An electric kettle uses electrical energy to boil water. Energy from the electricity is transferred to the water, heating it up. An electric ice maker also uses electrical energy, but it freezes water to form ice. Since energy can’t be created or destroyed, and water loses potential energy when it freezes to form ice, what happens to the energy put into the ice maker and the energy released by the water?

Answers

Answer 1

Answer:

Since energy can’t be created or destroyed, and water loses potential energy when it freezes to form ice. The energy remains electrical but then changes to kinetic when Enough energy is released.

Explanation:

Answer 2

The excess electrical energy gained by water during ice forming process is removed as potential energy to maintain law of conservation of energy.

According to the principle of conservation of energy, energy can neither be created nor destroyed but can transformed from one form to energy.

The electrical energy used by the ice maker to freeze water works on the same principle of conservation of energy.

The electrical energy absorbed the water is used to lower the temperature of the water in order to form ice by removing heat from the water in form of potential energy. This happens to maintain the principle of conservation of energy.

Thus, the excess electrical energy gained by water during ice forming process is removed as potential energy to maintain law of conservation of energy.

Learn more about conservation of energy here: https://brainly.com/question/166559


Related Questions

1 point
To help you with estimating, the individual answers to A, B, C should all
have zero in the one's place. Add those answers up to get the numerical
code. Input that code to move on.*
A) 56 g NH3 can be dissolved in 100 g of water at °C
B) At 50°C, 166 g of KNO, can be dissolved in g of water to make a saturated
solution
C) At 76°C, KCI and HCI have the same solubility. What mass of each could be dissolved in
80 g of water?
Your answer
This is a required question
Back
Next

Answers

Answer:ee

Explanation:

How many atoms are there in 24 moles of Fe?

Answers

Answer: There are [tex]145 \times 10^{23}[/tex] atoms in 24 moles of Fe.

Explanation:

According to the mole concept, 1 mole of a substance contains [tex]6.022 \times 10^{23}[/tex] atoms.

Therefore, atoms present in 24 moles of Fe are calculated as follows.

[tex]24 mol \times 6.022 \times 10^{23} atoms/mol\\= 144.52 \times 10^{23} atoms\\or, 145 \times 10^{23} atoms[/tex]

Thus, we can conclude that there are [tex]145 \times 10^{23}[/tex] atoms in 24 moles of Fe.

Calculate the concentration of NO2NO2 in an equilibrium mixture given that the concentration of N2O4=0.200MN2O4=0.200M and Keq=67.3Keq=67.3 for the reaction: 2NO2(g)⇌N2O4(g)2NO2(g)⇌N2O4(g). Calculate the concentration of in an equilibrium mixture given that the concentration of and for the reaction: . 18.3 M 0.00297 M 337 M 0.0545 M none of the above

Answers

Answer: The concentration of [tex]NO_{2}[/tex] in the given equilibrium mixture is 0.0545 M.

Explanation:

The ratio of concentration of products and reactants raised to the power of their coefficients is called equilibrium constant. The symbol used to denote equilibrium constant is [tex]K_{eq}[/tex].

As the given reaction equation is as follows.

[tex]2NO_{2}(g) \rightleftharpoons N_{2}O_{4}(g)[/tex]

The expression for equilibrium constant of this reaction is as follows.

[tex]K_{eq} = \frac{[N_{2}O_{4}]}{[NO_{2}]^{2}}[/tex]

Now, substitute the given values into above formula as follows.

[tex]K_{eq} = \frac{[N_{2}O_{4}]}{[NO_{2}]^{2}}\\67.3 = \frac{(0.2)}{[NO_{2}]^{2}}\\So, [NO] = \sqrt{\frac{0.2}{67.3}}\\= 0.0545 M[/tex]

Thus, we can conclude that the concentration of [tex]NO_{2}[/tex] in the given equilibrium mixture is 0.0545 M.

Ito ang web browser na kapalit ng Internet Explorer! plsssss help naman ako epp po ito hindi ko po alam ​

Answers

Answer:

p o e t i c o

Explanation:

no lo entenderias

If 348 grams of Mg(OH)2 reacts with excess HCl (this is CL chlorine, not C and I), how many moles of MgCl2 (this is CL chlorine, not C and I) are produced?

Answers

Answer:

moles MgCl₂ = 5.97 moles

Explanation:

First, let0s write the overall reaction that is taking place here:

Mg(OH)₂ + HCl ----------> MgCl₂ + H₂O

Now, we need to balance this reaction:

Mg(OH)₂ + 2HCl ----------> MgCl₂ + 2H₂O

Now, the exercise already stated that the HCl is in excess, so we can assume the magnesium hydroxide is the limiting reactant. If this is true, then, to get the moles of MgCl₂ produced, all we need to do is calculate the moles of Mg(OH)₂ that reacted, using the following expression:

moles = mass / MM

The atomic weights for Mg, O and H are:

Mg: 24.305 g/mol;  H: 1 g/mol;  O = 15.999 g/mol

Let's determine the molar mass of Mg(OH)₂:

MM = 24.305 + (2 * 15.999) + (2 * 1) = 58.303 g/mol

Now, let's determine the moles:

moles = 348 g / 58.303 g/mol = 5.97 moles of Mg(OH)₂

As we can see in the overall reaction, there is a mole ration between Mg(OH)₂ and MgCl₂ of 1:1, that's why we can conclude that the moles of Mg(OH)₂ would be the same moles of MgCl₂:

moles Mg(OH)₂ = moles MgCl₂ = 5.97 moles

Hope this helps

Convert 61 μg of aluminum phosphate to grams. (Hint: 1 μg = 1 x 10-6 g, so multiply 61 by 1 x 10-6)

Answers

Answer: 61 μg of aluminum phosphate in grams is equal to [tex]61 \times 10^{-6} g[/tex].

Explanation:

According to standard conversion of units, 1 microgram [tex](\mu g)[/tex] is equal to [tex]1 \times 10^{-6}[/tex] g.

Therefore, [tex]61 \mu g[/tex] is converted into grams as follows.

[tex]1 \mu g = 10^{-6} g\\61 \mu g = 61 \mu g \times \frac{10^{-6}}{1 g}\\= 61 \times 10^{-6} g[/tex]

Thus, we can conclude that 61 μg of aluminum phosphate in grams is equal to [tex]61 \times 10^{-6} g[/tex].

A catalyst is:

a chemical found in leaves
a chemical which promotes a chemical reaction
a chemical which reacts with sunlight
a cell with chlorophyll

Answers

a catalyst is a substance that increases the rate of a chemical reaction without itself being consumed . (ans: second choice)

[tex] \huge \mathrm{ \underline{Answer} ࿐}[/tex]

The correct option is B.

A Catalyst is a chemical which promotes or speed up a chemical reaction without undergoing any chemical reaction itself.

for example : potassium permanganate - Hydrogen peroxide will decompose into water and oxygen gas in the presence of KMnO4.

_____________________________

[tex]\mathrm{ \#TeeNForeveR}[/tex]

How do scientists determine the names for so many different living things

Answers

Answer:

Taxonomy

Explanation:

who am I? my number name has the same number of letters as me. I am number _____​

Answers

Answer:

four

is the answer

THIS IS EASY

How does an ecosystem benefit when leaves fall from a tree and decompose on the soil?
A. Nutrients are released into the soil.
B.Soil erosion decreases
C.Carbon dioxide is absorbed by the soil.

D.Soil temperature decreases.

Answers

The first answer is w

When leaves fall from a tree and decompose on the soil it benefits the ecosystem as nutrients are released into the soil.

What is an ecosystem?

Ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.

Energy enters the system through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .Living organisms also influence the quantity of biomass present.By decomposition of dead plants and animals by microbes nutrients are released back in to the soil.

Learn more about ecosystem,here:

https://brainly.com/question/1673533

#SPJ6

What is my formula? Silver l acetate

Answers

Answer:

Ag(I)C2H3O2 ....................

Silver only has a single valence value (+1) so you really don't need to put the (I) in the chemical formula.

An increase in temperature will cause an increase in diffusion rate because Multiple Choice hot molecules get smaller and therefore diffuse faster. the frequency and force of molecular collisions decreases. hot water changes to a solid, so diffusion is easier. hot water is thinner than cold water. the frequency and force of molecular collisions increases.

Answers

Answer:

hot water is thinner than cold water.

Explanation:

The rate of diffusion of a substance has a lot to do with the temperature of a body.

Let us take water for instance, cold water has a greater density than hot water. As a result of this, the molecules in cold water are slower when in motion and more sluggish.

On the other hand, the molecules of hot water are quite faster since hot water has a lower density(thinner than cold water).

Thus, an  increase in temperature will cause an increase in diffusion rate because hot water is thinner than cold water.

How many moles are in 153 grams of O2?

Answers

Answer:

4.78 mol O2

Explanation:

Grams --> moles

Grams/molar mass = moles

153 g O2 / 32 g/mol O2 = 4.78125 (significant figures so round it up; the grams has 3 significant figures, so round it up) 4.78 mol O2

Qué uso le darías en la vida diaria ayuda

Answers

Answer:

ako po kailangan ko po nga ayuda

Explanation:

thanks for the points ❤️

Select the correct answer.
Your friend Keith has been in a dating relationship for six months. His personality has changed in these months. He looks unhappy and rarely smiles. He avoids the company of friends. On the rare occasions you have seen him, his face appears bruised. You suspect that Keith may be in an abusive relationship. What should you do in this case?
A.
avoid talking to Keith
B.
confront his dating partner
C.
encourage Keith to speak up and report abuse
D.
advise him to tolerate the abuse, as difficulties are a part of life

Answers

I think c cause if he is in a relationship that’s abusive he needs to speak up before it goes way worst.

A scientist wants to investigate several problems. In which of the following situations is using a simulation LEAST suitable for solving a problem?
a. When a scientific study requires performing a large number of trials that need to be conducted very quickly
b. When the solution to the problem requires real-world data inputs that are continually measured at regular intervals.
c. When performing an experiment that would be too costly or dangerous to conduct in the real world
d. When it is considered acceptable to make simplifying assumptions when modeling a real-world object or phenomenon

Answers

Answer:

A

Explanation:

got from another website

The simulation which is least suitable to scientists for solving a problem is when performing an experiment that would be too costly or dangerous to conduct in the real world.

What is scientific approach?

Scientific approach is an empirical method of acquiring knowledge and result. This method involved the careful observation of the problem, applying skepticism about the problem and giving cognitive assumptions also.

If a scientist wants to investigate several problems, then they will perform a large no. of trials at regular intervals to get the required result. But if performing of any experiment is dangerous to conduct in the real world then scientists will ignore to solve that problem.

Hence, option (C) is correct.

To know more about scientific approach, visit the below ink:

https://brainly.com/question/497944

what it meant by executive mention the function of Executive​

Answers

[tex]\huge{\textbf{\textsf{{\color{pink}{An}}{\red{sw}}{\orange{er}} {\color{yellow}{:⌐■-■}}}}}[/tex]

Definition:-

The organ of government that primarily looks after the function of implementation and administration is called the executive.

Function:-

Executive is the branch of government responsible for the implementation of laws and policies adopted by the legislature.

ThanksHope it helps.

Can someone please help me

Answers

Plants!

No doubt the answer is plants they are one maintaining the temperature, responsible for rains too...

How do new traits enter a population?

Answers

Answer: By the way that population is treated and also by new borns.

Explanation: new borns are given traits based off their parents but also new traits that are developed off of their own. Now if that population has access to resources and a lot of it. Chances are they will become bratty,selfish and things such as.

