A heavy brick weighs more than a fluffy cushion, but the cushion takes up more space. Which object has more matter?

Answer:

The elements present in calcium phosphate-based on molecular formula are calcium, phosphorus, and oxygen. The molecular mass of Ca or calcium is 40.08 grams per mole, the molecular mass of P or phosphorus is 30.97 grams per mole, and the molecular mass of oxygen is 16.00 grams per mole. So, in combination, the molecular mass of Ca₃(PO₄)₂ is, = (3 × 40.08 + 2 ×3 0.97 + 8 × 16) = 310.18 grams per mole

Now, the mass percent of calcium is, = n × molecular mass of calcium/ molecular mass of Ca₃(PO₄)₂ × 100% = 3 × 40.08 / 310.18 × 100 = 38.76 % Thus, the mass percent of the calcium in calcium phosphate is 38.76%.  

The mass percent of phosphorus (P), = n × molecular mass of phosphorus/molar mass of Ca₃(PO₄)₂ × 100% = 2 × 30.97/310.18 × 100 = 19.97% Thus, the mass percent of phosphorus in calcium phosphate is 19.97%.  

The mass percent of oxygen (O), = n × molecular mass of oxygen/molar mass of Ca₃(PO₄)₂ × 100% = 8 × 16/310.18 × 100% = 41.27% Thus, the mass percent of oxygen in calcium phosphate is 41.27%.

Answer:

5.0 moles of water per one mole of anhydrate

Explanation:

To solve this question we must find the moles of the anhydrate. The difference in mass between the dry and the anhydrate gives the mass of water. Thus, we can find the moles of water and the moles of water per mole of anhydrate:

Moles Anhydrate:

7.58g  * (1mol / 84.32g) = 0.0899 moles XCO3

Moles water:

15.67g - 7.58g = 8.09g * (1mol / 18.01g) = 0.449 moles H2O

Moles of water per mole of anhydrate:

0.449 moles H2O / 0.0899 moles XCO3 =

5.0 moles of water per one mole of anhydrate

The question is incomplete, the complete question is shown in the image attached to this answer

Answer:

B

Explanation:

A Lewis acid is specie that has vacant orbitals and is able to accept a lone pair of electrons while a Lewis base is any specie having a lone pair of electrons which can be donated to another chemical specie.

Hence a Lewis acid accepts a lone pair of electrons while a Lewis base donates a lone pair of electrons.

From the resonance structure shown, the carbon atom in the carbonyl compound ought to function as the Lewis acid since it is electrophilic (electron deficient).

Answer: The Carbon atom in the carbonyl will act as a lewis acid and will accept a pair of electrons

Explanation:

In the minor resonance structure for the carbonyl group, we observe a positive formal charge on the carbon atom. Because of its positive formal charge, the carbon atom will act as a Lewis acid and accept a pair of electrons to stabilize that formal charge.

Answer:

D

Explanation:

D shows a double displacment reaction

the other ones show combustion, synthesis and single displacment

Answer:

Its D  

Explanation:

Did it on edge

According to the reaction: H₂S0₄ + Ca(OH)₂ → CaSO₄+ 2H₂O, the base is Ca(OH)₂.

Base is defined as a substance which can accept protons or any chemical compound that yields hydroxide ions (OH-) in solution.

Generally, base are substances that produces hydroxide ion when dissolve in water.  

Base are substances that reacts with acid to produce salt and water. Example of base includes sodium hydroxide, potassium hydroxide, magnesium hydroxide, calcium hydroxide etc.

Therefore, according to the reaction:

H₂S0₄ + Ca(OH)₂ → CaSO₄+ 2H₂O

The base is Ca(OH)₂.

learn more on chemical reaction here: https://brainly.com/question/14575718

AAnswer:

Explanation:

Light acting as 'packets' of exact amounts of energy (a particle-like quality) called quanta led to the development of quantum mechanics. Light also has wave qualities (wavelength, frequency, amplitude) which is referred to as particle-wave duality.

Answer:

9.0mm x 2.0mm x 2.0mm

= 18mm3

Answer:

36mm^3

Explanation:

This is easy

Answer:

0.32 L

Explanation:

The equation of the reaction is;

2HBr(aq) + CaCO3(s) ----->CaBr2(aq) + H2O(l) + CO2(g)

The number of moles HBr reacted = 19.1/1000 L * 1.26 M = 0.024 moles

According to the reaction equation;

2 moles of HBr produces 1 mole of CO2

0.024 moles of HBr produces  0.024 * 1/2 = 0.012 moles of CO2

For CaCO3

Number of moles  = 23.7g/100 g/mol = 0.237 moles

Since the reaction is 1:1, 0.237 moles of CO2 is produced.

Hence HBr is the limiting reactant and 0.012 moles of CO2 is produced.

From PV =nRT

V = nRT/P

P= 713.6 torr

n= 0.012 moles

T = 29.9°C + 273 = 302.9 K

R =  62.36 L torr/mol K

V = 0.012 * 62.36 * 302.9/713.6

V = 0.32 L

Answer:

106.180

Explanation:

maybe this is the correct answer

I SAID MAYBE

Answer:

Chloroplast

Explanation:

Photosynthesis happens in chloroplast of plants. Mitochondira is where the cellular respiration happens.

Answer:

*2Kl+Pb(NO3)2=PbI2+2KNO3: double replacement.

*2Al+3CuSO4=Al2(SO4)3+3Cu: single replacement.

*C2H5OH+3O2=2CO2+3H2O: combustion.

Explanation:

Hello there!

In this case, according to the required, it turns out necessary for us to recall the five types of reactions, combination, decomposition, single and double replacement and combustion as shown on the attached figure.

In such a way, since the first reaction follows the pattern AB+CD-->AD+CB we infer it is double replacement; the second reaction follows the patter A+BC-->AC+B and therefore it is single replacement; and the last one follows the pattern of combustion reaction due to the presence of CO2 and H2O on the products side.

Regards!

Answer:

TRUE

Explanation:

plz brian list

Answer:

True

Explanation:

Point to be present exactly at midway between center and circumference of circle (let’s say radius = r) should lie at circumference of circle of radius r/2.

Favorable outcome = 2*pi*r/2

Total outcome = Point can be anywhere inside the circle of radius r = Area of circle = pi * r * r

Probability = (2*pi*r/2) / pi * r* r = 1/r.

Not completely sure about correctness . Waiting for comments to verify.

Answer:

0.16 L

Explanation:

Step 1: Write the balanced equation

C₃H₈(g) + 5 O₂(g) → 3 CO₂(g) + 4 H₂O(g)

Step 2: Calculate the moles of CO₂ produced from 0.012 moles of O₂

The molar ratio of O₂ to CO₂ is 5:3. The moles of CO₂ produced are 3/5 × 0.012 mol = 0.0072 mol.

Step 3: Calculate the volume occupied by 0.0072 moles of CO₂ at standard temperature and pressure

At STP, 1 mole of CO₂ occupies 22.4 L.

0.0072 mol × 22.4 L/1 mol = 0.16 L

Answer:

yea

Explanation:

Answer:1.Owen

2.By dropping the balls from the same height

3.She dropped the balls from different heights

4. Perform a second trial

Explanation: sub to technoblade plz

Answer:

4 moles of O2 are consumed if 8moles of H2

ladoooooooooioooooioiiioooo

Answer:

1.3 × 10² g

Explanation:

Step 1: Given data

Moles of oxygen: 4.0 mol

Step 2: Calculate the mass corresponding to 4.0 moles of oxygen

For a given chemical reaction, we need 4.0 moles of oxygen and we want to find what mass in grams it represents. To convert moles to mass, we need a conversion factor: the molar mass. The molar mass of oxygen is 32.00 g/mol.

4.0 mol × 32.00 g/mol = 1.3 × 10² g

Answer:

2 moles of NO

Explanation:

Our reaction is:

4NH₃ + 5O₂  →   6H₂O  +  4NO  

4 moles of ammonia react to 5 moles of oxygen in order to produce 6 moles of water and 4 moles of NO

We need to determine the limiting reactant:

Ratio is 4:5, As 4 moles of ammonia react to 5 moles of oxygen and we have 4 moles, we definetely need 5 moles, but the problem is, we only have 2.5 moles of O₂. Oxygen is the limting reagent.

5 moles of O₂ produce 4 moles of NO, according to stoichiometry

2.5 moles of O₂ may produce (2.5 . 4) / 5 = 2 moles of NO

Answer:

The answer is "the electron configuration of the element".

Explanation:

Electronics are distributed in atomic and molecular orbit via electrons from an atom or a molecule.

It reflects a most frequent dependence on valence electrons in the outer.

Through analyzing the context of the regular periodic table, the individual atoms are helpful. That's also important to understand chemical connections, which hold electrons together. This similar approach helps to explain the specific characteristics of lasers or semiconductors for bulk materials.

Using Phosphoric acid will work perfectly for producing Hydrogen halides because its not an Oxidizing agent. ...

Using an ionic chloride and Phosphoric acid

H3PO4 + NaCl ==> HCl + NaH2PO4

H3PO4 + NaI ==> HI + NaH2PO4

H2SO4 + NaCl ==> HCl + NaHSO4

This method(Using H2So4) will work for all hydrogen hydrogen halide except Hydrogen Iodide and Hydrogen Bromide.

The Sulphuric acid won't be useful for producing Hydrogen Iodide because its an OXIDIZING AGENT. Whist producing the Hydrogen Iodide... Some of the Iodide ions are oxidized to Iodine.

2I-² === I2 + 2e-

Answer:

0.5447

Explanation:

The atomic packing fraction factor is given by

APF = Volume of sphere/ Volume of unit cell

[tex]APF = \frac{N\times V_N}{V_C}[/tex]

The atomic radius = 0.135 nm

The Density of the metal = 3.55 g/cm^3

To calculate the number of atoms

= desnsity/(atomic radius×Avagadro's number)

Putting values and solving we get

the number of atoms = 4

Now,

[tex]APF = \frac{4\times 4/3\pi(0.135\times10^{-9})^3}{(0.545\times10^{-9})^2(0.255\times10^{-9})}[/tex]

Solving we get

APF = 0.54427

To Find :

The horizontal range of a projectile launched at 15 degrees to the horizontal with speed of 40 m/s​.

Solution :

The horizontal range of a projectile is given by :

[tex]R = \dfrac{u^2 sin 2\theta}{g}[/tex] ( Here, g is acceleration due to gravity = 10 m/s² )

Putting all value in above equation :

[tex]R = \dfrac{40^2 \times sin (2 \times 15)}{10} \ m\\\\R = \dfrac{1600 \times 1}{2\times 10} \ m\\\\R = 80 \ m[/tex]

Therefore, the horizontal range of projectile is 80 m.

Answer:

True

Explanation:

An alcohol is an organic molecule containing an -O-H group. Any molecule which has a hydrogen atom attached directly to an oxygen or a nitrogen is capable of hydrogen bonding.

Explanation:

LCCEB is the answer

Answer:

si

Explanation:

Los catalizadores son sustancias que aceleran una reacción química, proporcionando una ruta alternativa para romper y formar nuevos enlaces entre átomos. Su importancia reside en el hecho de que este nuevo camino requiere menos energía que el original, lo que facilita el proceso.

Answer:

Schottky defect

Explanation:

Schottky defect in crystals units alters the density of a solid.