At a _________ light, after checking to the rear, stop before entering the intersection or at the stop bar. If the stop cannot be made safely, proceed through the intersection with caution.

Answer: Force

In physical science, a force is something that acts on an object by pushing or pulling it. If the force is strong enough, it changes the position or shape of the object. Forces such as friction, air resistance and simple physical contact touch the object directly, while forces like gravity, magnetism and electrostatics act on the object from a distance. Force is a vector quantity, meaning you can measure both its strength and its direction. The formula to find the measure of a force is force = mass times acceleration, written as f = ma.

Velocity

The faster something is moving, the higher its velocity.

When an object is moving, one way to measure how fast it is moving is by finding its velocity, which is the rate at which it is changing position. Like force, velocity is a vector quantity, so it includes direction. To find the average velocity of an object, divide the change in its position by the time the movement took, and state its direction. For example, if a car is driving north and in one hour's time it travels 30 miles, its velocity is 30 miles per hour, north.

\_:Peepato1234:_/

Endothermic processes occur when heat is applied to a substance, as in melting, evaporation, and sublimation. Heat increases the speed of the molecules in this case, forcing them to travel quicker.

Thermal energy is the energy contained inside a system that controls its temperature. The passage of thermal energy is defined as heat. Thermodynamics is a discipline of physics that deals with how heat is transmitted between various systems and how work is done in the process (see the first law of thermodynamics).

Thermal energy transmission is classified into three types: conduction, radiation, and convection. Convection is a cyclical process that happens exclusively in liquids.

Learn more about   thermal energy to visit this link

https://brainly.com/question/18989562

#SPJ4

Answer:

To solve this problem, you can use the formula F = ma, where F is the force applied to an object, m is the mass of the object, and a is the acceleration of the object. In this case, the force applied to the object is 51.3 newtons and the acceleration of the object is 48.7 m/s2. So, you can set up the equation like this:

51.3 newtons = m x 48.7 m/s2

To solve for the mass of the object, you can divide both sides of the equation by 48.7 m/s2:

51.3 newtons / 48.7 m/s2 = m x 48.7 m/s2 / 48.7 m/s2

This simplifies to:

1.05 kg = m

So, the mass of the softball is approximately 1.05 kilograms.

The solution is 14.4 N

Steps:

 The given values are:

      mass

m=12kg

Acceleration

a=1.2m/s²

As we know te formula

  ⇒force=mass×acceleration

By substituting the values we get,

⇒1.2×1.2

⇒14.4N

To lern more about accelaeration refers to:  

 https://brainly.com/question/30186134

  SPJ4

By looking at the brightness of two stars, astronomers can compare the relative distance of the two stars from Earth.

Who are astronomers?

Astronomers are scientists who study the universe and its phenomena. They observe, analyze, and interpret astronomical data to understand the physical and chemical properties of celestial bodies and their evolution over time. Astronomers use a variety of tools and techniques, including powerful telescopes, spectroscopy, and computer-based analysis, to explore the universe.

Step 1: Write the equation in the form of y= mx + b.

I = k/d^2

y = k/d^2

Step 2: Substitute the given values for k and m.

y = 16/d^2

Step 3: Graph the equation by plotting points for various values of d.

We can plot points for various values of d. For example:

d = 1, y = 16

d = 2, y = 4

d = 3, y = 16/9

d = 4, y = 1

d = 5, y = 16/25

We can plot these points on a graph and connect them with a smooth curve.

To know more about astronomers,

https://brainly.com/question/14276202

#SPJ4

Because alkylbenzenes, phenols, and thiophenols all share an aromatic hydrocarbon constituent, the answer to this question is A.

Compounds 1 and 2 are both used to create liposomes, and their kinetics are controlled. Compound 1 are controlled kinetically, whereas those made from Compound 2 are controlled thermodynamically. UV lasers like nitrogen lasers (337 nm) and frequency-tripled and quadrupled Nd:YAG lasers are frequently used in MALDI methods (355 nm and 266 nm respectively). An artificial substrate for lactase is hydrolyzed to extract lactase from dietary supplement tablets, which is then measured using a colorimetric assay (ortho-nitrophenol-beta-D-galactopyranoside, ONPG). Because alkylbenzenes, phenols, and thiophenols all share an aromatic hydrocarbon constituent, the answer to this question is A.

