A scientist observes the cells of a newly discovered animal under a
microscope. Which of the following cell parts is the scientist likely to find?
A. Cell membrane, chloroplasts, and a nucleus
B. Cell wall, cell membrane, and ribosomes
O C. Cell wall, chloroplasts, and lysosomes
D. Cell membrane, ribosomes, and a nucleus​

Answer:

[tex]28.037\ \text{s}[/tex]

Explanation:

[tex][A]_0[/tex] = Initial concentration = 1.28 M

[tex][A][/tex] = Final concentration = [tex]0.17[A]_0[/tex]

k = Rate constant = 0.0632 s

t = Time taken

For first order reaction we have the relation

[tex]kt=\ln\dfrac{[A]_0}{[A]}\\\Rightarrow t=\dfrac{\ln\dfrac{[A]_0}{[A]}}{k}\\\Rightarrow t=\dfrac{\ln\dfrac{[A]_0}{0.17[A]_0}}{0.0632}\\\Rightarrow t=28.037\ \text{s}[/tex]

Time taken to reach the required concentration would be [tex]28.037\ \text{s}[/tex].

Answer:

0.2878 liters

Explanation:

It is possible to make 0.2878 liters of 4 M solution of lithium bromide using 100 grams of the compound.

Answer:

5. C

6. B

Explanation:

sana nakatulong

Archaebacteria do not have a nucleus and the probability of their presence on skin is very low.

They are divided into thermoacidophiles, halophiles, and methanogens.

Archaeal 16 S rRNA genes were found on the skin of every human subject, contributing for up to 4.23 percent of the recovered prokaryotic microbiome.

To learn more about archaebacteria, nucleus, and peptidoglycan here,

https://brainly.com/question/2598723

#SPJ3

answerA) 100 mL

Explanation:

At constant temperature and number of moles, Using Boyle's law  

Given ,  

V₁ = 200 mL

V₂ = ?

P₁ = 60 kPa

P₂ = 120 kPa

The new volume of the gas is 100mL

Boyle's law is use to calculate the volume of a gas in relation with its pressure. The Boyle's law equation is as follows:

P1V1 = P2V2

Where;

P1 = initial pressure of the gas (torr)

P2 = final pressure of the gas (torr)

V1 = initial volume of the gas (mL)

V2 = final volume of the gas (mL)

According to the information of this question, the pressure on 200mL of a gas changed from 380 torr to 760 torr. Hence;

V1 = 200mL

V2 = ?

P1 = 380torr

P2 = 760torr

Using P1V1 = P2V2

V2 = P1V1/P2

V2 = (380 × 200) ÷ 760

V2 = 76000 ÷ 760

V2 = 100mL

Hence, the new volume of the gas is 100mL

Learn more: https://brainly.com/question/22467228

Answer:

26.9L of SO2

Explanation:

The reaction between Sulphur and oxygen is as follows:

[tex]S_2 + 2O_2 \to 2SO_2[/tex]

This implies that:

2 moles of oxygen reacts with 1 mole of sulphur to produce 2 moles of SO₂

2 moles of oxygen also yields 2 moles of SO₂

The number of moles of oxygen given is determined as:

[tex]= 26.9 \ L \ of \ O _2 \times (\dfrac{1 \ mol \ of O_2 }{22.4 \ L}) \\\\ = 1.20 \ mol \ of \ O_2[/tex]

The number of moles of SO₂ by using the ratio is:

[tex]= 1.20 \ mol \ of \ O_2 \times (\dfrac{1 \ mol \ of \ SO_2 }{1 \ mol \ O_2}) \\ \\ = 1.20 \ mol \ of SO_2[/tex]

Finally, the volume by applying the new moles is computed as:

[tex]= 1.20 \ moles \ of \ O_2 \times ( \dfrac{1 \ mo \ of \ SO_2}{1 \ mol \ of O_2}) \times ( \dfrac{22.4 }{1 \ mol }) \\ \\ = 26.9 \ L \ of \ SO_2[/tex]

Transition metal ions tends to absorb light in the visible range.

Transition metal is defined as an element having a d subshell that is partially filled with electrons, or an element that has the ability to form stable cations with an incompletely filled d orbital.

The transition metals are located towards the middle of the periodic table between the highly reactive metals and the noble gases.

They are the only elements that may use electrons in the next to highest—as well as the highest—energy level as valence electrons.

Transition metals are unusual in having very similar properties even with different numbers of valence electrons.

Therefore, Transition metal ions tends to absorb light in the visible range.

Learn more about Transition metals, here:

https://brainly.com/question/29828769

#SPJ2

Answer:

92.344mL

Explanation:

acording to boyle's law that PV=constant then P1V1=P2V2

Answer:

A) –7.8944×10-13 J/atom

Explanation:

Mass defect of a radionuclide (m)

[tex]=-8.7839[/tex]×[tex]10^{-30} kg[/tex]

Formula for binding energy

[tex]E=mc^{2}[/tex]

   [tex]=(-8.7839x10^{-30} kg)(3x10^{8} m/s)^{2}[/tex]

[tex]E=-7.8944x10^{-13} J/atom[/tex]

If the mass defect for a radionuclide is – 8.7839 × 10⁻³° kg, the binding energy per atom will be –7.8944 × 10⁻¹³  J/atom. The correct option is A.

A radionuclide is an unstable nuclide because it contains so much charge. The excess energy is used by the gamma radiation by the nucleus, the electron uses energy to move to another orbital.

Radionuclides are particles that are used to scanning or monitor the radioactive chemicals that are in the body due to swallowing or inhaling.

The binding energy per atom can be calculated by the formula

The mass of defect of a radionuclide (m) is – 8.7839 × 10⁻³° kg

E = mc²

E =  – 8.7839 × 10⁻³° x 3 x 10⁸ m/s

E = –7.8944 × 10⁻¹³  J/atom.

Thus, the correct option is A. –7.8944×10-13 J/atom.

To learn more about radionuclides, refer to the link:

https://brainly.com/question/14605156

#SPJ2

Answer:

D

Explanation:

D is the answer because 2 is needed to know

Answer:

B) 3 and 7

Explanation:

i just took the test

Answer:

λ Represents:-

-TheUnknownScientist

Solution :

When non volatile solute is added to solvent, vapor pressure gets lowered.

Relative lowering in vapor pressure is given :

[tex]$\frac{P^0-P}{P^0}$[/tex]   = [tex]$\text{mole fraction}$[/tex] of solute

[tex]$\frac{P^0-P}{P^0}=x_B$[/tex]

[tex]$P^0$[/tex] = vapor pressure of pure solvent

P = vapor pressure of solution

[tex]$x_B$[/tex] = mole fraction of solute

[tex]$x_B=\frac{n_B}{n_A+n_B}$[/tex]

[tex]$n_B $[/tex] = [tex]$\text{number of moles of solute}$[/tex]

[tex]$n_A$[/tex] = [tex]$\text{number of moles of solvent}$[/tex]

Number of moles [tex]$=\frac{\text{weight}}{\text{molecular weight}}$[/tex]

[tex]$\frac{P^0-P}{P^0}=\frac{w_B/M_B}{w_A/M_A+w_B/M_B}$[/tex]

            [tex]$\approx \frac{w_B/M_B}{w_A/M_A}$[/tex]

1. For 10 g of [tex]$CH_3COOK$[/tex]

         [tex]$CH_3COOK \rightarrow CH_3COO^- + K^+$[/tex]

  Ions = 2

It will affect colligative property.

[tex]$\frac{P^0-P}{P^0} = \frac{i \times 10/98}{w_A/M_A}$[/tex]

Relative lowering in vapor pressure will be :

[tex]$=\frac{2 \times 10/98}{w_A/M_A}$[/tex]

[tex]$=\frac{0.20}{w_A/M_A}$[/tex]

2. For 20 g sucrose

Sucrose is non electrolyte, i = 1

[tex]$\frac{P^0-P}{P^0} = \frac{ 20/342}{w_A/M_A}$[/tex]

            [tex]$=\frac{0.050}{w_A/M_A}$[/tex]

3. For 20 g of glucose.

   Glucose is a non electrolyte, i = 1

   [tex]$\frac{P^0-P}{P^0} = \frac{20/180}{w_A/M_A}$[/tex]

               [tex]$=\frac{0.11}{w_A/M_A}$[/tex]

[tex]$w_A/M_A$[/tex] is same in all three solutions.

Hence, lowering in vapor pressure is maximum in [tex]$CH_3COOK$[/tex] and minimum is Sucrose.

Vapor pressure from lowest to highest.

10 g of [tex]$CH_3COOK$[/tex] < 20 g of glucose < 20 g of sucrose

The pressure exerted by vapor to the other gas is called vapor pressure.

The formula used to solve the question is as follows:-

[tex]\frac{P^o -P}{P^o}[/tex]

The water vapor depends on the following:-

After solving the equation, the correct sequence is as follows:-

[tex]CH_3COOK > GLUCOSE > SUCROSE[/tex]

For more information, refer to the link:-

https://brainly.com/question/22810476

Answer: The volume is 8.94 L.

Explanation:

Given: no. of moles = 0.350 mol,   Pressure = 0.980 atm

Temperature = [tex]32^{o}C = (32 + 273) K = 305 K[/tex]

Formula used to calculate the volume is as follows.

PV = nRT

where,

P = pressure

V = volume

n = number of moles

R = gas constant = 0.0821 L atm/mol K

T = temperature

Substitute the values into above formula as follows.

[tex]PV = nRT\\0.980 atm \times V = 0.350 mol \times 0.0821 L atm/mol K \times 305 K\\V = 8.94 L[/tex]

Thus, we can conclude that the volume is 8.94 L.

Answer:

yes

Explanation:

cuz is a square and if all angles are equal of a square then it is correct

The partial pressure of Xe in the mixture is 1.850 atm. (partial pressure of Xe = Total pressure - Partial pressure of He - Partial pressure of Ar = 1.850 atm).

To find the partial pressure of Xe, we need to subtract the partial pressures of He and Ar from the total pressure.

Total pressure = partial pressure of He + partial pressure of Ar + partial pressure of Xe

Given:

Total pressure = 2.40 atm

Partial pressure of He = 0.300 atm

Partial pressure of Ar = 0.250 atm

Let's solve for the partial pressure of Xe:

Partial pressure of Xe = Total pressure - Partial pressure of He - Partial pressure of Ar

Partial pressure of Xe = 2.40 atm - 0.300 atm - 0.250 atm

Partial pressure of Xe = 1.850 atm

Therefore, the partial pressure of Xe in the mixture is 1.850 atm.

To learn more about partial pressure of Xe  here

https://brainly.com/question/34136076

#SPJ2

Solar energy:-

In this way the energy generated through sun light with the help of solar panels and to be used in many works.

Wind energy:-

This is generated by moving turbines with windmills .It is used to create electric energy

Answer: I'm not sure what your question is but i'll answer as best as I can.

Explanation:

Since X is equal to 7 H and we know that H is equal to 1.008, we can just do 7x1.008 = 7.056 g. I hope i helped and please clarify more in the future.

The atomic mass of an element is given by the sum of the mass of protons and neutrons. The element X is lithium as it has a mass of 6.941 u.

Atomic mass is the sum of the masses of the isotopes of that element and is given by adding the masses of the number of protons and neutrons of the elemental atom.

The atomic mass of one hydrogen atom is 1.008, so seven hydrogens will be, 7 x 1.008 = 7.056 g. Now, from the periodic table, it can be seen that an atomic mass of 7.056 g is closest to the atomic mass of a lithium atom (6.941 u).

From the mass, it can be said that seven hydrogen atom has an equivalent mass as that of one lithium atom in the periodic table. The lithium atom has atomic number 3 and an atomic mass of 6.941 g/mol.

Therefore, element X is lithium.

Learn more about atomic mass here:

https://brainly.com/question/17067547

#SPJ5

Answer:

This reaction has infinite ways to be balanced

Explanation:

To balance this equation we can use the algebraic method:

N2O4(g) + CO → NO(g) + CO2(g)+NO2(g)

Where we write each molecule as a letter:

A + B → C + D + E

Then, we write the equations according the number of atoms of each molecule. That is:

Oxygen → 4A + B = C + 2D + 2E (1)

Nitrogen → 2A = C + E (2)

Carbon → B = D (3)

Then, we have to give 1 arbitral number for a letter. For example:

B = 1; D = 1

(1) 4A + 1 = C + 2 + 2E

4A = C + 2E + 1

2A = C + E (2) Twice (2):

4A = 2C + 2E

Subtracting (1) in (2)

C + 2E + 1 = 2C + 2E

C + 1 = 2C

1 = C

Si 1 = C:

4A + 1 = 1 + 2 + 2E

4A = 2 + 2E (1)

y:

2A = 1 + E (2)

Twice:

4A = 2 + 2E

As (1) and (2) are the same equation:

For example:

N2O4(g) + CO → NO(g) + CO2(g)+NO2(g)

Answer:

A. it allows results to be reviewed and reproduced by other scientists.

Answer:

answer is B. Electricity cools down devices as it travels through them

Explanation

Answer:

10 molecules of NH₃.

Explanation:

N₂ + 3H₂ --> 2NH₃

As the N₂ supply is unlimited, what we need to do to solve this problem is convert molecules of H₂ into molecules of NH₃. To do so we use the stoichiometric coefficients of the balanced reaction:

10 NH₃ molecules could be prepared from 15 molecules of H₂ and unlimited N₂.  

According  to law of conservation of energy, the statement which is false is kinetic energy is the energy associated with its position or composition.

According to law of conservation of energy, it is evident that energy is neither created nor destroyed rather it is restored at the end of a chemical reaction .

Law of conservation of mass and energy are related as mass and energy are directly proportional which is indicated by the equation E=mc².Concept of conservation of mass is widely used in field of chemistry, fluid dynamics.

Learn more about law of conservation of energy,here:

https://brainly.com/question/28711001

#SPJ6

Answer:

refer to below

Explanation:

- read your textbook! especially the topics that are most confusing

- as you read, make sure to take notes/make an outline. write the words from the text in your own words. In chem, the textbook explanations are usually very detailed, so putting it in your own words will help you remember and understand what you write.

- make sure you really understand the concepts. don't just memorize what you read.

- draw diagrams and structures. seeing how things are structured will help you visualize what you learn

- ask questions to your teacher. if there is anything confusing, make sure to refer to your teacher as they will hopefully be able to explain it so  it won't be confusing

These tips have helped me pass chem with an A. Hope all of this helped!

Answer:

Explanation:

Study material, ask for help, read textbook and do practice problems, get a tutor, beg your teacher for marks,

Answer:

it will be the same on both sides of the membrane

When the pure water is separated from the aqueous sugar solution when the sugar cannot pass through the semipermeable membrane. So the water moves through the membrane to the sugar solution. Therefore, the concentration of sugar solution will be decreased.

Osmosis can be described as the spontaneous net movement or diffusion of solvent molecules through a permeable membrane from a region of lower solute concentration to a higher solute concentration in a direction that tends to balance the solute concentrations on both sides.

A physical process in which any solvent moves across a selectively permeable membrane separating two solutions of different concentrations.

Osmotic pressure can be described as the external pressure needed to be applied so that there is no net movement of a solvent across the membrane. Osmotic pressure can be defined as a colligative property because it depends on the molar concentration of the solute but not on its identity.

Therefore, option (A) is correct.

Learn more about osmosis, here:

https://brainly.com/question/1799974

#SPJ2

Answer:

because dark colours like black attract light (sun) and heat. light colors reflect more light, (it absorbs less energy and heat from the sun)

Answer:

Because Black color absorbs light better than light-colored.

for example have you ever seen the black car on the road if you touch it very hotter than white car

1. White is the most reflective color. Does not absorb heat like black Make the house not hot.

2. White has the least radiation exposure. Therefore, during the winter night, it will help retain heat for a while. 3. Because white absorbs light as little as possible. Causing the pigment to deteriorate slowly Unlike black that absorbs light well. Causing the color to deteriorate and fade quickly until noticeable

4. If the house next to you is painted white during the day, it will help reflect light into the house.

Why that black color absorbs heat? Even though it abosrbs the light? It comes from the principle that (Substance or material) Black is what absorbs (absorbs) light in every technology.

It absorbs all widths of light, including infrared light. (The infrared itself is hot.)

Black repels self-heating the most because of all colors of light. But there is justice.

Answer: c????????

Explanation:

Answer:

The glass ball was moved into the dark, and there is more carbon in the water.

Explanation:

Reza has a glass ball filled with water that contains tiny plants and shrimp that eat those plants. No material can get in or out, but light can get through the glass when it is placed in sunlight.

The number of energy storage molecules in the plants and shrimp started out high, but then the glass ball was moved, and the number of energy storage molecules decreased. Was the glass ball moved into the light or into the dark? What happened to the amount of carbon in the water?

The glass ball was moved into the dark and the amount of carbon increased in water as there is no photosynthesis taking place.

It is defined as a process by which plants and other photosynthetic organisms convert the light energy in to chemical energy  through the process of cellular respiration.

Some of the energy which is converted  is stored in molecules of carbohydrates like sugar and starches  which are made up of from carbon dioxide and water . Photosynthetic organisms which can perform photosynthesis  are algae and cyanobacteria. Photosynthesis is largely responsible for producing and maintaining the content of oxygen in earth's atmosphere.

The process begins with proteins absorbing light energy  which are called reaction centers and contain a green pigment which is called chlorophyll . In plants ,these pigments are present inside organelles called chloroplasts while in bacteria they are present in plasma membrane.

Learn more about photosynthesis,here:

https://brainly.com/question/29764662

#SPJ2

Answer:

dog 2 because it is running 1m faster a second than dog 1. Dog 2 can run 1 meter farther in a second than the other dog.

Answer:

Creo que es D pero no tan segura

Explanation:

Answer:

Age ≅ 7500 years

Explanation:

All radioactive decay is 1st order kinetics and described by the expression

A = A₀e^-kt => t = ln(A/A₀) / -k

k = 0.693 / t(half life) = (0.693 / 5730)yrs⁻¹ = 1.21 x 10⁻⁴ yrs⁻¹

t = Age = [ln(0.103/0.255) / - 1.21 x 10⁻⁴] yrs = 7500 years