a metal block increases in tempreture from 15 digree to 60 digree when supplied with 13500 j of heat energy​

Answers

Answer 1

By finding the specific heat, we can expect that the material of the block is copper or silver (or a mix).

Of which type of metal is the block made?

We know that we give 13,500 joules of energy to the metal block (which we assume has a mass of 1kg) and the temperature increases from 15°C to 60°C.

Then the increase is:

60°C - 15°C = 45°C

Then this metal has a specific heat of:

H = 13,500j/(45°C*1 kg) = 300 J/°C*kg

So it could be copper, which has a specific heat of 380J/°C*kg or Silver, which has a specific heat of 240 J/°C*kg (or a mix of these two).

If you want to learn more about specific heat:

https://brainly.com/question/6198647

#SPJ1


Related Questions

A bullet travels at 850 m/s. How long will it take a bullet to go 1000 m?

Answers

Answer:

I say 150 because i aded 850+150= 1000 so yea thats how i got my answer

Explanation:

How do riders in a Ferris wheel possess Translatory motion but not circular motion?

Answers

Answer:

A wheel on a car, however, rotates around the car's axle, so it does have rotational motion. For this example, if you were to pick a single point on the edge of the wheel, you could also say that it has circular motion.

For this situation, i push on a heavy chair. suppose i push moderately on the chair, and this time the chair does move. then the strength of the force the chair exerts on me is group of answer choices

Answers

It is equal to the force you exert on the chair.

The quarks that compose a baryon may have charges of:.

Answers

The quarks that compose a baryon may have charges of +(2/3)e and -(1/3)e which means have negative and positive charges.

What are quarks?

Quarks are the most fundamental particles that make up the atomic nucleus. All solid matter that we know is made of three particles, which are the up and down quarks, 'u' and 'd', and the electron.

Quark is one of the two basic elements that make up matter and is the only one of the particles that interacts through all four fundamental forces.

See more about quarks at brainly.com/question/1444547

#SPJ1

Q2 Alice wants to find the pressure she exerts upon the floor. She measures the length and width of her shoe and multiplies them together to get a rough area. She then doubles the answer. She divides her weight in newtons by the total area she has worked out. a) Why won't her area measurement be very accurate?​

Answers

Answer:

The area estimate is somewhat inaccurate because the length * width of the shoe will be an inaccurate measurement of the area of the shoe that actually contacts the floor.

You are standing on a river bank. The river is flowing at a rate of $2.0\;\mathrm{ m/s}.$ You see a duck is floating in the river without swimming, and is being carried by the river downstream. You throw two pieces of bread at the duck. One piece lands upstream of the duck, and the other downstream equal distance. The duck can swim at $1.0 \; \mathrm{m/s}.$ The duck is hungry, and wants to reach the bread in the shortest amount of time. What should the duck do

Answers

Let the upstream breadcrumb's position act as the origin, so the position at time [tex]t[/tex] of upstream crumb [tex](B_U)[/tex], duck [tex](D)[/tex], and downstream crumb [tex](B_D)[/tex] are, respectively,

[tex]x_{B_U} = \left(2.0\dfrac{\rm m}{\rm s}\right) t[/tex]

[tex]x_D = d\,\mathrm m + v_D t[/tex]

[tex]x_{B_D} = 2d\,\mathrm m + \left(2.0\dfrac{\rm m}{\rm s}\right) t[/tex]

where [tex]d[/tex] is the distance (in m) between the duck and either crumb at the start, and [tex]v_D[/tex] is the velocity of the duck relative to the Earth.

To get both breadcrumbs, the duck has to choose between chasing the upstream or downstream crumb first.

• If the upstream crumb is chosen first, then [tex]v_D[/tex] is 2.0 - 1.0 = 1.0 m/s. Find the time it takes for the duck to reach the upstream crumb:

[tex]x_{B_U} = x_D \implies \left(2.0\dfrac{\rm m}{\rm s}\right) t = d + \left(1.0\dfrac{\rm m}{\rm s}\right) t \\\\ \implies t = d \, \mathrm s[/tex]

In this time, the duck covers a distance of

[tex]x_D = d\,\mathrm m + \left(1.0\dfrac{\rm m}{\rm s}\right) (d\, \mathrm s) = 2d \, \mathrm m[/tex]

while the downstream crumb will have traveled a distance of

[tex]x_{B_D} = 2d\,\mathrm m + \left(2.0\dfrac{\rm m}{\rm s}\right) (d \,\mathrm s) = 4d \,\mathrm m[/tex]

putting a total distance of [tex]2d+4d=6d\,\mathrm m[/tex] between the duck and the remaining crumb.

Take the duck's new position to be the new origin. When the duck turns around and travels with the current, its speed [tex]v_D[/tex] will be 2.0 + 1.0 = 3.0 m/s. Then at time [tex]t[/tex], the duck and remaining crumb have position relative to the new origin given by

[tex]x_D' = \left(3.0\dfrac{\rm m}{\rm s}\right) t[/tex]

[tex]x_{B_D}' = 6d \,\mathrm m + \left(2.0\dfrac{\rm m}{\rm s}\right) t[/tex]

Find the time the duck needs to catch up to the downstream crumb:

[tex]x_D' = x_{B_D}' \implies \left(3.0\dfrac{\rm m}{\rm s}\right) t = 6d\,\mathrm m + \left(2.0\dfrac{\rm m}{\rm s}\right) t \\\\ \implies t = 6d \,\mathrm s[/tex]

Then the total time the duck needs to get both crumbs is [tex]d + 6d = 7d \,\mathrm s[/tex].

• If instead the downstream crumb is chased down first, we start with [tex]v_D[/tex] = 3.0 m/s, so that

[tex]x_D = x_{B_D} \implies d\,\mathrm m + \left(3.0\dfrac{\rm m}{\rm s}\right) t = 2d\,\mathrm m + \left(2.0\dfrac{\rm m}{\rm s}\right) t \\\\ \implies t = d \, \mathrm s[/tex]

In this time, the duck covers a distance of

[tex]x_D = d\,\mathrm m + \left(3.0\dfrac{\rm m}{\rm s}\right) (d\,\mathrm s) = 4d \,\mathrm m[/tex]

while the upstream crumb moves

[tex]x_{B_U} = \left(2.0\dfrac{\rm m}{\rm s}\right) (d\,\mathrm s) = 2d \,\mathrm m[/tex]

The distance between the duck and remaining crumb is then [tex]4d-2d=2d\,\mathrm m[/tex]. Now the duck turns around with speed [tex]v_D[/tex] = 1.0 m/s. If the crumb's new position is taken to be the origin, then

[tex]x_{B_U}' = \left(2.0\dfrac{\rm m}{\rm s}\right) t[/tex]

[tex]x_D' = 2d\,\mathrm m + \left(1.0\dfrac{\rm m}{\rm s}\right) t[/tex]

Find the time it takes for the duck to get the last crumb:

[tex]x_{B_U}' = x_D' \implies \left(2.0\dfrac{\rm m}{\rm s}\right)t = 2d\,\mathrm m + \left(1.0\dfrac{\rm m}{\rm s}\right) t \\\\ \implies t = 2d\,\mathrm s[/tex]

Then the duck can get both crumbs in a total of [tex]d+2d=3d\,\mathrm s[/tex].

To get both crumbs in the shortest time, the duck should go after the downstream crumb first. This path over 2 times faster than the other.

Two boxes need to be moved into storage. Jamal and Jude each want to move a box. The force of gravity on both the boxes is 50 N. Jamal is lifting with a force of 60 N, and Jude is lifting with a force of 45 N.

Which best describes the movement of the boxes?

Jamal moved his box to storage, but Jude could not move his.
Jamal and Jude can successfully move each box into storage.
Jamal could not move his box to storage, but Jude could.
Neither Jamal nor Jude could move the boxes into storage.

Answers

Answer:

Explanation:

Remark

If both are trying to get the box into storage and they can only  use lifting to do it, then Jude won't be able to do it. This assumes they cannot slide the boxes. Jude is not using enough force to overcome gravity so the box will just sit.

On the other hand Jamel is putting enough force to not only lift the box but it will move upwards against gravity. If we ignore that fact, then Jamel will get his box into storage.

Answer: A

a box is at rest on a ground. An unbalance force acts on the box causes it to start. The box moves 10 meters in 2 seconds and then stop. why did the box moving? what is the box's average speed?

Answers

The box stopped moving because there was a negative acceleration in the x direction caused by friction.
To find the average speed, simply divide the displacement by time: 10 / 2 = 5 m/s

Explain how birds, bats, insects, airplanes, rockets, and hot air balloons achieve their flight.

Answers

The birds, bats, insects, airplanes, rockets, and hot air balloons achieve their flight by creating high pressure below the aircraft and low pressure above it

What are living and non-living things?

They both consist of fundamentally simple building blocks. They are composed of substances or mass. Atmospheric and molecular building blocks make up the world.

In order to create high pressure below the aircraft and low pressure above it, airplanes employ specially built wings.

The wing receives sufficient airflow past it to counteract the weight and drag of the aircraft by utilizing a device to provide thrust, such as a propeller.

High pressure underneath the aircraft and low pressure above it is produced by specially constructed wings used by airplanes.

The wing receives enough airflow through it by the use of a thrust-generating device, like a propeller, to overcome the weight and drag of the aircraft.

The differences between how living and non-living things fly;

1. Moving both living and non-living objects consumes energy. Flying animals utilize their wings to create both lift and propulsion by moving them in relation to the body.

In contrast to most air vehicles, where the components that generate lift, wings, and thrust engines or propellers are distinct, the wings stay stationary.

Animal aviators like birds as well as natural parachuters like patagial as well as human inventions like aircraft as well as rockets that can power spacecraft and spaceplanes are just a few examples of the many things that can fly.

Hence, birds, bats, insects, airplanes, rockets, and hot air balloons achieve their flight by creating high pressure below the aircraft and low pressure above it

To learn more about living and nonliving things, refer to https://brainly.com/question/7807759

#SPJ1

a straight current-carrying wire in a uniform magnetic field, oriented at right angles to the wire. The 0.25-m wire carries a 4.75-A current and experiences a force of 0.38 N. What is the strength of the magnetic field?
0.45 T
0.56 T
0.32 T
0.72 T

Answers

Hello!

Using the equation for the magnetic force on a current-carrying wire:
[tex]F_B = \vec{B} \times i\vec{L}[/tex]

[tex]F_B[/tex] = Magnetic Force (0.38 N)
B = Magnetic field strength (T)
i = Current in wire (4.75 A)
L = Length of wire (0.25 m)

This is a cross product, so we can rewrite the equation as:
[tex]F_B = BiLsin\phi[/tex]

Where φ is the angle between the magnetic field vector and the length vector. In this instance, since the field is perpendicular to the wire, sin(90) = 1. We can simplify the equation to:
[tex]F_B = BiL[/tex]

Rearrange the equation to solve for 'B':
[tex]B = \frac{F_B}{iL}[/tex]

Plug in given values and solve.

[tex]B = \frac{0.38}{(4.75 * .25)} = \boxed{0.32 T}[/tex]

The strength of the magnetic field will be 0.32 T.Option B is correct.

What is magnetic field strength?

The number of magnetic flux lines on a unit area passing perpendicular to the given line direction is known as induced magnetic field strength .it is denoted by B.

Given data:

(I) current = 4.75-A

(B)induced magnetic field strrength=?

(L)length of the wire=0.25-m

(F)Magnetic force=0.38 N

The strength of the magnetic field is found as:

[tex]\rm F_B=BILsin \theta \\\\\ \theta = 90^0 \\\\ \rm F_B=BIL \\\\[/tex]

Substitute the values:

[tex]\rm 0.38 = B \times 4.75 \times 0.25 \\\\\ B= \frac{0.38}{4.75 \times 0.25 } \\\\\ B=0.32 \ T[/tex]

The strength of the magnetic field will be 0.32 T.

Hence, option B is correct.

To learn more about the strength of induced magnetic field refer ;

https://brainly.com/question/2248956

#SPJ1

A diffraction grating used in a spectrometer causes the third-order maximum of blue light with a wavelength of 490 nm to form at an angle of 6.33º from the central maximum (m = 0). What is the separation between the lines of the grating?

Answers

The separation between the lines of the grating is 13.33μm.

What is diffraction grating?

The diffraction grating is the continuous lines with very minute slits or grating space in mm.  It divides light composed of various wavelengths into light components by particular wavelength.

dsinθ = nλ

Substitute n =3, λ =490 x 10⁻⁹ m and angle θ =6.33°, we get

d = [3 x 490 x 10⁻⁹ /sin 6.33°]

d = 13.33 x 10⁻⁶ m

Thus, the separation between the lines of the grating is 13.33μm.

Learn more about diffraction grating.

https://brainly.com/question/10709914

#SPJ1

which one has the most potential energy

Answers

Answer:

A

Explanation:

A has the most potential energy as it is higher up so it has the most gravitational potential energy.

A student on a tower 49 m height drops a stone. One second later he throws a second stone after the first. They both hit the ground at the same time, with what speed did he throw the second stone. [Ans: 10.1m/s]​

Answers

By applying the second equation of motion, the speed at which he threw the second stone is equal to 12.10 m/s.

How to determine the speed?

First of all, we would calculate the time taken by the first stone to reach a height of 49 meters by applying the second equation of motion as follows:

S = ut + ½gt²

49 = 0(t) + ½ × 9.8 × t²

49 = 4.9t²

t² = 49/4.9

t = √10

t = 3.16 seconds.

Now, we can determine the speed at which he threw the second stone:

Note: Time = 3.16 - 1 = 2.16 seconds.

S = ut + ½gt²

49 = u(2.16) + ½ × 9.8 × 2.16²

49 = 2.16u + 22.86

2.16u = 49 - 22.86

u = 26.14/2.16

u = 12.10 m/s.

Read more on initial speed here: https://brainly.com/question/19365526

#SPJ1

if line segment g f = 3.2 ft, which is a possible measure of line segment t s? 1.6 ft 3.0 ft 3.2 ft 4.0 ft\

Answers

By applying the relationship of side lengths to interior angles in a triangle, a possible measure of line segment TS is 4.0 ft.

The relationship of sides to interior angles in a triangle.

In Geometry, the relationship of side lengths to interior angles in a triangle include the following:

The shortest side length is always opposite of the smallest interior angle.The longest side length is always opposite of the largest interior angle.

Based on the above theory, we can logically deduce that angle GF < TS or TS > GF because 42° is greater than 56°.

TS > 3.2 ft.

Therefore, a possible measure of line segment TS is 4.0 ft.

Read more on interior angle here: https://brainly.com/question/14379552

#SPJ1

Complete Question:

In the triangles, TR = GE and SR = FE. If Line segment G F = 3.2 ft, which is a possible measure of Line segment TS? 1.6 ft 3.0 ft 3.2 ft 4.0 ft.

For an object on a flat surface, the force of gravity is 15 newtons downward and the normal force is 15 newtons upward. The applied force is 10 newtons toward the left and the frictional force is 8 newtons toward the right. What is the magnitude and direction of the net force?
2 newtons toward the right
2 newtons upward
2 newtons toward the left
2 newtons downward

Answers

Answer:

There is a net force of 2 N to the left.

With 8 N to the left the up/down and left/right forces are in balance.

The force left over is 2 N to the left.

The diameter of the Earth is 12.7 x 10 6 m. The diameter of Mars is 6800 km.
The difference in the diameters of the two planets is:

Answers

Answer:

5.9 × 10⁶m

Explanation:

The diameter of the Earth is 12.7 ×10⁶m.We have to convert the diameter of the mars in the same exponent as that of the earth so that we can easily subtract.The diameter of mars = 6800km = 6800 × 10³ m = 6.8 × 10⁶mNow we can subtract the diameters.The difference between the diameters = (The Diameter of Earth - The diameter of Mars)

                         = 12.7×10⁶ - 6.8 × 10⁶

                         = 5.9 × 10⁶m

If you want to know something more about Unit conversion then you can refer: https://brainly.in/question/24914081

What name carries the hypothetical artificial megastructure surrounding a star in order to capture its power?.

Answers

A Dyson sphere is a hypothetical megastructure that completely encompasses a star and captures a large percentage of its solar power output.

Relate a real life phenomena with each branch of physics..

Answers

Answer:

Absolutely no real-life phenomena/ uses are possible that are related to any branch of physics, except:

1 The device you are reading this answer on. (quantum mechanics, electronics )

2 The air conditioner in your room. ( electromagnetism, electronics )

3 The satellites and space stations in space which will help in the deciphering of the universe will help us look for a suitable planet when we render the earth useless. ( general and special relativity, classical mechanics )

4 Ohh. I forgot, do you wear clothes, well they are made in factories where factories run on the principles of thermodynamics, which is physics.

5 Ever gone somewhere? Well, the transportation uses classical mechanics, thermodynamics, electromagnetism, relativity ( if you know Global Positioning System )

6 GPS itself! It’s used in online maps, navigating, and this sort of stuff. It works on general relativity.

Honestly, this list is endless.

What is a car’s acceleration if it increases its speed from 5 m/s to 20 m/s in 3 s? 10 m/s2 –15 m/s2 15 m/s2 5 m/s2

Answers

Answer:

5 m/s²

Explanation:

Acceleration = change in speed/time taken

20-5=15

15/3= 5 m/s²

What do echolocation and ultrasounds have in common?

Answers

They both are mechanical waves.

Explanation:

Echolocation and ultrasounds are both mechanical waves that require a medium to trace through. They both process and transfer information through waves; the difference is that we humans cannot hear ultrasound waves.

Can you explain why number 3 is correct?
Q19. Which waves would be found at the surface at regions A and C?
1. P waves
2. S waves
3. No waves
The correct answer was number 3. But I don’t know why :(

Answers

No waves because Q19 waves would going at the surface at regions

Try to solve this question:

Answers

Explanation:

w = mg

on earth

w = mg

w = 60 × 9.8 = 588 N

on moon

w = mg

w = 60 × 1.6 = 96 N

on Mars

w = mg

w = 60 × 3.7 = 222 N

Given data:Mass of object=60kggravity on earth=9.8ms^2gravity on moon=1.6ms^2gravity on mars=3.7ms^2RTC=Weight of object on earth,mars and moon.SOLUTION

In this question,we solve it using the formulae below:

W=mg.

So to find the weight of the object in 1.Earth.Enter the given data on formula:

W=mg

W=60×9.8

W= 588N.

2.Weight on the moon.

W=mg

W=60×1.6

W=96N

3.Weight on Mars.

W=mg

W=60×3.7

W=222N.

If you wanted to
reduce the resistance
in a circuit, what
should you do?
A. increase the length of the wire
B. replace a steel wire with a copper wire
C. replace a wide wire with a thin wire

Answers

Answer:

Option C

Explanation:

According to the formula

[tex]\\ \boxed{\sf R=\rho\dfrac{\ell}{A}}[/tex]

So

If we use wide wire we increase the area of cross section so resistance decreases

1. What is the relationship between mass, weight and gravity?

Answers

Answer:

Mass

The kilogram (kg) is the SI unit of mass and it is the almost universally used standard mass unit.

Gravity and weight

Since the acceleration due to the force of gravity (g) equals aproximately 9.8 meters/s2, the weight of an object with a mass of 1 kilogram is 9.8 newtons under standard conditions on the Earth's surface.

Answer:

The mass of an object is a measure of the object's inertial property, or the amount of matter it has in it

The weight of an object is a measure of the force/impact  exerted on the object by gravity, or the force needed to support it

The pull of gravity on the earth gives an object a downward acceleration of about 9.8 m/s2.

Hope This Helped

A train traveling at 50m/s comes to a complete stop in 45 seconds. what was the rate of acceleration of the train?

Answers

The magnitude of the acceleration of the car is determined as 1.11 m/s².

Acceleration of the train

The acceleration of the train is determined as the rate of change of velocity with time.

The magnitude of the acceleration of the car is calculated as follows;

a = v/t

a = 50/45

a = 1.11 m/s²

Thus, the magnitude of the acceleration of the car is determined as 1.11 m/s².

Learn more about acceleration here: https://brainly.com/question/605631

#SPJ1

How does the force of gravity vary with distance

Answers

The force of gravity vary inversely with square of distance between two objects.

What is gravity?

The force of attraction felt by a person which is directed at the center of a planet or Earth is called as the gravity.

The force of attraction is directly proportional to the product of masses of the object and inversely proportional to the square of distance between them.

F = GMm/d²

here G is the gravitational constant.

If the distance changes, the force of gravitation changes. The mass remains the same.

Thus, the force of gravity vary inversely with square of distance between two objects.

Learn more about gravity.

brainly.com/question/4014727

#SPJ1

Consider the soccer ball is kicked toward a goal at a speed of 35 mph and an angle of 25 ° from horizontal, what is the maximum height the ball will reach? Is this height more than a standard soccer goal's height, which is 8 feet from the ground?

(Recall: 1 mile = 1,609 meters and 1 hr = 3,600 s and 1 ft = 0.3048 meters)

Answers

The maximum height the ball will reach 7.316 ft. This height is less than a standard soccer goal's height.

What is projectile?

When an object is thrown at an angle from the horizontal direction, the object is said to be in projectile motion. The object which follows the projectile motion is called the projectile.

Maximum height reached is given by

H = u²sin²θ /2g

where, u = initial velocity, θ is the angle of projection and g is the gravitational acceleration.

Consider the soccer ball is kicked toward a goal at a speed of 35 mph and an angle of 25 ° from horizontal,

Given is the speed 35mph = 35 x 1609/3600 = 15.65 m/s, θ =25 ° and g = 9.81 m/s²

Substituting the values, we get

H = (15.65)² (sin25 °)² / 2 x 9.81

H = 2.23 m

in feet, H = 7.316 ft

Thus, the maximum height is 7.316 ft. This height is less than  a standard soccer goal's height, which is 8 feet from the ground.

Learn more about projectile.

https://brainly.com/question/11422992

#SPJ1

Are there conditions under which the incident light ray undergoes reflection but not transmission at the boundary? if so, then what are those conditions?

Answers

Total internal reflection causes light to be completely reflected across the  boundary between the two media but not transmitted.

What is total internal reflection?

The term total internal reflection occurs when light is moving from a denser to a less dense medium such as from glass to air. This phenomenon occurs at the interface between the two media.

There are two conditions necessary for total internal reflection and they are;

1) Light must travel from a denser to a less dense medium

2) The angle of incidence in the denser medium must be greater than the critical angle.

Total internal reflection causes light to be completely reflected across the  boundary between the two media but not transmitted.

Learn more about total internal reflection:https://brainly.com/question/13088998

#SPJ1

please help me with this

Answers

It’s the velocity to the trex then divided by pie to get 8.3

A spinning turbine at an electrical plant produces energy that flows through wires to your house. The energy in the wires can be used to light up a computer screen. In this example, what type of energy transformations occurred

Answers

The spinning turbine converts mechanical energy into electrical energy that is converted into light energy used to light up the house.

What is law conservation of energy?

The law of conservation of energy states that energy can neither be created nor destroyed but can be transformed from one form to another.

The spinning turbine works on the principle of mechanical energy.

Thus, the spinning turbine converts mechanical energy into electrical energy that is converted into light energy used to light up the house.

Learn more about mechanical energy here: https://brainly.com/question/24443465

#SPJ1

Other Questions
The grants witnessed strong selection during droughts in 1977 and 1985. compare the two droughts.select all that apply.select all that apply.in both droughts, large-beaked medium ground finches had the highest survival rates.in both droughts, small-beaked medium ground finches had the highest survival rates.both droughts resulted in changes to food sources that favored the survival of some medium ground finches over others.both droughts events provided strong natural selection on medium ground finch populations. Match each rational expression to its simplest form.2m2-4m2(m2)m2-2m+1m-1m-mm-1EEmm-3m +2m2.mmmResetm-m-2m-1Next 1. Kimi Skuban deposits $2,000 at the beginning of each year into an Individual Retirement Account atBoise Bank. The account pays 7% compounded annually. How much will be in the account in 25 years? 3. identify and explain a cause and effect relationship associated with the ideas or events in documents 1 and 2. be sure to use evidence from both documents 1 and 2 in your response. What is the direct object in this sentence? in the beginning, charlie misspelled many words in his journal help me please if you love your mom Find the mean and median of the data. 31, 14, 18, 26, 17, 32 Find the width of the river in Figure 20.18 to the nearest metre. This country and the chairs they experience after their independence was , in part due to lack of experience in democratic self -government I WILL MARK BRAINLIEST IF ANSWER CORRECTLY NO LINKS How did the bill of rights provide continuity when it was created? After Columbuss discovery of a new land, the French began to cross the Atlantic to a. claim new territory. b. trade in gold. c. fish for cod. d. escape religious persecution. Please select the best answer from the choices provided A B C D A cross was performed, and the offspring shownto the right were produced. What is the most likelygenotype for the parents?OBbee x bbEEOBbEEx BbeeOBbEex BbEeBBEE x bbeeDONE10 mice withblack fur, black eyes3 mice withwhite fur, black eyes2 mice withblack fur, red eyes1 mouse withwhite fur, red eyes A Three-Point TurnChapter 1"You know, hardly anyone ever needs to do a three-point turn anymore," said Justin, trying to help Becky calm down."Oh, so it's not a useful skill AND I am probably going to fail the driving test because I can't do it anyway," Becky said, raising her voice for emphasis. "That should make me feel like a million bucks when I flunk."Justin was riding with Becky so she could take her driving test. He had volunteered for the job because he thought she would be less nervous with him than with their mom, but so far, he wasn't sure he was making any difference."Slow down, your turn is coming up here," he said, looking ahead."I know, I know," she replied, "I've been here before rememberthe last time I flunked."Justin was pretty sure if he had let her miss the turn, things would only have deteriorated further, but he wasn't sure he was fond of being the scapegoat for Becky's anxiety."Listen, you need to take a few deep breaths," he said, hoping he could help her at least relax a bit. "Being nervous won't help you with the three-point turn or anything else you have to do. Hey, did you just take that turn without your turn signal on?" This was going to be harder than he thought."Stop yelling at me," Becky replied, clearly frustrated, "I can't concentrate.""Look, you need to stop and get yourself together here," Justin started. "It is not just about passing the driving test. I don't want to get in an accident, so pull into that parking lot."Becky drove into the office building's parking lot where Justin was pointing. Justin knew they were less than a mile from the licensing office, and if she continued in this condition, he'd be having this same discussion three months from now when she tried the test again for the third time."You need to get a grip," he started after she put the car in park, "because you have studied and practiced driving all year. You know this stuff inside and out, backwards and forwards. What are you so nervous about?""I don't know, I don't know," Becky wailed, resting her head on the steering wheel. "I just get so tired of failing."Listening quietly as Becky sobbed, Justin realized this was about much more than a driving test. He also knew if he didn't find a way to help Becky things would just get worse.Chapter 2Justin took a deep breath and collected his thoughts. Becky was an unbelievably consistent straight-A student. It was Justin who got the bad grades in school, and Justin who had to repeat every math class he'd ever taken. It was Justin who wished he could get the grades Becky got. Some things came easier for Justin: He was athletic, handy with tools, and good at making the best of whatever life threw at him. Mom called him her "lemons into lemonade" kid. But for the most part, Becky succeeded easily, whereas Justin had to work and work to just get a passing grade.Rather than having Becky catalogue all the things she supposedly "failed" at, Justin decided to try an alternative approach, one that wouldn't remind him of all the ways he had failed."Okay, Becky, let's assume for a moment you fail this test again. What is the worst thing that could happen?" he asked."I would be the oldest kid at school without a license and be humiliated," she replied. Justin thought he heard a bit of panic in her voice but continued with his plan."Yes, but won't we still have to drive to school together for at least one more year anyway?" he asked."Yes, but..." she started."And who will know, if you don't tell anyone except your friends, that you don't have your license? You know Mom can't afford another car just for you, right?""Yes," she said quietly."So what difference does it make, really," he said. "Another three months to wait in the grand scheme of your life doesn't seem like all that long, right?""I suppose not," she said.Justin could tell she was breathing more slowly now. "Besides," he said, "I would miss all the practice driving with you," and for good measure he reached over and pinched her arm."Ow," she said, hitting back at him, "that hurt.""So let's go do this, okay?"Okay," she said. Becky cranked up the car, backed slowly out of the parking spot and drove up to the parking lot's exit. Justin noticed, as they waited for the traffic to clear, that she had remembered the turn signal.Which comparison is correct? Chapter 1 ends as the rising action is completed. Chapter 2 ends with the story's climax. Chapter 1 ends when the plot is nearing its climax. Chapter 2 ends with the resolution of the story. Chapter 1 ends when the conflict is resolved. Chapter 2 ends with a new conflict. Chapter 1 ends with description and exposition. Chapter 2 ends with the climax of the action. Which policy could be used to increase energy efficiency across the electric sector?Group of answer choicesA. Require home and commercial appliances to meet efficiency standards that increase over time.B. Provide consumers and businesses with information about the relative energy efficiency of different appliances and estimated lifetime cost savings.C. Subsidize home energy efficiency upgrades such as home insulation and efficient appliances.D. All of the answers are correct. please explain and give examples of finite verbs Describe the structure and the function of the stomach. Be sure to include cells and tissues relating to this organ. Choose the correct complement (object pronoun) to complete the answer to the following question.Le regalan flores (los chicos a ella)?S, ___ las regalan. me te le se If you roll a dice four times, what is the chance that you roll two 3s? What is the median of the data set? 16, 21, 28, 30, 40, 45, 54, 58 A. 58 . 35 C. 10 D. 19 what makes boadiceas character a warrior acrchetype?