a saturated aqueous solution of calcium hydroxide (strong base) is approximately 0.13alcium hydroxide, by mass, and has a density of 1.02 g/ml. calculate the ph of this solution.

To complete and balance the following redox reactions in acidic and basic solutions, here are the balanced equations with proper phases for each species involved:

Redox reaction in acidic solution:

[tex]TeO_{2}(aq) + N_{2}O(g) = Te(s) + NO(g)[/tex]

Redox reaction in basic solution:

[tex]Cr2O_{72-}(aq) + Hg(0) = Hg_{2+} (aq) + Cr_{3+} (aq)[/tex]

Redox reaction in basic solution:

[tex]ReO_{4_}(aq) + Pb_{2+} (aq) = Re(s) + PbO_{2} (s)[/tex]

Redox reactions, also known as oxidation-reduction reactions, involve the transfer of electrons between chemical species. In a redox reaction, one species undergoes oxidation, which involves the loss of electrons, while another species undergoes reduction, which involves the gain of electrons.

The species that undergoes oxidation is called the reducing agent or reductant because it donates electrons, while the species that undergoes reduction is called the oxidizing agent or oxidant because it accepts electrons. Redox reactions involve a simultaneous occurrence of both oxidation and reduction.

For more details regarding redox reactions, visit:

https://brainly.com/question/28300253

#SPJ12

Answer:

Volume = 205

Explanation:

Using; PV = nRT

P (Pressure) = 0.634atm

V (Volume) = ?

n (Number of moles) = 4.56mol

R (Universal Gas Constant) = 0.082

T (Absolute Temperature) = 75+273 = 348K

0.634 × V = 4.56 × 0.082 × 348

V = 130.12416 ÷ 0.634

V = 205

The first  carbon in each glucose molecule has a linear molecular geometry; the second carbon in each glucose molecule has trigonal pyramidal molecular geometry; the third carbon has a tetrahedral molecular geometry; the fourth carbon has trigonal planar molecular geometry; and, the fifth carbon has tetrahedral molecular geometry.

The molecular geometry of maltose is complex due to the presence of multiple carbon atoms and different types of bonds.

Maltose is a disaccharide made up of two glucose molecules linked together by a glycosidic bond. Each glucose molecule has five carbon atoms. The molecular geometry around each carbon atom in maltose depends on the types of bonds and the number of lone pairs of electrons on each carbon.

a) The first carbon in each glucose molecule is part of a linear chain of atoms, so it has a linear molecular geometry.

b) The second carbon in each glucose molecule is bonded to three other atoms (two carbons and one oxygen) and has one lone pair of electrons. This arrangement results in a trigonal pyramidal molecular geometry.

c) The third carbon in each glucose molecule is bonded to four other atoms (three carbons and one oxygen) and has no lone pairs of electrons. This arrangement results in a tetrahedral molecular geometry.

d) The fourth carbon in each glucose molecule is bonded to three other atoms (two carbons and one oxygen) and has one lone pair of electrons. This arrangement results in a trigonal planar molecular geometry.

e) The fifth carbon in each glucose molecule is bonded to four other atoms (three carbons and one oxygen) and has no lone pairs of electrons. This arrangement also results in a tetrahedral molecular geometry.

To learn more about molecular geometry of maltose, visit: https://brainly.com/question/31044827

#SPJ11

The vapor pressure of water at 25°C (298 K) is approximately 606.8 atm, b- the standard free energy change for the change H2O(l) → H2O(g) is -32.5 kJ/mol.

To calculate ∆G°298 for the change H2O(l) → H2O(g), we need to use the following thermodynamic equation:

∆G°298 = ∆H°298 - T∆S°298

where ∆H°298 is the standard enthalpy change, ∆S°298 is the standard entropy change, and T is the temperature in Kelvin.

First, we need to calculate ∆S°298 for the change H2O(l) → H2O(g). We can use the Clausius-Clapeyron equation:

ln(P2/P1) = (∆Hvap/R)(1/T1 - 1/T2)

where P1 is the vapor pressure of water at temperature T1, P2 is the vapor pressure of water at temperature T2, ∆Hvap is the enthalpy of vaporization of water, R is the gas constant (8.314 J/mol*K), and T1 and T2 are the temperatures in Kelvin.

We are given that the vapor pressure of water at 20°C (293 K) is 17.54 torr. We can convert this to atmospheres (atm) by dividing by 760 torr/atm:

P1 = 17.54/760 = 0.023 atm

We are also given ∆Hvap = 40.65 kJ/mol. Converting this to J/mol and dividing by R gives:

(40.65 * 1000 J/mol) / (8.314 J/mol*K) = 4891 K

using this value, along with T1 = 293 K and T2 = 298 K, we can solve for ln(P2/P1)

ln(P2/0.023) = (4891 K)(1/293 K - 1/298 K)

ln(P2/0.023) = 26.84

P2/0.023 =e(26.84)

P2 = 606.8 atm

Next, we can calculate ∆S°298 using the equation:

∆S°298 = ∆H°vap/T + R ln(P2/P1)

∆S°298 = (40.65 * 1000 J/mol) / (298 K) + 8.314 J/mol*K * ln(606.8/0.023)

∆S°298 = 109.0 J/mol*K

Now we can plug in the values for ∆H°298 and ∆S°298, along with T = 298 K, into the equation for ∆G°298:

∆G°298 = ∆H°298 - T∆S°298

∆G°298 = (0 kJ/mol) - (298 K)(109.0 J/mol*K)

∆G°298 = -32.5 kJ/mol

learn more about standard free energy here:

https://brainly.com/question/15876696

#SPJ11

Based on the given H NMR chemical shift data, we can match the compounds as follows:
Compound A (δ 3.2 and δ 12.4) corresponds to malonic acid (HO2CCH2CO2H), as the two singlets result from the two chemically equivalent methylene (CH2) protons and the two carboxylic acid (CO2H) protons.

Compound B (δ 6.3 and δ 12.4) corresponds to maleic acid (cis-HO2CCH=CHCO2H). The signal at δ 6.3 is due to the two equivalent vinylic protons (CH=CH), while the signal at δ 12.4 results from the two carboxylic acid (CO2H) protons.

Compound C (δ 8.0 and δ 11.4) corresponds to formic acid (HCO2H). The signal at δ 8.0 arises from the single aldehyde proton (CH), and the signal at δ 11.4 is attributed to the carboxylic acid (CO2H) proton.

To know more about chemical shift click here:

https://brainly.com/question/30579222

#SPJ11

The order of increasing nucleophilicity in acetone is [tex]CH_3OH (b) < CH_3NH_2 (c) < CH_3SH (a).[/tex]

In acetone, the nucleophilicity of a species depends on its ability to donate a pair of electrons and react with an electrophile. The three species to consider are [tex]CH_3SH (a), CH_3OH (b), and CH_3NH_2 (c)[/tex]. To rank them in order of increasing nucleophilicity, we need to analyze their electron-donating abilities, which are influenced by factors such as the size of the atom, electronegativity, and the stability of the conjugate base.

a. [tex]CH_3SH[/tex]: The sulfur atom in [tex]CH_3SH[/tex] is larger and less electronegative than oxygen and nitrogen. This makes the electron cloud more dispersed, allowing it to donate electrons more easily.

b. [tex]CH_3OH[/tex]: The oxygen atom in [tex]CH_3OH[/tex] is more electronegative than sulfur and nitrogen. However, it is a relatively small atom, which leads to a higher electron density around the oxygen, resulting in reduced nucleophilicity compared to [tex]CH_3SH[/tex].

c. [tex]CH_3NH_2[/tex]: The nitrogen atom in [tex]CH_3NH_2[/tex] is less electronegative than oxygen but more electronegative than sulfur. It is also smaller than sulfur, resulting in a more concentrated electron cloud. However, its lower electronegativity compared to oxygen makes it a better nucleophile than [tex]CH_3OH.[/tex]

In conclusion, the order of increasing nucleophilicity in acetone is as follows: [tex]CH_3OH (b) < CH_3NH_2 (c) < CH_3SH (a).[/tex] This means that [tex]CH_3SH[/tex] is the strongest nucleophile among the three species, while [tex]CH_3OH[/tex] is the weakest.