The complete question is- What is the reading of the energy meter in Figure 1 when an appropriate laser is used in PAC to dissociate a particular chemical bond?

Learn more about hydrocarbon here-

https://brainly.com/question/17578846

#SPJ4

Answer:

$4.80

Explanation:

Total energy used is found with this formula:
[tex]E = Pt[/tex]

where:
[tex]E[/tex] is energy (in kilowatt-hours)
[tex]P\\[/tex] is power ( in Kilowatts)
[tex]t[/tex] is time ( in Hours)

We can find the total power consumption by adding all the appliances, then dividing by 1000 to convert it from Watts to Kilowatts:

[tex]\frac{(40*2)+120}{1000} =0.2kW[/tex]

And then find [tex]E[/tex] with 5 hours a day for 30 days:

[tex]E= 0.2*(5*30)=30kWh[/tex]

Thus, cost needed would be:

$0.16 × 30 = $4.80

The minimum amplitude of the resultant pulse is 10 cm.

The amplitude of a pulse is the maximum height of the waveform measured from the baseline, also known as the peak-to-peak amplitude. In the case of two pulses, A and B, the minimum amplitude of the resultant pulse is determined by the vector sum of the individual amplitudes of the two pulses.

When two pulses are in phase, the resultant pulse amplitude is the sum of the individual amplitudes, which in this case is 20 cm + 10 cm = 30 cm.

However, if the two pulses are out of phase, the minimum amplitude of the resultant pulse is determined by the difference between the amplitudes of the two pulses. In this case, the minimum amplitude of the resultant pulse would be |20 cm - 10 cm| = 10 cm.

So, the minimum amplitude of the resultant pulse is 10 cm.

Learn more about  minimum amplitude in brainly.com/question/26033167

#SPJ1

It is important to note that the dot product and cross product of any two non-zero vectors cannot both be zero therefore  A×B and A·B cannot both be zero.

In vector space, a non-zero vector. V is a vector that differs from the zero vector in V. If u is a non-zero vector in V and an is a scalar, i.e. an element of the field over which V is defined, then au=0 is only possible if a=0.

The product of any two non-zero vectors is non-zero in this vector context. It is referred to as Hamilton's Quaternions. Over the real numbers, quaternions form a four-dimensional vector space, and their multiplication is a combination of dot product and cross product.

Learn more on non-zero vectors here: https://brainly.com/question/24254277

#SPJ1

The term "combined immunodeficiency" refers to a genetic abnormality that affects T cells as well as at least one other kind of immune cell in SCID patients.

According to which immune cells—T, B, and/or NK cells—are damaged, different types of SCID are categorized. The deadly illness known as severe combined immunodeficiency (SCID) is caused by a variety of hereditary factors and is defined by severe impairments in T and B cell activity as well as, in some kinds, NK cell function.

X-SCID B cells typically have normal numbers, but they perform abnormally because IL-21 signaling, which is vital for the B-cell lineage's maturation, differentiation, and activation, is compromised (4, 5). Patients with SCID who receive HLA-identical transplants have a survival rate of about 90%. (3, 6).

To learn more about SCID from given link

https://brainly.com/question/15526421

#SPJ4

Hello there!

Formula: A = F * S = mg * S

So m = A/gS

a) m = 1000 J/(9.81 N/kg * 10 m) ≈ 10.194 kg

b) m = 1250 J/(9.81 N/kg * 1 m) ≈ 127.41 kg

d) m = 1000 J/(9.81 N/kg * 10 m) ≈ 7900.1 kg

e) m = 8900 J/(9.81 N/kg * 215 m) ≈ 4.22 kg

g) m = 98 J/(9.81 N/kg * 59m) ≈ 0.17 kg

h) m = 750 J/(9.81 N/kg * 0.75 m) ≈ 101.94 kg

c) m = 1.25 kJ/(9.81 N/kg * 90 m) = 1250 J/(9.81 N/kg * 90 m) ≈ 1.42 kg

f) m = 90 J/(9.81 N/kg * 1250 m) ≈ 0.007339 kg = 7.339 g

i) m = 5 kJ/(9.81 N/kg * 980 m) = 5000 J/(9.81 N/kg * 980 m) ≈ 0.52 kg

Hello there!

