Answer:
17 mc/L
Explanation:
We habe heat that is taken by the ice for it to melt to be equal to the heat given by water.
ML = mc(290K - 273K)
ML = mc 17
Then we divide through by L
M = 17 mc/L
Please note that 273k as we have used in thIs solution is the temperature at which we can have water to freeze
Therefore the minimum mass of required ice = 17 mc/L
An arrow is fired at a target on a high wal. How does the energy change between the moment the arrow is fired and the
moment it hits the target?
O The potential energy and kinetic energy remain the same.
O The potential energy decreases as kinetic energy increases.
O The kinetic energy decreases as potential energy increases.
O The kinetic energy remains at zero, but potential energy increases.
Answer: answer is C on Edge
Explanation:
An arrow is fired at a target on a high wal. The energy change between the moment the arrow is fired and the moment it hits the target is the kinetic energy decreases as potential energy increases. The correct option is c.
What is energy change?Energy neither be created nor destroyed. It just only is transferred from one form to another form. This is called energy change. When any reactions happen, one form of energy is changed into another form.
There are many kinds of energy. These energies are kinetic energy, potential energy, gravitational energy, etc. Kinetic energy is the energy that is used when any work is done. Potential energy is the energy that is stored form of energy.
Therefore, the correct option is c, The kinetic energy decreases as potential energy increases.
To learn more about energy change, refer to the link:
https://brainly.com/question/22255429
#SPJ6
calculate the molar mass of iron oxide
Explanation:
The molar mass of iron oxide is 159.7 ghope it helps you
Which action is necessary for a solar eclipse to occur?
Answer:
Moon has to be in-between the Earth and the Sun.
2. Moon's umbra should sweep your place.
3. Latitude and longitude of your place should be within the befitting limits.
Which of the following conditions does not affect equilibrium?
A. Particle Size
B. None of these
C. Concentration
D. Pressure
Answer:
B. None of these
Explanation:
I will give Branliest! This is a breakoutedu thing and I can't figure this out for the life of me! Please help!
Answer:
I THINK ITS 9.8.0.6.6Explanation:
I HOPE IT HELPS :)
What would you use to determine whether an acid or alkali has been added to a solution?
A. Reactant
B. Indicator
C. Adjustor
D. Identifier
Answer:
B. Indicator
Explanation:
An indicator is used to determine whether an acid or alkali has been added to a solution.
Indicators can be liquid or a paper called litmus paper. There also some digital forms of indicators that can tell whether an acid or alkali has been added to a solution.
An acid and alkali will change the pH of a solution. pH is the amount of hydrogen ions that are in a solutionSo, these changes in the pH when an acid or alkali is introduced is usually monitored using indicators. Examples of indicators are litmus paper, methyl orange, methyl red, bromothymoblueWhat happens at the anode in an electrolytic cell?
A. Turning an ion into an uncharged atom
B. Melting
C. Reduction
D. Oxidation
Answer:
D. Oxidation
Explanation:
In an electrolytic cell, oxidation (the loss of electrons) takes place at the anode. At the cathode reduction takes place.
A mnemonic technique that could be used is that the process that starts with a vowel (Oxidation) takes place at the place that also starts with a vowel (Anode).
How many liters of CO2 gas can be produced at 30.0 °C and 1.50 atm from the reaction of 5.00 mol of C3H8 and an excess of O2 according to the following equation? C3H8 (g) + 5O2 (g) → 3CO2 (g) + 4H2O (g)
Answer:
249 L
Explanation:
Step 1: Write the balanced equation
C₃H₈(g) + 5 O₂(g) → 3 CO₂(g) + 4 H₂O(g)
Step 2: Calculate the moles of CO₂ produced from 5.00 moles of C₃H₈
The molar ratio of C₃H₈ to CO₂ is 1:3. The moles of CO₂ produced are 3/1 × 5.00 mol = 15.0 mol
Step 3: Convert "30.0°C" to Kelvin
We will use the following expression.
K = °C + 273.15
K = 30.0°C + 273.15 = 303.2 K
Step 4: Calculate the volume of carbon dioxide
We will use the ideal gas equation.
P × V = n × R × T
V = n × R × T/P
V = 15.0 mol × 0.0821 atm.L/mol.K × 303.2 K/1.50 atm
V = 249 L
how are the terms atom and element different?
Answer:
Element is made from same type of atoms
While atom is present in element made up of different particles like proton neutrons electron etc
Explanation:
What mass of solid aluminum hydroxide can be produced when 50.0mL of 0.200M aluminum nitrate is added to 200.0mL of 0.100M potassium hydroxide
Answer:
520 mg Al(OH)₃
Explanation:
The reaction that takes place is:
Al(NO₃)₂ + 3KOH → Al(OH)₃ + 3KNO₃Now we calculate how many moles of each reagent were added, using their concentrations and volumes:
Al(NO₃)₂ ⇒ 50.0 mL * 0.200 M = 10 mmol Al(NO₃)₂ KOH ⇒ 200.0 mL * 0.100 M = 20 mmol KOH10 mmol of Al(NO₃)₂ would react completely with (10*3) 30 mmol of KOH, there are not as many KOH mmol, so KOH is the limiting reactant.
We calculate how many moles of Al(OH)₃ are produced, using the limiting reactant:
20 mmol KOH * [tex]\frac{1mmolAl(OH)_3}{3mmolKOH}[/tex] = 6.67 mmol Al(OH)₃Finally we convert mmol of Al(OH)₃ to mg, using its molar mass:
6.67 mmol Al(OH)₃ * 78 mg/mmol = 520 mg Al(OH)₃Which is one piece of information that "9” gives about an atom of fluorine?
The atomic mass is different than the atomic number, and the number of neutrons is the difference between the atomic mass and the atomic number.
the atomic number
the atomic mass
the mass of protons
the number of neutrons
Answer:
The Atomic Number
Explanation:
What is the change in air pressure over a given distance called? wind speed air pressure force factor air pressure gradient
The change in pressure over a given distance is defined as a pressure gradient. The strength of this pressure gradient determines how fast the wind moves from higher pressure toward lower pressure. A stronger pressure gradient will cause stronger winds, as shown in Figure 2. >> Balanced in the vertical by the force of gravity
what is the empirical formula for a compound that is 40% S, and 59.9% O?
Answer:
O3S
Sulfur Trioxide
Explanation:
g A chemist must prepare of hydrochloric acid solution with a pH of at . He will do this in three steps: Fill a volumetric flask about halfway with distilled water. Measure out a small volume of concentrated () stock hydrochloric acid solution and add it to the flask. Fill the flask to the mark with distilled water. Calculate the volume of concentrated hydrochloric acid that the chemist must measure out in the second step. Round your answer to significant digits.
The question is incomplete, here is the complete question:
A chemist must prepare 550.0 mL of hydrochloric acid solution with a pH of 1.60 at [tex]25^oC[/tex]. He will do this in three steps: Fill a 550.0 mL volumetric flask about halfway with distilled water. Measure out a small volume of concentrated (8.0M) stock hydrochloric acid solution and add it to the flask. Fill the flask to the mark with distilled water. Calculate the volume of concentrated hydrochloric acid that the chemist must measure out in the second step. Round your answer to 2 significant digits.
Answer: The volume of concentrated hydrochloric acid solution is 1.7 mL.
Explanation:
To calculate the hydrogen ion concentration, we use the formula:
[tex]pH=-\log [H^+][/tex]
We are given:
pH = 1.60
Putting values in above equation, we get:
[tex]1.60=-\log [H^+][/tex]
[tex][H^+]=antilog (-1.60)[/tex]
[tex][H^+]=0.0251M[/tex]
To calculate the volume of concentrated solution, we use the equation:
[tex]M_1V_1=M_2V_2[/tex]
where,
[tex]M_1\text{ and }V_1[/tex] = molarity and volume of concentrated acid solution
[tex]M_2\text{ and }V_2[/tex] = molarity and volume of diluted acid solution
We are given:
[tex]M_1=8.0M\\V_1=?mL\\M_2=0.0251M\\V_2=550mL[/tex]
Putting values in above equation, we get:
[tex]8.0\times V_1=0.0251\times 550\\\\V_1=\frac{0.0251\times 550}{8.0}=1.7mL[/tex]
Hence, the volume of concentrated hydrochloric acid solution is 1.7 mL.
Would you expect oxygen (O) to react more like sulfur (S) or nitrogen (N)? Support your prediction with evidence .
Answer:
Sulfur
Explanation:
Oxygen like sulfur would chemical react and combine with other compounds in the same way. This is because they are both located in the same group on the periodic table.
Elements in the same group have the same chemical properties and they will react the same way.
The general formula of the elements in this group are ns² np⁴.
All the elements in this group have 4 electrons in their np⁴ shell and they belong to the p-block.
Light is a form of _____? A. gamma rays B. sound C. energy D. radio waves
Answer:
Explanation:
Energy
Identify the characteristics of a good recrystallization solvent. Select one or more: Is not an organic liquid with a low boiling point. Dissolves a chemical sample well at high temperatures. Does not dissolve a chemical sample well at high temperatures. Does not dissolve a chemical sample well at low temperatures. Dissolves a chemical sample well at low temperatures.
Answer:
Dissolves a chemical sample well at high temperatures.
Does not dissolve a chemical sample well at low temperatures.
Explanation:
Recrystallization is a purification technique that involves mixing of an impure solid compound with a hot solvent leading to a saturated solution. As this solution cools, the compound to be purified becomes less soluble in the solvent, and pure crystals appear from the solution as the solution cools.
A good recrystallization solvent should
Not dissolve the compound that we want to purify at room temperature Dissolve the compound completely only at the solvent's boiling point Dissolve all the soluble impurities in the sample very well at room temperature.Have a fairly low boiling point such that its boiling point is lower than the melting point of the compound to be purified and evaporates easily when air-drying the sample.Which of these is not a property of minerals?
A) Clevage
B) Fracture
C) Color
D) Smell
ANYONE CAN HELP ME WITH THIS PLEASE ?
Answer:
0.2g
Explanation:
mass=mole/molar mass
molar mass of oxygen is 32
6.06/32=0.19 or 0.2 units=grams
The compound sodium nitrate is a strong electrolyte. Write the transformation that occurs when solid sodium nitrate dissolves in water.
Answer and Explanation:
Since the compound sodium nitrate (NaNO₃) is a strong electrolyte, it dissociates completely into ions when is dissolved in water, as follows:
NaNO₃(s) → Na⁺(aq) + NO₃⁻(aq)
So, the solid compound produces the sodium cation (Na⁺) and the nitrate anion (NO₃-) in the aqueous medium.
How many moles of NaHCO3 are there in a 3g tablet of Alka-Selzer?
An animal is an example of a/an-
A: tissue
B:cell type
C:organ
D:organism
Answer:
D
Explanation:
organism
Answer:
The answer should be organism
two reason that show sugar is compound
Answer:
Table sugar, or sucrose, is a compound because it's formed when two or more elements are joined together. Its chemical formula is C12H22O11, and it contains carbon, hydrogen and oxygen. More specifically, each molecule of sugar has 12 carbon atoms, 22 hydrogen atoms and 11 oxygen atoms.
Explanation:
hope this helps
18.0 mL of water contains 6.022 x 1023 water molecules. How many hydrogen atoms are in 1.00 L of water? (Each water molecule, H2O, contains two hydrogen atoms.)
Solution :
lt is given that in 18 mL of water their are [tex]6.022\times 10^{23}[/tex] water molecules.
We know, that 1 molecule of water contains 2 atoms of hydrogen.
Hydrogen atom in 18 mL water is,
[tex]2\times 6.022\times 10^{23} = 12.044 \times 10^{23}[/tex] .
So, number of hydrogen atoms in 1 L = 1000 mL are :
[tex]N = \dfrac{1000}{18}\times 12.044\times 10^{23}\\\\N = 6.69 \times 10^{25}\ atoms[/tex]
Hence, this is the required solution.
Which method would be best for separating the components of a mixture that is made from two different liquids?
O distillation
evaporation
filtration
sorting
Answer:
I think you should use distillation cauze it helps to separate two mixtures
Answer:
A.) distillation
Explanation:
edge 2021
One mole of a substance has a different number of particles as one mole of another substance.
O True
O False
An isotope has three forms. 30% have a mass of 4 amu, 20% have a mass of 5 amu and
50% have a mass of 3 amu, Average atomic mass will be closest to
The average atomic mass will be 3.70 amu
We have to obtain the average atomic mass by multiplying the mass of each isotope in amu by the relative abundance of the given isotope as contained in the data of the question.
Hence;
Average atomic mass;
(0.30 * 4) + (0.20 * 5) + (0.50 * 3)
= 1.20 + 1.00 + 1.50
= 3.70 amu
https://brainly.com/question/13292428
Throwing a snowball during snowball fight is most like an example of
Two inductors are connected in series to a 120 volt, 60 Hz line. The values are .75 H and 1.47 H. The total inductive reactance is
Answer:
837.02 ohms
Explanation:
Step one:
Given data
Frequency= 60Hz
L1= 0.75H
L2= 1.47H
When inductors are connected in series, the total inductance is the sum of the individual inductance
Step two:
Inductor 1
[tex]Xl1= 2\pi fL\\\\Xl1= 2*3.142*60*0.75\\\\Xl1= 282.78 ohms[/tex]
Inductor 2
[tex]Xl2= 2\pi fL\\\\Xl2= 2*3.142*60*1.47\\\\Xl2= 554.24 ohms[/tex]
The total inductance is
=282.78+554.24
=837.02 ohms
What is molarity measured the concentration of