How many liters of chlorine are needed to produce 5.64 moles of aluminum chloride? Need help ASAP

Answers

Answer:

190 L

Explanation:

Given that:

Number of moles = mass/molar mass

number of moles = 5.64

molar mass of aluminum chloride = 133.34 g/mol

The balanced equation is:

2 Al + 3 Cl2 --> 2AlCl3.

From above reaction:

5.64 mole of  AlCl3 reacts with 3 mole Cl2  to give 2 mole AlCl3

i.e

[tex](5.64 \ mole \ AlCl3) \times (3 \ mole \ Cl2 \ / \ 2 \ mole \ AlCl3)[/tex]

= 8.46 mole Cl2 gas.

At Standard temperature and pressure:

= (22.4 L/1 mole gas) * (8.46 mole Cl2)

= 190 L chlorine gas

IT due tomorrow Giving Brianliest!!!!!
This is not a eassy!!!!!

Answers

I’m sorry but I cannot see the picture

Determine the number of moles in 1.5 x 10^25
atoms of iron.

Answers

It should be 20 moles of iron

Suppose that you must go into court and testify as to the level of X in the river water. Your lawyer is concerned that your analytical results are lower than they should be because you cannot extract with benzene (distribution Ratio K=4) all of X from your samples. Assume the concentration of X in the 1.00 L river water sample is 1.06 x 10-4 M.
a. How many extracts would be required to remove all but 1000 molecules of X from the sample with repeated 10.00 mL portions of extract?
b. How many extractions are required for a 99.99% chance of extraction of the last molecule remaining (0.01% chance of a single molecule left behind)

Answers

Answer:

The appropriate solution is:

(a) n ≈ 900

(b) n ≈ 1165

Explanation:

According to the question,

(a)

The final number of molecules throughout water will be:

= [tex](\frac{1000}{1000}\times 4\times 10 )^n[/tex]

where, n = number of extractions

Now,

The initial number of molecules will be:

= [tex]1.06\times 10^{-4}\times 6.023\times 10^{23}[/tex]

= [tex]6.387\times 10^{19}[/tex]

Final number of molecule,

⇒ [tex]1.566\times 10^{-16}=(\frac{1000}{1040} )^n[/tex]

                       [tex]n \approx 900[/tex]

(b)

Final molecules of X = left (0.01%)

hence,

⇒ [tex]initial = 6.384\times 10^{19}[/tex]

   [tex]\frac{1}{6.384\times 10^{19}} =(\frac{1000}{1040} )^2[/tex]

                 [tex]n \approx 1165[/tex]

                       

What is the Molar mass of zinc

Answers

Answer:

65.38 u

Explanation:

hope this helps you out!!!!!!!

They Mean D and not U H just took the test and its D i hope this help

Which of the following lists contain ONLY metals?

Answers

Answer:

I'd there and pictures?? can put the list

i think its D but i not sure so can yall pls help me

Answers

Answer:

I'm not really sure but I thinks its

A:veuns

A sample was then prepared containing 14.00 mL of coffee and 8.00 mL of 4.80 ppm Li , and diluted to a 50.00 mL total volume. The ratio of the internal standard signal to the analyte signal in the unknown sample was found to be 0.840/1.000 (Li signal/Na signal). Determine the unknown concentration of Na in the coffee sample.

Answers

Answer:

The right answer is "[tex][Na^+]=5.57 \ ppm[/tex]".

Explanation:

The given values are:

[tex]\frac{A_s}{A_{coffee}} =\frac{0.840}{1.000}[/tex]

According to the question,

The concentration of standard will be:

=  [tex]\frac{7.80}{50.00}\times 4.80[/tex]

=  [tex]0.156\times 4.80[/tex]

=  [tex]0.748 \ ppm[/tex]

Coffee after dilution,

⇒  [tex]\frac{A_{coffee}}{C_{coffee}} =F\times \frac{A_s}{C_s}[/tex]

or,

⇒  [tex]C_{coffee}=\frac{A_{coffee}}{A_s}\times \frac{C_s}{F}[/tex]

On substituting the values, we get

⇒               [tex]=\frac{1.000}{0.840}\times \frac{0.748}{1.68}[/tex]

⇒               [tex]=1.191\times 1.3104[/tex]

⇒               [tex]=1.561 \ ppm[/tex]

hence,

In unknown sample, the concentration of coffee will be:

=  [tex]1.561\times \frac{50}{14}[/tex]

=  [tex]\frac{78.05}{14}[/tex]

=  [tex]5.57 \ ppm[/tex]

Which example is the site of oxidation when the dry cell is operating?

solid zinc layer


cardboard separator


graphite rod


paste

Answers

A dry cell is one type of electric battery which is generally used for the home and portable electronic devices. A battery is a device which consists of one or more electrochemical cells. The site of oxidation occurs in solid zinc layer. The correct option is A.

What is a dry cell?

A dry cell is defined as an electrochemical cell which consists of low moisture immobilized electrolytes in the form of a paste which restricts it from flowing. It is developed by the German scientist Carl Gassner which converts chemical energy into electrical energy.

A dry cell consists of a metal container in which a low moisture electrolyte paste covers the graphite rod or a metal electrode. Generally, the metal container will be zinc whose base perform as the negative electrode (anode).

For a dry cell battery to operate, oxidation  will occur from the zinc anode and reduction will take place in the cathode.

Thus the correct option is A.

To know more about dry cell, visit;

https://brainly.com/question/13780178

#SPJ2

What is the H+ concentration of a substance with a pH of 5?

Answers

Answer:

- log{H+ }= - log {5}= -0.6990

The ΔHfus for ethanol is 4.60 kJ/mol. If it takes 7500.0 Joules of energy to melt a sample of ethanol, how many grams of ethanol are in the sample? The chemical formula for ethanol is C2H5OH.

Answers

Answer:

Explanation:

Other Questions
Last year a student correctly answered 4/5 of the total 40 questions given.What percent of the total questions she correctly answered? anyone want to write me a 2 minute persuasive speech? to address an issue, correct an injustice or make someone do what you want. Julius is going to have a meal with an appetizer and an entre.There are 3 choices for the appetizer and 4 choices for the entre.How many different meals does he have to choose from? La historia tiene sus orgenes ena. marco polob. herodotoc. Aristoteles cuales son las caractersticas de un hecho noticioso? RESPONDAn PORFAAAAA u just gotta find the area What did Ida B. Wells do to improve family life? Part BIn stanza V, the speaker states that he won't be reconstructed. What does he mean by that? How do you know? PLS HELP, WILL GIVE BRAINLIEST AND POINTSSSSSSi'm rlly confused on this, I think maybe it's .D???Pls someone answer and explain!!!and no links, please and thankyou In what ways did the media contribute to affecting social and political change in the UnitedStates? *A. Journalists exposed the poor conditions of meat packing industries and livingareasO B. They donated money to build settlement housesC. They printed posters and articles about the need for Women's suffrageD. They formed political parties to advocate reform goals in Congress Oligomycin A is an antibiotic that works by blocking a proton (H ) channel in ATP synthase, inhibiting the action of the enzyme. The primary effect of this antibiotic is: Group of answer choices decreased ATP synthesis due to a decreased hydrogen ion gradient across the inner mitochondrial membrane. increased ATP synthesis due to an increased hydrogen ion gradient across the inner mitochondrial membrane. decreased ATP synthesis due to the inhibition of oxidative phosphorylation of ADP. increased ATP synthesis due to the promotion of oxidative phosphorylation of ADP. Which words best fill in the blank indicate a shift in setting? GIVING BRAINIEST!!!!! What are the ways Muslims worship? Sara can travel 23 feet in 11 hours. Please calculate Sara's rate of speed. (round to 2 decimal places) If you can answer this u are the best which answer is correct someone please help!! will reward brainliest PLEASE HELP ASAP WILL MARK BRAINLIEST