The definition of bases and acids by Bronsted-Lowry is quite straightforward. Proton acceptors include bases and acids, respectively. Water donates a proton in the ammonia-in-water example, resulting in NH3 + H2 O NH4 + + OH-, making water the acid. Hence (c) is the correct option.
Ammonia serves as the base since it receives the proton.As it donates a proton to the ammonia base, forming the ammonium ion and hydroxide ion, water acts as a bronsted acid in the following equation. Ammonium and hydroxide ions are the byproducts that are produced. A Bronsted-Lowry base is represented by the ammonia, whilst the water serves as the model's acid.
To know more about Bronsted-Lowry, click here:
https://brainly.com/question/14407412
#SPJ4
when 4-chloro-1-butanol is placed in sodium hydride, a cyclization reaction occurs.
Assuming that the octet rule is not violated, draw the Lewis dot structure of FClO3 where there is an F-Cl bond. Chlorine has a formal charge of ____ in FClO3.
A. +7
B. +4
C. +3
D. 0
E. -3
The Lewis dot structure of FClO3 where there is an F-Cl bond is:
F
|
Cl--O--O
|
O
Chlorine has a formal charge of C) +3 in FClO3.
The Lewis dot structure shows the arrangement of atoms and valence electrons in a molecule.
To draw the Lewis dot structure of FClO3, we need to first determine the total number of valence electrons in the molecule. Fluorine (F) has 7 valence electrons, chlorine (Cl) has 7, and oxygen (O) has 6. We also need to add 1 for the negative charge on the ion, giving a total of 32 valence electrons.
Next, we arrange the atoms in the molecule, with the central atom being the least electronegative. In this case, chlorine is the central atom, and it is bonded to one fluorine atom and three oxygen atoms. The F-Cl bond is a single bond, represented by a line between the F and Cl atoms.
We then place the remaining valence electrons around each atom, in pairs, until each atom has a full octet of electrons (except for hydrogen, which has only two electrons). The remaining valence electrons are placed on the central atom.
After drawing the Lewis dot structure, we can calculate the formal charge on each atom to ensure that it is as close to zero as possible.
The formal charge of an atom is the difference between the number of valence electrons on the free atom and the number of electrons assigned to the atom in the Lewis structure. In this case, chlorine has 6 valence electrons (7 minus 1 because of the bond with fluorine), and 3 lone pairs (6 electrons) for a total of 9 electrons.
Thus, its formal charge is +7 - 9 = -2. However, oxygen atoms have a higher electronegativity than chlorine, so we redistribute the electrons from the oxygen atoms to chlorine. Chlorine now has 5 lone pairs (10 electrons) and a formal charge of +3 (7 - 10). All the other atoms have a formal charge of zero.Chlorine has a formal charge of C) +3 in FClO3.
For more questions like Electron click the link below:
https://brainly.com/question/1255220
#SPJ11
1) Given data from your instructor, provide the calculation of the theoretical yield of the lactone product. Prove which reagent or starting material is the limiting reagent. (Br2 MW 159.81, d25 °C = 3.1028 mg/mL ; C9H8O3 MW 164.16 ; C9H9BrO4 261.07)2) Given data from your instructor, calculate the isolated percent yield of δ-bromo-γ-lactone product (C9H9BrO4 ). Mass of product ____________ mg. (b) What is the melting point (mp) range of your product? _______–_______ °C (Lit. 110–115 °C) What does this melting point range mean to you?
Mass of product 996.8972 mg. What is the melting point (mp) range of your product 110–115 °C.
To calculate the theoretical yield of the lactone product, we need to determine the limiting reagent first. We can do this by calculating the number of moles of each reagent present and comparing the ratios of the moles to the stoichiometric ratio of the reaction.
The balanced chemical equation for the reaction is:
C₂H₈O₃ + Br₂ → C₉H₉BrO4
From the equation, we can see that the stoichiometric ratio of C₂H₈O₃ to Br₂ is 1:1. Therefore, we need to calculate the number of moles of each reagent present in the reaction mixture and compare them.
Br₂ MW 159.81, d25 °C = 3.1028 mg/mL
C₂H₈O MW 164.16
C₉H₉BrO₄ 261.07
Assuming we have 1 mL of the reaction mixture, we can calculate the number of moles of Br2 present:
3.1028 mg/mL x 1 mL x (1 g / 1000 mg) x (1 mol / 159.81 g) = 1.940 x 10^-5 mol Br2
We can also calculate the number of moles of C₉H₈O₃ present:
Mass of C₉H₈O₃ = (1 g/mL) x 1 mL - (3.1028 mg/mL) x 1 mL = 996.8972 mg
Number of moles of C₉H₈O₃ = 996.8972 mg x (1 g / 1000 mg) x (1 mol / 164.16 g) = 6.072 x 10^-3 mol C₉H₈O₃
Since the stoichiometric ratio of C₉H₈O₃ to Br2 is 1:1, we can see that C₉H₈O₃ is present in excess, and Br₂ is the limiting reagent.
To calculate the theoretical yield of the lactone product, we can use the number of moles of Br₂ as the limiting reagent:
Number of moles of C₉H₉BrO₄ = 1.940 x 10^-5 mol Br₂ x (1 mol / 1 mol Br₂) x (1 mol C₉H₉BrO₄ / 1 mol) = 1.940 x 10^-5 mol C₉H₉BrO₄
Mass of C₉H₉BrO₄ = 1.940 x 10^-5 mol C₉H₉BrO₄ x 261.07 g/mol = 5.06 mg
Therefore, the theoretical yield of the lactone product is 5.06 mg.
To calculate the percent yield of the product, we need to know the mass of the isolated product. Let's assume that the mass of the isolated product is 4.5 mg.
Percent yield = (mass of isolated product / theoretical yield) x 100%
Percent yield = (4.5 mg / 5.06 mg) x 100% = 89%
The melting point range of the product is 110–115 °C (Lit.). This means that the melting point of the product should fall within this range if it is pure. However, the melting point range alone is not enough to determine the purity of the product. Other characterization methods, such as spectroscopic analysis, should also be used to confirm the identity and purity of the product.
Know more about moles here: https://brainly.com/question/31597231
#SPJ4
4. Some plants have seeds which contain vegetable oil. (a) Describe how the oil can be obtained from the seeds. (3marks
The oil from the seeds can be obtained by crushing, grinding, or rolling and then doing mechanical pressing to liberate oil from the seeds.
Most of the plants have seeds and they are a source of vegetable oils that can be used for cooking, medicinal purposes, and other self-care purposes. Oil can be extracted from the seeds by following a vigorous mechanical procedure.
The seeds are crushed to separate the oil, then mixed with a solvent like water or hexane. Then the oil floats on the liquid and is separated from the mixture. The cold-pressed oils are so pure.
Some of the important vegetable seed oils are coconut oil, almond oil, hazel-nut oil, hemp seed oil etc. All these oils are used on a daily basis for various requirements.
To know more about Vegetable oils, click on:https://brainly.com/question/16788604
Calculate the van der waals interactions in lowest order between two hydro-gen atoms in n=2 states. interpret the results.
In the case of hydrogen atoms van der waals interactions in n=2 states, C6 can be calculated as C6 = (3/2) * h * c * α².
To calculate the van der Waals interactions between two hydrogen atoms in n=2 states, you can use the London dispersion formula, which is given by:
U(r) = -C6/r⁶
Here, U(r) is the van der Waals potential energy, r is the distance between the two atoms, and C6 is the dispersion coefficient.
where h is the Planck's constant, c is the speed of light, and α is the static polarizability of hydrogen in the n=2 state.
Now, to interpret the results, the van der Waals interactions are attractive and depend on the distance between the atoms. At large distances, the interactions become weaker, while at short distances, they become stronger.
These interactions play a significant role in stabilizing molecular structures, particularly in non-polar and weakly polar molecules.
To know more about van der waals interactions click on below link:
https://brainly.com/question/5541979#
#SPJ11
A weather map with lines connecting points of equal pressure.
Choose the answers from the drop-down menus.
What type of isoline is indicated on this weather map?
In what pressure region is a high-pressure area located?
What type of weather would likely be found in this area?
The isoline indicated on this weather map is an isobar.
The high-pressure area is located in a region of relatively high pressure.
In a high-pressure area, the weather is typically fair and dry, with clear skies and little or no precipitation.
High-pressure systems are associated with sinking air, which tends to suppress cloud formation and precipitation. The sinking air also leads to increased atmospheric stability, which further inhibits cloud formation and precipitation. An isobar is a line connecting points of equal atmospheric pressure on a weather map.
In a high-pressure area, the atmospheric pressure is relatively high compared to the surrounding areas, and the isobars are closely spaced together. This indicates a steep pressure gradient and strong pressure gradient force. The clockwise rotation of air around a high-pressure area in the Northern Hemisphere also leads to the formation of clear skies and dry weather conditions. The sinking air associated with the high-pressure system suppresses cloud formation and precipitation, resulting in sunny and dry weather conditions.
To know more about the Weather map, here
https://brainly.com/question/30260238
#SPJ1
Answer:
1. Isobar
2. 1024 mb
3. sunny weather
Explanation:
I did it on edge
name four physical quantities that are conserved and two quantities that are not conserved during a process
Four physical quantities that are conserved during a process include energy, momentum, angular momentum, and electric charge. On the other hand, two quantities that are not conserved during a process are mechanical energy and mass.
Energy conservation states that the total energy of an isolated system remains constant, as energy can neither be created nor destroyed, only converted from one form to another. Momentum conservation asserts that the total momentum of a system remains constant, provided no external forces act on it. Similarly, the conservation of angular momentum dictates that the total angular momentum of an isolated system remains constant if no external torques are applied. Lastly, electric charge conservation states that the net electric charge within an isolated system remains constant, as charges can neither be created nor destroyed, only redistributed or transferred.
Mechanical energy, which comprises kinetic and potential energy, may not be conserved in non-conservative systems, such as those experiencing dissipative forces like friction or air resistance. In these cases, some mechanical energy is lost as thermal energy or other forms of energy. Mass conservation is not always maintained at the subatomic level, particularly during processes like nuclear reactions, where mass can be converted into energy following Einstein's mass-energy equivalence principle, E=mc².
Learn more about mechanical energy at:
https://brainly.com/question/28928306
#SPJ11
write the electron configuration for the precious metal platinum (pt), abbreviating with the appropriate noble-gas inner core.'
The electron configuration for platinum (Pt) can be abbreviated using the noble-gas inner core of xenon (Xe) as [Xe] 4f^14 5d^9 6s^1.
How to write the Electron Configuration of an element?
To write the electron configuration for the precious metal platinum (Pt), follow these steps:
1. Identify the atomic number of platinum, which is 78.
2. Find the nearest noble gas with an atomic number less than platinum. In this case, it's Xenon (Xe) with an atomic number of 54.
3. Write the electron configuration for Xenon as [Xe].
4. Continue filling the remaining electron orbitals following the Aufbau principle.
To know more about Electron Configuration:
https://brainly.com/question/9508055
#SPJ11
rank the members of each compound in order of increasing ionic character of their bonds: ncl3, ni3, nf3.
According to decreasing polarity, the order of the molecules in each set is as follows: PF₃ > PCl > PBr, BF > CF > NF, Te > Se > BrF₃, and so on. The bond's ionic nature (polarity) increases as the electronegativity difference between the atoms increases.
The degree of electronegativity gap between the atoms affects how polar covalent bonds are. The bonds' polarity increases as the difference in electronegativity between the atoms increases. Since fluorine is more electronegative than hydrogen, its p character would be higher in the N-F bond than in the N-H bond. More character also results in wide bond angles. As a result, the bond angle in NH₃ is higher than in NF₃.
To know more about polarity, click here:
https://brainly.com/question/30002497
#SPJ4
Rank the members of each set of compounds according to the ionic character of their bonds. Most ionic bonds?a) PCl3 PBr3 PF3 Most ionic bonds? b) BF3 NF3 CF3 Most ionic bonds? c) SeF4 TeF4 BrF3 Least ionic bonds? d) PCl3 PBr3 PF3 Least ionic bonds?e) BF3 NF3 CF3 Least ionic bonds? f) SeF4 TeF4 BrF3
calculate the energy change (δe) for the decomposition of hydrogen peroxide: 2 h2o2(g) → 2 h2o(g) o2(g) given these bond energies of the reactants and products.
The energy change (δe) for the decomposition of hydrogen peroxide: 2 H₂O(g) → 2 H₂O(g) ⁺ O₂(g) is 794 kJ/mol.
To calculate the energy change (δe) for the decomposition of hydrogen peroxide, we first need to calculate the energy required to break the bonds in the reactants and the energy released when the bonds in the products form.
Here are the bond energies of the reactants and products:
H-O: 463 kJ/mol O-O: 498 kJ/molTo break the bonds in the reactants, we need to break four H-O bonds and one O-O bond, so the total energy required to break the bonds in the reactants is:
4(H-O) + 1(O-O)
= 4(463 kJ/mol) + 498 kJ/mol
= 2218 kJ/mol
To form the bonds in the products, we need to form two H-O bonds and one O=O bond, so the total energy released when the bonds in the products form is:
2(H-O) + 1(O=O)
= 2(463 kJ/mol) + 498 kJ/mol
= 1424 kJ/mol
Therefore, the energy change (δe) for the decomposition of hydrogen peroxide is:
δe = energy required to break bonds in reactants - energy released when bonds in products form
δe = 2218 kJ/mol - 1424 kJ/mol
δe = 794 kJ/mol
So the energy change for the decomposition of hydrogen peroxide is 794 kJ/mol.
Learn more about decomposition of hydrogen peroxide: https://brainly.com/question/18221920
#SPJ11
What is the pH when 1.00 mL of 1.00 M HCl is added to: a) 1.00 L of pure water (before HCI, PH - 7.00) b) 1.00 L of buffer that has [HOAc) = 0.700 M and [OAc] =0.600 M (pH 4.68) K = 1.8x10$ for HOA
The pH when 1.00 mL of 1.00 M HCl is added to:
a) Pure water is approximately 3.00, and
b) A buffer with [HOAc] = 0.700 M and [OAc-] = 0.600 M (pH 4.68) is approximately 4.65.
a) When 1.00 mL of 1.00 M HCl is added to 1.00 L of pure water, the HCl dissociates completely, providing 0.001 moles of H+. Since the total volume is 1.001 L, the H+ concentration becomes (0.001 moles / 1.001 L) ≈ 0.001 M. The pH is calculated as -log(0.001) ≈ 3.00.
b) For the buffer, use the Henderson-Hasselbalch equation: pH = pKa + log([A-]/[HA]). The pKa is -log(K) = -log(1.8x10⁻⁴) ≈ 3.74.
Adding 0.001 moles of HCl to the buffer will react with the OAc- ions, reducing [OAc-] by 0.001 moles and increasing [HOAc] by 0.001 moles. The new concentrations are [HOAc] = 0.701 M and [OAc-] = 0.599 M. The new pH is 3.74 + log(0.599/0.701) ≈ 4.65.
To know more about Henderson-Hasselbalch equation click on below link:
https://brainly.com/question/13423434#
#SPJ11
From the balanced equation, what is the molar ratio of Al and alum in the reaction? 2 Al(s) + 2 KOH(aq) + 22 H20(1) + 4H2SO4 → 2 [KAI(SO4)2.12 H2O(s)] + 3H2(g)
The molar ratio of Al to alum in this reaction is 1:1.
From the balanced equation, the molar ratio of Al and alum in the reaction is as follows:
2 Al(s) + 2 KOH(aq) + 22 H2O(l) + 4H2SO4 → 2 [KAl(SO4)2·12 H2O(s)] + 3H2(g)
In this balanced equation, 2 moles of Al react to form 2 moles of alum ([KAl(SO4)2·12 H2O]). Therefore, the molar ratio of Al to alum is:
2 moles Al : 2 moles alum
To simplify the ratio, divide both sides by 2:
1 mole Al : 1 mole alum
So, the molar ratio of Al to alum in this reaction is 1:1.
Learn more about molar ratio or mole ratio : https://brainly.com/question/30632038
#SPJ11
Determine the moles of benzoic acid, C.H.CO,H, actually produced in the experiment 21.28 Reactant mass Product mass 18.28 (To avoid introducing rounding errors on intermediate calculations, enter your answer to four significant figures.) Moles of benzoic acid actually produced Molar mass c Molar mass H 12 g/mol 1 g'mol mol Molar mass o 16 g/mol Show/Hide Help Reactant moles 0.1963 mol Max moles of product 0.1963 mol
The moles of benzoic acid (C6H5COOH) actually produced in the experiment is 0.1498 mol.
To determine the moles of benzoic acid produced, we need to first find the molar mass of benzoic acid.
Molar mass of C = 12 g/mol
Molar mass of H = 1 g/mol
Molar mass of O = 16 g/mol
From the chemical formula of benzoic acid, we can see that it contains 7 carbon atoms, 6 hydrogen atoms, and 2 oxygen atoms. Molar mass is the sum of the molar masses of its constituent atoms. Therefore, its molar mass is:
(7 * 12 g/mol) + (6 * 1 g/mol) + (2 * 16 g/mol) = 84 + 6 + 32 = 122 g/mol
Given that the product mass is 18.28 g, we can now calculate the moles of benzoic acid produced:
Moles of benzoic acid = Product mass / Molar mass = 18.28 g / 122 g/mol = 0.1498 mol
So, 0.1498 moles of benzoic acid were actually produced in the experiment.
Learn more about Molar mass: https://brainly.com/question/837939
#SPJ11
Suppose you made two batches of Aspirin, batch A and batch B. Coincidentally they are of the same weight ( 5.00 g)
You grabbed 0.10 g sample from batch A, and 0.10 g sample from batch B, and prepared the solution for determining purity following the procedures noted on the lab handout (i.e. dissolved the sample and made a solution. Transferred some solution into a volumetric flask and added Fe(NO3)3). Luckily, the absorbance of the final solution of both samples falls within the range of the salicylic acid standard solutions.
Final solution of samples from batch A gives you an absorbance of 0.4 at λmax, while final solution of samples from batch B gives you an absorbance of 0.6 at the same wavelength.
Now, what can you tell of the purity of the two batches?
In this case, absorbance of final solution of batch B is higher than that of batch A. This means that batch B contains a higher concentration of salicylic acid than batch A, indicating that batch A is purer than batch B. Purity can be determined by comparing the absorbance of final solutions.
The purity of a substance can be determined by comparing the absorbance of its final solution to that of a standard solution of the same substance.
In this case, since the absorbance of both samples falls within the range of the salicylic acid standard solutions, we can conclude that both batches contain salicylic acid.
However, the difference in absorbance between the two samples indicates that there is a difference in the concentration of salicylic acid in each batch.
It is important to note that the purity of a substance cannot be determined solely by its weight, as other impurities may be present in the sample. Therefore, using a spectrophotometer to measure absorbance can be a useful tool for determining the purity of a substance.
Know more about spectrophotometer here:
https://brainly.com/question/30724865
#SPJ11
What happens when a can of soda is moved from room temperature into a fridge? a. The solubility of carbon dioxide inside the beverage will increase. b. Less carbon dioxide will dissolve into the beverage. c. The solubility of carbon dioxide inside the beverage will decrease. d. The gas pressure inside the can increases.
Option A. When a can of soda is moved from room temperature into a fridge, the solubility of carbon dioxide inside the beverage will increase.
When a can of soda is moved from room temperature into a fridge, the solubility of carbon dioxide inside the beverage will increase. This is because cooler temperatures generally increase the solubility of gases in liquids, allowing more carbon dioxide to dissolve into the beverage.
When you put your Soda can or bottle of Soda into the fridge, it will go flat faster than if you had left it out on the counter. This is because cold temperatures cause carbonation to escape more quickly from a beverage. This can happen when there are small holes in the bottom of an aluminum container.
Know more about solubility - brainly.com/question/9098308
#SPJ11
. calculate the poh and the ph of the following aqueous solutions at 25⁰c: (a) 1.25 m lioh
To calculate the pOH and pH of a 1.25 M LiOH solution at 25°C, we need to use the following equations:
pOH = -log[OH-]
pH + pOH = 14
First, we need to find the concentration of hydroxide ions [OH-] in the solution.
LiOH is a strong base, meaning it completely dissociates in water to form Li+ and OH- ions:
LiOH → Li+ + OH-
So, the concentration of [OH-] in a 1.25 M LiOH solution is also 1.25 M.
Using the pOH equation, we can calculate:
pOH = -log (1.25)
= 0.9031
Next, we can use the pH equation to find pH:
pH + pOH = 14
pH + 0.9031 = 14
pH = 13.0969
Therefore, the pOH of a 1.25 M LiOH solution at 25°C is 0.9031, and the pH is 13.0969.
https://brainly.com/question/31485772
#SPJ11
draw and label detailed apparatus of the steam distillation apparatus used for the isolation of eugenol experiment.
1.03 g of ground cloves and 17 mL of distilled water were added to the completed device shown in the sketch below. Clove oil is called eugenol. Its boiling point is 248 degrees Celsius.
The oil present in cloves, eugenol, has a boiling point of 248 °C; however, by performing a co-distillation with water, sometimes referred to as a steam distillation, it can be isolated at a lower temperature.The distillation apparatus, often known as a "still," is made up of a container for the plant material and water, a condenser to cool and condense the created vapour, and a receiving mechanism. The required plant material for extraction is submerged in water in the distillation tank.
To know more about eugenol, click here:
https://brainly.com/question/29756034
#SPJ4
What is the pressure of 0.60 moles of a gas if it's volume is 10.0 liters at 35.0c?
Answer:
Pressure= 1.52atm
Explanation:
Using; PV = nRT
P (Pressure) = ?
V (Volume) = 10litres = 10dm³
n (Number of moles) = 0.6 mol
R (Universal Gas Constant) = 0.082
T (Absolute Temperature) = 35 + 273 = 308K.
P × 10 = 0.6 × 0.082 × 308
P = 15.1546 ÷ 10
P = 1.52atm
What is the ph if you add 30. ml of 0.10 m naoh to 50.ml of 0.10 m ch3cooh?
The pH of the solution formed by adding 30 mL of 0.10 M NaOH to 50 mL of 0.10 M CH₃COOH is 9.61.
First, we need to determine the number of moles of CH₃COOH and NaOH in the solution.
moles of CH₃COOH = 0.050 L × 0.10 mol/L = 0.005 mol
moles of NaOH = 0.030 L × 0.10 mol/L = 0.003 mol
Next, we need to determine which species is the limiting reagent. Since NaOH reacts with CH₃COOH in a 1:1 ratio, and there are fewer moles of NaOH than CH₃COOH, NaOH is the limiting reagent.
The reaction between NaOH and CH₃COOH produces NaCH₃COO and H₂O. The NaCH₃COO is a salt that is completely dissociated in water, so we can ignore it for pH calculations.
The reaction also produces H₃O⁺ ions, which will determine the pH of the solution.
Since NaOH is a strong base, it completely dissociates in water to produce OH⁻ ions. We can use the equation for the reaction between NaOH and H₂O to determine the concentration of OH⁻ ions in the solution:
NaOH + H₂O → Na⁺ + OH⁻ + H₂O
[OH⁻] = [NaOH] = 0.003 mol / (0.050 L + 0.030 L) = 0.03 M
Now we need to determine the concentration of CH₃COOH that remains unreacted. Since CH₃COOH is a weak acid, it only partially dissociates in water. We can use the expression for the equilibrium constant for the dissociation of acetic acid to determine the concentration of H₃O⁺ ions in the solution:
K_a = [CH₃COO⁻][H₃O⁺] / [CH₃COOH]
Assuming that the concentration of CH₃COOH that remains unreacted is x:
K_a = (0.005 - x)(x) / (0.005 + x)
Solving for x using the quadratic formula gives:
x = 0.00182 mol
Therefore, the concentration of H₃O⁺ ions in the solution is:
[H₃O⁺] = K_a / [CH₃COOH] = (1.8 × 10⁻⁵) .
learn more about equilibrium here:
https://brainly.com/question/30807709
#SPJ11
Pre lab questions: 1. What is the purpose of using Newman projections? 2. How many different conformations of cyclohexane are possible? 3. What is the normal bond angle for a tetrahedral? (if you are uncertain, look it up in your text book or on the internet to give a correct response). 4. Do you have your own modeling kit for this class? If yes did you bring it with you today? If you answered no to the first question are you going to purchase one after today?
1. Newman projections are used to visualize and analyze the spatial arrangement of atoms and their conformations in a molecule, specifically to represent the different rotational conformations of a single bond.
2. There are two main conformations of cyclohexane: the chair conformation and the boat conformation. However, there are additional conformations, such as twist-boat and half-chair, resulting in a total of four possible conformations.
3. The normal bond angle for a tetrahedral is approximately 109.5 degrees.
4. I do not have a modeling kit. Yes, I am going to purchase one after today to better understand the structures and conformations of molecules in the studies.
https://brainly.com/question/31485794
#SPJ11
Which one of the following molecules has dipole-dipole interactions in the liquid phase? Ο Ο Ο Ο Ο O PF3 O XeF2 GeF OPCIS OBF
PF3 is the molecule that has dipole-dipole interactions in the liquid phase
Dipole-dipole "interactions" occur between polar molecules with dipoles, where the positive pole of one molecule is attracted to the negative pole of another molecule. In a "liquid" phase, molecules have enough energy to overcome some of their intermolecular forces, but not all.
1. PF3:
This molecule is polar because the fluorine atoms are more electronegative than the phosphorus atom, creating a net dipole moment.
2. XeF2:
This molecule is nonpolar due to its linear geometry, which causes the dipole moments of the two fluorine atoms to cancel each other out.
3. GeF:
This is an incomplete molecular formula, so it cannot be evaluated.
4. OPClS:
This is also an incomplete molecular formula, so it cannot be evaluated.
5. OBF:
This is another incomplete molecular formula, so it cannot be evaluated.
For more information on dipole dipole interactions in Liquid phase refer https://brainly.com/question/11828970
#SPJ11
In a 15.00L container, the compouind SbCl5 (g) decomposed to gaseous antimony trichloride, SbCl3(g), and chlorine gas, Cl2 (g) . At this temperature, the equilibrium concentrations are:
[SbCl5] = 0.0293
[SbCl3] = [Cl2] = 0.00794 M
Determine the number of moles of chlorine gas that must be added to the container to make the new equilibrium concentration of SbCl3 (g) to be half that of the original equilibrium concentration. Do not round immediate calculations.
we need to use the balanced chemical equation for the decomposition of SbCl5: Therefore, you need to add 0.05955 moles of chlorine gas to the 15.00L container to make the new equilibrium concentration of SbCl3 (g) half that of the original equilibrium concentration.
SbCl5 (g) ⇌ SbCl3 (g) + Cl2 (g)
equilibrium concentrations given are:
[SbCl5] = 0.0293 M
[SbCl3] = [Cl2] = 0.00794 M
We want to find the number of moles of Cl2 that must be added to the container to make the new equilibrium concentration of SbCl3 to be half that of the original equilibrium concentration.
Let's call the new equilibrium concentration of SbCl3 "x" M. Since the volume of the container is constant at 15.00 L, we can use the equilibrium expression to set up an equation and solve for x:
Kc = [SbCl3][Cl2]/[SbCl5]
Kc = (0.00794)(0.00794)/(0.0293) = 0.001706 M
0.001706 = x(0.00794-x)/(0.0293+x)
Simplifying this equation and solving for x, we get:
x = 0.002296 M
This is half of the original equilibrium concentration of SbCl3, which was 0.00794 M. So, we need to add enough Cl2 to increase the concentration from 0.00794 M to 0.002296 M.
The change in concentration of Cl2 is:
Δ[Cl2] = x - [Cl2] = 0.002296 - 0.00794 = -0.005644 M
This means we need to remove 0.005644 M of Cl2 from the container. Since the volume of the container is 15.00 L, we can use the equation:
moles = concentration × volume
to calculate the number of moles of Cl2 that must be removed:
moles of Cl2 = (0.005644 M) × (15.00 L) = 0.08466 moles
Therefore, we need to remove 0.08466 moles of Cl2 from the container to reach the new equilibrium concentration of SbCl3.
To determine the number of moles of chlorine gas that must be added to the 15.00L container to make the new equilibrium concentration of SbCl3 (g) half that of the original equilibrium concentration, follow these steps:
1. Write the balanced equation for the reaction:
SbCl5 (g) ⇌ SbCl3 (g) + Cl2 (g)
2. Given the original equilibrium concentrations:
[SbCl5] = 0.0293 M
[SbCl3] = [Cl2] = 0.00794 M
3. The new equilibrium concentration of SbCl3 (g) should be half the original:
[SbCl3_new] = 0.5 * 0.00794 M = 0.00397 M
4. Since the stoichiometry of SbCl3 and Cl2 in the balanced equation is 1:1, the change in the concentration of Cl2 must be equal to the change in the concentration of SbCl3:
Δ[Cl2] = 0.00397 M
5. Calculate the number of moles of Cl2 to be added to the container:
moles of Cl2 = Δ[Cl2] * volume of container
moles of Cl2 = 0.00397 M * 15.00 L = 0.05955 moles
Therefore, you need to add 0.05955 moles of chlorine gas to the 15.00L container to make the new equilibrium concentration of SbCl3 (g) half that of the original equilibrium concentration.
Visit here to know more about decomposition:
brainly.com/question/8009068
#SPJ11
In a titration, 15.65 milliliters of a KOH(aq) solution exactly neutralized 10.00 milliliters of a 1.22 M HCl(aq) solution.
Complete the equation below for the titration reaction by correctly identifying the formula of each product.
HCl(aq) + KOH(aq) →. +
1) HCl(aq) + KOH(aq) - KOCI + H₂
2) HCl(aq) + KOH(aq) → CIO + H₂K
3) HCl(aq) + KOH(aq) H₂CI+ OK
4) HCl(aq) + KOH(aq) + H₂O + KCI
The balanced equation for the neutralization reaction between hydrochloric acid (HCl) and potassium hydroxide (KOH) is:
4. HCl(aq) + KOH(aq) → KCl(aq) + H2O(l)What is neutralization reactionA neutralization reaction is a chemical reaction between an acid and a base that results in the formation of a salt and water.
In this type of reaction, the H+ ions from the acid react with the OH- ions from the base to form water, while the remaining ions from the acid and base combine to form a salt.
The general equation for a neutralization reaction is:
acid + base → salt + water
The reaction between HCl and KOH produces potassium chloride (KCl) and water (H2O).
Learn more about titration at
https://brainly.com/question/13307013
#SPJ1
Explain why β sheets are less likely to form than α helices during the earliest stages of protein folding.
In the early phases of protein folding, sheets are less likely to form than helices because sheets need the alignment of several polypeptide chains.
The polypeptide chain starts to fold into its natural conformation during the first stages of protein folding. Because it includes hydrogen bonding between neighbouring residues along a single polypeptide chain, the creation of helices is advantageous. In contrast, the formation of the distinctive hydrogen-bonded sheet structure in sheets necessitates the alignment of many polypeptide chains in a certain orientation. Because it requires numerous chains to join together in a certain orientation, whereas helices can form from a single chain, this alignment is less likely to happen by accident. Therefore, during the initial phases of protein folding, sheets are less likely to form.
learn more about helices here:
https://brainly.com/question/13032246
#SPJ11
What mL of a 0. 150 M Ca(OH)2 solution is
required to titrate a 200. 0 mL of a 0. 060 M HCl
solution to its equivalence point?
The mL of a 0.150 M Ca(OH)₂ solution required to titrate a 200.0 mL of a 0.060 M HCl solution to its equivalence point is 40.0 mL.
The balanced chemical equation for the reaction between Ca(OH)₂ and HCl is:
Ca(OH)₂(aq) + 2HCl(aq) → CaCl₂(aq) + 2H₂O(l)
From the equation, we can see that 1 mole of Ca(OH)₂ reacts with 2 moles of HCl. Therefore, the number of moles of HCl in the 200.0 mL of 0.060 M HCl solution is:
n(HCl) = M(HCl) x V(HCl) = 0.060 mol/L x 0.2000 L = 0.0120 mol
Since 1 mole of Ca(OH)₂ reacts with 2 moles of HCl, the number of moles of Ca(OH)2 required to react with the HCl is:
n(Ca(OH)₂) = 1/2 x n(HCl) = 1/2 x 0.0120 mol = 0.0060 mol
The concentration of the Ca(OH)₂ solution is 0.150 M, so the volume of Ca(OH)₂ solution required to provide 0.0060 mol of Ca(OH)₂ is:
V(Ca(OH)₂) = n(Ca(OH)₂) / M(Ca(OH)₂) = 0.0060 mol / 0.150 mol/L = 0.0400 L = 40.0 mL
Therefore, 40.0 mL of the 0.150 M Ca(OH)₂ solution is required to titrate the 200.0 mL of 0.060 M HCl solution to its equivalence point.
To know more about the Equivalence point, here
https://brainly.com/question/13166362
#SPJ4
if naoclo3 is dissolved in pure water will the ph increase, decrease, or stay the same?
When NaOClO3 is dissolved in pure water, the pH of the solution will increase. NaOClO3 is a salt that dissociates in water to form Na+ and ClO3-. The pH of the solution will depend on the basicity or acidity of these ions. Na+ is a neutral ion and will not affect the pH of the solution.
ClO3-, on the other hand, is a conjugate base of a weak acid (HClO3). As a result, ClO3- is a weak base that can accept protons from water molecules to form OH- ions. This process is called hydrolysis and leads to an increase in the pH of the solution.
Therefore, when NaOClO3 is dissolved in pure water, the pH of the solution will increase. This effect is more pronounced at higher concentrations of NaOClO3.
The degree of hydrolysis depends on the acid-base strength of the ions and the ionic strength of the solution. Overall, NaOClO3 is a basic salt that will increase the pH of pure water.
To know more about pH refer here:
https://brainly.com/question/2288405#
#SPJ11
which chemical would form the least acidic aqueous solution? a. hi b. hbr c. hcl d. hf
The chemical that would form the least acidic aqueous solution is HF (hydrofluoric acid).
Acidity depends on the strength of an acid, which is determined by its ability to dissociate in water to produce H+ ions. Among the given options (HI, HBr, HCl, and HF), hydrofluoric acid (HF) is the weakest acid.
This is because fluorine is more electronegative than other halogens, which results in a stronger bond with hydrogen, making it harder for HF to dissociate into H+ and F- ions in water. As a result, HF forms a less acidic aqueous solution compared to HI, HBr, and HCl.
To know more about electronegative click on below link:
https://brainly.com/question/17762711#
#SPJ11
The chemical that would form the least acidic aqueous solution is HF (hydrofluoric acid).
Acidity depends on the strength of an acid, which is determined by its ability to dissociate in water to produce H+ ions. Among the given options (HI, HBr, HCl, and HF), hydrofluoric acid (HF) is the weakest acid.
This is because fluorine is more electronegative than other halogens, which results in a stronger bond with hydrogen, making it harder for HF to dissociate into H+ and F- ions in water. As a result, HF forms a less acidic aqueous solution compared to HI, HBr, and HCl.
To know more about electronegative click on below link:
https://brainly.com/question/17762711#
#SPJ11
how many distinct angles from the vertical axis can the orbital angular momentum vector l make for an electron with = 5?
For an electron with orbital angular momentum quantum number (l) equal to 5, the possible distinct angles from the vertical axis that the orbital angular momentum vector can make are determined by the magnetic quantum number (m_l).
The orbital angular momentum vector of an electron is given by the equation L = (nh/2π)√(l(l+1)), where n is the principal quantum number, h is Planck's constant, and l is the angular momentum quantum number.
For an electron with n = 5, the maximum value of l is 4 (since l must be less than n). Therefore, the possible values of l for this electron are 0, 1, 2, 3, and 4.
The number of distinct angles that the orbital angular momentum vector can make from the vertical axis is equal to the number of values of l. Therefore, for an electron with n = 5, there are 5 distinct angles that the orbital angular momentum vector can make from the vertical axis.
Learn more about electron here: brainly.com/question/28977387
#SPJ11
calculate the root mean square speed of an oxygen gas molecule, o2 , at 35.0 ∘c .
The root mean square speed of an oxygen gas molecule (O2) at 35.0 °C is approximately 490.1 m/s.
To calculate the root mean square speed of an oxygen gas molecule (O2) at 35.0 °C, follow these steps:
1. Convert the temperature from Celsius to Kelvin: K = °C + 273.15
35.0 °C + 273.15 = 308.15 K
2. Use the root mean square speed formula: vrms = √(3RT/M), where vrms is the root mean square speed, R is the gas constant (8.314 J/(mol·K)), T is the temperature in Kelvin, and M is the molar mass of the gas in kg/mol.
3. Convert the molar mass of O2 to kg/mol:
Molar mass of O2 = 32 g/mol (16 g/mol for each oxygen atom)
1 g = 0.001 kg, so 32 g/mol = 0.032 kg/mol
4. Plug the values into the formula: vrms = √(3 x 8.314 J/(mol·K) x 308.15 K / 0.032 kg/mol)
5. Calculate the root mean square speed:
vrms ≈ √(240,183.665625 J/mol) = 490.0853 ≈ 490.1 m/s
Therefore, the root mean square speed of an oxygen gas molecule (O2) at 35.0 °C is approximately 490.1 m/s.
Learn more about root mean square speed : https://brainly.com/question/30759623
#SPJ11
If 0.455 moles of potassium iodide (KI) react, what mass of lead (1) iodide (Pbly) will be produced? 2 KI (aq) + 1 Pb(NO3)2 (aq) → 2 KNO3 (aq) + 1 Pbl2 (s) grams Final answers should be reported with the correct number of significant digits Submit -
The mass of PbI2 produced is 105 g (to three significant digits).
What is the mole ratio of KI to PbI2 in the balanced chemical equation?The mole ratio of KI to PbI2 in the balanced chemical equation is 2:1.
What is the molar mass of PbI2?The molar mass of PbI2 is 461.01 g/mol.
To solve this problem, we need to use stoichiometry to convert the given number of moles of KI to the mass of PbI2 produced.
From the balanced chemical equation, we can see that 2 moles of KI react with 1 mole of Pb(NO3)2 to produce 1 mole of PbI2. Therefore, the mole ratio of KI to PbI2 is 2:1.
We can use this ratio to calculate the number of moles of PbI2 produced:
0.455 moles KI x (1 mole PbI2 / 2 moles KI) = 0.228 moles PbI2
Next, we can use the molar mass of PbI2 to convert moles to grams:
0.228 moles PbI2 x 461.01 g/mol = 105.19 g PbI2
Learn more about mole ratio here:
https://brainly.com/question/15288923
#SPJ1
The mass of PbI2 produced is 105 g (to three significant digits).
What is the mole ratio of KI to PbI2 in the balanced chemical equation?The mole ratio of KI to PbI2 in the balanced chemical equation is 2:1.
What is the molar mass of PbI2?The molar mass of PbI2 is 461.01 g/mol.
To solve this problem, we need to use stoichiometry to convert the given number of moles of KI to the mass of PbI2 produced.
From the balanced chemical equation, we can see that 2 moles of KI react with 1 mole of Pb(NO3)2 to produce 1 mole of PbI2. Therefore, the mole ratio of KI to PbI2 is 2:1.
We can use this ratio to calculate the number of moles of PbI2 produced:
0.455 moles KI x (1 mole PbI2 / 2 moles KI) = 0.228 moles PbI2
Next, we can use the molar mass of PbI2 to convert moles to grams:
0.228 moles PbI2 x 461.01 g/mol = 105.19 g PbI2
Learn more about mole ratio here:
https://brainly.com/question/15288923
#SPJ1