Answer:
See below
Explanation:
Direct materials :
$18
Direct labor :
1.9 hours × $18 labor costs
$34.2
Overhead
1.9 labor hours × ($1.50 fixed rate + $1.0 variable rate)
$4.75
Total unit cost
$18 + $34.2 + $4.75
$56.95
Cost to produce 640 chairs :
640 chairs × $56.95 per chair = $36,448
Cedric Company recently traded in an older model computer for a new model. The old model's book value was $140,000 (original cost of $370,000 less $230,000 in accumulated depreciation) and its fair value was $210,000. Cedric paid $65,000 to complete the exchange, which has commercial substance.
Calculate the following values:
1. Amount to debit for new equipment
2. Amount to debit accumulated depreciation
3. Amount to credit to cash
4. Amount to credit for old equipment
5. Gain or loss on sale
Answer:
1. $210,000
2.$230,000
3. $65,000
4. $370,000
5. $135,000 loss
Explanation:
1. Amount to debit for new equipment
Use the Fair Value of Asset given
2. Amount to debit accumulated depreciation
Use the accumulated depreciation of asset given up.
3. Amount to credit to cash
Use the Cash Paid up
4. Amount to credit for old equipment
Use the cost of asset given up
5. Gain or loss on sale
Gain or loss = Carrying Amount - Fair Value - Cash traded up
Exercise 23-2 Make or buy LO P1 Gelb Company currently manufactures 43,000 units per year of a key component for its manufacturing process. Variable costs are $5.15 per unit, fixed costs related to making this component are $73,000 per year, and allocated fixed costs are $78,500 per year. The allocated fixed costs are unavoidable whether the company makes or buys this component. The company is considering buying this component from a supplier for $3.70 per unit. Calculate the total incremental cost of making 43,000 units and buying 43,000 units. Should it continue to manufacture the component, or should it buy this component from the outside supplier
Answer:
If the company buys the units, it will save $135,350.
Explanation:
Giving the following information:
Number of units= 43,000
Make in-house:
Variable costs are $5.15 per unit
Avoidable fixed costs= $73,000
Buy:
Unitary cost= $3.7
We will take into account only the incremental cost, therefore, the unavoidable fixed costs will not be taken into account.
Total cost of production= 43,000*5.15 + 73,000= $294,450
Total cost of purchase= 3.7*43,000= $159,100
If the company buys the units, it will save $135,350.
The net income reported on the income statement of Whispering Winds Corp. for the current year was $1251000. Depreciation recorded on plant assets was $236000. Accounts receivable and inventories increased by $66000 and $44000, respectively. Prepaid expenses and accounts payable decreased by $6000 and $61000, respectively. How much cash was provided by operating activities during the year
Answer:
$1,454,000
Explanation:
Calculation to determine How much cash was provided by operating activities during the year
Using this formula
Operating activities=Net income+Depreciation+ Increased in Accounts receivable -Increased in inventories + Decreased in Prepaid expenses - Decreased in accounts payable
Let plug in the formula
Operating activities=$1251000 + $236000 -$66000 - $44000 +$6000 - $61000
Operating activities=$1,454,000
Therefore the amount of cash was provided by operating activities during the year is $1,454,000
The objectives of labor unions frequently shift with social and economic trends. In the 1970s, the primary objective was additional pay and benefits for members. In the 1980s, job security and union recognition were uppermost. In the 1990s and into the 2000s, unions again focused on job security due to the growth of global competition and outsourcing. Organized labor has also strongly opposed the increase in offshore outsourcing, claiming this practice will cost U.S. jobs. Labor unions generally insist that a contract contain a union security clause stipulating that employees who reap union benefits either officially join or at least pay dues to the union. Edward was recently transferred to a location in a new state. He was surprised that he was not required to be in the union in the new state, but he was in the old state. He later learned that the new state passed a provision giving him the choice.
a. Open shop agreement
b. Union shop agreement
c. Agency shop agreement & Right-to-work law
Answer:
The provision passed by the new state giving Edward the choice is called:
a. Open shop agreement.
Explanation:
The open shop agreement allows Edward but does not oblige him to be a union member before he can be hired in the new state. This means that the choice to belong to a union should be made by Edward and not his employer. It is not like a closed shop agreement, where Edward must be required to be a union member to be employed.
George is responsible for examining the heating and air conditioning system of an upcoming hotel. So, George is a mechanical____
Answer:
a mechanical inspector
Exercise 17-09 a-b (Video) (Part Level Submission) Oriole, Inc. manufactures two products: missile range instruments and space pressure gauges. During April, 50 range instruments and 200 pressure gauges were produced, and overhead costs of $88,010 were estimated. An analysis of estimated overhead costs reveals the following activities. Activities Cost Drivers Total Cost 1. Materials handling Number of requisitions $37,080 2. Machine setups Number of setups 28,710 3. Quality inspections Number of inspections 22,220 $88,010 The cost driver volume for each product was as follows. Cost Drivers Instruments Gauges Total Number of requisitions 390 640 1,030 Number of setups 200 295 495 Number of inspections 240 265 505 Collapse question part (a) Determine the overhead rate for each activity
Answer and Explanation:
The computation of the overhead rate for each activity is shown below
For machine handling
= $37,080 ÷ 1,030
= $36 per unit
For machine setups
= $28,710 ÷ 495
= $58 per unit
For Quality inspections
= $22,220 ÷ 505
= $44 per unit
In this way, the overhead rate for each activity would be determined
The same would be relevant
Penetration pricing doesn't work if ________.
Answer: the price isnt low enough
Explanation:Penetration pricing is a marketing strategy used by businesses to attract customers to a new product or service by offering a lower price during its initial offering. The lower price helps a new product or service penetrate the market and attract customers away from competitors.
. Bartholomew Corp's master budget calls for the production of 6,000 units of products monthly. The master budget includes indirect labor of $396,000 annually; Bartholomew considers indirect labor to be a variable cost. During the month of September, 5,600 units of product were produced, and indirect labor costs of $30,970 were incurred. A performance report utilizing flexible budgeting would report a flexible budget variance for indirect labor of:
Answer:
$170 Unfavorable
Explanation:
Budgeted monthly indirect labor = $396,000/12 = $33,000
Budgeted indirect labor per unit = $33,000/6,000 = $5.5 per unit
Flexible budgeted cost = 5,600*$5.5 = $30,800
Flexible budget variance = Actual cost - Flexible cost
Flexible budget variance = $30,970 - $30,800
Flexible budget variance = $170 Unfavorable
n 1982 the inflation rate hit 16%. Suppose that the average cost of a textbook in 1982 was $25. What was the expected cost in the year 2017 if we project this rate of inflation on the cost? (Assume continuous compounding. Round your answer to the nearest cent.) If the average cost of a textbook in 2012 was $150, what is the actual inflation rate (rounded to the nearest tenth percent)?
Answer:
Total number of years = 35
a. Expected cost in 2017 = $25 * e^(35*0.16)
Expected cost in 2017 = $25 * e^5.6
Expected cost in 2017 = $25 * 270.42
Expected cost in 2017 = $6,760.50
b. If the average cost of a textbook in 2012 was $150, then the actual inflation rate:
150 = 25 * e^(r*t)
150 = 25 * e^(r*30)
6 = e^(r*30)
Taking log base e on both side
30r = Ln6
30r = 1.7918
r = 1.7918/30
r = 0.05972667
r = 5.97%
So, actual inflation rate is 5.97%
Adamson Corporation is considering four average-risk projects with the following costs and rates of return:
Project Cost Expected Rate of Return
1 $2,000 16.00%
2 3,000 15.00
3 5,000 13.75
4 2,000 12.50
The company estimates that it can issue debt at a rate of rd = 10%, and its tax rate is 30%. It can issue preferred stock that pays a constant dividend of $5 per year at $48 per share. Also, its common stock currently sells for $33 per share; the next expected dividend, D1, is $4.00; and the dividend is expected to grow at a constant rate of 5% per year. The target capital structure consists of 75% common stock, 15% debt, and 10% preferred stock.
Required:
a. What is the cost of each of the capital components?
b. What is Adamson's WACC?
Answer:
a. Cost of debt = Interest * (1 - Tax rate)
= 10%*(1 - 0.30)
= 7%
Cost of preferred stock = Dividend/ Issue price
= 5/48
= 10.42%
Cost of common stock (Cost of retained earnings) = (D1/P0) + g
= (4/33) + 0.07
= 0.12 + 0.07
= 0.19
= 19%
b. Fund Cost Weight Cost * Weight
Debt 7% 0.15 1.05%
Preferred stock 10.42% 0.10 1.042%
Retained earnings 19% 0.75 14.25%
WACC 16.342%
The cash account for American Medical Co. at April 30 indicated a balance of $334,985. The bank statement indicated a balance of $388,600 on April 30. Comparing the bank statement and the accompanying canceled checks and memos with the records revealed the following reconciling items: A.Checks outstanding totaled $61,280. B.A deposit of $42,500, representing receipts of April 30, had been made too late to appear on the bank statement.
Answer:
Missing word "The bank collected $42,000 on a $40,000 note, including interest of $2,000. A check for $7,600 returned with the statement had been incorrectly recorded by American Medical Co. as $760. The check was for the payment of an obligation to Targhee Supply Co. for a purchase on account. A check drawn for $240 had been erroneously charged by the bank as $420. Bank service charges for April amounted to $145. Instructions: Prepare a bank reconciliation."
Bank reconciliation statement
Particulars Amount ($)
Balance as per bank statement 388,600
Add: Deposit in transit 42,500
Add: Error in recording the check (420-240) 180 431,280
Less: Outstanding checks (61,280)
Adjusted balance as per Bank statement 370,000
Bank reconciliation statement
Particulars Amount ($)
Balance as per books 334,985
Add: Note collected 40,000
Add: Interest collected 2,000 376,985
Less: Error in recording check (7,600-760) (6,840)
Less: Service charges levied (145)
Adjusted balance as per books 370,000
Modified Accelerated Cost Recovery System (MACRS) (LO 7.4) Mike purchases a new heavy-duty truck (5-year class recovery property) for his delivery service on April 30, 2017. No other assets were purchased during the year. The truck is not considered a passenger automobile for purposes of the listed property and luxury automobile limitations. The truck has a depreciable basis of $39,000 and an estimated useful life of 5 years. Assume half-year convention for tax. .
a. Calculate the amount of depreciation for 2017 using financial accounting straight-line depreciation (not the straight-line MACRS election) over the truck's estimated useful life.
b. Calculate the amount of depreciation for 2017 using the straight-line depreciation election, using MACRS tables over the minimum number of years with no bonus depreciation or election to expense
c.Calculate the amount of depreciation for 2017, including bonus depreciation but no election to expense, that Mike could deduct using the MACRS tables
d. Assume no income limit on the expense election. Calculate the amount of depreciation for 2017 including bonus depreciation and the election to expense that Mike can deduct.
Answer: See explanation
Explanation:
a. The amount of depreciation for 2017 using financial accounting straight-line depreciation will be:
= $39000 × 8months/5 years
= $39000 × 8months / 60months
= $39000 × 8/60
= $5200
b. The amount of depreciation for 2017 using the straight-line depreciation election will be:
= $39000 × 10%
= $39000 × 0.1
= $3900
c. The amount of depreciation for 2017, including bonus depreciation but no election to expense, that Mike could deduct using the MACRS tables will be:
= ($39000/2) + $3900
= $19500 + $3900
= $23400
d. If there is no income limit on the expense election, the amount of depreciation for 2017 including bonus depreciation and the election to expense that Mike can deduct will be:
= $25000 + $7000 + $1400
= $33400
The following income statements are provided for Li Company's last two years of operation: Year 1 Year 2 Number of units produced and sold 4,500 4,100 Sales revenue $ 69,750 $ 63,550 Cost of goods sold 41,700 38,000 Gross margin 28,050 25,550 General, selling, and administrative expenses 17,500 16,300 Net income $ 10,550 $ 9,250 Assuming that cost behavior did not change over the two-year period, what is Li Company's contribution margin in Year 2?
Answer:
$13,325
Explanation:
Calculation to determine Li Company's contribution margin in Year 2
First step is to calculate the Variable cost per unit
Using this formula
Variable cost per unit = Change in costs ÷ Change in activity Cost of goods sold
Let plug in the formula
Variable cost per unit = (41,700 − 38,000) ÷ (4,500 units − 4,100 units)
Variable cost per unit =3,700/400
Variable cost per unit = $9.25 per unit
Second step is to calculate the Selling and administrative expense
Variable cost per unit = (17,500- 16,300) ÷ (4,500 units − 4,100 units)
Variable cost per unit =1,200/400 units
Variable cost per unit = $3.00 per unit
Now let calculate the Contribution margin in Year 2
Using this formula
Contribution margin = Sales revenue − Variable costs
Let plug in the formula
Contribution margin= $ 63,550 − [4,100 units × ($9.25 per unit + $3.00 per unit)]
Contribution margin=$ 63,550-(4,100 units×$12.25)
Contribution margin=$ 63,550-$50,225
Contribution margin = $13,325
Therefore Li Company's contribution margin in Year 2 is $13,325
Is gender pay gap logical ? If so, kindly explain.
Thanks.
