Answer:
The applied force on the vehicle is 5,000 N
Explanation:
From the question, we have the following parameters of the motion of the vehicle;
The form of the velocity with which the vehicle is travelling = Uniform velocity
The direction of motion of the vehicle = Along a straight and level stretch of the highway
The combined force which acts as resistance to the vehicle's motion = 5,000 N from rolling friction and resistance of the air opposite to the direction of motion
A vehicle travelling with uniform velocity has zero acceleration, therefore;
The acceleration of the vehicle, a = 0 m/s²
According to Newton's Second Law of Motion, we have;
Force, F = Mass, m × Acceleration, a
∴ The net force of acting on the vehicle, F = m × a
Where;
m = The mass of the vehicle
a = The acceleration of the vehicle = 0 m/s²
∴ F = m × 0 = 0
The net force on the vehicle = 0, therefore;
The applied force + The force of rolling friction and air resistance = 0
We therefore have;
The applied force + 5,000 N = 0
∴ The applied force = 0 - 5,000 N = -5,000 N
The applied force, F = 5,000 N in the direction of motion.
state one part of the body where you have a fixed joint
Examples of fixed joints include the joints between the bones in the skull and the joint where the radius and ulna bones meet in the lower arm
Answer:
Your skull
Explanation:
your skull has fixed joints
What causes mechanical wave motion
Answer:
A disturbance or vibration in matter
Explanation:
Answer:
A mechanical wave is a distance in matter that transfer energy through the matter. A mechanical wave starts when matter is disturbed. A source of energy is needed to disturb matter and start a mechanical wave.
Below is a single strand of DNA, what is the complementary base pair for the strand?
AAG, GCA, TCA, GAT
Cold packs are designed to become very cold when activated. When the pack is activated, a chemical reaction occurs to make the temperature of the cold pack decrease. What must be true of this chemical reaction? (2 points) The reaction releases energy to its surroundings. The reaction releases energy to its surroundings. The products and reactants have the same amount of energy. The products and reactants have the same amount of energy. The products have less energy than the reactants. The products have less energy than the reactants. The reaction absorbs energy from its surroundings.
Answer:
The reaction absorbs energy from its surroundings.
Explanation:
An endothermic reaction is any reaction in which energy is absorbed by the reaction system.Thus implies that energy is withdrawn from the environment A cold pack's function is based on an endothermic chemical reaction.
The absorption of energy by the reaction system means that the environment feels cool in an endothermic reaction.This manifests in a decrease in the temperature of the cold pack.
A device used to measure small currents is a(n)
a.
electric motor.
b.
commutator.
c.
armature.
d.
galvanometer.
Answer:
d.
galvanometer.
Explanation:
Galvanometer is the device which is used for measuring small currents due to changing magnetic field.
(b) The cylinder shown in figure 2 is fitted with a freely sliding piston containing an ideal gas of mass 13g and volume 1.0×10⁴ cm⁵ . The tempreture of the gas is 25°C and it is initially at atmospheric pressure.
(i) The gas is heated to a Tempreture of 400°C . what is the new volume of the gas?
Answer:
22600 cm³ (3 s.f.)
Explanation:
Please see the attached picture for the full solution.
What is the direction of the force on a positive charge when passing through a magnetic field as indicated in this diagram? Explain how you got
your answer.
Answer:
The direction of the magnetic force on a moving charge is perpendicular to the plane formed by v and B and follows right hand rule–1 (RHR-1)
Explanation:
hope this helps
Answer:
The direction is into the page. Your thumb is along the velocity vector and your fingers travel along the magnetic-field vector to leave your palm moving into the page
Explanation:
Plato
A conducting bar moves along a circuit with a constant velocity. A constant magnetic field is perpendicular to the bar and circuit. The bar covers 1.50 m2 of area in 1.00 second. An EMF of 3.57 V is induced in the circuit. What is the strength of the magnetic field in Tesla?
Answer:
2.38 T
Explanation:
Since the number of coils and the change in time are both 1, I set it up as 3.57=1.50(x) and then solved for x to be 2.38 T.
who is the richest artist in the Gambia 2020
Answer:
Jaliba Kuyateh is the most famous and wealthiest Gambian musician.
Which of the following is most likely to happen when a sound wave reflects
off a hard surface? (Assume that neither the source of the sound nor the hard
surface is moving.)
A. A beat frequency
B. An echo
O C. A change in speed
O D. A change in pitch
SUBMIT
Answer:
B. An echo
Explanation:
An echo is the sound heard after the reflection of sound waves from a hard surface. It has both advantages and disadvantages with respect to its applications.
Some of it applications include;
i. it can be used to determine the depth of the sea
ii. it can be used in crude oil exploration
iii. it can be used to determine the speed of sound in air
An echo is different to reverberation of sound.
Un tren va a una velocidad de 18m/s frena y se detiene en 15s calcula su aceleracion y la distancia recorrida al frenar
Answer:
Acceleration is -1.2 m/s² and distance covered is 135 m.
Explanation:
A train going at a speed of 18m / s brakes and stops in 15s calculates its acceleration and the distance traveled when braking
Given that,
The initial speed of the train, u = 18 m/s
Final speed, v = 0
Time, t = 15 s
We need to find acceleration and distance traveled when braking. Let a is acceleration and distance traveled.
Acceleration,
[tex]a=\dfrac{v-u}{t}\\\\a=\dfrac{0-18}{15}\\\\a=-1.2\ m/s^2[/tex]
Using third equation of motion,
[tex]v^2-u^2=2ad\\\\d=\dfrac{v^2-u^2}{2a}\\\\d=\dfrac{0^2-18^2}{2\times (-1.2)}\\\\d=135\ m[/tex]
Hence, acceleration is -1.2 m/s² and distance covered is 135 m.
A 15N block is sliding at constant speed across the frictionless floor of an ice rink.
Answer:
so, why we have to find here..
stay safe healthy and happy.A person can lands safely on the surface of the earth but not moon. why?
Answer:
The gravitational force on the moon is less than on Earth, because the strength of gravity is determined by an objects' mass. The bigger the object, the bigger the gravitational force. Gravity is pretty much everywhere
Explanation:
Why might astronauts choose to “lope” or hop rather than walking or running on the moon? Astronauts can “lope” in the moon's low gravity levels, even though this gait pattern is very difficult to use on Earth.
What is the potential difference across a circuit that delivers 4.2A to a 500W motor?
Answer:
Thus, the potential difference is 119 V.
Explanation:
Current, I = 4.2 A
Power, P = 500 W
The rate of doing work is called power.
The SI unit of power is Watt.
The commercial unit of power is horse power.
1 horse power = 746 Watt
The formula of the electrical power is
P = V I
where, V is the voltage and I is the current.
Substitute the values in the formula
500 = 4.2 x V
V = 119 V
A 20×10⁹charge is moved between two points A andB that are 30mm apart and have an electric potential difference of 600v between them. calculate a) the electric field strength between A and B b)the work done on the charge.
Answer:
John Felix Anthony Cena is an American professional wrestler, actor, and television presenter. He is currently signed to WWE. Born and raised in West Newbury, Massachusetts, Cena moved to California in 1998 to pursue a career as a bodybuilder.
Explanation:
No matter how well we get along with our parents as adolescents, there comes a time when we need to break away and assert our own independence. There are several ways in which we do this, some of them deliberate and intentional and some of them not so intentional. Describe several ways you use or have used to break away from your parents. Briefly describe your parents' reactions.
Answer: I never said anything to them but if i did it would be "I need a break from you, i love you but sometimes I have to find the path on my own." i would say this if i wasn't scared to hurt them.
Explanation:
The water hyacinth lives in lakes and ponds it forms large floating mats of plants because it does not root in soil which adaptation lets it get nutrients directly from the water is it A.1 curly leaves B.Trailing C.Sturdy stems D. Upright flowers
Answer:
C. Sturdy stems
Explanation:
Sturdy stems is the adaptation that enables water hyacinth to get nutrients directly from the water because there is no roots are present for the absorption of nutrients from water. The hollow bulbous stem below each leaf of water hyacinth allows the plant to get nutrients from the water. This hollow bulbous stem allow the plants to float on the water surface, keeping the leaves and flowers above the water so they don't rot.
The half-life of iodine-131 is 8 days. If a sample originally contains 0.96 g of the isotope, how much will remain after 24 days?
Answer: you ever get the awnser?
Explanation:
Answer: 0.12 g
Explanation: I got it right on the quiz.
5. What structure did Friedrich Kekule discover that allowed carbon atoms can bond
with up to four other atoms at the same time?
can someone help me pls
Answer: food, female water
Explanation:
Can I have brainliest
Answer : dog horse cat lion deer moose tiger cheetah hippopotamus zebra rabbit penguin dolphin shark fish
Explanation:
Between which of the following surfaces would the force of friction be
greatest?
A. Rubber shoe soles on artificial turf
B. Rubber shoe soles on ice
C. Rubber shoe soles on asphalt
D. Rubber shoe soles on wet grass
What is a half-life?
Answer:
When yo die early
Explanation:
Answer: A I think but I'm sure that Half Life is a video game by Valve.
Explanation:
How does the circuit structure affect the brightness of a bulb? How does the circuit structure affect the energy required to keep bulbs lit? Summarize some of the tradeoffs (pros and cons) of wiring bulbs in series vs. Parallel.
Answer:
Part A
The relationship between the circuit structure and the brightness of the bulb are;
The brightness of the bulb depends on the voltage to which the bulb is connected to
Bulbs connected in parallel, are connected directly to the voltage of the power source and are therefore brighter than bulbs arranged in series due to the reduced potential difference between bulbs in series and the voltage source
Part B
Given that bulbs are brighter when arranged in parallel, they require more energy to keep the bulbs lit than when they are arranged in series
Part C
The pros and cons of wiring bulbs in series and parallel are;
Series Circuits Disadvantage
i) A failure of one bulb arranged in series can lead to a failure of the circuit
ii) Bulbs arranged in series are not as bright as bulbs arranged in parallel
iii) When the number of bulbs arranged in a series are increased, the brightness decreases
iv) The bulbs cannot be controlled independently
Advantages of Series Circuits
i) Series circuits consume less energy and the batteries last longer when the attached bulbs are arranged in series
Disadvantage of bulbs arranged in parallel
i) The battery power quickly consumed
The Advantages of Bulbs in Parallel
i) The bulbs light brighter when they are in parallel
ii) The bulbs can be individually controlled
iii) The current can flow through more than one path way
iv) When one bulb fuses, the others in the circuit keep working
Explanation:
A 100kg linebacker runs with a velocity of 5m/s towards an 88kg quarterback, who begins to back up
with a velocity of 2m/s to avoid being sacked
a.What is the momentum of the linebacker-quarterback system?
b.the quarterback is unsuccessful in evading the linebacker and gets sacked. what is the velocity of the football players just after the linebacker dives in for a tackle if the 2 players move as one clump?
Setting a time limit can help you achieve your goals. A. True B. False
Answer:
in my opinion i think is it a (true). Because it had helped my brother with school so i think it is true
Explanation:
Every second, the Sun converts about 600 million tons of hydrogen into 596 million tons of helium. The remaining 4 million tons of mass is Every second, the Sun converts about 600 million tons of hydrogen into 596 million tons of helium. The remaining 4 million tons of mass is converted to an amount of energy equal to 4 million tons times the speed of light cubed. converted to an amount of energy equal to 4 million tons times the speed of light. reabsorbed as molecular hydrogen. converted to an amount of energy equal to 4 million tons times the speed of light squared. ejected into space in a solar wind.
Answer:
Converted to an amount of energy equal to 4 million tons times the speed of light squared. ejected into space in a solar wind.
Explanation:
The 4 million tons of mass is converted to the amount of energy that is equal to 4 million tons times the speed of light squared. This energy moves from the sun with the help of solar winds and received by the planets present in the solar system. This solar energy moves in the form of solar radiation because there is no medium for propagation so that's why we can say that the mass is converted into energy that moves in the form of radiation in discrete packets.
According to the special theory of relativity, what is the fourth dimension?
Explanation:
A four-dimensional space is a mathematical extension of the concept of three-dimensional or 3D space. Three-dimensional space is the simplest possible abstraction of the observation that one only needs three numbers, called dimensions, to describe the sizes or locations of objects in the everyday world.
According to the special theory of relativity, the fourth dimension is time. The special theory of relativity, proposed by Albert Einstein in 1905, revolutionized our understanding of space and time.
It states that space and time are interconnected and form a four-dimensional framework known as spacetime. In this framework, three dimensions correspond to space (length, width, and height), and the fourth dimension is time. Einstein's theory introduced the concept of time dilation, which means that time can appear to pass differently for observers in relative motion. This idea challenges the notion of time as an absolute quantity and demonstrates that it is influenced by an observer's relative motion and gravitational fields.
To visualize the fourth dimension, consider a space-time diagram where an object's position in space is plotted against time. Each point on the diagram represents an event, combining its spatial coordinates with the time at which it occurred. This four-dimensional representation allows us to understand the relationship between space and time in a unified framework.
Learn more about Special Theory of Relativity here:
https://brainly.com/question/14140033
#SPJ2
The gravitational force is 2336 N for an object that is 4.15 x 10^6 m above the surface of the Earth? The radius of the Earth is 6.378 x 10^6 m. (Earth's mass is 5.97 x 10^24 kg) What is the mass of the object above earth?
Answer:
1.234gk
Explanation:
Which of these terms means an object's resistance to changing its motion?
Question 1 options:
inertia
velocity
newton
power
Question 2 (1 point)
Which of these equations is a representation of the 2nd Law of Motion?
Question 2 options:
v=d/t
W=Fd
F=ma
a=v/t
Question 3 (1 point)
Which words correctly complete the 3rd Law of Motion?
For every ___________ there is an equal and opposite ___________.
Question 3 options:
cause, effect
action, reaction
distance, velocity
cost, benefit
Question 4 (1 point)
Which of these could be a force that changes the motion of an object?
Question 4 options:
friction
a push or pull
air resistance
all of the above
Question 5 (1 point)
According to the second law of motion, which statement is TRUE?
Question 5 options:
every action has a reaction
a heavy object requires more force to push than a lighter object
an object at rest, stays at rest
heavy objects accelerate faster than lighter elements with the same force
Answer:
Inertia
F=ma
Action, reaction
All of the above
A heavy object requires more force to push than a lighter object.
A 7 cm thick and 20 cm long wedge is used to pierce a 3cm long log of diameter 20cm what is the velocity ratio of the wedge
Answer:
The velocity ratio of the wedge is 0.15
Explanation:
Use the following formula to calculate the velocity ratio
Velocity Ratio = Distance Moved by effort / Distance moved by Load
Where
Distance Moved by effort = 3cm
Distance moved by Load = 20 cm
Placing values in the formula
Velocity Ratio = 3cm / 20 cm
Velocity Ratio = 0.15