Assume that, when we walk, in addition to a fluctuating vertical force, we exert a periodic lateral force of amplitude 25 NN at a frequency of about 1 HzHz. Given that the mass of the bridge is about 2000 kgkg per linear meter, how many people were walking along the 144-mm-long central span of the bridge at one time, when an oscillation amplitude of 75 mmmm was observed in that section of the bridge

Answer:

7,539 m/s

Explanation:

Let's use this equation to find the gravitational acceleration of this space shuttle:

We know that G is the gravitational constant: 6.67 * 10^(-11) Nm²/kg².

M is the mass of the planet, which is Earth in this case: 5.972 * 10^24 kg.

r is the distance from the center of Earth to the space shuttle: radius of Earth (6.3781 * 10^6 m) + distance above the Earth (630 km → 630,000 m).

Plug these values into the equation:

Remove units to make the equation easier to read.

Multiply the numerator out.

Add the terms in the denominator.

Simplify this equation.

The acceleration due to gravity g = 8.11045189 m/s². Now we use the equation for acceleration for an object in circular motion which contains v and r.

a = g, v is the velocity that the space shuttle should be moving (what we are trying to solve for), and r is the radius we had in the previous equation when solving for g.

Plug these values into the equation and solve for v.

Remove units to make the equation easier to read.

Multiply both sides by 7,008,100.

Take the square root of both sides.

The shuttle should be moving at a velocity of about 7,539 m/s when it is released into the circular orbit above Earth.

Answer:

Valence electrons are always located in the outer most energy level.

Explanation:

Valence electrons are the ones that are involved in chemical bonds. In order to take part in a chemical bonding, the outermost/valence electron needs to be involved. Thus, the answer is Valence electrons are always located in the outer most energy level.

Answer:

C

Explanation:

covalent. Hope that helps!

Answer:

A. 20

Explanation:

The AWG rating of the wire can be determined by applying the formula;

[tex]d_{i}[/tex] = 0.005 x [tex]92^{\frac{(36 - s)}{39}} }[/tex]

where [tex]d_{i}[/tex] is the diameter of wire in inches, and s is the diameter of wire in AWG.

Given that [tex]d_{i}[/tex] = 0.032 inches, then;

0.032 = 0.005 x [tex]92^{\frac{(36 - s)}{39}} }[/tex]

[tex]\frac{0.032}{0.005}[/tex] =  [tex]92^{\frac{(36 - s)}{39}} }[/tex]

6.4 = [tex]92^{\frac{(36 - s)}{39}} }[/tex]

Find the log of both sides to have,

log 6.4 = log [tex]92^{\frac{(36 - s)}{39}} }[/tex]

log 6.4 = [tex](\frac{36 -s}{39})[/tex] log 92

[tex]\frac{log 6.4}{log92}[/tex] = [tex](\frac{36 -s}{39})[/tex]

0.410523 = [tex](\frac{36 -s}{39})[/tex]

36 - s = 0.410523 x 39

         = 16.0104

⇒ s = 36 - 16.0104

      = 19.9896

s = 20

Therefore, the AWG of the wire is 20.

Answer:

yes

Explanation:

Answer:

60

Explanation:

Every 60 minutes is an hour

Answer:

60; minute in 1 HR is the answer

Answer: your answer is B I know that's what you picked but I believe it is correct! look below...

Explanation: A solution is made when one substance called the solute "dissolves" into another substance called the solvent. Dissolving is when the solute breaks up from a larger crystal of molecules into much smaller groups or individual molecules.

In order to form a solution, the solute must be surrounded, or solvated, by the solvent. Solutes successfully dissolve into solvents when solute-solvent bonds are stronger than either solute-solute bonds or solvent-solvent bonds.

BRAINLIEST?

Answer:

can you include a picture

Decompose the forces acting on the rocket in horizontal and vertical components.

• net horizontal force:

∑ F = (12.3 N) cos(65°) - 2.5 N ≈ 2.7 N

(notice we're taking "to the right" to be the positive direction)

• net vertical force:

∑ F = (12.3 N) sin(65°) - 1.2 N ≈ 9.9 N

The resultant force then has magnitude

√((2.7 N)² + (9.9 N)²) ≈ 10.3 N

Since the horizontal and vertical components of the resultant are both positive, it points at an angle between 0° and 90° from the positive horizontal, so that

tan(θ) ≈ (9.9 N) / (2.7 N) ≈ 3.69

===>   θ ≈ arctan(3.69) ≈ 75°

Answer:

The value  [tex]F  =  0.1396 \ N [/tex]

Explanation:

From the question we are told that

   The volume blood  ejected is  [tex]V = 65 \ cm^3 = 65*10^{-6} \ m^3[/tex]

    The velocity of the blood ejected is  [tex]v = 103 \ cm/s = \frac{103}{100} = 1.03 \ m/s[/tex]

    The density of blood is  [tex]\rho = 1060 \ kg/m^3[/tex]

     The heart beat is [tex]R = 59 \ bpm(beats \ per \ minute) = \frac{59}{60}= 0.9833\ bps[/tex]

The average force exerted by the blood on the wall of the aorta is mathematically represented as

      [tex]F = 2 * \rho * V * R * v[/tex]

=>    [tex]F  =  2 * 1060  *  65*10^{-6}  *  0.9833 *  1.03[/tex]

=>    [tex]F  =  0.1396 \ N [/tex]

Answer:

66.475kJ

Explanation:

Work done is the product of the force and perpendicular distance in direction of the force.

Work done = Force × distance

Given

Weight = 700lb

Distance = 70ft

1lb force = 4.448N

700lb force = 700(4.448) = 3113.6N

Distance = 70(0.305) = 21.35m

Work done = 3113.6×21.35

Work done ≈ 66,475Joules

Work done = 66.475kJ

Answer:

Explanation:

Electrical energy is the correct answer

Answer:

Is B

Explanation:

Answer:

The force is [tex]F = 0.1441 \ N[/tex]

Explanation:

From the question we are told that

   The volume of blood ejected is  [tex]V_b = 65cm^3 = 65*10^{-6} \ m^3[/tex]

    The velocity of the ejected blood is  [tex]v = 98 cm/ s = 0.98 \ m/s[/tex]

    The mass density of blood is  [tex]\rho = 1060 \ kg/m^3[/tex]

    The heart rate is  [tex]R = 61 bpm(beats \ per \ miunite) = \frac{61}{60} = 1.0667\ bps[/tex]

Generally the average force exerted is mathematically represented as

     [tex]F = 2 * \rho * V_b * R * v[/tex]

=>   [tex]F = 2 * 1060 * (65*10^{-6}) *1.0667 * 0.98[/tex]

=>   [tex]F = 0.1441 \ N[/tex]    

Answer:

The force each one experienced

Explanation:

Hope this helps :)

Answer:

its food this was easy

Answer:

h = 0.697 [m]  

Explanation:

To solve this problem we must use the energy conservation theorem, where it tells us that kinetic energy is converted to potential energy or vice versa.

[tex]E_{kinet}=E_{pot}[/tex]

where:

Ekinet = kinetic energy [J]

Epot = potential energy [J]

[tex]\frac{1}{2}*m*v^{2}=m*g*h\\0.5*(3.7)^{2} =9.81*h\\h =(6.845)/9.81\\h = 0.697 [m][/tex]

Answer:

electrical to thermal and light

(may wanna change the answers)

and the one before that should be electrical to electrical i think

Explanation:

The FitnessGram Pacer Test is a multistage aerobic capacity test that progressively gets more difficult as it continues. The 20 meter pacer test will begin in 30 seconds. Line up at the start. The running speed starts slowly, but gets faster each minute after you hear this signal. A single lap should be completed each time you hear this sound. Remember to run in a straight line, and run as long as possible.

