(a) The galvanic cell has a cathode half-reaction of NO₃⁻(aq) + 4H⁺(aq) + 3e⁻ → NO(g) + 2H₂O(l)
(b) An anode half-reaction is 3Cu⁺(aq) → 3Cu₂⁺(aq) + 3e⁻
(c) A cell voltage under standard conditions is +0.44 V.
What is balanced equation for the cathode half-reaction?The half-reaction that takes place at the cathode is:
NO₃⁻(aq) + 4H⁺(aq) + 3e⁻ → NO(g) + 2H₂O(l)
What is balanced equation for an anode half-reaction?The half-reaction that takes place at the anode is:
3Cu⁺(aq) → 3Cu₂⁺(aq) + 3e⁻
How to calculate cell voltage?To calculate the cell voltage under standard conditions, we can use the standard reduction potentials for each half-reaction. The standard reduction potential for the half-reaction at the cathode is +0.96 V, and the standard reduction potential for the half-reaction at the anode is +0.52 V.
The cell voltage is calculated by subtracting the anode potential from the cathode potential:
E°cell = E°cathode - E°anode
E°cell = (+0.96 V) - (+0.52 V)
E°cell = +0.44 V
Therefore, the cell voltage under standard conditions is +0.44 V.
Learn more about Half-reaction
brainly.com/question/10668307
#SPJ11
The following reaction has H° = 250.1 kJ/mol and AS = 333.3 J/mol K. CH4 (g) + H2O(g) -> CO(g) + 3H2(g) a. Is the reaction exothermic or endothermic? b. Is the reaction spontaneous or nonspontaneous at room temperature (298 K)? c. Is Keq for the reaction <1, 1, or >1?
The reaction, CH4 (g) + H2O(g) -> CO(g) + 3H2(g), is: (a)endothermic (b) nonspontaneous (c) Keq is <1
CH4 (g) + H2O(g) -> CO(g) + 3H2(g)
a. The reaction is endothermic because H° is positive (250.1 kJ/mol).
b. To determine whether the reaction is spontaneous or nonspontaneous at room temperature (298 K), we need to calculate the change in free energy (ΔG) using the equation ΔG = ΔH - TΔS, where T is the temperature in Kelvin.
ΔG = 250.1 kJ/mol - (298 K)(333.3 J/mol K/1000 J/kJ) = 250.1 kJ/mol - 99.4 kJ/mol = 150.7 kJ/mol
Since ΔG is positive, the reaction is nonspontaneous at room temperature (298 K).
c. To determine whether Keq for the reaction is <1, 1, or >1, we can use the equation ΔG° = -RTln(Keq), where R is the gas constant (8.314 J/mol K) and ΔG° is the standard free energy change.
ΔG° = -RTln(Keq) Substituting the given values, we get: 250.1 kJ/mol = -(8.314 J/mol K)(298 K)ln(Keq)
Solving for Keq, we get Keq = e^(-250.1 kJ/mol / (8.314 J/mol K * 298 K)) = 1.09 x 10^-19
Since Keq is much less than 1, we can conclude that the reaction strongly favors the reactants and only a very small amount of product will be formed at equilibrium.
To know more about how endothermic reactions and keq are related visit: https://brainly.com/question/8574076
#SPJ11
The oxidation of nitrogen monoxide is favored at 457 K: 2 NO(g) + O_2 (g) 2 NO_2(g) K_p 1.3 times 10^4 Calculate K_c at 457 K. K_c = _____ time 10^_____ (Enter your answer in scientific notation.)
K_c = 4.02 times [tex]10^{22}[/tex].
To calculate K_c from K_p, we use the formula: K_p = K_c[tex]RT^{Δn}[/tex], Where R is the gas constant (0.0821 L atm/mol K), T is the temperature in Kelvin (457 K), and Δn is the change in the number of moles of gas (2 - 3 = -1).
First, we need to convert K_p to K_c by solving for K_c:
K_p = 1.3 x [tex]10^{4}[/tex]
K_c = K_p / [tex]RT^{Δn}[/tex]
K_c = 1.3 x [tex]10^{4}[/tex] / [tex][(0.0821)(457)]^{-1}[/tex]
K_c = 4.02 x [tex]10^22}[/tex]
Therefore, K_c = 4.02 times [tex]10^22}[/tex].
To know more about Kelvin, refer here:
https://brainly.com/question/30898098#
#SPJ11
K_c = 4.02 times [tex]10^{22}[/tex].
To calculate K_c from K_p, we use the formula: K_p = K_c[tex]RT^{Δn}[/tex], Where R is the gas constant (0.0821 L atm/mol K), T is the temperature in Kelvin (457 K), and Δn is the change in the number of moles of gas (2 - 3 = -1).
First, we need to convert K_p to K_c by solving for K_c:
K_p = 1.3 x [tex]10^{4}[/tex]
K_c = K_p / [tex]RT^{Δn}[/tex]
K_c = 1.3 x [tex]10^{4}[/tex] / [tex][(0.0821)(457)]^{-1}[/tex]
K_c = 4.02 x [tex]10^22}[/tex]
Therefore, K_c = 4.02 times [tex]10^22}[/tex].
To know more about Kelvin, refer here:
https://brainly.com/question/30898098#
#SPJ11
Consider a buffer solution that is 0.50 M in NH3 and 0.20 M in NH4Cl. For ammonia, pKb = 4.75.
Calculate the pH of 1.0 L of the original buffer upon addition of 0.010 mol of solid NaOH to the original buffer solution.
Calculate the pH of 1.0 L of the original buffer upon addition of 30.0 mL of 1.0 M HCl to the original buffer solution.
A) The pH of the buffer solution after addition of NaOH is:
9.66 B) The pH of 1.0 Lf the original buffer upon addition of 30.0 mL of 1.0 M HCl is 8.53.
For the given buffer solution, the dissociation reaction of NH3 in water can be written as:
NH3 + H2O ⇌ NH4+ + OH-
The equilibrium constant for this reaction is:
Kb = [NH4+][OH-]/[NH3]
And the relation between Kb and pKb is:
pKb = 14 - pKb
Therefore, pKb = 14 - 4.75 = 9.25
Upon addition of 0.010 mol of solid NaOH to the original buffer solution:
The NaOH will react with NH4+ in the buffer to form NH3 and water:
NaOH + NH4+ → NH3 + H2O + Na+
The moles of NH4+ in 1.0 L of the buffer solution can be calculated as:
moles of NH4+ = 0.20 mol/L x 1.0 L = 0.20 mol
Since the amount of NaOH added is much less than the amount of NH4+ in the buffer, we can assume that all the NH4+ will be consumed and converted to NH3.
The new concentration of NH3 can be calculated as:
moles of NH3 = moles of NH4+ = 0.20 mol
new volume of the solution = 1.0 L
new concentration of NH3 = moles of NH3/new volume of the solution = 0.20 M
The concentration of OH- can be calculated from the reaction:
NH4+ + OH- → NH3 + H2O
Kb = [NH4+][OH-]/[NH3]
Since the concentration of NH3 is much larger than that of NH4+ and OH-, we can assume that the concentration of NH3 has not changed significantly, and therefore:
Kb = [NH4+][OH-]/[NH3] ≈ [NH4+][OH-]/[NH3]0
where [NH3]0 is the initial concentration of NH3 in the buffer solution.
Rearranging the equation gives:
[OH-] = Kb[NH3]/[NH4+]
[OH-] = 1.8 x 10^-5 x 0.50/0.20 = 4.5 x 10^-5 M
The concentration of H+ can be calculated from the equation:
Kw = [H+][OH-]
where Kw is the ion product constant of water, Kw = 1.0 x 10^-14 at 25°C.
[H+] = Kw/[OH-] = 1.0 x 10^-14/4.5 x 10^-5 = 2.2 x 10^-10 M
Therefore, the pH of the buffer solution after addition of NaOH is:
pH = -log[H+] = -log(2.2 x 10^-10) ≈ 9.66 For the addition of 0.010 mol of solid NaOH:
The balanced chemical equation for the reaction between NaOH and NH4Cl is:
NaOH + NH4Cl → NaCl + NH3 + H2O
Since NH3 is a weak base, it reacts with the strong base NaOH to form the conjugate base NH2- and water. The NH2- reacts with H+ from the NH4+ ion to form NH3 again. Therefore, the buffer capacity will neutralize the added OH- ions.
The initial amount of NH3 in 1.0 L of the buffer solution is:
0.50 M NH3 x 1.0 L = 0.50 mol NH3
Since NH4Cl is a salt of a weak base (NH3) and a strong acid (HCl), it completely dissociates in water to form NH4+ and Cl- ions. Therefore, the initial amount of NH4+ in 1.0 L of the buffer solution is:
0.20 M NH4Cl x 1.0 L = 0.20 mol NH4+
When 0.010 mol of NaOH is added, it reacts completely with NH4+ to form NH3 and water, according to the balanced equation above. Therefore, the final amount of NH4+ in 1.0 L of the buffer solution is:
0.20 mol NH4+ - 0.010 mol NaOH = 0.190 mol NH4+
Since NH3 is a weak base, it reacts with the remaining H+ ions to form NH4+ ions. Therefore, the final amount of NH3 in 1.0 L of the buffer solution is:
0.50 mol NH3 + 0.010 mol NaOH = 0.510 mol NH3
The concentration of NH3 in the final solution is:
0.510 mol NH3 / 1.0 L = 0.510 M NH3
The concentration of NH4+ in the final solution is:
0.190 mol NH4+ / 1.0 L = 0.190 M NH4+
To calculate the pH of the final solution, we need to calculate the concentration of OH- ions:
Kb = Kw / Ka
Kw = 1.0 x 10^-14 at 25°C
Ka = 10^-pKa = 10^-4.75
Kb = 1.0 x 10^-14 / 10^-4.75 = 1.77 x 10^-10
NH3 + H2O ⇌ NH4+ + OH-
Initial concentration: 0.510 M NH3 and 0.190 M NH4+
Change: -x M for NH3 and +x M for NH4+
Equilibrium concentration: (0.510 - x) M NH3 and (0.190 + x) M NH4+
Kb = [NH4+][OH-] / [NH3]
1.77 x 10^-10 = (0.190 + x)(x) / (0.510 - x)
Since x is much smaller than 0.510, we can assume that 0.510 - x ≈ 0.510
1.77 x 10^-10 = (0.190 + x)(x) / 0.510
x = 3.38 x 10^-6
[OH-] = 3.38 x 10^-6 M
pOH = -log([OH-]) = 5.47
pH = 14.00 - pOH = 8.53
Click the below link, to learn more about Buffer solution:
https://brainly.com/question/10643807
#SPJ11
define the terms: oxidation, reduction, standard reduction potential, anode, and cathode.
Oxidation is a chemical reaction that involves the loss of electrons by a substance. Reduction is a chemical reaction that involves the gain of electrons by a substance. The anode is the electrode where oxidation occurs in an electrochemical cell. The cathode is the electrode where reduction occurs in an electrochemical cell.
1. Oxidation: Oxidation is a chemical reaction that involves the loss of electrons by a substance. In this process, the oxidation state of the substance increases.
2. Reduction: Reduction is a chemical reaction that involves the gain of electrons by a substance. During reduction, the oxidation state of the substance decreases.
3. Standard Reduction Potential: The standard reduction potential is a measure of the tendency of a chemical species to undergo reduction (gain electrons) under standard conditions. It is expressed in volts and is used to compare the reducing power of various species.
4. Anode: The anode is the electrode where oxidation occurs in an electrochemical cell. Electrons are released from the anode, causing the oxidation state of the species at the anode to increase.
5. Cathode: The cathode is the electrode where reduction occurs in an electrochemical cell. Electrons are gained at the cathode, causing the oxidation state of the species at the cathode to decrease.
Oxidation is a chemical process where an element or molecule loses electrons. Reduction, on the other hand, is a chemical process where an element or molecule gains electrons. These two processes always occur together and are known as redox reactions. The direction of electron flow in a redox reaction can be predicted by the standard reduction potential, which is the tendency of a substance to gain or lose electrons compared to a standard hydrogen electrode. An anode is an electrode where oxidation occurs, while a cathode is an electrode where reduction occurs. In an electrochemical cell, electrons flow from the anode to the cathode, creating a potential difference between the two electrodes. The direction of this flow can be predicted by the standard reduction potentials of the two half-reactions involved.
Learn more about cathode here: brainly.com/question/4052514
#SPJ11
You heat 22.05 g of a solid in a test tube to 100.00°C and add it to 50.00 g of water in a coffee-cup calorimeter. The water temperature changes from 25.10°C to 28.49°C. Find the specific heat of the solid. Cwater = 4.184 J/g°C
The specific heat of the solid is 0.94 J/g°C.
