Answer:
A
Explanation:
A conversion factor is a fraction whose numerator and denominator are the same quantity expressed in different units.
The given statement that a conversion factor is a fraction in which the numerator is equal to denominator is true.
What is a conversion factor?
Conversion factor is an expression which is used for obtaining relationship between units of a measurable quantity without any need of changing the value.It is also known as unit factor and is always equal to one.
Here the numerator represents part out of the whole portion .While the denominator represents the total number of parts.The method is based on the fact that any number or an expression can be multiplied by one without changing it's value.
As the multiplication by one does not change the value of measurement and so there is no change in the measurement units.It is a formula used for converting a measurement in one set of units to same measurement in another set of units.
It is usually given as a numerical ratio or fraction which can be used as a multiplication factor. Some examples of measurements which require conversions are: length,area and volume.
To learn more about conversion factors visit:
https://brainly.com/question/28366871
#SPJ2
During the workup portion of the reaction of alkenes with HBr as described in the experiment provided, a student transferred the reaction mixture to a separatory funnel, rinsed the reaction flask with diethyl ether, and added the ether rinses to the separatory funnel. The student then added sodium bicarbonate to the separatory funnel. Extremely vigorous bubbling occurred. What did the student do wrong
Answer:
Explanation:
Because of the acid-base reaction, as sodium bicarbonate is introduced to the separatory funnel, the additional or unreacted HBr reacts vigorously to yield CO2 gas, which exits the separatory funnel together with any dissolved compound(s) in the ether layer. This is due to a wrong and incorrect selection of the solvent mixture and the addition of sodium bicarbonate to an acidic solution.
Nothing to do with it until it has leaked out of the separatory funnel. Even then, the student may separate the components from the remaining reaction mixture by washing the ether coating layer several times with brine water, then running it into a dry sodium sulfate bed and evaporating solvent ether under decreased pressure.
Carbon-11 decays by position emission.The nuclide formed product is
Answer:
They demonstrated that carbon-11 decays by positron emission to the stable nuclide 11B [Eq. (1)].
I need help to get the correct answers for this task.
Answer:
*Numbering from left to right.
Synthesis: 1,2,9
Decomposition: 4,7,11
Single Replacement: 3,6
Double Replacement: 5,8,10, 12
Explanation:
Synthesis=A+B->AB; 2 separate elements getting together
Decomposition=AB->A+B; 2 Elements that are bonded separating
Single Replacement=A+BC->AX+B; a single swap
Double replacement=AX+BY-> AY+BX; a double swap
करताह!
गर्मियों में घड़े का जल ठंडा क्यों होता है?
Answer:
I don't understand the question
Explanation:
what is your name
how many liters of N2 gas is needed to produce 500 L NH3?
How do conduction, convection, and radiation redistribute incoming solar energy?
The solar energy from sun is radiating to the earth's surface and making the atmosphere warmer. The heat energy is redistributing back by through different heat transfer modes.
What is heat transfer?Heat energy transfer from hotter region to colder region by the temperature gradient. The heat is transferring through solids by conduction. Conduction is the process of heat transfer through the closely packed particles in solids.
Heat transfers through convection in liquids. Where the hot molecules rise to the surface and transfers the heat to other molecules. The heat radiated to the earth make the sources in earth warmer. Through convection, the water molecules heat up.
The water vapor formed by convection process radiates to the atmosphere and redistributes the energy back.
To find more on radiation, refer here:
https://brainly.com/question/13934832
#SPJ2
substance x is a gas at room tempreture
Answer:
whats the question?
Explanation:
how do you solve the expending form for 3(2+5)
Answer:
it's expanding from is 15
Answer:
Explanation:
3( 2+5 )
3. ( 7 )
3 . 7= 21
have a good day!T/F Adsorption is a real problem in gravimetry, especially when the particle size is large
Answer:
False
Explanation:
How many grams are there in 1.8055 x 10^25 molecules of sodium sulfate? Hint: Convert to moles first
Answer:
4258.82 g of Na₂SO₄
Explanation:
From the question given above, the following data were obtained;
Number of molecules of Na₂SO₄ = 1.8055x10²⁵ molecules.
Number of mole of Na₂SO₄ =?
From Avogadro's hypothesis,
6.02×10²³ molecules = 1 mole
Therefore,
6.02×10²³ molecules = 1 mole of Na₂SO₄
Next, we shall determine the mass of 1 mole of Na₂SO₄. This can be obtained as follow:
1 mole of Na₂SO₄ = (23×2) + 32 + (16×4)
= 46 + 32 + 64
= 142 g
Thus,
6.02×10²³ molecules = 142 g of Na₂SO₄
Finally, we shall determine the mass of Na₂SO₄ that contains 1.8055x10²⁵ molecules. This can be obtained as follow:
6.02×10²³ molecules = 142 g of Na₂SO₄
Therefore,
1.8055x10²⁵ molecules
= (1.8055x10²⁵ × 142) / 6.02×10²³
= 4258.82 g of Na₂SO₄
Thus, 4258.82 g of Na₂SO₄ contains 1.8055x10²⁵ molecules
Bears stop coming to a river ecosystem where they have been eating many fish each day. The fish the bears eat normally eat smaller fish, which eat plants along the river bottom.
What happens to the ecosystem?
Both the larger and the smaller fish populations grow quickly but then die out because the plant life is insufficient for them all to eat.
The larger fish population will drop first, and the smaller fish population will grow quickly. The plants will die off because too many of the smaller fish are eating them.
The larger fish population explodes at first, and the smaller fish population begins to drop. Eventually, the river runs out of smaller fish so larger fish die out, and the plant population grows.
The smaller fish population begins to eat more plants and to grow. The larger fish have more food to eat so their population is able to grow, too.
Answer:
The larger fish population explodes at first, and the smaller fish population begins to drop. Eventually, the river runs out of smaller fish so larger fish die out, and the plant population grows.
Explanation:
6. If 4 mole of the rocket fuel ammonium perchlorate, NH4C/04 (s) is
allowed to react with excess Al so all of the NH4ClO4 is consumed, how
many grams of water will be produced?
3NH_CI04 (s) + 3Al (s) Al2O3 (s) + AlCl3 (s) + 3NO (g) + 6H2O (g)
Answer:
144g of H₂O
Explanation:
3NH₄ClO₄(s) + 3Al → Al₂O₃(s) + AlCl₃(s) + 3NO(g) + 6H₂O(g)
From the equation:
3 moles of NH₄ClO₄ produced 6 moles of H₂O
4 moles of NH₄ClO₄ produced ? moles of H₂O
(4 ₓ 6)/3 = [tex]\frac{24}{3}[/tex] = 8 moles of H₂O
1 mole of H₂O = (1 × 2) + 16 = 18g (The Relative Molecular mass of H₂O)
8 moles of H₂O = ?
Therefore 8 × 18 = 144g
=144g of H₂O
Using the following balanced formula, determine the number of molecules
of CH4 needed to produce 12 molecules of CCl4.
CH4 + 4C12 --> CC14 + 4HCI
Answer:
12 molecules CH₄
Explanation:
Step 1: Write the balanced equation
CH₄ + 4 Cl₂ ⇒ CCl₄ + 4 HCI
Step 2: Establish the appropriate molecular ratio
According to the balanced equation, the molecular ratio of CH₄ to CCl₄ is 1:1.
Step 3: Determine the number of molecules of CH₄ needed to produce 12 molecules of CCl₄
We will use the previously established molecular ratio.
12 molecules CCl₄ × 1 molecule CH₄/1 molecule CCl₄ = 12 molecules CH₄
If one of these stars happens to be blue, which star is most likely to be that color?
Answer:
(D) 15,000
Explanation:
I took the test trust me.
Answer:
D
Blue stars are the hottest ones, so the hottest of these stars should be a blue one.
Hope that helps! :)
-Aphrodite
Explanation:
3. Determine the moles of sodium, Na, containing 7.9x1024 atoms.
Answer:
12.7mol Na.
Explanation:
Hello there!
In this case, according to the concept of mole, which stands for the amount of substance, we can recall the concept of Avogadro's number whereby we understand that one mole of any substance contains 6.022x10²³ particles, for the given atoms of sodium, we can calculate the moles as shown below:
[tex]7.9x10^{23}atoms*\frac{1mol}{6.022x10^{23}atoms} \\\\[/tex]
Thus, by performing the division we obtain:
[tex]12.7molNa[/tex]
Regards!
PLEASE HELP Describe at least two advantages and two disadvantages of using hydropower as a
source of energy.
PLS ONLY ANSWER THE FULL QUESTION ON HERE DO NOT SEND A LINK FOR ME TO CLICK!!!!!!!!!!!!!!!!!!!!!!!!!!
Answer:
Advantage: Hydropower is a fueled by water, so it's a clean fuel source.
Advantage: It is a domestic source of energy in the US.
Disadvantage: Fish populations can be impacted if fish cannot migrate upstream past impoundment dams to spawning grounds or if they cannot migrate downstream to the ocean.
Disadvantage: Hydropower plants can be impacted by drought. When water is not available, the hydropower plants can't produce electricity.
Explanation:
Generally the ionization potential in a period increases, but there are some exceptions. The one which is not an exception is
1) Be & B 2) N & O 3) Mg & Al 4) Na & Mg
Answer:
Generally, the first ionisation energy increases along a period. But there are some exceptions one which is not an exception
A 35 Liter tank of Oxygen is at 315 K with an internal pressure of 190 atmospheres. How many moles of gas does the tank contain?
Final volume of a .50 M H3PO4 solution prepared from 50 mL of a 6 M H3PO4 solution
Answer:
600 mL
Explanation:
From the question given above, the following data were obtained:
Initial concentration (C₁) = 6 M
Initial volume (V₁) = 50 mL
Final concentration (C₂) = 0.5 M
Final volume (V₂) =?
Using the dilution formula (i.e C₁V₁ = C₂V₂) we can obtain the final volume as illustrated below:
C₁V₁ = C₂V₂
6 × 50 = 0.5 × V₂
300 = 0.5 × V₂
Divide both side by 0.5
V₂ = 300 / 0.5
V₂ = 600 mL
Thus, the final volume is 600 mL
What is the wavelength of a 3 x 1012 Hz infrared wave?
A. 3 x 10-3 m
B. 1x 104 m
C. 3 x 1020 m
D. 1 x 10-4 m
SUBMIT
Answer:
D
Explanation:
wavelength = speed of light/ frequency
= (3 x 10^8 m/s) / (3 x 10^12 Hz)
= 1 x 10^-4 m
What is the wavelength of a photon with an energy of 3.26 x 10-19 J?
A. 527 nm
B. 610 nm
C. 492 nm
D. 671 nm
Answer:
610 nm
Explanation:
Apx
Describe the structure of ammonium laurel sulfates refer to the given diagram. Your answer should include the type of bonding, the elements contained, and the size and shape of the molecule. Write a short paragraph
Answer:
This ammonium laurel sulfates anion consists of a nonpolar hydrocarbon chain and a polar sulfate end group. It means it has a hydrophilic head and hydrophobic tail. There are ammonium ions, sulfate, and fatty acids present.
Lauryl sulfate has lauric acid attach to sulfate ions with carbon-sulfur bond, the fatty acid formed by the covalent bonds between C-C attached to hydrogens. Sulfur also bound to oxygen by covalent bonds. Nitrogen is surrounded by the four hydrogen atoms in the hydrophilic head.
Lauryl sulfate has lauric acid attach to sulfate ions with carbon-sulfur bond, the fatty acid formed by the covalent bonds between C-C attached to hydrogens.
What is a bond?A chemical bond is what holds atoms together in molecules.
Ammonium Laureth Sulfate is an ammonium salt of ethoxylated lauryl sulfate, a surfactant that contains PEG (polyethylene glycol) in its structure.
Ammonium laurel sulfates anion consists of a nonpolar hydrocarbon chain and a polar sulfate end group.
It means it has a hydrophilic head and hydrophobic tail. There are ammonium ions, sulfate, and fatty acids present.
Lauryl sulfate has lauric acid attach to sulfate ions with carbon-sulfur bond, the fatty acid formed by the covalent bonds between C-C attached to hydrogens.
Sulfur also bound to oxygen by covalent bonds. Nitrogen is surrounded by the four hydrogen atoms in the hydrophilic head.
Learn more about the bond here:
https://brainly.com/question/10777799
#SPJ5
During energy conversions, some energy is always lost as _____.
heat
electricity
chemical energy
light
Answer:
electricity
Explanation:
I know this because I am currently learning about this and remember doing it
A 27.5g piece of aluminum sits in a room and cools. It loses 6120.0 J of heat. If the initial
temperature of aluminum is 157.3°C, what is the final temperature? The specific heat
capacity of aluminum is 0.900 J/gºC.
Answer:
[tex]T_2= -90.0°C[/tex]
Explanation:
Hello!
In this case, according to the given description of how the temperature changes for aluminum in agreement to the loss of heat of 6120.0 J, we can use the following equation:
[tex]Q=mC\Delta T=mC(T_2-T_1)\\\\[/tex]
Thus, by knowing Q, m, C and the initial temperature, we are able to obtain:
[tex]T_2=T_1+\frac{Q}{mC}\\\\T_2=157.3\°C+\frac{-6120.0J}{27.5g*0.900 J/g\ºC}\\\\T_2= -90.0°C[/tex]
Regards!
4NH3 + 502 - 6H20 + 4NO
How many grams of O2 are required to produce 0.3 mol of H20?
4NH3 + 5O2 --> 6H2O + 4NO
How mant grams of NO are produced from 1.55 mol of NH3?
4NH3 + 5O2 --> 6H2O + 4NO
How many grams of NO is produced if 12g of 02 is combined with ammonia?
Explanation:
4NH3 + 502 - 6H20 + 4NO
How many grams of O2 are required to produce 0.3 mol of H20?
4NH3 + 5O2 --> 6H2O + 4NO
How mant grams of NO are produced from 1.55 mol of NH3?
4NH3 + 5O2 --> 6H2O + 4NO
How many grams of NO is produced if 12g of 02 is combined with ammonia?
Which statement about nuclear fission and nuclear fusion is not correct?
A. Both processes change atoms of one element to another element.
B. Both processes can release huge amounts of energy.
C. Both processes conserve mass.
D. Both processes produce dangerous radiation.
The statement, that describes about nuclear fission and nuclear fusion is "both processes can release huge amounts of energy."
What is nuclear fission and fusion?Nuclear fission is the process by which an atom's nucleus breaks into two or more smaller nuclei. Nuclear fusion is the process by which two light atomic nuclei merge to produce a single heavier one, releasing huge quantities of energy in the process.
Fusion and fission are both nuclear reactions that yield significant amounts of energy that can be used to generate power. However, fission is the splitting of atoms, whereas fusion is the joining of them.
To put in another way, while both nuclear reactions that generate energy, the methods are vastly different. They both produce a lot of energy.
Hence the correct answer is B.
Learn more about nuclear fission and nuclear fusion here
https://brainly.in/question/47666389
#SPJ2
Answer:it’s not B
Explanation:
What is the mass (in grams) of 2.55 x 1022 molecules of water?
Explanation:
hope the picture above make sense:)
what is the difference between transmutation and natural radioactivity
Viscosity is a measure of:
A. how much resistance to flowing a fluid has.
B. how much space a fluid takes up.
C. how much matter a fluid is made of.
D. how much fluid is in a given volume.
Viscosity is the measure of how much resistance to flowing any given fluid has; answer choice A. The formula to calculate the viscosity of a liquid is...
F = μA(u/y)
Howyiong did Newton live?
Answer:4 January 1643 [O.S. 25 December 1642] Woolsthorpe-by-Colsterworth, Lincolnshire, England
Died 31 March 1727 (aged 84) [O.S. 20 March 1726] Kensington, Middlesex, Great Britain
Explanation: