A rough estimate of the excess pH of the solution is 1.74.
The answer to the question is that the concentration of NaOH is 0.2 M.
The question also states that the concentration of HNO3 is equal to that of NaOH, which is 0.2 M.
The volumes of sodium hydroxide and nitric acid that are provided to us are 50 mL and 60 mL, respectively. This implies that adding the two will result in the final volume.
= 50 plus 60 equals 110, or 0.11 liters
We know that there is a neutralizing reaction between NaOH and HNO3 based on theory. Then, as a means of answering the question, we record the aforementioned equation.
OH⁻ + H⁺ ---> H₂O
Finally, we apply logarithm to get our final answer
pH = - log [ H⁺ ]
pH = - log [0.01818]
pH = 1.74
Learn more about pH
brainly.com/question/10722909
#SPJ4
if 87 grams of K2SO4 (molar mass 174 grams) is dissolved in enough water to make 250 milliliters of solution, what are the concentrations of the potassium and the sulfate ions ?
[K+ ] [SO4^2]
A. 0.020 M 0.020 M
B. 1.0 M 2.0 M
C. 2.0 M 1.0 M
D. 2.0 M 2.0 M
E. 4.0 M 2.0 M
If 87 grams of K₂SO₄ is dissolved in enough water to make 250 milliliters of solution, the concentrations of the potassium [K⁺] is 4 M and the sulfate ions [SO₄²⁻] is 2 M.
The molar mass of the K₂SO₄ = 174 g/mol
The mass of the K₂SO₄ = 87 g
the moles of the K₂SO₄ = 87 / 174
= 0.50 mol
moles of K⁺ = 0.50 × 2
= 1 mol
moles of SO₄²⁻ = 0.50 × 1
= 0.50
The concentration of [K⁺] = 1 / 0.250 = 4 M
The concentration of [SO₄²⁻] = 0.50 / 0.250 = 2 M
To learn more about concentration here
https://brainly.com/question/19579038
#SPJ4
Benzene is a liquid with molecular formula C6H6
Ethene is a gas with molecular formula C2H4
Which statement is correct?
A 1 mole of benzene and 1 mole of ethene contain the same number of atoms.
B 1 mole of benzene and 1 mole of ethene both have a volume of 24 dm³ at room temperature and pressure.
C Both benzene and ethene have the same empirical formula.
D The number of carbon atoms in 0.5 moles of ethene is equal to the Avogadro constant.
And why is it that way?
Answer:
Benzene is a hydrocarbon with molecular formula of C6 H12 including 3πbond which are rotating
benzene is also a aromatic but ethene is not a aromatic
Explanation:
Answer: No, one mole of benzene (C6H6) and one mole of ethene (C2H4) will have the same number of molecules (6.02x10^23 benzene molecules and 6.02x10^23 molecules of ethene). However, one molecule of benzene consists of 12 atoms, while one molecule of ethene consists of 6 atoms.
H+ ions increase in concentration at lower pH values. Calculate how many more H+ ions there are in a solution at a pH = 2 than in a solution at a pH = 6. Find the concentration of H+ ions at a pH = 2 and at a pH = 6 in Table B. Then divide the concentration of H+ ions at a
pH = 2 by the of H+ ions at a pH = 6. Record your answer in Table C.
What is the concentration of H+ ions at a pH = 2?
mol/L
What is the concentration of H+ ions at a pH = 6?
mol/L
How many more H+ ions are there in a solution at a
pH = 2 than in a solution at a pH = 6?
need ASAP give
brainliest
The number of hydrogen ions, H⁺, that are there in a solution at a
the pH of 2 than in a solution at a pH of 6 is 1000 or 10⁴.
What is the pH of a solution?The pH of a solution is the negative logarithm in base 10 of the hydrogen ion concentration of the solution.
pH = - log [H⁺]
Hence, the hydrogen ion concentration of a solution whose pH is given is determined using the formula given below as follows:
[tex][H^{+}] = 10^{-pH}[/tex]
For the solution of pH of 2
[H⁺] = 10⁻²
[H⁺] = 0.01 M
For the solution of pH of 6
[H⁺] = 10⁻⁶
[H⁺] = 0.000001 M
The ratio of the hydrogen ion concentration of the solutions will be:
Ratio of hydrogen ions = 0.01 / 0.000001 M
Ratio of hydrogen ions = 10000 or 10⁴
Learn more about pH of solutions at: https://brainly.com/question/172153
#SPJ1
Between what is expected and what actually happens?
Irony is a mismatch between what is expected and what actually occurs. These literary methods aid in the creation of dramatic effects in writing.
What is Irony?Irony is a disconnect between what is expected to happen and what actually happens. These types of literary devices help in creating a dramatic effect in literature.
Irony is a literary device which was used extensively in Greek tragedy. It involves expressing the meaning of something by making use of words which technically mean the opposite of the original thing being conveyed.
Irony is used for a dramatic or humorous effect. There are three types of irony seen in literature as follows:
• Verbal Irony
• Situational Irony
• Dramatic Irony
Verbal irony involves the usage of different words to mean something dissimilar to what they look like they actually mean.
Situational Irony means that what happens is totally different from what was expected to be happening.
Dramatic Irony occurs in plays, etc. where the audience or the readers are more aware of what is actually going on as compared to the character in the scene.
Learn more about irony here:
https://brainly.com/question/13428382
#SPJ4
Malachite is a green colored mineral that is 57.5% copper. What mass of copper is present in a 250.0 g sample of malachite
57.5% Cu2(CO3)(OH) (OH) Other elements are also present in addition to copper.
To get the mass percent of copper in malachite (Cu2(OH)2CO3), apply the following formula:
Malachite (Cu2(OH)2CO3) has a molar mass of 2x63.5% + 2(16+1) + 12 + (16x3) = 127 + 2(17) + 12 + 48 = 127 + 34 + 12 + 48 = 221g/mol.
Cu2(OH)2CO3 has a Cu mass of 2 x 63.5g, or 127g.
The mass-based fraction of Cu in Cu2(OH)2CO3 is calculated as Cu2(OH)2CO3 mass per mol mass multiplied by 100 = 127/221 x 100 = 57.5%.
Malachite Cu2(OH)2CO3 has 57.5% of its mass in copper.
To learn more about Malachite's please click on below link
https://brainly.com/question/15461613
#SPJ4
given a mixture of lead (2) oxide,ammonium chloride and sodium chloride,describe how this mixture can be separated to obtain a sample of each
Answer:
It can be done by crystallization, filtration, and sublimation. The easiest method among the three is separation by sublimation. Ammonium chloride sublimes upon heating. Actually, the sublimation is a decomposition of ammonium chloride forming ammonia and hydrogen chloride
Explanation:
What is the E0cell? Mg 2+|Mg and Ci2|Ci
The E0cell for the halfcell that we have in the question is 3.73 V.
What is the cell potential?We have to know that the cell potential as we know it has to do with the electrical potential that is involved when we have the oxidation or the reduction of a given specie. In the case of what we have here, we have the cells that are composed of magnesium and chlorine and we want to find the electrode potential of the cells.
We must note that the basis that we can be able to use to find the electrode potential of the cell is the standard hydrogen electrode which has been assigned the value of about 0.00 V and all of the other cell potentials that we have can now be measured against this standard that has been fixed.
We have;
Magnesium half cell= -2.37 V
Chlorine half cell = + 1.36 V
Then we have;
E0cell = + 1.36 - (-2.37)
= 3.73 V
Learn more about cell potential:https://brainly.com/question/1313684
#SPJ1
sodium is lost from the body in the ______.
Answer: In the sweat and urine
Explanation:
Sodium is part of body's mineral. It will easily go out or lose when we we sweat and when we urinate. They lost from the body in form of water contained sodium.
Freddy mixes a solid chemical with a liquid chemical and generates a chemical reaction. What can be said about any mixture of chemicals he used
Many of these, including cheese, gelatin, and various inks, are commonplace. Like the other classes, mixtures of solids and liquids may be separated in many ways.
science has been actively involved in the pursuit of this goal since it is crucial for a variety of liquids. When two or more distinct substances physically join, a mixture is produced that can be dispersed back into its constituent parts. a bowl of various candies, a pile of various leaves, steel, and sugar syrup A gelatin is any two or more different types of particles together. These particles are physically bound together rather than reacting chemically with one another. Two or more reactants are changed into one or more separate products during a chemical reaction. Alternately, we might assume that a chemical reaction rearranges the atoms of the reactants to create new products.
To learn more about gelatin please click on below link
https://brainly.com/question/28046370
#SPJ4
What numbers do I put on the right side?
The leftovers of [tex]C_2H_2[/tex] will be 6 moles while the leftover of [tex]O_2[/tex] will be zero.
Mole ratio of reactantsIn the originally balanced equation of the reaction, 2 moles of [tex]C_2H_2[/tex] and 5 moles of [tex]O_2[/tex] react completely to produce 4 moles of [tex]CO_2[/tex] and 2 moles of [tex]H_2O[/tex]. This equation is balanced with no reactant left.
Now, 8 moles of [tex]C_2H_2[/tex] were made to react with 5 moles of [tex]O_2[/tex] in the second reaction. The mole ratio of the two reactants for complete reactions is 2:5. Thus, [tex]C_2H_2[/tex] has been supplied in excess.
Since only 5 moles of [tex]O_2[/tex] is available, only 2 moles of [tex]C_2H_2[/tex] will be consumed. Thus, 6 moles of [tex]C_2H_2[/tex] will be left while the oxygen will be completely consumed. That is, the amount of [tex]O_2[/tex] left would be zero.
More on mole ratio of reactants can be found here: https://brainly.com/question/15288923
#SPJ1
how many chlorine atoms are in 0.650 mol of ca(clo4)2?
Chlorine atoms that are present in 0.650 mol of ca(clo4)2 is : 7.83 *10^23.
What is meant by molar mass?Mass in grams of 1 mole of the substance is called the molar mass of a substance. We can obtain a substance's molar mass by summing the molar masses of its component atoms. We can use the calculated molar mass to convert between mass and number of moles of a substance.
As we know, one mole of any atom is equivalent to the Avogadro's number or 6.02 x 10²³ particles.
0.650 * 6.023 * 10^23 * 2
= 7.83 *10^23 chlorine atoms.
To know more about molar mass, refer
https://brainly.com/question/837939
#SPJ4
Why are all of the elements in group 18 relatively un reactive whereas those in group 17 are very reactive?
All of the elements in group 18 are relatively un-reactive whereas those in group 17 are very reactive because group 18 elements have complete outer shell and group 17 needs only one electron to complete octet.
In the periodic table , the group 18 elements are called as the noble gases. the group 18 elements have the complete octet that mean the complete valence shell and they are stable due to which they are un reactive and also called as inert gases.
In the group 17 , the elements are called as halogens. the group 17 elements have the incomplete outer shell and they only need one electron to complete their octet due to which they are very reactive.
To learn more about periodic table here
https://brainly.com/question/29788210
#SPJ4
When 10g of hydrogen gas react with chlorine gas, how many liters hydrogen monochloride (HCl) will be produced at STP
The amount of hydrogen monochloride that is produced at STP is 152 mL.
The balanced chemical reaction can be depicted as follows:
H₂ + Cl₂ -----> 2 HCl
According to stoichiometry, When one mole of hydrogen reacts with one mole of chlorine, it yields two moles of hydrogen monochloride. Stoichiometry defines the relationship between the quantities of reactants and products before, during, and following chemical reactions
If, 2 g of Hydrogen reacts with 71 g of chlorine to form 73 g of Hydrogen Chloride.
Therefore, if 10 g reacts with 142 g of chlorine, the HCl produced will be 152 g or 152 ml of HCl.
To learn more about stoichiometry check the link below:
https://brainly.com/question/14935523
#SPJ4
A sample of a substance was heated strongly in a crucible, and the sample increased in mass.
This is evidence that
A. A gas had been evolved.
B. The substance had melted.
C. The substance had sublimed.
D. A chemical change had taken place.
O E. A change of state had occurred.
When a sample of a substance was heated strongly in a crucible, the sample increased in mass. This is evidence that a chemical change has taken place.
In a closed system, when no heat or energy is applied, the mass of a substance will remain the same. But, when heated at high temperatures, the average kinetic energy of the particles of a substance increase due to which the particles will move faster, and collide with each other and take up more space. There will be transfer of energy due to application of heat. As a result of this the mass of the sample also increases.
Hence, option D is correct
To know more about increase in mass here
https://brainly.com/question/29586339
#SPJ4
What is the name of most reactive non-metal element on the periodic table?
The name of most reactive non-metal element on the periodic table is fluorine
Fluorine is the nonmetal in the periodic table that is the most reactive.
On the Pauling scale, it has the highest electronegativity of any element (3.98). Fluorine is a highly reactive, diatomic gas that may mix with practically every other element to form compounds that have entirely different properties from either of the original components. The boiling point of fluorine is -188 °C (-310 °F).
Hydrofluoric acid and hydrogen fluoride gas are produced during the reaction with water: HF + H₂O ⇒H⁺ + HF + OH.
Chemical elements are shown on a periodic table in order of their atomic number. The classification of elements and their relationships to one another can be understood using the periodic table.
Learn more about reactivity at https://brainly.com/question/20570629
#SPJ4
6.
In Period 2, as the elements are considered from
left to right, there is a decrease in
BO
A.
ionization energy
B.
atomic masS
C.
metallic
character
D. nonmetallic character
Based on the structural formulas, which of the following identifies the compound that is more soluble in water and best helps to explain why ?
O Ethane, because the electron clouds of its molecules are more polarizable than those of propanol.
O Ethane, because its molecules can fit into the spaces between water molecules more easily than those of propanol can.
O Propanol, because its molecules have a greater mass than the molecules of ethane have.
O Propanol, because its molecules can form hydrogen bonds with water molecules.
Propanol, because its molecules can form hydrogen bonds with water molecules.
Reason:
Propanol contains a hydroxyl (-OH) group, which can form hydrogen bonds with the partially negative oxygen atoms in water molecules.This interaction increases the solubility of propanol in water.Ethane is a nonpolar hydrocarbon and it does not have any functional groups that can interact with water in this wayHydrogen bonding between propanol and water makes the solution more stable and thus more soluble.Nonpolar compounds like Ethane are not attracted to water molecules and are less likely to dissolve in them.Therefore, propanol is more soluble in water than Ethane.
Learn more about Propanol here:
https://brainly.com/question/25876043
#SPJ4
Beryllium iodide + strontium sulfate --->
Normal:
Complete ionic:
Net ionic:
Normal
BeI2 + SrSO4 → SrI2 + BeSO4
Complete ionic:
Be2+ + 2I- + Sr2+ + SO42- → Sr2+ + 2I- + Be2+ + SO42-
Net ionic:
Be2+ + 2I- → Sr2+ + 2I- + Be2+
The complete ionic equation for this reaction is the same as the normal equation, except that the reactants and products are written as their respective ions.
The net ionic equation is the same as the complete ionic equation, except that the spectator ions, which are ions that appear on both the reactant and product sides, are omitted.
In this reaction, strontium sulfate and beryllium iodide react to form strontium iodide and beryllium sulfate. The spectator ions are Sr2+ and 2I-, which appear on both sides of the equation and cancel out, leaving the net ionic equation.
For more questions like Ionic equation click the link below:
https://brainly.com/question/30006628
#SPJ4
Can you divide equation I by another factor and still have it be correct?
Equation I cannot be divided by another factor as it will introduce errors in the equation.
What are errors?Errors in chemical analysis result when there is a difference between observed value and the true value.If the magnitude of errors is large , it results in decrease in accuracy, reproducibility, and precision.
There are three types of errors:1) random error 2) systematic error 3) human error.The cause of random errors are difficult to quantify while the human errors can be minimized by taking a range of readings to reduce the error.
Errors while measuring boiling point may be human errors while noting down the boiling temperature or instrumental or systematic error if there is a fault in the thermometer.
Learn more about errors,here:
https://brainly.com/question/15810279
#SPJ1
what type of bond is found in chlorine molecules
Answer: It is a Covalent Bond
Explanation:
In a chlorine molecule, the atoms bonded by a covalent bond as a chlorine atom needs one electron to complete its octet and shares one electron with another chlorine atom.
Answer:
mono covalent bonds
Explanation:
Cl shares 1 electron with another Cl atom
so it makes Cl2 a mono covalent compound
A 16. 81 gram sample of an organic compound containing C, H and O is analyzed by combustion analysis and 21. 33 grams of CO2 and 5. 822 grams of H2O are produced. In a separate experiment, the molar mass is found to be 104. 1 g/mol. Determine the empirical formula and the molecular formula of the organic compound
A 16. 81 gram sample of an organic compound containing C, H and O is analyzed by combustion analysis and 21. 33 grams of CO₂ and 5. 822 grams of H₂O are produced. In a separate experiment, the molar mass is found to be 104. 1 g/mol. The empirical formula is CH₃ and molecular formula is C₇H₇O₂₁
The empirical formula can be calculate as follows:
The reaction can be write
CxHyOz → CO₂ + H₂O
As a result, we may state that there are two O-atoms for every one C-atom (12g) in CO2 (32g).
This indicates that the ratio is 12g C/32g O.
The molar mass of CO₂ is 44 g/mole.
(12/44) x 33 = 9 g
There are 9 grams of carbon in every 33 grams of CO₂
The same can be done for water:
In H₂O, each element is represented by two H atoms and one O atom. 2 g H and 16 g O.
[2 g H / 18 g H2O] are present in 5. 822 g of water
(2/18)x 5.822= 0.6468 g
The initial sample had 14.16 g of sample, 9 g of C, and 0.6468 g of H, which resulted in 34.3532g of oxygen.
Determine the amount of moles.
C: 9.0 g / 12.0 g/mol = 0.75 mol
H: 0.6468 g / 1.0 g/mol = 0.6468 mol
O: 34.3532g / 16.0 g/mol = 2.14 mol
Then we divide by the smallest number
C: 0.75 mol / 0.6468 mol = 1
H: 0.6468 mol / 0.6468 mol= 1
O: 2.14 mol/ 0.6468 mol = 3
so the empirical formula will be CH₃
Determine the molecular formula
mass molecular formula / mass of empirical formula = n
We have to multiply the empirical formula by n to get the molecular formula.
104.1 /15 = 7= n
This means the molecular formula = C₇H₇O₂₁
Learn more about empirical formula at https://brainly.com/question/2263904
#SPJ4
which type of radioactive decay has the net effect of changing a neutron into a proton?
Answer: Beta Decay is the kind of radioactive decay that has the net effect of changing a neutron into a proton.
Explanation:
The opposite path, in which a neutron becomes a proton, is also possible. Exactly what happens is that a weak force changes the flavor of the card from top to bottom and vice versa. When this happens, the quark emits a W boson, which quickly decays into either an electron/antineutrino pair or a positron/neutrino pair, depending on the direction of change (neutron decays to protons, electron/antineutrino pairs are created).
Learn more about Beta Decay:
https://brainly.in/question/3235096
legit need help asap
ignore the screenshot stuff
BUT LIKE
HELP
Answer:
a.LiF
b.BeO
c.MgF2
d.AlCl3
e.Be3N2
Explanation:
So, the main thing with chemical formulas is making sure that the cation and anion's charges will cancel out if you add the total sum of charges together.
For A, halogens only form -1 charge ions, so F will have to be F-. Lithium, being a group 1 element, will form an ion of Na+. Therefore, the formula is NaF.
For B, Beryllium is a Group 2 element that forms +2 charges, while Group 16 elements like O form -2 charges. Therefore, BeO would work as the sum of charges will equal zero.
For C, Magnesium is a Group 2 element, so it has a +2 ion, while fluorine is a halogen, so a -1 charge for the F- ion. So, you need two F- ions to balance out one Mg2+ ion. So, it is MgF2
For D, Aluminum is a Group 13 element, which can form +3 charges. Therefore, Al can form a +3 charge, so that means for Cl- (recall it is a halogen,) it needs three Cl- ions to cancel one Al3+ ion. So, it is AlCl3.
For E, Group 15 elements like N form -3 ions, so the ion for nitrogen is N3-. Beryllium is a Group 2 element, so it is Be2+. The common multiple of 3 and 2 is 6, so you need to find a way to have a +6 and -6 charge. So, three Be2+ ions (totaling a net charge of +6) need to cancel with two N3- ions (again a net charge of -6) to form the compound. Therefore, it is Be3N2.
In an atom that has lost an electron, the place vacated by the free electron is referred to as a(n)
The space left by the free electron in an atom after it has lost one electron is known as a hole.
The term "free electron" refers to an electron that has broken loose from its "parent" atom and is now free to move about the material at random. A vacancy, also known as a hole, is created in the atom when a bonded electron in a lattice atom breaks free. The number of electrons in an atom's valence shell, or n shell in this example, has a significant impact on the electrical properties of the element that the atom represents. The least force of attraction is felt by the electrons in the valence shell since they are the furthest from their nucleus.
To learn more about atom click here https://brainly.com/question/1566330
#SPJ4
The type of bonding and the number of covalent bonds an atom can form with other atoms is determined by __________
The type of bonding and the number of covalent bonds an atom can form with other atoms is determined by number of unpaired electrons.
The number of unpaired electrons in the valence shell because covalent bond is equal to a chemical bond that involves sharing a pair of electrons between atoms in a molecule. When electrons are shared among atoms, they make a bond known as a covalent bond. Because atoms are sharing one pair of electrons, this covalent bond is known as a single bond. These atoms can do the equal aspect that the H atoms did; they proportion their unpaired electrons to make a covalent bond.
Thus, the number of unpaired electrons is useful in the type of bonding and the number of covalent bonds.
To learn more about covalent bond check the link below:
https://brainly.com/question/3447218
#SPJ4
Instructions: Use the following scenario for questions 2 and 3.
Scenario: The chef places cold water in a pot, places the pot on the stove, and monitors its temperature as time passes. Which of these BEST describes the changes the chef sees occurring at different stages of heating the pot of water?
Before the water begins to boil, thermal energy _____.
remains the same.
increases.
decreases.
Thermal energy increases before the water begins to boil.
Thermal energy is produced when the atoms and molecules in matter vibrate faster due to an increase in temperature. As the average kinetic energy of its particles increases, the thermal energy of the object increases.
After reaching water at its boiling point thermal energy remain same because temperature remain constant after reaching once at boiling point. Thermal energy is directly proportional to temperature. Hence, chef will notice two phenomena during water begins to boil.
Learn more about thermal energy visit:
brainly.com/question/7541718
#SPJ4
naproxen (Aleve): 73.03%C, 6.13%H, and 20.84%O Express your answer as a chemical formula?
If the molecular weight is 230.26 g/mol carbon = 73.03% = 230.26*73.03/100 = 168.15/12 = 14 Carbons Hydrogen = 6.13% = 230.26*6.13/100 = 14/1 = 14 Hydrogens Oxigen = 20.84% = 230.26*20.84/100 = 47.98/16 = 3 Oxygens Hence the empirical formula is C14H14O3
What is a weight example?The International System for Units (SI) defines the newton as the unit of force, which is used to measure weight. For instance, a kilogram of matter weighs around 9.8 newtons on Earth's surface and around each as much on Moon.
How are weights determined?Weight, which is expressed in newtons, is a unit of measurement for the gravitational force acting on an object. The mass of a bird with a mass of 15 g changes with the strength of the gravity influence acting on it, and would differ significantly if it were measured, for instance, on the Moon rather than on Earth.
To know more about weight visit:
https://brainly.com/question/6853752
#SPJ4
describe the phase and temperature chacges that will occur if you heat 50.0 g of h2o in its solid state at -8 C until it all vaporizes
The phase and temperature changes that will occur if you heat 50.0 g of H2O in its solid state at -8 C until it all vaporizes is that the solid H2O will transition to a liquid state at 0 C and then to a vapor at 100 C.
What is vapor?Vapor is an aerosolized suspension of tiny liquid particles that are released into the air. It is made up of a mixture of water and other chemicals, such as nicotine, propylene glycol, and other flavorings. Vapor is produced when heated liquid, such as e-liquid, is turned into a vapor. This vapor can be inhaled and exhaled in a manner similar to smoking a traditional cigarette, which is why vapor has become an alternative to traditional smoking.
To learn more about vapor
https://brainly.com/question/422363
#SPJ4
What are the products of the following reaction?
OCH2CH2OH excess HBr--> heat
O Br - OCH2CH2Br
O Br + BrCH2CH2OH
O OH + BrCH2CH2Br
O Br + BrCH2CH2Br
The products of the reaction of OCH2CH2OH with excess HBr under heat are: OCH2CH2Br (2-bromoethanol) and BrCH2CH2OH (1-bromo-1-propanol)
The mechanism for the reaction of OCH2CH2OH with excess HBr under heat is a multi-step process that involves the formation of a carbocation intermediate. Step 1: Protonation of the oxygen atom in OCH2CH2OH by HBr to form a good leaving group (OH) and a carbocation intermediate.
Step 2: Bromine atom from HBr attacks the positively charged carbon of the carbocation intermediate to form a covalent bond, resulting in the formation of intermediate compound.Step 3: Deprotonation of the intermediate compound by the remaining hydroxyl group to give OCH2CH2Br (2-bromoethanol) and HBr
Step 4: the HBr molecule from the step 3 could protonate another molecule of OCH2CH2OH and repeat the step 1 to 3 to form BrCH2CH2Br (1-bromo-1-propanol) as second product.
Overall, the reaction is an electrophilic substitution reaction, with HBr as the electrophile and the oxygen atom of the alcohol as the nucleophile.
Learn more about compound here:
https://brainly.com/question/3648919
#SPJ4
A ring stand is used to ________ devices during laboratory procedures.
A ring stand is used to hold glassware devices during laboratory procedures.
Ring stands and accessories can make your lab experiments much easier if you are studying chemistry or physics.
A ring stand and its accessories are versatile pieces of equipment that will improve your hands-on activities by allowing you to conveniently heat beakers, flasks, test tubes, and other glassware over an alcohol burner, as well as set up physics apparatus such as moveable pulleys and inclined planes.
Each accessory is supported by a heavy base and an upright rod on the ring stand. To support additional equipment, a ring support is attached to the stand. Glassware is supported above an alcohol burner by wire gauze resting on the ring. To support funnels, crucibles, and evaporating dishes, the triangle rests on the ring. Burettes and test tubes are held in the burette clamp.
Know more about Ring Stand here:
https://brainly.in/question/13111005