To find the specific heat of the solid, follow these steps:
1. Calculate the heat gained by the water: q_water = m_water * C_water * ΔT_water = 50.00 g * 4.184 J/g°C * (28.49°C - 25.10°C)
2. Calculate the heat lost by the solid: q_solid = -q_water (heat gained by water is equal to heat lost by solid)
3. Calculate the temperature change of the solid: ΔT_solid = 100.00°C - 28.49°C
4. Calculate the specific heat of the solid: C_solid = q_solid / (m_solid * ΔT_solid) = -q_water / (22.05 g * ΔT_solid)
Using these steps, you can find the specific heat of the solid.
To know more about specific heat click on below link:
https://brainly.com/question/11297584#
#SPJ11
Ammonia (NH3) readily dissolves in water to yield a basic solution. NH3 + H2O - NH4+ + OH How is this substance classified? (AKS 59) A. Arrhenius Acid B. Bronsted-Lowry Base C. Bronsted-Lowry Acid D. Arrhenius Base
The definition of bases and acids by Bronsted-Lowry is quite straightforward. Proton acceptors include bases and acids, respectively. Water donates a proton in the ammonia-in-water example, resulting in NH3 + H2 O NH4 + + OH-, making water the acid. Hence (c) is the correct option.
Ammonia serves as the base since it receives the proton.As it donates a proton to the ammonia base, forming the ammonium ion and hydroxide ion, water acts as a bronsted acid in the following equation. Ammonium and hydroxide ions are the byproducts that are produced. A Bronsted-Lowry base is represented by the ammonia, whilst the water serves as the model's acid.
To know more about Bronsted-Lowry, click here:
https://brainly.com/question/14407412
#SPJ4
select the choice that correctly ranks the anions in order of leaving group ability (worst to best).
methoxide < chloride < acetate < tosylate tosylate < acetate < chloride < methoxide tosylate < chloride < acetate < methoxide methoxide < acetate < chloride < tosylate
The choice that correctly ranks the anions in order of leaving group ability (worst to best) is:
methoxide < acetate < chloride < tosylate
The stability of an anion is directly related to its ability to distribute the negative charge that arises from losing a bond. The distribution of negative charge is highly dependent on the electronegativity of the atom carrying the negative charge. In this case, the leaving group ability is being compared for four different anions: methoxide, acetate, chloride, and tosylate.
Methoxide has a highly electronegative oxygen atom carrying the negative charge, which can distribute the negative charge very efficiently. However, in acetate, the negative charge is distributed between two highly electronegative atoms - oxygen and carbon. This results in a slightly less stable anion, making it a slightly better leaving group than methoxide.
In chloride, the negative charge is carried by a less electronegative atom (chlorine), which makes it less stable than methoxide and acetate. Finally, in tosylate, the negative charge is delocalized over a highly conjugated aromatic ring system, which makes it the most stable of the four anions. Thus, tosylate is the best leaving group, followed by chloride, acetate, and methoxide in decreasing order of their leaving group abilities.
Know more about Leaving Group here:
https://brainly.com/question/28014622
#SPJ11
at a particular instant, a proton at the origin has velocity < 4e4, -3e4, 0> m/s. you need to calculate the magnetic field at location < 0.04, 0.06, 0 > m, due to the moving proton.
The magnetic field due to the moving proton at the point <0.04, 0.06, 0> m is 1.348 x 10⁻ ¹⁴T.
How to calculate the magnetic field at a particular location due to a moving proton?To calculate the magnetic field at a point due to a moving proton, we can use the Biot-Savart Law, which gives the magnetic field at a point P due to a current element dl at a point Q:
dB = (μ0/4π) x (Idl x r) /[tex]r^3[/tex]
where dB is the magnetic field at P, I is the current, dl is the current element at Q, r is the distance from Q to P, and μ0 is the permeability of free space.
In this case, the proton is moving, so we need to use the expression for the magnetic field due to a moving charge, which is given by:
dB = (μ0/4π) x (qv x r) /[tex]r^3[/tex]
where q is the charge of the particle, v is its velocity, and r is the distance from the particle to the point of interest.
To calculate the magnetic field at the given point <0.04, 0.06, 0> m, we need to find the distance from the proton to that point, which is:
r = sqrt[(0.04-0)² + (0.06-0)² + (0-0)²] = 0.08 m
The velocity of the proton is given as <4e4, -3e4, 0> m/s. So, the velocity vector is:
v = 4e4 i - 3e4 j + 0 k m/s
where i, j, and k are the unit vectors along the x, y, and z axes, respectively.
The charge of a proton is q = 1.602 x 10⁻ ¹⁹C, and the permeability of free space is μ0 = 4π x 10[tex]^-7[/tex] Tm/A.
Substituting all the values, we get:
dB = (4π x 10[tex]^-7[/tex] Tm/A) x (1.602 x 10⁻ ¹⁹C) x (4e4 i - 3e4 j + 0 k) x (0.04 i + 0.06 j) / (0.08)[tex]^3[/tex] = 1.348 x 10⁻ ¹⁴T
The magnetic field due to the moving proton at the point <0.04, 0.06, 0> m is 1.348 x 10⁻ ¹⁴T.
Learn more about magnetic field
brainly.com/question/14848188
#SPJ11
Consider 50 mL of a solution that is 0.25 M in both H_2PO^1-_4 and HPO^2- _4. (a) What is the pH of this solution? (Use the table of Acid Dissociation Constants. Enter your answer to two decimal places.) (b) What would be the effect of adding 5 mL of 1.0 M HCl? 1. The pH would decrease dramatically 2. The ph would increase dramatically. 3. The pH would decrease slightly. 4. The pH would increase slightly. 5. The pH would not change at all. (c) What would be the effect of adding 2 mL of saturated NaOH (50 mass %, density 1.5 g/mL)? a. The pH would increase dramatically. b. The pH would increase slightly. c. The pH would decrease dramatically. d. The pH would not change at all. e.The pH would decrease slightly.
(a) To find the pH of the solution, we need to use the following equation:
pH = pKa + log([HPO4^2-]/[H2PO4^-])
Using the values given in the problem, we can calculate the pH:
pKa for H2PO4^- = 7.21
[HPO4^2-] = [H2PO4^-] = 0.25 M
pH = 7.21 + log(0.25/0.25) = 7.21
Therefore, the pH of the solution is 7.21.
(b) When 5 mL of 1.0 M HCl is added to the solution, it will react with the H2PO4^- and convert it to H3PO4. This will result in an increase in the concentration of H3PO4 and a decrease in the concentration of H2PO4^-. This will lead to a decrease in the pH of the solution.
Therefore, the answer is (1) The pH would decrease dramatically.
