Taking into account the definition of dilution, the concentration of the final solution is 5 mg/L.
First of all, you have to know that dilution is the reduction in concentration of a chemical in a solution. The process consists of adding more solvent to the same amount of solute.
In a dilution the amount of solute does not change, but as more solvent is added, the concentration of the solute decreases.
A dilution is mathematically expressed as:
Ci×Vi = Cf×Vf
where
Ci: initial concentration Vi: initial volume Cf: final concentration Vf: final volumeIn this case, you know:
Ci= 25 mg/L Vi= 10 mL Cf= ? Vf= 50 mLReplacing in the definition of dilution:
25 mg/L × 10 mL= Cf × 50 mL
Solving:
Cf= (25 mg/L × 10 mL)÷ 50 mL
Cf= 5 mg/L
In summary, the concentration of the final solution is 5 mg/L.
Learn more about dilution:
brainly.com/question/20113402?referrer=searchResults brainly.com/question/22762236?referrer=searchResultsCalculate AH for the following reaction:
-
-
2NO2(g) → N204(9)
Use appropriate data from the following listing:
NO(g) + NO2(g) + O2(g) → N2O5(9) ΔΗ, = -113.7
NO(g) + NO2(g) → N2O3(g)
9
AH2 = -36.1
N205(9) ► N,05(s)
,
AH = -55.3
N2O3(g) + N2O3(s) -→ 2N204(9)
ΔΗ, = -8.100
2NO(g) + O2(g) → 2NO2(g)
ΔΗς = -112
Answer:
Explanation:
Select reason(s) why 1-hydroxy-2-methyl-5-isopropylbenzene is an incorrect systematic name for carvacrol.
a. If named with benzene as the parent, the methyl group needs to have the first locant in order to minimize the number of the third locant.
b. The substituents are not listed alphabetically.
c. If named with benzene as the parent, the hydroxyl group needs to have the first locant in order to minimize the number of the third locant.
d. The substituents are not listed in order of increasing mass.
The reason why 1-hydroxy-2-methyl-5-isopropylbenzene is not the correct systematic name for carvacrol is because the substituents are not listed alphabetically.
IUPAC nomenclature provides the correct and acceptable system of naming organic compounds which are internationally acceptable among scientists.
According to the rules of IUPAC nomenclature, compounds are named in alphabetical order. The names of the locants are ordered in such a way that they have the lowest number. Following IUPAC nomenclature, the correct name of the compound ought to be, 1-hydroxy-5-isopropyl-2-methylbenzene.
Learn more: https://brainly.com/question/11587934
Explain why the element of an atom doesn't change if you remove or add electrons or neutrons
Answer: Does not change.
Explanation:
The atomic number and the electrical charge of that atom would remain unchanged. Neutrons do not carry an electrical charge so adding or removing them from the nucleus does not change the electrical charge of the nucleus.
What is equivalent to 750 joules
Answer:
0.179254 kilocalories
Explanation:
divide the energy value by 4184
[tex]0.179254[/tex] that would be your answer
help please ill do anything really!!!!!!!
Answer:
The first one is air the second is decreases the third is water the fourth is gas and the last is liquid.
Explanation:
Hope it helps.
Describe how you would separate rock salt to obtain salt crystals and pure dry sand.
30 POINTS TO HONEST ANSWER WILL REPORT IF U JUST ANSWER FOR POINTS-
Which of the following correctly balances the equation below? 263 106 Sg 259 104 Rf
A. Y
B. 4 2 He
C. 0 -1 e
D. 0 1 H
Answer:
The answer is 4 2 He. I know this because alpha decay occurs when an unstable nucleus emits an alpha particle which is identical to a helium-4 nucleus.
If the specific heat of Copper is 0.385 J/g °C and I add 10 kJ of heat to a 10kg block of copper, how much will the temperature of copper change?
a. 0.384 °C
b. 2.60 °C
c. 38.4 °C
d. 384 °C
e. more than 400°C
We have that for the Question "If the specific heat of Copper is 0.385 J/g °C and I add 10 kJ of heat to a 10kg block of copper, how much will the temperature of copper change?" it can be said that the temperature of copper change is
dt=2.60C
Option B
From the question we are told
If the specific heat of Copper is 0.385 J/g °C and I add 10 kJ of heat to a 10kg block of copper, how much will the temperature of copper change?
a. 0.384 °C
b. 2.60 °C
c. 38.4 °C
d. 384 °C
e. more than 400°C
Generally the equation for the Heat is mathematically given as
Q=Mcdt
Therefore
dt=\frac{1}{0.385}
dt=2.60C
Therefore
the temperature of copper change is
dt=2.60C
Option B
\
For more information on this visit
https://brainly.com/question/23379286
Saccharin (C7H5NO3S) is sometimes dispensed in tablet form. Ten tablets with total mass of 0.5795 g were dissolved in water. They were oxidized to convert all the sulfur to sulfate ion, which was precipitated by adding an excess of barium chloride solution. The mass of BaSO4 obtained was 0.5240 g. What is the average mass of saccharin per tablet
The dissolution of a substance in another is a kind of chemical reaction.0.4575 g of saccharine is present in the ten tablets of saccharine dissolved in water.
From the information in the question, the sulfur in saccharin (C7H5NO3S) was completely converted to sulfate ion (SO4^2-). This ion was now reacted with excess barium chloride to form barium sulfate BaSO4. This later reaction occurs as follows;
SO4^2-(aq) + Ba^2+(aq) --------> BaSO4(s)
Number of moles of BaSO4 obtained = 0.5240 g/233 g/mol
= 0.0025 moles
Since the reaction is 1:1, 0.0025 moles of sulfate ions from saccharine reacted.
Molar mass of saccharine = 7(12) + 5(1) + 14 + 3(16) + 32
= 84 + 5 + 14 + 48 + 32 = 183 g/mol
Mass of saccharine in the tablet = 0.0025 moles × 183 g/mol
= 0.4575 g
Learn more: https://brainly.com/question/1527403
Calculate the approximate number of sodium ions in 2.52 g of sodium sulphate,
Na2SO4.
Explanation:
Please send me the answer of this question
Calculate the concentrations of all species in a 0.100 M Na2CO3 solution.
The concentrations of all species in a 0.100 M Na₂CO₃ are:
1. The concentration of Na⁺ in the solution is 0.2 M.
2. The concentration of CO₃²¯ in the solution is 0.1 M
We'll begin by writing the dissociation equation for Na₂CO₃. This is illustrated below:
Na₂CO₃(aq) —> 2Na⁺(aq) + CO₃²¯(aq)
Thus, the species in Na₂CO₃ are Na⁺ and CO₃²¯
From the balanced equation above,
1 mole of Na₂CO₃ contains 2 moles Na⁺ and 1 mole of CO₃²¯
1. Determination of the concentration of Na⁺.
From the balanced equation above,
1 mole of Na₂CO₃ contains 2 moles Na⁺
Therefore,
0.100 M Na₂CO₃ will contains = 2 × 0.1 = 0.2 M Na⁺
Thus, the concentration of Na⁺ in the solution is 0.2 M.
2. Determination of the concentration of CO₃²¯
1 mole of Na₂CO₃ contains 1 mole of CO₃²¯
Therefore,
0.100 M Na₂CO₃ will also contains 0.100 M CO₃²¯
Thus, the concentration of CO₃²¯ in the solution is 0.1 M
Learn more: https://brainly.com/question/23941053
3nahco3(aq) + h3c3h5
On the 14 point pH scale, soaps and cleaning solutions are typically -
Question 7 options:
0-6
8-14
7
Answer:The answer is 8-14
Explanation:It can range from 9-10 or
or above to 14 depending on the amount of leached wood ash(lye) a.k.a potassium carbonate which is an alkalline compound
Answer:
8-14
Explanation:
Based on the results of the genetic crosses you have shown how think the red and white flower alleles can "interact with one another? Explain both the F¹ and F² generations. ps.. ill mark you the brainliest
Answer:
in f1 its shows all hybrid red
Explanation:
RR rr
R R
The electronic transition in a hydrogen atom from n = 6 to n = 3 emits electromagnetic radiation having a higher frequency than a transition
from n = 5 to n = 3
what element has a high content of brilliant yellows color
Answer: , sulfur and gold are most obviously yellow.
Explanation: Phosphorus, arsenic and antimony have allotropes which are yellow or whitish-yellow; fluorine and chlorine are pale yellowish gases.
Use the pie section above to answer this question.
The pie section shows Earth's composition from the center to the surface. Section IV is most likely composed of
solid iron.
basalt rock.
liquid iron.
granite rock.
And sorry for not putting the picture in the first one
which is more likely HON or HNO
NO- (isoelectronic or same as O2) is hard base
H+ is hard acid
bonding depends which pi* has more electron density and calc shows more on N...hence HNO is more likely (bent) molecule
whatever....
wat are the dangers of chemicals in the laboratory
What is wrong with this model of the atom.
Answer:
A. The neutrons and electrons are in the wrong place.
Explanation:
The atom's nucleus contains both protons and neutrons, whilst the electrons are arranged in shells around the nucleus.
When ice turns into a liquid, this is a __1__ change because __2__.
Answer:
1.physical change because the ice from a solidform cahnged into a liquid form
can anyone heelp me pls
Answer:
lotion 2. capsule 3. suspension 1.
A student uses a solution of potassium hydroxide to titrate a solution of nitric acid. Which question is the student trying to answer?(1 point)
What is the concentration of nitric acid?
What is the concentration of nitric acid?
How much nitric acid solution is present?
How much nitric acid solution is present?
What is the concentration of potassium hydroxide?
What is the concentration of potassium hydroxide?
How many moles of potassium hydroxide are present?
How many moles of potassium hydroxide are present?
Answer:
A. What is the concentration of nitric acid?
Explanation:
its right
Answer:
A
Explanation:
Il See Periodic Table See Hint
A gas composed of chlorine and oxygen has a density of 2.875 g/L at 750.0 mm Hg and 11°C. What is the most likely molecular formula
of the gas?
х
х
He
01
The molecular formula shows the number of atoms present. The molecular formula of the gas is most likely ClO2.
In terms of gas density and molar mass, the ideal gas equation can be written in the form; PM = dRT
Where;
P = pressure of the gas
M = molar mass of the gas
d = density of the gas
R = molar gas constant
T = temperature of the gas
Making the molar mass of the gas the subject of the formula;
M = dRT/P
d = 2.875 g/L
R = 0.082 atmLmol-1K-1
T = 11°C + 273 = 284 K
P = 750.0 mm Hg or 0.99 atm
Substituting values;
M = 2.875 g/L × 0.082 atmLmol-1K-1 × 284 K/ 0.99 atm
M = 67.6 g/mol
The gas is most likely ClO2.
Learn more: https://brainly.com/question/11969651
Calculate the change in enthalpy for the following reaction:
4 HCl (g) + O2 (g) → 2 H20 (g) + 2 Cl2 (g)
I will mark brainliest.
(I don't need an explanation. I just want to double check my worksheet answers.)
Answer:13hct
Explanation:
If gas is truly to be classified as a form of matter this means it can be measured. What form of gas can be measured?
Answer:
Gas is sometimes measured in cubic feet at a temperature of 60 degrees Fahrenheit and an atmospheric pressure of 14.7 pounds per square inch. Gas production from wells is discussed in terms of thousands or millions of cubic feet (Mcf and MMcf). Resources and reserves are calculated in trillions of cubic feet (Tcf).
Answer:
A dry gas, that is a natural gas, is the form in which gas can be measured.
And gas is measured in cubic meter, that is, it's volume is measured and the size of gas can be determined.
All the best!
Which location in the diagram above is the Northern Hemisphere experiencing summer?
Location A
Location B
Location C
Location D
Answer:
c
Explanation:
Answer:
Location b is experiencing summer
In the Northern Hemisphere, Summer season is represented here location B.
You and your family have just arrived in Water Cycle Land. You are going on a new ride called the Water Cycle. You sit in your seat and the ride begins. All of a sudden something goes wrong. Your body is turning into a water droplet! Think about what you have learned about the water cycle. Now tell a story about what happens to you as you travel through the water cycle. By the way, how do you get your body back to normal?
Answer:Me and my family went out and I fell into water and turnt into a water droplet and my family catches me in they hand and put fire
Explanation:
Muối sunfua với hidro sunfua có giống nhau về tính chất vật lý không ạ. Ứng dụng và điều chế muối sufua như thế nào ạ
the answer is is is is is is is is is is is is is is
4. Why is it that your feet don't sink into the earth?
Answer:
because our feet has more density