A solution in which the [H+] is 1.0 X 10-4 mol/L is said to be:

Answer:

the amount of trials in an experiment

The equation for the average, also known as the arithmetic mean, is:

D. Average = (sum of all data values) / (total number of data values)

The average is calculated by adding up all the data values and then dividing the sum by the total number of data values. This equation provides a measure of central tendency that represents the typical value or the "average" value of a set of data.

Option A, (total number of data values) / (sum of all data values), does not represent the correct equation for calculating the average. Dividing the total number of data values by the sum of all data values does not yield the average. This equation would result in a value that is not representative of the data set.

Option B, (sum of target data values) / (sum of all data values), is not the correct equation for calculating the average. This equation suggests finding the average of specific "target" data values rather than considering the entire data set.

Option C, (sum of target data values) / (total number of data values), is also not the correct equation for calculating the average. Similar to option B, this equation suggests finding the average of specific "target" data values rather than considering the entire data set.

Therefore, the correct equation for calculating the average is D. Average = (sum of all data values) / (total number of data values). This equation provides the most accurate representation of the average value of a given data set.

For more such question on arithmetic visit:

https://brainly.com/question/29796637

#SPJ8

Answer:

I am sure it is D or C. have a nice day

Answer:

-3169

Explanation:

trust the process

-3169 kJ/mol is the enthalpy of combustion when 1 mol [tex]C_6H_6(g)[/tex] completely reacts with oxygen.

Explanation:

Given:

The reaction of combustion of [tex]C_6H_6(g)[/tex] along with enthalpies of formation of the compounds.

To find:

The enthalpy of combustion when 1 mol [tex]C_6H_6(g)[/tex]  completely reacts with oxygen.

Solution:

[tex]2C_6H_6(g) + 15O_2(g) \rightarrow 12CO_2(g) + 6H_2O(g)[/tex]

Enthalpy of the reaction:

[tex]\Delta H^o_{rxn}=\sum [\Delta H^o_{f,products}]-\sum [\Delta H^o_{f,reactants}]\\=[12mol\times \Delta H^o_{f.CO_2(g)}+6mol\times \Delta H^o_{f,H_2O(g)}]-[2 mol\times \Delta H^o_{f.C_6H_6(g)}+15\times \Delta H^o_{f,O_2(g)}]\\=[12mol\times (-393.50 kJ/mol)+6mol\times (-241.82 kJ/mol)]-[2mol\times 82.90kJ/mol+15mol\times 0 kJ/mol]\\=-6338.72 kJ[/tex]

[tex]2C_6H_6(g) + 15O_2(g) \rightarrow 12CO_2(g) + 6H_2O(g).\Delta H^o_{rxn}=-6338.72 kJ[/tex]

When 1 mole of [tex]C_6H_6(g)[/tex]  reacts with oxygen gas:

[tex]=\frac{\Delta H^o_{rxn}}{\text{2 mol of } C_6H_6}\\=\frac{-6338.72 kJ}{2 mol}\\=-3169.36 kJ/mol\approx -3169 kJ/mol[/tex]

-3169 kJ/mol is the enthalpy of combustion when 1 mol [tex]C_6H_6(g)[/tex] completely reacts with oxygen.

Learn more about enthalpy of combustion here:

brainly.com/question/10583725?referrer=searchResults

brainly.com/question/4075722?referrer=searchResults

OPTION C is the correct answer.

Answer:

Option A.

Explanation:

1 mol of anything contains 6.02×10²³ particles.

We know that 1 mol of oxygen gas contains 2 moles of O.

1 mol of oxygen weighs 16 g/mol, the mass for 1 molecule of O.

By the way, the mass for 1 mol of O₂ may be:

Option A  →  16 g/mol . 2 mol

32 g

Oyxgen is a dyatomic molecule, that's why we have 2 moles of O.

Another example can be:

1 mol of water (H₂O) contains 2 moles of H and 1 mol of O.

Answer:

NITRATE ION

Explanation:

Answer:

The answer will be Number C that is positively and part of the nucleus

Answer:

Part C best describes a proton, as it is positively charged and part on the nucleus

Answer:

All 3

Explanation:

Decomposers break apart complex organic materials into more elementary substances: water and carbon dioxide, plus simple compounds containing nitrogen, phosphorus, and calcium. All of these components are substances that plants need to grow.

Some decomposers are specialized and break down only a certain kind of dead organism. Others are generalists that feed on lots of different materials. Thanks to decomposers, nutrients get added back to the soil or water, so the producers can use them to grow and reproduce.

Answer:

23, 51

Explanation:

Edmentum/plato

As per the balanced reaction, 2 moles of aluminum metal and 3 moles of copper nitrate gives 2 moles of aluminum nitrate and 3 moles of copper metal.  10 g  of Al and 25g of copper nitrate gives 0.08 moles of aluminum nitrate and 0.13 moles of copper.

A limiting reactant is the reacting species which is not sufficient in amount to complete the reaction. Hence, the limiting reactant determines the yield of the reaction.

The given reaction is written as:

[tex]\rm 3Cu(NO_{3})_{2} + 2Al \rightarrow 2 Al(NO_{3})_{3} + 3Cu[/tex]

2 moles of Al and 3 moles of copper nitrate gives 2 moles of aluminum nitrate and 3 moles of Cu.

Molar mass of copper nitrate = 187.5 g/mol

atomic mass of aluminum = 27 g/mol

then, number of moles in 10 g of Al = 10 g/27 g/mol = 0.37 moles.

number of moles in 25 g of copper nitrate = 25 g/187.5 g/mol = 0.13 moles.

0.37 moles of Al needs 0.5 moles of copper nitrate to react with. Hence, copper nitrate is the limiting reactant.

3 moles of copper nitrate gives 2 moles of aluminum nitrate. Then 0.13 moles will give 2/3rd of 0.13 i e., 0.08 moles of aluminum nitrate. Similarly 0.13 moles copper nitrate gives 0.13 moles of copper metal.

Find more on limiting reactant:

https://brainly.com/question/14225536

#SPJ7

Your question is incomplete. But your complete question probably was:

10 g of aluminum metal reacts with 25 g of copper nitrate. Use the periodic table to determine the amount of copper and aluminum nitrate formed in the reaction.

In the reaction,

moles of Cu and

moles of Al(NO3)3 are formed.

Answer:

80.7 °C

Explanation:

Step 1: Given and required data

Step 2: Calculate the final temperature of the water

We will use the following expression.

Q = c × m × (T₂ - T₁)

T₂ = Q / c × m + T₁

T₂ = -1,200 J / (4.184 J/g.°C) × 20.0 g + 95.0 °C = 80.7 °C

Answer:

81 C

Explanation:

Answer:

40.7g

Explanation:

so mass = moles × mr( 6.94+16+1)

=1.7 × 23.94

= 40.698

so 3 S.F = 40.7 g

hope this helps :)

Answer:

false

Explanation:

it happens in light-independent reactions

Answer: hello your question has some missing data attached below is the missing data

answer:

i) volumetric flow rate = 168 m^3/h = 5932.86 ft^3/h

ii) n = 582.4 Ib mole/hr

Explanation:

Given that the volumetric flow rate is a Linear function of R

V = ∝R + β

where; R1 = 15 , V1 = 40 m/h , R2 = 50, V2 = 96 m/h  input values into equation above

40 = 15∝ + β ----- ( 1 )

96 = 50∝ + β ----- ( 2 )

resolve equations 1 and 2 simultaneously

56 = 35∝ + 0

∴ ∝ = 56 / 35 = 1.6

back to equation 1:  40 = 15(1.6) + β    ∴ β = 40 - 24 = 16

hence ; V = 1.6(95) + 16 = 168 m^3/h = 5932.86 ft^3/h

lets assume room temperature

density of water = 62.4 Ib/ft^3

molecular weight of water = 18

therefore n = ( 62.4 / 18 ) * 168

                  = 582.4 Ib mole/hr

Answer:

pure

Explanation:

Distilled water is a form of pure water, hence it is not bad or harmful to drink distilled water.

Answer:

I think it's pure. hope this helps◉‿◉

Answer:

on image

Explanation:

Answer:

divergence of continental crust

Explanation:

Answer:

A

not sure of answer ndhfhfjfjcjfjfj

so dfhhdjdjjfjfjjdjdjdj

Answer:

C-HOC6H12OH and HOOCCH.COOH

hexane-1,6-diol and propane-1,3-dioic acid

Answer:

ΔH = 283kJ/mol

Explanation:

Using Hess's law, the ΔH of a reaction is equal to the sum of ΔH° of products times its coefficient subtracting the sum of ΔH° of reactants times its coefficient. Replacing, for the reaction:

ΔH = 2ΔH°C + 2ΔH°D - (2ΔH°A+ΔH°B)

ΔH = 2*193kJ/mol + 2*-493kJ/mol - (2*-235kJ/mol+ (-413kJ/mol)

Answer:

neom, sodium bicarbonate

Answer:

See explanation

Explanation:

Electro negativity refers to the ability of an atom in a molecule to attract the shared pair of electrons of a bond closer to itself.

In a molecule, the polarity of bonds is determined by the relative electro negativity of the bonding atoms. If the difference in electro negativity between the atoms in a bond is significant, such a bond is polar in nature e.g H-Cl, H-Br, C-F, etc.

However, the occurrence of polar bonds in a molecule alone does not guarantee the polarity of the molecule. The polarity of a molecule also depends on the shape of the molecule since dipole moment is a vector quantity.

A molecule is polar when the resultant dipole moment which is determined by the shape of the molecule is non zero.

For instance, CO2 contains two polar C-O bonds but the molecule is non polar because the two dipole moments cancel out. Also, symmetrical molecules are nonpolar irrespective of the presence of polar bonds in the molecule.

Answer:

a lot but im pretty sure if u just take avogadros number and multiply it by 9.8 u get the answer

Explanation:

There are 5.89 × 10²⁴ atoms in 9.8 moles on NaCl. Details about number of atoms can be found below.

The number of atoms of a compound can be calculated by multiplying the number of moles of the substance by Avogadro's number.

no of atoms = no of moles × 6.02 × 10²³

According to this question, there are 9.8 moles of NaCl.

no of atoms = 9.8 × 6.02 × 10²³

no of atoms = 5.896 × 10²⁴

Therefore, there are 5.89 × 10²⁴ atoms in 9.8 moles on NaCl.

Learn more about number of atoms at: https://brainly.com/question/8834373

#SPJ2

Answer:

1.08 M

Explanation:

From the question given above, the following data were obtained:

Initial volume (V₁) = 45 mL

Initial concentration (C₁) = 6 M

Final volume (V₂) = 250 mL

Final concentration (C₂) =?

The final concentration of the solution can be obtained by using the dilution formula as illustrated below:

C₁V₁ = C₂V₂

6 × 45 = C₂ × 250

270 = C₂ × 250

Divide both side by 250

C₂ = 270 / 250

C₂ = 1.08 M

Therefore, the final concentration of the solution is 1.08 M.

Mass and volume are two factors that affect that density of matter!

Answer:

nsksbsjensnsjeiejensbsksks