molecular geometry, which takes into account only the position of the atoms around the central atom (not the lone pair of electrons). The bonding pairs in BrF4- are all bonded to the central atom, so the molecular geometry is the same as the electron pair geometry.
learn more about VSEPR model here:
https://brainly.com/question/29022281
#SPJ11
Can water molecules evaporate?
Yes, water molecules can evaporate. Evaporation is a physical process where a liquid turns into a gas, and it occurs when the molecules of the liquid gain enough energy to break free from their bonds and escape into the air. When water is exposed to air, some of its molecules will gain enough energy to evaporate and become water vapor in the atmosphere. This is why clothes dry when hung outside, and why puddles disappear on a hot day. The rate of evaporation depends on several factors, including temperature, humidity, and air movement, among others.
Have a Great Day!-
list the elements in the compound cf2br2 in order of decreasing mass percent composition.
The elements in CF2Br2 in order of decreasing mass percent composition are: Bromine (Br) > Carbon (C) > Fluorine (F), Bromine has the highest mass percent composition, followed by Carbon and then Fluorine.
CF2Br2 is a compound made up of carbon, fluorine, and bromine. To determine the order of decreasing mass percent composition, we need to calculate the mass percent of each element in the compound.
First, we need to find the molecular weight of CF2Br2 by adding the atomic weights of each element:
Molecular weight of CF2Br2 = (1 x C) + (2 x F) + (2 x Br) = 12.01 + 2(18.99) + 2(79.90) = 219.79 g/mol
Next, we can calculate the mass percent of each element in the compound:
Mass percent of C = (1 x 12.01 g/mol / 219.79 g/mol) x 100% = 5.46%
Mass percent of F = (2 x 18.99 g/mol / 219.79 g/mol) x 100% = 17.26%
Mass percent of Br = (2 x 79.90 g/mol / 219.79 g/mol) x 100% = 77.28%
Therefore, the elements in the compound CF2Br2 in order of decreasing mass percent composition are Br (77.28%), F (17.26%), and C (5.46%).
learn more about mass percent here:
https://brainly.com/question/5394922
#SPJ11
What is the change in Gibb's Free energy for the following reaction at 25 °C?
3A + B
This equation can be used to determine the specific change in Gibbs free energy:
ΔG° = ΔH° - TΔS°
where,
T is the temperature in Kelvin,
H is the standard change in enthalpy, and
S is the standard change in entropy.
The thermochemical table can be used to determine the standard enthalpy of reaction (H°) and the standard entropy (S°) of a reaction.
The H and S values for the given reaction are as follows on the basis of normal conditions:
ΔH° = -483.6 kJ/mol
ΔS° = -202.4 J/(mol·K)
Note that the units for S° are J/(molK), which are different from the units for H°. To be used in the above equation, S° must first be converted to kJ/(mol K). Therefore,
ΔS° = -0.2024 kJ/(mol·K)
When we plug the values into the equation, we get:
ΔG° = (-483.6 kJ/mol) - (298 K)(-0.2024 kJ/(mol·K))ΔG° = -483.6 kJ/mol + 60.3 kJ/molΔG° = -423.3 kJ/molConsequently, the standard change in Gibbs free energy of the reaction at 25 °C is -423.3 kJ/mol.
Learn more about Gibbs free energy, here:
https://brainly.com/question/20358734
#SPJ1
Your question is incomplete, most probably the complete question is:
Calculate the standard change in Gibbs free energy for the following reaction at 25°C?
[tex]3H_2(g)+ Fe_2O_3 ------ > 2Fe (s)+ 3H_2O(g)[/tex]
use equation 7.24 and the data in chapter 4 (table 4.2) to calculate the standard molar entropy of cl2 (g) at 298.15 k. compare your answer with the experimental value of 223.1 jmol-1k-1
The standard molar entropy of cl2 (g) at 298.15 k is -0.05 J/mol K which is very small and may even be within the experimental error.
To calculate the standard molar entropy of Cl2 (g) at 298.15 K, we can use equation 7.24:
ΔS° = ΣS°(products) - ΣS°(reactants)
Using the data from chapter 4, we can find the standard molar entropy of Cl2 (g) and its elements:
S°(Cl2, g) = 223.07 J/mol K
S°(Cl2, l) = 223.15 J/mol K
S°(Cl, g) = 223.06 J/mol K
Since we are only interested in the gas phase, we will use the value for S°(Cl2, g). The equation for the formation of Cl2 (g) from its elements is:
Cl2 (g) = Cl (g) + Cl (g)
So, the reactants are two Cl (g) atoms, and the products are one Cl2 (g) molecule. Therefore:
ΔS° = S°(Cl2, g) - 2S°(Cl, g)
ΔS° = 223.07 J/mol K - 2(223.06 J/mol K)
ΔS° = -0.05 J/mol K
This value is very small and may even be within the experimental error, but it indicates that the formation of Cl2 (g) from its elements slightly decreases the entropy of the system.
Comparing this result to the experimental value of 223.1 J/mol K, we see that there is a small difference, which may be due to the approximations made in the calculation or the experimental error. However, the two values are very close, which indicates that the theoretical model used to calculate the standard molar entropy is a good approximation for this system.
For more such questions on Standard molar entropy.
https://brainly.com/question/17176334#
#SPJ11
Complete Question:
If 2.00 mL of 0.850 M NaOH are added to 1.000 L of 0.300 M CaCl2, what is the value of the reaction quotient and will precipitation occur?
The reaction between NaOH and CaCl₂ will form Ca(OH)₂ precipitate.
The balanced chemical equation is NaOH + CaCl₂ → Ca(OH)₂ + 2NaCl. The initial concentration of Ca²⁺ is 0.300 M, and the initial concentration of OH⁻ is (2.00 mL/1000 mL)(0.850 mol/L) = 0.0017 M.
The reaction quotient, Q, can be calculated by multiplying the concentrations of the products and dividing by the concentrations of the reactants raised to their stoichiometric coefficients.
Therefore, Q = [Ca²⁺][OH⁻]²/[Na⁺]²[Cl⁻]² = (0.300)(0.0017)²/0.85² = 5.5 × 10⁻⁴. Since Q is less than the solubility product, Ksp, of Ca(OH)₂ (1.6 × 10⁻⁵), precipitation will not occur.
To know more about solubility product click on below link:
https://brainly.com/question/31493083#
#SPJ11
what is the [h3o ] of a 5.9×10−9 m ba(oh)2 solution?
The [H3O+] of a 5.9×10−9 M Ba(OH)2 solution is 8.47 x 10^-7 M.
To find the [H3O+] of a 5.9×10−9 M Ba(OH)2 solution, we need to first recognize that Ba(OH)2 is a strong base and dissociates completely in water to form Ba2+ and 2 OH- ions.
The reaction can be written as:
Ba(OH)2 (s) → Ba2+ (aq) + 2OH- (aq)
Since OH- is a strong base, it will react with water to form H3O+ and OH- ions:
OH- (aq) + H2O (l) → H3O+ (aq) + OH- (aq)
The equilibrium constant for this reaction is Kw = [H3O+][OH-] = 1.0 x 10^-14 at 25°C.
To find the [H3O+] of the Ba(OH)2 solution, we need to first find the concentration of OH- ions:
[OH-] = 2 x 5.9×10−9 M = 1.18 x 10^-8 M
Using the Kw expression, we can solve for [H3O+]:
Kw = [H3O+][OH-]
1.0 x 10^-14 = [H3O+](1.18 x 10^-8)
[H3O+] = 8.47 x 10^-7 M
Therefore, the [H3O+] of a 5.9×10−9 M Ba(OH)2 solution is 8.47 x 10^-7 M.
Know more about Strong Base here:
https://brainly.com/question/28402352
#SPJ11
For the endothermic reaction
CaCO3 (s) <-----> CaO (s) + CO2 (g)
Le Chtelier's principle predicts that __________ will result in an increase in the number of moles of CO2 at equilibrium.
a. increasing the temperature
b. decreasing the temperature
c. increasing the pressure
d. removing some of the CaCO3(s)
e. adding more CaCO3 (s)
Le Chatelier's principle predicts that (a) increasing the temperature will result in an increase in the number of moles of CO₂ at equilibrium.
What is Le Chatelier's principle?According to Le Chatelier's principle, when a system at equilibrium is subjected to a stress, it will shift its equilibrium position in a way that tends to counteract that stress. For the given endothermic reaction, the reaction will absorb heat when it proceeds in the forward direction.
Therefore, increasing the temperature of the system will shift the equilibrium to the right, in the direction of the products, to absorb some of the added heat. As a result, there will be an increase in the number of moles of CO₂ at equilibrium.
Find out more on endothermic reaction here: https://brainly.com/question/6506846
#SPJ1
A gas system fitted is fitted with a piston. Calculate the total change in internal energy if 894 J are released when the gas is compressed 1.00 L against an external pressure of 966 torr.
The total change in internal energy of the gas system fitted with a piston is 886 J when the gas is compressed 1.00 L against an external pressure of 966 torr.
To calculate the total change in internal energy of the gas system fitted with a piston, we need to use the first law of thermodynamics, which states that the change in internal energy of a system is equal to the heat added to the system minus the work done by the system.
In this case, we know that 894 J of heat are released when the gas is compressed 1.00 L against an external pressure of 966 torr. We also know that the work done by the system is equal to the external pressure multiplied by the change in volume.
To calculate the change in volume, we need to convert the pressure from torr to Pascals (Pa) and then use the ideal gas law, PV=nRT, to find the final volume.
First, we convert 966 torr to Pa by multiplying by 133.3 Pa/torr, which gives us 128,578 Pa.
Next, we need to find the number of moles of gas present in the system. We can use the ideal gas law to do this:
PV=nRT
n = PV/RT
where P is the pressure, V is the initial volume (which we assume is equal to the final volume), R is the gas constant (8.31 J/mol*K), and T is the temperature (which we assume is constant).
Plugging in the values, we get:
n = (101,325 Pa)(1.00 L)/(8.31 J/mol*K)(298 K) = 0.0403 mol
Now we can use the ideal gas law to find the final volume:
PV=nRT
V = nRT/P
V = (0.0403 mol)(8.31 J/mol*K)(298 K)/(128,578 Pa) = [tex]0.00106 m^3[/tex]
The change in volume is therefore:
[tex]\triangle V = V_f - V_i = 0.00106 m^3 - 0.00100 m^3 = 6.00 *10^{-5} m^3[/tex]
Finally, we can calculate the work done by the system:
W = PΔV
[tex]= (128,578 Pa)(6.00 * 10^{-5} m^3)[/tex]
= 7.71 J
Now we can use the first law of thermodynamics to find the total change in internal energy:
ΔU = Q - W = 894 J - 7.71 J = 886 J
Therefore, the total change in internal energy of the gas system fitted with a piston is 886 J.
Learn more about thermodynamics :
https://brainly.com/question/30822943
#SPJ11
In a small test tube, combine about 1 drop of sodium hydroxide, NaOH(aq), and about 6 ops of lead(II) nitrate solution, Pb(NO3)2 (aq). What are your cheervatione?
Adding sodium hydroxide to lead(II) nitrate results in the formation of white lead(II) hydroxide precipitate; Safety precautions should be taken due to the corrosive and toxic nature of the substances involved.
How to find cheervatione?When sodium hydroxide (NaOH) is added to lead(II) nitrate (Pb(NO₃)₂), a precipitation reaction occurs. The balanced chemical equation for the reaction is:
2 NaOH(aq) + Pb(NO₃)₂(aq) → Pb(OH)₂(s) + 2 NaNO₃(aq)
This reaction shows that two moles of sodium hydroxide react with one mole of lead(II) nitrate to form one mole of lead(II) hydroxide (Pb(OH)₂) and two moles of sodium nitrate (NaNO₃).
The formation of a precipitate of lead(II) hydroxide (Pb(OH)₂) indicates that the reaction has occurred. The white solid of lead(II) hydroxide should be visible in the test tube.
It is important to note that both sodium hydroxide and lead(II) nitrate are corrosive and toxic substances, so proper safety precautions should be taken when handling them. Gloves and eye protection should be worn, and the experiment should be performed in a well-ventilated area.
Learn more about Balanced chemical equation
brainly.com/question/28294176
#SPJ11
Addition Reactions: Write the reagents on the arrows and draw ONLY the major product for each reaction. DON'T repeat same reaction. A. Addition reaction of alkenes. B. Hydrogenation (Pt, Lindlar's cat., Na/NH:()) 1 C. Addition reaction of alkynes. (Don't repeat hydrogenation reactions used in B)
The reactions are: (A) Addition reaction of alkenes: CH₂=CH₂ + HBr → CH₃-CH₂Br (B) Hydrogenation: CH₂=CH₂ + H₂ (Pt catalyst) → CH₃-CH₃; HC≡CH + H₂ (Lindlar's catalyst) → CH₂=CH₂; HC≡CH + NaNH₂ (in NH₃) → trans-CH=CH (C) Addition reaction of alkynes: HC≡CH + HBr → CH₂=CHBr
A. Addition reaction of alkenes: In this reaction, a reagent is added to an alkene, breaking the double bond and forming a single bond. One of the most common reagents used in alkene addition reactions is HBr.
Example: CH₂=CH₂ + HBr → CH₃-CH₂Br
B. Hydrogenation: This is the process of adding hydrogen (H₂) to an unsaturated hydrocarbon (alkenes or alkynes) in the presence of a catalyst such as Pt, Lindlar's catalyst, or Na/NH₃. The double or triple bond is broken, and the resulting product is a saturated hydrocarbon.
1. Hydrogenation with Pt:
Example: CH₂=CH₂ + H₂ (Pt catalyst) → CH₃-CH₃
2. Hydrogenation with Lindlar's catalyst (used for alkynes to alkenes):
Example: HC≡CH + H₂ (Lindlar's catalyst) → CH₂=CH₂
3. Hydrogenation with Na/NH₃ (used for alkynes to trans-alkenes):
Example: HC≡CH + NaNH₂ (in NH₃) → trans-CH=CH
C. Addition reaction of alkynes (not repeating hydrogenation reactions used in B): A common addition reaction for alkynes is the hydrohalogenation, where a hydrogen halide (like HBr) is added to the triple bond, resulting in an alkene with a halogen atom attached.
Example: HC≡CH + HBr → CH₂=CHBr
To learn more about alkynes, visit: https://brainly.com/question/29654692
#SPJ11
which gas effuses slowest? 1. chlorine 2. carbon dioxide 3. nitrogen 4. fluorine 5. carbon monoxide
The gas that effuses slowest is carbon dioxide. This is because effusion is the escape of a gas through a small hole or opening, and the rate of effusion is inversely proportional to the square root of the molar mass of the gas.
Carbon dioxide has a molar mass of 44.01 g/mol, which is higher than that of nitrogen (28.01 g/mol) and carbon monoxide (28.01 g/mol), but lower than that of chlorine (70.91 g/mol) and fluorine (38.00 g/mol). Therefore, carbon dioxide will effuse slower than nitrogen and carbon monoxide, but faster than chlorine and fluorine.
The gas that effuses slowest among the options provided is chlorine. This is because effusion rate is inversely proportional to the square root of the molecular mass, according to Graham's Law of Effusion. Chlorine has the highest molecular mass (70.9 g/mol) among the listed gases, resulting in a slower effusion rate compared to the others.
Visit here to learn more about carbon dioxide brainly.com/question/3049557
#SPJ11
The gas that effuses slowest is carbon dioxide. This is because effusion is the escape of a gas through a small hole or opening, and the rate of effusion is inversely proportional to the square root of the molar mass of the gas.
Carbon dioxide has a molar mass of 44.01 g/mol, which is higher than that of nitrogen (28.01 g/mol) and carbon monoxide (28.01 g/mol), but lower than that of chlorine (70.91 g/mol) and fluorine (38.00 g/mol). Therefore, carbon dioxide will effuse slower than nitrogen and carbon monoxide, but faster than chlorine and fluorine.
The gas that effuses slowest among the options provided is chlorine. This is because effusion rate is inversely proportional to the square root of the molecular mass, according to Graham's Law of Effusion. Chlorine has the highest molecular mass (70.9 g/mol) among the listed gases, resulting in a slower effusion rate compared to the others.
Visit here to learn more about carbon dioxide brainly.com/question/3049557
#SPJ11
the predicted van't hoff factor for a calcium chloride solution, cacl₂(aq), is a) 1 b) 2 c) 3 d) 4 e) 0
The predicted van't Hoff factor for a calcium chloride solution, CaCl₂(aq), is c) 3.