Answer:
yes (logically but in my opinion no)
Explanation:
The reason why is because some jobs required you to lift heavy stuff and some women can't lift very heavy things.
Danner Company expects to have a cash balance of $52,965 on January 1, 2017. Relevant monthly budget data for the first 2 months of 2017 are as follows. Collections from customers: January $100,045, February $176,550. Payments for direct materials: January $58,850, February $88,275. Direct labor: January $35,310, February $52,965. Wages are paid in the month they are incurred. Manufacturing overhead: January $24,717, February $29,425. These costs include depreciation of $1,765 per month. All other overhead costs are paid as incurred. Selling and administrative expenses: January $17,655, February $23,540. These costs are exclusive of depreciation. They are paid as incurred. Sales of marketable securities in January are expected to realize $14,124 in cash. Danner Company has a line of credit at a local bank that enables it to borrow up to $29,425. The company wants to maintain a minimum monthly cash balance of $23,540.
Prepare a cash budget for January and February.
Answer:
Danner Company
Cash Budget for January and February
January February
Beginning balance $52,965 $32,367
Collections from customers 100,045 176,550
Sales of marketable securities 14,124
Cash available $167,134 $208,917
Payments:
Direct materials $58,850 $88,275
Direct labor 35,310 52,965
Manufacturing overhead 22,952 27,660
Selling & administrative expenses 17,655 23,540
Total payments $134,767 $192,440
Cash balance $32,367 $16,477
Required minimum balance 23,540 23,540
Excess (Needed) Financing $8,827 ($7,063)
Explanation:
a) Data and Calculations:
Expected January 1, 2017 Cash Balance = $52,965
January February
Collections from customers $100,045 $176,550
Sales of marketable securities 14,124
Payments:
Direct materials $58,850 $88,275
Direct labor 35,310 52,965
Manufacturing overhead 22,952 27,660
Selling & administrative expenses 17,655 23,540
Line of credit limit = $29,425
Required minimum cash balance = $23,540
The stockholders’ equity section of Velcro World is presented here.
VELCRO WORLD
Balance Sheet (partial)
($ and shares in thousands)
Stockholders' equity:
Preferred stock, $1 par value $ 5,800
Common stock, $1 par value 28,000
Additional paid-in capital 1,028,600
Total paid-in capital 1,062,400
Retained earnings 286,000
Treasury stock, 12,000
Common shares (360,000)
Total stockholders' equity $ 988,400
Based on the stockholders' equity section of Velcro World, answer the following questions. Remember that all amounts are presented in thousands.
1. How many shares of preferred stock have been issued? (Enter you answer in total number of shares, not in thousands.)
2. How many shares of common stock have been issued? (Enter you answer in total number of shares, not in thousands.)
3. If the common shares were issued at $30 per share, at what average price per share were the preferred shares issued?
4. If retained earnings at the beginning of the period was $250 million and $30 million was paid in dividends during the year, what was the net income for the year? (Enter your answer in million (i.e., 5,000,000 should be entered as 5).)
5. What was the average cost per share of the treasury stock acquired?
Answer:
Velcro World
1. Prefered stock issued = 5,800,000
2. Common stock issued = 28,000,000
3. Average price of preferred stock = $38
4. Net income for the year = $66
5. Average cost per share of the treasury stock acquired = $30
Explanation:
a) Data and Calculations:
VELCRO WORLD
Balance Sheet (partial)
($ and shares in thousands)
Stockholders' equity:
Preferred stock, $1 par value $ 5,800
Common stock, $1 par value 28,000
Additional paid-in capital 1,028,600
Total paid-in capital 1,062,400
Retained earnings 286,000
Treasury stock, 12,000 (360,000)
Total stockholders' equity $ 988,400
1. Prefered stock issued = 5,800,000
2. Common stock issued = 28,000,000
3. Additional paid in capital = 1,028,600,000
less common stock (part) 812,000,000 ($29 * 28,000,000)
Preferred stock (part) 216,600,000
add Preferred stock 5,800,000
Total preferred stock value 222,400,000
Average price = 222,400,000/5,800,000 = $38
4. Retained earnings at the end = $286,000,000
add dividends paid during the year 30,000,000
Retained earnings at the beginning = $250,000,000
Net income for the year = $66,000,000
$66
5. Average cost per share of the treasury stock acquired = $360,000,000/12,000,000 = $30
Sound Tek Inc. manufactures electronic stereo equipment. The manufacturing process includes printed circuit (PC) board assembly, final assembly, testing, and shipping. In the PC board assembly operation, a number of individuals are responsible for assembling electronic components into printed circuit boards. Each operator is responsible for soldering components according to a given set of instructions. Operators work on batches of 50 printed circuit boards. Each board requires 4 minutes of board assembly time. After each batch is completed, the operator moves the assembled boards to the final assembly area. This move takes 12 minutes to complete. The final assembly for each stereo unit requires 20 minutes and is also done in batches of 50 units. A batch of 50 stereos is moved into the test building, which is across the street. The move takes 20 minutes. Before conducting the test, the test equipment must be set up for the particular stereo model. The test setup requires 30 minutes. The units wait while the setup is performed. In the final test, the 50-unit batch is tested one at a time. Each test requires 9 minutes. The completed batch, after all testing, is sent to shipping for packaging and final shipment to customers. A complete batch of 50 units is sent from testing to shipping. The Shipping Department is located next to testing. Thus, there is no move time between these two operations. Packaging and labeling requires 12 minutes per unit.
Required:
Determine the amount of value-added and non-value-added lead time and the value-added ratio in this process for an average stereo unit in a batch of 45 units.
Answer:
A. 45
B.2,235
C. 1.9%
Explanation:
A. Calculation to determine the amount of value-added
VALUE ADDED TIME
PC board Assembly 4
Final Assembly 20
Testing 9
Packaging and labeling 12
Total Value added time 45
Therefore the amount of value-added is 45
B. Calculation to determine non-value-added lead time
NON-VALUE-ADDED LEAD TIME
Wait time for non added value 2,205
[45*(50-1)]
Add Test set up time 30
Wait time 2,235
Therefore The non-value-added lead time is 2,235
C. Calculation to determine the value-added ratio
Value added time 45
Non value added lead time:
Wait time lead time 2,235
Move time lead time 32
(12+20)
Total lead time 2,312
Value added ratio 1.9%
(45/2312*100)
Therefore the value-added ratio is 1.9%
Gelb Company currently manufactures 47,000 units per year of a key component for its manufacturing process. Variable costs are $6.25 per unit, fixed costs related to making this component are $85,000 per year, and allocated fixed costs are $84,500 per year. The allocated fixed costs are unavoidable whether the company makes or buys this component. The company is considering buying this component from a supplier for $3.70 per unit. Calculate the total incremental cost of making 47,000 units and buying 47,000 units. Should it continue to manufacture the component, or should it buy this component from the outside supplier
Answer:
Gelb Company
1. The total incremental cost of making and buying 47,000 units is:
= $204,850.
2. Gelb should buy this component from the outside supplier. It is far cost-effective.
Explanation:
a) Data and Calculations:
Required quantity of key component per year = 47,000 units
Variable costs per unit = $6.25
Avoidable fixed costs per year = $85,000
Unavoidable fixed costs per year = $84,500
Purchase price of component from outside supplier = $3.70 per unit
Incremental cost of making or buying the 47,000 units:
Make Buy Incremental Costs
Variable costs $293,750 $173,900 $119,850
Avoidable fixed costs 85,000 0 85,000
Total relevant costs $378,750 $173,900 $204,850
Elaine needs $1,500 to buy textbooks and other school supplies. Kramer agrees to loan Elaine $1,500, accepting as collateral Elaine’s car. They put their agreement in writing and sign it. Elaine keeps possession of the car. What are the requirements for Kramer to have an enforceable security interest in the car? What must Kramer do to let other creditors know of his security interest in the car?
Answer:
1. For Kramer to have an enforceable security interest in the car, the following requirements must be met:
a. Elaine must possess the property right over the car.
b. Kramer must give value for the security interest.
c. Elaine must have authenticated the security agreement by describing it, or Kramer must be in possession of the collateral.
2. Kramer needs to perfect his security interest in the car by registering it with the appropriate statutory body.
Explanation:
Under UCC Article 9, four steps must be taken by Kramer to perfect the security interest in the collateral car. They include:
a. Creating and filing a financing statement with the statutory body
b. Establishing actual possession of the car
c. Establishing control over the car by not allowing Elaine keep its possession.
d. Attaching a purchase financial security interest on the car.
Teal Mountain Inc. issues $5.0 million, 10-year, 8% bonds at 101, with interest payable on January 1. The straight-line method is used to amortize bond premium. (a)Prepare the journal entry to record interest expense and bond premium amortization on December 31, 2022, assuming no previous accrual of interest. (Credit account titles are automatically indented when amount is entered. Do not indent manually.)
Answer:
Dec. 31
Dr Interest expense $405,000
Cr Discount on bonds payable $5,000
Cr Cash $400,000
Explanation:
Preparation of the journal entry to record interest expense and bond premium amortization on December 31, 2022
Dec. 31
Dr Interest expense $405,000
($400,000+$5,000)
Cr Discount on bonds payable $5,000
[$5,000,000 - ($5,000,000 x 101/100)/10]
Cr Cash ($5,000,000 x 8%) $400,000
(To record interest expense and bond premium amortization)
Communication starts with
sender
is answer..
........
A major equipment purchase is being considered Metro Atlanta. The initial cost is determined to be $1,000,000. It is estimated that this new equipment will save $100,000 the first year and increase gradually by $50,000 for the next 6 years. MARR= 10%.
A) The payback period for this equipment purchase is______
B) The B/C ratio for this investment is ________
C) The NFW of this investment is ________
Task 1 . The income (in thousand $) of 5 small companies labeled AA , BB , CC , DD , EE has been calculated and the results are as follo,;vs:
2.49j 2.39j 2.39, 1.79, 3.8 .
1. Put the obtained data as points on the following coordinate system.
Income value
3
2
1
AA BB CC DD EE Company
2. Calculate the mean value from the sample for these data:
On the chart draw a line y = x (a horizontal line at the level of the mean of the sample) and for every measurement mark the difference between the value of the measurement and the sample mean.
3. Calculate the samples variance, standard deviation and the estimator of variance:
Icr2 =_.!_ f=_(xi -
I• I
__ n i=l
x_) _= iT
4. Write proper values into the following tagged fields and interpret the results obtained:
CJ CJ
x - 20- x - a x+ a x+ 20-
Date of simulation : 2021 03 02 20:30:20.050 Seed: 20302 8071 .
8
Answer:
yggjuytygyvcfryttgggv
Explanation:
Sparkle Metallurgy, Inc. has two service departments (Human Resources and Building Maintenance) and two production departments (Machining and Assembly). The company allocates Building Maintenance cost on the basis of square footage and Human Resources cost on the basis of employees. It believes that Building Maintenance provides more service than Human Resources. The square footage and employees in each department follow. Square Footage Employees Human Resources 4,000 10 Building Maintenance 10,000 15 Machining 15,000 40 Assembly 21,000 60 Assuming use of the step-down method, which of the following choices correctly denotes the number of square feet and employees over which the Building Maintenance cost and Human Resources cost would be allocated (i.e., spread)?
a. 19,000.
b. 44,000.
c. 50,000.
d. 63,000.
Answer:
B.40,000 square feet
Explanation:
Calculation to correctly denotes the number of square feet and employees over which the Building Maintenance cost and Human Resources cost would be allocated
Employees Human Resources 4,000
Machining 15,000
Assembly 21,000
Number of square feet 40,000
(4,000+15,000+21,000)
Therefore the number of square feet and employees over which the Building Maintenance cost and Human Resources cost would be allocated is 40,000
The Laramie Factory produces expensive boots. It has two departments, tanning and finishing departments, that process all the items. During January, the beginning work in process in the tanning department was 40% complete as to conversion and 100% complete as to direct materials. The beginning inventory included $6,000 for materials and $18,000 for conversion costs. Ending work-in-process inventory in the tanning department was 40% complete. Direct materials are added at the beginning of the process. Beginning work in process in the finishing department was 60% complete as to conversion. Beginning inventories included $7,000 for transferred-in costs and $11,000 for conversion costs. Ending inventory was 30% complete. Additional information about the two departments follows: Tanning Finishing Beginning work-in-process units 5,000 4,000 Units started this period 14,000 Units transferred out this period 16,000 18,000 Ending work-in-process units 2,000 Material costs added $18,000 Conversion costs $32,000 $18,630 Transferred-out cost $50,400 Required: Complete the production cost worksheet below using FIFO costing for the finishing department.
Answer:
The Laramie Factory
Cost Worksheet for the Finishing Department, using FIFO Costing
Finishing Department
Cost assigned to: Materials Conversion Total
Units transferred out $45,360 $18,000 $63,360
Ending work in process 5,040 600 5,640
Total cost accounted for $50,400 $18,600 $69,000
Explanation:
a) Data and Calculations:
Materials Conversion
Tanning Finishing Tanning Finishing
Beginning work in process 100% 100% 40% 60%
Cost of beginning WIP $6,000 $7,000 $18,000 $11,000
Ending work in process 100% 100% 40% 30%
Additional information:
Tanning Finishing
Beginning work-in-process units 5,000 4,000
Units started this period 14,000 16,000
Units transferred out this period 16,000 18,000
Ending work-in-process units 3,000 2,000
Materials Conversion
Tanning Finishing Tanning Finishing
Beginning work in process 100% 100% 40% 60%
Beginning work in process done this period 60% 40%
Ending work in process 100% 100% 40% 30%
Cost of beginning WIP $6,000 $7,000 $18,000 $11,000
Costs added 18,000 $54,255 32,000 18,630
Total costs of production $24,000 $61,255 $50,000 $29,630
Transferred-out cost $50,400
Equivalent units
Materials Conversion
Tanning Finishing Tanning Finishing
Beginning work-in-process units 0 0 3,000 1,600
Units started and completed 16,000 18,000 13,000 16,400
Ending work-in-process units 3,000 2,000 1,200 600
Equivalent units of production 19,000 20,000 17,200 18,600
Cost per equivalent units Materials Conversion
Tanning Finishing Tanning Finishing
Costs added/transferred in $18,000 $50,400 $32,000 $18,630
Equivalent units of production 19,000 20,000 17,200 18,600
Cost per equivalent unit $0.95 $2.52 $1.86 $1.00
Tanning Department
Cost assigned to: Materials Conversion Total
Units transferred out $15,200 $29,760 $44,960
Ending work in process 2,850 2,232 5,082
Total costs $18,050 $31,992 $50,042
Finishing Department
Cost assigned to: Materials Conversion Total
Units transferred out $45,360 $18,000 $63,360
Ending work in process 5,040 600 5,640
Total cost accounted for $50,400 $18,600 $69,000
Explanation:
50,400
18,600
69,000
BRAINILIEST PLEASEXYZ Office Supplies is about to introduce a new customer service program that will affect all its 355 sales and service employees. Job duties will be changed, and the employee rewards system will be altered to fit this new customer focus. Moreover, the company wants to improve the efficiency of work processes, thereby removing some of the comfortable (and often leisurely) routines that employees have followed over the years. Top management is concerned about the different types of forces resisting change that the company will potentially experience during this change process. The employees at XYZ discreetly weaken the new customer service program to prove that the decision is wrong and that the new program is not effective. Which of the following reasons to resist change is depicted in this scenario?
a. induce organizational learning.
b. negotiate with the employees.
c. use the stress management technique.
d. create an urgency for change.
Answer: d. Create an urgency for change.
Explanation:
Based on the information given, the reason to resist change that is depicted in this scenario is creating an urgency for change.
The urgency for change can be seen in situations such as the shifting of the reward system towards the new customers, getting employees closer to the customers and also by making job roles to be more focused towards customer.
Therefore, the correct option is D.
g Comfi Airways, Inc., a small two-plane passenger airline, has asked for your assistance in some basic analysis of its operations. Both planes seat 10 passengers each, and they fly commuters from Comfi’s base airport to the major city in the state, Metropolis. Each month, 40 round-trip flights are made. Shown below is a recent month’s activity in the form of a cost-volume-profit income statement. Fare revenues (400 passenger flights) $48,000 Variable costs Fuel $16,960 Snacks and drinks 720 Landing fees 2,100 Supplies and forms 1,100 20,880 Contribution margin 27,120 Fixed costs Depreciation 3,100 Salaries 11,600 Advertising 600 Airport hanger fees 1,650 16,950 Net income $10,170 Calculate the break-even point in dollars. Break-even point $Type your answer here eTextbook and MediaAssistance Used Calculate the break-even point in number of passenger flights. Break-even point Type your answer here flights eTextbook and MediaAssistance Used Without calculations, determine the contribution margin at the break-even point. Break-even point $Type your answer here eTextbook and MediaAssistance Used If ticket prices were decreased by 10%, passenger flights would increase by 25%. However, total variable costs would increase by the same percentage as passenger flights. (1) How much would net income be impacted by this change? Net income to $ (2) Should the ticket price decrease be adopted?
Answer:
Comfi Airways, Inc.
a. Break-even point in sales dollars = $30,000
b. Break-even point in passenger flights = 250
c. Contribution at break-even point = fixed costs = $16,950
d. Net income will increase to $10,950 (an increase of $780).
e. Yes. The ticket price decrease should be adopted.
Explanation:
a) Data and Calculations:
Number of airplanes = 2
Maximum number of passengers per flight = 10
Number of round-trip flights each month = 40
Number of passenger flights = 400 (40 * 10)
Total Unit
Fare revenues $48,000 $120 ($48,000/400)
Variable costs:
Fuel $16,960
Snacks and drinks 720
Landing fees 2,100
Supplies and forms 1,100 20,880 $52.20 ($20,880/400)
Contribution margin 27,120 $67.80 ($27,120/400)
Fixed costs:
Depreciation 3,100
Salaries 11,600
Advertising 600
Airport hanger fees 1,650 $16,950
Net income $10,170
Contribution margin ratio = $67.80/$120 = 0.565
Break-even point in sales dollars = Fixed costs/Contribution margin ratio
= $16,950/0.565
= $30,000
Break-even point in sales units = Fixed costs/Contribution per unit
= $16,950/$67.80
= 250 passenger flights
Contribution at break-even point = Fixed costs = $16,950
Decrease of ticket prices by 10% from $120 to $108 ($120 * 90%)
Passenger flights increased to 500 (400 * 1.25)
Fare revenues = $54,000 (500 * $108)
Total variable costs increased to $26,100 ($20,880 * 1.25)
Contribution = $27,900
Fixed costs = $16,950
Net income = $10,950
Increase in net income = $780 ($10,950 - $10,170)
The Northern Ring Company manufactures 2,000 telephones per year. The full manufacturing costs per telephone are as follows: Direct materials $ 2 Direct labor 8 Variable manufacturing overhead 6 Average fixed manufacturing overhead 6 Total $22 The Texas Ring Company has offered to sell Northern Ring Company 2,000 telephones for $15 per unit. If Northern Ring Company accepts the offer, $10,000 of fixed overhead will be eliminated. Northern Ring should: Select one: A. Buy the telephones; the savings is $12,000 B. Make the telephones; the savings is $2,000 C. Buy the telephones; the savings is $24,000 D. Make the telephones; the savings is $12,000
Answer:
A. Buy the telephones; the savings is $12,000
Explanation:
The computation is shown below;
Particulars Without offer with offer
Direct material $4,000 $0
(2,000 × $2)
Direct labor $16,000 $0
(2,000 × $8)
Variable manufacturing overhead $12,000 $0
(2,000 × $6)
Fixed manufacturing overhead $12,000 $2,000
($12,000 - $10,000)
Purchase cost $30,000
($2,000 × $15)
Total cost $44,000 $32,000
Therefore the option A is correct
Walmart and Target are the only stores in a remote town that currently stock and sell the PlayStation 5 video game console. Managers at both stores are simultaneously deciding whether to charge a price of $1,000 or $1,500 for each console. If both stores charge $1,000, they earn a profit of $100,000 each. If both stores charge $1,500, they earn a profit of $200,000 each. If one store charges $1,000 and the other store charges $1,500, the store that charges $1,000 earns a profit of $250,000 and the firm that charges $1,500 earns a profit of $50,000. If Walmart and Target ________, they can both charge $1,500 and earn the highest combined profit available.
Answer:
collude with each other
Explanation:
A monopoly market structure is the structure in which the chances of high profit are there. In the case when the two firms and they work together so that the can extract the maximum profits and after that they shared themselves
As in the given question, in the case when Walmart and Target collude with each other so they would charge $1.500 and earned highest profit available
The same would be considered
LJM Corporation includes two divisions, Shay Division and Patty Division. The Shay Division makes specialized filters, including one that could be used by the Patty Division. Costs for the filter are variable costs, $16; fixed costs, $20. Shay Division has capacity to make 20,000 of the filters, and it is operating at capacity. It sells the filters to other companies for $52 each. The Patty Division needs 8,000 filters per year, and it has been purchasing them from another company for $45 each. Required: 1) If a transfer were to occur between Shay Division and Patty Division, what is the maximum that Patty Division should be willing to pay for the filters? 2) If a transfer were to occur between Shay Division and Patty Division, what is the minimum price that Shay Division should be willing to accept?
Answer:
LJM Corporation
1. The Maximum price that Patty Division should be willing to pay for the filters is: $45.
2. Minimum price that Shay Division should be willing to accept is: $52.
Explanation:
a) Data and Calculations:
Shay Division Patty Division
Costs:
Variable costs $16
Fixed costs 20
Sales/purchase price 52 $45
Capacity/requirement 20,000 8,000
Maximum price that Patty Division should be willing to pay for the filters is: $45.
Minimum price that Shay Division should be willing to accept is: $52.
b) The minimum transfer price should be determined based on the variable costs and the opportunity costs. The opportunity cost for Shay Division is $36 ($52 - $16). For Patty Division, the maximum price it should be willing to pay is the opportunity cost, which is the price Patty pays when it buys the filters from the market.