Answer:
(c) Low temperature, high pressure
Explanation:
Liquefaction of a gas means the conversion of the gas to liquid. To convert a gas to liquid, we have to look a bit at the statements of the kinetic theory of gases.
Gases show ideal behavior within the range of high temperature and low pressure. Under these conditions, minimum intermolecular interactions occur between gas molecules.
However, as the temperature is deceased and pressure in increased, intermolecular interactions become significant and the gas begins to liquefy.
When 1 mol of methane is burned at constant pressure, −890 kJ/mol of energy is released as heat. If a 1.67 g sample of methane is burned at constant pressure, what will be the value of ∆H
Answer:
[tex]\Delta H=-92.7kJ[/tex]
Explanation:
Hello there!
In this case, according to the given information, we can infer that 890 kJ of energy are released when 1 mole of methane is burned; however, to find the total heat when 1.67 grams are burned, we first need to calculate the moles in this mass of methane:
[tex]1.67gCH_4*\frac{1molCH_4}{16.04gCH_4}=0.104molCH_4[/tex]
And thus, for calculating the resulting ∆H, we proceed as follows:
[tex]\Delta H=-890kJ/mol*0.104mol\\\\\Delta H=-92.7kJ[/tex]
Regards!
fuerza que ejerce el planeta tierra sobre los cuerpos que en ella se encuentran. Fuerza de distancia Fuerza de Contacto
Answer:
Ver explicacion
Explanation:
La gravedad es una fuerza que actúa a distancia. La fuerza que actúa entre la tierra y los cuerpos en ella es la fuerza gravitacional.
Es un ejemplo típico de una fuerza de acción a distancia.
Por lo tanto, la fuerza tat que existe entre la tierra y los cuerpos que se encuentran en ella es una fuerza de distancia.
To calculate the work that an object does when it moves covering a distance of 3000 meters when it is propelled by a force of 65 Newton, one of the principles of mechanics must be considered.
Physical principle of mechanicsA force does work when there is a displacement of the center of mass of the body on which the force is applied, in the direction of said force.
The work of the force on that body will be equivalent to the energy necessary to displace it, so that:
W = F.d
Force CalculationSubstituting the corresponding values in said formula:
F = 65N
d = 3000m
W = 65 N. 3000 m
W = 195000 W
Learn more about force calculations at https://brainly.com/question/23775339 #SPJ4
PLEASE ANSWER!!!!!!!!!!!!!
What is a zirconium, in your own words but be more detailed.What is a zirconium, in your own words but be more detailed.
Answer:
Zirconium is a silver-gray transition metal, a type of element that is malleable and ductile and easily forms stable compounds. It is also highly resistant to corrosion. It is commonly used in corrosive environments. Zirconium alloys can be found in pipes, fittings, and heat exchangers, according to Chemicool.
Explanation:
Answer: Today this element is widely used, as zircon, as Zirconium oxide and as the metal itself. Zirconium is to be found in ceramics, foundry equipment, glass, chemicals, and metal alloys. Zircon sand is used for heat-resistant linings for furnaces, for giant ladles for molten metal, and to make foundry moulds.
Explanation: Hope it help I think
please mark all that apply!
Answer:
F G there you go the guy on top is right
Explanation:
F G
How many liters of F2 do you have if you are given 100 grams of F2?
HELP PLEASE I DONT KNOW WHAT THIS MEANS IM CONFUSED
Explanation:
In an alpha emission, an alpha particle is ejected from a large nucleus. An alpha particle is simply a helium nucleus (atomic number is 2 and mass number is 4) so that means that the atomic number of the emitting nucleus decreases by 2 and its mass number decreases by 4.
a dry cell produces_______ electricity.
A) static
B) current
Answer:
dude! it's static!
Explanation:
a dry cell can't function and is therefore static!
hellppp i have a quiz please
hindi ko po maintindihan
Is this an alpha or beta decay?
how do valence electrons interact between non polar covalent, polar covalent, and ionic bonds?
Answer:
In non-polar covalent bonds, the electrons are equally shared between the two atoms. For atoms with differing electronegativity, the bond will be a polar covalent interaction, where the electrons will not be shared equally.
Explanation:
i did some reasherch so there^^
Determine the mass of NaCl needed to create a 500. ml solution with a concentration of 1.50 M.
The theory of plate tectonics is supported by data collected by scientists. One piece of data includes that earthquakes tend to occur*
a.along plate boundaries
b.along mountain ranges
c.along the banks of rivers
d.along the boundaries of glaciers
Answer:
is that a letter a
Explanation:
that is my answer
what is ionic compounds??
Answer:
The ionic compounds are chemical compounds composed of ions, which is held together by electrostatic forces termed ionic bonding.
REALIZAR LA MASA MOLECULAR DE LOS SIGUIENTES COMPUESTOS HIDROXIDO DE MAGNESIO = Mg(OH)2 ACIDO CARBONICO = H2CO3 GLUCOSA= C6H12O6
Answer:
Mg(OH)2 = 58.321g/mol
H2CO3 = 62.026g/mol
C6H12O6 = 180.156g/mol
Explanation:
Para hallar la masa molecular debemos, primero, identificar las moles de cada átomo presentes en una mol de una molécula. Por ejemplo, para el hidróxido de magnesio:
Mg = 1mol
O = 2mol
H = 2mol
Ahora, debemos hacer la suma del peso molecular de todos estos átomos. Esto es:
Mg = 1mol * (24.305g/mol) = 24.305g/mol
O = 2mol * (16g/mol) = 32g/mol
H = 2mol* (1.008g/mol) = 2.016g/mol
El peso molecular del hidróxido de magnesio es:
24.305g/mol + 32g/mol + 2.016g/mol = 58.321g/mol
Ácido Carbónico:
H = 2mol * (1.008g/mol) = 2.016g/mol
C = 1mol * (12.01g/mol) = 12.01g/mol
O = 3mol * (16g/mol) = 48g/mol
Masa molar = 62.026g/mol
Glucosa:
C = 6mol * (12.01g/mol) = 72.06g/mol
H = 12mol * (1.008g/mol) = 12.096g/mol
O = 6mol * (16g/mol) = 96g/mol
Masa molar = 180.156g/mol
Study the particle below carefully and answer
the questions that followed.
a)ldentify the particle.
b)Write the electronic configuration of the
particle.
c)State
i.Atomic number
ii.Mass number
iii.Proton number
iv.Electron number
d) Calculate the neutron number
e) State the valency
f)What is the valence electrons?
Answer:
b is the answer hope that helps
what physical and social systems are involved in the service industry
Answer:
Hey mate.....
Explanation:
This is ur answer........
For example, the communications industry includes all of the physical and social systems that produce books, newspapers, magazines, radio and television broadcasts, billboard advertisements, Internet websites, telephones, and telecommunications, such as the GPS.
Hope it helps!
Brainliest pls!
Follow me! :)
Why study science?
Lmk ASAP
Tipo de enlace en los compuestos. Compuesto /Electronegatividad Elemento 1/Electronegatividad Elemento 2/ Diferencia de electronegatividad (resta) Tipo de enlace CO2 KCl H2O
Answer:
Tipo de enlace enlace en CO2 - Covalente
Tipo de enlace enlace en KCl - iónico
Tipo de enlace enlace en H2O: enlaces covalentes y de hidrógeno
Electronegatividad de CO2 - Diferencia en electronegatividad de carbono (EN = 2.5) y oxígeno (EN = 3.5) = 3.5 - 2.5 = 1
Diferencia en electronegatividad de KCl = 3,2 -0,8 = 2,4
Diferencia en electronegatividad de H2O = 3.5 -2.1 = 1.4
Explanation:
Tipo de enlace enlace en CO2 - Covalente
Tipo de enlace enlace en KCl - iónico
Tipo de enlace enlace en H2O: enlaces covalentes y de hidrógeno
Electronegatividad de CO2 - Diferencia en electronegatividad de carbono (EN = 2.5) y oxígeno (EN = 3.5) = 3.5 - 2.5 = 1
Diferencia en electronegatividad de KCl = 3,2 -0,8 = 2,4
Diferencia en electronegatividad de H2O = 3.5 -2.1 = 1.4
organs are directly made up of what lower level of cellular organization
Answer:
hwejfhwefefewf
Explanation:
efwffhhfghr
17. A scientist determines an unknown metallic sample to have 77 protons and 77 electrons with a mass number of 192. How many neutrons does one
metal atom contain?
Answer:
Ok so hot u hahaha
Explanation:
Hshshhdhdi jsushshshshshhdhdhd hshshshshsh hdhdhdhd hdhdhdhd hdhdh
A Starting substance in a chemical reaction is called a _______________.
1. reactant
2. product
3. chemical reaction
4. physical reaction
Answer:
1.)REACTANT
These starting substances of a chemical reaction are called the reactants, and the new substances that result are called the products.Which layer of the earth is the thinnest and thickest?
Answer:
crust
Discuss with the whole class what the relative thicknesses of the layers are — that the inner core and outer core together form the thickest layer of the Earth and that the crust is by far the thinnest layer.
Explanation:
Discuss with the whole class what the relative thicknesses of the layers are — that the inner core and outer core together form the thickest layer of the Earth and that the crust is by far the thinnest layer.
Which of the following is a correct statement about water? (3 points)
Hydrogen bonding causes water to be strongly cohesive.
Hydrogen bonding causes water to have a low surface tension.
Water is a universal solvent because polar and nonpolar solutes can dissolve in it.
Water is less dense as a liquid than as a solid because of changes in bond structure.
Answer:
A: Hydrogen bonding causes water to be strongly cohesive.
Explanation:
Water has a high surafce tension. Hence droplets of water
Water cannot dissolve non polar substances like oil; only polar
Water is actually less dense in solid form :)
Hydrogen bonding causes water to be strongly cohesive.
This sticking together of like substances is called cohesion. Depending on how attracted molecules of the same substance are to one another, the substance will be more or less cohesive. Hydrogen bonds cause water to be exceptionally attracted to each other. Therefore, water is very cohesive.
Cohesion
Cohesion, also called cohesive attraction or cohesive force, is the action or property of like molecules sticking together, being mutually attractive. It is an intrinsic property of a substance that is caused by the shape and structure of its molecules, which makes the distribution of surrounding electrons irregular when molecules get close to one another, creating an electrical attraction that can maintain a microscopic structure such as a water drop. In other words, cohesion allows for surface tension, creating a "solid-like" state upon which light-weight or low-density materials can be placed.
Learn more about Cohesion
https://brainly.com/question/18176896
#SPJ2
1 An
atom
has 20
number?
with 39
neutron
mass number
it's
atomic
yes it is atomic if the mass number is that high
Please help me on this question
Increasing temperature makes a
reaction rate faster. Which of the
following best explains the above?
A. high-temperature meltdown
the reactants so it is easier to
react
O
B. High temperature increases
the number of high energy
collisions
C. reactants can evaporate
when they are heated up
D. Products favor higher
temperature reactants.
Answer:
High temperature increases the number of high energy collisions
Explanation:
Increasing the temperature a reaction takes place at increases the rate of reaction. At higher temperatures, particles can collide more often and with more energy, which makes the reaction take place more quickly.
A student used the Dumas method to
determine the molar mass of a volatile
material. They placed the container into the
ice bath BEFORE all of the material was
vaporized. What will happen to their final
calculations?
A. The Molar Mass will be too low.
B. The Molar Mass will not be effected.
C. The Molar Mass will be too high.
Answer:
B. The molar Mass will not be effected
Explanation:
HIPE IT HELPS
Please help me I will give brainliest to the first correct answer
Answer:
OPTIC B) HEPT-HOPE IT IS HELPFUL
what is the variable for the quantity of heat in a system?
Answer:
The heat capacity is the amount of heat, expressed usually in Joules or calories, needed to change the system by 1 degree Celsius. The specific heat capacity is the amount of heat required to raise 1 gram of a substance by 1 degree Celsius.
Explanation:
For example, the specific heat of H2O(l) is 4.18 J/g ° C.