(c) When 2 mL of saturated NaOH is added to the solution, it will react with the H3PO4 and convert it to H2PO4^- and HPO4^2-. This will result in an increase in the concentration of H2PO4^- and a decrease in the concentration of H3PO4. However, NaOH is a strong base and will continue to react with the H2PO4^- to form HPO4^2-. This will lead to an increase in the concentration of HPO4^2- and a decrease in the concentration of H2PO4^-. This will result in an increase in the pH of the solution.
Therefore, the answer is (b) The pH would increase slightly.
(a) To find the pH of the solution, we can use the Henderson-Hasselbalch equation: pH = pKa + log([A-]/[HA]). Given that the solution is 0.25 M in both H2PO4- (HA) and HPO42- (A-), the ratio [A-]/[HA] is 1. The pKa value for H2PO4- is approximately 7.2. So, pH = 7.2 + log(1) = 7.2. The pH of the solution is 7.20.
(b) Adding 5 mL of 1.0 M HCl will increase the concentration of H+ ions in the solution, which would cause the pH to decrease. The change in pH will not be dramatic, as the buffering capacity of the solution will help resist the change. So, the correct answer is 3. The pH would decrease slightly.
(c) Adding 2 mL of saturated NaOH (50 mass %, density 1.5 g/mL) will increase the concentration of OH- ions in the solution, causing the pH to increase. The change in pH will not be dramatic, as the buffering capacity of the solution will help resist the change. So, the correct answer is b. The pH would increase slightly.
Visit here to learn more about pH brainly.com/question/491373
#SPJ11
Calculate ka for the weak acid based on the ph when the acid is 1/4 1/2 and 3/4 neutralized.
The titration Ka values at the 1/4 and 3/4 equivalence points are 5.02 x [tex]10^{-6}[/tex] and 1.39 x [tex]10^{-5}[/tex], respectively.
To calculate the Ka for the weak acid based on the pH at the 1/4 and 3/4 equivalence points, we first need to calculate the pKa of the acid using the pH at the 1/2 equivalence point.
pH at 1/2 eq point = pKa
pH at 1/2 eq point = 4.85
pKa = 4.85
Now we can use the Henderson-Hasselbalch equation to calculate the ratio of the concentrations of the acid and its conjugate base at the 1/4 and 3/4 equivalence points:
pH = pKa + log([A-]/[HA])
For the 1/4 equivalence point:
4.46 = 4.85 + log([A-]/[HA])
log([A-]/[HA]) = -0.39
[A-]/[HA] = 0.44
For the 3/4 equivalence point:
5.72 = 4.85 + log([A-]/[HA])
log([A-]/[HA]) = 0.87
[A-]/[HA] = 7.92
At the 1/4 equivalence point, 1/5 of the acid has been neutralized, and the ratio of the concentrations of the acid and its conjugate base is 0.44.
At the 3/4 equivalence point, 3/5 of the acid has been neutralized, and the ratio of the concentrations of the acid and its conjugate base is 7.92.
Using the law of conservation of mass, we can write the following equations for the concentrations of the acid and its conjugate base at the 1/4 and 3/4 equivalence points:
[A-]1/4 = [HA]1/4/0.44
[A-]3/4 = [HA]3/4 x 7.92
Since we know the initial concentration of the acid, we can use these equations to calculate the concentrations of the acid and its conjugate base at the 1/4 and 3/4 equivalence points:
For the 1/4 equivalence point:
[HA]1/4 = (1/4) x [HA]initial = (1/4) x [A-]Initial
[HA]1/4 = (1/4) x ([A-]1/4 + [HA]1/4)
[HA]1/4 = 0.309 [HA]Initial
[A-]1/4 = 0.691 [HA]Initial
For the 3/4 equivalence point:
[HA]3/4 = (1/4) x [HA]initial = (1/4) x [A-]Initial
[HA]3/4 = (1/4) x ([A-]3/4 + [HA]3/4)/7.92
[HA]3/4 = 0.045 [HA]Initial
[A-]3/4 = 0.355 [HA]Initial
Finally, we can use the equilibrium constant expression for the dissociation of the weak acid to calculate the Ka values at the 1/4 and 3/4 equivalence points:
Ka = [H+][A-]/[HA]
For the 3/4 equivalence point:
5.72 = -log([H+])
[H+] = 1.77 x [tex]10^{-6}[/tex]
Ka = (1.77 x [tex]10^{-6}[/tex])(0.355 [HA]initial)/(0.045 [HA]initial)
Ka = 1.39 x [tex]10^{-5}[/tex]
Therefore, the Ka values at the 1/4 and 3/4 equivalence points are 5.02 x [tex]10^{-6}[/tex] and 1.39 x [tex]10^{-5}[/tex], respectively.
Learn more about titration at
https://brainly.com/question/31271061
#SPJ4
The question is -
Calculate the Ka for the weak acid based on the pH when the acid is 1/4 and 3/4 neutralized (i.e. the 1/4 and 3/4 equivalence points). (titrated with NaOH)
pH at 1/4 eq point: 4.46
pH at 3/4 eq point: 5.72
((pH=pka at 1/2 eq point: 4.85))
A sample of NOBr (0.64 mol) was placed in a 1.00-L flask containing no NO or Br2. At equilibrium the flask contained 0.31 mol of NOBr. How many moles of NO and Br2, respectively, are in the flask at equilibrium?
A sample of 0.64 mol NOBr was placed in a 1.00-L flask containing no NO or [tex]Br2[/tex]. At equilibrium, flask contained 0.31 mol of NOBr. Using the equilibrium constant expression, we were able to calculate that 0.288 mol of both NO and [tex]Br2[/tex] were formed and 0.352 mol of NOBr remained.
The reaction for NOBr is as follows: 2 NOBr (g) ⇌ 2 NO (g) + [tex]Br^{2}[/tex] (g) From the given information, we know that initially there was no NO or bromine gas in the flask, and 0.64 mol of NOBr was added. At equilibrium, 0.31 mol of NOBr was present in the flask.
Let x be the number of moles of NO and bromine gas formed at equilibrium. Thus, the number of moles of NOBr remaining at equilibrium would be 0.64 - x. The equilibrium constant expression for the reaction is:[tex]Kc = ([NO]2[Br2]) / [NOBr]2[/tex]
We can use this expression to solve for x. At equilibrium,[tex]Kc = 4.6 x 10^-2[/tex](given in the question). Substituting the values we know into the expression, we get: [tex]4.6 x 10^-2 = (x^2) / (0.64 - x)^2[/tex]
Solving for x gives us x = 0.288 mol. This means that 0.288 mol of both NO and bromine gas were formed at equilibrium.