For more such questions on Nucleophilicity.

https://brainly.com/question/29563504#

#SPJ11

The balanced net ionic equation for the reaction of NiBr2(aq) with (NH4)2S(aq) is:

Ni2+(aq) + S2-(aq) → NiS(s)

Note that the spectator ions NH4+ and Br- do not participate in the reaction and are not included in the net ionic equation.

Spectator ions are ions that do not participate in a chemical reaction, meaning they do not undergo any chemical change during the reaction. They are present in both the reactants and the products and do not affect the outcome of the reaction.

Spectator ions can be identified by looking at the balanced chemical equation of the reaction and canceling out ions that appear on both sides of the equation.

Visit here to learn more about spectator ions brainly.com/question/28913274

#SPJ11

The balanced net ionic equation for the reaction of NiBr2(aq) with (NH4)2S(aq) is:

Ni2+(aq) + S2-(aq) → NiS(s)

Note that the spectator ions NH4+ and Br- do not participate in the reaction and are not included in the net ionic equation.

Spectator ions are ions that do not participate in a chemical reaction, meaning they do not undergo any chemical change during the reaction. They are present in both the reactants and the products and do not affect the outcome of the reaction.

Spectator ions can be identified by looking at the balanced chemical equation of the reaction and canceling out ions that appear on both sides of the equation.

Visit here to learn more about spectator ions brainly.com/question/28913274

#SPJ11

Thus, 0.19 mol or 190 mmol of NaOH will react completely with 50 mL of 1.9 M H2C2O4.

To determine how many mmol of NaOH will react completely with 50 mL of 1.9 M H2C2O4, we first need to find the mmol of H2C2O4:

moles of H2C2O4 = (1.9 mol/L) * (50 mL * (1 L / 1000 mL)) = 0.095 mol H2C2O4

Since the balanced equation for the reaction between NaOH and H2C2O4 is:

H2C2O4 + 2 NaOH → Na2C2O4 + 2 H2O

From the balanced equation, 2 moles of NaOH react with 1 mole of H2C2O4. Therefore, we can find the mmol of NaOH:

mmol of NaOH = 0.095 mol H2C2O4 * (2 mol NaOH / 1 mol H2C2O4) = 0.19 mol NaOH

Thus, 0.19 mol or 190 mmol of NaOH will react completely with 50 mL of 1.9 M H2C2O4.

Know more about Balanced Chemical Equation here:

https://brainly.com/question/28383671

#SPJ11

The substitution product of 3-bromo-3-methylpentane and methanol will be 3-methyl-3-pentanol, and The substitution product of 3-chloro-3-methylhexane and methanol will be 3-methyl-3-hexanol.

3-bromo-3-methylpentane and methanol undergo SN1 reaction as follows; Step 1; Ionization of the substrate

3-bromo-3-methylpentane → 3-methyl-3-pentyl cation + Br⁻

Step 2; Nucleophilic attack by methanol and deprotonation

3-methyl-3-pentyl cation + CH₃OH → 3-methyl-3-pentanol + H⁺

Therefore, the substitution product is 3-methyl-3-pentanol.

3-chloro-3-methylhexane and methanol undergo SN₁ reaction as follows; Step 1; Ionization of the substrate

3-chloro-3-methylhexane → 3-methyl-3-hexyl cation + Cl⁻

Step 2; Nucleophilic attack by methanol and deprotonation

3-methyl-3-hexyl cation + CH₃OH → 3-methyl-3-hexanol + H⁺

Therefore, the substitution product is 3-methyl-3-hexanol.

To know more about substitution product here

https://brainly.com/question/14052597

#SPJ4

The beta decay product of Mo-98 (Molybdenum-98, atomic number 42) is Tc-98 (Technetium-98).

Here's a step-by-step explanation:

1. Mo-98 undergoes beta decay, where a neutron is converted into a proton and an electron (beta particle) is emitted.
2. As a result, the atomic number increases by 1 (from 42 to 43) and the element changes from Mo (Molybdenum) to Tc (Technetium).
3. The mass number remains the same (98), so the final product is Tc-98 (Technetium-98).

So, the correct choice among the given options is Tc-98.

To learn more about beta decay, visit:

https://brainly.com/question/31394531

#SPJ11

Since we are ignoring gravitational effects, we can assume that the sucrose solution and the water on top of it will mix through diffusion.

a)After 24 s, some diffusion will have occurred, but the concentration profile will not have fully mixed yet. We can use Fick's second law to find the concentration at 5.0 cm above the lower layer: ∂C/∂t = D(∂^2C/∂x^2).

where C is the concentration, t is time, x is distance, and D is the diffusion coefficient. Since we are only interested in the concentration at 5.0 cm above the lower layer, we can set x = 0.05 m. The diffusion coefficient for sucrose in water at room temperature is about 5.2 x 10^-10 m^2/s.

Using the initial conditions of 10 g of sugar in 5.0 cm^3 of water, we can calculate the initial concentration: C(0,0.05) = 10 g / (5.0 cm^3) = 2 g/cm^3, Now we can solve Fick's second law for C(24,0.05): C(24,0.05) = C(0,0.05) erfc[(0.05)/(2 sqrt(D t))].

erfc is the complementary error function, which can be found in tables or using a calculator. Plugging in the values, we get: C(24,0.05) = 1.10 g/cm^3
To convert to molarity, we need to divide by the molecular weight of sucrose (342.3 g/mol) and multiply by 1000 to convert from g/cm^3 to g/L: C(24,0.05) = 1.10 g/cm^3 / 342.3 g/mol * 1000 g/L = 3.21 x 10^-3 M.

b. After 2.4 years, diffusion will have had ample time to fully mix the solution. We can use the same initial conditions and diffusion coefficient as before, but now we need to solve Fick's second law for a much longer time: C(t,0.05) = C(0,0.05) erfc[(0.05)/(2 sqrt(D t))]
Plugging in the values, we get: C(2.4 years,0.05) = 0.5 g/cm^3
Converting to molarity as before, we get: C(2.4 years,0.05) = 0.5 g/cm^3 / 342.3 g/mol * 1000 g/L = 1.46 x 10^-3 M.

To know more about molarity click here

brainly.com/question/23686981

#SPJ11

The major organic product formed from the reaction of 1-bromopropane with KOCH(CH3)3 is 1-propoxypropane.

The reaction involves a substitution reaction where the bromine atom of 1-bromopropane is replaced by the alkoxide group (OC(CH3)3) from potassium tert-butoxide (KOCH(CH3)3). The tert-butoxide ion is a strong nucleophile, attacking the electrophilic carbon of 1-bromopropane to form a new carbon-oxygen bond.

This results in the formation of 1-propoxypropane as the major product, where the tert-butoxide group replaces the bromine atom. The reaction occurs via an S_N2 mechanism, where the nucleophile attacks the substrate from the backside, resulting in inversion of configuration at the reaction center.

For more questions like Reaction click the link below:

https://brainly.com/question/28984750

#SPJ11

Answer:

Density is grams / cm^3

Explanation:

Since The formular for density is mass over volume, most commonly cm^3, we can find the mass of a quantity given the volume. Say D=.5 g/cm^3. If we have 1 mL of a substance then we do 1 mL = 1cm^3

1 cm^3 x (.5 g / cm^3) = .5 g of the substance

Answer:

0.441 M KHP

Explanation:

KHP has a molar mass of 204.22 g/mol. It is Not actually KHP, it has its own longer formula C8H5KO4, Potassium hydrogen phthalate.

To find the molarity we will simply do moles/L

moles = 1.802 g x (1 mol KHP / 204.22 g) = 0.008824 mol KHP

The volume needs to be in L so divide by 1000, 20.0/10000 = 0.0200 L

Molarity = moles / L = 0.008824 moles / 0.0200 L = 0.441 M = [KHP]

The balanced equation for the reaction between calcium chloride ([tex]CaCl_{2}[/tex]) and silver nitrate ([tex]AgNO_{3}[/tex]) to produce silver chloride (AgCl) and calcium nitrate ([tex]Ca(NO_{3})_{2}[/tex]) is:

CaCl2 (aq) + 2AgNO3 (aq) → 2AgCl (s) + Ca(NO3)2 (aq)

The precipitate in this reaction is silver chloride (AgCl), which is a white solid that is insoluble in water.

The ionic equation for this reaction can be written by first breaking down all the soluble compounds into their constituent ions:

Ca2+ (aq) + 2Cl- (aq) + 2Ag+ (aq) + 2NO3- (aq) → 2AgCl (s) + Ca2+ (aq) + 2NO3- (aq)

In this equation, Ca2+ and NO3- are spectator ions since they appear on both sides of the equation and do not undergo any chemical change.

The net ionic equation for the reaction can be obtained by removing the spectator ions from the ionic equation:

2Ag+ (aq) + 2Cl- (aq) → 2AgCl (s)

The net ionic equation shows only the species that participate in the actual chemical reaction, which in this case is the formation of silver chloride.

Learn more about iconic equations, here:

https://brainly.com/question/30379359

#SPJ1

Answer:

[tex]The \: systemic \: name \: of \: the \: \\ compound \: is[/tex]

Mercuric nitrate

hope it helps <3

Na2CO3  (sodium carbonate) can be used to separate Ca2+ and Ba2+ ions in aqueous solution. When Na2CO3 is added to the solution, it will react with the Ca2+ and Ba2+ ions to form insoluble carbonates, which will precipitate out of the solution. The formulas of the precipitates are CaCO3 (calcium carbonate) and BaCO3 (barium carbonate).

For calcium ions (Ca2+), the reaction is:
Ca2+ (aq) + CO3^2- (aq) → CaCO3 (s)

For barium ions (Ba2+), the reaction is:
Ba2+ (aq) + CO3^2- (aq) → BaCO3 (s)

A precipitation reaction is a reaction taking place in an aqueous solution in which two ionic bonds join, resulting in the formation of an insoluble salt. The insoluble salts formed in these reactions are called precipitates. These reactions can be used to find the presence of a particular element in the given solution.
The precipitates formed in this question are calcium carbonate (CaCO3) and barium carbonate (BaCO3). These solid precipitates can be separated from the aqueous solution by filtration or centrifugation.

For more questions on precipitation reactions: https://brainly.com/question/29990706

#SPJ11

Na2CO3  (sodium carbonate) can be used to separate Ca2+ and Ba2+ ions in aqueous solution. When Na2CO3 is added to the solution, it will react with the Ca2+ and Ba2+ ions to form insoluble carbonates, which will precipitate out of the solution. The formulas of the precipitates are CaCO3 (calcium carbonate) and BaCO3 (barium carbonate).

For calcium ions (Ca2+), the reaction is:
Ca2+ (aq) + CO3^2- (aq) → CaCO3 (s)

For barium ions (Ba2+), the reaction is:
Ba2+ (aq) + CO3^2- (aq) → BaCO3 (s)

A precipitation reaction is a reaction taking place in an aqueous solution in which two ionic bonds join, resulting in the formation of an insoluble salt. The insoluble salts formed in these reactions are called precipitates. These reactions can be used to find the presence of a particular element in the given solution.
The precipitates formed in this question are calcium carbonate (CaCO3) and barium carbonate (BaCO3). These solid precipitates can be separated from the aqueous solution by filtration or centrifugation.

For more questions on precipitation reactions: https://brainly.com/question/29990706

#SPJ11

Answer: The concentration of the stock hydrogen peroxide solution is 0.0086 mol/L (rounded to four decimal places).

Explanation:

5 H2O2 + 2 KMnO4 + 3 H2SO4 → K2SO4 + 2 MnSO4 + 8 H2O + 5 O2

moles H2O2 = (0.008500 mol/L) x (11.28 mL/1000 mL) x 30 = 0.009684 mol

Since 10.00 mL of the diluted solution was titrated, the number of moles of H2O2 in the undiluted (stock) solution is:

moles H2O2 = (0.009684 mol/11.28 mL) x 10.00 mL = 0.008577 mol

concentration = moles H2O2/volume of stock solution = 0.008577 mol/L

Answer:

0.7191 mol/L

Explanation:

To solve it, we need to use the information given to determine the number of moles of potassium permanganate (KMnO4) that were used in the titration. The concentration of the KMnO4 solution is 0.008500 mol/L and the average volume used in the titration was 11.28 mL, so the number of moles of KMnO4 used is (0.008500 mol/L) * (11.28 mL) * (1 L / 1000 mL) = 0.00009588 mol.

The balanced chemical equation for the reaction between potassium permanganate and hydrogen peroxide in an acidic solution is:

2MnO4- + 5H2O2 + 6H+ -> 2Mn2+ + 5O2 + 8H2O

According to this equation, two moles of MnO4- react with five moles of H2O2. This means that for every two moles of MnO4- that react, five moles of H2O2 are consumed.

Since we have 0.00009588 moles of MnO4-, we can expect that (5 moles H2O2 / 2 moles MnO4-) * 0.00009588 moles MnO4- = 0.0002397 moles of H2O2 were consumed in the reaction.

The volume of the diluted hydrogen peroxide solution that was titrated was 10.00 mL, so its concentration is (0.0002397 mol) / (10.00 mL) * (1000 mL / L) = 0.02397 mol/L.

Since this solution was diluted by a factor of 30, the concentration of the stock hydrogen peroxide solution must be 30 times greater than the concentration of the diluted solution: 30 * 0.02397 mol/L = 0.7191 mol/L.

The given statement, A substance that causes the oxidation of another substance is called an oxidizing agent is True because the oxidizing agent is a substance that causes the oxidation of another substance.

Oxidation is a chemical reaction in which electrons are transferred from one molecule to another, resulting in the formation of new molecules. Oxidizing agents can be various compounds such as oxygen, halogens, and certain metal ions.

Oxygen is the most common oxidizing agent and is used in many oxidation reactions. Halogens, such as chlorine, bromine and iodine, are also used as oxidizing agents in certain reactions.

Metal ions, such as iron, copper and manganese, may also act as oxidizing agents in reactions. Oxidizing agents are essential in biological processes such as respiration and metabolism, as well as industrial processes such as electricity generation and chemical manufacturing.

Know more about oxidizing agent here

https://brainly.com/question/10547418#

#SPJ11

The pH of a 0.100 M NH₃ solution with Kb = 1.8 x 10⁻⁵ is 11.13. (A)


1. Write the Kb expression: Kb = [NH₄⁺][OH⁻] / [NH₃]

2. Set up an ICE table: Initial concentrations are [NH₃] = 0.100 M, [NH₄⁺] = 0, [OH⁻] = 0. Changes are -x for NH₃ and +x for NH₄⁺ and OH⁻.

