Answer:
The correct answer is C: 3484 ml
Question 7 of 10
The bonds of the products store 22 kJ more energy than the bonds of the
reactants. How is energy conserved during this reaction?
A. The reaction creates 22 kJ of energy when bonds form.
B. The surroundings absorb 22 kJ of energy from the reaction
system.
C. The reaction system absorbs 22 kJ of energy from the
surroundings.
D. The reaction uses up 22 kJ of energy when bonds break
The total energy of the system remains constant, and energy is conserved. Option A.
Conservation of energyAccording to the law of conservation of energy, energy cannot be created or destroyed, it can only be transformed from one form to another.
In this case, the excess 22 kJ of energy is stored in the chemical bonds of the products when they are formed. The energy comes from the chemical bonds of the reactants, which break during the reaction and release energy.
Therefore, the total energy of the system remains constant, and energy is conserved.
Option B is incorrect because the surroundings cannot absorb energy from the reaction system without an external source of energy.Option C is incorrect because the reaction system cannot absorb energy from the surroundings without an external source of energy.Option D is incorrect because the breaking of bonds requires energy to be inputted, not the energy to be used up.More on bond energy can be found here: https://brainly.com/question/26141360
#SPJ1
The deltaG for the reaction below implies that the decomposition of H2O2 is thermodynamically favorable. However, H2O2 is typically stable for up to a year when stored in a dark bottle at 298K. The best explanation for this observation is the decomposition reaction
2H2O2 (aq) ⇒2H2O (l) +O2 (g) ΔG°= -234 KJ/molrxn
A. is only thermodynamically favored in the presence of a catalyst
B. occurs with an increase in entropy because O2 is a product
C. is reversible and H2O2 is produced almost as fast as it decomposes
D. has a slow rate at 298 K because the activation energy is relatively high
the stability of hydrogen peroxide under normal storage conditions despite its negative ΔG° for decomposition can be attributed to the relatively high activation energy required for the reaction to occur.
How to solve the question?
The fact that the ΔG° for the decomposition of hydrogen peroxide (H2O2) is negative (-234 KJ/molrxn) indicates that the reaction is thermodynamically favorable, meaning that the products (water and oxygen gas) are more stable than the reactant (hydrogen peroxide). However, as mentioned in the question, hydrogen peroxide is typically stable for up to a year when stored in a dark bottle at 298K, which seems to contradict the thermodynamic prediction.
The best explanation for this observation is option D: the decomposition of hydrogen peroxide has a slow rate at 298 K because the activation energy is relatively high. Even though the reaction is thermodynamically favorable, it may not occur spontaneously at room temperature because the activation energy required to break the O-O bond in hydrogen peroxide is relatively high. This means that a significant amount of energy is needed to initiate the reaction and form the products, and at room temperature, the rate of the reaction is too slow for any significant decomposition to occur over a period of one year.
Additionally, the reaction is not reversible (option C) because the entropy of the system decreases due to the formation of liquid water from hydrogen peroxide and the release of oxygen gas. Option A is also incorrect because the decomposition of hydrogen peroxide does not require a catalyst to occur, although a catalyst can increase the rate of the reaction by lowering the activation energy.
In summary, the stability of hydrogen peroxide under normal storage conditions despite its negative ΔG° for decomposition can be attributed to the relatively high activation energy required for the reaction to occur.
To know more about thermodynamics visit :-
https://brainly.com/question/419265
#SPJ1
PLS HELP!!!!!
Convert the following measurements. Show all work, including units that cancel.
8.5x10^24 molecules NO2 -> mol
Answer:
Explanation:
8.5x10^24molecules x[tex]\frac{1 mol}{6.022x10^2^3 molecules}[/tex] = 14.1 moles NO2
Original unit of molecules cancels with the conversion unit of molecules = moles and you are left with moles as your final unit.
Specific Heat of Metals Lab 5. What assumptions do we make in this lab about heat transfers? 6. What happens if the assumptions you made in the above question are false? 7. What are some sources of error and how did they affect your data and results? 8. Which metal has the highest specific heat capacity? What does that mean about th metal?
Assumptions made in the lab about heat transfers (Question 5):
1. The specific heat capacity of the metal being tested is constant and does not change with temperature.
2. The heat transfer between the metal sample and the surroundings is only due to conduction, and other modes of heat transfer such as convection or radiation are negligible.
3. The heat lost or gained by the metal sample is fully absorbed or released by the water in the calorimeter and the calorimeter itself has negligible heat capacity.
4. There is no heat exchange with the surrounding environment, and the calorimeter is perfectly insulated.
Consequences of false assumptions (Question 6):
If any of the above assumptions are false, it could affect the accuracy of the results obtained in the lab. For example:
1. If the specific heat capacity of the metal being tested changes with temperature, it could lead to inaccurate measurements of heat transfer and calculated specific heat capacity values.
2. If convection or radiation is not negligible, it could result in additional heat transfer between the metal sample and the surroundings, leading to inaccurate results.
3. If the calorimeter has significant heat capacity or there is heat exchange with the surrounding environment, it could affect the measurement of heat transfer and calculated specific heat capacity values.
Sources of error and their effects on data (Question 7):
1. Measurement errors: Errors in measuring the initial and final temperatures of the metal sample and water, or the mass of the metal sample and water, could affect the accuracy of calculated specific heat capacity values.
2. Heat loss or gain to the environment: If there is heat exchange with the surrounding environment during the experiment, it could result in inaccurate measurements of heat transfer and specific heat capacity values.
3. Assumption violations: If any of the assumptions mentioned earlier are not valid, it could affect the accuracy of the results obtained in the lab.
Metal with highest specific heat capacity (Question 8):
The metal with the highest specific heat capacity would be the one that requires the most amount of heat energy to raise its temperature by a given amount compared to the other metals tested in the lab. The metal with the highest specific heat capacity would have a larger value of specific heat capacity, indicating that it can absorb more heat energy per unit mass per unit temperature change compared to the other metals. This means that the metal with the highest specific heat capacity can store more heat energy without experiencing a significant increase in temperature, and it has a greater ability to resist changes in temperature when heat is added or removed.
A researcher is studying gold complexes. She makes a 125mL solution of gold (III) chloride by dissolving 0.144 moles of the solute into water. Which of the following would cause the concentration of the solution to increase?
A additional gold (III) chloride is added to the baker
B part of the solution is poured into the chemical waste.
C water is added to the beaker
D we do not have enough information to answer this question.
Adding more gold (III) chloride to the beaker would increase the number of moles of solute in the solution while keeping the volume of the solution constant, option A is correct.
Adding more solute (gold (III) chloride) to a fixed volume of solvent (water) increases the concentration of the solution would result in an increase in the concentration of the solution.
The concentration of a solution is defined as the amount of solute dissolved in a given amount of solvent. When more solute is added to the solution, the amount of solute per unit volume of the solution increases, leading to an increase in concentration, option A is correct.
To learn more about chloride follow the link:
https://brainly.com/question/13211879
#SPJ1
750mL of water (initially at 20°C) is mixed with an unknown mass of iron (initially at 120°C). When thermal equilibrium is reached, the system has a temperature of 30°C. Find the mass of the iron. Heat capacity of iron is 0.46 J/g°C.
The mass of the iron is 17.64 kg.
To solve this problem, we need to use the principle of heat transfer, which states that the total heat gained by one object must be equal to the total heat lost by the other object when they are in thermal equilibrium.
Let's start by calculating the heat lost by the iron and the heat gained by the water. We can use the following formula:
Q = m×c×ΔT
where Q is the heat transferred, m is the mass of the object, c is its specific heat capacity, and ΔT is the temperature change.
Heat lost by iron = Heat gained by the water
[tex]m_{iron}[/tex] x [tex]c_{iron}[/tex] x ( [tex]T_{f}[/tex] - [tex]T_{i}[/tex] ) = [tex]m_{water}[/tex] x [tex]c_{water}[/tex] x ( [tex]T_{f}[/tex] - [tex]T_{i}[/tex] )
where [tex]T_{f}[/tex] is the final temperature of the system (30°C), [tex]T_{i}[/tex] is the initial temperature of each substance (120°C for the iron and 20°C for the water), [tex]c_{iron}[/tex] and [tex]c_{water}[/tex] are the specific heat capacities of iron and water, respectively.
We need to solve for [tex]m_{iron}[/tex], which is the unknown mass of iron. Rearranging the equation, we get:
[tex]m_{iron}[/tex] = ([tex]m_{water}[/tex] x [tex]c_{water}[/tex] x ([tex]T_{f}[/tex] - [tex]T_{i}[/tex] )) / ([tex]c_{iron}[/tex] x ([tex]T_{i}[/tex] - [tex]T_{f}[/tex] ))
Substituting the given values, we get:
[tex]m_{iron}[/tex]= (750g x 4.18 J/g°C x (30°C - 20°C)) / (0.45 J/g°C x (120°C - 30°C))
[tex]m_{iron}[/tex]= 17,640 g = 17.64 kg (to two decimal places)
Therefore, the mass of the iron is 17.64 kg.
To learn more about iron mass calculation visit:
brainly.com/question/14143857
A beaker with 2.00×102 mL of an acetic acid buffer with a pH of 5.000 is sitting on a benchtop. The total molarity of acid and conjugate base in this buffer is 0.100 M . A student adds 6.90 mL of a 0.300 M HCl solution to the beaker. How much will the pH change? The pKa of acetic acid is 4.740.
Answer: The pH will decrease by 0.109 units.
Explanation:
To solve this problem, we will need to use the Henderson-Hasselbalch equation:
pH = pKa + log([A-]/[HA])
where pH is the initial pH of the buffer, pKa is the acid dissociation constant of acetic acid, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the acid.
First, we need to find the initial concentrations of [A-] and [HA] in the buffer. Since the total molarity of acid and conjugate base is 0.100 M and we know the volume of the buffer, we can use the following equation:
moles of acid = moles of conjugate base
0.100 M x 2.00x10^-2 L = [HA] x 2.00x10^-2 L
[HA] = 0.100 M
Since we know the pH of the buffer, we can use the following equation to find the concentration of the conjugate base:
pH = pKa + log([A-]/[HA])
5.000 = 4.740 + log([A-]/0.100)
[A-]/[HA] = 10^(5.000-4.740)
[A-]/[HA] = 1.995
[A-] = 1.995 x 0.100 M = 0.1995 M
Now, we need to find the new concentrations of [A-] and [HA] after the addition of HCl. Since the volume of the buffer is now 2.069x10^-2 L (2.00x10^-2 L + 6.90x10^-3 L), we can use the following equation:
moles of acid + moles of HCl = moles of conjugate base
0.100 M x 2.00x10^-2 L + 0.300 M x 6.90x10^-3 L = [HA] x 2.069x10^-2 L
[HA] = 0.1295 M
The concentration of the conjugate base can be found using the equation:
[A-]/[HA] = 10^(pH-pKa)
1.891 = 10^(pH-4.740)
pH-4.740 = log(1.891)
pH = log(1.891) + 4.740
pH = 5.000 - 0.109
Therefore, the pH will decrease by 0.109 units.
A compound containing only sulfur and phosphorus is 50.9% S by mass; the molar mass is 252 g/mol. What are the empirical and molecular formulas of the compound?
The empirical formula of the compound is S₁P₁, and the molecular formula is S₄P₄.
What is the difference between empirical and molecular formulas?The empirical formula gives the simplest whole-number ratio of atoms in a compound, whereas the molecular formula gives the actual number of atoms of each element in a molecule of the compound.
How did you determine the molecular formula of the compound from the empirical formula and molar mass?The molecular formula can be found by dividing the molar mass of the compound by the empirical formula mass and rounding the result to the nearest whole number. The resulting number gives the subscript in the molecular formula.
To determine the empirical formula of the compound, we need to convert the mass percentages into mole ratios.
Assuming a 100 g sample of the compound, there would be 50.9 g of sulfur and 49.1 g of phosphorus.
The moles of sulfur can be calculated as: moles of S = (50.9 g S) / (32.06 g/mol S) = 1.588 mol S
The moles of phosphorus can be calculated as: moles of P = (49.1 g P) / (30.97 g/mol P) = 1.585 mol P
To find the empirical formula, we need to divide both the number of moles of sulfur and phosphorus by the smallest of the two.
So, the empirical formula is: S₁P₁
To determine the molecular formula, we need to know the molar mass of the compound. The given molar mass is 252 g/mol.
The empirical formula mass can be calculated as:
S₁P₁ = 1 x 32.06 g/mol S + 1 x 30.97 g/mol P = 63.03 g/mol
To find the molecular formula, we need to divide the molar mass of the compound by the empirical formula mass:
molecular formula mass / empirical formula mass = n
252 g/mol / 63.03 g/mol = 3.993
Round this to the nearest whole number to get the subscript in the molecular formula: S₄P₄
Learn more about empirical formula here:
https://brainly.com/question/14044066
#SPJ1
CAN SOMEONE HELP WITH THE HESS'S LAW?
WHAT DO YOU THINK IS THE LARGEST SOURCE OF ERROR IN THE EXPERIMENT OF HESS'S LAW? EXPLAIN THE ANSWER
The largest source of error in the experiment of Hess's Law is human error.
What is experiment?An experiment is a procedure carried out to test a hypothesis, or an educated guess, in order to support or reject it. Experiments are conducted in order to explore new phenomena, or to verify and validate existing theories or laws. Experiments provide insight into cause-and-effect by demonstrating what outcome occurs when a particular factor is manipulated. Experiments vary greatly in goal and scale, but all share the same basic structure. They begin with a hypothesis, or an educated guess, that is then tested with an experiment. Results are measured and analyzed and conclusions are drawn, based on the results of the experiment.
This includes miscalculations when measuring, recording and interpreting data, making mistakes when setting up the experiment, or misreading the results. Also, inaccurate or faulty equipment used in the experiment can lead to errors. Another potential source of error is the presence of impurities in the reactants, which can alter the reaction enthalpies and thus the results of the experiment.
