A compound is found to contain 59.94 % carbon, 13.44 % hydrogen, and 26.62 % oxygen by mass. What is the empirical formula for this compound

The density of chlorine will be  3.163 g/L.

The mass of a substance per unit of volume is its density. According to Graham's law, a gas's rate of effusion is inversely proportional to its square root density. When a material's particles are concentrated in a low area, they tend to travel to the place where the concentration is highest. When we use perfume or a scented spray in one area of the room and subsequently can smell it throughout the entire space, that is a simple illustration of this process.

rate1 = H2 = 5.93

rate2 = Cl2 = 1

The molecular weight of H2 = 2.016

The molecular weight of Cl2 = x.

By Graham's Law:

5.93 / 1 = x / 2.016

35.1649 = x / 2.016

x = 70.89 g/mol

Determine gas density by volume

70.89 g / 22.414 L = 3.163 g/L

Learn more about Density

brainly.com/question/28929608

#SPJ4

9.03 liters of carbon dioxide gas would contain 0.40 moles of carbon dioxide molecules. Since 1 mole of any gas contains 6.02 x 10^23 molecules, the number of molecules of carbon dioxide gas in 9.03 liters of carbon dioxide gas at STP would be 2.41 x 10^23 molecules.

Molecules are the smallest units of matter that can exist by themselves. They are composed of two or more atoms that are held together by chemical bonds. Molecules can be found in the air we breathe, the water we drink, and the food we eat. They can also be found in living organisms, like plants and animals. Molecules can be made of a variety of different atoms, such as oxygen, carbon, nitrogen, and hydrogen.

To learn more about molecules

https://brainly.com/question/26044300

#SPJ1

Nitrate NO 2 It is inappropriate to use one of the following ions' names and formulas.

Herbicides, explosives, defoliants, paper, leather, dyes, matches, and inks are all made from it. It's also used to make cosmetics and medications. An inorganic salt of sodium with the counter-ion chlorate is known as sodium chlorate. It serves as both a herbicide and an oxidizing agent for bleaching paper.

Chlorate, an anion, can enter drinking water through a number of different causes, such as the use of hypochlorite or chlorine dioxide as disinfectants, the oxidation of hypochlorite or chlorite by ozone, and pesticide runoff or paper mill discharges that contaminate the source water.

To know more about chlorate visit:

https://brainly.com/question/5923839

#SPJ4

According to the concept of Avogadro's number and STP conditions volume in liters of the sample is 15,388.7.

Avogadro's number is defined as a proportionality factor which relates number of constituent particles with the amount of substance which is present in the sample.

According to the definitions, Avogadro's number depend on determined value of mass of one atom of those elements.It bridges the gap between macroscopic and microscopic world by relating amount of substance with number of particles.

Number of atoms can be calculated using Avogadro's number as follows: mass/molar mass×Avogadro's number

Number of moles is obtained as, number of atoms/Avogadro's number=4.088×10²⁴/6.023×10²³=6.78 moles on substitution in formula of PV=nRT=V=6.78×8.314×273/1=15,388.7 liters.

Thus, the volume is 15,388.7 liters of the sample.

Learn more about Avogadro's number,here:

https://brainly.com/question/11907018

#SPJ1

Answer:

Mg + Hso4 - Mgso4 + H

24g of magnesium- 120g of Mgso4

Xg. - 6g of Mgso4

Cross multiply

120x - 144

x = 144/120

x= 1.2g

A certain solution contains 4.3 grams of salt per liter. the  salt is there in 11 liters of the solution is 47.3 grams.

The solution contains = 4.3 grams salt per liters

in one liters the solution contains = 4.3 grams of the salt.

the salt in the 11 liters = ?

so, in one liter in contains = 4.3 grams

in 11 liters it will contains = 4.3 × 11

                                         = 47.3 g

the round off answer to the solution is 47.3 g.

Thus the amount of the salt in the 11 Liters of the solution is the 47.3 g.

To learn more about solutions  here

https://brainly.com/question/10432855

#SPJ4

After 4 minutes, 200 g of protactinium-234 would remain.

