a 647 μf capacitor is discharged through a resistor, whereby its potential difference decreases from its initial value of 83.5 v to 23.9 v in 4.73 s. find the resistance of the resistor in kilohms.

The displacement of the object from 0 to 3 seconds is 1 unit, and the distance traveled over the same time interval is also 1 unit.

To find the displacement, we need to find the change in the position of the object over the given time interval. We can do this by taking the integral of the velocity function, v(t), over the interval [0, 3].

[tex]∫(2t - 4)dt = t^2 - 4t + C[/tex]
Evaluate the integral at the upper and lower limits:

[tex][t^2 - 4t]3 - [t^2 - 4t]0 = (3)^2 - 4(3) - [(0)^2 - 4(0)][/tex]

= 1

Therefore, the displacement from 0 to 3 is 1 unit.

To find the distance traveled, we need to take the absolute value of the displacement:

|1| = 1

So the distance traveled from 0 to 3 is also 1 unit.

learn more about time interval here:

https://brainly.com/question/28238258

#SPJ11

The experimental variable that is directly monitored during the hydrolysis of crystal violet is the change in the color intensity of the crystal violet solution.

It is the change in the color intensity of the crystal violet solution as the hydrolysis reaction causes the dye to break down and lose its characteristic purple color. This change in color is typically measured using a spectrophotometer, which can quantify the amount of light absorbed by the solution at a specific wavelength.

Therefore, the hydrolysis rate of crystal violet can be tracked by monitoring the decrease in absorbance of the solution over time.

Learn more about "hydrolysis": https://brainly.com/question/11461355

#SPJ11

For the given transfer function P(s) = 10 / [s(s+2)(s+5)] with a proportional feedback controller C(s) = Kp and unity feedback, there are 3 RL asymptotes in the root locus (RL) construction.

Determine the open-loop poles and zeros
Poles: Set the denominator of P(s) equal to zero and solve for s.
s(s+2)(s+5) = 0
The poles are s = 0, s = -2, and s = -5.  

Calculate the number of RL asymptotes
The number of RL asymptotes is given by the difference between the number of open-loop poles and open-loop zeros.
Since there are no zeros in P(s), there are 3 poles - 0 zeros = 3 RL asymptotes.
In conclusion, for the given transfer function P(s) = 10 / [s(s+2)(s+5)] with a proportional feedback controller C(s) = Kp and unity feedback, there are 3 RL asymptotes in the root locus (RL) construction.

Learn more about RL asymptotes here: https://brainly.com/question/30197395

#SPJ11

At the stagnation point, the coefficient of pressure (Cp) is equal to 1.

The given equation for the coefficient of pressure (Cp) is,
Cp = (p - p∞) / (0.5 * ρ * U∞^2)

where p is the local static pressure, p∞ is the freestream static pressure, ρ is the density, and U∞ is the freestream velocity magnitude.

To express Cp as a function of flow velocities only, we can use Bernoulli's equation for incompressible and inviscid flow,
p + 0.5 * ρ * u^2 = p∞ + 0.5 * ρ * U∞^2

Now, we can rearrange this equation to solve for (p - p∞),
p - p∞ = 0.5 * ρ * (U∞^2 - u^2)

Substitute this into the Cp equation,
Cp = (0.5 * ρ * (U∞^2 - u^2)) / (0.5 * ρ * U∞^2)

Simplify the equation,
Cp = (U∞^2 - u^2) / U∞^2

To find Cp at the stagnation point, we know that the local flow velocity (u) is zero,
Cp_stagnation = (U∞^2 - 0^2) / U∞^2
Cp_stagnation = 1

Therefore, the coefficient of pressure (Cp) at the stagnation point is 1.

Learn more about "Coefficient of pressure": https://brainly.com/question/15104119

#SPJ11

A- the value of r1 is 2.01 m. B- the gravitational field at a distance of 4r1 is 0.875 m/s².