Know more about equilibrium constant here:
https://brainly.com/question/31321186
#SPJ11
show the reaction mechanism when 2-methyl-2-butanol, sulfuric acid(H2SO4), and water are in a mixture
When 2-methyl-2-butanol, sulfuric acid (H₂SO), and water are in a mixture, the reaction mechanism involves an acid-catalyzed dehydration of the alcohol.
The reaction mechanism of 2-methyl-2-butanol, sulfuric acid (H₂SO), and water are in a mixture are
1. Protonation of the alcohol: 2-methyl-2-butanol reacts with H₂SO₄, and the alcohol group (OH) is protonated, forming a good leaving group, water (H₂O).
2. Formation of the carbocation: The water molecule leaves, generating a tertiary carbocation at the 2-position of the 2-methyl-2-butanol molecule.
3. Elimination of a beta-hydrogen: A water molecule acts as a base and removes a beta-hydrogen from the carbocation, forming a double bond.
4. Deprotonation: A conjugate base of H₂SO₄ (HSO₄⁻) accepts the released proton, regenerating the H2₂SO₄ catalyst.
The final product of the reaction mechanism is 2-methyl-2-butene, and the reaction is an acid-catalyzed dehydration of 2-methyl-2-butanol.
Learn more about sulfuric acid: https://brainly.com/question/29303579
#SPJ11
Why is the Grignard reagent prepared in excess relative to the aldehyde?a) Preparing the Grignard is the purpose of the experimentb) The Grignard reagent is fragile, and some may be lost to moisture.c) The Grignard reagent is less expensive to prepare.
The Grignard reagent is prepared in excess relative to the aldehyde because the Grignard reagent is fragile, and some may be lost to moisture.
By using an excess, it ensures that there is enough reagent present to react with the aldehyde, leading to the desired product. The Grignard reagent is prepared in excess relative to the aldehyde for two main reasons. Firstly, preparing the Grignard is the purpose of the experiment, and having an excess ensures that there is enough to react with all of the aldehyde.
Secondly, the Grignard reagent is fragile and some may be lost to moisture during preparation or storage. By preparing an excess, there is a greater chance that enough reagent will remain to react with the aldehyde. Additionally, the Grignard reagent is typically more expensive to prepare than the aldehyde, so using an excess may not be cost-effective, but it is necessary to ensure a successful reaction.
To learn more about Grignard reagent click here
brainly.com/question/30144052
#SPJ11
Classify the following proteins as α, β, or α/β:(a) Grb2(b) plastocyaninplease explain each answer
Grb2 is an α/β protein and plastocyanin is a β protein.
The reason for the above classification is as follows:
(a) Grb2 is classified as an α/β protein because it contains both α-helices and β-sheets in its secondary structure. Grb2 plays a role in signal transduction by binding to other proteins such as receptor tyrosine kinases. It is an adaptor protein that helps with cell communication.
(b) Plastocyanin is classified as a β protein because it primarily contains β-sheets in its secondary structure. Plastocyanin is a copper-containing protein involved in photosynthesis in plants and algae. It is involved in mediating electron-transfer.
To know more about protein synthesis and protein structure visit: https://brainly.com/question/26371389
#SPJ11
Suppose you had to subsist on a diet of whale blubber and seal blubber, with little or no carbohydrate.
(a) What would be the effect of carbohydrate deprivation on the utilization of fats for energy?
(b) If your diet were totally devoid of carbohydrate, would it be better to consume odd- or even-numbered fatty acids? Explain.
(a) Carbohydrate deprivation would increase the utilization of fats for energy because the body would switch to ketone bodies as an alternative energy source.
(b) If the diet were totally devoid of carbohydrates, it would be better to consume odd-numbered fatty acids because they can be converted into glucose through gluconeogenesis, which is essential for providing energy to the brain and other tissues that require glucose as a fuel source.
(a) Carbohydrate deprivation forces the body to switch from using glucose as an energy source to using fats. When glucose is not available, the body begins to break down stored fat into fatty acids, which are then transported to the liver and converted into ketone bodies.
These ketone bodies can then be used as an alternative fuel source by the brain and other tissues. Therefore, the utilization of fats for energy would increase in the absence of carbohydrates.
(b) Even-numbered fatty acids cannot be converted into glucose through gluconeogenesis because they yield only acetyl-CoA molecules when they are broken down. However, odd-numbered fatty acids can be converted into glucose through gluconeogenesis because they yield propionyl-CoA, which can be converted into glucose in the liver.
Since glucose is essential for providing energy to the brain and other tissues that require glucose as a fuel source, it would be better to consume odd-numbered fatty acids if the diet were totally devoid of carbohydrates.
To know more about fatty acids click here:
https://brainly.com/question/5710423
#SPJ11
Which factors make the climates different at Missoula, MT and Cape Elizabeth, ME. ?
The factor that make the climates different at Missoula, MT and Cape Elizabeth, ME is C. altitude and proximity to large bodies of water.
Why is the climate different ?Missoula, MT is located in a high-altitude region and is far from large bodies of water, which results in a continental climate with cold winters and hot summers.
Cape Elizabeth, ME is located at a lower altitude and is near the Atlantic Ocean, which results in a maritime climate with mild winters and cool summers.
In conclusion, one of the factors that endures that the climates in Missoula and Cape Elizabeth, is the altitude as well as how close they are to oceans.
Find out more on climate difference at https://brainly.com/question/18120343
#SPJ1
If the bonding in [Mno4] were 100% ionic, what would be the charges on Mn and O atoms? Ifthe charges were redistributed, so that the charge on Mnis +1, what are the charges on each o atom? What does this charge distribution tells about the covalent character in the Mn-O bonds?
If the bonding in [Mno₄] were 100% ionic, Mn would have a charge of +7 and each O atom would have a charge of -2.
If the charge on Mn is +1, each O atom would have a charge of -1. This redistribution of charges indicates that there is some covalent character in the Mn-O bonds since the electrons are shared between the atoms.
The fact that the charges on the O atoms are not -2 anymore indicates that the electrons are not completely transferred from Mn to O, which suggests that there is a partial sharing of electrons.
This charge distribution reflects the degree of polarity in the bond, with a greater degree of covalent character leading to a more even distribution of charges between the atoms.