Protactinium-234 is a radioactive isotope of protactinium. It is a fission product that is produced when uranium atoms undergo fission. It has a half-life of 1.17 minutes and decays via beta-decay to uranium-234. It is the most stable isotope of protactinium and is found in very small quantities in uranium ore. The main uses for protactinium-234 are for research, nuclear medicine and nuclear power. In research, it can be used to study properties of fission products and to measure the efficiency of nuclear reactors. In nuclear medicine, it can be used to detect cancers and other conditions. Finally, it can be used in nuclear power plants to help regulate and control the flow of energy.

To learn more about Protactinium-234
https://brainly.com/question/1391225
#SPJ4

The classical elements or seven elements in nature are plants, warm energy, soil, mineral, water, cold energy, and air.

Living organisms incorporate distinctly massive quantities of oxygen, carbon, hydrogen, nitrogen, and sulfur (those 5 factors are called the majority factors), together with sodium, magnesium, potassium, calcium, chlorine, and phosphorus (those six factors are called microminerals). From the smallest atom to a massive whale to the sun machine itself, all matters are stated to be composed of a few aggregate of those elements. Halogens belong to group 17, and they acquire only one electron in order to attain stable electronic configuration.

To learn more about elements check the link below:

https://brainly.com/question/28376204

#SPJ4

The Kp of the reaction as it has been shown is 2.9 × 10^3 Option A

We know that the equilibrium constant is the constant that has to do with the ease with which the reactants that are in the system can be converted into the products. In this case we have been given the reaction equation as it has been shown in the question.

Let us all now bear in mind that the reaction ghat we have here is a gas phase reaction and since the reaction is a gas phase reaction the equilibrium constanta that has been given as K can also be written in terms of the partial pressures of the gasses that are present in the system and this ius the bed rock of the answer that we woulod give above. The Kp can now be written as a scientific notation as shown above.

Then;

kp = Kc/(RT)^∆n

Kp = equilibrium constant using pressure

Kc = equilibrium constant using concentration

R = gas constant

T = temperature

n= difference in number of moles

Kp = 0.31/(0.082 × 1173)^-2

Kp = 2.9 × 10^3

Learn more about equilibrium constant:https://brainly.com/question/10038290

#SPJ1

The vapor pressure of water at its boiling point 100°C is 1 atm. Then the pressure at 117°C is 1.17 atm and the temperature of water at a pressure of 2.85 atm is 285°C.

Boiling point of a substance is the temperature at which it converts from liquid state to vapor state. At this temperature the vapor pressure of water vapor is equal to the atmospheric pressure that is 1 atm .

The temperature-pressure relation is written as:

P1 /T1 = P2/ T2

Now, the pressure inside the cooker at a temperature of 117°C is calculated as:

(1 atm × 117 °C) / 100 °C = 1.17 atm.

Thus, pressure at 117 °C is 1.17 atm. Then, If the pressure is 2.85 atm, then the temperature of water inside the pressure cooker is calculated as:

(2.85 atm × 117 °C) / 1.17 = 285 °C

Therefore, the temperature at 2.85 atm is 285 °C.

Find more on boiling point:

https://brainly.com/question/2153588

#SPJ1

Answer:

Wind, Rain and Snow

Consequently, winds are stronger at higher elevations. Colder temperatures at higher elevations also create precipitation, because cold air can't hold as much moisture as warm air. Moisture condenses out of the air as snow and ice, and it falls back to the ground.

The factors that affect the weather and climate are latitude, altitude, wind, and distance from the sea.

Climate can be described as the long-term weather pattern in an area, averaged over 30 years. Climate is the mean as well as the variability of meteorological variables over months to millions of years.

Some of the meteorological variables that are used to measure are temperature, atmospheric pressure, humidity, wind, and precipitation. The climate can be defined as the state of the components of the climate system, including the atmosphere, cryosphere, lithosphere, and biosphere, and the interactions between them.

The climate is affected by its latitude, terrain, altitude, land use, and water bodies and their currents. Climates can be classified based on the average and typical variables, most temperature, and precipitation.  It is used in studying of the biological diversity and how climate change affects it.

Learn more about climate, here:

https://brainly.com/question/10440860

#SPJ2

Remove dry chemicals.Remove contaminated clothing or jewelry. Bandage the burn. Rinse again if needed.

the amount of harm to the skin relies upon on how strong the chemical was, how lots of it become at the skin, and how long it become there. Chemical burns, even minor ones, can be very painful. A minor burn may heal inside a few days. however a extra extreme burn might also take weeks or maybe months to heal completely.you need to now not use ice, or even ice-bloodless water, on a burn. extreme cold carried out to a burn can further damage the tissue. to properly cool and clean a burn, remove any apparel that covers it.

To know more about chemicals click here

https://brainly.com/question/26487468

#SPJ4

The formula for standard deviation is: = (V1/C1) + (V2/C2) +... + (Vn/Cn).

Calculating the percent relative standard deviation (RSD) of the measurement will allow us to ascertain the degree of uncertainty in a standard solution created by pipetting 20 mL of a 0.2487 M (stock) solution.

The RSD is determined by multiplying the standard deviation by the mean and then by 100. The formula to determine the standard deviation is: = (V1/C1) + (V2/C2) +... + (Vn/Cn).

Where n is the number of measurements, C is the stock solution's concentration, and V is the volume of solution added.

We are unable to compute the RSD for the given information since you have not provided any information regarding the number of measurements taken.

To know more about relative standard deviation (RSD) visit: https://brainly.com/question/24499671

#SPJ4

The pressure in the container can be calculated using Ideal gas law. The pressure of the gas at the reduced temperature will be 0.17 atm.

Ideal gas law states the relation between volume, pressure, temperature and number of moles of a gas as written below:

PV = nRT.

Where R is the universal gas constant equal to 0.082 L atm/ K mol.

Given , T = 100 K

n = 0.13 moles

V = 6.1 L

Then, P = nRT/ V

The pressure of the gas at 100 K with 0.13 mole is calculated as follows:

P = (0.13 mole × 100 K × 0.082 L atm/ K mol) / 6.1 L = 0.17 atm.

Therefore, the pressure of the gas is 0.17 atm.

Find more on ideal gas law:

https://brainly.com/question/13821925

#SPJ1

The mass of 4.86 × 10²⁴ Au atoms is equal to  1589.6 g.

Avogadro’s number can be used to express the number of entities such as molecules, atoms, ions, electrons, or protons in one mole of any substance.

The value of Avogadro’s constant is equal to 6.022 × 10²³ per mole.

Given, the number of atoms of the Au =  4.86 × 10²⁴

The atomic mass of the Au = 197 g/mol

So 6.022 × 10²³ atoms of Au have mass = 197 g

Then 4.86 × 10²⁴ Au atoms will have mass =  1589.6 g

Learn more about Avogadro's number, here:

brainly.com/question/11907018

#SPJ1

An orbit is a set route along which electrons spin around the nucleus of an atom, whereas an orbital is a region where the chance of finding any electron is calculated.

The electron is a subatomic particle with an initial electric charge of -1. Electrons are the first generation of the lepton particle family and are often regarded as elementary particles due to the lack of known components or substructure. An electron is a negatively charged subatomic particle that can be attached to or released from an atom (not bound). A bound electron is one of the three major kinds of particles within an atom, the other two being protons and neutrons. The nucleus of an atom is made up of electrons, protons, and neutrons.

Here,

An orbit is a fixed path along which electrons spin around an atom's nucleus, whereas an orbital is an area where the probability of finding any electron is determined.

To know about electron,

https://brainly.com/question/12001116

#SPJ4

A binary covalent bond exists between 2 nonmetals.

These compounds are termed similarly to binary ionic compounds even though they don't contain ions.

These guidelines apply to the nomenclature of binary covalent compounds:

The complete name of the first element in the formula is given first.

The name of the second element refers to it as an anion.

Prefixes are employed to indicate the number of atoms in a compound. The prefix mono- is dropped if the first element only has one atom.

For instance, carbon monoxide is the name given to CO rather than monocarbon monoxide.

To look more about covalent bond click here

brainly.com/question/10777799

#SPJ4

Almost all of the oxygen (O2) one consumes in breathing is converted to: b. carbon dioxide (CO2).

When we breathe in oxygen, it is used in cellular respiration, which is the process by which our body converts glucose and oxygen into energy in the form of ATP. In the process, the oxygen is combined with the hydrogen atoms from glucose to form water, and the carbon atoms from glucose are converted to carbon dioxide (CO2) as a waste product. Therefore, almost all of the oxygen that one consumes in breathing is converted to carbon dioxide (CO2).Breathing is the process by which an organism takes in oxygen and expels carbon dioxide. In humans and other mammals, this process is accomplished through the respiratory system, which includes the nose, trachea, bronchi, and lungs. When we inhale, air is drawn into the lungs through the nose or mouth, passing through the trachea and bronchi before reaching the alveoli, which are small air sacs in the lungs where gas exchange occurs.

To learn more about oxygen (O2) here:

https://brainly.com/question/9714175

#SPJ4

Dimensional evaluation makes use of conversion elements to use the unit in an quantity into an equal amount expressed with a exclusive unit.

For example, a conversion aspect might be used to transform meters to centimeters. Dimensional evaluation (additionally referred to as aspect label approach or unit evaluation) is used to transform from one set of gadgets to another. This approach is used for each simple (ft to inches) and complex (g/cm3 to kg/gallon) conversions and makes use of relationships or conversion elements among exclusive units of gadgets. A conversion ratio (or unit aspect) is a ratio same to one. This ratio includes the names of the gadgets for use withinside the conversion. It may be used for conversions in the English and Metric Systems, in addition to for conversions among the systems. The conversion unit is primarily based totally upon the idea of equal values.

To learn more about conversion unit check the link below:

https://brainly.com/question/28036423

#SPJ4

The initial amounts of x and y required to form solid xy are 1 mol of x and 1 mol of y.

The initial amount is the starting point for any financial transaction.

In order to calculate the initial amounts of x and y that will result in the formation of solid xy, the following equation must be used:
nx = ny * (4.1/kp)
where nx and ny are the moles of x and y, respectively, and kp is the equilibrium constant of the reaction.
Given the information provided, we can calculate the moles of x and y:
nx = ny * (4.1/4.1) = ny
ny = (22.4 L * 1 mol/22.4 L) = 1 mol
Therefore, nx = 1 mol and ny = 1 mol.
This means that if the reaction is carried out in a 22.4 L container, the initial amounts of x and y required to form solid xy are 1 mol of x and 1 mol of y.

To learn more about initial amount
https://brainly.com/question/26988374
#SPJ4

If the temperature is raised to 402 K, the pressure (in atm) of this given sample of gas will be 4.5.

Given,

Pressure P1 = 3.4 atm

Temperature T1 = 300 K

       ⇒            T2 = 402 K

   ⇒                P2 = ?

    ⇒          P1/T1 = P2/T2

 ⇒         3.4/300 = P2/402

    ⇒              P2 = 4.5

   ⇒     Pressure = 4.5 atm

An atmosphere (atm) is a measuring unit that corresponds to the average air sea level pressure at 15 degrees Celsius (59 degrees Fahrenheit). One atmosphere consists of 1,013 millibars of pressure, or 760 millimetres (29.92 inches) of mercury.

Pressure is defined as the force exerted by one material on another per unit area. The force also that gas exerts on the container limits is defined as gas pressure. Gas molecules travel at random over the specified volume. They clash with the surface as well as each other during this movement.

To know more about the Pressure, here

https://brainly.com/question/2060803

#SPJ4

There are a few reasons why the demand for ammonia has increased over time:

Hope This Helps You!

For a team of scientists to claim that they have discovered a new experimental method for determining atomic mass, their claim is to be considered valid only if another team of scientists is able to replicate the results of the experiment.

In order for a scientific claim to be considered valid, it is important that the results of the experiment can be replicated by other researchers.

Replication means that other scientists should be able to obtain the same results using the same methods. This helps to ensure that the results are accurate and reliable, rather than being a fluke or an error.

Without the ability to replicate the results, it is difficult to have confidence in the validity of the claim, as it may be due to uncontrolled variables or other factors that cannot be reproduced. Ensuring that results are replicable is an important part of the scientific process and helps to build a strong foundation of knowledge.

Learn more about atomic mass:

https://brainly.com/question/17067547

The group number of the element in the periodic table is equal to 15 as it has five valence electrons. Therefore, .option D is correct.

Valence electrons can be explained as the electrons occupying the outer shell of an atom while the electrons placed in the inner shell are known as core electrons. Lewis structures of the elements can be helpful to calculate valence electrons and know the types of bonds.