Answer:

The  correct option is D

Explanation:

From the question we are told that

  The intensity of the first  electromagnetic wave is  [tex]I = 18 \ W/m^2[/tex]

  The amplitude of the electric field is  [tex]E_{max}_1 =A[/tex]

   The intensity of the second electromagnetic wave is  [tex]I = 36 \ W/m^2[/tex]

Generally the an electromagnetic wave intensity is mathematically represented as

       [tex]I = \frac{1}{2} * \epsilon_o * c * E_{max}^2[/tex]

Looking at this equation we see that

     [tex]I \ \ \alpha \ \ E^2_{max}[/tex]

=>  [tex]\frac{I_1}{I_2} = [ \frac{ E_{max}_1}{ E_{max}_2} ] ^2[/tex]

=>   [tex]E_{max}_2 = \sqrt{\frac{x}{y} } * E_{max}_1[/tex]

=>  [tex]E_{max}_2 = \sqrt{\frac{36}{18} } * E[/tex]        

=>  [tex]E_{max}_2 = \sqrt{2 } E[/tex]        

Answer:

 N= 3

Explanation:

For this exercise we must use Faraday's law

          E = - dФ / dt

         Ф = B . A = B Acos θ

tje bold indicate vectors. As it indicates that the variation of the field is linear, we can approximate the derivatives

         E = - A cos θ (B - B₀) / t

The angle enters the magnetic field and the normal to the area is zero

         cos 0 = 1

         A = π r²

In the length of the wire there are N turns each with a length L₀ = 2π r

          L = N (2π r)

          r = L / 2π N

    we substitute

          A = L² / (4π N²)

The magnetic field produced by a solenoid is

           B = μ₀ N/L   I

for which

            B₀ = μ₀  N/L   I

The final field is zero, because the current is zero

            B = 0

We substitute

           E = - (L² / 4π N²)  (0 - μ₀ N/L I) / t

           E = μ₀ L I / (4π N t)

           N = μ₀ L I / (4π t E)

The electromotive force is E = 0.80 mV = 0.8 10⁻³ V

let's calculate

           N = 4π 10⁻⁷ 200 1.60 / (4π 0.120 0.8 10⁻³)]

           N  = 320 10⁻⁷ / 9.6 10⁻⁶

           N = 33.3 10⁻¹

          N= 3

Answer:

Equal and opposite

Constant speed

Balanced

Unequal and non-opposite

Unbalanced

Explanation:

Balanced forces can be defined as forces which are equal in size but opposite in direction.

Now, these forces do not cause a change in motion because when they act on an object at rest, such an object will not move. For example, when attempt to push against a wall, the wall will push back with an equal but opposite force and neither you nor the wall will move.

While unbalanced forces are those that cause a change in the motion of an object.

Thus, these forces are said not to be equal and opposite.

Answer:

Explanation:

The the horizontal and vertical component be expressed as;

Fx = Fxos theta (horizontal compt)

Given Fx = 20N

theta = 30°

Get F:

20 = Fcos30

20 = 0.8660F

F = 20/0.8660

F = 23.09N

Get the magnitude of the other components. (vertical compt)

Fy = Fsin theta

Fy = 23.09sin30

Fy = 23.09(0.5)

Fy = 11.545N

Hence the magnitude of the other component is 11.545N

Answer:

here are the options.

Answer:

the energy that is associated with temperature or D

Explanation:

Hope this helps

Answer:

D

Explanation:

because the whole town needs to be powered through some sort of energy and kinetic energy means the movement of something

The technology in the picture represents the conversion of kinetic energy to electrical energy. So, the correct option is D.

Kinetic energy of a body is defined as the energy acquired by the body due to the virtue of its motion.

Here,

The given picture represents the dam system at a town.

We know, according to conservation of energy, energy can neither be created nor be destroyed, but can be transferred from one form to another.

In the dam system, the application of conservation of energy is implemented.

Dam consists of a water stream and turbines. The water stream is arranged in such a way that, when the water is running from a height, the water acquires an energy in the form of kinetic energy.

This kinetic energy of the water is converted to electrical energy with the help of the turbines, which are rotating continuously and thus electricity is produced.

Hence,

The technology in the picture represents the conversion of kinetic energy to electrical energy.

