a An object is tarown up with a velocity v = 6.02 +7.0j. Calculate the (1) time taken reach the maximum height (ii) the horizontal range (s = 10m/s2). ​

Answers

Answer 1

Answer:

(i) 0.6s (ii) 8.42m

Explanation:

U² = 6.02² + 7²

U = 9.23

angle of projection

tanø = 6.02/7

ø = 40.7

Time of fligt

t = Usinø/g

t = 9.23 sin 40.7/10

t = 0.6

H range = U²sin2ø/g

H = 9.23²sin 81.4/10

H = 8.42m

Answer 2

The time taken reach the maximum height is 0.6s and the horizontal range is 8.42m.

What is Velocity?

Velocity ​​is defined as the directional motion of an object which is indicated by the rate of change of position as observed from a particular frame of reference. It is measured by a particular standard of time. It is a vector quantity as it has both magnitude and direction.

It can be expressed as:

v= d/t

Where. v is the velocity in m/s

d is the displacement measured in meter 'm'

t is the time measured in seconds 's'

For above given information,

v = 6.02 +7.0j, so the initial velocity will be u

u² = 6.02² + 7²

u = 9.23m/s

Angle of projection, tanø = 6.02/7

ø = 40.7

Time taken=  t = u sinø/g

t = 9.23 sin 40.7/10

t = 0.6s

Horizontal range  = u²sin2ø/g

H = 9.23²sin 81.4/10

H = 8.42m

Thus, the time taken reach the maximum height is 0.6s and the horizontal range is 8.42m.

Learn more about Velocity, here:

https://brainly.com/question/11679227

#SPJ2


Related Questions

The passage of a wave through a medium is...?

Answers

Answer:

Transmission

Explanation:

It’s the passage of electromagnetic waves through a medium.

The passage of a wave through a medium is known as transmission.

What is the transmission of a wave?

The transmission of waves may be characterized as a wave traveling through a medium or into a new medium. Not all waves transmit through the same materials. It significantly depends on the type of wave, the type of material, and even the frequency of the wave.

Transmission is generally the passage of electromagnetic radiation through a medium. While Reflection is the process by which electromagnetic radiation is returned either at the boundary between two media (surface reflection) or at the interior of a medium (volume reflection).

Waves can go through things. Waves go through water, light can pass through the glass, and sound can pass through walls. The material the wave passes through is called a medium. A single disturbance passing through a medium is called a pulse.

Therefore, the passage of a wave through a medium is known as transmission.

To learn more about the Transmission of the wave, refer to the link:

https://brainly.com/question/27844842

#SPJ6

who the football games yesterday 2021

Answers

New England am I wrong I didn’t watch the game

2. If a vehicle with four wheels is traveling in a linear path through soft dirt, how many and which tires would you expect to leave tire track impressions

Answers

Given our understanding of the situation, for this vehicle with four wheels is traveling in a linear path through soft dirt, we would expect for only two wheels to leave tire track impressions.

The vehicle has four wheels, and one might think initially that it makes sense for all four wheels to create tire track impressions on the dirt. This assessment is correct, all four tires will create impressions, However, not all four tires will leave a said impression.

This is due to the fact that as the vehicle advances, the tires in the back will erase the impressions left by the front tires. Therefore, only two tire track impressions will be left.

To learn more visit:

https://brainly.com/question/14443145?referrer=searchResults

Question 2 (4 points)
Listen
A 14,000kg freight train, coasting at 8.1m/s, strikes another car, and the two move
forward together at 3.6m/s.
What is the mass of the second car?
Paragraph
B
1
U
A
+

Answers

Answer:

Explanation:

I will ASSUME that the struck car was initially at rest. Would not have to be, but a different mass will result if it was

Conservation of momentum

14000(8.1) + m(0) = (14000 + m)(3.6)

14000(8.1) = 14000(3.6) + m(3.6)

m = 14000(8.1 - 3.6) / 3.6

m = 17500 kg

The mass of the second car is 17500 kg.

What is law of conservation of momentum?

The law of conservation of momentum asserts that, unless an external force is applied, the total momentum of two or more bodies operating upon one another in an isolated system remains constant. As a result, momentum cannot be gained or lost.

Newton's third law of motion has a direct impact on the idea of momentum conservation.

mass of the first car = 14000 kg.

Initial speed of first car = 8.1 m/s.

Final speed of the two cars = 3.6 m/s.

From law of conservation of momentum; we can write:

Total initial momentum = total final momentum

14000 kg ×8.1 m/s + m×0 = (14000 + m) kg × (3.6 m/s)

14000(8.1) = 14000(3.6) + m(3.6)

m = 14000(8.1 - 3.6) / 3.6

m = 17500 kg

Hence, the mass of the second car is 17500 kg.

Learn more about momentum here:

https://brainly.com/question/24030570

#SPJ2


The axis of the earth is
Tilted about 23.5 degrees
Vertical
Vertical

Answers

Answer:

The axis of rotation of the Earth is tilted at an angle of 23.5 degrees away from vertical, perpendicular to the plane of our planet's orbit around the sun. The tilt of the Earth's axis is important, in that it governs the warming strength of the sun's energy.

Explanation:

can i get brainliest

Two parallel plates, separated by 0.20 m, are connected to a 12-V battery. An electron released from rest at a location 0.10 m from the negative plate. When the electron arrives at a distance 0.050 m from the positive plate, what is the potential difference between the initial and final points

Answers

The potential difference between the initial and final point is 3.0 V.

The given parameters:

distance between the plates, d = 0.2 mvoltage across the plates, V = 12 Vposition of the electron from negative plate, x₁ = 0.1 mposition of the electron from the positive plate, x₂ = 0.0 5m

The potential difference between the initial and final point is calculated as follows;

[tex]E = \frac{V}{d} \\\\\frac{V_1}{d_1} = \frac{V_2}{d_2}[/tex]

where:

[tex]d_2[/tex] is the distance of the electron between the positive and negative plate

[tex]0.1 + d_2 + 0.05 = 0.2\\\\d_2 + 0.15 = 0.2\\\\d_2 = 0.2 - 0.15\\\\d_2 = 0.05 \ m[/tex]

[tex]V_2 = \frac{V_1d_2}{d_1} \\\\V_2 = \frac{12 \times 0.05}{0.2} \\\\V_2 = 3.0 \ V[/tex]

Thus, the potential difference between the initial and final point is 3.0 V.

Learn more here:https://brainly.com/question/1494836

Define critical angle

Answers

Answer:

Critical angle is a angle of incidence, for which refraction is 90 degree, this is a least angle of incidence at which total reflection takes place, please mark me Brainliest

Two point particles, with masses m and 2 m, are separated by some distance Lin an uniform gravitational field. The center of gravity of this two particle system is:________
А. located L/2 distance away from either mass and on the line joining the two particles.
B. located 1/3 distance away from 2 m and on the line joining the two particles.
C. located L/4 distance away from 2 m and on the line joining the two particles.
D. located L/3 distance away from mand on the line joining the two particles.
E. located L/4 distance away from m and on the line joining the two particles.
F. located where the mass 2 m is located.

Answers

The center of gravity of this two particle system is located 1/3 distance away from 2 m and on the line joining the two particles.

The given parameters:

Mass of the first particle, = mMass of the second particle, = 2mDistance between the two particles, = L

The center of gravity of the two particles when first particle is fixed is calculated as;

[tex]C_G = \frac{m(0 ) \ +2m(L) }{m+ 2m} \\\\C_G = \frac{2mL}{3m} \\\\C_G = \frac{2L}{3}[/tex]

The center of gravity of the two particles when second particle is fixed is calculated as;

[tex]C_G = \frac{m(L) \ + \ 2m(0)}{m + 2m} \\\\C_G = \frac{mL}{3m} \\\\C_G = \frac{L}{3}[/tex]

Thus, the center of gravity of this two particle system is located 1/3 distance away from 2 m and on the line joining the two particles.

Learn more about center of gravity here: https://brainly.com/question/874205

Another nervous papa bear paces at 1.0 m/s north for 3.0 s, then at 1.6 m/s south for 5.0 s, and then
at 1.4 m/s north for 4.0 s. The average speed of this bear is:

a) 1.3 m/s
b) 1.4 m/s
c) 4.0 m/s
d) 8.0 m/s

Answers

Answer:

Explanation:

Average speed is total distance traveled over the time needed to do so.

d = vt

v = (1.0(3.0) + 1.6(5.0) + 1.4(4.0) / (3.0 + 5.0 + 4.0)

v = 16.6 / 12

v = 1.383333333...

v = 1.4 m/s

Although genes contribute to whatever IQ scores measure, IQ can change radically due to changes in the __________.

Answers

Answer: Even though the genetic susceptibility plays a crucial role on the IQ of the individual, various modifiable environmental factors like education, premature birth, nutrition, pollution, drug and alcohol abuse, mental illnesses, and diseases can have an influence on an individual's IQ.

a=100m/s2
Vi=10m/s
T=10sec
Vf?

Answers

Answer:

v=u+at

v= 10+100×10

v = 10+1000

v = 1010 m/s

Eric drops a 2.20 kg water balloon that falls a distance of 45.08 m off the top of a
building. What is the kinetic energy at the bottom?

Answers

Answer:

972 J

Explanation:

At the bottom, all the gravitational potential energy was converted into kinetic energy. If you calculate the GPE, its value will be the same that the KE at the bottom. The GPE can be calculated this way:

GPE = mass×gravity×heigth

GPE = 2.2×9.8×45.08 ≈ 972

At a construction site, a 68.0 kg bucket of concrete hangs from a light (but strong) cable that passes over a light friction-free pulley and is connected to an 85.0 kg box on a horizontal roof (see the figure (Figure 1)). The cable pulls horizontally on the box, and a 46.0 kg bag of gravel rests on top of the box. The coefficients of friction between the box and roof are shown. The system is not moving.

Answers

Following are the calculation to the friction force:

Please see the diagram below for an illustration of the forces acting on objects.Therefore, m denotes the mass of a gravel bag, and M denotes the overall mass of the box.Whenever the system is stationary, the friction force on the box equals the tension in the string.

The substring tension force is provided as follows:  

[tex]\to T-m_{1}g=0 \\\\\to T = m_{1}g \\\\[/tex]

       [tex]= (68\ kg) (9.81 \ \frac{m}{s^2} ) (\frac{ 1\ N}{ 1\ kg \cdot \frac{m}{s^2}}) \\\\ = (68 ) (9.81 ) ( 1\ N) \\\\= 667.08\ N \\\\[/tex]

Therefore, the friction force on the box is "667 N".

Learn more:

brainly.com/question/2285391

To become a healthy individual, a person must have a properly executed routine to achieve his/her fitness goals. On the contrary, in what instance does a person become unhealthy

Answers

unhealthy meals & skipping workouts

An applied force accelerates a 4.00 kg block to an initial velocity of 11 m/s across a rough horizontal surface, in the positive x direction. As the block reaches 11 m/s, the applied force is removed. The block then slows to 1.5 m/s at a distance of 4.00 m beyond where the applied force was removed. Determine the magnitude and the direction of the non-conservative force acting on the box as it slides.

Answers

The only force opposing the block's sliding as it slows down is friction with magnitude f . By Newton's second law, the net force in this direction is

F = -f = ma = (4.00 kg) a

Assuming constant acceleration a , the acceleration applied by friction is such that

(1.5 m/s)² - (11 m/s)² = 2a (4.00 m)

Solve for the acceleration :

a = ((1.5 m/s)² - (11 m/s)²) / (8.00 m) ≈ -14.8 m/s²

Then the frictional force exerted a magnitude of

-f = (4.00 kg) (-14.8 m/s²)

f59.4 N

and was directed opposite the block's motion.

Some amount of ideal gas with internal energy U was heated from 100^0C to 200^0C. We can predict that internal energy after heating in terms of U is:

Answers

The internal energy after heating in terms of U is 100U.

The given parameters;

initial temperature of the gas, T₁ = 100 ⁰Cfinal temperature of the gas, T₂ = 200 ⁰C

Assuming a constant pressure, the internal energy of the ideal gas is equal to the change in the enthalpy of the ideal gas.

[tex]\Delta H = U \times \Delta T\\\\\Delta H = U (200 - 100)\\\\\Delta H = 100 U[/tex]

Thus, we can conclude that the internal energy after heating in terms of U is 100U.

Learn more here:https://brainly.com/question/15517750

7. A 1.00 kg mass is connected to a spring with a spring constant of 9.00 N/m. If the initial velocity is 4.00 cm/s and the initial displacement is 0.00 cm, then A) what is the maximum spring potential energy of the simple harmonic motion

Answers

At the equilibrium position of the spring, the mass has kinetic energy

1/2 (1.00 kg) (0.0400 m/s)² = 0.000800 J = 0.800 mJ = 800 µJ

and when the spring is maximally compressed, this kinetic energy is converted into potential energy.

The maximum spring potential energy of the simple harmonic motion is approximately 7.48 millijoules.

To find the maximum spring potential energy (Us) in simple harmonic motion, we need to determine the maximum displacement (A) of the mass from its equilibrium position.

In simple harmonic motion, the maximum displacement is equal to the amplitude of the oscillation.

The formula for maximum displacement (A) is given by:

A = v0 / ω

where v0 is the initial velocity (4.00 cm/s) and ω is the angular frequency of the oscillation.

The angular frequency (ω) is given by:

ω =[tex]\sqrt{(k / m)[/tex]

where k is the spring constant (9.00 N/m) and m is the mass (1.00 kg).

Substitute the values:

ω = [tex]\sqrt{(9.00 N/m / 1.00 kg)} = \sqrt{9.00 rad/s[/tex] ≈ 3.00 rad/s

Now, calculate the maximum displacement:

A = 4.00 cm/s / 3.00 rad/s ≈ 1.33 cm

Next, calculate the maximum spring potential energy:

Us =[tex](1/2) * k * A^2[/tex]

Us = (1/2) * 9.00 N/m * [tex](1.33 cm)^2[/tex]≈ 7.48 mJ

To know more about spring potential energy, here

brainly.com/question/29510087

#SPJ2

--The compleete Question is,  A 1.00 kg mass is connected to a spring with a spring constant of 9.00 N/m. If the initial velocity is 4.00 cm/s and the initial displacement is 0.00 cm, then what is the maximum spring potential energy of the simple harmonic motion--

Four year old Sam has been hitting other children at preschool. He may have learned this behavior from his parents who regularly spank him. What approach to personality best explains Sam's behavior?
A. psychodynamic
B. behavioral
C. humanistic
D. biological

Answers

A. psychodynamic is the personality best explains Sam's behavior

What is psychodynamic ?

The psychology of mental or emotional forces or processes developing especially in early childhood and their effects on behavior and mental states is called psychodynamic .

Since , any behavior  is not genetical or it never get inherited hence it is not biological . This has been  grown with time and this behavior have been grown in Sam by observing his parents doing the same hence correct option should be A. psychodynamic

learn more about psychodynamic

https://brainly.com/question/10373312?referrer=searchResults

#SPJ2

a. Block on a smooth incline.
A block of mass m= 3.8 kg on a smooth inclined plane of angle 36° is connected by a cord over a small frictionless
pulley to a second block of mass m2 = 3 kg hanging vertically. Take the positive direction up the incline and use 9.81 m/s2
for g.
What is the acceleration of each block to 1 decimal place?

Answers

Answer:

Explanation:

F = ma

3(9.81) - 3.8(9.81sin36) = (3 + 3.8)a

a = 1.10566...

a = 1.1 m/s²

the 3.8 kg mass will move up slope and the 3 kg mass will fall at that acceleration.

50 points please help ASAP! !

What is the average velocity of an object that moves from 6 meter to 2 meter relative to origin in 2 second?

Answers

Total Displacement=6-2=4mTime=2s

[tex]\\ \rm\rightarrowtail Avg\: velocity=\dfrac{Total\: Displacement }{Total\: time}[/tex]

[tex]\\ \rm\rightarrowtail Avg\: velocity=\dfrac{4}{2}=2m/s[/tex]

Find the work done by the force field F in moving an object from A to B. F(x, y) = 6y3/2i + 9x y j A(1, 1), B(3, 4)

Answers

Answer:

138

Explanation:

(since there's a blank next to "9x y j", I'm assuming the y of F(x, y) is 9x[tex]\sqrt{y}[/tex] j)

1) find the partial derivative of each:

[tex](6y^{\frac{3}{2} })i + (9x\sqrt{y} )j[/tex]  

 [tex]f_{x} =(6y^{\frac{3}{2} })_{x} = \int\limits{6y^{\frac{3}{2} }} \, dx = 6xy^{\frac{3}{2} } +c \\\\f_{y} = (9x\sqrt{y} )_{y} = \int\limits{9xy^{\frac{1}{2} } } \, dy = 9x(\frac{2}{3} )y^{\frac{3}{2} } +c = 6xy^{\frac{3}{2} } +c[/tex]

2) use partial integrals to make gradient of f:

take whatever you got from partial integral and add them together (if they repeat, just use it once)

[tex]F =[/tex] Vf (V = gradient of)

[tex]F(x, y) = 6xy^{\frac{3}{2} }[/tex]

3) Evaluate the integrals with given points:

Integral of F dotted with dr = F(point B) - F(point A) = F(3, 4) - F(1, 1)

[tex]F(point B) = 6(3)(4)^{\frac{3}{2} }\\F(Point A) = 6(1)(1)^{\frac{3}{2}}\\F(point B) - F(pointA) = 6(3)(4)^{\frac{3}{2} }-(6(1)(1)^{\frac{3}{2}})[/tex]

= 144 - 6 = 138 units of work

Work done by the force field F in moving an object from A to B = 138 J

Given data :

Force field F(x,y) = [tex]6y^{\frac{3}{2} }i + (9x\sqrt{y} ) j[/tex]  

Step 1 : determine the partial derivatives of the vector quantity

Fx = ∫ [tex]6y^{\frac{3}{2} }i = 6xy^{\frac{3}{2} } + c[/tex]

Fy = ∫ [tex](9x \sqrt{y})_{y} = 9x(\frac{2}{3})y^{\frac{3}{2} } + c[/tex]

Equating the partial derivatives :  

[tex]9x(\frac{2}{3})y^{\frac{3}{2} } + c[/tex]  = [tex]6xy^{\frac{3}{2} } + c[/tex]

therefore the gradient of F  i.e. F = vF  = F( x,y ) = [tex]6xy^{\frac{3}{2} }[/tex]

Next step : Determine the work done

Work done ( F.dr ) = [ F(point b ) = F( 3,4 ) ]  - [ F(point A) = F( 1,1 ) ]

F(3,4 ) = 6(3)(4)[tex]^{\frac{3}{2} }[/tex]  = 144

F( 1,1 )  = 6(1)(1)[tex]^{\frac{3}{2} }[/tex]    = 6

Therefore the work done by the force field = 144 - 6 = 138 J

Hence we can conclude that the work done by the force field F is = 138 J

Learn more about work done : https://brainly.com/question/21854305

A 27 kg chair initially at rest on a horizontal
floor requires a 173 N horizontal force to set
it in motion. Once the chair is in motion, a
148 N horizontal force keeps it moving at a
constant velocity.
The acceleration of gravity is 9.81 m/s.
a) What is the coefficient of static friction
between the chair and the floor?

Answers

Answer:

4653

4565445655687568677667876

What is 1 radian approximately in degrees?

Answers

Answer:

180 LUV:)

Explanation:

If it takes 50.0 seconds to lift 10.0 Newtons of books to a height of 7.0
meters, calculate the power required to lift it?

Answers

Work of the force = 10 N

Time required for the work = 50 sec

Height = 7 m

We are given with the value of work and time in the question.

Substitute the values in the formula of power and then you'll get the power required.

We know that,

w = Work

p = Power

t = Time

By the formula,

Given that,
Work (w) = 7 m = 70 Joules
Time (t) = 50 sec
Substituting their values,

p = 70/50

p = 1.4 watts

Therefore, the power required is 1.4 watts.

Hope it helps!

A camera takes a properly exposed photo at f/5.6 and 1/250 s. What shutter speed should be used if the lens is changed to f/4.0?

a.1/65 s
b.1/125 s
c.1/250 s
d.1/500 s
e.1/1000 s

Answers

The shutter speed that should be used if the lens is changed to f/4.0 is; Choice D: 1/500 s.

The relationship between the shutter speed and the focal ratio is an inverse relationship.

Ratio of Areas = 5.6²/4²

A1/A2 = 1.96 = 2

Since; T1A1 = T2A2

T2 = T1(A1/A2)

T2 = 250 × 2 = 500 seconds

In essence; when the focal ratio is reduced as in this case; from f/5.6 to f/4.0; the shutter speed is increased.

Ultimately, the shutter speed of the camera in discuss increases to; 1/500 s.

Read more:

https://brainly.com/question/13083614

builder places a 3kg hammer on the top of a ladder, which is 4m above the ground. Calculate the gravitational potential energy of the hammer while on the ladder.

Answers

Answer:

[tex]E=mgh[/tex]

[tex]m=3kg[/tex]

[tex]h=4m[/tex]

[tex]g=9.8m/s^{2}[/tex]

[tex]E= 3*4*9.8=117.6J[/tex]

Explanation:

Only substitute amounts to formula.

Hope this helps ;)

Cheers :D

At what speed must the electron revolve round the nucleus of
the hydrogen in its ground state in order that it may not be pulled into the
nucleus by electrostatic attraction

Answers

Explanation:

I think this is it, give it a try

A racecar can be slowed with a constant acceleration of -14 m/s2. If the car is going 75 m/s, how many meters will take to stop?​

Answers

Answer:

Explanation:

v² = u² + 2as

s = (v² - u²)/2a

s = (0² - 75²) / (2(-14))

s = 200.8928

s = 200 m

Answer:

Identification

Explanation:

:-;..........

the wheel of bicycle has a radius of 25cm. what will be the magnitudes of the angular displacement in radian and revolution respectively, when the wheel has rolled a distance of 350cm on straight level road?​

Answers

Answer:

Explanation:

350 cm / 25 cm = 14 radians

14 rad / 2π rad/rev = 2.23 revolutions

How does climate change?

Answers

Answer:

Con el cielo del agua

Explanation:

espero que te ayude

(wheather cycle)

hope it helps
Other Questions
que es la anticipacin 4|x-8|+1>_5 ASAP please Young adults from __________ families are more confident listeners and more intellectually flexible than those from __________ backgrounds. what is the name of something that starts with N and ends with G Oxygen is consumed in the mitochondria during oxidative phosphorylation. What is the fate if this oxygen A childs ladder is made of 2 sections. Each section is 3/4 meters. How long is the ladder when all 2 sections are extended to makeone ladder? what's the resolution in rules of the game by amy tan Refer to the Newsela article "How You Can Make a Solar Oven To Cook with a Pizza Box."What is the author's purpose in including a recipe for s'mores?to convince readers of healthier eating habitsto persuade readers to try their ovensto describe the ingredients for a s'moreto explain how to eat s'mores Dr. Smyth conducts research that examines how stress, disease, and disorders can impact individuals in the workplace. She is working in the area of ________ psychology. If for evry 15 there is 25 what is the number for just 5 which part of a modern firearm has the same function There are holes in a freshly baked cake because of:methane.carbon dioxide.yeast.potassium sulfide. can someone help me peaseeeee Need help, will give Brainliest to right answer. Yeast is added to bread dough because the gas released during respiration makes air pockets and give the bread a fluffy texture. Your friend tries to make bread using yeast, flour, water, and salt. The bread comes out flat. What ingredient is missing? Even though it is often the case that no cash outflows result when demand exceeds capacity, __________ can nevertheless be experienced in those circumstances. Multiple Choice holding costs service costs foreorder costs shortage costs setup costs surely helppppp Im stuck its just one question i need help with. Ill brainlist you!! 1) How have advances in technology, combined with scientific understanding of the functioning of the body systems assisted in developing treatment, cure or prevention for the mumps disease. Simplify 3 (x - 5) by distributing. What diameter telescope is needed to resolve the separation between an Earth-like planet and its star at 550 nm if the linear separation between them is 1 AU and the star system is 3 pc from Earth PLEASEEE HELPPPP!!!! PLSSSS!!!!All of the following can increase blood pressure except for D. parasympathetic nervous stimulatonB. sympathetic nervous stimulatonA. reduction in arteriole diameterC. angiotensin II which perspectives on motivation are concerned with the thought progression that leads to people deciding how to act?