a chemist determined by measurements that 0.015 moles of tungsten participated in a chemical reaction. Calculate the mass of tungsten that participated in the chemical reaction.

Answer: NaOH and Ca(OH)2 are bases. HCl and H2SO4 are acids

Explanation:

i dont know I hope someone knows soon take care

According to molar concentration, 100 ml of 10 M solution is needed to make 1 liter of a 1 M solution.

Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.

The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.

In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.In case of two solutions, molar concentration is found out by, M₁V₁=M₂V₂.

On substitution in above formula, V₁=1×1/10=0.1 L=100 ml.

Thus, 100 ml  of a 10 M solution is needed to make 1 liter of a 1 M solution.

Learn more about molar concentration,here:

https://brainly.com/question/21841645

#SPJ2

Answer:

D

Explanation:

Answer:

88 grams CO2

Explanation:

Convert from grams to moles to mole ratio to grams again

32 g CH4 * 1 mol CH4/16 g CH4 * 1 mol CO2/1 mol CH4 * 44 grams CO2 = 88 grams CO2

Lemme know if u need more explanation!

Answer:

For O: atomic number = 8 # neutrons = 8

For Al: atomic mass = 27, # electrons = 13

Answer: b

Explanation: alpha decay or particle consist of two protons and two neutrons hence it is a helium nucleus.

An alpha particle [tex]\binom {4} {2}[/tex]He is produced in alpha decay reactions, while the parent nucleus' atomic number and mass number drop by 2 and 4 correspondingly.

Therefore, the final answer is "Option B".

Find out more about the alpha decay here:

brainly.com/question/14081292

Answer:

Surface currents in the ocean are driven by global wind systems that are fueled by energy from the sun. Patterns of surface currents are determined by wind direction, Coriolis forces from the Earth's rotation, and the position of landforms that interact with the currents

Answer:

B

Explanation:

(Usually give an explanation, but doing an exam, so just trust)

Answer:

Do you mean acids?

Due to chemical reaction

Explanation:

Acids are only stored in glass containers because glass containers rarely react with any substance.They dont react with acids and prevent chemical reaction so the acids can be kept. If acids were kept in metal containers it would react .

Answer:

Explanation:

Completely turn off equipment like televisions and stereos when you're not using them.

Choose energy-efficient appliances and light bulbs.

Save water.  

Lower your shades or close your curtains on hot days, to keep the house cool and reduce the use of electric fans or air-conditioning.

Let clothes dry naturally.

Keep lids on pans when cooking to conserve energy.

Use rechargeable batteries.

Don’t use “throw away” products like paper plates and napkins, or plastic knives, forks and cups.

Send electronic greetings over email, instead of paper cards.

Answer:

The three methods used to treat water are

Explanation:

These methods used include physical processes, biological processes such as slow sand filters or biologically active carbon; chemical processes such as flocculation and chlorination; and the use of electromagnetic radiation such as ultraviolet light.

Answer:

here's the answer hope it helps

Explanation:

Souring of milk

Baking of cake

Answer: Answer is in the Explanation.

Explanation: At noon the sun is directly above in the sky, the sun's rays are falling on the body making the shadow smaller. While in the evenings and mornings the sun is at a inclined position, so the sun's rays are falling at a inclined position making the body's shadow larger.  

I looked it up on the internet and reworded it as good as I could.

i) KMnO4

lets calculate using x method

1+x+ 4(-2) = 0

1+x-8 =0

x= 7

ii)MnO4‐

x+4(-2) = -1

x-8 = -1

x = 7

Answer:

C. So electrons can flow from one electrode to another

Explanation:

An electrochemical cell is any cell in which electricity is produced by reason of a chemical change.

An electrochemical cell consists of two electrodes, these two electrodes are connected using a wire.

Usually, electrons flow from one electrode to another via this wire thereby enabling the electrochemical processes of oxidation and reduction in the cell to proceed effectively.

Answer:

0.5 M

Explanation:

Molarity = moles of solute / liters of solution

Answer:

pH = 14 - pOH

pH = -log[H+]

pH = pKa + log [A-]/[HA]

Explanation:

The equation used depends on what is given in the equation.

The expression that represent the pH of the solution is

pH = 14 - pOH

pH = -log[H+]

pH = pKa + log [A-]/[HA]

It is the quantitative measure related to the acidity or the other liquid solutions. It should be range between the 1 and 10^-14. here the numbers be like from 0 to 14.

Hence, we can say that The expression that represent the pH of the solution is

pH = 14 - pOH

pH = -log[H+]

pH = pKa + log [A-]/[HA]

Learn more about pH here: https://brainly.com/question/12052751

Answer:

:)

Explanation:

If we subtract the atomic number from the atomic mass: atomic mass - atomic number = number of protons + number of neutrons - number of protons. Thus we get the number of neutrons present in an atom when we subtract the atomic number from the atomic mass.

Answer:

.0016

Explanation:

For specific heat problems you use the formula :

Q = mcΔT

They've given you the m, c and delta T, so you can plug in those values. (for the temperature change subtract 10 from 40 to see that it grew 30 degrees)

You're looking for Q so leave that variable in the equation. Then solve.

.Q = (8.00)(.384)(30)

Q = 92.16

92.16 J energy will be absorbed by a copper sample.

Given:

Specific heat  capacity, C= 0.384 J/g °C

Temperature, T₁ = 10.0°C and T₂= 40.0°C

Mass, m=8.00 g

We know that,

The specific heat capacity is defined as the quantity of heat (J) absorbed per unit mass (g) of the material when its temperature increases or 1 °C, and its unit is J/g °C.

Heat energy in terms of specific heat energy can be calculated by using this formula:

Q= m. C. ΔT

∵ΔT= change in temperature,

ΔT=40.0-10.0°C=30°C

Now substituting the values in the above formula.

[tex]Q= 8.0*0.384*30=92.16J[/tex]

Hence, 92.16 J energy will be absorbed by a copper sample.

Learn more:

brainly.com/question/22991121

Answer:

when you have a fever your body is trying to fight off a virus or some other kind of bad Bacteria  

Explanation:

I think this because everyone has at least had a fever when they were sick and when you are sick you are likely to have a fever because your body is fighting off a bad bacteria  

Answer:

I believe its compaction

Explanation:

Compaction is how sedimentary rock is formedm

Answer:

243L of SO2

Explanation:

You'll want to use the Ideal Gas Law for this problem.

First, determine your formula. V=nRT/P

Next, determine your factors.

V = ?

n = 847g

R = 0.0821L.atm/mol.k

T = 313k (40+273)

P = 89.4kPa

Now just plug it in!

847g x 313k / 89.4kPa  x  0.0821L.atm / mol. K

243L of SO2. Hope this helps!

Answer:

distance traveled divided by the time it traveled

Explanation

this is just an equation for how to find speed. you can also just use like a meterstick and a stopwatch