A gas mixture contains 75.2% nitrogen and 24.8% krypton by mass. what is the partial pressure of krypton in the mixture if the total pressure is 857 mmhg ? express your answer with the appropriate units.

Scandium (Sc) has the highest first ionization energy among the given atoms.

To determine this, we should understand that ionization energy is the energy required to remove an electron from an atom. Generally, ionization energy increases across a period (from left to right) and decreases down a group (from top to bottom) in the periodic table. The reason is that as we move across a period, the nuclear charge increases, holding the electrons more tightly, and as we move down a group, the electrons are farther away from the nucleus, making them easier to remove.

Sc has the highest ionization energy because of the poor shielding of the d-orbital, which causes the Zeff of Sc to increase. Hence, increasing the ionization energy.

To learn more about ionization energy, visit: https://brainly.com/question/28385102

#SPJ11

Scandium (Sc) has the highest first ionization energy among the given atoms.

To determine this, we should understand that ionization energy is the energy required to remove an electron from an atom. Generally, ionization energy increases across a period (from left to right) and decreases down a group (from top to bottom) in the periodic table. The reason is that as we move across a period, the nuclear charge increases, holding the electrons more tightly, and as we move down a group, the electrons are farther away from the nucleus, making them easier to remove.

Sc has the highest ionization energy because of the poor shielding of the d-orbital, which causes the Zeff of Sc to increase. Hence, increasing the ionization energy.

To learn more about ionization energy, visit: https://brainly.com/question/28385102

#SPJ11

The role of the modification seen on Fucose could be to fine-tune its chemical properties and interactions with other molecules, particularly proteins, through the addition or removal of functional groups. This would, in turn, influence the function of the glycoproteins and glycolipids containing the modified Fucose.

Fucose is a monosaccharide, specifically a deoxyhexose sugar, which is often found as a component of glycoproteins and glycolipids in eukaryotes. It can be modified through the addition or removal of functional groups, such as sulfation or acetylation, which can alter its properties and interactions with other molecules.

A possible role of the modification seen on Fucose could be to modulate its interactions with proteins, such as lectins or enzymes, that recognize and bind to Fucose-containing structures. By altering the chemical properties of Fucose, the modification may enhance or weaken the binding affinity between Fucose and its binding partners.

For instance, the addition of a sulfate group to Fucose (creating sulfated Fucose) could increase its overall negative charge, potentially improving its interaction with positively charged protein domains. Conversely, acetylation of Fucose, which adds an acetyl group, might reduce the overall negative charge, leading to weaker binding or altered selectivity.

Know more about Fucose - brainly.com/question/5306921

#SPJ11

Digoxin is used in systolic heart failure because it helps to increase the strength and efficiency of the heart's contractions, particularly in cases where the systolic function of the heart is impaired.

Digoxin works by inhibiting the sodium-potassium ATPase pump, which leads to an increase in intracellular calcium concentrations and subsequently improves the contractility of the heart. This makes it an effective treatment option for patients with systolic heart failure, as it can help to improve cardiac output and reduce symptoms such as shortness of breath and fatigue.

However, due to its narrow therapeutic index, careful monitoring is necessary to ensure that digoxin levels remain within a safe and effective range.

Learn more about Digoxin here:

https://brainly.com/question/12978309

#SPJ11

Answer:

31.5 L

Explanation:

Simply use PV=nRT

Convert kPa  to atm by using 101.3 kPa = 1 atm

78.5 kPa x (1 atm/101.3 kPa) = .775 atm

Then find moles of O2 where MM = 32 so we have 1.0 moles

Find T in Kelvin = C +273 = 25 + 273 = 298

(.775 atm)(V) = 1.0 moles(0.082 atm x L / mol x K)(298 K)

V = 31.5 L

Answer:

The Holocaust was a tragic event that took place during World War II. Many people were persecuted and killed because of their race, religion, or ethnicity. Despite the atrocities that took place, there were survivors who managed to escape and rebuild their lives.

One of the most important characters in the story of the Holocaust survivors is Anne Frank, who kept a diary of her experiences while in hiding from the Nazis. Other important characters include Oskar Schindler, a German businessman who saved the lives of many Jews by employing them in his factory, and Raoul Wallenberg, a Swedish diplomat who saved thousands of Hungarian Jews from deportation to concentration camps.

The story of the survivors is filled with conflict and resolution. Many faced immense danger and struggled to stay alive, while others risked their own lives to help them. The end of the war brought a resolution to the conflict, but the survivors still faced many challenges as they tried to rebuild their lives.

Overall, the story of the survivors in the Holocaust is a testament to the human spirit and the ability to persevere in the face of unimaginable hardship.

Explanation:

Answer: Potassium (K) has the lowest electronegativity among the given elements.

Explanation:

Electronegativity is a measure of an element's ability to attract electrons towards itself when it is involved in a chemical bond with another element. Potassium has the lowest electronegativity because it has only one valence electron that is located far from the nucleus, making it easier to lose that electron and become a positively charged ion. In contrast, nitrogen, lithium, and bromine have higher electronegativities because they have more valence electrons or the valence electrons are closer to the nucleus, making it more difficult to remove or share electrons.

The element with the lowest electronegativity among the given options is potassium (K). Potassium has an electronegativity value of approximately 0.82 on the Pauling scale, which is the lowest value among the four elements listed. In contrast, nitrogen (N) has an electronegativity of approximately 3.04, bromine (Br) has an electronegativity of approximately 2.96, and lithium (Li) has an electronegativity of approximately 0.98. Electronegativity is a measure of an atom's ability to attract electrons towards itself in a chemical bond. The lower the electronegativity value, the less the atom attracts electrons towards itself.

Brainliest?

In this case, we have 2 moles of Na and 3 moles of H2O, which means that H2O is the limiting reagent. Na is in excess, because we have more than enough to react with all of the H2O.

a. The balanced chemical equation for the reaction is:
2Na(s) + 6H2O(l) → 2NaOH(aq) + 3H2(g)

b. The molecular representations of the reaction can be shown as follows:

After reaction:
2Na + 3H2O → 2NaOH + 3H2

Before reaction:
Na + Na + 3H2O → NaOH + NaOH + 3H2

c. To determine which reagent is limiting, we need to calculate the amount of product that can be formed from each reactant. The balanced equation tells us that 2 moles of Na react with 6 moles of H2O to produce 2 moles of NaOH and 3 moles of H2. Therefore, if we have 2 moles of Na and 6 moles of H2O, we can produce 2 moles of NaOH and 3 moles of H2.

However, if we have less than 6 moles of H2O, then H2O is the limiting reagent, because we will run out of it before all of the Na is used up. If we have less than 2 moles of Na, then Na is the limiting reagent, because we will run out of it before all of the H2O is used up.

To know more about limiting reagent refer to

https://brainly.com/question/26905271

#SPJ11

The change in enthalpy associated with the combustion of 23.00 g of methanol is approximately -521.2 kJ.

To calculate the change in enthalpy associated with the combustion of 23.00 g of methanol, we need to use the stoichiometry and the given enthalpy change per mole (ΔΗ_c = -726 kJ/mol).

First, determine the number of moles of methanol (CH₃OH) by dividing the mass (23.00 g) by its molar mass (32.04 g/mol):

23.00 g / 32.04 g/mol ≈ 0.7178 mol

Now, multiply the moles of methanol by the given enthalpy change per mole:

0.7178 mol * -726 kJ/mol ≈ -521.2 kJ

So, the change in enthalpy associated with the combustion of 23.00 g of methanol is approximately -521.2 kJ (to four significant figures).

Learn more about change in enthalpy here: https://brainly.com/question/11628413

#SPJ11

To calculate the Ksp value for silver sulfide (Ag2S) using its solubility, follow these steps:

1. Convert solubility to molar solubility:
Solubility = 7.37 × 10^-15 g/L
Molar mass of Ag2S = (2 × 107.87 g/mol Ag) + 32.07 g/mol S = 247.81 g/mol
Molar solubility = (7.37 × 10^-15 g/L) / (247.81 g/mol) = 2.97 × 10^-17 mol/L

2. Write the dissolution equilibrium reaction:
Ag2S (s) ⇌ 2Ag+ (aq) + S2- (aq)

3. Set up the Ksp expression:
Ksp = [Ag+]^2 × [S2-]

4. Find the molar concentrations of Ag+ and S2-:
Since 1 mol of Ag2S produces 2 mol of Ag+, the concentration of Ag+ is 2 × 2.97 × 10^-17 mol/L = 5.94 × 10^-17 mol/L.
The concentration of S2- is equal to the molar solubility, 2.97 × 10^-17 mol/L.

5. Plug the concentrations into the Ksp expression and solve:
Ksp = (5.94 × 10^-17)^2 × (2.97 × 10^-17) = 1.05 × 10^-50

So, the Ksp value for silver sulfide (Ag2S) is approximately 1.05 × 10^-50.

Learn more about Ksp expression here:

https://brainly.com/question/27132799

#SPJ11

The Kb of the acid is approximately 1.28 x 10^-12.

When determining the Kb of an acid with a given Ka value of 7.8 x 10^-3, the ion product of water (Kw) can be utilized.

At a temperature of 25°C, Kw is known to be 1 x 10^-14. The relationship between Ka, Kb, and Kw is given by the equation:

Kw = Ka * Kb.

By rearranging this equation, we can find the value of Kb, which is the desired quantity.

Substituting the given values into the rearranged equation, we obtain

Kb = (1 x 10^-14) / (7.8 x 10^-3),

which simplifies to

Kb ≈ 1.28 x 10^-12

This result indicates that the Kb of the acid is approximately 1.28 x 10^-12.

This calculation is useful in determining the basicity of the acid and its reactivity in basic solutions. Additionally, the relationship between Ka, Kb, and Kw is an important concept in acid-base chemistry, and it is essential for understanding the behavior of acids and bases in various chemical reactions. Overall, this calculation is a simple yet essential example of how to determine the Kb of an acid using known values of Ka and Kw.

Know more about relationship between Ka, Kb, and Kw here:

https://brainly.com/question/15400042

#SPJ11

According to the American Chemistry Society, cloth-topped "tennis" or "running" shoes are recommended for general laboratory work. Sandals, woven leather shoes, and high heels are not recommended as they do not provide adequate protection for the feet  against spills or dropped objects in a laboratory setting.
The American Chemical Society is a scientific society based in the United States that supports scientific research in the field of chemistry.

Other safety precautions include: Wearing appropriate gloves, masks, lab coat and shoes. Being careful while using pipette. Washing the glassware properly before using etc.

For more questions regarding American Chemical Society: https://brainly.com/question/28492543

#SPJ11

The percent yield for this experiment is approximately 75%. The percent yield is the actual yield of a reaction divided by the theoretical yield, multiplied by 100. In this case, we need to first find the theoretical yield of NH3 that should have been produced based on the amount of N2 and H2 that were reacted.

The balanced chemical equation for the reaction is:
N2 + 3H2 → 2NH3
From the given information, you have reacted 0.5 mol N₂ with 0.5 mol H₂. To find the limiting reactant, compare the mole ratios:
For N₂: 0.5 mol N₂ × (2 mol NH₃ / 1 mol N₂) = 1 mol NH₃ (theoretical yield)
For H₂: 0.5 mol H₂ × (2 mol NH₃ / 3 mol H₂) ≈ 0.333 mol NH₃ (theoretical yield)
Since the theoretical yield for H₂ is smaller, H₂ is the limiting reactant. The maximum amount of NH₃ that can be formed is 0.333 mol. The actual yield is given as 0.25 mol NH₃. Now, calculate the percent yield:
Percent Yield = (Actual Yield / Theoretical Yield) × 100
Percent Yield = (0.25 mol / 0.333 mol) × 100 ≈ 75%

To know more about reaction visit :-

https://brainly.com/question/28984750

#SPJ11

The combining of the fragments which remain after the loss of -OH from the alcohol and H from the carboxylic acid represents the overall transformation when a carboxylic acid is converted to an ester. This process is called esterification. Therefor the option B is correct.

The combination of the parts left over after the loss of -OH from the alcohol and H from the carboxylic acid represents the complete transformation when a carboxylic acid is transformed into an ester.

Esterification is a typical reaction in organic chemistry that describes this process. A carboxylic acid and an alcohol react with the help of an acid catalyst to produce an ester and water during esterification.

The creation of a new C-O bond between the oxygen of the alcohol and the carbonyl carbon of the carboxylic acid drives the reaction. The -OH group of the carboxylic acid and the -H group of the alcohol are removed and the remaining pieces are joined to create the ester.

The production of many different chemicals, including plasticizers, perfumes and flavors, depends on this interaction. In general, esterification is a fundamental organic chemical reaction with several industrial and commercial uses.

To know more about esterification,

https://brainly.com/question/28118164

In the [tex]C_{13}[/tex] NMR of phenylethylamine, we would expect to see four peaks.

This is because phenylethylamine contains four unique carbon environments: the carbon attached to the amino group, the carbon alpha to the amino group, the two carbons in the phenyl ring, and the carbon beta to the phenyl ring.

Each of these carbon environments will give rise to a distinct peak in the C13 NMR spectrum.

To know more about phenylethylamine, refer here:

https://brainly.com/question/29517032#

#SPJ11

In the [tex]C_{13}[/tex] NMR of phenylethylamine, we would expect to see four peaks.

This is because phenylethylamine contains four unique carbon environments: the carbon attached to the amino group, the carbon alpha to the amino group, the two carbons in the phenyl ring, and the carbon beta to the phenyl ring.

Each of these carbon environments will give rise to a distinct peak in the C13 NMR spectrum.

To know more about phenylethylamine, refer here:

https://brainly.com/question/29517032#

#SPJ11

Amount of heat involved is: 311KJ

To calculate the heat involved in this reaction, we can use the following equation:

ΔH = n × ΔH°

where ΔH is the heat involved in the reaction, n is the number of moles of N₂ reacted, and ΔH° is the standard enthalpy change for the reaction.

First, we need to calculate the number of moles of N₂ reacted. We can do this by dividing the mass of N₂ by its molar mass:

n(N₂) = m(N₂) / M(N₂) = 68.0 g / 28.014 g/mol = 2.427 mol N₂

Given equation:

2N₂(g)+ 5O₂(g) + 2H₂O(l) → 4HNO₃(aq)

so, 2mols of N₂ produces -256kj heat

2.427 moles N₂ produces = 256*2.427/2 = -311KJ heat

To know more about heat here:

https://brainly.com/question/30603212#

#SPJ11

When hydrogen chloride gas is added to water, the products are hydronium ions and chloride ions and as the hydrogen ion is an acceptor, water is described as a Bronsted-Lowry base.

Generally according to concept of Bronsted-Lowry theory," acid is defined as a substance which donates an H⁺ ion or a proton and forms its conjugate base and the base is defined as a substance which accepts an H⁺ ion or a proton and forms its conjugate acid".

And now we can see that a hydrogen ion usually gets transferred from the HCl molecule to the H₂O molecule to give chloride ions and hydronium ions. And it is also clear that the hydrogen ion donor, HCl acts as a Bronsted-Lowry acid and also as a hydrogen ion acceptor, H₂O is a Bronsted-Lowry base.

Learn more about Bronsted Lowry acids and bases from the link given below.

https://brainly.com/question/14407412

#SPJ1

Diethylamine is a primary aliphatic amine, purine is not categorized as any of the amine classifications.

Diethylamin: This is a compound with two ethyl groups attached to a primary amine (-NH2) functional group.

purine: Purine is a heterocyclic aromatic compound that contains two nitrogen atoms in its ring structure. However, it is not classified as an amine because it does not have an -NH2 or -NR2 functional group.

Diethylamine (C4H11N) is a colorless liquid with a fishy odor. It is a common organic compound and is used as a precursor to a variety of chemicals, including pharmaceuticals, insecticides, and rubber chemicals. Diethylamine is a strong base and forms salts with acids. It is also flammable and can react violently with oxidizing agents.

Purine is a heterocyclic aromatic compound with the chemical formula C5H4N4. It is a building block of DNA and RNA, and is found in many foods, including meat, fish, and beans.

Purine is also used in the synthesis of pharmaceuticals, including drugs used to treat gout and leukemia. Its structure consists of a fused pyrimidine and imidazole ring, and its aromaticity arises from the delocalization of π-electrons over the two rings.

learn more about Organic compounds here:

https://brainly.com/question/5994723

#SPJ11

The mass of Cr₃⁺ ion in the original solution is 14.2 g and the mass of Mg²⁺ ion in the original solution is 10.8 g.

To calculate the mass of Cr₃⁺ and Mg²⁺ ions in the original solution, we can use the given information about the addition of NaF solution and the mass of precipitate formed.

The first step is to calculate the moles of NaF added to the solution. We can use the formula:

moles = concentration × volume

Substituting the values, we get:

moles of NaF added = 1.55 mol/L × 1.00 L = 1.55 moles

Since NaF reacts with both Cr₃⁺ and Mg²⁺ ions, we need to find the limiting reagent between the two ions to determine the maximum amount of precipitate that can form. The balanced chemical equations for the precipitation reactions are:

2 Cr³⁺(aq) + 3 F⁻(aq) → CrF₃(s)

Mg²⁺(aq) + 2 F⁻(aq) → MgF₂(s)

From these equations, we can see that the stoichiometric ratio of Cr³⁺:F⁻ is 2:3, while that of Mg²⁺:F⁻ is 1:2. Therefore, the limiting reagent will be the one that forms the least amount of precipitate.

To calculate the mass of precipitate formed, we can use the formula:

mass = moles × molar mass

The molar mass of CrF₃ is 157.99 g/mol, while that of MgF₂ is 62.30 g/mol. The mass of the precipitate is given as 50 g, so we can calculate the moles of precipitate formed for each ion:

moles of CrF₃ = 50 g / 157.99 g/mol ≈ 0.316 moles

moles of MgF₂ = 50 g / 62.30 g/mol ≈ 0.803 moles

Since Cr³⁺ forms two moles of precipitate for every three moles of NaF, the moles of Cr³⁺ can be calculated as:

moles of Cr³⁺ = (2/3) × moles of NaF added = (2/3) × 1.55 moles ≈ 1.03 moles

Similarly, the moles of Mg²⁺ can be calculated as:

moles of Mg²⁺ = 1/2 × moles of NaF added = 1/2 × 1.55 moles ≈ 0.775 moles

Now, we can use the moles of Cr³⁺ and Mg²⁺ to calculate their respective masses in the original solution:

mass of Cr³⁺ = moles of Cr³⁺ × molar mass of Cr³⁺ = 1.03 moles × 106.16 g/mol ≈ 14.2 g

mass of Mg²⁺ = moles of Mg²⁺ × molar mass of Mg²⁺ = 0.775 moles × 24.31 g/mol ≈ 10.8 g

To know more about original solution, refer here:
https://brainly.com/question/27778951#
#SPJ11

There are 2.04 × 10⁻⁴ moles of hydrogen in 3.06 × 10⁻³ g of glycine.

To determine the quantity of moles of hydrogen in 3.06 × 10⁻³ g of glycine, we first need to find the molar mass of glycine, which is the sum of the atomic masses of all the atoms in one molecule of glycine. The molecular formula for glycine is C₂H₅NO₂, so the molar mass of glycine is:

Molar mass of glycine = 2 × molar mass of carbon + 5 × molar mass of hydrogen + molar mass of nitrogen + 2 × molar mass of oxygen

= 2(12.01 g/mol) + 5(1.01 g/mol) + 14.01 g/mol + 2(16.00 g/mol)

= 75.07 g/mol

Next, we need to determine the number of moles of glycine in 3.06 × 10⁻³ g of glycine by dividing the mass of glycine by its molar mass:

moles of glycine = mass of glycine / molar mass of glycine

= 3.06 × 10⁻³ g / 75.07 g/mol

= 4.08 × 10⁻⁵ mol

Since the molecular formula for glycine contains five hydrogen atoms, the quantity of moles of hydrogen in 3.06 × 10⁻³ g of glycine can be found by multiplying the number of moles of glycine by the number of hydrogen atoms per molecule of glycine:

moles of hydrogen = moles of glycine × 5

= 4.08 × 10⁻⁵ mol × 5

= 2.04 × 10⁻⁴ mol

Therefore, there are 2.04 × 10⁻⁴ moles of hydrogen in 3.06 × 10⁻³ g of glycine.

To know more about molar mass, refer here:

https://brainly.com/question/30640134#

#SPJ11

The initial rate at [A] = 0.850 M is approximately 0.321 M/s. The correct answer is (a) 0.321 M/s.

Here, the initial rate of the reaction is 0.0100 M/s when the initial concentration of A is 0.150 M, we need to determine the initial rate at an initial concentration of 0.850 M.
For a second-order reaction, the rate law can be written as: rate = k[A]^2
where k is the rate constant and [A] is the concentration of A.
First, we need to find the value of k using the given initial rate and initial concentration: 0.0100 M/s = k(0.150 M)^2
Now, we can solve for k: k = (0.0100 M/s) / (0.150 M)^2
k ≈ 0.4444 M⁻¹s⁻¹
Next, we can use the value of k and the new initial concentration [A] = 0.850 M to find the new initial rate:
rate = k[A]^2rate = (0.4444 M⁻¹s⁻¹)(0.850 M)^2
Calculating the rate, we get:
rate ≈ 0.321 M/s
So, the initial rate at [A] = 0.850 M is approximately 0.321 M/s. The correct answer is (a) 0.321 M/s.

Learn more about second order reaction here, https://brainly.com/question/17586293

#SPJ11

The correct answer to the question of which type of molecule contains -[tex]NH_{2}[/tex](amino) groups is B. Protein.

Proteins are made up of long chains of amino acids, which are the building blocks of protein molecules. Amino acids are characterized by their -[tex]NH_{2}[/tex] (amino) group, which is what makes them unique from other types of molecules like carbohydrates, lipids, and nucleic acids. Carbohydrates, on the other hand, are made up of simple sugars like glucose, fructose, and galactose. They do not contain amino groups in their molecular structure. Lipids are fats, oils, and waxes that are made up of fatty acids and glycerol. They also do not contain amino groups in their molecular structure. Nucleic acids like DNA and RNA are composed of nucleotides, which do not contain amino groups. Therefore, it can be concluded that proteins are the only type of molecule that contains -[tex]NH_{2}[/tex] (amino) groups. These groups play an important role in the structure and function of proteins, as they help to form the peptide bonds that link amino acids together in a protein chain.

Learn more about protein here: https://brainly.com/question/13129

#SPJ11

The correct answer is "physical change because even though gas formation was observed, the water was undergoing a state change, which means that its original properties are preserved".

When water boils, it undergoes a physical change from a liquid state to a gas state, but the water molecules remain the same and its chemical properties do not change. The boiling of water is a result of an increase in temperature and does not involve a chemical reaction.

Learn about physical change here https://brainly.com/question/14444325

#SPJ1

The molarity of the solution containing 16.4 g of KCl in 254 ml of solution is 0.866 M. Molarity is defined as the number of moles of solute per liter of solution.

Number of moles = Mass / Molar mass
Number of moles = 16.4 g / 74.55 g/mol = 0.22 mol

Volume = 254 ml / 1000 ml/L = 0.254 L

Molarity = Number of moles / Volume

Molarity = 0.22 mol / 0.254 L = 0.866 M

Learn more about molarity: https://brainly.com/question/30404105

#SPJ11

The solubility of [tex]Au(OH)_{3}[/tex] in water and 1.0 M nitric acid can be calculated using the solubility product constant (Ksp) expression: the solubility of [tex]Au(OH)_{3}[/tex]  in 1.0 M nitric acid solution is 5.5 x [tex]10^{-18}[/tex] M.

Ksp = [tex][Au_{3} ^{+} ][OH^{-} ]^3[/tex]

where [[tex][Au_{3} ^{+} ][/tex]] is the concentration of the [tex][Au_{3} ^{+} ][/tex] ions and [tex][OH^{-} ]^3[/tex] is the concentration of hydroxide ions.

(a) Solubility of [tex]Au(OH)_{3}[/tex] in water:

Ksp = [tex][Au_{3} ^{+} ][OH^{-} ]^3[/tex]

Ksp = x * [tex](x)^3[/tex] = [tex]x^4[/tex]

x = [tex](Ksp)^(1/4)[/tex] = [tex](5.510^{-46} )^(1/4)[/tex] = [tex]1.110^{-12}[/tex] M

Solubility of [tex]Au(OH)_{3}[/tex] in water is [tex]1.110^{-12}[/tex] M.

(b) Solubility of [tex]Au(OH)_{3}[/tex] in 1.0 M nitric acid solution:

[[tex][Au_{3} ^{+} ][/tex]] = [tex](Ksp / [OH^{-} ]^3)^1/4[/tex]

[[tex]OH^{-}[/tex]] = 1.0 x [tex]10^{-14}[/tex] M (from Kw expression)

[[tex][Au_{3} ^{+} ][/tex]] = (5.5 x [tex]10^{-46}[/tex] / [tex](1.0 x 10^{-14} M)^3)^1/4[/tex]

[[tex][Au_{3} ^{+} ][/tex]] = [tex]5.5 x 10^{-18} M[/tex]

Therefore, the solubility of [tex]Au(OH)_{3}[/tex]  in 1.0 M nitric acid solution is 5.5 x [tex]10^{-18}[/tex] M.

Learn more about nitric acid

https://brainly.com/question/29769012

#SPJ4

Answer:

12.09528g [tex]H_{2}[/tex]

68.12208g [tex]NH_{3}[/tex]

Explanation:

[tex]n = \frac{V}{V_{m} } \\ = \frac{134.4}{22.4} \\ = 6 mol H_{2}[/tex]

[tex]n=\frac{m}{M} \\m= nM\\=(6)(2.051588)\\=12.09528g H_{2}[/tex]

[tex]N_{2} : NH_{3} \\ 1 : 2\\2:x\\x= 4mol NH_{3} \\\\n = \frac{m}{M} \\m=nM\\=(4)(17.03052)\\=68.12208g NH_{3}[/tex]

The solubility product constant (Ksp) for a sparingly soluble salt like barium fluoride ([tex]BaF_{2}[/tex]) can be calculated using the molar solubility of the salt. In this case, the molar solubility of [tex]BaF_{2}[/tex]  is 7.53 mmol/L. the value of Ksp for barium fluoride is 4.3x[tex]10^{-7} .[/tex]

The balanced equation for the dissolution of [tex]BaF_{2}[/tex] is:

[tex]BaF_{2}[/tex] (s) ⇌ [tex]Ba_{2}[/tex]+(aq) + [tex]2F^{-}[/tex](aq)

The Ksp expression is:

Ksp = [tex][Ba_{2}^{+} ][F^{-} ]^2[/tex]

Substituting the molar solubility of [tex]BaF_{2}[/tex] in the expression, we get:

Ksp = [tex](7.53[/tex]x[tex]10^_{-3} )^3[/tex] = 4.3x[tex]10^{-7}[/tex]

Therefore, the value of Ksp for barium fluoride is 4.3x[tex]10^{-7} .[/tex]

Learn more about molar solubility

https://brainly.com/question/14784441

#SPJ4

The value of ΔG for the reaction at 25°C is (b) -1784 kJ/mole.

To find the value of ΔG, we can use the equation:

ΔG = ΔH - TΔS

where ΔG is the change in Gibbs free energy, ΔH is the change in enthalpy, T is the temperature in Kelvin, and ΔS is the change in entropy.

Plugging in the values given:

ΔH = -1854 kJ/mol
ΔS = -236 J/(K mol) = -0.236 kJ/(K mol)
T = 25°C + 273 = 298 K

ΔG = -1854 kJ/mol - 298 K * (-0.236 kJ/(K mol))
ΔG = -1854 kJ/mol + 70.328 kJ/mol
ΔG = -1783.672 kJ/mol

Therefore, the answer is b) -1784 kJ/mole.

Learn more about Gibbs free energy here: https://brainly.com/question/13765848

#SPJ11

Answer:

I may be incorrect but C? Isnt it positron

Explanation:

The expected products of the solvolysis process are methanol (MeOH) and bromide ion (Br-) being the leaving group. Therefore, the products should be methoxide ion (OCH3) and a molecule of HBr. The reaction can be represented as follows:

Br- + MeOH (heat) → OCH3- + HBr

So, the expected product(s) are OCH3- and HBr.
The expected product(s) for this reaction include:

1. OCH3-substituted compound: The bromine atom is replaced by a methoxy group (OCH3) due to nucleophilic substitution by methanol.
2. OH-substituted compound: The bromine atom is replaced by a hydroxyl group (OH) if a small amount of water is present, which is also a common nucleophile.

Solvolysis refers to a type of chemical reaction where a molecule is cleaved or transformed in the presence of a solvent. The solvent can be water or any other polar or nonpolar substance that has the ability to dissolve the reactant. In a solvolysis reaction, the solvent acts as a nucleophile and can replace or modify certain chemical groups in the molecule, resulting in a new product. Solvolysis is a common reaction in organic chemistry and is often used to synthesize new compounds or to break down complex molecules into simpler ones. Examples of solvolysis reactions include hydrolysis, alcoholysis, and ammonolysis.

Visit here to learn more about solvolysis brainly.com/question/29448847

#SPJ11

The mass of the Pa-234 isotope that remains after 40.1 hours is 0.003 mg.

To solve this problem, we need to use the formula for radioactive decay:

N = N0(1/2)^(t/T)

Where N is the remaining amount of the isotope, N0 is the initial amount, t is the time that has elapsed, T is the half-life of the isotope.

First, we need to find the initial amount of Pa-234. Since the sample is of Pa-239, we need to assume that it decays into Pa-234. The atomic mass of Pa-239 is 239, and it decays into U-235 with a half-life of 23.5 minutes. U-235 decays into Pa-231, which then decays into Pa-234. The decay chain looks like this:

Pa-239 --> U-235 --> Pa-231 --> Pa-234

So, the initial amount of Pa-234 can be calculated from the initial amount of Pa-239 using the decay chain:

N0(Pa-234) = N0(Pa-239) x (1/2)^(40.1/6.69)

N0(Pa-239) = 0.812 mg

N0(Pa-234) = N0(Pa-239) x (1/2)^(40.1/6.69) = 0.812 mg x 0.0243 = 0.0197 mg

Now, we can use the formula for radioactive decay to find the remaining amount of Pa-234 after 40.1 hours:

N(Pa-234) = N0(Pa-234) x (1/2)^(40.1/6.69)

N(Pa-234) = 0.0197 mg x (1/2)^(40.1/6.69) = 0.003 mg

Therefore, the mass of the Pa-234 isotope that remains after 40.1 hours is 0.003 mg.

Know more about Half-life of a reaction here:

https://brainly.com/question/13052575

#SPJ11