balanced chemical reaction showing the hydrolysis of ethyl acetate with sodium hydroxide. true or false

The concentration of NH₄Cl is 0.39 M, which means the concentration of NH⁴⁺ and Cl⁻ is also 0.39 M. The pH of the solution will be obtained after calculation as 9.665.

The first step to solve this problem is to write the equation for the reaction of  NH₄Cl with water:

NH₄Cl + H₂O → NH⁴⁺ + Cl⁻ + H₃O⁺

The concentration of  NH₄Cl is 0.39 M, which means the concentration of  NH⁴⁺  and Cl⁻ is also 0.39 M. At equilibrium, the concentration of  H₃O⁺ can be calculated using the equilibrium constant expression for the reaction of NH⁴⁺ with water:

Kb = [NH⁴⁺ ][OH⁻]/[NH₃]

Kb for NH₃ is 1.8 × 10⁻⁵, so:

4.74 = -㏒(Kb) = -㏒([NH⁴⁺ ][OH⁻]/[NH₃])

Solving for [OH⁻], we get:

[OH⁻] = Kb[NH₃]/[NH⁴⁺] = 1.8 × 10⁻⁵ / 0.39 = 4.62 × 10⁻⁵ M

Finally, we can use the equation for the ion product of water to find the concentration of H₃O⁺:

Kw = [H₃O⁺][OH⁻] = 1.0 × 10⁻¹⁴

[H₃O⁺] = Kw / [OH⁻] = 1.0 × 10⁻¹⁴/ 4.62 × 10⁻⁵ = 2.16 × 10⁻¹⁰ M

Taking the negative logarithm of [H₃O⁺], we get the pH of the solution:

pH = -㏒[H₃O⁺] = -㏒(2.16 × 10⁻¹⁰) = 9.665

Therefore, the pH of the solution is 9.665.

Learn more about pH of a solution here :

https://brainly.com/question/30934747

#SPJ1

The reaction enthalpy per mole of calcium is -652.8 kJ/mol Ca when specific heat of the solution is 4.180.

The first step is to calculate the heat absorbed by the solution. The mass of the solution is 100.0 g + (5.00 g / 1.03 g/mL) = 105.83 g. The change in temperature is ΔT = 35.5 °C - 20.5 °C = 15.0 °C. Using the specific heat of the solution, q = (105.83 g)(4.180 J/g°C)(15.0 °C) = 69917 J.

Next, we need to calculate the number of moles of HCl that reacted. Since the concentration of the HCl solution is 2.500 M, there are 2.500 mol of HCl per liter of solution. Therefore, in 100.0 g of solution, there are (100.0 g / 1.03 g/mL) x (1 L / 1000 mL) x (2.500 mol/L) = 0.24375 mol of HCl. Since the reaction between Ca and HCl is 1:2, the number of moles of Ca that reacted is half that, or 0.12188 mol.

Finally, we can calculate the reaction enthalpy per mole of Ca. ΔH_rxn = q / n, where n is the number of moles of Ca that reacted. Therefore, ΔH_rxn = (69917 J) / (0.12188 mol) = -572944 J/mol Ca. Converting to kJ/mol Ca, we get -572.944 kJ/mol Ca. However, this value is for the reaction of 0.12188 mol of Ca. To get the reaction enthalpy per mole of Ca, we need to multiply this value by the factor 1/0.12188 mol Ca. This gives us -652.8 kJ/mol Ca as the final answer.

Learn more about reaction enthalpy here:

https://brainly.com/question/1657608

#SPJ11

The nitration products of the compounds are:

1. For p-chlorophenol: 4-chloro-2-nitrophenol
2. For m-nitrochlorobenzene: 1,3-dichloro-5-nitrobenzene



1. Nitration of p-chlorophenol:
- p-chlorophenol (C₆H₄ClOH) reacts with a nitrating agent like HNO₃/H₂SO₄.
- The nitro group (NO2) replaces the hydrogen on the ortho position due to the activating effect of the hydroxyl group.
- The final product is 4-chloro-2-nitrophenol (C₆H₃Cl(NO₂)OH).

2. Nitration of m-nitrochlorobenzene:
- m-nitrochlorobenzene (C₆H₄ClNO₂) reacts with a nitrating agent like HNO₃/H₂SO₄.
- The nitro group (NO₂) on the benzene ring deactivates it, directing the incoming electrophile to the meta position.
- The final product is 1,3-dichloro-5-nitrobenzene (C₆H₃Cl₂(NO₂)).

To know more about electrophile click on below link:

https://brainly.com/question/31182532#

#SPJ11

A colloid consists of a medium called the continuous phase (analogous to the solvent in a solution) and large particles called the dispersed phase (analogous to the solute in a solution).

The continuous phase is the substance in which the dispersed phase is distributed, while the dispersed phase is the particles suspended in the continuous phase.

This unique structure allows colloids to exhibit properties different from those of true solutions, such as the Tyndall effect, in which light is scattered by the suspended particles.

To know more about Tyndall effect click on below link:

https://brainly.com/question/14431922#

#SPJ11

[C6H5NH+3] = 0.210 M
[Cl?] = 0.210 M
[C6H5NH2] = 0 M (this is the conjugate base and is not present in acidic solution)
[H3O+] = 3.0 x 10^-5 M
[OH?] = 3.0 x 10^-10 M

Note: The values for [H3O+] and [OH?] were calculated assuming the C6H5NH3Cl solution was at room temperature (25°C) and had a pH of 4.52 (determined using the Ka value for C6H5NH3+, which is 4.87 x 10^-10).
To calculate the concentration of all species in a 0.210 M C6H5NH3Cl solution, we first need to identify the species present in the solution:

1. C6H5NH3+ (cation from the acid)
2. Cl- (anion from the salt)
3. C6H5NH2 (the base)
4. H3O+ (hydronium ion)
5. OH- (hydroxide ion)

Since C6H5NH3Cl is a weak acid, we can assume that it does not completely dissociate in water. Therefore, the initial concentration of C6H5NH3+ and Cl- ions will be 0.210 M each. The concentration of C6H5NH2, H3O+, and OH- can be considered negligible in comparison. Thus, the concentrations are:

[C6H5NH3+] = 0.210 M
[Cl-] = 0.210 M
[C6H5NH2] ≈ 0 M
[H3O+] ≈ 0 M
[OH-] ≈ 0 M

Your answer: 0.210, 0.210, 0, 0, 0

Visit here to learn more about cation brainly.com/question/1333307

#SPJ11

The 0.1 M aqueous solution that can be used to confirm the identity of the solid is HCl(aq). This solution will react differently with NaHCO₃, AgNO₃, Na₂S, or CaBr₂, helping you identify the white solid.


a. NH₃(aq) - Ammonia will not react with any of these compounds in a distinctive way to confirm their identity.

b. HCl(aq) - Hydrochloric acid will react with NaHCO₃ to produce CO₂ gas, with AgNO₃ to form a white precipitate of AgCl, and with Na₂S to form a rotten egg smell due to the production of H₂S gas. It will not react significantly with CaBr₂.

c. NaOH(aq) - Sodium hydroxide will not react in a unique way with the given compounds to determine the identity of the solid.

d. KCl(aq) - Potassium chloride will not react with any of these compounds in a distinctive manner to identify the solid.

By using HCl(aq) and observing the specific reactions, you can determine which solid you have in your sample.

To know more about Hydrochloric acid click on below link:

https://brainly.com/question/15231576#

#SPJ11

The estimated mean ionic activity coefficient (γ±) of CaCl₂ in a 0.010 M CaCl₂(aq) and 0.030 M NaF(aq) solution is approximately 0.71, and the activity (A) of CaCl₂ is approximately 0.0071.

To estimate the mean ionic activity coefficient, first, calculate the ionic strength (I) of the solution:
I = 0.5 * (0.010 * (2^2) + 0.030 * (1^2 + 1^2)) = 0.035 M

Then, use the Debye-Hückel limiting law to estimate the mean ionic activity coefficient (γ±) for CaCl₂:
log(γ±) = -0.509 * √(0.035) / (1 + (1.5 * 0.702) * √(0.035))
γ± ≈ 0.71

Finally, calculate the activity (A) of CaCl₂ by multiplying the mean ionic activity coefficient (γ±) by the molar concentration (C) of CaCl₂:
A = γ± * C = 0.71 * 0.010 M ≈ 0.0071

To know more about ionic strength click on below link:

https://brainly.com/question/28145535#

#SPJ11

The estimated mean ionic activity coefficient (γ±) of CaCl₂ in a 0.010 M CaCl₂(aq) and 0.030 M NaF(aq) solution is approximately 0.71, and the activity (A) of CaCl₂ is approximately 0.0071.

To estimate the mean ionic activity coefficient, first, calculate the ionic strength (I) of the solution:
I = 0.5 * (0.010 * (2^2) + 0.030 * (1^2 + 1^2)) = 0.035 M

Then, use the Debye-Hückel limiting law to estimate the mean ionic activity coefficient (γ±) for CaCl₂:
log(γ±) = -0.509 * √(0.035) / (1 + (1.5 * 0.702) * √(0.035))
γ± ≈ 0.71

Finally, calculate the activity (A) of CaCl₂ by multiplying the mean ionic activity coefficient (γ±) by the molar concentration (C) of CaCl₂:
A = γ± * C = 0.71 * 0.010 M ≈ 0.0071

To know more about ionic strength click on below link:

https://brainly.com/question/28145535#

#SPJ11

The concentration of KMnO4 from the titration is 0.04117 mol/L.

To determine the concentration of KMnO4, we need to use the balanced chemical equation for the reaction between iron(II) and permanganate ions:

5Fe2+(aq) + MnO4-(aq) + 8H+(aq) → 5Fe3+(aq) + Mn2+(aq) + 4H2O(l)

We know that the iron(II) solution has a concentration of 0.05000 mol/L, and we can calculate the number of moles of iron(II) in the 10.00 mL sample as:

n(Fe2+) = C(Fe2+) x V(Fe2+)

n(Fe2+) = 0.05000 mol/L x 10.00 mL / 1000 mL/L

n(Fe2+) = 0.0005000 mol

According to the stoichiometry of the reaction, each mole of iron(II) reacts with one mole of permanganate ions. Therefore, the number of moles of permanganate ions used in each trial is equal to the number of moles of iron(II):

n(MnO4-) = n(Fe2+) = 0.0005000 mol

We can then calculate the concentration of KMnO4 in each trial using the volume and number of moles of permanganate ions:

C(KMnO4) = n(MnO4-) / V(KMnO4)

Using the data provided, we get:

Trial 1: C(KMnO4) = 0.0005000 mol / 0.01244 L = 0.04016 mol/L

Trial 2: C(KMnO4) = 0.0005000 mol / 0.01199 L = 0.04170 mol/L

Trial 3: C(KMnO4) = 0.0005000 mol / 0.01188 L = 0.04203 mol/L

Trial 4: C(KMnO4) = 0.0005000 mol / 0.01193 L = 0.04178 mol/L

To obtain the average concentration of KMnO4, we can add up the four trial concentrations and divide by the number of trials:

C(KMnO4)avg = (0.04016 mol/L + 0.04170 mol/L + 0.04203 mol/L + 0.04178 mol/L) / 4

C(KMnO4)avg = 0.04117 mol/L

Therefore, the concentration of KMnO4 is 0.04117 mol/L, and we should report our answer to four significant digits, which is the same number of significant digits as the original concentration of iron(II).

Learn more on titration here https://brainly.com/question/2496608

#SPJ1

The cobalt equilibrium will be affected if you use concentrated H₂SO₄ instead of HCl because H₂SO₄ is a stronger acid than HCl.

The cobalt equilibrium refers to the equilibrium between cobalt ions and water. When HCl is added to the solution, it reacts with water to form H₃O⁺ ions, which shift the equilibrium towards the formation of more Co(H₂O)₆³⁺ ions.

If concentrated H₂SO₄ is used instead of HCl, it would react with water to form H₃O⁴ and HSO₄⁺ ions. This would still shift the equilibrium towards the formation of more Co(H₂O)₆³⁺ ions, but the concentration of H⁺ ions would be lower than if HCl was used. This means that the equilibrium shift would not be as significant as with HCl, and the overall effect on the cobalt equilibrium would be less pronounced.

Learn more about cobalt: https://brainly.com/question/31110063

#SPJ11

To determine the molarity of a solution prepared by dissolving 10.7 g of NaI in 0.250 L of water, follow these steps:

1. Calculate the moles of NaI by dividing the mass (10.7 g) by the molar mass of NaI. The molar mass of NaI is 22.99 g/mol (Na) + 126.90 g/mol (I) = 149.89 g/mol.
  Moles of NaI = 10.7 g / 149.89 g/mol = 0.0714 mol

2. Calculate the molarity by dividing the moles of NaI (0.0714 mol) by the volume of water in liters (0.250 L).
  Molarity = 0.0714 mol / 0.250 L = 0.286 M

So, the molarity of the solution prepared by dissolving 10.7 g of NaI in 0.250 L of water is 0.286, corresponding to option B.

Learn more about molarity: What is the concentration in molarity of an aqueous solution which contains 5.21% by mass ethylene glycol (mm=62.07g/mol)?  https://brainly.com/question/14469428

#SPJ11

The total number of atoms present in 400 grams of Na₂SO₄ is 1.60 x 10²⁵ atoms.

To find this, first, determine the number of moles in 400 grams of Na₂SO₄:

1. Calculate the molar mass of Na₂SO₄: (2 x 22.99) + 32.07 + (4 x 16.00) = 142.04 g/mol
2. Convert grams to moles: 400 g / 142.04 g/mol ≈ 2.817 moles

Next, determine the number of formula units in 2.817 moles of Na₂SO₄:

3. Use Avogadro's number (6.022 x 10²³ formula units/mol): 2.817 moles x 6.022 x 10²³ formula units/mol ≈ 1.696 x 10²⁴ formula units

Finally, find the total number of atoms in 1.696 x 10²⁴ formula units of Na₂SO₄:

4. In each formula unit, there are 2 Na atoms, 1 S atom, and 4 O atoms (total of 7 atoms)

5. Multiply the number of formula units by the number of atoms per formula unit: 1.696 x 10²⁴ formula units x 7 atoms/formula unit ≈ 1.60 x 10²⁵ atoms

To know more about Avogadro's number click on below link:

https://brainly.com/question/28812626#

#SPJ11

Once you know the gem's refractive index, you may use the formula to determine the Brewster's angle in degrees. When the gem is submerged in water, light will be totally polarised at this angle.

To determine the angle at which light would be completely polarized when a gem is in water, we need to use Brewster's angle formula. The terms involved are

1. Brewster's angle (θ_B)
2. Refractive indices (n1 and n2)

The Brewster's angle formula is:

θ_B = arctan(n2 / n1)

where n1 is the refractive index of the first medium (water) and n2 is the refractive index of the second medium (gem).

1: Find the refractive indices of water and the gem.
For water, n1 = 1.33 (approximately). You will need the refractive index of the gem (n2) to continue. Let's assume it is x.

2: Calculate Brewster's angle.
_B = arctan(x) / 1.33 3: Convert the angle from radians to degrees.
θ_B (in degrees) = (θ_B in radians) * (180 / π)

Once you have the refractive index of the gem, plug it into the formula and calculate the Brewster's angle in degrees. At this angle, light will be completely polarized when the gem is in water.

For more such questions on gem , click on:

https://brainly.com/question/12590

#SPJ11

To write a balanced chemical equation, we need to ensure that the number of atoms of each element is the same on both sides of the equation. This is done by adjusting the coefficients (the numbers in front of each compound or element) until the equation is balanced.

For example, let's balance the equation for the reaction between hydrogen gas (H2) and oxygen gas (O2) to form water (H2O):

H2 + O2 -> H2O

To balance this equation, we need to add a coefficient of 2 in front of H2O:

2H2 + O2 -> 2H2O

Now the equation is balanced, with 2 atoms of hydrogen and 2 atoms of oxygen on both sides.

The stoichiometric coefficients are the numbers in front of each compound or element in the balanced chemical equation. These coefficients tell us the relative number of molecules or moles of each substance involved in the reaction.

The sum of the stoichiometric coefficients is simply the sum of all the coefficients in the balanced chemical equation. For the above example, the sum of the coefficients is:

2 + 1 + 2 + 2 = 7

So the sum of the stoichiometric coefficients for this balanced chemical reaction is 7.
Hello! To help you with your question, let's consider a simple chemical reaction:

Hydrogen gas (H₂) reacts with oxygen gas (O₂) to form water (H₂O).

Now, to balance the chemical equation, we need to ensure that the number of atoms for each element is equal on both sides of the equation. The balanced chemical equation for this reaction is:

2H₂ + O₂ → 2H₂O

In this equation, the stoichiometric coefficients are the numbers in front of the chemical species, which are 2 for H₂, 1 for O₂, and 2 for H₂O. To find the sum of the stoichiometric coefficients, add these coefficients together:

2 (for H₂) + 1 (for O₂) + 2 (for H₂O) = 5

Therefore, the sum of the coefficients for the balanced chemical reaction is 5.

Learn more about chemical equation here;

https://brainly.com/question/30087623

#SPJ11

The reaction between chloride ion and metal aquo complexes of metals like copper, silver, or gold is expected to be most extensive, while the reaction with metal aquo complexes of alkali metals or alkaline earth metals is expected to be least extensive.

The extent of the reaction between a metal aquo complex and chloride ion can be determined by comparing the stability constants (also known as formation constants or equilibrium constants) of the metal aquo complex with chloride ion for different metals. The stability constants of metal aquo complexes can vary depending on the specific metal ion and the coordination chemistry involved. Typically, transition metal ions with high charge and small ionic radius tend to form more stable aquo complexes, while those with lower charge or larger ionic radius tend to form less stable aquo complexes.

For example, metals like copper (Cu), silver (Ag), and gold (Au) tend to form stable aquo complexes with high stability constants, and their reactions with chloride ion can be more extensive. On the other hand, metals like alkali metals (e.g., sodium (Na), potassium (K), etc.) and alkaline earth metals (e.g., calcium (Ca), magnesium (Mg), etc.) tend to form less stable aquo complexes with lower stability constants, and their reactions with chloride ion can be less extensive.

Therefore, the reaction with chloride ion is most extensive for metal aquo complexes with higher charge and smaller size, such as Fe3+ and Al3+. On the other hand, metal aquo complexes with lower charge and larger size, such as Mg2+ and Ca2+, tend to form less stable chloride complexes and the reaction is least extensive with chloride ion for these metals.

To know more about Metal Aquo Complexes:

https://brainly.com/question/28383638

#SPJ11

The name of the compound is (Z)-4,5-dimethyl-4-hepten-1-ol.

It contains a double bond (hence the "en" ending) between the 4th and 5th carbons from the end, and a hydroxyl group (-OH) attached to the 1st carbon.

The "dimethyl" prefix indicates that there are two methyl groups (-CH3) attached to the 4th carbon,

The "hepten" prefix indicates that there are seven carbons in the molecule with a double bond between the 4th and 5th carbons.

The "ol" ending indicates that it is an alcohol with the hydroxyl group attached to the 1st carbon.

Learn more about methyl groups here:

https://brainly.com/question/12904781

#SPJ11

There are two types of substances, they are combustible and non-combustible substances. Those substances which undergo combustion are defined as the combustible substances. Here the mass of ethanol is 3832.26 g.

The process in which a substance burns in the presence of oxygen to produce heat and light can be defined as the combustion. The products of the combustion reaction are carbon-dioxide and water.

The combustion of ethanol is:

C₂H₅OH  +  3O₂  →  2CO₂  +  3H₂O

1 mol of ethanol, you can make 3 mole of water.

Moles of water = mass / Molar mass = 500.0 / 18 = 27.77

27.77 mole came from 27.77 × 3 / 1 = 83.31 mole of ethanol

Molar mass ethanol = 46 g/mol

Mass =  83.31 ×  46 = 3832.26 g

To know more about combustion, visit;

https://brainly.com/question/14283641

#SPJ1

The estimated boiling point of argon at 1.5 atm is approximately 87.6 K. We can use the Clausius-Clapeyron equation:
ln(P2/P1) = ΔHvap/R * (1/T1 - 1/T2)

R = 8.314 J/mol·K
P1 = 1 atm = 101.325 kPa
T1 = 87.3 K
ΔHvap = 6.53 kJ/mol
P2 = 1.5 atm = 152.0 kPa
First, convert the units of ΔHvap to J/mol:
ΔHvap = 6.53 kJ/mol * 1000 J/kJ = 6530 J/mol
Substituting the values into the equation and solving for T2:
ln(152.0 kPa/101.325 kPa) = 6530 J/mol / (8.314 J/mol·K) * (1/87.3 K - 1/T2)
ln(1.5) = 785.5 K / (8.314 J/mol·K) * (1/87.3 K - 1/T2)
0.4055 = 94.41 * (1/87.3 K - 1/T2)
0.004296 K = 1/T2 - 0.011463 K
1/T2 = 0.011463 K + 0.004296 K = 0.01576 K
T2 = 1 / 0.01576 K = 63.4 K
Therefore, the estimated boiling point of argon at 1.5 atm is 63.4 K.

To estimate the boiling point of argon at 1.5 atm, we can use the Clausius-Clapeyron equation:
ln(P2/P1) = (ΔHvap/R) * (1/T1 - 1/T2)
where P1 and P2 are the initial and final pressures (in atm), T1 and T2 are the initial and final boiling points (in K), ΔHvap is the enthalpy of vaporization (in J mol-1), and R is the gas constant (8.314 J mol-1 K-1).
Given values:
P1 = 1 atm
P2 = 1.5 atm
T1 = 87.3 K
ΔHvap = 6.53 kJ mol-1 = 6530 J mol-1
We need to solve T2. Rearranging the equation for T2:
1/T2 = (ln(P2/P1) * R / ΔHvap) + 1/T1
Plugging in the values:
1/T2 = (ln(1.5/1) * 8.314 / 6530) + 1/87.3
1/T2 ≈ 0.01142
T2 ≈ 87.6 K
The estimated boiling point of argon at 1.5 atm is approximately 87.6 K.

Learn more about the Clausius-Clapeyron equation here: brainly.com/question/2688896

#SPJ11

The estimated boiling point of argon at 1.5 atm is approximately 87.6 K. We can use the Clausius-Clapeyron equation:
ln(P2/P1) = ΔHvap/R * (1/T1 - 1/T2)

R = 8.314 J/mol·K
P1 = 1 atm = 101.325 kPa
T1 = 87.3 K
ΔHvap = 6.53 kJ/mol
P2 = 1.5 atm = 152.0 kPa
First, convert the units of ΔHvap to J/mol:
ΔHvap = 6.53 kJ/mol * 1000 J/kJ = 6530 J/mol
Substituting the values into the equation and solving for T2:
ln(152.0 kPa/101.325 kPa) = 6530 J/mol / (8.314 J/mol·K) * (1/87.3 K - 1/T2)
ln(1.5) = 785.5 K / (8.314 J/mol·K) * (1/87.3 K - 1/T2)
0.4055 = 94.41 * (1/87.3 K - 1/T2)
0.004296 K = 1/T2 - 0.011463 K
1/T2 = 0.011463 K + 0.004296 K = 0.01576 K
T2 = 1 / 0.01576 K = 63.4 K
Therefore, the estimated boiling point of argon at 1.5 atm is 63.4 K.

To estimate the boiling point of argon at 1.5 atm, we can use the Clausius-Clapeyron equation:
ln(P2/P1) = (ΔHvap/R) * (1/T1 - 1/T2)
where P1 and P2 are the initial and final pressures (in atm), T1 and T2 are the initial and final boiling points (in K), ΔHvap is the enthalpy of vaporization (in J mol-1), and R is the gas constant (8.314 J mol-1 K-1).
Given values:
P1 = 1 atm
P2 = 1.5 atm
T1 = 87.3 K
ΔHvap = 6.53 kJ mol-1 = 6530 J mol-1
We need to solve T2. Rearranging the equation for T2:
1/T2 = (ln(P2/P1) * R / ΔHvap) + 1/T1
Plugging in the values:
1/T2 = (ln(1.5/1) * 8.314 / 6530) + 1/87.3
1/T2 ≈ 0.01142
T2 ≈ 87.6 K
The estimated boiling point of argon at 1.5 atm is approximately 87.6 K.

Learn more about the Clausius-Clapeyron equation here: brainly.com/question/2688896

#SPJ11

Based on the terms you provided, it seems like you are working on a lab experiment to separate three compounds - 3-Nitroaniline, Benzoic Acid, and Naphthalene. The data you collected includes the initial mixture composition with 0% Nitroaniline, 95% Naphthalene, and 5% Benzoic Acid. You also recovered 0.95g of Naphthalene and 0.95g of Benzoic Acid.

To calculate the mass of Nitroaniline, you can subtract the masses of Naphthalene and Benzoic Acid from the initial mixture mass. Therefore, the mass of Nitroaniline would be:
Mass of Nitroaniline = Mass of initial mixture - Mass of Naphthalene - Mass of Benzoic Acid
Mass of Nitroaniline = 100g - 95g - 0.95g
Mass of Nitroaniline = 3.05g
To calculate the percentage of Benzoic Acid recovered, you can use the formula:
% Recovery = (Mass of recovered compound / Mass of initial compound) x 100
Therefore, the percentage of Benzoic Acid recovered would be:
% Recovery = (0.95g / 1g) x 100
% Recovery = 95%

learn more about Nitroaniline here

https://brainly.com/question/17114364?referrer=searchResults

#SPJ11

Data And Report Submission Separation Of 3-Nitroaniline, Benzoic Acid, And Napthalene (2pts) Separation of Benzoic Acid, Nitroaniline; and Naphthalene Are YOU completing thhis expenment cnline? Data Collection MA of the Oridinal NAtnce utmixtult= naphthal 0/95 DAd Tecvened e-AMtcanmca 026 5 Mass of recovered benzoic acid 0,/95 (12pts) Calculations (3pts} mass nanhthalene oricina (3pts; by Mass nitroaniline crigina samm (Jpts} MM hemzalc: Acle ucIa $amole (3pts} percen: eccvered Spts) Post Lab Questions (Spts} Youfing separatcry funnel hume hocd Thera <re clearlytwo visic avers Mescrite Methodyou coulduse dererm which aqueoue Natme IlY X *_ Fi= 01 O (1Dpts) It vouhad mixture 0f butyri acid andherane; hc would yo- separate Ihetwo compounds?

A. 85.75% carbon . The percent by mass of carbon in the hydrocarbon, first, we need to find the mass of carbon in the sample. We are given the mass of hydrogen as 2.86 g. Since the hydrocarbon contains only carbon and hydrogen, the remaining mass must be carbon.

To find the percent by mass of carbon in the hydrocarbon, we first need to calculate the mass of carbon in the sample.

Mass of carbon = Total mass of sample - Mass of hydrogen in the sample

Mass of carbon = 20.0 g - 2.86 g

Mass of carbon = 17.14 g

Now we can calculate the percent by mass of carbon:

Percent by mass of carbon = (Mass of carbon / Total mass of sample) x 100%

Percent by mass of carbon = (17.14 g / 20.0 g) x 100%

Percent by mass of carbon = 85.7%

Therefore, the correct answer is A. 85.75 carbon.

Learn more about hydrocarbon here:

https://brainly.com/question/30907363

#SPJ11

If the Kb of a weak base is 4.4×10^(-6) and the ph of a 0.39 m solution of this base is approximately 10.61.

to find the pH of a 0.39 M solution of this base, follow these steps:

1. First, use the Kb expression: Kb = [OH^(-)][BH(+)] / [B]
2. Assume x moles of the base react to form OH^(-) and BH(+). So, [OH^(-)] = [BH(+)] = x, and [B] = 0.39 - x.
3. Substitute values into the Kb expression: 4.4×10^(-6) = x^2 / (0.39 - x)
4. Since Kb is very small, we can assume that x is much smaller than 0.39, so the equation becomes: 4.4×10^(-6) ≈ x^2 / 0.39
5. Solve for x: x = √(4.4×10^(-6) × 0.39) ≈ 4.09×10^(-4)
6. Calculate the pOH: pOH = -log10(x) = -log10(4.09×10^(-4)) ≈ 3.39
7. Calculate the pH: pH = 14 - pOH = 14 - 3.39 ≈ 10.61

The pH of a 0.39 M solution of this weak base with a Kb of 4.4×10^(-6) is approximately 10.61.

Learn more about Kb of a weak base at  brainly.com/question/14980991

#SPJ11

The percentage ionization of a 0.150 M solution of NH3 at 25°C is approximately 0.0194%.

The base ionization constant, Kb, for NH3 is 1.8 x 10^-5. This means that NH3 partially ionizes in water to form OH- ions. To calculate the percentage ionization, we can use the equation for Kb: Kb = [OH-][NH3]/[NH4+].

Since NH3 is a weak base, we can assume that the change in concentration of NH3 due to ionization is negligible compared to the initial concentration of NH3.

Therefore, we can approximate the concentration of NH3 as its initial concentration, which is 0.150 M. Substituting the values into the equation and solving for [OH-], we get [OH-] ≈ 1.8 x 10^-6 M. Finally, we can calculate the percentage ionization as ([OH-]/[NH3]) x 100, which is approximately 0.0194%.

For more questions like Concentration click the link below:

https://brainly.com/question/10725862

#SPJ11

The factor by which the RMS speed changes when the temperature (T) of a gas doubles is given by the square root of 2, or approximately 1.414.

The RMS (root mean square) speed of a gas is directly related to its temperature by the equation v_rms = √(3kT/m), where k is the Boltzmann constant and m is the mass of a single molecule. When the temperature (T) doubles, the new RMS speed becomes v'_rms = √(3k(2T)/m).

To find the factor by which the RMS speed changes, divide the new RMS speed by the original: v'_rms/v_rms = √(3k(2T)/m) ÷ √(3kT/m) = √2. Thus, when the temperature doubles, the RMS speed changes by a factor of √2 or approximately 1.414.

To know more about RMS speed click on below link:

https://brainly.com/question/12896215#

#SPJ11

Examples of glycosaminoglycans (GAGs) include hyaluronic acid, chondroitin sulfate, dermatan sulfate, heparan sulfate, and keratan sulfate.

Glycosaminoglycans (GAGs) are heteropolysaccharides composed of repeating disaccharide units, which have specific characteristics that allow them to be identified as GAGs. Examples of glycosaminoglycans include:

1. Hyaluronic acid
2. Chondroitin sulfate
3. Keratan sulfate
4. Dermatan sulfate
5. Heparan sulfate
6. Heparin

These GAGs can be found in various connective tissue, cartilage, and the extracellular matrix, playing essential roles in maintaining the structure and function of these tissues.

To know more about Glycosaminoglycans:

https://brainly.com/question/13887418

#SPJ11

At a wave length of 605 nm, hemoglobin is significantly higher than cytochrome. Cytochrome is significantly higher at a wavelength of 530 nm.

If the solution is dilute, there may be a lower concentration of both hemoglobin and cytochrome c, which could make it easier to measure at a higher wavelength such as 430 nm. This is because absorbance is directly proportional to concentration, so a lower concentration of molecules will result in a lower absorbance. Measuring at a higher wavelength may also reduce interference from other compounds in the solution that absorb at lower wavelengths.

Regarding ion exchange chromatography, this technique separates molecules based on their charge, which is related to their chemical properties. By using a charged resin, molecules with different charges can be separated and collected in different fractions. The choice of which wavelength to measure absorbance at may depend on the specific properties of the molecules being separated and the conditions of the experiment.

Find out more on cytochrome here: https://brainly.com/question/24042339

#SPJ1

Buffer 2 has higher capacity, both buffers resist pH changes better than DI water, adding acid lowers pH, Buffer 2 initially responds to base but then exceeds capacity, Buffer 1 is overwhelmed by base, and capacity was calculated using Henderson-Hasslcelbah equation and compared to experimental data.

The capacity of the more concentrated Buffer 2 is higher than that of the diluted solution, whereas the capacity of Buffer 1 is approximately the same for both the diluted and concentrated solutions.

The buffers are more effective than DI water because they can resist changes in pH by accepting or donating protons. Adding an acid to both Buffer 1 and 2 results in a decrease in pH, indicating that the buffer capacity is being utilized. Adding a base to Buffer 1 results in an increase in pH, indicating that the buffer capacity is being exceeded. However, adding a base to Buffer 2 initially results in a slight decrease in pH, indicating that the buffer capacity is being utilized, but then the pH increases rapidly, indicating that the buffer capacity is being exceeded.

The capacity of the buffer can be calculated using the Henderson-Hasselbalch equation:

Capacity = (Buffer Concentration) x (ΔpH/Δlog[Base/Acid])

Experimental data can be compared to the calculated capacity to determine the accuracy of the buffer preparation and measurement.

To know more about buffer, here

brainly.com/question/22821585

#SPJ4

The concentration of PO₄³⁻(aq) in a saturated aqueous solution of Cu₃(PO₄)₂(s) is approximately 4.61 x 10⁻⁸ M.

To calculate the concentration of PO₄³⁻(aq) in a saturated aqueous solution of Cu₃(PO₄)₂(s), you can use the Ksp expression for the dissolution of Cu₃(PO₄)₂:

Ksp = [Cu²⁺]³[PO₄³⁻]²

Given that Ksp = 1.40 x 10⁻³⁷, let x represent the concentration of PO₄³⁻:

[Cu²⁺] = 3x
[PO₄³⁻] = x

Substitute these values into the Ksp expression:

1.40 x 10⁻³⁷ = (3x)³ * (x)²

Now, solve for x (concentration of PO₄³⁻):

x⁵ = 1.40 x 10⁻³⁷ / 27
x = (1.40 x 10⁻³⁷ / 27)^(1/5)
x ≈ 4.61 x 10⁻⁸ M

The concentration of PO₄³⁻(aq) in a saturated aqueous solution of Cu₃(PO₄)₂(s) is approximately 4.61 x 10⁻⁸ M.

Learn more about Ksp expression here: https://brainly.com/question/29557204

#SPJ11

It can neutralize a mass of HCl equal to 0.326 g before the pH falls below 9.00.

For the first buffer solution of 110.0 ml containing 0.105 M NH₃ and 0.125 M NH₄Br, it can neutralize a mass of HCl equal to 0.162 g before the pH falls below 9.00. For the second buffer solution of the same it can neutralize a mass of HCl equal to 0.326 g before the pH falls below 9.00., 0.260 M NH₃, and 0.400 M NH₄Br, it can neutralize a mass of HCl equal to 0.326 g before the pH falls below 9.00.

To calculate the mass of HCl that can be neutralized, we need to calculate the moles of NH₃ and NH₄Br in the buffer solution and find the limiting reagent. Then, we can use the balanced equation between NH₃, NH₄⁺, and HCl to find the moles of HCl that can be neutralized. Finally, we can convert the moles of HCl to grams using the molar mass of HCl.

For the first buffer solution, the moles of NH₃ and NH₄Br are 0.0116 and 0.0138, respectively. Since NH₃ is the limiting reagent, we can use the balanced equation NH₃ + HCl → NH₄⁺ + Cl⁻ to find that 0.0116 moles of HCl can be neutralized. Converting moles of HCl to grams gives us 0.162 g.

For the second buffer solution, the moles of NH₃ and NH₄Br are 0.0286 and 0.0440, respectively. Again, NH₃ is the limiting reagent, and using the balanced equation gives us 0.0286 moles of HCl neutralized. Converting to grams gives us 0.326 g.

learn more about neutralize here:

https://brainly.com/question/27891712

#SPJ11

The hardness of water in units of mg/L of CaCO₃, given that your titration at pH = 10 resulted in a concentration of 15 mmol/L, is 1500 mg/L.

To calculate the hardness of water in mg/L of CaCO₃, we can use the following formula:

Hardness (mg/L CaCO₃) = Concentration (mmol/L) * Molecular Weight of CaCO₃ * 1000

The molecular weight of CaCO₃ is 100.0869 g/mol. Given that the titration at pH = 10 resulted in a concentration of 15 mmol/L, we can now calculate the hardness:

Hardness = 15 mmol/L * 100.0869 g/mol * 1000 mg/g
Hardness = 1500.304 mg/L

Rounding the answer to the nearest whole number, we get:

Hardness = 1500 mg/L

So, the hardness of the water is 1500 mg/L of CaCO₃.

Learn more about hardness of water here: https://brainly.com/question/30322659

#SPJ11

The hydrolysis of aspartame in an aqueous solution of HCl would result in the formation of its constituent amino acids, aspartic acid and phenylalanine, as well as methanol, and chloride ions. Acid/base equilibrium should be considered when drawing the reaction products.

If aspartame were completely hydrolyzed in an aqueous solution of HCl, several products would be obtained due to the presence of multiple hydrolyzable bonds. Aspartame contains two peptide bonds that can be hydrolyzed by acid. The hydrolysis of these bonds would result in the formation of the amino acids aspartic acid and phenylalanine. Additionally, aspartame contains an ester bond that can also be hydrolyzed by acid. This would result in the formation of methanol and the dipeptide aspartyl phenylalanine.
It is important to consider acid/base equilibrium when drawing the reaction mechanism for this hydrolysis. In an aqueous solution of HCl, the acid will dissociate into H+ and Cl- ions. The H+ ions will then react with the aspartame molecule, protonating the peptide bonds and ester bonds. This will make the bonds more susceptible to nucleophilic attack by water molecules, resulting in the hydrolysis of the bonds and the formation of the aforementioned products. The equilibrium of the reaction will depend on the concentration of the H+ ions and the rate of hydrolysis relative to the rate of the reverse reaction.

Learn more about aqueous solution here:

https://brainly.com/question/26856926

#SPJ11