To know more about covalent character click on below link:
https://brainly.com/question/15303614#
#SPJ11
Place the following in order of decreasing metallic character. Si S PCI O Si > P > S > CI OS > P > Cl > Si OP > Si > S > CI OCI > P > S > Si O CI > S > P > Si
The metallic character of elements decreases across a period and increases down a group in the periodic table. Based on this trend, we can rank the given elements in decreasing order of metallic character:
Si > P > S > Cl > O
Now, let's arrange the given options in order of decreasing metallic character:
Si > P > S > Cl: This order agrees with our trend, so it is correct.OS > P > Cl > Si: This order is incorrect because Cl has a lower metallic character than Si, so it should come after Si.OP > Si > S > Cl: This order is also incorrect because S has a lower metallic character than Si, so it should come after Si.OCI > P > S > Si: This order is correct because Si has the highest metallic character, followed by S, then P, and finally CI.CI > S > P > Si: This order is incorrect because P has a lower metallic character than S, so it should come after S.Therefore, the correct order of decreasing metallic character is:
Si > P > S > CI > O
Learn more about metallic character
https://brainly.com/question/27962387
#SPJ4
chemistry graduate student is given of a 100 ml acetic acid 0.50 m solution. acetic acid is a weak acid with . what mass of should the student dissolve in the solution to turn it into a buffer with ph
To turn the 100 ml acetic acid solution into a buffer with a specific pH, the chemistry graduate student needs to dissolve a specific mass of a salt into the solution. In this case, the desired pH is not specified, so let's assume that the student wants to make a buffer with a pH of 4.76, which is the p Ka of acetic acid.
To calculate the mass of salt needed, we can use the Henderson-Hasselbalch equation:
pH = pKa + log([salt]/[acid])
where [salt] and [acid] are the concentrations of the salt and acid in the buffer, respectively. Since we want to turn the 0.50 M acetic acid solution into a buffer, we know that [acid] = 0.50 M. We also know that at pH 4.76, the ratio [salt]/[acid] should be 1.
So, we can rearrange the equation to solve for [salt]:
[salt]/[acid] = 10^(pH - pKa)
[salt]/0.50 = 10^(4.76 - 4.76)
[salt]/0.50 = 1
[salt] = 0.50 M
This means that the concentration of the salt in the buffer should be 0.50 M. To calculate the mass of salt needed to achieve this concentration, we can use the formula:
mass = moles x molar mass
where moles = concentration x volume. The volume is 100 ml, or 0.1 L. The concentration we want is 0.50 M, so:
moles = 0.50 M x 0.1 L = 0.05 moles
The molar mass of the salt depends on which salt is chosen, but let's assume that the student chooses sodium acetate (CH3COONa), which has a molar mass of 82.03 g/mol. Then:
mass = 0.05 moles x 82.03 g/mol = 4.10 g
Therefore, the chemistry graduate student should dissolve 4.10 g of sodium acetate in the 100 ml acetic acid 0.50 M solution to turn it into a buffer with a pH of 4.76
To prepare a buffer solution with a specific pH using 100 ml of 0.50 M acetic acid, you'll need to follow these steps:
1. Determine the desired pH of the buffer solution.
2. Find the pKa value of acetic acid (pKa = 4.76).
3. Calculate the ratio of the concentrations of the conjugate base (acetate ion) and the weak acid (acetic acid) using the Henderson-Hasselbalch equation: pH = pKa + log([A-]/[HA]).
4. Determine the moles of acetic acid in the 100 ml solution (0.50 mol/L × 0.100 L = 0.050 mol).
5. Calculate the moles of the conjugate base (acetate ion) needed based on the ratio from step 3.
6. Convert the moles of the conjugate base to mass by multiplying it with the molar mass of the acetate ion (CH3COO-, molar mass = 59.0 g/mol).
Following these steps, the chemistry graduate student should be able to dissolve the correct mass of the acetate ion in the 100 ml 0.50 M acetic acid solution to turn it into a buffer with the desired pH.
Visit here to know more about acetic acid solution:
brainly.com/question/16737443
#SPJ11
Suppose that the hydroxide ion concentration of an aqueous solution at 25 °C is 2.8 x 10^-7 M. What is the hydronium ion concentration of the solution? • Your answer should include two significant figures. • Write your answer in scientific notation. Use the multiplication symbol rather than the letter x in your answer. Provide your answer below: ___M
At 25 °C, the product of the hydronium ion concentration and the hydroxide ion concentration is always equal to 1.0 x 10^-14 (at standard pressure).
Therefore, if the hydroxide ion concentration is 2.8 x 10^-7 M, we can calculate the hydronium ion concentration as:
hydronium ion concentration = 1.0 x 10^-14 / hydroxide ion concentration
hydronium ion concentration = 1.0 x 10^-14 / 2.8 x 10^-7
hydronium ion concentration = 3.57 x 10^-8 M
So the hydronium ion concentration of the solution is 3.57 x 10^-8 M (to two significant figures).
Standard pressure is the atmospheric pressure measured at sea level and is equal to 1 atmosphere (atm), 101.3 kilopascals (kPa), 760 millimeters of mercury (mmHg), or 29.92 inches of mercury (inHg). It is often used as a reference point in scientific experiments and calculations.
Visit here to learn more about standard pressure brainly.com/question/15842060
#SPJ11
predict the ideal bond angles in asf3 using the molecular shape given by the vsepr theory. a. <109.5° b. 90° c. 120° d. 180° e. 109.5° f. >109.5° g. <120° h. >120°
The ideal bond angles in AsF3, using the VSEPR theory, can be predicted as a. <109.5°.
AsF3 has a trigonal pyramidal molecular shape, determined by the VSEPR theory. In this structure, there are three bonding electron pairs (F-As-F) and one lone pair of electrons on the central arsenic (As) atom.
The lone pair causes a repulsive effect, leading to a slightly smaller bond angle than the standard 109.5° in a perfect tetrahedral arrangement. As a result, the ideal bond angle in AsF3 is slightly less than 109.5°.
To know more about VSEPR theory click on below link:
https://brainly.com/question/14992767#
#SPJ11
a solution is prepared using the butyric acid/butyrate (c4h8o2/c4h8o2-) acid base pair. the ratio of acid to base is 2.2 and ka for butyric acid is 1.54 x 10-5. what is the ph of the solution?
The pH of the prepared solution is approximately 4.47.
