A fjord is _____ .

a high mountain
a steep-sided glacial valley
an oceanic mountain range
a glacial plain

Answers

Answer 1

Answer:

a steep-sided glacial valley

Explanation:

A fjord is a long, narrow inlet with steep sides or cliffs, created by a glacier. It is a long, deep, narrow body of water that reaches far inland. Fjords are found mainly in Norway, Chile, New Zealand, Canada, Greenland, and Alaska. They are formed when a glacier cuts a U-shaped valley by ice segregation and abrasion of the surrounding bedrock. According to the standard model, glaciers formed in pre-glacial valleys with a gently sloping valley floor. The work of the glacier then left an over deepened U-shaped valley that ends abruptly at a valley or trough end. Such valleys are fjords when flooded by the ocean. Thresholds above sea level create freshwater lakes.


Related Questions

Consider a sample containing 0.300 mol of a substance. How many atoms are in the sample if the substance is iron?

Answers

The number of atoms in a sample containing 0.300 mol of iron is 1.8066 x 10²³ atoms.

The number of atoms in a sample of a substance can be determined using Avogadro's number, which is equal to 6.022 x 10²³ particles per mole. The atomic mass of iron is 55.85 g/mol.

Therefore, 0.300 mol of iron will contain:

0.300 mol x 6.022 x 10³ atoms/mol = 1.8066 x 10²³ atoms

Avogadro's number is a fundamental constant in chemistry that represents the number of particles (atoms or molecules) in one mole of a substance.

To learn more about atoms follow the link:

https://brainly.com/question/29695801

#SPJ1

when 56.6 g of calcium and 30.5g of nitrogen gas under go a reaction that has 90% yield, what mass of calcium nitride is formed?​

Answers

Answer:

152.57 g

Explanation:

The balanced chemical equation for the reaction between calcium and nitrogen gas to form calcium nitride is:

3Ca + N2 → Ca3N2

From the balanced equation, we can see that the mole ratio between calcium and calcium nitride is 3:1. This means that 3 moles of calcium react to form 1 mole of calcium nitride.

First, let's calculate the number of moles of calcium and nitrogen gas given:

Mass of calcium = 56.6 g

Molar mass of calcium (Ca) = 40.08 g/mol

Moles of calcium = Mass of calcium / Molar mass of calcium = 56.6 g / 40.08 g/mol = 1.41 mol

Mass of nitrogen gas = 30.5 g

Molar mass of nitrogen gas (N2) = 28.02 g/mol

Moles of nitrogen gas = Mass of nitrogen gas / Molar mass of nitrogen gas = 30.5 g / 28.02 g/mol = 1.09 mol

Since the reaction has a 90% yield, only 90% of the limiting reactant (which is calcium in this case) will be converted to product. Therefore, we need to multiply the moles of calcium by 0.90 to account for the yield:

Moles of calcium nitride formed = Moles of calcium x Yield = 1.41 mol x 0.90 = 1.27 mol

Now, using the mole ratio from the balanced equation, we can determine the mass of calcium nitride formed:

Molar mass of calcium nitride (Ca3N2) = 40.08 g/mol (molar mass of calcium) x 3 + 14.01 g/mol (molar mass of nitrogen) x 2 = 120.25 g/mol

Mass of calcium nitride formed = Moles of calcium nitride formed x Molar mass of calcium nitride = 1.27 mol x 120.25 g/mol = 152.57 g

So, the mass of calcium nitride formed in the reaction is 152.57 g.


What quantity of heat (in J) would be required to convert 0.27 mol of a pure substance from a liquid at 50 °C to a gas at 113.0 °C?.
Cliquid = 1.45 J/mol C
Cgas = 0.65 J/mol *C
Tboiling = 88.5 °C
AHvaporization = 1.23 kJ/mol
Give your answer in Joules

Answers

Explanation:

First you have to heat the liquid from 50 to 88.5 C  to get it boiling...

  then you need to boil it all to a gas....the you have to heat it to 113 C

.27 mole  *

     (  (88.5 -50 C)*1.45 J / (mole-C)      <====heating the liquid

               +  1230 J / mole                              <====boiling to a gas

                       + (113 - 88.5 C) * .65 J/(mole C)    <=====heating the gas

                                = 351 .5 J                              <=====result

Sucrose (C12H22011) is combusted in air according to the following reaction:
C12H22011(s) + O2(g) = CO2(g) + H2O(l )
How many moles of carbon dioxide would be produced by the complete combustion of 38.5 grams of sucrose in the presence of excess oxygen?

Answers

Okay, let's break this down step-by-step:

1) The molecular formula for sucrose is C12H22011. This means each mole of sucrose contains 12 moles of carbon and 22 moles of hydrogen.

2) You are combusting 38.5 grams of sucrose. To convert grams to moles, we divide by the molar mass:

Molar mass of C12H22011 = 342.3 g/mol

So 38.5 g / 342.3 g/mol = 0.113 moles of sucrose

3) According to the combustion reaction, each mole of sucrose produces 12 moles of CO2.

So 0.113 moles of sucrose will produce 0.113 * 12 = 1.356 moles of CO2.

4) Round to the nearest whole number:

1 mole of CO2

Therefore, the complete combustion of 38.5 grams of sucrose in excess oxygen would produce 1 mole of carbon dioxide.

Let me know if you have any other questions!

Calculate the mass of water produced when 1.03 g
of butane reacts with excess oxygen.

Answers

1.03 g of butane will yield 1.59 g of water when it reacts with too much oxygen.

What is mass?

The amount of matter in an item is measured by the fundamental physical quantity known as mass. It is a scalar quantity that is measured in grams (g) or kilograms (kg) (g). No matter where it is or what force is pushing against it, an object's mass always remains constant.

How do you determine it?

For butane and oxygen to burn, the chemical equation is balanced as follows:

2C4H10+13 O2→ 8 CO2+ 10 H2O

According to the equation, 1 mole of butane (C4H10) and 13/2 moles of oxygen (O2) combine to form 5 moles of water (H2O).

To begin with, we must count the butane moles that are present:

Mass of butane divided by its molar mass yields moles of butane.

1.03 g/58.12 g/mol is the formula for butane.

A mole of butane weighs 0.0177 mol.

Then, we can calculate the quantity of water created using the butane-to-water mole ratio:

Moles of water = [tex]\frac{5 mol H2O}{(1 mol C4H10 ×0.0177 mol C4H10)}[/tex] = 0.0885 mol.

Eventually, we can determine how much water was generated:

moles of water equal 0.0885 mol when 5 mol H2O is divided by 1 mol C4H10 and multiplied by 0.0177 mol C4H10.

Lastly, we can determine the mass of created water:

Water's mass is equal to its moles times its molar mass= 0.0885 mol × 18.02 g/mol = 1.59 g.

As a result, 1.03 g of butane will yield 1.59 g of water when it reacts with to moles of water equal 0.0885 mol when 5 mol H2O is divided by 1 mol C4H10 and multiplied by 0.0177 mol C4H10.

Lastly, we can determine the mass of created water:

Water's mass is equal to its moles times its molar mass = 0.0885 mol × 18.02 g/mol = 1.59 g.

As a result, 1.03 g of butane will yield 1.59 g of water when it reacts with too much oxygen.

To know more about mass, visit:

brainly.com/question/19694949

#SPJ1

Watch the animation and select the interactions that can be explained by hydrogen bonding.
HF
is a weak acid neutralized by NaOH
.
HF
has a higher boiling point than HCl
.
CH4
molecules interact more closely in the liquid than in the gas phase.
Ice, H2O
, has a solid structure with alternating H−O
interactions.
H2Te
has a higher boiling point than H2S

Answers

The interactions that can be explained by hydrogen bonding are:

HF has a higher boiling point than HClIce, H₂O, has a solid structure with alternating H−O interactions.

Hydrogen bonding is a type of intermolecular force that occurs between a hydrogen atom in a polar molecule and a highly electronegative atom, such as nitrogen, oxygen, or fluorine, in a neighboring molecule. It is a relatively strong force and can significantly affect the physical and chemical properties of substances.

In the case of HF and HCl, both molecules are polar, but HF has a higher boiling point due to the stronger hydrogen bonding between its molecules. In ice, the hydrogen bonding between water molecules creates a crystal structure with a characteristic lattice arrangement.

To learn more about Hydrogen bonding, here

https://brainly.com/question/30885458

#SPJ1

Compare and contrast the four different types of solar activity above the photosphere. (Select all that apply)

A. Prominences are huge loops of the Sun’s ionized but cool material that are pushed by magnetic forces from the chromosphere into the corona.

B. There are regions of higher density and temperature than the surrounding material in the chromosphere called plages.

C. Flares are long lived phenomena above the photosphere beginning at the solar minimum and ending at solar maximum.

D. Coronal mass ejections happen when a flare is so violent that the material exceeds the escape speed of the sun. It is connected to sunspots.

Answers

There are up to four different kinds of features that can be seen when viewing the photosphere. Sunspots, faculae, granulation, and super-granulation are listed in decreasing order of observational ease. All the given statement are true.

Solar activityIn the chromosphere, plateaus are areas that are more dense and hotter than the surrounding material. Large, chilly, ionized loops of material known as prominences are slowly pushed into the corona by magnetic energy from the chromosphere. Flares are erratic, fiery, and intensely energetic bursts that last only a moment or two. When a flare is extremely powerful, its material is thrown into the solar system beyond the Sun's escape velocity and causes coronal mass ejections. These are all essentially connected to sunspots.

For more information on solar activity above photosphere kindly visit to

https://brainly.com/question/9053722

#SPJ1

Under what conditions would one mole of methane gas, ch4 , occupy the smallest volume?

Answers

Under the condition A. 273 K and 1.01 × [tex]10^{5}[/tex] Pa, one mole of methane gas, [tex]CH_{4}[/tex], occupy the smallest volume.

What is the smallest volume ?

The ideal gas law, PV = nRT, can be rearranged to solve for volume as V = nRT/P, where V is volume, n is the number of moles, R is the gas constant, T is temperature in Kelvin, and P is pressure.

To find the conditions under which one mole of methane gas occupies the smallest volume, we need to find the combination of temperature and pressure that results in the smallest volume.

Using the equation V = nRT/P, we can see that volume is inversely proportional to pressure, so we want the highest pressure possible. Therefore, we can eliminate choices A and C, which have lower pressures than B and D.

Next, we need to consider temperature. Using the same equation, we can see that volume is directly proportional to temperature, so we want the lowest temperature possible. Therefore, the correct choice is A, which has a temperature of 273 K, the lowest temperature of all the choices.

Therefore, the answer is A. 273 K and 1.01  × [tex]10^{5}[/tex]  Pa.

To know more about volume, visit:

https://brainly.com/question/14423944

#SPJ9

Complete question is: Under the 273 K and 1.01 × [tex]10^{5}[/tex] Pa condition, one mole of methane gas, [tex]CH_{4}[/tex], occupy the smallest volume.

Which of the following reactants lead to the fastest reaction?
A) Solid aluminum and oxygen
B) Sodium hydroxide and hydrogen chloride in water
C) Copper nitrate and ethanol in water
D) Solid barium chloride and sodium sulfate​

Answers

Solid aluminum and oxygen are the reactant that lead to the fastest reaction. Therefore, the correct option is option A.

Chemical reaction, the transformation of one or more chemicals (the reactants) into one or more distinct compounds (the products). Chemical elements or chemical compounds make up substances.

Chemical reactions constitute a fundamental component of life itself, as well as technology and culture. Burning fuels, melting iron, creating glass or pottery, brewing beer, making wine. Solid aluminum and oxygen are the reactant that lead to the fastest reaction.

Therefore, the correct option is option A.

To know more about chemical reaction, here:

https://brainly.com/question/29039149

#SPJ1

What is molecular weight of a substance given that 1.22g of the sample was vaporised in 100ml flask at 45°C and 687mmHg.​

Answers

To calculate the molecular weight of a substance, we can use the ideal gas law, which relates the pressure (P), volume (V), number of moles (n), and temperature (T) of a gas:

PV = nRT

where R is the gas constant. Rearranging this equation gives:

n = PV / RT

We can use this equation to calculate the number of moles of the substance in the vapor phase. Then, we can use the definition of molecular weight, which is the mass of one mole of the substance, to calculate the molecular weight.

First, let's convert the temperature and pressure to SI units:

Temperature: 45°C = 318.15 K
Pressure: 687 mmHg = 91.6 kPa

Next, let's calculate the number of moles of the substance in the vapor phase. We know that 1.22 g of the substance was vaporized in a 100 mL flask, which is equivalent to 0.1 L. Therefore, the concentration of the substance in the vapor phase is:

c = 1.22 g / 0.1 L = 12.2 g/L

We can convert this concentration to units of pressure using the ideal gas law:

PV = nRT

n/V = P/RT

n/V = (91.6 kPa) / (8.314 J/mol K * 318.15 K) = 0.0361 mol/L

Therefore, the number of moles of the substance in the vapor phase is:

n = (0.0361 mol/L) * 0.1 L = 0.00361 mol

Finally, we can calculate the molecular weight using the definition of molecular weight:

molecular weight = mass / moles

mass = 1.22 g

moles = 0.00361 mol

molecular weight = 1.22 g / 0.00361 mol = 337.4 g/mol

Therefore, the molecular weight of the substance is approximately 337.4 g/mol.

50 points, and I’ll mark as brainliest!!!

Problem 1. Sea water contains dissolved salts at a total ionic concentration of about 1.13 mol×L–1. What pressure must be applied to prevent osmotic flow of pure water into sea water through a membrane permeable only to water molecules (at 25oC)?
Problem 2. What is the osmotic pressure of a solution prepared by adding 6.65 g of glucose to enough water to make 350 mL of solution at 35°C?
Problem 3. What is the osmotic pressure of a solution prepared by adding 9.0 g of glucose to enough water to make 450 mL of solution at 35°C?
Problem 4. What is the osmotic pressure of a solution prepared by adding 11.0 g of propanol to enough water to make 850 mL of solution at 25°C?
Problem 5. What is the osmotic pressure of a solution prepared by adding 65 g of glucose to enough water to make 35000 mL of solution at 15°C?

Answers

Problem 1:

The osmotic pressure can be calculated using the equation:

π = CRT

Where π is the osmotic pressure, C is the total concentration of dissolved particles, R is the gas constant (0.0821 L·atm/(mol·K)), and T is the temperature in Kelvin.

In this case, the total concentration of dissolved particles is 1.13 mol/L, and the temperature is 25°C, or 298 K.

π = (1.13 mol/L) (0.0821 L·atm/(mol·K)) (298 K) = 24.7 atm

Therefore, a pressure of 24.7 atm must be applied to prevent osmotic flow of pure water into seawater.

Problem 2:

The osmotic pressure of a solution can be calculated using the equation:

π = MRT

Where M is the molar concentration of the solution, R is the gas constant (0.0821 L·atm/(mol·K)), and T is the temperature in Kelvin.

First, we need to calculate the molar concentration of the glucose solution:

molar mass of glucose = 180.16 g/mol
moles of glucose = 6.65 g / 180.16 g/mol = 0.0369 mol
volume of solution = 350 mL = 0.350 L

Molar concentration = moles of solute / volume of solution = 0.0369 mol / 0.350 L = 0.105 M

Now we can calculate the osmotic pressure:

π = (0.105 M) (0.0821 L·atm/(mol·K)) (308 K) = 2.87 atm

Therefore, the osmotic pressure of the glucose solution is 2.87 atm.

Problem 3:

Using the same equation as in Problem 2:

molar mass of glucose = 180.16 g/mol
moles of glucose = 9.0 g / 180.16 g/mol = 0.0499 mol
volume of solution = 450 mL = 0.450 L

Molar concentration = moles of solute / volume of solution = 0.0499 mol / 0.450 L = 0.111 M

π = (0.111 M) (0.0821 L·atm/(mol·K)) (308 K) = 3.05 atm

Therefore, the osmotic pressure of the glucose solution is 3.05 atm.

Problem 4:

In this case, propanol is the solute, so we need to first calculate the molar concentration:

molar mass of propanol = 60.10 g/mol
moles of propanol = 11.0 g / 60.10 g/mol = 0.183 mol
volume of solution = 850 mL = 0.850 L

Molar concentration = moles of solute / volume of solution = 0.183 mol / 0.850 L = 0.215 M

π = (0.215 M) (0.0821 L·atm/(mol·K)) (298 K) = 4.84 atm

Therefore, the osmotic pressure of the propanol solution is 4.84 atm.

Problem 5:

molar mass of glucose = 180.16 g/mol
moles of glucose = 65 g / 180.16 g/mol = 0.361 mol
volume of solution = 35000 mL = 35.00 L

Molar concentration = moles of solute / volume of solution = 0.

Problem 1:

The osmotic pressure (π) can be calculated using the van 't Hoff equation: π = iMRT, where i is the van 't Hoff factor (1 for water), M is the molar concentration, R is the gas constant, and T is the temperature in Kelvin.

In this case, the molar concentration is 1.13 mol/L, and the temperature is 25°C = 298 K. So,

π = iMRT = (1)(1.13 mol/L)(0.08206 L·atm·K⁻¹·mol⁻¹)(298 K)

π = 29.8 atm

Therefore, a pressure of 29.8 atm must be applied to prevent osmotic flow of pure water into sea water through a membrane permeable only to water molecules at 25°C.

Problem 2:

The osmotic pressure of a solution can be calculated using the van 't Hoff equation: π = iMRT, where i is the van 't Hoff factor, M is the molar concentration, R is the gas constant, and T is the temperature in Kelvin.

First, we need to find the molar concentration of glucose in the solution. The molecular weight of glucose is 180.16 g/mol. So,

Molar concentration = (mass/volume) / (molecular weight)

Molar concentration = (6.65 g/0.35 L) / 180.16 g/mol

Molar concentration = 0.104 mol/L

Now, we can calculate the osmotic pressure:

π = iMRT = (1)(0.104 mol/L)(0.08206 L·atm·K⁻¹·mol⁻¹)(308 K)

π = 2.44 atm

Therefore, the osmotic pressure of the solution prepared by adding 6.65 g of glucose to enough water to make 350 mL of solution at 35°C is 2.44 atm.

Problem 3:

Using the same process as in Problem 2, we can find the molar concentration of glucose in the solution:

Molar concentration = (mass/volume) / (molecular weight)

Molar concentration = (9.0 g/0.45 L) / 180.16 g/mol

Molar concentration = 0.44 mol/L

Now, we can calculate the osmotic pressure:

π = iMRT = (1)(0.44 mol/L)(0.08206 L·atm·K⁻¹·mol⁻¹)(308 K)

π = 10.2 atm

Therefore, the osmotic pressure of the solution prepared by adding 9.0 g of glucose to enough water to make 450 mL of solution at 35°C is 10.2 atm.

Problem 4:

Propanol (C₃H₇OH) is a non-electrolyte, so its van 't Hoff factor is 1.

First, we need to find the molar concentration of propanol in the solution. The molecular weight of propanol is 60.10 g/mol. So,

Molar concentration = (mass/volume) / (molecular weight)

Molar concentration = (11.0 g/0.85 L) / 60.10 g/mol

Molar concentration = 0.178 mol/L

Now, we can calculate the osmotic pressure:

π = iMRT = (1)(0.178 mol/L)(0.08206 L·atm·K⁻¹·mol⁻¹(298 K)

π = 3.67 atm

Therefore, the osmotic pressure of the solution prepared by adding 11.0 g of propanol to enough water to make 850 mL of solution at 25°C is 3.67 atm.

Problem 5:

Using the same process as in Problem 2 and Problem 3, we can find the molar concentration of glucose in the solution:

Molar concentration = (mass/volume) / (molecular weight)

Molar concentration = (65 g/35,000 mL) / 180.16 g/mol

Molar concentration = 0.00177 mol/L

Now, we can calculate the osmotic pressure:

π = iMRT = (1)(0.00177 mol/L)(0.08206 L·atm·K⁻¹·mol⁻¹)(288 K)

π = 0.0398 atm

Therefore, the osmotic pressure of the solution prepared by adding 65 g of glucose to enough water to make 35,000 mL of solution at 15°C is 0.0398 atm.

3. A solution of hydrochloric acid is made by dissolving hydrogen chloride gas in 100.0ml water. This solution neutralizes a 15ml sample of 0.10 mol/L sodium carbonate solution. a. What mass of hydrogen chloride gas was dissolved in 100.0ml of water? b. What volume of hydrogen chloride was this?​

Answers

Okay, here are the steps to solve this problem:

a) To neutralize 15ml of 0.10 mol/L sodium carbonate solution, the hydrochloric acid solution must contain 0.015 moles of HCl.

Since the HCl solution is made by dissolving HCl gas in 100ml water, we can calculate the moles of HCl gas dissolved in 100ml:

0.015 moles HCl / 15ml sodium carbonate solution = X moles HCl gas / 100ml HCl solution

X = 0.015 * (100/15) = 0.01 moles HCl gas

b) Molar volume of HCl gas at STP is 24.45 L/mol.

So the volume of 0.01 moles HCl gas is: 0.01 moles * 24.45 L/mol = 0.2445 L

Since the solution is made with this gas in 100ml water, the volume of HCl gas dissolved in 100ml water is 0.2445 L.

So the final answers are:

a) 0.01 moles of HCl gas

b) 0.2445 L of HCl gas

Please let me know if you have any other questions!

Determine which statements are consistent with Daltons atomic theory

Answers

Answer:

Explanation:

Dalton's atomic theory had several postulates, including:

1. All matter is made up of atoms, which are indivisible and indestructible.

2. All atoms of a given element are identical in mass and properties.

3. Compounds are formed by a combination of two or more different kinds of atoms.

4. A chemical reaction is a rearrangement of atoms.

Based on these postulates, the following statements are consistent with Dalton's atomic theory:

1. Chemical reactions involve the rearrangement of atoms to form new compounds.

2. Elements are composed of small, indivisible particles called atoms.

3. Atoms of the same element have the same mass and chemical properties.

4. A compound is made up of two or more different elements.

5. Atoms can neither be created nor destroyed in a chemical reaction.

However, the following statements are not consistent with Dalton's atomic theory:

1. Atoms are divisible into smaller particles.

2. Isotopes of the same element have different chemical properties.

3. The mass of an atom is distributed uniformly throughout the atom.

It's worth noting that while Dalton's atomic theory has been largely superseded by modern atomic theory, it remains an important historical milestone in the development of atomic theory.

A 346.9 mL sample of carbon dioxide was heated to 373 K. If the volume of the carbon dioxide sample at 373 K is 596.2 mL,
what was its temperature at 346.9 mL?
T =

Answers

Answer:

216.9 K

Explanation:

We can use the combined gas law to solve this problem:

(P1V1/T1) = (P2V2/T2)

where P is pressure, V is volume, and T is temperature. We can assume that the pressure is constant, since the problem doesn't mention any changes in pressure.

Let's label the initial temperature T1 and the final temperature T2, and plug in the given values:

(P1V1/T1) = (P2V2/T2)

V1 = 346.9 mL

V2 = 596.2 mL

T2 = 373 K

(P1 * 346.9 mL / T1) = (P1 * 596.2 mL / 373 K)

Simplifying and solving for T1:

T1 = (P1 * 346.9 mL * 373 K) / (P1 * 596.2 mL)

T1 = (346.9 * 373) / 596.2

T1 = 216.9 K

Therefore, the temperature of the carbon dioxide sample at 346.9 mL was 216.9 K.

Hope this helps and be sure to mark this as brainliest! :)

How many carbon atoms are in 11.5 g C2H5OH?

Answers

There are approximately 3.02 x 10²³ carbon atoms in 11.5 g of [tex]C_{2}H_{5} OH[/tex]

To calculate the number of carbon atoms present in the 11.5g of [tex]C_{2}H_{5}OH[/tex]which is ethanol, we need to find and calculate the number of moles of ethanol present and convert moles to the number of carbon atoms by using Avogadro's number.

The molecular weight of [tex]C_{2}H_{5}OH[/tex] is =

no. of atoms x its atomic weight. So the molecular weight is,

(2 atoms of carbon x 12 g/mol )+ (5 atoms of hydrogen x 1 g/mol) + (1 atom of oxygen x 16 g/mol) + (1 atom of hydrogen x 1 g/mol ) =

24+10+16+1  ≅  47 g/mol

The number of moles of ethanol = given mass / molecular weight = 11.5g /47  g/mol =  0.2446 moles

Number of Carbon atoms = no. of moles of ethanol x Avogadro number x no. of carbon atoms in each molecule of ethanol =  0.2446 moles x 6.022 x 10²³ atoms/mol x 2 carbon atoms/molecule ≅ 3.02 x 10²³

To know more about Carbon Atom,

https://brainly.com/question/29486189

Calculation: 3. A new alloy of steel is 525 g at 100-C. It is dropped into 375 grams of water at 25 C. The final temperature changes to 55C, what is the specific heat of steel? ​

Answers

The specific heat capacity of the steel is 2 g/°C.

What is the specific heat capacity of the steel?

To determine the specific heat capacity of a particular sample of steel, the sample can be heated to a known temperature and then placed in contact with a known amount of water at a lower temperature.

We know that the heat lost by the steel is equal to the heat gained by the water.

Thus we have that;

-(525 * c * (55- 100)) = (375 * 4.2 * (55- 25)

23625c = 47250

c = 47250/23625

c = 2 g/°C

Learn more about specific heat capacity:https://brainly.com/question/29766819

#SPJ1

Calculate the molality of a solution prepared by dissolving 19.9 g of KCl in 750.0 mL of water.

Answers

Answer:

Explanation:

First, we need to calculate the moles of KCl:

Calculate the molar mass of KCl:

KCl = 39.10 g/mol (atomic weight of K) + 35.45 g/mol (atomic weight of Cl)

= 74.55 g/mol

Calculate the moles of KCl:

moles of KCl = mass of KCl / molar mass of KCl

= 19.9 g / 74.55 g/mol

= 0.267 mol

Next, we need to convert the mass of the solvent (water) from milliliters to kilograms:

Convert mL to L:

750.0 mL = 750.0 mL * (1 L / 1000 mL)

= 0.7500 L

Calculate the mass of water:

mass of water = volume of water x density of water

= 0.7500 L x 1000 g/L

= 750.0 g

Convert the mass of water to kilograms:

mass of water = 750.0 g / 1000 g/kg

= 0.7500 kg

Now we can calculate the molality of the solution:

molality = moles of solute / mass of solvent (in kg)

molality = 0.267 mol / 0.7500 kg

= 0.356 mol/kg

Therefore, the molality of the solution is 0.356 mol/kg.

What is the energy change for the following equation?

Answers

Answer:

1) -572 kJ/mol

2) -2220.7 kJ/mol

Explanation:

Multiply the bond enthalpies to take into account the amount of moles of each compound in the reaction. Then, to get the total change in energy/enthalpy in the reaction, subtract the reactant energy from the product energy.

1) 2(-286) = -572 kJ/mol

2) 4(-286) + -393.5(3) - -103.8 = -2220.7 kJ/mol

please help this is dus today please help ​

Answers

A percentage expressing the variation between a calculated/measured value and the anticipated/real value is known as a "calculated percent error."

What does this mean?

A positive numerical discrepancy implies that the assessed number exceeds what was expected, with negative values indicating the reverse.

When conducting an experiment, if an excessive percent error emerges it suggests potential errors or miscalculations in experimental design, data collection, or analysis.

This may mean unaccounted variables were present, and equipment/procedures require refinement. In opposition, lower percentages signal accuracy despite any limitations resulting from the human elements involved.

Read more about percent error here:

https://brainly.com/question/5493941

#SPJ1

Which of the diagrams show a beaker in which electrolysis takes place?

Answers

The beakers that we can see that electrolysis is going on are in beakers B and C

What is electrolysis?

Electrolysis is a process in which an electric current is passed through a substance to produce a chemical reaction. The substance being electrolyzed is usually an electrolyte, which is a liquid or solution that contains ions.

The electric current causes the ions in the electrolyte to move towards the electrodes (conducting surfaces) where they either gain or lose electrons, depending on the nature of the electrode and the ions. This causes chemical reactions to occur at the electrodes, leading to the formation of new substances.

Learn more about electrolysis:https://brainly.com/question/12054569

#SPJ1

Select the correct answer. A certain reaction has this form:aA bB. At a particular temperature and [A]0 = 2.00 x 10-2 Molar, concentration versus time data were collected for this reaction and a plot of ln[A]t versus time resulted in a straight line with a slope value of -2.97 x 10-2 min-1. What is the reaction order and rate law for this reaction? A. first, rate = k[A] B. first, rate = k[A]2 C. second, rate = k[A] D. second, rate = k[A]2 E. third, rate = k[A]

Answers

The reaction order and rate law for this reaction is first, rate = k[A]. Option A is correct.

The reaction order and rate law for a reaction can be determined from the slope of a plot of ln[A] versus time.

Given that the plot of ln[A] versus time resulted in a straight line with a slope value of -2.97 x 10⁻² min⁻¹, we can determine the reaction order and rate law as follows;

If the slope is equal to 1, the reaction order is 1st order.

If the slope is equal to 2, the reaction order is 2nd order.

If the slope is equal to 3, the reaction order is 3rd order.

From the given slope of -2.97 x 10⁻² min⁻¹, we can conclude that the reaction order is 1st order, because the slope value is equal to -1 times the reaction order. So, the reaction order for this reaction is 1st order.

The rate law for a 1st order reaction will be given by;

rate = k[A]

where [A] is the concentration of the reactant, and k is the rate constant.

Therefore,  first, rate = k[A].

Hence, A. is the correct option.

To know more about rate law here

https://brainly.com/question/30379408

#SPJ1

Explain to me please????​

Answers

Answer:Non polar.

Explanation:because water is polar because of its shape

For which of the following reactions does ΔH
o
rxn
= ΔH
o
f
?

(a) H2(g) + S(rhombic) → H2S(g)

(b) C(diamond) + O2(g) → CO2(g)

(c) H2(g) + CuO(s) → H2O(l) + Cu(s)

(d) O(g) + O2(g) → O3(g)

Answers

ΔH° = ΔHf° is true for two reactions which are ,

H₂(g) + S(rhombic) → H₂S(g)

C(diamond) + O₂(g) → CO₂(g)

Hence, option a and b are correct.

∆Hf is the enthalpy of formation, is the enthalpy when product is made from its constituent elements. Generally the enthalpy of formation is described as the standard reaction enthalpy for the formation of the compound from its elements (which may include atoms or molecules) in their most stable reference states at the chosen temperature (298.15K) and at 1bar pressure.

In a part, H₂S is formed by H₂ and S means it's constituent elements.

So, a is correct.

In b also, CO₂ is formed by C and O₂, so b is also correct. Hence, option a and b are correct.

Learn more about enthalpy of formation from the link given below.

https://brainly.com/question/28302300

#SPJ1

Macmillan Learning
A 346.9 mL sample of carbon dioxide was heated to 373 K. If the volume of the carbon dioxide sample at 373 K is 596.2 mL,
what was its temperature at 346.9 mL?
T=. K

Answers

Answer:

Explanation:

Use the Equation: [tex]\frac{V1}{T1}=\frac{V2}{T1} \\[/tex]

V1 = 346.9 mL

T1 = ? K

V2 = 596.2 mL

T2 = 373 L

This assumption can only be made when pressure is held constant.

[tex]\frac{346.9}{V1}=\frac{596.2}{373}, solve for V1\\ V1 = 217.0 K[/tex]

How many chloride ions are in 15.0 mL of a 2.5 molar solution of magnesium chloride? (MgCl2)

Answers

In 15.0 mL of a 2.5 molar magnesium chloride solution, there are approximately 4.51 × 10^{22} chloride ions.

How many chloride ions are there in MgCl_2?

An inorganic compound composed of one magnesium ion and two chloride ions.

We must first determine the number of moles of MgCl_2 in the solution,

moles of solute = concentration × volume (in liters)

Converting the solution's volume from milliliters to liters,

15.0 mL = 15.0 × 10^{-3} L

moles of MgCl_2 = 2.5 mol/L × 15.0 × 10^{-3} L = 0.0375 moles

The solution contains the following number of chloride ions:

number of Cl^{-} ions = 2 × moles of MgCl_2

Substitute the value of moles of MgCl_2,

number of Cl^{-} ions = 2 × 0.0375 moles = 0.075 moles

by using Avogadro's number:

number of Cl^{-} ions = 0.075 moles × 6.02 × 10^{23} ions/mol ≈ 4.51 × 10^{22} ions

To know more about the magnesium chloride visit:

https://brainly.com/question/31108110

#SPJ1

Show that the following reaction obeys zero order kinetics, and find the rate constant and half-life. 10²x[A]/mol dm-3 13.80 11.05 8.43 5.69 3.00 Time/hr 0 10 20 30 40

Answers

The half life for the given reaction is 20s. The rate constant for the given zero order reaction can be given as 0.5mol L⁻¹s⁻¹.

According to the definition of a zero-order reaction, it is "a chemical reaction that occurs when the rate of response remains unchanged whether the percentage of the reactants increases or decreases." Since the rate increases according in proportion to the 0th magnitude of the reactant concentration, the rate at which these responses is always equivalent to the constant rate for the particular reactions.

k = 0.5mol L⁻¹s⁻¹

Half life is a/2K=3/2×40

                        = 20s

To know more about zero order reaction, here:

https://brainly.com/question/29811492

#SPJ1

Give the number of significant figures indicated.

0.066

Answers

There are 3 significant figures, because after a . A 0 and the numbers after it count as sig figs

A sample of helium gas, He(g), is placed in a rigid cylinder sealed with a movable piston.
The temperature of the helium is 25.0°C. The volume of the helium is 300. milliliters and
the pressure is 0.500 atmosphere.

16) State, in terms of the average distance between the helium atoms, why the density of the gas increases when the piston is pushed farther into the rigid cylinder. [1]

17) Determine the volume of the helium gas when the pressure is increased to 1.50 atm and
the temperature remains at 25.0°C. [1]

Answers

(16) When the piston is pushed farther into the rigid cylinder, the volume available for the helium gas decreases. This leads to an increase in density because the gas molecules are packed into a smaller volume, resulting in a shorter average distance between the helium atoms; (17) volume = 100mL.

What will be the effect on density on pushing the piston  farther into the rigid cylinder?

When the piston is pushed farther into the rigid cylinder, the volume available for the helium gas decreases. This causes the average distance between the helium atoms to decrease as well. Since the volume available for the gas molecules to move in is reduced, they will collide more frequently with each other and with the walls of the container, leading to an increase in density.

(17) To determine the new volume of the helium gas, we can use the combined gas law:

(P1V1)/T1 = (P2V2)/T2

where P1, V1, and T1 are the initial pressure, volume, and temperature of the helium gas, and P2 and T2 are the final pressure and temperature.

Substituting the given values, we get:

(0.500 atm)(300. mL)/(298.15 K) = (1.50 atm)(V2)/(298.15 K)

Solving for V2, we get:

V2 = (0.500 atm)(300. mL)/(1.50 atm) = 100. mL

Therefore, the volume of the helium gas when the pressure is increased to 1.50 atm and the temperature remains at 25.0°C is 100mL.

Learn more about density here:

https://brainly.com/question/29775886

#SPJ1

What is the temperature of 0.59 mol of gas at a pressure of 1.0 atm and a volume of 11.0 L? (Express the temperature in kelvins to two significant figures).

Answers

Answer:

T = 230 K

Explanation:

Simply use the equation: PV = nRT, where P is pressure, V is volume, n is moles, R is 0.0821, and T is temperature in kelvin

Place the values in

(1.0 atm)(11.0 L)=(0.59 moles)(0.0821 Lxatm/Kxmol)(T)

Solve for T = 230 K

Classify each of the following aqueous solutions as a nonelectrolyte, weak electrolyte, or strong electrolyte.
(a) PbCl2
(b) N(CH3)3
(c) CsOH
(d) H2S
(e) CrCl2
(f) Ni(CH3COO)2

Answers

Strong electrolyte: lead(II) chloride weak electrolyte trimethylamine Strong electrolyte: cesium hydroxide sulphide of hydrogen: a weak electrolyte, strong electrolyte chromium chloride Weak electrolyte: nickel(II) acetate

Is acetic acid an electrolyte that is weak?

Response and justification The fact that acetic acid has a low dissociation constant suggests that it is a weak acid. Acetic acid's restricted ability to ionise in an aqueous solution is a result of its low dissociation constant. With this in mind, acetic acid can be regarded as a weak electrolyte.

Is acid phosphoric a type of electrolyte?

Phosphoric acid is a useful electrolyte because of its low volatility, strong ionic conductivity, stability at high temperatures, carbon dioxide and carbon monoxide tolerance, and low flammability.

To know more about weak electrolyte visit:-

https://brainly.com/question/29771118

#SPJ1

Other Questions
an expression such as a b * c is called infix notation (T/F) Consider an airplane patterned after the Fairchild Republic A-10, a twin-jet attack aircraft. The airplane has the following characteristics: wing area = 47 m2, aspect ratio = 6.5, Oswald efficiency factor = 0.87, weight = 103,047 N, and zero-lift drag coefficient = 0.032. The airplane is equipped with two jet engines with 40,298 N of static thrust each at sea level. Calculate the maximum rate of climb for the twin-jet aircraft at sea level and at an altitude of 5 km. Refer to the power plot of the airplane given below at sea level and at 5 km altitude. The excess power at sealevel is 9000 kW and the excess power at 5 km is 5000 kW. 30+ 25+ 20+ sea level 15 + 10 5 km] PA PA PR A PR 1 o 100 158 200 250 300 Ve o 100 150 (m/sec) (m/sec) The maximum rate of climb for the twin-jet aircraft at sea level is [ m/s. The maximum rate of climb for the twin-jet aircraft at an altitude of 5 km is m/s. If banks are holding relatively more reserves, they are lending out relatively _____ than before, thus giving rise to _____ value of the money multiplier. Last one!! thank you By means of a plate column, acetone is absorbed from its mixture with air in a non-volatile absorption oil. The entering gas contains 20 mole percent acetone, and the entering oil is acetone-free. Of the acetone in the air, 98.5 percent is to be absorbed, and the concentration of the liquor at the bottom of the tower is to contain 8 mole percent acetone. The equilibrium relationship is ye=1.85xe. Plot the operating line and determine the minimum number of stages. Hint: Choose 100 moles of entering gas as a basis. Each month, 600 hours of time are available on each machine, and that customers are willing to buy up to the quantities ofeach product at the prices that are shown below:Demands. pricesmonth 1. month2. month1. month2product 1. 120. 200. $60. $15product 2. 150. 130. $70. $35The company's goal is to maximize the revenue obtained from selling units during the next two months.how many constraints does this problem have (not counting the non-negativity constraints)?a.4b.6c.10d.8 Mg(s) + HCl(ac) - MgCl2(AC) + h2(g)hay que balancearlo ayuda por favor would the market-value debt ratio tend to be higher than the book-value debt ratio during a stock market boom or a recession? If putting pressure on your toes or heels will make your snowboard turn, what can you infer will happen if you did not apply pressure with your toes or heels? a. You will still turn-snowboards are impossible to control! c. You will continue in a straight line. b. You will move backwards. d. You will jump into the air. Please select the best answer from the choices provided A B C D Fiscal Administration(10th Edition) Estimating Revenue from a New TaxThe preparation of revenue estimates is particularly challenging when the tax change being proposed is for a new tax. In that instance, the tax system typically provides no relevant information for preparing the estimate, meaning that the estimate will be prepared from a grab bag of data pulled from many sources, none of which exactly match the terms of the new tax law.What estimating protocol is used for the tax? Do you think this is the appropriate approach in this instance? Find the critical numbers of the function. (Enter your answers as a comma-separated list. If an answer does not exist, enter DNE.)g(x) =3^64 x2cubed root of 64-x^2 The nurse is reviewing the list of new client admissions. For which of these clients should contact precautions be implemented?A 45 year-old diagnosed with pneumoniaA 3 year-old diagnosed with scarlet feverA 6 year-old diagnosed with mononucleosisA 60 year-old diagnosed with herpes simplex what is the length of a scaled drawing with a width of 9cm and the scale factor 3/4? The figure below shows roads near a pond. Each segment of the triangle represents a road or a path, except AB which represents the distance across the pond. Are the two triangles similar? The deliberate intent to draw creative inspiration from the composer's own homeland is known asA. exoticism.B. individualism.C. nationalism.D. verismo. the point of view that scientists will eventually be able to explain everything about the mind via biology is called? Which of the following frequencies is equivalent to a frequency of 100 MHz? determine whether the sequence converges or diverges. if it converges, find the limit. (if the sequence diverges, enter diverges.) a_n = n^4 n^3 9nlim n[infinity] a_n = ____ Question 1(Multiple Choice Worth 2 points)(Slope-Intercept Form MC)The amount of laps remaining, y, in a swimmer's race after x minutes can be represented by the graph shown.coordinate grid with the x axis labeled time in minutes and the y axis labeled number of laps remaining with a line from 0 comma 24 and 6 comma 0Determine the slope of the line and explain its meaning in terms of the real-world scenario. The slope of the line is 6, which means that the swimmer will finish the race after 6 minutes. The slope of the line is 24, which means that the swimmer must complete 24 laps in the race. The slope of the line is 4, which means that the swimmer will complete 4 laps every minute. The slope of the line is negative one fourth, which means that the swimmer completes a lap in one fourth of a minute.Question 2(Multiple Choice Worth 2 points)(Systems of Linear Equations MC)Two siblings, sibling A and sibling B, are saving money for their summer vacation. The amount of money that sibling A has in their savings account, y, can be represented by the equation y = 10x + 25, where x represents the number of weeks. Sibling B's savings can be represented by the equation y = 5x + 50.Based on the graph of this system of linear equations, after how many weeks will their savings accounts have the same amount of money? 2.5 weeks 5 weeks 15 weeks 75 weeksQuestion 3(Multiple Choice Worth 2 points)(Identifying Transformations LC)Polygon ABCD is rotated to get polygon ABCD.Graph of polygon ABCD in quadrant 2 with point A at negative 7 comma 5, point B at negative 2 comma 8, point C at negative 2 comma 4, and point D at negative 4 comma 3 and polygon A prime B prime C prime D prime in quadrant 1 with point A prime at 5 comma 7, point B prime at 8 comma 2, point C prime at 4 comma 2, and point D prime at 3 comma 4Determine the direction and angle of rotation. 270 clockwise rotation 270 counterclockwise rotation 90 counterclockwise rotation 180 clockwise rotationQuestion 4(Multiple Choice Worth 2 points)(Scatter Plots MC)Data was collected on the price per cupcake on orders of different amounts from a bakery. The scatter plot shows the data that was gathered.scatter plot titled cupcake pricing with the x axis labeled number of cupcakes and the y axis labeled cost per cupcake in dollars with points at 1 comma 6, 2 comma 5, 2 comma 5.5, 3 comma 5.5, 4 comma 5, 4 comma 5.5, 5 comma 4.5, 6 comma 3.5, 7 comma 2, 8 comma 1, and 9 comma 0.5Which of the following describes the pattern of association for the scatter plot? There is a weak, positive linear association. There is a weak, negative linear association. There is a strong, positive nonlinear association. There is a strong, negative nonlinear association.Question 5(Multiple Choice Worth 2 points)(Similar Triangles MC)Triangle ABC ~ triangle DEF.triangle ABC with side AB labeled 11, side CA labeled 7.6 and side BC labeled 7.9 and a second triangle DEF with side DE labeled 2.2Determine the measurement of FD. FD = 1.52 FD = 1.58 FD = 1.1 FD = 5.5Question 6(Multiple Choice Worth 2 points)(Slope MC)What is the slope of the line that contains the points (3, 1) and (3, 10)? Undefined 0 negative two thirds negative three halvesQuestion 7(Multiple Choice Worth 2 points)(Experimental Probability MC)An experiment is conducted with a coin. The results of the coin being flipped twice 200 times is shown in the table.Outcome FrequencyHeads, Heads 40Heads, Tails 75Tails, Tails 50Tails, Heads 35What is the P(No Heads)? 85% 75% 50% 25%Question 8(Multiple Choice Worth 2 points)(Dilations MC)Triangle ABC is dilated to produce triangle ABC.Graph of a triangle ABC with vertices at A 10 comma 2, B 18 comma 2, C 18 comma 10. Triangle A prime B prime C prime with vertices at A prime 5 comma 1, B prime 9 comma 1, C prime 9 comma 5.Determine the scale factor used to create the image. one fourth one half 2 4 (Blank) model assumes that all cities grow in a natural way with the same five zones.O Metaphor of the ledgerO Urban sprawlO Concentric circlesO Priority