Answer:
2.9m/s and 140N
Explanation:
For speed convert rev/s to m/s
(Rev/8s)=(2π/8)(5m) = 3.9m/s
For Centripetal Force
Fc = (ac)(m) = (v^2/r)(m) = [(3.9m/s)^2/(5.0m)][45kg] = 140N
Answers go to two significant figures.
What is the purpose of the Bill of Rights?
to inspire the governments of other nations
to limit the rights of individual citizens
to explain the procedure for amending the Constitution
to guarantee freedoms that belong to every citizen
Answer:
i think it is To limit the rights of individual citizens
Explanation:
why does the force of air resistance affect the motion of a person traveling at high speed more than a person walking across the room?
Answer:
yes .
Explanation:
...
;-; :) have a good day
Answer:
because on air the speed is high compared to walking
a ball of diameter 10 cm and mass 10 grams is dropped in a container of water. the cross sectional area of the container is 100 cm2.. what is the change in the height of the water column
Answer:
h = 9.83 cm
Explanation:
Let's analyze this interesting exercise a bit, let's start by comparing the density of the ball with that of water
let's reduce the magnitudes to the SI system
r = 10 cm = 0.10 m
m = 10 g = 0.010 kg
A = 100 cm² = 0.01 m²
the definition of density is
ρ = m / V
the volume of a sphere
V = [tex]\frac{4}{3} \ \pi r^{3}[/tex]
V = [tex]\frac{4}{3}[/tex] π 0.1³
V = 4.189 10⁻³ m³
let's calculate the density of the ball
ρ = [tex]\frac{0.010}{4.189 \ 10^{-3} }[/tex]
ρ = 2.387 kg / m³
the tabulated density of water is
ρ_water = 997 kg / m³
we can see that the density of the body is less than the density of water. Consequently the body floats in the water, therefore the water level that rises corresponds to the submerged part of the body. Let's write the equilibrium equation
B - W = 0
B = W
where B is the thrust that is given by Archimedes' principle
ρ_liquid g V_submerged = m g
V_submerged = m / ρ_liquid
we calculate
V _submerged = 0.10 9.8 / 997
V_submerged = 9.83 10⁻⁴ m³
The volume increassed of the water container
V = A h
h = V / A
let's calculate
h = 9.83 10⁻⁴ / 0.01
h = 0.0983 m
this is equal to h = 9.83 cm
If you want to delay a pulse of light in a laser experiment, you can send the light through a long coil of fiber optic cable. Light travels somewhat slower in the glass core of a fiber than it does in vacuum. We will approximate the speed of light in the fiber as 2.04 x 108 m/s. What length of fiber (in meters) should you use if you want to delay the arrival of light by 557 ns
Answer:
d = 113.6 m
Explanation:
For this exercise, the first thing we must notice is that the speed of the laser beam in the fiber is constant, so we can use the uniform motion relationships to find the necessary distance
v = d / t
let's reduce to SI units
t = 557 ns = 557 10⁻⁹ s
d = v t
d = 2.04 10⁸ 557 10⁻⁹
d = 1.136 102 m
d = 113.6 m
This is the distance of the fiber for the laser to arrive with the desired delay
which is true about the way air flows
A. high pressure to low pressure
B. low pressure to high pressure
C. cold air to hot air
D. hot air to cold air
Answer:
A High-to-Low
Explanation:
its like water running down a hill.
let's say you hypothetically ran over someone with your car, and they are now under your car in between the front wheels and the back wheels, right, and they're stuck as in can't breathe type stuck, right, do you keep driving so they can breathe or do you let them chill under your car?
just curious...
question: is this actually hypothetical?
Explanation:
also just leave the car there go get some McDonald's or sum and come back and if they're still breathing then go ahead and move the car .
Answer:
the same thing the last guy said
Suppose that when spring was wound, 100J of work was done but 15J escaped to the surrounding as heat. The change in internal energy of the spring is?
Answer: 85J
Explanation:
From the question, we are informed that when spring was wound, 100J of work was done but 15J escaped to the surrounding as heat.
Therefore, the change in internal energy of the spring will be calculated as:
ΔU = q + w
where, q = -15J
w = 100J
ΔU = -15J + 100J
= 85J
how are hydrosphere, atmosphere, Biosphere, and Biosphere connected to one another
Explanation:
Such spheres are intimately connected. Many animals (biosphere), for example, migrate through to the sky, while groundwater (hydrosphere) also flows through the ground (lithosphere). The domains are actually so closely related that a shift in one globe always results in a shift in one or both of some other spheres.
A bicycle has a momentum of 36 kg•m/s and a velocity of 4 m/s. What is the mass of the bicycle?
Answer:
45kw45_32+675&453try to get it done
Answer:
A: 9 kg
Explanation:
on edge! hope this helps!!~ ∩(︶▽︶)∩
What is the relationship between force and momentum?
A. A force will always increase momentum
B. A force acting for a certain time results in a change in momentum
C. There is no relationship
D. It depends on the kind of force
Answer:
Explanation:
B
Help!! Help!!
Alcohol __ a person's respiration.
A. slows down
B. Increases
C. doesn't affect
Answer:
I think the answer is A. Slow down
Explanation:
How far will a 10N force pull a car if the work done is 20J?
How does the First Amendment affect religion in the United States?
A specific religion can not be manditory
There can be no religion in the United States
State employees cannot have a religion
The government has an official religion
Answer:
A
Explanation:
What are the units for measuring specific heat?
a. degrees Celsius per gram
b. joules per degrees Celsius
c. joules per gram degree Celsius
d. degrees Celsius per joule gram
Answer:
c. joules per gram degree Celsius
Explanation:
edg 2021
9 The friction between the car and the mud is equivalent to the__________________.
(a) Resultant force
(b) Drag force
(c) Equivalent force
(d) Stretch force
(e) None
If at some point in time an object has zero velocity and zero acceleration, what does that mean about its motion at the next instant
Answer:
Explanation:
Usually, when an object possesses 0 velocity, then the object is expected to be at rest. But like the popular saying, there's always an exception to every rule. There exists cases in which an object isn't at rest, but possesses 0 speed or velocity. Since acceleration is the rate of change of velocity with time, the acceleration becomes negative, instead of positive.
Again, when the acceleration becomes zero, it means that the object isn't moving or it has no speed. And thus, the body is at rest. Every moving body as an acceleration, either positive, or negative. Zero acceleration means the object is at rest, and not moving at all.
Please leave a like if it helped you
At any point in time, when
when the acceleration becomes zero, it means that the object isn't moving or it has no speed. And thus, the body is at rest.
What is acceleration?Acceleration is defined as the change of the velocity with the time. Acceleration is a vector quantity and is defined by both the magnitude and the direction
when the acceleration becomes zero, it means that the object isn't moving or it has no speed. And thus, the body is at rest. Every moving body as an acceleration, either positive, or negative. Zero acceleration means the object is at rest, and not moving at all.
Now If an object is moving with an acceleration that causes its speed to be reduced, there will be a moment in which it reaches v = 0, but this doesn't necessarily mean that the acceleration isn't acting anymore. If the object continues its movement with the same acceleration, it's velocity will become negative.
If you throw an object in the air with a certain velocity, it will move vertically, reducing its velocity in a 9,8 rate (which is the acceleration caused by gravity). At a certain point, the object will reach its maximum height, and will start to fall. In the exact moment that it reaches the maximum height, before it starts falling, its velocity is zero, but gravity is still acting on the object (this is the reason why it starts falling instead of just being stopped at that point). Therefore, at that point, the object has zero velocity but an acceleration of 9,8 .
To know more about acceleration follow
brainly.com/question/25749514
A water molecule has 2 hydrogen atoms and 1 oxygen atom. If you were to add an additional oxygen atom to the molecule, would it still be water? If not, what would it be?
Answer:
No, it would not still be water. it would be hydrogen peroxide
Explanation:
water is [tex]H_{2} O[/tex]. Adding another oxygen would make it [tex]H_{2} O_{2}[/tex], which is hydrogen peroxide
Answer:
It would be Hydrogen peroxide
Explanation:
Atoms actually prefer being configured as water (H2O). Adding on the extra oxygen takes a lot of energy (and other chemicals). That's why we see lots of water and not much hydrogen peroxide around in nature. The reason hydrogen peroxide (H2O2) is dangerous is because it actually wants to drop off that extra oxygen and become water. Anything that does this is called an oxidising agent. An oxygen atom on it's own is pretty unstable and really wants to snatch up electrons from somewhere. First it'll probably gobble up some free floating hydrogen and make some more water with it. In our bodies we don't have much free floating hydrogen, so it runs out pretty quick. The oxygen atom army then has to start breaking up bigger molecules to steal the hydrogens and sometimes even the nitrogens. This breaks up the molecules that form the structures of your body and leaves you with a jumble of random configurations of atoms where the oxygen atoms passed through. Now, before you ask, normally oxygen doesn't do it to you because it exists in the air as O2, bonded to itself. The isolated oxygen atoms only exist for a brief time after they've split up from the hydrogen peroxide.
(BRAINLIEST)
Which is an example of the force of attraction between two objects that have mass?
Magnetism
Gravity
Solar energy
Electricity
(BRAINLIEST)
Answer:
Gravity
because it's factorised by mass of a body.
For other forces, they deal with charges of negligible mass and weights
Answer:
Gravity
Explanation:
There are 25 elements found in living things. How many of these elements are found in some organisms but not all?
1
6
19
25
Answer: 6
Explanation:
Of those 25 elements found in living things, 6 of them can be found in all of them. These 6 are very integral to life as when they combine, they make up cells, tissues and other body components.
These elements are: Carbon, Oxygen, Nitrogen, Hydrogen, Phosphorus and Sulfur. Their combinations can either create organic or inorganic compounds.
Answer:
19
Explanation:
i got 19... not sure if 6 is correct
Last week Tasha and Amy got into a fight at school. Tasha is accusing Amy of talking behind her back. Since the fight, Tasha has been
spamming Amy's social media profile with posts calling her a backstabber, a liar, and a cheat, among other things, Amy insists the matter was
all a misunderstanding, but some of her friends have started to turn against her.
In this situation Amy should try to confront Tasha face to face to sort the matter out. (5 points)
O True
O False
Answer:
True
Explanation:
Answer:
True
Explanation:
I feel that if she tries sorting it out herself that it could go two ways.
Water is found as a solid, liquid, and gas on ____.
An object has a mass of 20 kg and is placed 2 m above the ground. What is its gravitational potential energy? (PEg)
Answer:
392 JExplanation:
The potential energy of a body can be found by using the formula
PE = mgh
where
m is the mass
h is the height
g is the acceleration due to gravity which is 9.8 m/s²
From the question we have
PE = 20 × 9.8 × 2
We have the final answer as
392 JHope this helps you
How much power is used if a force of 35n is used to push a box a distance of 10 meters in 5 seconds ?
Answer:
pratyush the first boy984
Select the correct answer.
Which of these factors will increase the speed of a sound wave in the air?
A. slowing down the movement of particles in the air
B. raising the temperature of the air
C. removing particles form the air
D. decreasing the kinetic energy of the air
E. stopping particle collisions in the air
Answer:
B
Explanation:
But molecules at a higher temperature have more energy.
Answer: B. Raising the temperature of the air
the motion diagrams shown above represent cyclist 1 in the third panel above?
Answer:
A
Explanation:
Change of velocity is defined as acceleration and acceleration accounts for both change is direction and speed
A slide projector projects images on a screen. a) If the slide is 15.5 cm from the lens and the lens has a focal length of 15 cm, how far away is the screen
Answer:
[tex]d_{i}=465 cm=4.65 m[/tex]
Explanation:
Using the thin lens equation, we have:
[tex]\frac{1}{f}=\frac{1}{d_{o}}+\frac{1}{d_{i}}[/tex]
Where:
f is the focal length
d(o) is the distance of the object
d(i) is the distance of the image
[tex]\frac{1}{15}=\frac{1}{15.5}+\frac{1}{d_{i}}[/tex]
[tex]\frac{1}{15}-\frac{1}{15.5}=\frac{1}{d_{i}}[/tex]
[tex]d_{i}=465 cm=4.65 m[/tex]
Therefore, the screen is at 465 cm.
I hope it helps you!
A 1.5kg object moving with a speed of 2.5m/s strikes a wall and the ball rebounds with a speed of 1.5m/s. The ball is in contact with the wall for 0.045s. What is the magnitude of the average force exerted on the ball by the wall?
Answer:
F = 133.33[N]
Explanation:
This problem can be solved by the principle of momentum conservation, which tells us that momentum is preserved before and after the bounce of the ball on the wall.
In such a way that the movement towards the wall we will take it with a positive sign, and the force of the rebound to the left as negative. The movement to the left will be taken as a negative sign.
[tex]m_{1}*v_{1}-F*t=-m_{1}*v_{2}[/tex]
where:
m₁ = mass of the object = 1.5 [kg]
v₁ = velocity of the ball before hitting the wall = 2.5 [m/s]
F = average force [N]
t = time contact = 0.045 [s]
v₂ = velocity of the ball after hitting the wall = 1.5 [m/s]
Now replacing:
[tex](1.5*2.5)-F*0.045=-(1.5*1.5)\\3.75+2.25=F*0.045\\F=6/0.045\\F=133.33[N][/tex]
A particular inductor is connected to a circuit where it experiences a change in current of 0.8 amps every 0.10 sec. If the inductor has a self-inductance of 2.0 V, what is the inductance
Answer:
0.4
Explanation:
Given that a particular inductor is connected to a circuit where it experiences a change in current of 0.8 amps every 0.10 sec. If the inductor has a self-inductance of 2.0 V, what is the inductance
Using the power formula
P = IV
Substitute all the parameters
P = 0.8 × 2
P = 1.6 W
But P = I^2 R
Substitute power and current
1.6 = 0.8^2 R
R = 1.6 / 0.64
R = 2.5 ohms
Inductance = reciprocal of resistance
Inductance = 1 / 2.5
Inductance = 0.4
Please answer the questions... I will surely mark you as the brainliest according to me :)
Answer:
(a) You can tell that have the same strength because they have attracted the same amount of paper clips.
(b) Iron is used in electromagnets because steel retained magnetic properties after the power was turned off, but in the iron, the paper clips dropped off right away.
Three displacements are A = 200 m due south, B %3D 0 m due west, and C = 150 m at 30.0° cast of north. %3D Construct a separate diagram for each of the following possible ways of adding these vectors: R = A +B - č, Explain what R = B + C + A; R =C + B + A %3D you can conclude from comparing the diagrams.
Answer:
a) The diagrams can be seen in the picture attached
(b) By comparing the diagrams we can conclude that the resultant R₁ = R₂ = R₃
Further explanation
Vector is quantity that has magnitude and direction.
One example of a vector is acceleration.
Acceleration is rate of change of velocity.
a = acceleration ( m/s² )
v = final velocity ( m/s )
u = initial velocity ( m/s )
t = time taken ( s )
d = distance ( m )
Let us now tackle the problem !
This problem is about Vector and Vector Diagram.
Given:
Vector A = -200 j
Vector B = -250 i
Vector C = (150 sin 30.0°) i + (150 cos 30.0°) j = 75 i + 75√3 j
Unknown:
R₁ = A + B + C = ?
R₂ = B + C + A = ?
R₃ = C + B + A = ?
Solution:
R₁ = A + B + C = (-200 j) + (-250 i) + (75 i + 75√3 j)
R₁ = -175i + (75√3 - 200)j
R₂ = B + C + A = (-250 i) + (75 i + 75√3 j) + (-200 j)
R₂ = -175i + (75√3 - 200)j
R₃ = C + B + A = (75 i + 75√3 j) + (-250 i) + (-200 j)
R₃ = -175i + (75√3 - 200)j
From the results above, it can be concluded that the resultants above produce the same results. This can be confirmed from the diagrams in the attachment.
Explanation: