A horizontal force of 100 N is applied to move a 45-kg cart across a 9.0-m level surface. What work is done by the 100-N force? a. 405 J b. 500 J c. 900 J d. 4 500 J

The lattice planes with Miller indices (100) and (011) in a simple cubic lattice are perpendicular to each other.

The lattice planes with Miller indices (100) and (011) can be sketched as follows:

(100) plane:

The plane intercepts the x-axis at (1,0,0).

The plane is parallel to the yz-plane, and hence its normal vector is along the x-axis.

The plane intersects the yz-plane at the midpoint of the y and z axes.

The lattice points located at the corners of the cube lying on the plane are connected to form a square.

(011) plane:

The plane intercepts the x-axis at (0,1,1).

The plane is not parallel to any of the coordinate planes, and hence its normal vector has non-zero components in all three directions.

The plane intersects the yz-plane at the points where the y and z coordinates are equal.

The lattice points located at the corners of the cube lying on the plane are connected to form a rhombus.

Lattice planes are a fundamental concept in crystallography, which is the study of the arrangement of atoms in crystals. A crystal lattice is a three-dimensional arrangement of points, known as lattice points, which represent the positions of the atoms in the crystal. A lattice plane is a plane that contains a row of lattice points.

In crystallography, lattice planes are important because they determine the physical properties of a crystal. For example, the angle between two adjacent lattice planes determines the diffraction pattern of X-rays that are scattered by the crystal. The diffraction pattern provides information about the crystal structure, such as the spacing between atoms.

To learn more about Lattice planes visit here:

brainly.com/question/31489989

#SPJ4

The KE of the solid ball is approximately 0.000879 Joules, where KE is the kinetic energy.

To calculate the kinetic energy of the solid ball, we need to use the formula:

KE = (1/2) * I * ω^2

where KE is the kinetic energy, I is the moment of inertia, and ω is the angular velocity.

For a solid ball rotating about its diameter, the moment of inertia can be calculated as:

I = (2/5) * m * r^2

where m is the mass of the ball and r is the radius (half of the diameter).

So, substituting the given values, we get:

r = 0.05 m
m = 1.6 kg
ω = (67 rev/min) * (2π rad/rev) * (1 min/60 s) = 7.03 rad/s

I = (2/5) * 1.6 kg * (0.05 m)^2 = 0.0004 kg m^2

KE = (1/2) * 0.0004 kg m^2 * (7.03 rad/s)^2 = 0.000879 J

Therefore, the kinetic energy of the rotating solid ball is approximately 0.000879 Joules.

Learn more about Kinetic energy here: brainly.com/question/26405082

#SPJ11

Part A: Kinetic energy Ek ≈ 9.38 eV

Part B: Momentum p ≈ 50.20 × [tex]10^{-46}[/tex] kg m/s

Part C: Speed v ≈ 7.51 c

We have,

Given that the proton's total energy is 4.00 times its rest energy, we can use Einstein's mass-energy equivalence equation to find the kinetic energy (Ek):

E = γm₀c²

Where:

E is the total energy

γ is the Lorentz factor (γ = 1 / √(1 - v²/c²))

m₀ is the rest mass

c is the speed of light

Since E = 4m₀c²:

γm₀c² = 4m₀c²

Solving for γ:

γ = 4

Now we can find the kinetic energy (Ek):

Ek = E - m₀c² = (γ - 1)m₀c²

Let's proceed with the calculations:

Part A:

Ek = (γ - 1)m₀c² = (4 - 1)m₀c² = 3m₀c²

Given that m₀ = 1.67 × 10⁻²⁷ kg and c = 3 × 10⁸ m/s:

Ek = 3 * (1.67 × 10⁻²⁷ kg) * (3 × 10⁸ m/s)² = 15.03 × [tex]10^{-19}[/tex] J

To convert Joules to electron volts (eV), use the conversion factor:

1 eV = 1.60218 × 10⁻¹⁹ J:

Ek = (15.03 × [tex]10^{-19}[/tex] J) / (1.60218 × 10⁻¹⁹ J/eV) ≈ 9.38 eV

Part B:

The momentum (p) of the proton can be calculated using its kinetic energy (Ek) and the relation between energy and momentum:

p = √(2m₀Ek)

Substitute the values:

p = √(2 * 1.67 × 10⁻²⁷ kg * 15.03 × [tex]10^{-19}[/tex] J) ≈ 50.20 × [tex]10^{-46}[/tex] kg m/s

Part C:

The speed (v) of the proton can be found using its momentum (p) and the formula for relativistic momentum:

p = γm₀v

Solve for v:

v = p / (γm₀) = (50.20 × [tex]10^{-46}[/tex] kg m/s) / (4 * 1.67 × 10⁻²⁷ kg) ≈ 7.51 c

Therefore:

Part A: Kinetic energy Ek ≈ 9.38 eV

Part B: Momentum p ≈ 50.20 × [tex]10^{-46}[/tex] kg m/s

Part C: Speed v ≈ 7.51 c

Learn more about Einstein's mass-energy relations here:

https://brainly.com/question/15991401

#SPJ12

Yes I agree. The socio historical concept implies that race is created and maintained through systems of power and inequality.

According to Michael Omi and Howard Winant, in "Racial Formations," race is a socio-historical concept that is constructed through the intersection of cultural, political, and economic forces.

In this book, they argue that race is not an immutable, biologically determined characteristic of individuals or groups but rather a social construct that is created and maintained through systems of power and inequality. The authors illustrate how race is constructed through examples from different historical periods and social contexts.

Learn more about race here: https://brainly.com/question/28138343

#SPJ1

To calculate the magnetic acceleration of an alpha particle with a mass of 6.6 × 10−27 kg and a charge of 3.2 x 10^-19 C, the magnetic of acceleration that the alpha particle will experience is a = 4.85 x 10^7 * (B)

we need to use the equation for magnetic acceleration, which is given by:

a = (q/m) * (B)

where q is the charge of the particle, m is its mass, and B is the magnetic field strength.

Substituting the given values, we get:

a = (3.2 x 10^-19 C) / (6.6 × 10−27 kg) * (B)

Simplifying, we get:

a = 4.85 x 10^7 * (B)

Therefore, the magnetic acceleration of the alpha particle will depend on the strength of the magnetic field it is subjected to. The greater the strength of the magnetic field, the greater the magnetic acceleration experienced by the particle.

To know more about magnetic acceleration: https://brainly.com/question/460763

#SPJ11

The current I in the solenoid windings if an ideal solenoid is wound with 470 turns on a wooden form that is 4.0 cm in diameter and 50 cm long is 3.5 A (Option A).

To find the current I in the solenoid windings, you can use the formula for the magnetic field of an ideal solenoid: B = μ₀ × n × I, where B is the magnetic field, μ₀ is the permeability of free space, n is the number of turns per unit length, and I is the current.

Given values are:

B = 4.1 mT = 4.1 × 10⁻³ T
μ₀ = 4π × 10⁻⁷ T × m/A
Total turns N = 470
Length of solenoid L = 50 cm = 0.5 m

First, find the number of turns per unit length:
n = N / L = 470 / 0.5 = 940 turns/m

Now, plug in the values into the formula:
4.1 × 10⁻³ T = (4π × 10⁻⁷ T × m/A) × 940 turns/m × I

Solve for I:

I = (4.1 × 10⁻³ T) / [(4π × 10⁻⁷ T × m/A) ÷ 940 turns/m]

≈ 3.5 A

So the current I in the solenoid windings is approximately 3.5 A (option A).

Learn more about current: https://brainly.com/question/29341584

#SPJ11

The work done on the cart by the spring is equal to its change in kinetic energy. There is no loss due to friction.

According to the work-energy principle, the work done on an object is equal to its change in kinetic energy. In the case of a cart attached to a spring, when the spring is compressed and then released, it applies a force to the cart and does work on it, causing the cart to accelerate and gain kinetic energy.

The amount of work done by the spring is given by the formula W = (1/2)kx^2, where k is the spring constant and x is the displacement of the spring from its equilibrium position.If there is no friction present, then all the work done by the spring is converted into the kinetic energy of the cart. Therefore, the work done on the cart by the spring is equal to its change in kinetic energy.

To know more about kinetic energy, click here.

https://brainly.com/question/26472013

#SPJ4

The allowable torque T if the thickness of the outer skin is 12mm and the thickness of the inner web is 6mm is 3.78 kN-m.

To calculate the allowable torque T, we need to first determine the shear stress and angle of twist in the beam. Using the given information, we can calculate the shear flow in each segment of the cross-section as follows:

a. For the top segment:

q = V / (t * b)

where V is the shear force, t is the thickness of the segment (12mm), and b is the width of the segment (half of the overall width of the beam, which we don't know yet).

From the given torque values, we can calculate the shear force:

V = (Taw - To) / (d / 2)

where d is the distance between the segments, which is given as 119-91 = 28mm.

Plugging in the values, we get:
V = (245.8 - 145.3) / (28 / 1000 / 2)

= 36100 N

Now we can calculate the width of the segment:

b = (Taw - To) / (t * q)

Plugging in the values, we get:

b = (245.8 - 145.3) / (12 / 1000 * 36100)

= 0.156 m

b.For the bottom segment:

q = V / (t * b)

Using the same values as before, we get:

q = 36100 / (6 / 1000 * 0.156)

= 385986 N/m (Note that this value is negative because the shear flow direction is opposite to the one assumed.)

Next, we can calculate the maximum shear stress in the beam:

τmax = q / h

where h is the distance between the neutral axis and the outer skin, which is given as 6 + 12 / 2 = 12 mm.

Plugging in the values, we get:

τmax = 385986 / (12 / 1000) = 32165.5 Pa

Converting to MPa, we get:

τmax = 32.165 MPa

To check if this value is within the allowable limit of Tall-60MPa, we need to calculate the safety factor:

SF = Tall / τmax

Plugging in the values, we get:

SF = 60 / 32.165

= 1.865

Since the safety factor is greater than 1, the shear stress is within the allowable limit.

Finally, we can calculate the allowable angle of twist using the formula:

θ = T * L / (G * J)

where L is the length of the beam (4m), and J is the polar moment of inertia of the cross-section.

For a solid circular section, J = π/2 * (R⁴ - r⁴), where R is the outer radius and r is the inner radius.

In our case, we don't have a circular section, but we can approximate it as one with an equivalent radius:

J ≈ π/2 * (R⁴ - r⁴)

where R = (12 + 6) / 2 = 9 mm and r = 6 mm.

Plugging in the values, we get:

J ≈ 4.05e⁻⁸ m⁴

Now we can calculate the allowable torque T:

T = θ * G * J / L

Plugging in the values, we get:

T = 3° * π/180 * 28e⁹ Pa * 4.05e⁻⁸ m⁴ / 4 m

T ≈ 3.78 kN-m

Therefore, the allowable torque for the given beam is approximately 3.78 kN-m.

Learn more about torque: https://brainly.com/question/29024338

#SPJ11

Newton's second law, which states that the force acting on an object is equal to its mass times its acceleration is ma = -F(x). The rate of energy dissipation can be found by dE/dt = Fconsv - bv²

(a) If the total mechanical energy of a particle of mass m moving in one dimension under the influence of conservative forces is E = mv²/2 + U(x), and the law of conservation of energy holds true, then:

dE/dt = d(mv²/2)/dt + dU(x)/dt = 0

Using the product rule for differentiation and the chain rule, we get:

d(mv²/2)/dt = mvdv/dt = ma

dU(x)/dt = ∂U(x)/∂x * dx/dt = F(x)

Therefore, we can rewrite the equation above as:

F(x) + ma = 0

Or, equivalently:

ma = -F(x)

This is Newton's second law, which states that the force acting on an object is equal to its mass times its acceleration.

(b) The rate of energy dissipation can be found by calculating dE/dt:

dE/dt = d(mv²/2)/dt + dU(x)/dt - bvdv/dt

Using the chain rule and product rule for differentiation, we get:

d(mv²/2)/dt = mvdv/dt = ma

dU(x)/dt = ∂U(x)/∂x * dx/dt = Fcons

bvdv/dt = bv(dv/dt) = bva

Therefore, we can rewrite the equation above as:

Fcons + ma - bva = 0

Or, equivalently:

ma = Fcons - bv(dv/dt)

dE/dt = Fconsv - bv²

when the damping force is absent (i.e., b = 0), the total mechanical energy is conserved and the rate of energy dissipation is zero.

Mechanical energy is the sum of potential and kinetic energy in a system that arises from the motion and position of objects. Kinetic energy is the energy an object possesses due to its motion, while potential energy is the energy an object has due to its position or configuration in a field, such as gravity or a spring.

Mechanical energy can be transferred from one object to another through work, which is the force applied over a distance. The work-energy principle states that the work done on an object equals its change in kinetic energy, which means that the total mechanical energy of a closed system remains constant if no external forces act on it.

To learn more about Mechanical energy visit here:

brainly.com/question/29509191

#SPJ4

a) Therefore, the drift speed is 5.47 × 10⁻⁵ m/s.

b) The mean time between collisions for electrons in this wire is 2.28 × 10⁻⁵ s.

a. To determine the drift speed v_d, we need to use the formula:

I = nAv_dq,

where I is the current, n is the electron density, A is the cross-sectional area of the wire, q is the electron charge, and v_d is the drift speed.

Rearranging this equation, we get:

v_d = I/(nAq)

Substituting the given values, we get:

v_d = (2.0 × 10¹⁷ electrons/s)/(2.0 × 10⁻⁶ m² × 2.9 × 10⁻⁴ V/m × 1.6 × 10⁻¹⁹ C)

v_d = 5.47 × 10⁻⁵ m/s

b. To determine the mean time between collisions, we need to use the formula:

t = l/v_d,

where l is the mean free path of the electrons in the wire.

The mean free path can be estimated using the formula:

l = 1/(nσ),

where σ is the electron collision cross-sectional area.

The electron collision cross-sectional area for aluminum can be estimated to be approximately 4 × 10⁻¹⁹ m².

Substituting the given values, we get:

l = 1/(2.0 × 10²⁸ m⁻³ × 4 × 10⁻¹⁹ m²)

l = 1.25 × 10⁻⁹ m

Substituting the value of l and the drift speed v_d, we get:

t = l/v_d

t = (1.25 × 10⁻⁹ m)/(5.47 × 10⁻⁵ m/s)

t = 2.28 × 10⁻⁵ s

To know more about mean free path click on below link:

https://brainly.com/question/27461108#

#SPJ11

The bar's angular velocity when theta = 0 is 2.68 rad/s.

To solve this, follow these steps:

1. Determine the potential energy (PE) of the system when theta = 60 degrees.
2. Apply conservation of mechanical energy, equating the initial PE to the final kinetic energy (KE) when theta = 0.
3. Find the bar's angular velocity using the conservation of energy principle and moment of inertia.

The initial potential energy is due to the height of the 2-kg slider and the center of mass of the 4-kg bar. Use trigonometry to find the heights and calculate the PE.

At theta = 0, the system has both rotational KE from the disk and translational KE from the slider and bar. Calculate the moment of inertia for the disk and use it along with the conservation of energy equation to solve for the angular velocity.

To know more about potential energy click on below link:

https://brainly.com/question/24284560#

#SPJ11

Up until now, 2/3 of the road has been finished and this part of the road is 3/4 of a mile long. So, when the road is a mile long, only 1/9 of the road will be complete.

First, we know that 2/3 of the road has been completed, and this portion is 3/4 of a mile long. We can represent this on a number line by dividing it into 12 equal parts (since 3/4 is equivalent to 9/12).

We can see that 2/3 of the road is equivalent to 8/12 of the road, so we can represent the length of the entire road as 12 parts. This means that each part represents 1/12 of a mile.

To find the length of the entire road, we can use a ratio:

8/12 = 3/4

x/12 = 1/4    (since 1 - 2/3 = 1/3, which is equivalent to 4/12)

Solving for x, we get:

x = 3/4 * 12

x = 9

So the length of the entire road is 9 miles.

To find out what fraction of the road is complete when the road is 1 mile long, we can divide 1 by the length of the entire road: 1/9

So when the road is 1 mile long, 1/9 of the road will be complete.

Learn more about fractions here:

https://brainly.com/question/10354322

#SPJ1

Answer:

c

Explanation:

The time it takes for the sound to travel from the hiker to the cliff and back is equal to twice the time it takes the sound to travel from the hiker to the cliff:

t(total) = 2 * t(one way)

We know that the total time is 4.00 s, so:

4.00 s = 2 * t(one way)

t(one way) = 2.00 s

Using the formula for the speed of sound:

speed = distance / time

we can calculate the speed of sound in air as follows:

speed = distance / time(one way) = 685 m / 2.00 s = 342.5 m/s (to three significant figures)

Therefore, the speed of sound in this air is approximately 342.5 m/s. The correct answer is (c).

The angular speed of the coil is approximately 57.2 rad/s.

To find the angular speed, first, we need to determine the maximum magnetic flux (Φ_max) through the coil using Faraday's Law of electromagnetic induction. The equation for the maximum emf (ε_max) is:

ε_max = N * A * B * ω * sin(ωt)

where N is the number of turns (190), A is the area of the coil (1.40²), B is the magnetic field (8.70x10² T), ω is the angular speed, and t is the time. Since ε_max occurs when sin(ωt) = 1:

2.50x10² V = 190 * 1.40² * 8.70x10² T * ω

Now, we can solve for ω:

ω ≈ 57.2 rad/s

To know more about magnetic flux click on below link:

https://brainly.com/question/30858765#

#SPJ11

A- The ratio of the electric force on the bee to the bee's weight is 0.024, b. The electric field strength required for the bee to hang suspended in the air would be 240 N/C directed upward.

c. The necessary electric field direction for the bee to hang suspended in the air would be upward.

a. The electric force on the bee can be calculated using the formula F = qE, where F is the force, q is the charge, and E is the electric field.

F = (24 × 10⁻¹² C) × (100 N/C) = 2.4 × 10⁻⁹ N. The weight of the bee can be calculated using the formula w = mg, where w is the weight, m is the mass, and g is the acceleration due to gravity.

we get w = (0.10 × 10⁻³ kg) × (9.81 m/s²) = 9.81 × 10⁻⁵ N. Therefore, the ratio of the electric force on the bee to the bee's weight is F/w = (2.4 × 10⁻⁹ N)/(9.81 × 10⁻⁵ N) ≈ 0.024.

b. To hang suspended in the air, the electric force on the bee should balance its weight, so we have F = w. Using the formula F = qE, we can express the required electric field strength as E = F/q. Substituting the given values, we get E = (9.81 × 10⁻⁵ N)/(24 × 10⁻¹² C) ≈ 240 N/C directed upward.

c. Since the bee is positively charged, it will experience a force in the direction opposite to the electric field. Therefore, to hang suspended in the air, the electric field should be directed upward.

learn more about electric field here:

https://brainly.com/question/8971780

#SPJ4

The  initial temperature of the neon was 22.19°C when a sample of it is heated with an electrical coil and 238 joules of energy are added to a 14.9 gram sample.

To solve this problem, we can use the formula:
q = mcΔT where q is the amount of energy added, m is the mass of the neon, c is the specific heat capacity of neon (which is 1.03 J/g°C), and ΔT is the change in temperature.
First, we need to calculate the value of ΔT:
ΔT = (final temperature - initial temperature)
ΔT = (37.7°C - initial temperature)
Now we can plug in the values and solve for initial temperature:
238 J = (14.9 g) * (1.03 J/g°C) * (37.7°C - initial temperature)
238 J = 15.347 g°C * (37.7°C - initial temperature)
(37.7°C - initial temperature) = 238 J / 15.347 g°C
(37.7°C - initial temperature) = 15.51°C
initial temperature = 37.7°C - 15.51°C
initial temperature = 22.19°C

To learn more about temperature click here https://brainly.com/question/4160783

#SPJ11

Both central carbon atoms in C2H2 exhibit sp hybridization.

The hybridization of both central carbon atoms in C2H2, also known as ethyne or acetylene, is sp. In this molecule, each carbon atom is bonded to one hydrogen atom and the other carbon atom. Here's a step-by-step explanation:

1. Draw the Lewis structure of C2H2.
2. Identify the number of electron domains around each central carbon atom (bonds and lone pairs).
3. For each carbon atom, there is a triple bond with the other carbon atom and a single bond with a hydrogen atom, totaling 2 electron domains.
4. Based on the number of electron domains, the hybridization can be determined: 2 electron domains correspond to sp hybridization.

Learn more about Ethyne here: brainly.com/question/4225077

#SPJ11

The fluid's speed in the circular part of the tube = 4/π times the speed in the horizontal part of the tube.

The fluid's speed in the circular part of the tube is v1. Now, v1/v0=4/π, which means that it is 4/π times the speed in the horizontal part of the tube. This can be explained by the fact that the cross-sectional area of the circular part of the tube is π/4 times larger than that of the square part, which causes the fluid to slow down in order to maintain the same flow rate. Therefore, the speed decreases in the circular part of the tube due to the increase in cross-sectional area.

Visit https://brainly.com/question/18414240 To learn more about fluids

#SPJ11

If the temperature is high enough, the positive value of delta H would be greater than the negative value of T delta S, resulting in a positive delta G and a non-spontaneous reaction.

To determine the sign of delta G, we need to use the equation delta G = delta H - T delta S, where T represents temperature. Since delta H and delta S are both negative in this case, their product would be positive. The sign of delta G would depend on the temperature value. If the temperature is low enough, the negative value of T delta S would be greater than the positive value of delta H, resulting in a negative delta G and a spontaneous reaction.

In summary, the sign of delta G in the reaction A + B → AB, which has negative delta H and delta S, depends on the temperature. Delta G could be negative at low temperatures and positive at high temperatures.

To know more about Temperature refer here :

https://brainly.com/question/27944554

#SPJ11

Yes, that statement is correct. The larger container of water will have more heat energy available for heat conduction due to its larger volume and higher mass. This means that it will take longer to heat up or cool down compared to a smaller container with less water. Additionally, the larger surface area of the container also allows for more efficient heat transfer through convection and radiation. Therefore, a larger container of water can be more effective for providing heat to a space or conducting heat through a system.

Find out more about container

brainly.com/question/17229261

#SPJ11

In the given equation, x=2cos(50t), a particle moves in simple harmonic motion where x represents the displacement in meters and t represents the time in seconds. The maximum velocity of the particle is 100 m/s.

We can find the velocity function of the particle by taking the derivative of the position function with respect to time:

v(t) = -100sin(50t)

To find the maximum velocity, we need to find the maximum value of the absolute value of the velocity function. Since the sine function oscillates between -1 and 1, the maximum absolute value of the velocity function is 100 m/s.

This makes sense because in simple harmonic motion, the velocity is at its maximum when the displacement from the equilibrium position is zero (i.e. the particle is at the maximum displacement from the equilibrium position). In this case, the amplitude of the harmonic motion is 2, so the maximum displacement is 2 meters.

Using the equation for simple harmonic motion, we can find the period of the motion:

T = 2π/ω = 2π/50 ≈ 0.126 seconds

This means that the particle completes one full cycle of oscillation (i.e. goes from maximum displacement in one direction to maximum displacement in the other direction and back again) every 0.126 seconds.

Learn more about harmonic here:

https://brainly.com/question/9253932

#SPJ11

1) average power delivered to the circuit is 4.11 Watts. 2) the maximum power delivered to the circuit is 16.4 watts

To find the average power delivered to the circuit, we can use the formula Ohm's Law:
P_avg = V² / R
where P_avg is the average power, V is the voltage, and R is the resistance.
Substituting the given values, we get:
P_avg = (121²) / 3.53k
P_avg = 4.11 watts
Therefore, the average power delivered to the circuit is 4.11 watts.
To find the maximum power delivered to the circuit, we can use the formula:
P_max = (V²) / (4R)
where P_max is the maximum power.
Substituting the given values, we get:
P_max = (121²) / (4 x 3.53k)
P_max = 16.4 watts
Therefore, the maximum power delivered to the circuit is 16.4 watts.

Learn more about Ohm's Law here

https://brainly.com/question/1247379

#SPJ11

The air pressure in the tires of a 950-kg car is 3.1×10⁵N/m², and the average area of contact of each tire with the road is 0.03 m².

To find the average area of contact of each tire with the road, we need to use the formula:

                pressure = force/area

We know the pressure (3.1×10⁵ N/m² and the weight of the car (950 kg), which we can convert to force using the formula:

                force = mass x gravity

where gravity is approximately 9.8 m/s².

                force = 950 kg x 9.8 m/s²

                          = 9310 N

Now we can rearrange the formula for pressure and solve for area:

               area = force/pressure

               area = 9310 N / 3.1×10⁵ N/m²

               area = 0.03 m²

To express this answer in two significant figures, we round to 0.03 m².

Each tire's average area of contact with the road = 0.03 m².

Learn more about pressure here:

https://brainly.com/question/28012687

#SPJ11

Answer:

No, because the graph with the steepest slope experiences the greatest rate of change in velocity. That object has the greatest acceleration.

What does constant acceleration look like on an acceleration graph?

Constant acceleration means a horizontal line for the acceleration graph. The acceleration is the slope of the velocity graph. Constant acceleration = constant slope = straight line for the velocity graph. The area under the acceleration graph is the change in velocity.

Hope this helps :)

Pls brainliest...

If the plate area of a fully charged parallel plate capacitor is decreased, the electric field between the plates will increase.

This is because the electric field is directly proportional to the charge on the plates and inversely proportional to the distance between the plates.

As the plate area decreases, the distance between the plates also decreases, which increases the electric field. However, if the capacitor has a dielectric material inside, the electric field will decrease due to the increased capacitance of the capacitor. Therefore, the correct answer is that the electric field will increase, unless there is a dielectric material inside the capacitor, in which case it will decrease.
A parallel plate capacitor is fully charged by a 9 Volt battery before being disconnected. When the plate area is decreased, the capacitance of the capacitor decreases. However, the charge stored in the capacitor remains constant since it is disconnected from the battery.

Therefore, the electric field between the plates of the capacitor increases as the voltage across the capacitor increases due to the decreased capacitance.

The presence of a dielectric will not change this outcome.

Learn more about capacitor here:

https://brainly.com/question/17176550

#SPJ11

According to the question the train's speed is 32 m/s. Speed is a rate at which something moves or happens.

It is typically measured in terms of distance per unit of time, such as metres per second or miles per hour. It is a scalar quantity as it does not have a direction. Speed is an important concept in a wide range of scientific and everyday applications. It is used to measure the rate at which objects move, like in athletics, or the rate at which chemical reactions happen, such as in pharmacology. It is also important in the study of the movement of waves and electromagnetic radiation.

The train's speed can be calculated by dividing the distance covered (960 meters) by the time taken (30 s).

Speed = 960 meters / 30 s

Speed = 32 m/s.

To learn more about speed

https://brainly.com/question/3004254

#SPJ1

The next longest wavelength is approximately 720 nm.

The energy levels of an electron in a one-dimensional box are given by:

E_n = (n^2 * h^2)/(8mL^2)

where n is the quantum number, h is Planck's constant, m is the mass of the electron, and L is the length of the box.

The longest wavelength photon that the electron can absorb is the one that excites it from the ground state (n=1) to the first excited state (n=2), such that the energy of the photon matches the energy difference between these two levels:

E_photon = E_2 - E_1 = (4-1)h^2/(8mL^2) = 3h^2/(8mL^2)

The corresponding wavelength of this photon can be found using the equation:

λ = c/f = hc/E_photon

where c is the speed of light, f is the frequency of the photon, and λ is its wavelength.

Substituting the given values, we get:

λ_1 = hc/E_photon = hc * 8mL^2 / 3h^2 = 8mcL^2/3h

λ_1 = 540 nm = 540 * 10^-9 m

Solving for L, we get:

L = √(3hλ_1/8mc)

Substituting this value of L in the expression for E_photon, we get the energy of the next excited state (n=3):

E_photon' = E_3 - E_1 = (9-1)h^2/(8mL^2) = 8h^2/(8mL^2)

The wavelength of the photon that corresponds to this energy difference can be found as before:

λ_2 = hc/E_photon' = hc * 8mL^2 / 8h^2 = mcL^2/h

Therefore, the next longest-wavelength photon that the electron can absorb is:

λ_2 = mcL^2/h = (9.11×10^-31 kg)(√(3hλ_1/8mc))^2/h

Substituting the given values, we get:

λ_2 ≈ 720 nm

Therefore, the next longest-wavelength photon that the electron can absorb, starting from the ground state, has a wavelength of approximately 720 nm.

Learn more about Planck's constant

brainly.com/question/30763530?referrer=searchResults

#SPJ11

the volume of the body is approximately 0.1199 cubic meters.

To find the volume of the body, we can use Archimedes' principle, which states that the weight of a fluid displaced by an object is equal to the buoyant force acting on the object.

In this case, the buoyant force acting on the body in water is equal to the weight of the water displaced by the body. Since the body weighs 5 N in water, it displaces 5 N of water.

The weight of the body in the air is 6 N, which is greater than the weight of the water displaced by the body. This means that the body sinks in water and has a density greater than that of water.

We can use the formula for density, which is density = mass/volume, to find the volume of the body. We know that the mass of the body is equal to its weight divided by the acceleration due to gravity, which is approximately 9.81 m/[tex]S^{2}[/tex]. Therefore:

mass = 6 N / 9.81 [tex]m/s^{2}[/tex]= 0.611 kg

Since the density of water is 1000 [tex]kg/m^{3}[/tex], we can set up the following equation to solve for the volume of the body:

density of body * volume of body = mass of body

density of body * V = 0.611 kg

the density of body = 0.611 kg / V

The density of the body must be greater than 1000 [tex]kg/m^{3}[/tex], the density of water. We can assume that the density of the body is constant and solve for the volume:

density of body = 5 N / (V * 9.81 m/[tex]S^{2}[/tex])

Setting these two equations equal to each other, we get:

0.611 kg / V = 5 N / (V * 9.81m/[tex]S^{2}[/tex])

Solving for V, we get:

V = 0.611 kg / (5 N / 9.81 m/[tex]S^{2}[/tex])

V = 0.1199 m^3

Therefore, the volume of the body is approximately 0.1199 cubic meters.

Learn more about Archimedes' principle:

https://brainly.com/question/787619

At the cutoff frequency of either a high-pass or a low-pass RC filter, the output power is equal to half the input power.

An RC filter is a type of electronic filter that is commonly used to pass or block certain frequencies of electrical signals. It is made up of a resistor (R) and a capacitor (C) that are connected in series or in parallel to create a filter circuit. The RC filter is a simple and cost-effective way to filter high or low-frequency signals in electronic circuits.

At the cutoff frequency of a high-pass or low-pass RC filter, the output voltage is reduced to 0.707 times the input voltage. Since power is proportional to the square of the voltage, the output power is reduced to (0.707)^2 = 0.5 times the input power at the cutoff frequency. This means that half of the power from the input signal is allowed to pass through the filter at the cutoff frequency, and the other half is attenuated.

Learn more about the RC filters:

https://brainly.com/question/29490209

#SPJ11

A. The wheel's constant angular acceleration is 66.88 rad/s².
B. The angular velocity at t = 3.20 s is 326.25 rad/s.
C. The angular velocity at t = 0 is 548.01 rad/s.
D. The wheel turned through an angle of 1401.44 radians between t = 0 and t = 3.20 s.

A. To calculate the angular acceleration (α), divide the tangential acceleration (10.7 m/s²) by the radius (0.160 m): α = 10.7 / 0.160 = 66.88 rad/s².

B. To find the angular velocity (ω) at t = 3.20 s, divide the tangential speed (51.0 m/s) by the radius (0.160 m): ω = 51.0 / 0.160 = 326.25 rad/s.

C. Use the formula ω_final = ω_initial - α*t to find the angular velocity at t = 0: 326.25 = ω_initial - 66.88 * 3.20, thus ω_initial = 548.01 rad/s.

D. To find the angle turned (θ), use the formula θ = ω_initial*t + 0.5*(-α)*t²: θ = 548.01 * 3.20 + 0.5 * (-66.88) * 3.20² = 1401.44 radians.

To know more about angular acceleration click on below link:

https://brainly.com/question/29428475#

#SPJ11