The partial pressure of oxygen is equal to 10.2 atm.
Given the following data:
Number of moles of oxygen = 3.25 moles.Number of moles of nitrogen = 2.75 moles.Total pressure = 22.4 atm.To determine the partial pressure of oxygen:
First of all, we would find the total number of moles of the elements:
[tex]n=3.25+2.75[/tex]
n = 6 moles
Next, we would determine the mole fraction of the oxygen by using this formula:
[tex]Molefraction \;of \;a \;substance =\frac{No.\; of \; moles \;of \;substance}{Total \;no. \;of \; moles \;of \;substances}[/tex]
Substituting the values, we have:
[tex]Molefraction \;of \;a \;substance =\frac{2.75}{6} \\\\Molefraction \;of \;a \;substance =0.4583[/tex]
For oxygen:
[tex]Partial \;pressure = Molefraction \times Total\;pressure\\\\Partial \;pressure = 0.4583 \times 22.4[/tex]
Partial pressure of oxygen = 10.2 atm.
Read more: https://brainly.com/question/15508465
Answer:
12.1
Explanation:
3.25 + 2.75= 6 moles total
then take: 3.25/6 to get 0.542
multiply 0.542 by 22.4 to get 12.1
the other answer solved for nitrogen, not oxygen.
A solution that contains less than the amount of solute that would be dissolved at equilibrium is considered to be
Answer:
dilute solution
A solution containing less solute than the equilibrium amount is called a dilute solution. The solvent has a limited capacity to dissolve a solute.
Explanation:
PLS HELP CHEM
What is the temperature, in Celsius, of 20.8 g of carbon dioxide (CO2) in a 575 mL container under 1.5 atm of pressure?
Answer:
Use the formula PV=nRT to get the temperature
A gas has a volume of 3.7 liters with a pressure of 1.75 atm. What is the pressure of the gas if its volume is raised to 4.5 L?
Answer: 251 K
Explanation: hope this helps :)
TRUE or FALSE 1. Badminton began in India as a game called poona. 2. The shuttle was then called a bird because it was made from goose feather. 3. Ti jian zi played by throwing up in the air. 4. Racket is made of either metal or synthetic materials. 5. Head, throat, shaft, and handle are the parts of the rackets. 6. Shuttlecock is made up of 16 goose feathers. 7. Forehand, Backhand, and Sidestroke are the three basic skills of Badminton. 8. Backhand is use to depends on the type of shot to be executed. 9. Stroke means to propel with a controlled swinging blow. 10. The whole size of the badminton court has 39 meters.
Answer:
1.false
2.true
3.true
4.true
5.false
6.false
7.false
8.true
9.false
10.true
Explanation:
I took the test
Using the material selection processes, justify why the manufacturers/designers used the materials they did for super glue?
Answer:
Aluminium reusable water bottle Purpose of aluminum: Weighs less by volume than most other metals and comes at an affordable price.
Explanation:
How many moles of KOH are in 21.0g of KOH?
Answer:
HowHow many moles of KOH are in 21.0g of KOH?
Answer:
0.374 moles
Explanation:
I have included the dimensional analysis below, and by MM I mean Molar Mass of the atom.
Hope this helps!
what is the name of something that starts with N and ends with G
Nutmeg
Nubbing
Notifying
Neezing
Nudging
Needing
Niffing
Narcotizing
Nanjing
Neighbouring
Nothing
Nimming
Neighboring
Netting
Nesting
Narcing
Nitpicking
Non-Living
Neutralizing
Nightwalking
Nonspeaking
how is waste removed from the body
Waste is removed from the body in various ways. Kidneys filter out metabolic waste, excess fluid and eliminate it in the form of urine. Lungs exhale CO2 from the deoxygenated blood. The undigested solid waste is egested out from the large intestine. Excretion is the process of removing wastes and excess water from the body. It is one of the major ways the body maintains homeostasis. Organs of excretion make up the excretory system. They include the kidneys, large intestine, liver, skin, and lungs.
How many moles of c3h6will be consumed when 4.11 mol of co2 are produced in the following equation 2c3h6 +9o2 - 6co2 + 6H2o
Answer: a.1.37 b.4.11 c.6.00 d.12.3
Explanation:
A quantity of electricity equal to 9.439 x 104 C passes through a galvanic cell that has an Ni(s) anode. Compute the maximum chemical amount, in moles, of Ni2 (aq) that can be released into solution.
The maximum chemical amount in moles of Ni₂ (aq) that can be released into the solution is 0.978 mol.
Using Q = nF where Q = quantity of electricity = 9.439 × 10⁴ C = 94390, n = number of moles of NI₂ (aq) and F = Faraday's constant = 96485 C/mol
Making n subject of the formula, we have
n = Q/F
substituting the values of the variables into the equation, we have
n = Q/F
n = 94390 C/96485C/mol
n = 0.978 mol
So, the maximum chemical amount in moles of Ni₂ (aq) that can be released into the solution is 0.978 mol.
Learn more about electrolysis here:
https://brainly.com/question/10692990
My QUESTION
A car is travelling 35 miles per hour. How fast is it going when
measured in meters per minute?
Answer:
933.33 m/ min
Explanation:
1 mile = 1.6 km
So the car travels 1.6× 35 km in 1 hour
One hour has 60 minutes
So speed of car = 1.6×35 km / 60 minutes
1km = 1000 m
Speed = 1.6×35×1000 m/ 60 minutes
= 933.33 meters per minute
A car is traveling 35 miles per hour. The speed that is measured in meters per minute is 933.33 m/ min.
What is speed?Speed is the dimension of distance. It is calculated in meters per second. It is the rate of change of an object in a direction. Speed is calculated by dividing the distance by time. It is a scalar quantity.
Given, that a car is traveling 35 miles per hour. The speed is given, in miles we just have to convert the miles into meters per minute. Miles if the English unit of measurement and meter is the SI unit of measurement.
1 mile = 1.6 km
So the car travels 1.6× 35 km in 1 hour
One hour has 60 minutes
So speed of car = 1.6×35 km / 60 minutes
1km = 1000 m
Speed = 1.6 × 35 × 1000 m/ 60 minutes
= 933.33 meters per minute
Thus, the speed of the car is 933.33 m/ min.
To learn more about speed, refer to the link:
https://brainly.com/question/7359669
#SPJ2
Did cellular respiration occur in trial 3 with the yeast and sugar?
PLEASE HELP ITS DO RIGHT NOWW
Answer:
In summary, yeast is a single-celled fungus that uses cellular respiration, which converts glucose and oxygen into carbon dioxide and ATP. ... Aerobic respiration makes the most ATP, between 36 and 38. Fermentation is anaerobic respiration and happens without oxygen.
Explain why there might be a change in the density of a forged product as compared to that of the cast blank.
Answer:
Forged parts are often tougher than cast parts. This can be determined by performing tensile tests on various areas on the parts. Additionally, the microstructures of forged and cast parts can be used to determine if a part was forged or cast. The microstructure of a cast part will have a more uniform grain structure.
Explanation:
Consider the evaporation of water. The standard change in the free energy is positive with ΔG∘rxn=+8.59kJmol. One might expect this process to occur in the opposite direction, with water vapor condensing into liquid water. How can the evaporation be spontaneously under normal conditions?
Answer:
The partial pressure of water is much less than 1atm, so the free energy change for the process must be negative with ΔGrxn<0.
Explanation:
Water vapor will condense into liquid water when the water vapor is in its standard state, with a pressure of 1atm. Under normal circumstances, the partial pressure of water vapor is much less that 1atm. It is in a nonstandard state. The free energy change of this reaction has to be negative in order to make the reaction spontaneous.
The criteria of the spontaneous process are the change in the Gibbs free energy should be negative. Above the normal boiling point, the TΔS will be greater than ΔH and ΔG<0.
What is Gibbs's free energy?Gibbs free energy can be described as a state function therefore it doesn’t depend on the path. The change in free energy is equal to the change in enthalpy minus the product of entropy change and temperature of the system.
ΔG = ΔH - Δ (TS)
If the process is carried out at constant temperature, ΔT = 0:
ΔG = ΔH – TΔS
ΔG > 0 for the reaction is non-spontaneous, ΔG < 0 for the reaction is spontaneous, exergonic and ΔG = 0 for the reaction is at equilibrium.
Spontaneous can be described as a reaction that occurs by itself without any external action towards it. The non-spontaneous process needs constant external energy applied to continue and as the external action, the process will cease.
Learn more about Gibbs free energy, here:
https://brainly.com/question/9179942
#SPJ5
During __________ reproduction, an identical copy of the parent is produced.
Answer:
During __asexual________ reproduction, an identical copy of the parent is produced.
A car is traveling 70km in 45 minutes. How many miles an hour is the car traveling?
52
Explanation:
70x45÷60= 52
I hope this is helpful
__________ are negatively charged subatomic particles found in orbital clouds around the nucleus of an atom.
Why are sound waves considered a type of mechanical energy?
Question 6 options:
Sound waves can travel through space
Sound waves can travel through a solid
Sound waves transfer energy by the motion of particles
Sounds waves are made by machines
-Sound waves transfer energy by the motion of particles.