3. Substitute values into the Kb expression: (1.8 x 10⁻⁵) = (x)(x) / (0.100 - x)

4. Since x is small compared to 0.100, we can approximate by removing x in the denominator.

5. Solve for x: x² = (1.8 x 10⁻⁵)(0.100) ⟹ x = 1.34 x 10⁻³ M

6. Calculate the pOH: pOH = -log(1.34 x 10⁻³) ≈ 2.87

7. Find the pH: pH = 14 - pOH ≈ 11.13(A)

To know more about ICE table click on below link:

https://brainly.com/question/30642088#

#SPJ11

Conductivity depends on the number of ions present in the solution and their mobility, a compound that produces more ions will have higher conductivity. In this example, A2X2 will have higher conductivity than A1X due to the greater number of ions it produces.

The Group A compounds with the same concentration (0.05 M) have large differences in conductivity values because their degree of dissociation varies. The degree of dissociation refers to the extent to which a compound breaks down into its constituent ions in a solution.
For example, let's consider two Group A compounds: sodium chloride (NaCl) and calcium chloride (CaCl2). NaCl dissociates completely in water to form Na+ and Cl- ions, while CaCl2 dissociates partially to form Ca2+ and 2Cl- ions.
The dissociation equation for NaCl is: NaCl → Na+ + Cl-
The dissociation equation for CaCl2 is: CaCl2 → Ca2+ + 2Cl-
Since NaCl dissociates completely, it produces a higher concentration of ions in solution, resulting in higher conductivity. On the other hand, CaCl2 only partially dissociates, resulting in a lower concentration of ions in solution and lower conductivity.
Therefore, the differences in conductivity values between Group A compounds with the same concentration (0.05 M) can be attributed to their varying degree of dissociation.
The Group A compounds have large differences in conductivity values at the same concentration (0.05 M) due to the varying degrees of dissociation and the number of ions produced by each compound when dissolved in a solution.
For instance, consider two Group A compounds, A1X and A2X2:
1. A1X dissociates as:
  A1X → A1⁺ + X⁻
  In this case, one molecule of A1X produces two ions in the solution.
2. A2X2 dissociates as:
  A2X2 → A2⁴⁺ + 2X²⁻
  Here, one molecule of A2X2 produces three ions in the solution.
Since conductivity depends on the number of ions present in the solution and their mobility, a compound that produces more ions will have higher conductivity. In this example, A2X2 will have higher conductivity than A1X due to the greater number of ions it produces.

To learn more about Conductivity, click here:

brainly.com/question/31364875

#SPJ11

Answer:

ZnS

Explanation:

Zinc sulfide is not soluble in water while Calcium sulfide is, therefore the former will precipitate but the latter won't

Answer:

10.34 mL

Explanation:

The molar mass of K2S is 110.26g/mol.

Number of moles of K2S = mass / molar mass

Number of moles of K2S = 28.5g / 110.26g/mol = 0.2586 mol

Now, we can use the definition of molarity to calculate the volume of the solution that can be prepared.

Molarity = number of moles / volume of solution (in liters)

Rearranging the equation, we get:

Volume of solution = number of moles / molarity

Volume of solution = 0.2586 mol / 25 mol/L = 0.010344 L = 10.34 mL

Therefore, 10.34 mL of a 25M solution of K2S can be prepared from 28.5g of K2S.

Answer:

Electronegativity and ionization energy

Answer:

Electronegativity and ionization energy

Explanation:

In the traditional saponification process, a strong base (C) is added to a fat to produce glycerol and soap molecules.

The strong base breaks the ester bonds in the fat, resulting in the formation of glycerol and fatty acid salts, which are soap molecules.

This is a hydrolysis reaction where the ester bonds in the fat or oil are cleaved by the base, resulting in the formation of glycerol (also known as glycerin) and fatty acid salts, which are soap molecules. The process involves the reaction of the base with the triglycerides (fats) present in the fat or oil, leading to the production of soap, which can be used for cleaning and emulsifying properties, and glycerol, which has various applications in cosmetics, food, and pharmaceutical industries.

To know more about Saponification Process:

https://brainly.com/question/2263502

#SPJ11

Answer:

que es un compuesto ionico

The literature value for KHT solubility is 0.042 g/100 mL. The value obtained from the experiment is slightly higher than the literature value.

Solubility is the ability of a substance to dissolve in a solvent, usually a liquid, to form a homogeneous solution. It is expressed as the maximum amount of solute that can dissolve in a given quantity of solvent or solution. It can also be expressed in terms of concentration, as the amount of solute that dissolves in a given volume of solvent or solution at a given temperature. A substance is considered soluble if it dissolves in a solvent at a rate sufficient to reach equilibrium.

Given: Solubility of KHT in mol L⁻¹ = 0.00025 mol/L

Conversion: 0.00025 mol/L x 204.22 g/mol = 0.0505 g KHT/100 mL

The literature value for KHT solubility is 0.042 g/100 mL. The value obtained from the experiment is slightly higher than the literature value.

To learn more about solubility

https://brainly.com/question/23946616

#SPJ1

To upload a single file of all the skeletal structures for the molecules in the table, you can use a program like ChemDraw or MarvinSketch to draw the structures and save them as individual files. Then, you can combine them into a single PDF or image file using a tool like Adobe Acrobat or Microsoft Paint. Just make sure that each structure is clearly labeled with the name of the molecule to avoid any confusion.

Let us discuss this in detail.

To upload a single file of all the skeletal structures for the molecules in the table, follow these steps:

1. Gather the skeletal structures: Collect images or create diagrams of the skeletal structures for each molecule listed in the table. Make sure they are accurate and clear.

2. Label the structures: For each skeletal structure, add a label that clearly indicates the name of the molecule. You can do this using image editing software or by creating the labels directly on the diagrams if you are drawing them.

3. Combine the structures into a single file: Arrange all the labeled skeletal structures in a document or image file, ensuring that each structure is easily distinguishable and well-organized. You can use software like Microsoft Word, PowerPoint, or an image editor like GIMP or Photoshop for this purpose.

4. Save the file: Save your document or image file with an appropriate name that reflects its contents, such as "Skeletal_Structures_of_Molecules."

5. Upload the file: Finally, upload the single file containing all the labeled skeletal structures for the molecules in the table to the designated platform or as per the given instructions.

By following these steps, you will have successfully created and uploaded a single file of all the skeletal structures for the molecules in the table.

Learn more about skeletal structures at https://brainly.com/question/29165067

#SPJ11

The type of intermediate is present in the SN2 reaction of cyanide with bromoethane is reaction has no intermediate. The correct answer is E.

To learn more about SN2 reaction, visit:  

https://brainly.com/question/25175580

#SPJ11

1. The equilibrium expression for the compound is:

[Cd²⁺] [CO₃²⁻] / [CdCO₃]

2. The solubility of product, Ksp for the compound is  1.0×10⁻¹²

Equilibrium constant, Keq for a given chemical reaction is written as shown below:

nReactant ⇌ mProduct

Equilibrium constant (Keq) = [Product]ᵐ / [Reactant]ⁿ

Now, we can shall determine the equilibrium expression, Keq for the reaction. Details below:

CdCO₃(aq) ⇌ Cd²⁺(aq) +  CO₃²⁻(aq)

Equilibrium constant (Keq) = [Product]ᵐ / [Reactant]ⁿ

Equilibrium constant expression = [Cd²⁺] [CO₃²⁻]/ [CdCO₃]

The solubility of product, Ksp for the compound ca be obtained as follow:

Ksp = [Cd²⁺] × [CO₃²⁻]

Ksp = 1.0×10⁻⁶ × 1.0×10⁻⁶

Ksp = 1.0×10⁻¹²

Learn more about equilibrium constant:

https://brainly.com/question/16589765

#SPJ1