The quantity of ions a solute dissociates into during solvent dissolution is known as the van't Hoff factor (i). A solute's impact on associated properties, such as osmotic pressure, relative vapor pressure reduction, boiling-point elevation, and freezing-point depression, is measured by the van 't Hoff factor i. The van 't Hoff factor measures the difference between the concentration of a substance determined by its mass and the actual concentration of particles created as the substance dissolves. Calcium chloride, CaCl₂, dissociates into one calcium ion (Ca²⁺) and two chloride ions (2 Cl⁻) when it dissolves in water. Therefore, the van't Hoff factor for CaCl₂ is 1 + 2 = 3.
Learn more about van't Hoff factor : https://brainly.com/question/30670272
#SPJ11
During today's lab, hydrochloric acid is used to: (select all that apply)
A)Neutralize any grignard reagent still present in the reaction
B) Neutralize the THF
C) Convert the remaining magnesium into dye
D) Convert the alkoxide to the alcohol, and then allow it to eliminate, forming the dye
The correct option is D) Convert the alkoxide to the alcohol, and then allow it to eliminate, forming the dye.
What function does the play in the Grignard reaction?Hydrochloric acid must be added in order to dissolve any remaining Grignard reagent and transform the magnesium alcoholate into alcohol. The dimethylamino group would also be protonated if the pH level was too low, making the end product far more water soluble.
What is the purpose of a Grignard reagent?It is possible to count the halogen atoms in a halogen compound using Grignard reagents. For the chemical examination of several triacylglycerols as well as numerous cross-coupling reactions for the synthesis of various carbon-carbon and carbon-heteroatom linkages, Grignard degradation is employed.
To know more about alkoxide visit:-
https://brainly.com/question/31413844
#SPJ1
Can the pH of a buffer solution of potassium hydroxide decrease when exposed to air overnight?
Yes, the pH of a buffer solution of potassium hydroxide ([tex]K_{O}H[/tex]) can decrease when exposed to air overnight, depending on the specific conditions. Buffer solutions are made by mixing a weak acid and its corresponding conjugate base, or a weak base and its corresponding conjugate acid, in order to maintain a relatively constant pH when small amounts of acid or base are added to the solution.
However, when a buffer solution is exposed to air overnight, it can undergo changes that affect its pH. For example, carbon dioxide ([tex]Co_{2}[/tex]) from the air can dissolve in the buffer solution to form carbonic acid ([tex]H_{2} Co{3}[/tex]), which can react with the weak base in the buffer and decrease its concentration, leading to a decrease in pH. Additionally, if the buffer solution is not stored properly, it may undergo bacterial or fungal growth, which can alter the pH by producing acidic or basic compounds.
Therefore, while a buffer solution of potassium hydroxide is generally resistant to changes in pH, it is still possible for its pH to decrease when exposed to air overnight, depending on the specific conditions of the environment.
To know more about buffer solution
brainly.com/question/24262133
#SPJ11
Which of the following statements is not true? a. In polar protic solvents, nucleophilicity decreases down a column of the periodic table as the size of the anion increases. b. Nucleophilicity is affected by the solvent used in a substitution reaction. c. Polar protic solvents are capable of intermolecular hydrogen bonding. d. Polar protic solvents solvate both cations and anions.
The statement that is not true is a. In polar protic solvents, nucleophilicity decreases down a column of the periodic table as the size of the anion increases. So, the correct option is option a.
In polar protic solvents, nucleophilicity decreases down a column of the periodic table as the size of the anion increases, which is not true.
In fact, nucleophilicity increases down a column of the periodic table in polar protic solvents, as larger anions are better able to stabilize the positive charge that results from the nucleophilic attack.
Therefore, as size increases going down the group, nucleophilicity also increases.
The other statements b. Nucleophilicity is affected by the solvent used in a substitution reaction, c. Polar protic solvents are capable of intermolecular hydrogen bonding, and d. Polar protic solvents solvate both cations and anions are all true.
Know more about nucleophilicity here:
https://brainly.com/question/27060397
#SPJ11
Here are your data for the titration of the commercial aspirin CA1 sample solutions. Mass of commercial aspirin CA1 sample Volume of NaOHTrial #1 0.215 g 16.37 mLTrial #2 0.206 g 16.08 mL Determine the number of moles of acid (total) in your commercial aspirin ca1 sample for both trials
The number of moles of acid (total) in the commercial aspirin sample is 0.003245 mol, calculated by adding the moles of NaOH used in two trials, where the molarity of NaOH was assumed to be 0.100 M.
How to determine the number of moles of acid?To determine the number of moles of acid in the commercial aspirin CA1 sample, we need to first calculate the number of moles of NaOH used in the titration. We can use the following equation:
moles of NaOH = Molarity of NaOH x volume of NaOH used (in L)
Assuming the molarity of NaOH is 0.100 M, we can calculate the moles of NaOH used in each trial as follows:
Trial #1:
moles of NaOH = 0.100 mol/L x 0.01637 L = 0.001637 mol
Trial #2:
moles of NaOH = 0.100 mol/L x 0.01608 L = 0.001608 mol
Since the reaction between NaOH and aspirin is a 1:1 stoichiometric ratio, the number of moles of acid (aspirin) in each trial is equal to the number of moles of NaOH used. Therefore, the number of moles of acid in each trial is:
Trial #1:
moles of acid = 0.001637 mol
Trial #2:
moles of acid = 0.001608 mol
So the number of moles of acid (total) in the commercial aspirin CA1 sample for both trials is 0.001637 mol + 0.001608 mol = 0.003245 mol.
Learn more about Number of moles
brainly.com/question/21085277
#SPJ11
write a mechanism for the formation of an azo dye from p-nitrobenzenediazonium hydrogen sulfate and 8-anilino-1-naphthalenesulfonic acid?
Answer:
See explanation
Explanation:
The formation of an azo dye from p-nitrobenzenediazonium hydrogen sulfate and 8-anilino-1-naphthalenesulfonic acid occurs through a diazo coupling reaction. The mechanism is as follows:
Step 1: Formation of the diazonium salt
p-nitroaniline is first diazotized using nitrous acid to form p-nitrobenzenediazonium ion (ArN2+).
ArNH2 + HNO2 + H2SO4 → ArN2+ + 2H2O + HSO4-
Step 2: Formation of the coupling partner
8-anilino-1-naphthalenesulfonic acid acts as the coupling partner. It is deprotonated by a base such as NaOH to form the anilinonaphthalene sulfonate anion (Ar'SO3-).
Ar'SO3H + NaOH → Ar'SO3- + H2O + Na+
Step 3: Coupling of the diazonium ion and coupling partner
The diazonium ion attacks the coupling partner, and a nitrogen-nitrogen (N-N) double bond is formed to produce the azo dye.
ArN2+ + Ar'SO3- → ArN=N-Ar'SO3- + H+
The azo dye that is formed is typically orange or red in color, depending on the specific coupling partners used.
the decomposition of 4.21 g nahco3 yields 2.07 g na2co3. what is the percent yield of this reaction?
the decomposition of 4.21 g nahco3 yields 2.07 g [tex]Na_{2} CO_{3}[/tex].The percent yield of this reaction is 77.94%.
To calculate the percent yield of the decomposition reaction of [tex]NaHCO_{3}[/tex]to [tex]Na_{2} CO_{3}[/tex], you'll need to follow these steps:
Step 1: Determine the balanced chemical equation for the decomposition reaction:
2 [tex]Na_{2} CO_{3}[/tex]→ [tex]Na_{2} CO_{3}[/tex] +[tex]H_{2} O[/tex] + [tex]CO_{2}[/tex]
Step 2: Calculate the theoretical yield:
Find the molar mass of [tex]NaHCO_{3}[/tex]: (1 × 22.99) + (1 × 1.01) + (1 × 12.01) + (3 × 16.00) = 84.01 g/mol
Find the molar mass of [tex]Na_{2} CO_{3}[/tex]: (2 × 22.99) + (1 × 12.01) + (3 × 16.00) = 105.99 g/mol
Find the moles of [tex]NaHCO_{3}[/tex]: 4.21 g / 84.01 g/mol = 0.0501 mol
Using the balanced equation, 2 moles of [tex]NaHCO_{3}[/tex]produce 1 mole of [tex]Na_{2} CO_{3}[/tex], so the moles of [tex]Na_{2} CO_{3}[/tex] produced: 0.0501 mol / 2 = 0.02505 mol
Calculate the theoretical yield of [tex]Na_{2} CO_{3}[/tex]: 0.02505 mol × 105.99 g/mol = 2.655 g
Step 3: Calculate the percent yield:
Percent yield = (Actual yield / Theoretical yield) × 100
Percent yield = (2.07 g / 2.655 g) × 100 = 77.94%
The percent yield of this reaction is 77.94%.
learn more about decomposition here
https://brainly.com/question/19607269
#SPJ11
the decomposition of 4.21 g nahco3 yields 2.07 g [tex]Na_{2} CO_{3}[/tex].The percent yield of this reaction is 77.94%.
To calculate the percent yield of the decomposition reaction of [tex]NaHCO_{3}[/tex]to [tex]Na_{2} CO_{3}[/tex], you'll need to follow these steps:
Step 1: Determine the balanced chemical equation for the decomposition reaction:
2 [tex]Na_{2} CO_{3}[/tex]→ [tex]Na_{2} CO_{3}[/tex] +[tex]H_{2} O[/tex] + [tex]CO_{2}[/tex]
Step 2: Calculate the theoretical yield:
Find the molar mass of [tex]NaHCO_{3}[/tex]: (1 × 22.99) + (1 × 1.01) + (1 × 12.01) + (3 × 16.00) = 84.01 g/mol
Find the molar mass of [tex]Na_{2} CO_{3}[/tex]: (2 × 22.99) + (1 × 12.01) + (3 × 16.00) = 105.99 g/mol
Find the moles of [tex]NaHCO_{3}[/tex]: 4.21 g / 84.01 g/mol = 0.0501 mol
Using the balanced equation, 2 moles of [tex]NaHCO_{3}[/tex]produce 1 mole of [tex]Na_{2} CO_{3}[/tex], so the moles of [tex]Na_{2} CO_{3}[/tex] produced: 0.0501 mol / 2 = 0.02505 mol
Calculate the theoretical yield of [tex]Na_{2} CO_{3}[/tex]: 0.02505 mol × 105.99 g/mol = 2.655 g
Step 3: Calculate the percent yield:
Percent yield = (Actual yield / Theoretical yield) × 100
Percent yield = (2.07 g / 2.655 g) × 100 = 77.94%
The percent yield of this reaction is 77.94%.
learn more about decomposition here
https://brainly.com/question/19607269
#SPJ11
Which half-cell, when connected with the Cu2+ /Cu half-cell (Cu2+ + 2e- → Cu), will result in a positive cell potential? 1-/12 Fe2+/Fe3+
Ag/Ag Sn2+ /Sn
Okay, let's evaluate the options to determine which half-cell will result in a positive cell potential when combined with the Cu2+/Cu half-cell:
1. Fe2+/Fe3+: This half-cell converts Fe2+ ions to Fe3+ ions. The standard cell potential for Fe2+/Fe3+ is +0.77 V. When combined with the Cu2+/Cu half-cell, the overall cell potential will be +0.77 V - E°Cu2+/Cu = +0.77 V - 0.34 V = +0.43 V. This is a positive value, so Fe2+/Fe3+ will work.
2. Ag/Ag+: The standard cell potential for Ag/Ag+ is +0.80 V. Combined with Cu2+/Cu, the cell potential would be +0.80 V - 0.34 V = +0.46 V. This is also positive, so Ag/Ag+ can be used.
3. Sn2+/Sn: The standard cell potential for Sn2+/Sn is -0.14 V. Combined with Cu2+/Cu, the cell potential would be -0.14 V - 0.34 V = -0.48 V. This is negative, so Sn2+/Sn will not result in a positive cell potential.
In summary, the half-cells that will work with Cu2+/Cu to give a positive overall cell potential are:
1. Fe2+/Fe3+
2. Ag/Ag+
Sn2+/Sn will give a negative potential and cannot be used.
Does this make sense? Let me know if you have any other questions!
what is the ph of a 0.750 m solution of nacn (ka of hcn is 4.9 × 10⁻¹⁰)?
Finally, we can use the following relationship to determine the solution's pH: pH + pOH = 14 pH = 14 - pOH = 14 - 2.41 ≈ 11.59 The 0.750 M NaCN solution therefore has a pH of about 11.59. The pH of a sodium cyanide (NaCN) solution is 12.10.
The pH of a 0.1N KCN solution is 11, and both potassium cyanide (KCN) and sodium cyanide (NaCN) are basic chemicals. Most of the cyanide ions (CN-) are changed into HCN when these alkaline salts are neutralised. Cyanide exits as HCN at pH 8,93%; at pH 7,99%, it is HCN (Towill et al.
To know more about sodium cyanide, click here:
https://brainly.com/question/30463329
#SPJ4