Explanation:
These particle-to-particle, mechanical vibrations of sound conductance qualify sound waves as mechanical waves. Sound energy, or energy associated with the vibrations created by a vibrating source, requires a medium to travel, which makes sound energy a mechanical wave.
Sound waves transfer energy by the motion of particles considered a type of mechanical energy.
What is mechanical energy ?Potential energy plus kinetic energy are combined to form mechanical energy. According to the concept of mechanical energy conservation, mechanical energy remains constant in an isolated system that is solely exposed to conservative forces.
The quantity of energy that a force transfers is known as mechanical work. It is a scalar quantity with joules as its SI unit, much as energy.
Since there are only microscopic forces generated by atomic collisions and no macroscopically quantifiable force, heat conduction is not regarded as a kind of work.
Transverse, longitudinal, and surface waves are the three different forms of mechanical waves. When the wave's energy goes through them, they behave differently in terms of how the medium's particles move.
Thus, option C is correct.
To learn more about mechanical energy follow the link;
https://brainly.com/question/1932868
#SPJ2
true or false, Electromagnetic radiation with a higher energy, travels with higher speed than electromagnetic radiation with a lower energy
Answer:
True.
Explanation:
Since electromagnetic radiation travels in waves, we can assume that the more high energy the waves are, the faster they will go. So therefore, higher energy travels faster.
Hope that helps you!
Answer:
True
Explanation:
đặc điểm cơ bản nào để phân biệt vật thể tự nhiên và vật thể nhân tạo
Answer:
natural materials like cotton
In a constant-pressure calorimeter, 55.0 mL of 0.340 M Ba(OH), was added to 55.0 mL of 0.680 M HCI. The reaction caused the temperature of the solution to rise from 22.21 °C to 26.84 °C. If the solution has the same density and specific heat as water (1.00 g/mL and 4.184J/g • °C.) respectively), what is A4 for this reaction (per mole H,O produced)? Assume that the total volume is the sum of the individual volumes.
Answer:
Ba(OH)2 + 2 HCl → BaCl2 + 2 H2O
The reactants are present in equimolar amounts, so there is no excess or limiting reactants.
(0.0500 L) x (0.600 mol/L HCl) x (2 mol H2O / 2 mol HCl) = 0.0300 mol H2O
(4.184 J/g·°C) x (50.0 g + 50.0 g) x (25.82 - 21.73)°C = 1711.256 J
(1711.256 J) / (0.0300 mol H2O) = 57042 J/mol = 57.0 kJ/mol H2O
Explanation:
Why do we need to be more careful of how we use our water
Answer:
because water is actually a limited natural resource
Explanation:
although most of the earth is made up of water , dasalination plants are super expensive and hard to use. Thus slowly due to severely low rainfall over the years the earth is slowly depleting on levels of fresh water thats why we need to be careful how we use water :D !
Construct a conclusion using the claim, evidence and reasoning format to explain the typical properties observed by ionic and covalent compounds.
Answer:
The key to understanding why ionic and covalent compounds have different properties from each other is understanding what's going on with the electrons in a compound. Ionic bonds form when atoms have different electronegativity values from each other. When the electronegativity values are comparable, covalent bonds form.
But, what does this mean? Electronegativity is a measure of how easily an atom attracts bonding electrons. If two atoms attract electrons more or less equally, they share the electrons. Sharing electrons results in less polarity or inequality of charge distribution. In contrast, if one atom attracts bonding electrons more strongly than the other, the bond is polar.
Ionic compounds dissolve in polar solvents (like water), stack neatly on each other to form crystals, and require a lot of energy for their chemical bonds to break. Covalent compounds can be either polar or nonpolar, but they contain weaker bonds than ionic compounds because they are sharing electrons. So, their melting and boiling points are lower and they are softer.
I hope this helps have a great day :)
classify each of the statements about gases as true or false. oxygen molecules at 25 celsius are moving faster than oxygen
Since gas molecules average velocity depends on temperature, oxygen molecules at 25°C are moving faster than oxygen molecules at 0 °C.
According to the kinetic theory of gases, the molecules of a gas are in constant random motion and collide frequently with each other and the walls of the container.
The average speed of gas molecules depends on temperature and molar mass as shown by the relation;
vrms = √3RT/M
The following statement are true among the options provided;
Oxygen molecules at 25°C are moving faster than oxygen molecules at 0 °C Gases exert pressure by colliding with container wallsThe following are false among the options provided;
All hydrogen molecules are moving with the same velocityNitrogen gas exerts more pressure than hydrogen gas because nitrogen molecules are heavier than hydrogen molecules. Nitrogen molecules remain suspended in the atmosphere because they are not attracted to Earth by gravitational forces.Learn more: https://brainly.com/question/6505878
A compound consists of 75% magnesium and 25% oxygen. Find the empirical formula.
% Composition of elements:
Magnesium = 75%Oxygen = 25%Atomic mass of given elements:
Magnesium = 24 gOxygen = 16 gNow, divide % composition by Atomic mass:
[tex]\footnotesize\implies Mg = \dfrac{\% \: Composition}{Atomic \: mass} = \dfrac{75}{24} = \bf 3.125[/tex]
[tex]\footnotesize\implies O = \dfrac{\% \: Composition}{Atomic \: mass} = \dfrac{25}{16} = \bf 1.5625[/tex]
Simplest Ratio:
[tex]\footnotesize\implies Mg = \dfrac{3.125}{1.5625} = 2[/tex]
[tex]\footnotesize\implies O = \dfrac{1.5625}{1.5625} = 1[/tex]
Empirical Formula:
[tex]\footnotesize\implies \underline{ \boxed{ \red{ \bf Empirical \: Formula = Mg_2O}}}[/tex]
The empirical formula will be [tex]Mg_{2}[/tex] .
What is empirical formula?The simplest entire number fraction of atoms contained in a chemical molecule is its empirical formula.
Calculation of empirical formula:
It is given that, composition of Mg = 75 %, composition of oxygen = 25%.
It is known that, atomic mass of Mg = 24 g, atomic mass of oxygen = 16g.
By dividing % composition by atomic mass of given elements:
Mg = % composition / %atomic mass
= 75 / 24
= 3.125
Oxygen (O) = % Composition / atomic mass
= 25 / 1.56
Now, calculate simplest ratio of Mg and O.
For Mg = 3.125 / 1.56
= 2.
For O = 1.56 / 1.56
= 1
So, the empirical formula will be [tex]Mg_{2}O[/tex].
To know more about empirical formula.
https://brainly.com/question/14044066.
#SPJ2
All of the following are properties of molecular compounds except
O A A crystal structure,
O B. low melting points.
C. bonds formed through shared electrons,
D. the inability to conduct electric current when melted or dissolved in water,
Answer: the answer is c.
Explanation:
i juss guessed and it was right?
When magnesium chloride is formed what question will the student need to ask prior to writing the formula?
A.
What are the oxidation numbers of each atom?
B.
What is the total number of electrons for each atom?
C.
What is the state of matter of each element in the formula?
D.
What period does magnesium belong to?
Prior to writing the chemical formula of magnesium chloride, a question which any student will need to ask is: A. What are the oxidation numbers of each atom?
A chemical formula can be defined as a scientific notation that is used to show (represent) the type and total number of atoms that constitute a particular chemical molecule or compound, by using the oxidation number, chemical symbols and subscripts.
Hence, a student would need to know the oxidation numbers of each atom when magnesium chloride is formed after a chemical reaction.
In Chemistry, an oxidation number represents the number of electrons gained or lost by an atom of a chemical element during a chemical reaction.
In conclusion, when magnesium chloride is formed, a question which the student will need to ask prior to writing the chemical formula is "what are the oxidation numbers of each atom?"
Read more: https://brainly.com/question/13750908
how many moles are there in 3.25x10^20 particles of lead oxide
Answer:
5.39 X 10-4
Explanation:
Try Checking It Out If It Right Or Not
For the oxidation–reduction reaction equation
2Sc+3Br2⟶2ScBr3
indicate how many electrons are transferred in the formation of one formula unit of product.
In the formation of 1 formula unit of ScBr₃, 3 electrons are transferred.
Let's consider the following balanced redox reaction.
2 Sc + 3 Br₂ ⟶ 2 ScBr₃
We can identify both half-reactions.
Oxidation: 2 Sc ⟶ 2 Sc⁺³ + 6 e⁻
Reduction: 6 e⁻ + 3 Br₂ ⟶ 6 Br⁻
As we can see, 6 electrons are involved in the formation of 2 formula units of ScBr₃. Thus, 3 electrons are involved in the formation of 1 formula unit of ScBr₃.
In the formation of 1 formula unit of ScBr₃, 3 electrons are transferred.
Learn more: https://brainly.com/question/23331785
PLEASE ANWSER THIS!!
which is the best definition m of pitch?
A: pitch is how high or low a sound is
B: pitch is how loud a sound is
C: pitch is how well a sound travels through a medium
Answer:
A. because there both high pitched voice and low pitched ( girls have sweet, shrill ,high pitched good voice ) where as boys have horase ,low pitched medium voice )