Valence electrons can be filled in different shells, causing interaction between atoms and leading to the formation of chemical bonds.

The five elements have five electrons in their valence shell therefore it belongs to nitrogen family. The group number can be calculated as 10 + 5 = 15

Learn more about valence electrons, here:

brainly.com/question/18612412

#SPJ1

The student collected data on the mass of each artificial cell. The student predicted that the cell in the beaker with 25% sugar solution would have the greatest change in mass after 24 hours. The student's prediction would be correct.

The artificial cell placed in the beaker with 25% sugar solution would likely have the greatest change in mass after 24 hours because of osmosis.

Osmosis is the movement of water across a semi-permeable membrane from an area of high water concentration to an area of low water concentration. In this case, the artificial cell has a semi-permeable membrane that allows water to pass through, but not sugar.

The 25% sugar solution in the beaker is less concentrated than the sugar solution inside the artificial cell, so water will move from the beaker into the cell, causing the cell to swell and increase in mass.

On the other hand, the artificial cells in the beakers with 0% and 12.5% sugar solutions will have less of a change in mass as the solution outside of the cell is more concentrated than inside the cell.

Therefore, the correct answer is as given above

learn more about osmosis: https://brainly.com/question/2811191

#SPJ1

In scientific notation, the result of multiplying an integer between 1 and 10 by a power of 10 is written.For instance, 650,000,000 can be represented as 6.5 108 in scientific notation.

Always set the base to 10. The exponent must be an integer that is non-zero, therefore it can either be positive or negative. The absolute value of the coefficient must be less than ten and more than one.

a system of symbols for designating unique items. Example: In mathematics, the symbol "" stands for "infinity." There are many notations in mathematics.

To know more about scientific notation visit:-

https://brainly.com/question/18073768

#SPJ1

The final volume can be determined using Charles's law. The volume of gas at 5 degree Celsius will be 8.3 ml.

According to Charles's law, at constant pressure, the volume of a gas is directly proportional to the temperature.

Hence, V/T = constant.

Let, V1 and T1 be the initial volume and temperature and V2, T2 be the final quantities.

then, V1/T1 = V2/T2.

V2 = V1 T2/ T1

Given, V1 = 50 ml

T1 = 30 °C

T2 = 5 °C

Then, V2 = 50 ml × 5 °C /30 °C = 8.3 ml

Therefore, the volume of the gas reduces to 8.3 ml.

Find more on Charles's law:

https://brainly.com/question/16927784

#SPJ1

2K + [tex]Cl_{2}[/tex] = 2KCl is the balanced net ionic equation for a redox reaction that results in the formation of potassium chloride.

Chlorine gas, Cl 2, will cause potassium metal, K, to burn, forming potassium chloride, KCl, an ionic molecule. This synthesis reaction is described by the following balanced chemical equation.

2K + [tex]Cl_{2}[/tex] = 2KCl

Consider this reaction to be a redox reaction as an alternative mental image. Here, chlorine gas is oxidizing potassium metal to produce potassium cations. Chlorine gas is converted into chloride anions during the process. The subsequent reaction between the potassium actions and the chloride anions will result in potassium chloride.

Learn more about Redox Reaction

brainly.com/question/13293425

#SPJ4

According to the question,16.2 kPa is equal to 0.16 atmospheres.

What is the atmospheres?

The atmosphere is the thin layer of gases and particles that surrounds Earth, protecting us from the sun’s harmful radiation and maintaining the planet’s temperature. It is composed of 78% nitrogen, 21% oxygen, 0.9% argon, 0.03% carbon dioxide, and trace amounts of other gases, as well as water vapour, dust, and other particles. The atmosphere works by trapping heat from the sun, allowing temperatures to remain relatively stable throughout the world. It also helps regulate the water cycle, ensuring that water remains available for life on Earth. The atmosphere also helps protect us from environmental hazards like ozone depletion and acid rain. In addition, it is home to many species of birds, insects, and other animals. Without the atmosphere, Earth would be a barren, lifeless planet.

To learn more about atmospheres visit:

https://brainly.com/question/28310375

#SPJ1

Answer:

30.5%

Explanation: