As discussed in class (and in Hartmann Chapter 4) the exchange of heat and momentum between the atmosphere and the earth surface can be computed using the aerodynamic formula: T = = PcU? CPCU.(T. -T.) (5) SH = LE = LPCU.(9-9-) where UT, and q, are the wind speed, temperature and specific humidity respectively at a reference height (usually 10 m) above the earth surface. T. and q, are respectively the temperature and specific humidity at the surface, co is the aerodynamic exchange coefficient, and L is the latent heat of vaporization of water. (a) Compute the wind stress T, sensible heat flux (SH) and latent heat of evaporation (LE) from the land surface when T. = 30°C, T, = 28°C, 45 = 1.6 x 10-29, = 1.5 x 10-- and U. = 5 ms! Let's assume that the atmospheric boundary layer is unstable (as during the daytime when the land surface is warmer than the air above) so that co = 4 x 10-2. In each case state whether the direction of the flur is toward or away from the surface, and provide the appropriate units for t, SH and LE. (10 points) = = (6) Now repeat the calculations in (a) but over the ocean for T, = 28°C, T, = 30°C, 9. 1.6 x 10-29, = 1.5 x 10-2 and U, = 5 m st. In this case the atmospheric boundary layer is generally stable because the surface is cooler than the air above so co = 1 x 10- In each case state whether the direction of the flux is toward or away from the surface, and provide the appropriate units for T, SH and LE. (5 points) (C) State what kind of turbulence to you would expect to be dominant in the atmospheric boundary layer in each case. (4 points). If the value of a constant or parameter is not given, you will need to look it up in the textbook or online.

Answer:

D) Add 1 to both sides of the equation

Step-by-step explanation:

-11n - 1 = 87

-11n = 87 + 1

Answer:

1. −51,−41,−38,13,41,50

2. $140 each pair of shoes costs $20 (80 divided by 4). 20 times 7 is 140

3. 5x +6y+1

4. 5+15(n) or using instead of using n for hours use h so, 5+15(h)

5. cylinder

Answer/Step-by-step explanation:

-51, -41, -38, 13, 41, 50

140

5x + 6y + 1

5 + 15h

Cube.

Answer:

If rounded to the nearest tenth of a cubic foot, would be: 927587.2

Step-by-step explanation:

The equation of finding the equation of the volume of a sphere is "4π[tex]\frac{radius^{3} }{3}[/tex]"

If values are inserted in for radius as 60.5, the answer will be 927587.2 when rounded to the nearest tenths.

Hope this helps!

Answer:

Sales tax: $52.74

■ Cost/Price before ST: $878.99

■ Total Cost/Price including ST: $931.73

Step-by-step explanation:

The point that satisfies the equation  y+6=x is :

A (−5,1)

The line represented by the equation y+6 = x can be rewritten as x - y = -6. The equation is in the standard form:

Ax + By = C.

The x-intercept and y-intercept can be found using the standard form. Then, plot these points on the graph and draw a straight line between them to complete the graph of the equation.

Using the equation x - y = -6 to find the x-intercept, set y = 0 and solve for x.

Thus, x - 0 = -6x = -6

The x-intercept of the line is (-6, 0).

Using the equation x - y = -6 to find the y-intercept, set x = 0 and solve for y.

Thus, 0 - y = -6y = 6

The y-intercept of the line is (0, 6).

Plot the x-intercept (-6,0) and the y-intercept (0,6) on the coordinate plane. Then, draw the line through these points.

Now, we need to find which point is found on the line represented by the equation y+6 = x.

We can now plug in the values of the points to the equation:

y + 6 = x

x - y = -6(-5) - 1 = -6

The point A (-5,1) satisfies the equation since x - y = -6.

So, the answer is A (−5,1).

To learn more about straight line visit : https://brainly.com/question/25969846

#SPJ11

Preventive medicine services are primarily based on documentation of history, physical examination, and medical decision making.

The correct answer is A) Documentation of history, physical examination, and medical decision making. Preventive medicine services focus on preventing or identifying potential health issues before they become more serious. To determine the appropriate preventive measures, healthcare professionals assess various factors. Among these, documentation of the patient's medical history is crucial to understand their individual health risks and needs.

Physical examination allows for a comprehensive assessment of the patient's current health status, identifying any existing conditions or potential areas of concern. Medical decision making refers to the process by which healthcare providers use the gathered information to determine appropriate preventive measures and interventions. Factors like the patient's age, time spent with the patient, and the final diagnosis may be relevant to specific aspects of healthcare but are not the primary criteria for preventive medicine services.

The focus lies on comprehensive documentation and medical decision making to promote and maintain optimal health.

Learn more about Factors click here :brainly.com/question/25722260

#SPJ11

Answer:

b. 4m+5

Step-by-step explanation:

Answer:

Step-by-step explanation:

(b − 7)(b + 3). SOLUTION: 4. (4n + 3)(n + 9). SOLUTION: 5. (8h − 1)(2h − 3) ... (m. 2. − 5m + 4)(m. 2. + 7m − 3). SOLUTION: 28. (x. 2. + 5x − 1)(5x. 2. − 6x + 1) ... The value of x must be greater than 4. If x = 4 ... c. SYMBOLIC For a sum of the form a + b, write an expression for the square of the sum. ... Then, for five days,.

New Mexico is the correct option with coordinates (-2.5,-1).

To find the midpoint between two points in the Cartesian plane, you can use the midpoint formula. The midpoint formula states that the coordinates of the midpoint between two points (x₁, y₁) and (x₂, y₂) are given by:

Midpoint = ((x₁ + x₂) / 2, (y₁ + y₂) / 2).

Here's a step-by-step process to find the midpoint:

1. Identify the coordinates of the two points you want to find the midpoint between. Let's say the coordinates are (x₁, y₁) and (x₂, y₂).

2. Add the x-coordinates of the two points together: x = x₁ + x₂.

3. Divide the sum by 2 to find the x-coordinate of the midpoint: x = x / 2.

4. Add the y-coordinates of the two points together: y = y₁ + y₂.

5. Divide the sum by 2 to find the y-coordinate of the midpoint: y = y / 2.

6. The coordinates (x, y) obtained from steps 3 and 5 represent the midpoint between the two given points.

In the given questions, we need to find the mid-point of Fairfield(-10,1) & Montgomery, Alabama(5,-3).

Let the point be N, N = ((-10 + 5) / 2, (1 + (-3)) / 2).

N = (-2.5,-1)

Therefore, From the given options ,the point where we stop is New Mexico marked at (-2.5,-1).

For more such questions on coordinates

https://brainly.com/question/31293074

#SPJ8

(a)  The equation of the regression line Percent Body Fat = -42.734 + 1.70 * Waist Size

(b) The higher the R-squared value, the better the regression line fits the data and the stronger the relationship between the variables.

(c) It means that as waist size increases, the percentage of body fat also tends to increase, and vice versa.

(d) The residual associated with this point is approximately -6.766

(a) The equation of the regression line can be written as:

Percent Body Fat = -42.734 + 1.70 * Waist Size

In this equation, Percent Body Fat represents the dependent variable, Waist Size represents the independent variable, -42.734 is the intercept (constant), and 1.70 is the coefficient for the Waist Size variable.

(b) R-squared is a measure of how well the regression line fits the data. In this context, R-squared of 67.8% indicates that 67.8% of the variation in the percent body fat can be explained by the linear relationship with waist size. The higher the R-squared value, the better the regression line fits the data and the stronger the relationship between the variables.

(c) To calculate the correlation coefficient (r), we can take the square root of the R-squared value. In this case, the correlation coefficient would be approximately √(0.678) ≈ 0.823.

Interpretation: The correlation coefficient (r) of 0.823 indicates a strong positive linear relationship between waist size and percent body fat. It means that as waist size increases, the percentage of body fat also tends to increase, and vice versa.

(d) To calculate the residual associated with the point for an individual with a waist size of 35 inches and 10% body fat, we need to substitute the waist size value into the regression equation and calculate the difference between the actual percent body fat and the predicted percent body fat.

Using the regression equation: Percent Body Fat = -42.734 + 1.70 * Waist Size

Substituting Waist Size = 35:

Percent Body Fat = -42.734 + 1.70 * 35 = -42.734 + 59.5 ≈ 16.766

The actual percent body fat for this individual is 10%. Therefore, the residual can be calculated as:

Residual = Actual Percent Body Fat - Predicted Percent Body Fat

Residual = 10 - 16.766 ≈ -6.766

The residual associated with this point is approximately -6.766. This indicates that the actual percent body fat is about 6.766 units lower than the predicted value based on the regression equation.

To learn more about regression

https://brainly.com/question/28178214

#SPJ11

WX is perpendicular to XY, W is congruent to X, W is supplementary to X, WXYZ is a rhombus, and WX is parallel to YZ and this can be determined by using the properties of a square.

A quadrilateral is a polygon with four sides four angles and four vertices. Whenever we name a quadrilateral, we need to keep in mind the order of the vertices.

Given that, WXYZ is square.

The properties of a square are given below:

All sides are equal in length.

The two consecutive sides are perpendicular.

Opposite sides are parallel to each other.

All the interior angles are 90 degrees.

The diagonals bisect one another.

The area of the square whose sides are 'a' is .

The perimeter of the square whose sides are 'a' is 4a.

Diagonal are equal.

Therefore, the correct statements about the square WXYZ are A), B), C), D), and F).

Learn more about the quadrilaterals here:

https://brainly.com/question/29934440.

#SPJ7

Your answer for this question is B

The average rate of change of f(x) is less than average rate of change of g(x). Then the correct option is C.

A statement, principle, or policy that creates the link between two variables is known as a function. Functions are found all across mathematics and are required for the creation of complex relationships.

The function f(x) is given in the table, then the rate of change of the function f(x) will be

Rate of change of f(x) = (-2 + 4.5) / (-2 + 3)

Rate of change of f(x) = 2.5

If function g is a quadratic function that contains the points (-3,5) and (0,14).

Then the rate of change of the function g(x) will be

Rate of change of g(x) = (14 - 5) / (0 + 3)

Rate of change of g(x) = 9/3

Rate of change of g(x) = 3

Thus, the average rate of change of f(x) is less than average rate of change of g(x).

Then the correct option is C.

More about the function link is given below.

https://brainly.com/question/5245372

#SPJ5

Answer: the answer is A !!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Step-by-step explanation:

After paying off the mortgage, Frank will have accrued interest costs of $111,000 in total. $111,000 is the correct response.

The interest earned on savings that are computed using both the original principal and the interest accrued over time is known as compound interest. [tex]A = P(1 + r/n)^{nt[/tex], where P is the principal balance, r is the interest rate, n is the number of times interest is compounded annually, and t is the number of years, which is the formula for compound interest.

The total amount paid by Frank over 30 years will be the product of the monthly payment and the number of months in 30 years:

The total amount paid = Monthly payment × Number of months

Total amount paid = $700/month × 12 months/year × 30 years

Total amount paid = $252,000

However, this total amount includes both the principal (the original loan amount of $141,000) and the interest. To find the amount of interest paid, we need to subtract the principal from the total amount:

Interest paid = Total amount paid - Principal

Interest paid = $252,000 - $141,000

Interest paid = $111,000

Therefore, Frank will have paid $111,000 in interest once he has paid off the mortgage. The answer is A. $111,000.

Learn more about compound interest here:

https://brainly.com/question/29335425.

#SPJ5

Answer:

The answer is B

Step-by-step explanation:

Answer: its B i did the quiz lol

Step-by-step explanation:

Answer:

A. 60 + x = 90

Step-by-step explanation:

Complementary angles add up to 90 degrees so

60 + x = 90

Answer:

The answer is A: 60 + x = 90

Step-by-step explanation:

Complimentary angles are two angles that add up to 90, so the equation 60 + x = 90 is what you need to use to find the complimentary angle. I hope this helps :)

Answer:

2000 meters

Step-by-step explanation:

400×5=2000

Step-by-step explanation:

f(3)= -2*3^2 +3 -5

= -2*9 +3 -5

= 16

Answer:

x = 76°

Step-by-step explanation:

76° and x are alternative interior angles, so they are congruent when lines a and b are parallel

The monthly payment for a salary loan of 70,000 pesos at a 10% annual interest rate compounded monthly for 18 months is approximately 4,530.79 pesos.

To calculate the monthly payment for the salary loan, we can use the formula for the equal payment amount in an amortizing loan:

Payment = (Principal * Monthly Interest Rate) / (1 - (1 + Monthly Interest Rate)^(-n))

Where:

Principal = 70,000 pesos (loan amount)

Monthly Interest Rate = Annual Interest Rate / 12 = 10% / 12 = 0.0083333

n = number of payments (18 months)

Let's calculate the payment amount:

Payment = (70,000 * 0.0083333) / (1 - (1 + 0.0083333)^(-18))

Payment = 4,530.79 pesos

Therefore, the monthly payment for the salary loan is approximately 4,530.79 pesos.

To learn more about amortizing loan visit : https://brainly.com/question/17960115

#SPJ11

Answer:

hope this helpss

Step-by-step explanation:

Answer:

Step-by-step explanation:

if you have to simplify it then distribute -2

x²-2(x+5)=x²-2x-10

if problem is as mentioned by other answerer,then

[tex]\frac{d}{dx} (x^2-2(x+5))=-2\\x^2-2x-10= \int (-2dx)+c\\x^2-2x-10=-2x+c\\x^2=c+10\\x=\pm \sqrt{c+10}[/tex]

The matrix norm for an n x n real matrix B is  ||B||M = max{|Bij|}

First, we will prove that ||B||M ≤ max{|Bij|}. Let's assume k is the index that achieves the maximum value, i.e., max{|Bij|} = |Bkj|. Consider the vector x = (0, 0, ..., 0, 1, 0, ..., 0)T, where the 1 is in the k-th position. Then, ||x||2 = 1. Now, let's calculate ||Bx||M:

||Bx||M = sup{||Bx||2 : ||x||2 = 1}

= sup{√((Bx)T(Bx)) : ||x||2 = 1}

= sup{√(xTBTBx) : ||x||2 = 1}

= sup{√(xTBTBx) : ||x||2 = 1, xk = 1}

≤ √((BTB)kk) (using the fact that xTBTBx is a scalar and sup{scalar} = scalar)

= √(|Bkj|²)

= |Bkj|

= max{|Bij|}

Therefore, we have shown that ||B||M ≤ max{|Bij|}.

Now, let's prove the reverse inequality: max{|Bij|} ≤ ||B||M. Consider the vector x = (x1, x2, ..., xn)T, where xi = 1 for the index i that achieves the maximum absolute value of Bij, and xi = 0 for all other indices. Then, ||x||2 = 1. Now, let's calculate ||Bx||M:

||Bx||M = sup{||Bx||2 : ||x||2 = 1}

= sup{√((Bx)T(Bx)) : ||x||2 = 1}

= sup{√(xTBTBx) : ||x||2 = 1}

= sup{√(xTBTBx) : ||x||2 = 1, xi = 1 for some i}

≥ √((BTB)ii) (using the fact that xTBTBx is a scalar and sup{scalar} = scalar)

= sqrt(|Bij|²)

= |Bij|

= max{|Bij|}

Therefore, we have shown that max{|Bij|} ≤ ||B||M.

Combining both inequalities, we conclude that ||B||M = max{|Bij|}.

To know more about matrix click here :

https://brainly.com/question/31949428

#SPJ4

Answer:

It's 3[tex]x^{2}[/tex]/86

hope this helps:)

It is because the moon revolves around Earth.

Hope it helps you...

im not smart enough lol

Answer:

12

Step-by-step explanation:

put the numbers in least to greatest. so that would be 0,0,1,1,1,1,2,3,3,6,7,8, then find the one or two. in this case it is two. the medians in the one in the middle

Answer:

The minimize size that can be taken is - 31.28 or 31 .

Step-by-step explanation:

Lets calculate -

    Population standard deviation, [tex]\sigma=3.4 inches[/tex]

    Margin of error, E = 1

    Critical value , [tex]z_0_._0_5 =1.645[/tex]

Now , the size of the sample , [tex]n=(\frac{z\times \sigma}{E} )^2[/tex]

   Putting the given values ,

                    [tex]=(\frac{1.645\times 3.4}{1})^2[/tex]

                  = 31.28 or 31 .

The given table of the question has been attached here .

Hence , the answer is 31.

Answer:

90

Step-by-step explanation:

Answer:

90 degrees

Step-by-step explanation:

Step One: In order to solve this problem, you need to know that all angles in a triangle add up to 180 degrees.

Step Two: Now that we know that information, we need to add the angles we do know together: 34+56= 90 degrees.

Step Three: We subtract 90 from 180 to figure out the missing angles: 180-90= 90 degrees.