Given: Gravitational field at distance r1 = 13.4 m/s²

Gravitational field at distance r2 = 7.00 m/s²

Distance r2 = 3.90 m

(a) To find the value of r1:

Using the formula for gravitational field strength:

g = G * (m/r²)

where g is the gravitational field strength, G is the gravitational constant, m is the mass of the object, and r is the distance from the center of the object.

At distance r1,

g1 = G * (m/r1²) ---- (1)

At distance r2,

g2 = G * (m/r2²) ---- (2)

Dividing equation (1) by equation (2), we get:

g1/g2 = (r2/r1)²

Substituting the given values, we get:

13.4/7.00 = (3.90/r1)²

Solving for r1, we get:

r1 = 2.01 m

(b) To find the gravitational field at a distance of r3 = 4r1:

Using the same formula for gravitational field strength and substituting the known values:

g3 = G * (m/r3²)

Substituting r3 = 4r1, we get:

g3 = G * (m/(4r1)²)

Substituting the value of r1 that we found in part (a), we get:

g3 = 0.875 m/s²

learn more about gravitational field here:

https://brainly.com/question/26690770

#SPJ11

The volume of the solid obtained by rotating the region bounded by the curves y = x², y = 0, x = 0, and x = 2 about the y-axis is (8π/3) cubic units.

The limits of integration will be from x = 0 to x = 2, since the region of interest is bounded by these values of x.

Using the disk method, the volume of the solid can be found as follows:

V = ∫(π[tex]x^2[/tex])dx from 0 to 2

V = π∫([tex]x^2[/tex])dx from 0 to 2

V = π[[tex]x^3[/tex]/3] from 0 to 2

V = π[([tex]2^3[/tex]/3) - ([tex]0^3[/tex]/3)]

V = (8π/3) cubic units

Volume is a fundamental physical quantity that refers to the amount of space occupied by an object or substance. It is a measure of how much three-dimensional space an object takes up. The unit of measurement for volume is cubic meters (m³) or cubic centimeters (cm³), depending on the scale of the object being measured.

Volume plays an important role in various fields of study, including physics, chemistry, engineering, and mathematics. It is used to measure the quantity of a substance, determine the capacity of containers, and calculate the displacement of fluids. The volume of an object can be calculated using different formulas, depending on the shape of the object.

To learn more about Volume visit here:

brainly.com/question/2098026

#SPJ4

Complete Question:-

Find the volume of the solid obtained by rotating the region bounded by the given curves about the specified axis.

y=x^2, y = 0, x = 0, x = 2,about the y-axis

To answer your question, we need to use the conservation of momentum principle which states that the total momentum of a closed system is conserved.

(a) Pix is the initial momentum in the x-direction. Since there is no external force acting in the x-direction, the initial momentum in the x-direction is equal to the final momentum in the x-direction. Therefore, Pix remains constant and is equal to 0 kg.m/s.

(b) Piy is the initial momentum in the y-direction. Initially, only one puck has momentum in the y-direction, while the other has zero momentum. Therefore, Piy = (0.113 kg)(5.00 m/s) = 0.565 kg.m/s.

(c) Pexe is the external impulse acting on the system in the x-direction. Since there is no external force acting in the x-direction, the external impulse is equal to zero, and therefore Pexe = 0 kg.m/s.

(d) Pfy is the final momentum in the y-direction. Since both pucks have the same mass and are moving at the same speed but in opposite directions, their momenta in the y-direction cancel each other out. Therefore, Pfy = 0 kg.m/s.
To answer your question, I'll need more information about the initial and final velocities of the two pucks. However, I can explain the terms you've mentioned.

(a) Pix refers to the initial momentum in the x-direction for the system.
(b) Piy refers to the initial momentum in the y-direction for the system.
(c) Pf» refers to the final momentum in the x-direction for the system.
(d) Pf.y refers to the final momentum in the y-direction for the system.

Momentum is calculated using the formula: momentum (P) = mass (m) * velocity (v). Once you provide the initial and final velocities for both pucks in x and y directions, I can help you calculate the values for each term.

Learn more about mass here:

https://brainly.com/question/30337818

#SPJ11

According to physics textbooks, the charge of an electron is -1.602 x 10⁻¹⁹coulombs, and its mass is 9.109 x 10⁻³¹ kilograms.

To calculate the expected value of the ratio of e/m (charge to mass ratio) in C/kg, we can use the following equation:

e/m = (2V/B²)^1/2

where e is the charge of the electron, m is the mass of the electron, V is the accelerating potential, and B is the magnetic field strength.

Assuming we are using a cathode ray tube (CRT) experiment, where the electron is accelerated through a potential difference V and then passed through a perpendicular magnetic field B, we can use typical values for V and B in the equation.

A typical value for V is 5000 volts, and a typical value for B is 0.1 tesla. Substituting these numbers into the given equation, we obtain the following:

e/m = (2(5000)/(0.1)²)^1/2 = 1.76 x 10¹¹ C/kg

Therefore, the expected value of the ratio of e/m in C/kg is 1.76 x 10¹¹.

Learn more about electron's charge to mass ratio here:

https://brainly.com/question/11927241

#SPJ1

The youngster has a momentum of 327.2 kg/m/s.

A Ferris wheel is a form of amusement ride that consists of an upright rotating wheel with several passenger-carrying components, often known as a large wheel in the UK attached to the rim so that they rotate with the wheel. These components are also known as passenger cars, cabins, tubs, capsules, gondolas, or pods.

ω = Δθ / Δt

where t is the time interval and is the angle change. Since the Ferris wheel makes one complete revolution in 20 seconds, we have:

ω = (2π rad) / 20 s

ω = 0.3142 rad/s

At the instant shown in the diagram, the child is moving horizontally with a speed of 8.2 m/s. Since the child is at a distance of 26 meters from the center of the axle, the child's linear velocity can be calculated as:

v = ω * r

Substituting the given values, we get:

v = 0.3142 rad/s * 26 m

v = 8.18 m/s

The momentum of the child can now be calculated as:

p = m * v

where m is the mass of the child. Substituting the given value, we get:

p = 40 kg * 8.18 m/s

p = 327.2 kg·m/s

To know more about momentum visit:-

https://brainly.com/question/30677308

#SPJ1

Answer: negative.

Explanation:

The voltage difference between the negative and positive plate of the parallel plate capacitor can be calculated using the formula W = QV, Therefore, the voltage difference between the negative plate and positive plate of the parallel plate capacitor is 113.33 volts.

To find the voltage difference between the plates of a parallel plate capacitor, we can use the formula:
Work = Charge × Voltage difference
The given work (136 J) and the charge (1.2 C). Now, we need to solve for the voltage difference.
1. Rearrange the formula to solve for the voltage difference:
Voltage difference = Work / Charge
2. Plug in the given values:
Voltage difference = 136 J / 1.2 C
3. Calculate the result:
Voltage difference = 113.33 V
So, the voltage difference between the plates of the parallel plate capacitor is 113.33 volts.

Learn more about  voltage difference here: brainly.com/question/14218449

#SPJ11

Answer:

Landon threw his rifle higher than Natalie threw her baton.

Explanation:

The gravitational potential energy (GPE) of an object is given by:

GPE = mgh

where m is the mass of the object, g is the acceleration due to gravity, and h is the height of the object.

Assuming that the baton and rifle have the same mass, we can set their GPEs equal to each other:

mgh = mgh

260 J = mgh

Now we can solve for h:

h = 260 J / (mg)

The mass cancels out, so we can use the same height formula for both objects.

For Natalie's baton:

F = ma

a = F/m

Using the given values, we get:

a = 15.4 N / m (since the mass is not given)

Now we can use the height formula:

h = 260 J / (mg)

h = 260 J / (m * 9.81 m/s²) (acceleration due to gravity)

h = 26.53 / m

h = (1/2)at²

h = (1/2)(15.4 N / m)(t²)

Setting the two expressions for height equal to each other, we get:

26.53 / m = (1/2)(15.4 N / m)(t²)

Solving for t, we get:

t = sqrt((2 * 26.53) / (15.4 N / m))

t = 1.41 s

Now we can use the time and acceleration to find the height:

h = (1/2)at²

h = (1/2)(15.4 N / m)(1.41 s)²

h = 15.33 m

For Landon's rifle, we can use the same height formula:

h = 260 J / (mg)

h = 260 J / (m * 9.81 m/s²)

h = 26.53 / m

h = (1/2)at²

h = (1/2)(15.1 N / m)(4.2 s²)

h = 35.77 m

Therefore, Landon threw his rifle higher than Natalie threw her baton.

Hope this helps!

The predicted current can be calculated using the equation I = V / R. The applied voltage (Va) across the diode. Assuming Va is given, you can use the following approach for both cases:

Assuming a voltage of V is applied to the diode, the current can be predicted using a piecewise linear model.

For a threshold voltage (Vf) of 0.7[V], the diode will start conducting current only when the voltage applied is greater than or equal to 0.7[V]. Therefore, the predicted current can be calculated as:

- If V < 0.7[V], then the predicted current is 0[A].
- If V >= 0.7[V], then the predicted current can be calculated using the equation I = (V - Vf) / R, where R is the resistance of the circuit.

For a threshold voltage of 0[V], the diode will start conducting current as soon as a voltage is applied to it. Therefore, the predicted current can be calculated as:

- The predicted current can be calculated using the equation I = V / R.

In both cases, the predicted current will depend on the resistance of the circuit.

Learn more about voltage here:

https://brainly.com/question/29445057

#SPJ11

The potential energy of the interaction between two charges, charge 1 (q1) and charge 2 (q2), depends on their separation distance (r) and is inversely proportional to this distance. This relationship can be represented mathematically as U ∝ 1/r.

Potential energy (U) is the energy an object possesses due to its position in a force field, such as an electric field generated by charges.

In order to convert this proportionality into an equation, we introduce a proportionality constant (k), which is constant for a given set of charges. Thus, the equation becomes U = k(q1*q2)/r. This equation demonstrates that the potential energy between two charges is directly proportional to the product of their charges and inversely proportional to their separation distance.

In your specific example, the potential energy U is given as 12/40. Assuming this equation refers to the product of the charges divided by the distance (q1*q2/r), you can find the proportionality constant k by rearranging the equation to k = U*r/(q1*q2). By knowing the values of the charges and the separation distance, you can calculate the constant k and subsequently determine the potential energy for other situations involving these charges.

For more such questions on Potential energy.

https://brainly.com/question/24284560#

#SPJ11

Complete Question:

The new kinetic energy per molecule if the temperature rises to 22 °C will be 1.0387 Kave.

To determine the kinetic energy, since the temperature in Kelvin is directly proportional to the average kinetic energy, we can convert the temperatures to Kelvin and find the ratio of the two temperatures. First, convert Celsius to Kelvin by adding 273.15:

11 °C + 273.15 = 284.15 K

22 °C + 273.15 = 295.15 K

Now, find the ratio of the two temperatures:

295.15 K / 284.15 K = 1.0387

The new kinetic energy per molecule will be 1.0387 times the initial value. Therefore, the new kinetic energy per molecule will be about 1.0387 Kave.

Learn more about kinetic energy: https://brainly.com/question/26472013

#SPJ11

The momentum of the electron accelerated through a voltage of 5 million volts is 5.51 x 10^-24 kg m/s.

To calculate the momentum of an electron that is accelerated from rest through a voltage of 5 million volts, we can use the formula p = mv, where p is momentum, m is mass, and v is velocity.

First, we need to find the velocity of the electron. We can use the formula v = sqrt(2qV/m), where q is the charge of the electron (-1.602 x 10^-19 C), V is the voltage (5 million volts), and m is the mass of the electron (9.109 x 10^-31 kg).

Plugging in the values, we get:

v = sqrt(2 x (-1.602 x 10^-19 C) x 5 x 10^6 V / 9.109 x 10^-31 kg)
v = 6.05 x 10^6 m/s

Now that we have the velocity, we can calculate the momentum:

p = mv
p = (9.109 x 10^-31 kg) x (6.05 x 10^6 m/s)
p = 5.51 x 10^-24 kg m/s

Learn More about momentum here :-

https://brainly.com/question/30677308

#SPJ11

Capacitors in DC circuits is that they are insulators. Capacitors store energy between conductors and block direct current while allowing alternating current to pass through.

A conductor and an insulator vary in that a conductor makes it simple for electricity to flow through it while an insulator does not.

Conductor

A substance that carries electricity is known as a conductor. All metals are effective conductors.

Single-element materials with only one valence electron loosely attached to the atom, like copper (Cu), silver (Ag), and gold (Au), make the greatest conductors.

Insulator

Insulators are substances that do not readily transport energy, such as electrical current or heat.

Electrons are present in all materials. In insulators like rubber, the electrons are not free to travel. They are firmly contained within atoms.

Learn more about Insulator here

https://brainly.com/question/20102785

#SPJ11

The sound level (in decibels) of a sound wave that has an intensity of 3.45 µw/m² is approximately 65.4 decibels.

To calculate the sound level in decibels (dB) of a sound wave with an intensity of 3.45 µW/m², you can use the following formula:

Sound Level (dB) = 10 * log10(I / I₀)

where I is the intensity of the sound wave (3.45 µW/m²) and I₀ is the reference intensity (10⁻¹² W/m²). Plugging the values into the formula:

Sound Level (dB) = 10 * log10(3.45 * 10⁻⁶ / 10⁻¹²)
Sound Level (dB) ≈ 10 * log10(3.45 * 10⁶)
Sound Level (dB) ≈ 10 * log10(3.45 * 1,000,000)
Sound Level (dB) ≈ 10 * log10(3,450,000)
Sound Level (dB) ≈ 65.4 dB

So, the sound level of the sound wave is approximately 65.4 decibels.

Learn more about sound level here: https://brainly.com/question/28784082

#SPJ11

The hypergeometric distribution with parameters N and n is the probability distribution of the number of successes in n draws without replacement from a finite population of N items, of which k are successes.

In this case, N = 7 and n = 2, and we are testing the null hypothesis k = 2 against the alternative hypothesis k = 4, where k is the number of successes in the sample.

The probability of observing exactly 2 successes in the sample under the null hypothesis is given by:

P(X = 2 | k = 2) = (2 choose 2) * (5 choose 0) / (7 choose 2) = 5/21

where (a choose b) denotes the number of ways to choose b items from a distinct items.

To calculate the probabilities of type I and type II errors, we need to specify a significance level (α) and a power (1-β) for the test. Let's assume a significance level of α = 0.05 and a power of 1-β = 0.8.

Type I error: Rejecting the null hypothesis when it is actually true (i.e., k = 2)

The probability of a type I error is equal to the significance level α. In this case, if the null hypothesis is rejected only if the value of the random variable is 2, then the probability of a type I error is:

P(type I error) = P(reject H0 | H0 is true and X = 2)

= P(X = 2 | k = 2)

= 5/21

Type II error: Failing to reject the null hypothesis when it is actually false (i.e., k = 4)

The probability of a type II error is equal to the probability of not rejecting the null hypothesis when the alternative hypothesis is true. In this case, we need to calculate the probability of observing a value of the random variable that is not equal to 2, given that k = 4. This is equivalent to the complement of the power of the test:

P(type II error) = P(not reject H0 | H1 is true and X ≠ 2)

= P(X ≠ 2 | k = 4)

= 1 - P(X = 2 | k = 4)

= 1 - [(2 choose 2) * (3 choose 0) / (7 choose 2)]

= 5/21

Therefore, the probabilities of type I and type II errors are both equal to 5/21, assuming a significance level of α = 0.05 and a power of 1-β = 0.8.

learn more abouT hypothesis here:

https://brainly.com/question/606806

#SPJ4

When the switch is in one position, capacitor G will charge from the battery. When the switch is in the other position, capacitor G will discharge through capacitor C2 and resistor R.

What is Capicator?

A capacitor is an electrical component that stores electrical energy and is used in electronic circuits to filter or block signals, store charge, or couple one circuit to another. It consists of two conductive plates separated by an insulating material called a dielectric. When a voltage is applied across the plates, it creates an electric field, and charges accumulate on the plates.

The circuit diagram can be drawn as follows:

Draw a battery symbol with the positive (+) terminal on the left and the negative (-) terminal on the right.

Connect a switch symbol to the positive (+) terminal of the battery.

Connect one end of capacitor G to the other end of the switch.

Connect the other end of capacitor G to the negative (-) terminal of the battery.

Connect capacitor C2 in parallel with resistor R.

Connect the series combination of capacitor C2 and resistor R in parallel with capacitor G.

Learn more about Capicator from the given link

https://brainly.com/question/21851402

#SPJ1

The average value of sin(2ωt) for a complete cycle is 0.

To find the average value of sin(2ωt) over a complete cycle, we need to integrate the function over a period and divide by the period length. The function is sin(2ωt), and its period is T = π/ω (since the period of sin(x) is 2π, and sin(2ωt) has twice the frequency).

Integrate sin(2ωt) over one period
∫(sin(2ωt)) dt from 0 to T (T = π/ω)

Evaluate the integral
[-(1/2ω)cos(2ωt)] from 0 to T

Substitute the limits and subtract
[-(1/2ω)cos(2ω(π/ω))] - [-(1/2ω)cos(2ω(0))]

[-(1/2ω)cos(2π)] - [-(1/2ω)cos(0)]

[-(1/2ω)(1)] - [-(1/2ω)(1)]

(1/2ω) - (1/2ω) = 0

Divide by the period length (T)
Average value = (0) / (π/ω) = 0

So, 0 is the average value of sin(2ωt) for a complete cycle.

More on cycle: https://brainly.com/question/31324451

#SPJ11

The ion has a charge to mass ratio of 3.56 x 107 C/kg (coulombs per kilogram).

An electric field accelerates the positive ions before passing them into a magnetic field. Ions with varying mass-to-charge ratios can be gathered and quantified by altering the accelerating voltage, or the speed of the particle, or the magnetic field intensity.

The Lorentz force law describes the force that a charged particle with charge q travelling with velocity v in a magnetic field B experiences:

F = q * v x B

Due to the potential difference V, the electric field produces the centripetal force necessary to keep a circle in motion.

F = q * E = q * V / d

d = 2R is the formula for relating the distance d to the radius R.

In the two equations above, if we take the velocity v out, we get:

q/m = 2V/B² R²

Using a linear regression to fit a straight line to the data, we obtain:

R² = (35.35 cm²/kV) * V - 52.21 cm²

The slope of the line is 35.35 cm²/kV.

q/m = 2V/B² R² = 2V/B² (slope of the line)

When we exchange the values for V and B, we obtain:

q/m = 2 * (10³ V) / (0.250 T)² * 35.35 cm²/kV = 3.56 x 10⁷ C/kg

To know more about magnetic field visit:-

https://brainly.com/question/21245662

#SPJ1

A meteorologist wanting to know if east and west Australia have the same distribution of storms should use a statistical test called the Chi-Square Test for Independence.

This test helps determine if there is a significant association between the two categorical variables (in this case, storm distribution in east and west Australia).

1. Formulate the null hypothesis (H0): There is no association between the storm distribution in east and west Australia (i.e., the distributions are the same).
2. Formulate the alternative hypothesis (H1): There is an association between the storm distribution in east and west Australia (i.e., the distributions are different).
3. Collect data on the storm occurrences in both east and west Australia for a specific period.
4. Create a contingency table with the observed frequencies of storms in each region.
5. Calculate the expected frequencies for each cell in the table based on the assumption that H0 is true.
6. Compute the test statistic, Chi-Square (X²), by comparing observed and expected frequencies.
7. Determine the degrees of freedom (df) for the test, which is (number of rows - 1) * (number of columns - 1).
8. Find the critical value for the chosen significance level (e.g., α = 0.05) and the calculated degrees of freedom.
9. Compare the test statistic (X²) to the critical value. If X² is greater than the critical value, reject H0 and accept H1. If X² is less than or equal to the critical value, do not reject H0.

By following these steps, the meteorologist can determine if there is a significant difference in the storm distributions between east and west Australia.

More on climate in Australia: https://brainly.com/question/3450607

#SPJ11

When computing probabilities for the sampling distribution of the sample mean, the z-statistic is calculated using the formula [tex]$Z = \frac{\bar{x} - \mu}{\frac{\sigma}{\sqrt{n}}}$[/tex].

Here, x represents the sample mean, μ is the population mean, σ is the population standard deviation, and n is the sample size. This z-statistic allows you to compare the sample mean to the population mean and determine how likely it is to observe such a sample mean by chance, given the characteristics of the population.

The z-statistic is used to determine the probability of obtaining a sample mean as extreme as the observed sample mean, assuming the null hypothesis is true. A z-score greater than or equal to 1.96 or less than or equal to -1.96 corresponds to a significance level of 0.05, indicating that the observed sample mean is significantly different from the population mean.

The use of the z-statistic allows for the estimation of confidence intervals and hypothesis testing, making it a fundamental tool in inferential statistics.

Learn more about  z-statistic: https://brainly.com/question/28810342

#SPJ11

Assuming that the mirror is flat and the surface is smooth, the angle of reflection will be 44 degrees.

According to the law of reflection, the angle of incidence is equal to the angle of reflection. This means that the angle between the incident ray and the mirror surface is equal to the angle between the reflected ray and the mirror surface.

Therefore, if a ray of light strikes mirror 1 with an angle of incidence of 44 degrees, the angle of reflection of the ray when it leaves will also be 44 degrees.

This law of reflection is fundamental to optics and is used in various applications, such as in the design of mirrors, lenses, and other optical components. By understanding the behavior of light when it interacts with these components, we can design optical systems that can be used for imaging, communication, and many other applications.

To know more about law of reflection click on below link:

https://brainly.com/question/12690019#

#SPJ11

The change is considered physical on the event of new substance was not formed. The soft- silvery white metal is sodium which on reaction with chlorine gas to create white crystals like sodium chloride also most commonly known as table salt.

The conversion from yellow-green gas to white crystal like solid structures considered a physical change on the account of its chemical composition wasn't altered.

Sodium chloride is also used as a medicine by providing it as a saline solution for implementation in nasal spray. it also provides aid in being useful as a fire extinguisher , cleanser like shampoo etc.

To learn more about sodium chloride,

https://brainly.com/question/24878544

#SPJ4

Answer:

D  it's correct I got 100% on edge

Explanation:

To find the total magnetic field, you would need to integrate dB over the entire length of the unshielded section of the wire.

Here's the step-by-step explanation:
1. The Biot-Savart law relates the differential magnetic field dB to the current I, the distance from the wire to the point P (r), and the angle between the current and the position vector (θ). The equation is:
dB = (μ₀ * I * dl * sinθ) / (4π * r²)

2. Calculate the distance r: Point P is x/2 above the wire, and the distance l from the midpoint of the unshielded section. Using the Pythagorean theorem, r = √((x/2)² + l²).

3. Calculate the angle θ: Since the angle is between the current and the position vector, we can use the right triangle formed by the distances x/2 and l. Using the inverse tangent function, θ = arctan((x/2) / l).

4. Plug the values of I, dl, r, and θ into the Biot-Savart law equation and calculate the differential magnetic field dB at point P due to the small length of wire dl.

Remember that this calculation is for the differential magnetic field dB at point P due to a small length of wire dl.

To know more about "Biot-Savart law" refer here:

https://brainly.com/question/13576053#

#SPJ11

It will take 0.375 seconds for a pulse to travel from one support to the other along the cord with a tension of 130 N.

The speed of a pulse traveling through the cord is given by the formula v = √(T/μ), where T is the tension in the cord and μ is the linear mass density (mass per unit length) of the cord. In this case, the linear mass density can be found by dividing the mass of the cord (0.75 kg) by its length (30 m), giving μ = 0.025 kg/m.
Substituting the given values, we have:

v = √(130 N / 0.025 kg/m) = 80 m/s (rounded to two significant figures).
The time it takes for the pulse to travel from one support to the other is equal to the distance between the supports divided by the speed of the pulse, so:

t = 30 m / 80 m/s = 0.375 s (rounded to three significant figures).
Therefore, it will take 0.375 seconds for a pulse to travel from one support to the other along the cord with a tension of 130 N.

Learn more about tension: https://brainly.com/question/24994188

#SPJ11

It will take approximately 0.75 μs for the function generator with a 50 Ω output resistance to charge the gate of the RFD3055LE MOSFET from 0 V to the maximum Vth of 4 V using a 5 V input.

We need to calculate the time it will take for the function generator to charge the gate of the RFD3055LE MOSFET from 0 V to the maximum threshold voltage (Vth) specified in the datasheet using a 5 V input.
First, we need to find the capacitance of the gate of the MOSFET. According to the datasheet, the typical gate capacitance (Ciss) of the RFD3055LE is 1500 pF.
Next, we can use the formula Q=CV to calculate the charge (Q) required to charge the gate of the MOSFET to the maximum Vth. Assuming the maximum Vth is 4 V (as stated in the datasheet), we get:
Q = CV
Q = 1500 pF x 4 V
Q = 6 nC
Now, we can use another formula to calculate the time it will take to charge the gate from 0 V to 4 V using the 50 Ω output resistance of the function generator and a 5 V input. The formula is:
t = RC ln((Vmax - Vmin)/Vmax)
where t is the time, R is the resistance, C is the capacitance, Vmax is the final voltage (4 V), and Vmin is the initial voltage (0 V).
Substituting the values, we get:
t = 50 Ω x 1500 pF x ln((4 V - 0 V)/4 V)
t = 0.75 μs

To learn more about resistance click here https://brainly.com/question/29427458

#SPJ11

The resistance of the silver wire at 34 degrees Fahrenheit is approximately 5.23 ohms.

To solve this problem, we need to use the temperature coefficient of resistance (TCR) for silver, which is 0.0038 per degree Celsius.

First, we need to convert the temperature from degrees Celsius to degrees Fahrenheit, since the TCR is typically given in Fahrenheit units. To do this, we can use the formula:

°F = (°C x 1.8) + 32

So for 20 degrees Celsius, we have:

°F = (20 x 1.8) + 32 = 68°F

Now we can use the TCR to calculate the new resistance at 34 degrees Fahrenheit. We can use the formula:

R2 = R1 * [1 + TCR * (T2 - T1)]

Where:
R1 = initial resistance (6.00 ohms)
T1 = initial temperature (68°F)
TCR = temperature coefficient of resistance (0.0038 per degree Fahrenheit)
T2 = final temperature (34°F)
R2 = final resistance (what we're trying to find)

Plugging in the values, we get:

R2 = 6.00 * [1 + 0.0038 * (34 - 68)]
R2 = 6.00 * [1 - 0.1292]
R2 = 6.00 * 0.8708
R2 = 5.23 ohms (rounded to two decimal places)

Therefore, the resistance of the silver wire at 34 degrees Fahrenheit is approximately 5.23 ohms.

To know more about resistance refer here:

https://brainly.com/question/30799966

#SPJ11