Answer:

3600 J

Explanation:

[tex]E = \frac{mv^2}{2}[/tex]

So m = 50 kg and v = 12 m/s then

[tex]E = \frac{50 * 12^2}{2} J = 3600 J[/tex]

Mass = 50 kg

Velocity = 12 m/s

The kinetic energy of an object.

The formula that is used to find the kinetic energy of an object is given by :

[tex]K = \frac{1}{2}mv^{2} \\K = \frac{1}{2} X 50 X 12^{2} \\K = \frac{1}{2} X 50 X 144[/tex]

A container is said to have breached when it has been overstressed beyond its point of recovery.

To know more about Hazard here

https://brainly.com/question/14367881

#SPJ4

The range of wavelength when m = 3 is λ = 8.20 x 10-7 m to 18.7 x 10-7 m (this belongs to infrared radiations).

The wavenumber of hydrogen spectral series is 1/λ = R(1/m2 – 1/n2)

Rydberg constant, R = 1.097 x 107 m-1

1. When m = 1 and n = 2, 1/λ = 1.097 x 107 x (1/12 – ½2) = 0.822 x 107

Wavelength, λ = 1.215 x 10-7 m

When m = 1 and n = ∞

, 1/λ = 1.097 x 107 x (1/12 – 0) = 1.097 x 107

Wavelength, λ = 0.911 x 10-7 m

The range of wavelength when m = 1 is λ = 0.911 x 10-7 m to 1.215 x 10-7 m (this belongs to ultra-violet radiations)

2. When m = 3 and n = 4, 1/λ = 1.097 x 107 x (1/32 – 42) = 0.0533 x 107

Wavelength, λ = 18.7 x 10-7 m

When m = 3 and n = ∞

1/λ = 1.097 x 107 x (1/32 – 0) = 0.122 x 107

Wavelength, λ = 8.20 x 10-7 m

The range of wavelength when m = 3 is λ = 8.20 x 10-7 m to 18.7 x 10-7 m (this belongs to infra-red radiations)

In physics, the wavelength is the spatial duration of a periodic wave—the distance over which the wave's shape repeats. it is the gap between consecutive corresponding points of the same section on the wave, including two adjoining crests, troughs, or 0 crossings, and is a feature of each traveling wave and standing wave, as well as other spatial wave patterns. The inverse of the wavelength is known as the spatial frequency. Wavelength is normally exact by means of the Greek letter lambda (λ). The time period wavelength is also now and again implemented to modulated waves, and to the sinusoidal envelopes of modulated waves or waves fashioned with the aid of interference of several sinusoids.

Assuming a sinusoidal wave shifting at a set wave speed, the wavelength is inversely proportional to the frequency of the wave: waves with better frequencies have shorter wavelengths, and decreased frequencies have longer wavelengths.

To learn more about Wavelength visit here:

brainly.com/question/13533093

#SPJ4

The height formed by this 25-foot ladder that leans against a wall is 24 feet.

To find out how far up a wall a ladder will reach, you can use the Pythagorean theorem. The Pythagorean theorem states that in a right triangle, the square of the length of the hypotenuse (the side opposite the right angle) is equal to the sum of the squares of the other two sides. In this case, the ladder forms one side of the triangle, the wall forms another side, and the distance between the base of the ladder and the wall forms the hypotenuse.

Let's call the height of the wall h. Using the Pythagorean theorem, we can set up the following equation:

(25 ft)^2 = h^2 + (7 ft)^2

625 = h^2 + 49

576 = h^2

h = sqrt(576) = 24 ft

Therefore, a 25 ft ladder that is 7 feet from the wall will reach 24 feet up the wall.

Learn more about determining the height of a ladder based on its length and the distance of its base from a wall here: https://brainly.com/question/13734303

#SPJ4

Two charged particles are located on the x axis.

What are charged particles?

Charged particles are particles that have either a positive or negative electrical charge. These particles can be found in many forms in nature, such as electrons, protons, and ions. These particles are a key component of electricity, and can be used as a source of energy. Charged particles can be found in atoms and molecules, where they interact with other particles and affect their behavior. They can also be found in plasma, a state of matter that is made up of ions and electrons.

1. Start by writing out the equation for the electric field at the origin:

E = (kQ)/r^2

2. Substitute in the values for Q, k, and r, and solve for the unknown charge:

E = (2keQ)/a^2

E = (2k(+Q))/(3a)^2

+Q = (2kE)/(3a)^2

Since the electric field has a magnitude of 2keQ / a2, the unknown charge can be either positive or negative:

+Q = ±(2kE)/(3a)^2

To know more about charged particles,

https://brainly.com/question/10183222

#SPJ4

the scale's readout if indeed the elevator is decelerating faster than 160 lb .

Your perceived weight is equal to the normal force.Therefore, whenever the elevator accelerates or upwards downward, you truly feel tiny bit heavier than normal and a little lighter than usual.

Any jump you make would only slow the lift's descent to the ground by a very small amount.Even though you could jump perfectly timed and with all the force your legs could produce, it would be pointless.Your greatest option, as opposed to jumping, is to fold down.

to know more about elevator visit:

https://brainly.com/question/29477960

#SPJ4

Answer:

252 km/hr

70 m/s

Explanation:

s = d/t

answer in km/hr:

s = 1638 km / 6.5 hr = 252 km/hr

if you need the answer in m/s:

s = ((1638 km)(1000 m/km)) / ( (6.5 hr)(60 min/hr)(60 s/min))

  = 70 m/s

1. The capacitor charge Q is decreasing while the current I is positive is false

2. If the measured voltage in 2 is negative when the current I is positive, it is false.

3. When the measured VOLTAGE IN1 is positive, the capacitor charge Q is positive, which is True.

4. When the RELAY is thrown to the position N.O is False, the capacitor charge Q rapidly decays to zero.

5. This experiment's transient currents flow exponentially decrease to zero, which is false

A capacitor is a type of electric device that can charge and store electrical energy when a voltage is applied to its terminals.

Formulas link the applied voltage to the capacitor's charge Q and currents I.

The final formula shows that while the current is positive, the capacitor's voltage is positive (increasing) and the

Q=CV

I=dQ/dt=C(dQ/dt)

The charge is rising.

As a result, the question's assertion is false.

As the currect is flowing from VOLTAGE IN 2 to VOLTAGE IN 1 it will be positive.

As a result, the question's assertion is false.

The measured VOLTAGE IN1 is positive when the capacitor charge Q is positive.

As a result, the question's assertion is True.

The position of the relay is the N.O. position which stands for "normally opened", i.e. no current can flow through it.

As a result, the question's assertion is false.

The following formula provides the transient current flow in this experiment:

[tex]i=i_0e^{\frac{-t}{RC}}[/tex]

As a result, the question's assertion is false.

For such more question on capacitor charge.

https://brainly.com/question/27393410

#SPJ4

Note: The diagram of the question is added bellow,

As the values are closed to each other, Jane's measurements are precise.

The precision of a substance is defined as the degree to which two or more measurements agree with one another.

It is incredibly precise but not always accurate to measure something if you measured it five times and get around 1.50 cm each time. Accuracy is not necessary for precision. There are various categories of precision:

Learn more about precision here:

https://brainly.com/question/28336863

#SPJ1

R= 2+4=6Ω

in series connection, same current and different voltage

total voltage= total current × total resistance

6=I×6

I=6/6= 1A

voltage across 4Ω resistor= 1×4=4v

Therefore, heat dissipated by the 4Ω resistor in 5s= (v²/R)×t= (4²/4)× 5 = 16/4 × 5 = 20J

The magnitude of the point charge is 12.03 × 10⁻¹² C and the electric field at 15.0m is 4.63 × 10⁻² N/C.

A point charge creates a 16,000 N/C electric field at a distance equal to 0.260 m.

E = 16,000 N/C

r = 0.260 m

k = 8.99 × 10⁹

To calculate the point charge,

E = kq/r²

16000 = 8.99 × 10⁹ × q / (0.26)²  

q = 16000 × 0.0676 / 8.99 × 10⁹

q = 10816 / 8.99 × 10⁹

q = 12.03 × 10⁻¹² C

When r= 15.0 m

E = kq/r²

E =  8.99 × 10⁹ × 12.03 × 10⁻¹² / (15)²

E = 0.4630 × 10⁻³

E = 4.63 × 10⁻² N/C

To know more about electric field here

https://brainly.com/question/14478005

#SPJ4

In a year, the earth revolves around the sun once in a circular motion. Therefore, the earth will orbit the sun at a 2.95 m/s speed.

Planets in our solar system did not appear out of thin air. Neither did the sun. They were all a part of a large cloud of gas and dust. Gravity accumulated a lot of material in the center to form the sun. As it spun around the forming sun, the extra matter clashed and gathered together. Some would be capable of attracting more gas and dust, eventually forming planets, because to their powerful gravitational forces.

The answer to the query is

v = 2πR / T

2R equals 6.28 * 9.3 * 107 miles.

T = 24 * 3600 * 365 = 3.15 × 10⁷ sec

v = 9.3 / 3.15 = 2.95 m/s.

Hence, the earth's speed of the earth around the sun will be 2.95 m/s.

To know more about earth on

https://brainly.com/question/27722273

The horizontal displacement of the cannonball  is  65.75 meter.

Speed is characterized as the rate at which an object's position changes in any direction. The distance travelled in relation to the time it took to travel that distance is how speed is defined. Due to having no direction and only having magnitude, speed is a scalar quantity With SI unit meter/second.

original speed: u= 35.9 m/s.

acceleration due to gravity: g = 9.8 m/s².

Initial height of the cannonball = 166 m.

Hence,  the horizontal displacement of the cannonball = u²/2g

= 35.9²/(2×9.8) meter

= 65.75 meter.

so, the displacement of the cannonball  is  65.75 meter.

Learn more about speed here:

https://brainly.com/question/28224010

#SPJ1

Answer:

15 seconds :)

Explanation:

The final speed of the second car is '2v' and the collision is elastic collision.

The elastic collision is one in which the system does not experience a net loss of kinetic energy as the result of a collision. In elastic collisions, momentum & kinetic energy are both conserved.

v′ = m1v1 + m2v2 /m1+m2

v ′ = m 1 v 1 + m 2 v 2/ m 1 + m 2

in which m1 is mass of body 1, v1 is its initial speed, m2 is mass of body 2, & v2 is the final speed at which the two objects will be moving after colliding.

m1v +0 = mv/3 +m/3v2

v2 = 2v

To know more about elastic collision visit:-

https://brainly.com/question/12644900

#SPJ4

Moment of momentum, which describes the rotating inertia of a system moving about an axis, gauges an object's propensity to keep spinning.

List the object's mass and speed in step one. Convert any values into SI units in step two (kg, m, s). Step 3: To calculate an object's momentum, multiply the object's mass and velocity.

Momentum can go wrong. As a vector quantity with both magnitude and direction, momentum has both. The sign, positive or negative, in physics serves as a cue as to the direction. Positive amounts normally signify a forward or upward motion, whereas negative quantities typically indicate a backward or downward motion.

to know more about momentum here:

brainly.com/question/24030570

#SPJ4

What is moment momentum?

The expression for drag force that is proportional to the speed of the object is known as linear drag, while the expression that is proportional to the square of the speed is known as quadratic drag.

To learn more about linear drag refer:

brainly.com/question/29165075

#SPJ4