To learn more about kinetic energy, click:

https://brainly.com/question/999862

#SPJ7

[tex]\huge\boxed{OptionA}[/tex]

mass = 4 kg

velocity = 5 m/s^2

Mass= 2kg

Velocity = 7m/s^2

mass = 6 kg

velocity = 4m/s^2

Mass = 8 kg

Velocity = 3 m/s^2

By the equation of kinetic energy,

                                         K.E = [tex]\frac{1}{2} mv^2[/tex]

Where,

            K.E is kinetic energy

            m is mass

            v is velocity

Directly substitute the variables in the equation,

                                       K.E = [tex]\frac{1}{2}x4x5^2[/tex]

Simplify the equation,

                                       K.E = 50 J

 Directly substitude the variable in the equation,

                                        K.E = [tex]\frac{1}{2}x6x4^2[/tex]

Simplify the equation,

                                        K.E = 48J

Substitute the variables in the equation,

                                         K.E = [tex]\frac{1}{2}x8x3^2[/tex]

Simplify the Equation,

                                         K.E = 36J

Substitute the variable,

                                        K.E = [tex]\frac{1}{2}x 2x7^2[/tex]

Simplify the equation,

                                        K.E = 49J

As you can see that the highest value of kinetic energy is of Blue SUV thus it will be out answer.

Answer:

F = 0

Explanation:

Given that,

Force acting to push a bin = 45 N

Mass of the plastic bin, m = 3 kg

The plastic bin is moving with a constant velocity.

We need to find the net force acting on the box. Constant velocity means the change in velocity is equal to 0. It means acceleration will be 0.

As a result, the force acting on the box is equal to 0.

Answer:

26621 km

Explanation:

We are given;

Mass: m = 5.98 x 10^(24) kg

Period; T = 43200 s

Formula for The velocity(v) of the satellite is:

v = 2πR/T

Where R is the radius

Formula for centripetal acceleration is;

a_c = v²/R

Thus; a_c = (2πR/T)²/R = 4π²R/T²

Formula for gravitational acceleration is:

a_g = Gm/R²

Where G is gravitational constant = 6.674 × 10^(-11) m³/kg.s²

Now the centripetal acceleration of the satellite is caused by its gravitational acceleration. Thus;

Centripetal acceleration = gravitational acceleration.

Thus;

4π²R/T² = Gm/R²

Making R the subject gives;

R = ∛(GmT²/4π²)

Plugging in the relevant values;

R = ∛((6.674 × 10^(-11) × 5.98 x 10^(24) × 43200²)/(4 × π²))

R = 26.621 × 10^(6) m

Converting to km, we have;

R = 26621 km

Answer:

2.66 *10^7

Explanation:

Sorry I don't know the process if you were interested in that :/

Answer:

Explanation:

The density of a substance is the ratio of its mass to its volume. Its unit of measurement is kg[tex]m^{-3}[/tex].

i.e density, ρ = [tex]\frac{mass}{volume}[/tex]

1a. To determine the density of the acetic acid, Rachael needs to know the mass and volume of the acid.

i. Measure the mass of the given beaker using the mass balance.

ii. Transfer the acetic acid into the beaker, and measure the new mass using the mass balance.

iii. Subtract the mass of the beaker from the new mass to determine the mass of the acetic acid.

iv. Measure the volume of the acid on the scale of the beaker.

v. Divide the value of the mass by its volume to determine its density of the acetic acid.

b. Given that the density is 1.05 g/[tex]cm^{3}[/tex], and volume is 200 [tex]cm^{3}[/tex].

Then,

density = [tex]\frac{mass}{volume}[/tex]

1.05 = [tex]\frac{mass}{200}[/tex]

mass = 1.05 x 200

         = 210 g

mass = 210 g

2. Length of titanium = 0.40 m

   Area of titanium = 0.05 [tex]m^{2}[/tex]

mass = 90.0 kg

density = [tex]\frac{mass}{volume}[/tex]

But,

volume = area x length

            = 0.05 x 0.4

           = 0.02 [tex]m^{3}[/tex]

density of titanium = [tex]\frac{90}{0.02}[/tex]

                = 4500 kg[tex]m^{-3}[/tex]

Answer: 300m

1 minute = 60s

the unladen swallow can fly: 60.5 = 300 (m)

Explanation: