a stone is thrown vertically upward with a speed of 12m/s fromthe edge of a cliff 70 m high (a) how much later it reaches the bottom ofthe cliff? (b) what is its speed just before hitting? and (c) what totaldistance did it travel?

Answer:

Folk dance

Explanation:

hope i helped :)

The sets Z, [0,1] U [2,3], R{0}, and R\Q have been analyzed for connectedness. The connected components of each set have been identified, demonstrating their disconnected nature.

Given, we need to determine whether the sets are connected or disconnected using the definition of connected and disconnected sets. Also, we need to find all the connected components of each given set.

(a) [tex]$Z$[/tex] (the set of integers):

We can show that [tex]$Z$[/tex]is disconnected by splitting it into two open sets. Let [tex]S1 = {...,-2, -1, 0, 1, 2, ...}$ and $S2 = {..., -3, -2, -1, 0}$[/tex]. It can be seen that $S1$ and $S2$ are disjoint and open in [tex]$Z$[/tex]. Hence, $Z$ is disconnected. Connected components of [tex]$Z$[/tex] is [tex]$Z$[/tex] itself.

(b) [tex]$[0,1]\cup[2,3]$[/tex] (the union of two disjoint intervals):

To show that the given set is connected, consider any two open sets[tex], $U $ and $ V$, such $ that $[0,1]\cup[2,3]\subseteq U\cup V$[/tex]. WLOG, let [tex]$0\in U$[/tex].

Then [tex][0,1]\subseteq U$. But $U$[/tex] is open, so there must exist an open interval of the form [tex]$(a,b)$[/tex] which contains [tex]$0$[/tex] and is a subset of [tex]$U$[/tex]. Clearly, [tex]$a < 0$[/tex]. Now, [tex]$(a, b)\cup [2, 3]\subseteq U\cup V$[/tex]. Since [tex]$(a, b)\cup [2, 3]$[/tex] is connected, it follows that either [tex](a, b)\cup [2, 3]\subseteq U$ or $(a, b)\cup [2, 3]\subseteq V$[/tex].

Now, if [tex](a, b)\cup [2, 3]\subseteq U$, then $2\in U$[/tex]. Again, [tex]$U$[/tex] is open, so there exists an open interval of the form [tex](c,d)$ such that $2\in (c, d)$ and $(c, d)\subseteq U$[/tex].

It can be easily shown that [tex]$(c, d)\cup [0, 1]\subseteq U$[/tex]. Hence, [tex]$U = [0, 1] \cup [2, 3]$[/tex] which is connected. Similarly, it can be shown that [tex]$V$[/tex] is connected if it contains both [tex][0, 1]$ and $[2, 3]$. Thus, $[0,1]\cup[2,3]$[/tex] is connected. Connected components of [tex][0,1]\cup[2,3]$ are $[0,1]$ and $[2,3]$[/tex].

(c) [tex]$R{0}$[/tex] (the set of non-zero real numbers):

Let [tex]A = {x\in R | x < 0}$ and $B = {x\in R | x > 0}$[/tex]. Clearly, [tex]$A$[/tex] and [tex]$B$[/tex] are open and disjoint in [tex]$R{0}$[/tex] such that $A \cup B = R{0}$. Hence, [tex]$R{0}$[/tex] is disconnected. Connected components of [tex]R{0}$ are $A$ and $B$[/tex].

(d) [tex]$R\Q$[/tex] (the set of irrational numbers):

Let [tex]A = {x\in R\Q | x < a}$ and $B = {x\in R\Q | x > a}$[/tex]. Clearly, [tex]$A$[/tex] and [tex]$B$[/tex] are open and disjoint in [tex]$R\Q$[/tex] such that [tex]$A \cup B = R\Q$[/tex]. Hence, [tex]$R\Q$[/tex] is disconnected. Connected components of [tex]R\Q$ is $R\Q$[/tex] itself.

Learn more about connected components: brainly.com/question/30764221

#SPJ11

When an unbalanced force acts on an object, it changes the motion of the object.

When an unbalanced force is applied to an object, the net force acting on the object is not zero. According to Newton's second law of motion, the acceleration of an object is directly proportional to the net force acting on it and inversely proportional to its mass. Therefore, when an unbalanced force is exerted on an object, it causes a change in the object's motion.

The direction and magnitude of the acceleration depend on the direction and magnitude of the unbalanced force. If the unbalanced force is greater than the opposing forces acting on the object (such as friction or air resistance), the object will experience a change in its velocity and undergo acceleration in the direction of the net force. This acceleration can result in the object speeding up, slowing down, or changing its direction of motion.

It is important to note that when the net force acting on an object is zero, the object remains in a state of either rest or constant velocity, as described by Newton's first law of motion. In this case, the object is said to be in equilibrium, and the forces acting on it are balanced. However, when an unbalanced force is present, it disrupts this equilibrium and causes a change in the object's motion.

To learn more about unbalanced force refer:

https://brainly.com/question/227461

#SPJ11

Answer:

Water is polar molecule. ... The ionic compounds are dissolved as these ions attract the hydrogen( negative charge attraacts them) and oxygen (positive charge attracts them) whereas methanol is a polar molecule and forms hydrogen bond with water molecules and hence dissolves.

Explanation:

1.32A is  the current for such a computer if over the course of an 8 hour day, 3.8x104 c of charge pass through a typical computer

What do you mean by current?

A flow of charged particles, such as electrons or ions, through an electrical conductor or a vacuum is known as an electric current. The net rate of electric charge flow through a surface is how it is described.

Although current and electron flow in the opposing directions, current is the flow of electrons. While electrons move from negative to positive, current moves from positive to negative. The number of electrons that flow across a conductor's cross section in a second determines current.

q ⇒ 3.8x10^4 C i.e. 34000C

t ⇒ 8 hour i.e. 8×60×60 = 28800 s

i ⇒ q/t ⇒ 34000/28800 i.e. 1.32A

To learn more about electrons :

https://brainly.com/question/371590

#SPJ4

Answer:

Red, orange, yellow, green, blue, indigo and violet.

Explanation:

Hope I helped! cute copy and paste ☏ ♡ ☆⋆◦★◦⋆°*•°

. * . . ° . ● ° .

¸ . ★ ° :. . • ° . * :. ☆

° :. ° .☆ . ● .° °★

★ ★°★ . * . °☆ . ● . ★ ° . • ○ ● . ☆ ★ ° ☆ ¸. ¸ ★ . • ° . *

¸ . ★ ° :. :. . ¸ . ● ¸ ° ¸. * ● ¸ °☆

☆ °☆ . * ● ¸ . ★¸ .

. * . . ° . ● ° .

° :. ° . ☆ . . • . ● .° °★ Not sure how to copy and paste? Just right click your mouse and choose copy in options, to release repeat the process and just paste it. No mouse? Select the text with your computer pad and use ctrl c to release, ctrl v. On mobile? Press on your screen and select the text, use the option copy and paste wherever you would like!

⭐ Hii ⭐

➡️ Abbreviation for shades of colors often described as creating rainbows: red, orange, yellow, green, blue, indigo, and violet. Its beginning is sometimes called VIBGYOR in reverse order.

Byy...

The side length L of the cubical box, determined by the absorption of a photon with a wavelength of 38.0 nm during the transition from the ground state to the second excited state, is approximately 11.21 nm.

To determine the side length L, we need to consider the relationship between the energy of the photon and the energy difference between the electron's initial and final states.

The energy of a photon is given by the equation E = hc/λ, where h is Planck's constant (6.626 × 10⁻³⁴ J·s), c is the speed of light (2.998 × 10⁸ m/s), and λ is the wavelength of the photon.

In this case, the energy of the absorbed photon corresponds to the energy difference between the ground state and the second excited state of the electron in the box.

Since the box is three-dimensional, the energy levels are given by the equation[tex]\(E = \frac{{\pi^2\hbar^2}}{{2m}}\left(\frac{{n_1^2}}{{L^2}} + \frac{{n_2^2}}{{L^2}} + \frac{{n_3^2}}{{L^2}}\right)\)[/tex], where π is a constant, ħ is the reduced Planck's constant (h/2π), m is the mass of the electron, n₁, n₂, and n₃ are the quantum numbers representing the energy levels, and L is the side length of the box.

By equating the energy of the photon to the energy difference between the states, we can solve for L. Plugging in the given values,

[tex]We have \( \frac{{hc}}{{\lambda}} = \frac{{\pi^2\hbar^2}}{{2m}}\left(\frac{{0^2}}{{L^2}} + \frac{{2^2}}{{L^2}} + \frac{{0^2}}{{L^2}}\right) \). Simplifying and solving for L, we find \( L \approx \sqrt{\frac{{2h\lambda}}{{4\pi^2m}}} \).Substituting the values and evaluating, \( L \approx \sqrt{\frac{{2 \times 6.626 \times 10^{-34} \, \text{J}\cdot\text{s} \times 38.0 \times 10^{-9} \, \text{m}}}{{4\pi^2 \times \text{electron mass}}}} \).[/tex]

After performing the calculations, we obtain L ≈ 11.21 nm.

To know more about wavelength, refer here:

https://brainly.com/question/31143857#

#SPJ4

Answer:

The distance between the Earth and the Sun is:

1.5 multiplied by 10 raised to the power 8 km

Explanation:

(5.0 x 10²) x (3.0 x 10⁸) = 1.5 x 10¹¹ meters = 1.5 x 10⁸ km.

The amplitude of the wave is 0.750 cm, the period is 0.004 s, the frequency is 250 Hz, the wavelength is 15.7 cm, the speed of propagation is 3925 cm/s, and the wave is traveling in the +x-direction.

Part A: The amplitude of a wave represents the maximum displacement of the wave from its equilibrium position. In this case, the amplitude is given by the coefficient of the cosine function, which is 0.750 cm. Therefore, the amplitude of the wave is 0.750 cm.

Part B: The period of a wave is the time it takes for one complete cycle of the wave to pass a given point. The period (T) is the reciprocal of the angular frequency (ω), which is the coefficient of t in the argument of the cosine function. In this case, the angular frequency is 250 s^(-1), so the period is T = 1/ω = 1/(250 s^(-1)) = 0.004 s.

Part C: The frequency of a wave is the number of complete cycles passing a given point per unit time. The frequency (f) is the reciprocal of the period (T). In this case, the frequency is f = 1/T = 1/0.004 s = 250 Hz.

Part D: The wavelength of a wave is the distance between two adjacent points in the wave that are in phase. For a transverse wave, the wavelength (λ) is related to the angular wave number (k) by the equation λ = 2π/k. The angular wave number is the coefficient of x in the argument of the cosine function. In this case, the angular wave number is 0.400 cm^(-1), so the wavelength is λ = 2π/(0.400 cm^(-1)) = 15.7 cm.

Part E: The speed of propagation (v) of a wave is related to its frequency (f) and wavelength (λ) by the equation v = fλ. In this case, the speed of propagation is v = (250 Hz)(15.7 cm) = 3925 cm/s.

Part F: To determine the direction of wave propagation, we look at the coefficient of x in the argument of the cosine function. In this case, the coefficient is positive (0.400 cm^(-1)), indicating that the wave is traveling in the +x-direction.

In conclusion, the amplitude of the wave is 0.750 cm, the period is 0.004 s, the frequency is 250 Hz, the wavelength is 15.7 cm, the speed of propagation is 3925 cm/s, and the wave is traveling in the +x-direction.

To know more about wavelength visit:

https://brainly.com/question/10750459

#SPJ11

Answer:

The magnitude of the magnetic force acting on the conductor is 0.75 Newton

Explanation:

The parameters given in the question are;

The length of the straight segment of wire, L = 25 cm = 0.25 m

The current carried in the wire, I = 5 A

The orientation of the wire with the magnetic field = Perpendicular

The strength of the magnetic field in which the wire is located, B = 0.60 T

The magnetic force, 'F', is given by the following formula;

F = [tex]\underset{I}{\rightarrow }[/tex]·L×[tex]\underset{B}{\rightarrow }[/tex] = I·L·B·sin(θ)

Where;

[tex]\underset{I}{\rightarrow }[/tex] = The current flowing, I

L = The length of the wire

[tex]\underset{B}{\rightarrow }[/tex] = The magnetic field strength, B

θ = The angle of inclination of the conductor to the magnetic field

Where I = 5 A, L = 0.25 m, B = 0.60 T, and θ = 90°, we get;

F = 5 A × 0.25 m × 0.60 T × sin(90°) = 0.75 N

Therefore

The magnitude of the magnetic force, F = 0.75 N.

The magnitude of the electric field between the plates when there is a layer of dust is higher than when there is no layer of dust. The resistances are in seriesThe gas in the precipitator behaves in a highly non-Ohmic manner. The current is proportional to the third power of the electric field.

The effective resistance of the gas depends strongly on the applied field. After a layer of dust has accumulated on the ground plate, the effective resistance of the gas is increasing. Once a layer of dust has accumulated, the effective resistance rises to a high level. This increase in resistance is due to the layer of dust between the plates.The magnitude of the electric field between the plates when there is a layer of dustThe magnitude of the electric field between the plates when there is a layer of dust is higher than when there is no layer of dust.

The reason for this is that the resistance of the gas in the precipitator is higher when there is a layer of dust. This means that the potential difference between the plates must be increased to maintain the same current. The electric field between the plates is proportional to the potential difference between the plates divided by the distance between the plates. In series, the resistances add together. Therefore, the effective resistance of the gas in the precipitator is the sum of the resistance of the gas and the resistance of the layer of dust.

To know more about resistance visit :

https://brainly.com/question/32301085

#SPJ11

The orbital period of the farther asteroid will be less than twice the orbital period of the closer one.

The orbital period of an object around the Sun depends on its distance from the Sun. According to Kepler's third law of planetary motion, the square of the orbital period is directly proportional to the cube of the semi-major axis (orbital radius) of the object. Since the two asteroids have different orbital radii, their orbital periods will differ.

However, the relationship between orbital radius and orbital period is not linear but follows a power law. In this case, the ratio of the orbital periods can be calculated by taking the cube root of the ratio of the orbital radii. By applying this formula, we find that the ratio of the orbital periods is approximately 1.5874. Therefore, the orbital period of the farther asteroid will be less than twice the orbital period of the closer one, making option 4 the correct answer.

Learn more about Kepler's third law here:

https://brainly.com/question/30404084

#SPJ11

The [tex]$y(x) = Ax^n e^{-\frac{mwx^2}{2h}}$[/tex]  is an approximate solution to the given differential equation.

The given Differential equation is:

[tex]\[-\left(\frac{h^2}{2m}\right) \frac{d^2y}{dx^2} + \frac{1}{2}mw^2x^2y = Ey\][/tex]

Let us calculate the derivatives of [tex]$y(x)$[/tex] with respect to [tex]{x}[/tex]

First derivatives:

[tex]\[\frac{dy}{dx} = Anx^{n-1} e^{-\frac{mwx^2}{2h}} - mwx Ax^n e^{-\frac{mwx^2}{2h}}\][/tex]

Second derivatives:

[tex]\[\frac{d^2y}{dx^2} = An(n-1)x^{n-2} e^{-\frac{mwx^2}{2h}} - 2mwx Anx^{n-1} e^{-\frac{mwx^2}{2h}} - (mwx)^2 Ax^n e^{-\frac{mwx^2}{2h}}\][/tex]

Now, substitute [tex]$y(x)$[/tex] and its derivatives into differential equations:

[tex]\[-\left(\frac{h^2}{2m}\right) \left[ An(n-1)x^{n-2} e^{-\frac{mwx^2}{2h}} - 2mwx Anx^{n-1} e^{-\frac{mwx^2}{2h}} - (mwx)^2 Ax^n e^{-\frac{mwx^2}{2h}} \right] + \frac{1}{2}mw^2x^2 Ax^n e^{-\frac{mwx^2}{2h}} = Ey\][/tex]

Simplifying the equations we get:

[tex]\[e^{-\frac{mwx^2}{2h}} \left[ An(n-1)hx^{n-2} - 2mwx Anhx^{n-1} - (mwx)^2Ax^n + \frac{mw^2}{2}x^2 Ax^n \right] = Ey\][/tex]

Since, [tex]$y(x) = Ax^n e^{-\frac{mwx^2}{2h}}$[/tex] satisfies the differential equation after simplification, we can conclude that it is an approximate solution to the given differential equation.

To learn more about differential equation, refer to the link:

https://brainly.com/question/17004129

#SPJ4

The distance from the wire is approximately 0.100 meters. This calculation is based on Ampere's law and the given values of current and magnetic field.

The magnetic field produced by a long, straight wire carrying a current can be calculated using Ampere's law. Ampere's law states that the magnetic field at a distance r from a long, straight wire carrying a current I is given by:

B = (μ₀I) / (2πr)

where B is the magnetic field, μ₀ is the permeability of free space (approximately 4π × 10^(-7) T·m/A), I is the current, and r is the distance from the wire.

In this case, we are given the current I as 5.59 A and the magnetic field B as 2.23 μT. To find the distance from the wire, we rearrange the formula:

r = (μ₀I) / (2πB)

Substituting the values:

r = (4π × 10^(-7) T·m/A × 5.59 A) / (2π × 2.23 × 10^(-6) T)

r ≈ 0.100 m

Therefore, the distance from the wire is approximately 0.100 meters.

The distance from the wire is approximately 0.100 meters. This calculation is based on Ampere's law and the given values of current and magnetic field.

To know more about Ampere's law visit:

https://brainly.com/question/17070619

#SPJ11

Answer:

Explanation:

In chemistry, the term transition metal has three possible definitions: The IUPAC definition defines a transition metal as "an element whose atom has a partially filled d sub-shell, or which can give rise to cations with an incomplete d sub-shell".

Answer:

Transition elements (also known as transition metals)

Explanation:

are elements that have partially filled d orbitals. IUPAC defines transition elements as an element having a d subshell that is partially filled with electrons, or an element that has the ability to form stable cations with an incompletely filled d orbital.

a) At the point the block is released, the initial velocity is zero, so the initial kinetic energy of the block is zero. The block is at a height of 55 meters from the ground, so its gravitational potential energy can be calculated using the formula;

PE = mghwhere m = 6 kg (mass of the block), g = 9.8 m/s² (acceleration due to gravity), and h = 55 m (height of the block from the ground)PE = mgh = (6 kg) (9.8 m/s²) (55 m) = 3,234 JTherefore, the gravitational potential energy of the block when it was released was 3,234 Joules (J).b) The kinetic energy of the block at the point of impact can be calculated using the formula; KE = ½mv²where m = 6 kg (mass of the block), and v = 30 m/s (velocity of the block)KE = ½mv² = ½ (6 kg) (30 m/s)² = 2,700 J.

Therefore, the kinetic energy of the block at the point of impact was 2,700 Joules (J).c) The law of conservation of energy states that energy cannot be created or destroyed, it can only be transformed from one form to another. At the point of impact, the block loses its kinetic energy. The mechanical energy "lost" by the block can be calculated as the difference between the initial potential energy and the final kinetic energy.

ΔE = PE - KE= (3,234 J) - (2,700 J) = 534 J

When the block hit the ground, it created a loud sound, generated heat, and also caused the ground to shake. Therefore, the mechanical energy that was "lost" by the block was transformed into sound energy, heat energy, and seismic energy.

To know more about sound energy visit :

https://brainly.com/question/18957233

#SPJ11

(a)

The acceleration of the 10 kg box is 2.5 m/s², the acceleration of the 20 kg box is 1.25 m/s², and the tension in the string is 25 N.

To determine the acceleration of each box and the tension in the string, we'll apply Newton's second law of motion, which states that the net force acting on an object is equal to the product of its mass and acceleration.

Let's consider the system of the two boxes together. The force of 50 N is applied to the 20 kg box. We'll assume the positive direction is to the right.

Using the free-body diagrams for each box:

For the 10 kg box:

- The tension in the string (T) acts to the right.

- The net force acting on the 10 kg box is T.

- Applying Newton's second law: T = m₁a₁, where m₁ is the mass of the 10 kg box.

- Substituting the values: T = 10 kg × a₁.

For the 20 kg box:

- The applied force (50 N) acts to the right.

- The tension in the string (T) acts to the left.

- The net force acting on the 20 kg box is 50 N - T.

- Applying Newton's second law: 50 N - T = m₂a₂, where m₂ is the mass of the 20 kg box.

- Substituting the values: 50 N - T = 20 kg × a₂.

Since the boxes are connected by a string, the tension in the string is the same for both boxes. Therefore, we can equate the two equations:

10 kg × a₁ = 50 N - T.

We also know that the acceleration of the 20 kg box is half of the acceleration of the 10 kg box:

a₂ = 0.5a₁.

Solving these equations simultaneously, we get:

10 kg × a₁ = 50 N - T.

20 kg × (0.5a₁) = 50 N - T.

Rearranging the second equation, we find:

10 kg × a₁ = 50 N - T.

Substituting this into the first equation:

10 kg × a₁ = 10 kg × a₁.

This implies that T = 50 N - T.

Simplifying, we find:

2T = 50 N.

T = 25 N.

Substituting the value of T into the first equation:

10 kg × a₁ = 50 N - 25 N.

10 kg × a₁ = 25 N.

a₁ = 2.5 m/s².

Substituting the value of a₁ into the second equation:

20 kg × (0.5 × 2.5 m/s²) = 50 N - 25 N.

20 kg × 1.25 m/s² = 25 N.

a₂ = 1.25 m/s².

The acceleration of the 10 kg box is 2.5 m/s², the acceleration of the 20 kg box is 1.25 m/s², and the tension in the string is 25 N.

(b)

The acceleration of each box is 1.25 m/s², and the tension in the string is 22.5 N.

In this case, we need to consider the additional force of kinetic friction acting on each box.

For the 10 kg box:

- The frictional force acts to the left.

- The net force acting on the 10 kg box is T - frictional force.

- Applying Newton's second law: T - frictional force = m₁a₁, where m₁ is the mass of the 10 kg box.

- The frictional force is given by the coefficient of kinetic friction (μ) multiplied by the normal force (m₁g), where g is the acceleration due to gravity.

- Substituting the values: T - μm₁g = 10 kg × a₁.

For the 20 kg box:

- The applied force (50 N) acts to the right.

- The frictional force acts to the left.

- The net force acting on the 20 kg box is 50 N - T - frictional force.

- Applying Newton's second law: 50 N - T - frictional force = m₂a₂, where m₂ is the mass of the 20 kg box.

- The frictional force is given by the coefficient of kinetic friction (μ) multiplied by the normal force (m₂g), where g is the acceleration due to gravity.

- Substituting the values: 50 N - T - μm₂g = 20 kg × a₂.

Since the boxes are connected by a string, the tension in the string is the same for both boxes. Therefore, we can equate the two equations:

10 kg × a₁ + μm₁g = 50 N - T - μm₂g.

We also know that the acceleration of the 20 kg box is half of the acceleration of the 10 kg box:

a₂ = 0.5a₁.

Solving these equations simultaneously, we get:

10 kg × a₁ + μm₁g = 50 N - T - μm₂g.

20 kg × (0.5a₁) + μm₂g = 50 N - T - μm₂g.

Rearranging the second equation, we find:

10 kg × a₁ + μm₁g = 50 N - T - μm₂g.

Substituting this into the first equation:

10 kg × a₁ + μm₁g = 10 kg × a₁.

This implies that T + μm₂g = 50 N.

Simplifying, we find:

T = 50 N - μm₂g.

Substituting the given values:

T = 50 N - (0.10)(20 kg)(9.8 m/s²).

T = 50 N - 19.6 N.

T = 30.4 N.

Substituting the value of T into the equation for a₁:

10 kg × a₁ + μm₁g = 50 N - T.

10 kg × a₁ + (0.10)(10 kg)(9.8 m/s²) = 50 N - 30.4 N.

10 kg × a₁ + 9.8 N = 19.6 N.

10 kg × a₁ = 19.6 N - 9.8 N.

10 kg × a₁ = 9.8 N.

a₁ = 0.98 m/s².

Substituting the value of a₁ into the equation for a₂:

a₂ = 0.5a₁.

a₂ = 0.5(0.98 m/s²).

a₂ = 0.49 m/s².

In the case where the coefficient of kinetic friction between each box and the surface is 0.10, the acceleration of each box is 0.98 m/s², and the tension in the string is 30.4 N.

To know more about tension , visit

https://brainly.com/question/24994188

#SPJ11

Answer:

Prefer Soil more than sand

Explanation:

Answer:

Well, if you look up countries with the highest birth rates, also those countries poverty rates and what class the majority of the people are in then you should have a better understanding. Also, education is not passed through genes it is learned through expirience and being taught. Also being rich vs being poor probably doesn't have that big of an effect either. It is the living conditions.

Explanation:

The forces shaping the short-term future of man, perhaps to the turn of this century, are apparent, and the events are in train. The shape of the world in the year 2000 and man's place therein will be determined by the manner in which organized humanity confronts several major challenges. If sufficiently successful, and mankind escapes the dark abysses of its own making, then truly will the future belong to man, the only product of biological evolution capable of controlling its own further destiny.

please mark in brain list

Answer:

electromagnet

Explanation:

mark me as brainlest

Answer:

Humans (which are omnivores) get their food from plants and other animals.

Some animals (omnivores) get their food from plants and other animals.

Some animals (carnivores) get their food from only other animals.

Some animals (herbivores) get their food from only plants.

Answer:

c

Explanation:

An atom acquires one or more electrons, which results in the formation of an ion with a negative charge known as an anion. Anions of elements in the second row are frequently utilised in chemical processes involving proton transfer and substitution.

Tetrahedral structures are seen by the oxyanions of second-row elements in their group oxidation states. Olivine minerals, also known as (Mg,Fe)₂SiO₄, contain tetrahedral SiO₄ units; nevertheless, the anion does not have a separate existence inside the mineral since the oxygen atoms in the solid state are surrounded tetrahedrally by cations.

Ate anions are extremely resistant to the loss of CH 3 because they have ionic connections between the core atom and the ligands, which are generated by elements that belong to the first three primary groups. Hypervalent anions, which are obtained from the other second-row elements, have predominantly covalent X-C bonding, which gives them (sometimes marginal) resistance to the effects of ligand loss. Hypervalent anions are obtained from the other second-row elements.

To know more about anions

https://brainly.com/question/28971609

#SPJ4

The question is incomplete as it does not provide options to choose from or any context. instead of this, I will explain how to improve communication skills. improving communication skills takes practice, self-awareness, and a willingness to learn and grow. By focusing on these key areas, you can improve your ability to communicate effectively with others in a variety of settings.

Communication skills refer to the ability to convey information effectively and efficiently to others, both verbally and non-verbally. Effective communication involves active listening, clarity of expression, and an understanding of the message being conveyed.

There are several ways to improve communication skills, including:

Practice: Communication skills can be improved through regular practice. Look for opportunities to communicate with others, and take the time to reflect on your communication style and how you can improve.

Active listening: Effective communication requires active listening skills. Pay attention to what others are saying and ask questions to clarify your understanding.

Nonverbal communication: Nonverbal cues such as body language, eye contact, and facial expressions can convey important messages. Practice being aware of and controlling your own nonverbal cues to enhance your communication skills.

Clarity of expression: Clearly expressing your ideas and thoughts is essential for effective communication. Practice organizing your thoughts and speaking clearly and concisely.

Empathy: Being able to put yourself in someone else's shoes and understand their perspective is an essential communication skill. Practice showing empathy by actively listening and acknowledging the other person's feelings.

Feedback: Seek feedback from others on your communication skills. This can help you identify areas for improvement and refine your communication style.

Therefore, It takes time, effort, self-awareness, and a commitment to learn and develop new abilities to improve communication. You can enhance your capacity to interact successfully with others in a range of circumstances by concentrating on five important areas.

To learn more about the difference between Communication

and Communication skills click:

https://brainly.com/question/29468743

#SPJ2

The normal force on the truck to the highway surface is 20,534 N. This force is necessary to balance the weight of the truck and provide the centripetal force required for it to move in a circular path around the curve.

To find the normal force on the truck, we need to consider the forces acting on it while rounding the curve.

The two significant forces involved are the gravitational force (weight) and the centripetal force.

1. Gravitational Force (Weight):

The weight of an object is given by the equation:

Weight = mass × acceleration due to gravity

For the truck:

Mass of the truck (m) = 2000 kg

Acceleration due to gravity (g) = 9.8 m/s²

Weight of the truck (W_truck) = m × g

                       = 2000 kg × 9.8 m/s²

       W_truck   = 19,600 N

2. Centripetal Force:

The centripetal force required to keep an object moving in a circular path is given by the equation:

Centripetal Force = (mass × velocity²) / radius

For the truck:

Mass of the truck (m) = 2000 kg

Velocity (v) = 61.1 mi/h = 27.28 m/s (converted to meters per second)

Radius of the curve (r) = 264 m

Centripetal Force (F_c) = (m × v²) / r

                                       = (2000 kg × (27.28 m/s)²) / 264 m

                                 F_c = 20,534 N

The normal force on the truck to the highway surface is 20,534 N.

This force is necessary to balance the weight of the truck and provide the centripetal force required for it to move in a circular path around the curve.

To know more about force visit:

https://brainly.com/question/2254109

#SPJ11

Answer:

On Bode's advice, Herschel named his newly discovered planet after: the Greek god Uranus.

Explanation:

Herschel named his newly discovered planet Uranus on Bode's advice for a couple of reasons:

Mythological Naming Convention: During that time, it was a common practice to name celestial objects after mythological figures, particularly gods from Greek and Roman mythology. Bode suggested following this convention and recommended that Herschel choose a name from Greek mythology for the newly discovered planet.

Connection to the Sky: Uranus was chosen as the name for the planet because it was the name of the Greek god of the sky. Given that Herschel had discovered a celestial object in the sky, naming it after the god associated with the sky seemed fitting.

By naming the planet Uranus, Herschel paid homage to the mythological tradition of naming celestial bodies while also establishing a connection between his discovery and the vastness of the sky.

Hope this helps!

Answer:

We know that the gravitational force between two objects of mass M1 and M2 that are at a distance R, is given by:

F = G*(M1*M2)/R^2

Where G is a constant.

If you reduce one of the masses, then the gravitational force between the objects will change.

So if we take un account the Earth and the Sun, when you reduce the mass of Earth, the force between Earth and the Sun will decrease, and this will change the orbit of the Earth around the Sun.

(The orbit also depends on the gravitational force between the Earth and the other planets in the system, and all those forces also change, which also has an impact in the orbit change)

Explanation:

I'm corona positive and isolated feeling depressed just logged in to talk someone but people ignoring me thanks for this behaviour got disappointed bye everyone logging out had a great time

The accelerometer measures acceleration, including the force of gravity. In a stationary position, the accelerometer should read an acceleration value close to 9.8 m/s² in the vertical direction (Ay axis) because it is sensing the gravitational force pulling downward.

The other two axes (Ax and Az) should be close to 0 since there is no significant movement or acceleration in those directions. On the other hand, a gyroscope measures angular velocity, which indicates rotational motion. In an ideal scenario, where the device is not experiencing any rotation, the gyroscope values should be essentially 0 on all three axes (X, Y, and Z).

When the device is rotated counterclockwise and then back clockwise, the gyroscope data will reflect the change in angular velocity. If the device is rotated counterclockwise, the gyroscope will detect a positive angular velocity along the corresponding axis. Conversely, if the device is rotated clockwise, the gyroscope will register a negative angular velocity. The gyroscope data values will indicate the magnitude and direction of the rotation, with positive values corresponding to counterclockwise rotation and negative values corresponding to clockwise rotation.

To learn more about accelerometer refer:

https://brainly.com/question/30327281

#SPJ11

Answer:

I = 1.666... amps

Explanation:

P = I*V or Power = Current * Voltage

(100 watts) = I * (60 Volts)

I = 1.666... amps