To determine the pH of a solution prepared using the butyric acid/butyrate (C₄H₈O₂/C₄H₈O₂⁻) acid-base pair with a ratio of acid to the base of 2.2 and a Ka for butyric acid of 1.54 x 10^-5, follow these steps:
1. Write down the given values:
- Acid/Base ratio = 2.2
- Ka = 1.54 x 10^-5
2. Using the Henderson-Hasselbalch equation:
pH = pKa + log₁₀([Base]/[Acid])
3. Calculate the pKa from the given Ka:
pKa = -log₁₀(Ka) = -log₁₀(1.54 x 10^-5) ≈ 4.81
4. Substitute the given ratio of acid to base into the equation:
[Base] = 1 (let the concentration of base be 1)
[Acid] = 2.2 (the concentration of acid is 2.2 times the base concentration)
5. Plug these values and the pKa into the Henderson-Hasselbalch equation:
pH = 4.81 + log₁₀(1/2.2)
6. Calculate the pH:
pH ≈ 4.81 - 0.34 ≈ 4.47
Therefore, the pH of the solution is approximately 4.47.
Learn more about pH at https://brainly.com/question/172153
#SPJ11
what is the percent yield of co2 if a reaction starts with 91.3 g c3h6 and produces 87.0 g co2?
The percent yield of CO₂ if a reaction starts with 91.3 g C₃H₆ and produces 87.0 g CO₂ is 30.4%.
To calculate the percent yield of CO₂, you need to first determine the theoretical yield and then use the actual yield (87.0 g CO₂) to find the percent yield.
1. Balance the reaction: C₃H₆ + O₂ → 3CO₂ + 3H₂O
2. Calculate the molar mass of C₃H₆
(3C + 6H) = (3 × 12.01 + 6 × 1.01)
= 42.08 g/mol
3. Calculate the moles of C₃H₆:
(91.3 g C₃H₆) / (42.08 g/mol)
= 2.168 moles C₃H₆
4. Since the ratio between C₃H₆ and CO₂ is 1:3, moles of CO₂
= 3 * 2.168
= 6.504 moles
5. Calculate the molar mass of CO₂ (C + ₂O)
= (12.01 + 2 × 16.00)
= 44.01 g/mol
6. Calculate the theoretical yield:
(6.504 moles CO₂) × (44.01 g/mol)
= 286.2 g CO₂
7. Calculate the percent yield:
(Actual yield / Theoretical yield) × 100
= (87.0 g CO₂ / 286.2 g CO₂) × 100
= 30.4%
Thus, the percent yield of CO₂ in this reaction is 30.4%.
Learn more about percent yield of CO₂: https://brainly.com/question/29578148
#SPJ11
What is the solvent for the reaction? esterification-the synthesis of fragrant esters
The solvent for the esterification reaction is typically an organic solvent like an alcohol or an acid.
In the esterification process, an organic acid reacts with an alcohol to produce a fragrant ester and water as a byproduct. This reaction is an equilibrium process, and it typically requires a catalyst, such as a strong acid like sulfuric acid or a solid acid catalyst, to speed up the reaction rate. The use of an appropriate solvent helps to dissolve the reactants and improve the efficiency of the reaction.
In many cases, the alcohol or acid used in the esterification can act as the solvent itself. For instance, if you are synthesizing ethyl acetate (an ester) using acetic acid and ethanol, both of these reactants can act as solvents for the reaction.
Alternatively, other common organic solvents, such as methanol, can be used in the esterification process. The choice of solvent depends on factors like the solubility of the reactants, reaction rate, and the desired properties of the final product.
To know more about esterification reaction click on below link:
https://brainly.com/question/31118260#
#SPJ11
Draw a product for the intramolecular aldol reaction of 2,5 hexanedione.
The item for the intramolecular aldol response (with lack of hydration) of 2,5-hexanedione is 3,5-dimethyl-2-cyclopentenone.
Follow these steps to draw the product:1. Distinguish the responsive destinations: 2,5-hexanedione alpha-carbon, which is next to the carbonyl groups, can be an electrophile and a nucleophile.
2. Enolate is formed: Deprotonate the alpha-carbon of the less blocked carbonyl gathering to frame an enolate anion.
3. Aldol intramolecular reaction:The other ketone carbonyl group is attacked by the enolate anion, resulting in an alcohol and a 5-membered ring.
4. Dehydration: A conjugated enone is produced when the alcohol produced by the aldol reaction loses a water molecule to form a double bond.
3,5-dimethyl-2-cyclopentenone, a 5-membered ring with a conjugated enone system, is the finished product.
What is aldol response ?An organic reaction known as "aldol condensation" involves the enolate ion reacting with a carbonyl compound to produce "-hydroxy ketone" or "-hydroxy aldehyde," then dehydrating to produce "conjugated enone." Aldol condensation is a crucial step in organic synthesis because it opens the way for carbon-carbon bonds to form.
Learn more about Aldol reaction :
brainly.com/question/31491024
#SPJ4
the zinc in a 1.66g sample of foot power was precipitated as znh4po4. the percipitate was then heatin converiting
To determine the mass of zinc in the original sample of foot powder, we need to use stoichiometry and the given information about the masses of the precipitates obtained.
The balanced chemical equation for the reaction is:
[tex]3 ZnNH_{4} PO_{4}[/tex] + heat → [tex]Zn_{3} (PO_{4} )_{2}[/tex] + 3 [tex]NH_{4} VO_{3}[/tex] + 3 [tex]H_{2} O[/tex]
According to the equation, 3 moles of [tex]Zn_{3} (PO_{4} )_{2}[/tex] react to form 1 mole of [tex]Zn_{3} (PO_{4} )_{2}[/tex].
We must first determine the quantity of moles of [tex]ZnNH_{4} PO_{4}[/tex] obtained:
n([tex]ZnNH_{4} PO_{4}[/tex]) = m/M
where m = mass of [tex]ZnNH_{4} PO_{4}[/tex] obtained = 2.34 g
M = molar mass of [tex]ZnNH_{4} PO_{4}[/tex] = 243.3 g/mol
n([tex]ZnNH_{4} PO_{4}[/tex]) = 2.34 g / 243.3 g/mol = 0.00961 mol
Next, we can use the mole ratio from the balanced equation to calculate the number of moles of [tex]Zn_{3} (PO_{4} )_{2}[/tex] formed:
n([tex]Zn_{3} (PO_{4} )_{2}[/tex]) = n([tex]ZnNH_{4} PO_{4}[/tex]) / 3 = 0.00961 mol / 3 = 0.00320 mol
Finally, we can calculate the mass of zinc present in the original sample of foot powder:
m(Zn) = n([tex]Zn_{3} (PO_{4} )_{2}[/tex]) × M([tex]Zn_{3} (PO_{4} )_{2}[/tex]) × (1 mol Zn / 1 mol [tex]Zn_{3} (PO_{4} )_{2}[/tex])
where M([tex]Zn_{3} (PO_{4} )_{2}[/tex]) = molar mass of [tex]Zn_{3} (PO_{4} )_{2}[/tex]= 386.1 g/mol
m(Zn) = 0.00320 mol × 386.1 g/mol × (1 mol Zn / 1 mol [tex]Zn_{3} (PO_{4} )_{2}[/tex] ) = 1.24 g
Therefore, the mass of zinc present in the original sample of foot powder was approximately 1.24 grams.
Learn more about mass of zinc
https://brainly.com/question/29834890
#SPJ4
Complete Question:
What mass of zinc was present in the original sample of foot powder if 2.34 grams of [tex]ZnNH_{4} PO_{4}[/tex] precipitate were obtained, and upon heating, the precipitate converted to 1.97 grams of [tex]Zn_{3} (PO_{4} )_{2}[/tex]?
Two pollutants that form in auto exhaust are CO and NO. An environmental chemist must convert these pollutants to less harmful gases through the following:CO(g) + NO(g) ? CO2(g) + 1 2 N2(g) ?H = ?Given the following information, calculate the unknown ?H:Equation A: CO(g) + 1 2 O2(g) ? CO2(g ) ?H = -283.0 kJEquation B: N2(g) + O2(g) ? 2NO(g) ?H = 180.6 kJ
Two pollutants that form in the auto exhaust are the CO and NO. The ΔH for the reaction is - 373.3 kJ.
The chemical equations are as :
CO(g) + 1/2O₂(g) -----> CO₂(g) ΔH = - 283 kJ
NO(g) + 1/2N₂(g) + 1/2O₂(g) ΔH = -90.3 kJ
Equations 1 and the equation 2 , manipulated by the reversal and multiplied by the factors in order to add the equation. So, Multiply the equation 2 by the 1/2 and then reverse it. The equation is :
CO(g) + NO(g) -----> CO₂(g) + 1/2N₂(g)
The enthalpy change, ΔH for the reaction = - 283 kJ - ( -90.3 kJ)
The enthalpy change, ΔH for the reaction = - 373.3 kJ.
To learn more about enthalpy change here
https://brainly.com/question/14087998
#SPJ4
Two pollutants that form in the auto exhaust are the CO and NO. The ΔH for the reaction is - 373.3 kJ.
The chemical equations are as :
CO(g) + 1/2O₂(g) -----> CO₂(g) ΔH = - 283 kJ
NO(g) + 1/2N₂(g) + 1/2O₂(g) ΔH = -90.3 kJ
Equations 1 and the equation 2 , manipulated by the reversal and multiplied by the factors in order to add the equation. So, Multiply the equation 2 by the 1/2 and then reverse it. The equation is :
CO(g) + NO(g) -----> CO₂(g) + 1/2N₂(g)
The enthalpy change, ΔH for the reaction = - 283 kJ - ( -90.3 kJ)
The enthalpy change, ΔH for the reaction = - 373.3 kJ.
To learn more about enthalpy change here
https://brainly.com/question/14087998
#SPJ4
a tank has a pressure of 30.0 atm at a temperature of 22.0oc. after heating, the temperature rises to 35.0oc. what is the new pressure
The new pressure on the Tank is 31.3 atm.
To find the new pressure, we can use the formula derived from the Gay-Lussac's Law, which states that the pressure of a gas is directly proportional to its temperature when the volume remains constant. The formula is:
P1/T1 = P2/T2
where P1 is the initial pressure, T1 is the initial temperature in Kelvin, P2 is the final pressure, and T2 is the final temperature in Kelvin. First, convert the temperatures from Celsius to Kelvin:
T1 = 22.0°C + 273.15 = 295.15 K
T2 = 35.0°C + 273.15 = 308.15 K
Now, plug in the given values and solve for P2:
(30.0 atm) / (295.15 K) = P2 / (308.15 K)
P2 = (30.0 atm) × (308.15 K) / (295.15 K) ≈ 31.3 atm
The new pressure after heating is approximately 31.3 atm.
Know more about Pressure here:
https://brainly.com/question/30673967
#SPJ11
rank the following in order of decreasing ionic character: 1 = most ionic, 3 = least ionic
KF
MgO
Lil
The ionic character of a bond depends on the electronegativity difference between the two atoms involved. The greater the electronegativity difference, the more ionic the bond.
Based on the electronegativity values of the elements, we can rank the compounds in order of decreasing ionic character:
MgO: Magnesium has an electronegativity of 1.31 and oxygen has an electronegativity of 3.44. The electronegativity difference is 2.13, indicating a highly ionic bond. Therefore, MgO is the most ionic compound among the given options.
KF: Potassium has an electronegativity of 0.82 and fluorine has an electronegativity of 3.98. The electronegativity difference is 3.16, which is also indicative of a highly ionic bond.
LiI: Lithium has an electronegativity of 0.98 and iodine has an electronegativity of 2.66. The electronegativity difference is 1.68, which is smaller than the other two options, indicating a lower ionic character. Therefore, LiI is the least ionic compound among the given options.
Therefore, the ranking in order of decreasing ionic character is:
MgO
KF
LiI
learn more abouT ionic character here:
https://brainly.com/question/28897253
#SPJ4
Classify each of the following solutions as saturated, unsaturated, or supersaturated based on the following observations.
a. Agitation of the solution produces a large amount of solid crystals.
b. Heating the solution causes excess undissolved solute present to dissolve.
c. Excess undissolved solute is present at the bottom of the solution container.
d. The amount of solute dissolved is less than the maximum amount that could dissolve under the conditions at which the solution exists.
a. Agitation of the solution produces a large number of solid crystals that are supersaturated. b. Heating the solution causes excess undissolved solute present to dissolve unsaturated. c. The excess undissolved solute present at the bottom of the solution container is saturated. d. The amount of solute dissolved is less than the maximum amount that could dissolve under the conditions at which the solution exists is unsaturated.
a. The solution is supersaturated because agitation causes excess solute to come out of the solution and form crystals.
b. The solution is unsaturated because heating causes more solute to dissolve, indicating that less than the maximum amount is currently dissolved.
c. The solution is saturated because excess undissolved solute is present at the bottom of the container, indicating that the maximum amount of solute has dissolved under the current conditions.
d. The solution is unsaturated because the amount of solute dissolved is less than the maximum amount that could dissolve, indicating that more solute can still be added to the solution.
Learn more about solutions at brainly.com/question/30665317
#SPJ11