To learn more about experiment
https://brainly.com/question/24795637
#SPJ1
How many moles of methane gas will combust to produce 330 grams of water? Answer should be rounded to the appropriate number of significant figures and have the correct unit.
Answer:
The balanced chemical equation for the combustion of methane gas (CH4) is:
CH4 + 2O2 → CO2 + 2H2O
From the equation, we can see that for every mole of methane gas that reacts, 2 moles of water are produced.
The molar mass of water (H2O) is 18.01528 g/mol.
To determine the number of moles of water produced by 330 g of water, we can use the following equation:
moles = mass/molar mass
moles of water = 330 g / 18.01528 g/mol = 18.3276 mol
Since the ratio of methane to water in the balanced equation is 1:2, we know that for every mole of water produced, half a mole of methane is consumed.
moles of methane = 0.5 x moles of water = 0.5 x 18.3276 mol = 9.1638 mol
Therefore, 9.16 moles of methane gas will combust to produce 330 grams of water.
The solubility of PbBr2 is 0.427 g per 100 mL of solution at 25°C. Determine the value of the solubility product constant for this strong electrolyte. Lead(II) bromide does not react with water.
The value of the solubility product constant for PbBr2 at 25°C is 6.70 × [tex]10^-^6[/tex]. It is important to note that lead (II) bromide does not react with water because it is a strong electrolyte.
PbBr2 (s) ⇌ Pb2+ (aq) + 2Br- (aq)
The solubility of (lead)PbBr2 is given as 0.427 g per 100 mL of solution at 25°C. One can convert this to moles per liter using the molar mass of PbBr2, which is 367.01 g/mol:
0.427 g PbBr2 × (1 mol PbBr2 / 367.01 g PbBr2) × (10 / 1 L) = 0.0116 mol/L
[Pb2+] = 0.0116 mol/L
[Br-] = 2 × 0.0116 mol/L = 0.0232 mol/L
Substituting these values into the expression for Ksp
Ksp = [Pb2+][Br-]2
= (0.0116 mol/L)(0.0232 mol/L)2
= 6.70 × [tex]10^-^6[/tex]
Learn more about molar solubility here.
https://brainly.com/question/31503670
#SPJ1
Yolanda is focusing on eccentric contractions during her workout today. How is this MOST likely demonstrated in her workout?
How many aluminum atoms are in 25g of aluminum
Answer: 5.58x10^23 atoms of Al
Explanation:
Here's the math:
I converted grams to mols then mols to atoms.
Standard temperature and pressure (STP) is a standard set of conditions used for comparing properties of different gases and corresponds to a temperature of 0°C and approximately atmospheric pressure at sea level (100 kPa)
true or false
True. Standard temperature and pressure (STP) is a standard set of conditions used for comparing properties of different gases.
How is the above statement true?A set of standardized settings known as standard temperature and pressure (STP) is used to compare the characteristics of various gases. The standard pressure is approximately atmospheric pressure at sea level, which is equal to 101.325 kPa or 1 atmosphere, while the standard temperature is 0°C or 273.15 K. (atm). When comparing the physical characteristics of various gases, such as molar volume, density, and compressibility, STP is frequently used in physics and chemistry to determine how gases behave under normal conditions. It is crucial to remember that STP is not a set of rigid requirements, and various companies may specify STP using slightly varying numbers for temperature and pressure.
Learn more about molar volume here:
brainly.com/question/29884686
#SPJ1
Please and thank you
The equilibrium molarity of (SO4)2- ion is 0.00051 M.
The equilibrium molarityThe sulfuric acid (H2SO4) dissociates in water as follows:H2SO4 + H2O ⇌ H3O+ + HSO4-HSO4- ⇌ H+ + SO42-
Therefore, the equilibrium molarity of (SO4)2- ion can be determined by first calculating the concentration of H+ ions formed in the solution due to the dissociation of H2SO4.
For the given solution with a concentration of 0.043 M sulfuric acid, the initial concentration of H2SO4 is also 0.043 M.
Using the first dissociation equation:
[H2SO4] = [H3O+] + [HSO4-]
At equilibrium, assuming x moles of H+ ions and HSO4- ions are formed:
[H2SO4] = (0.043 - x) M[H3O+] = x M[HSO4-] = (0.043 - x) M
Using the second dissociation equation:[HSO4-] = [H+] * [SO42-] / Ka2
where Ka2 is the dissociation constant for the second dissociation of sulfuric acid.
From the ALEKS Data resource, Ka2 for sulfuric acid is
1.2 × 10^-2.
Substituting the values:
(0.043 - x) = x * [SO42-] / Ka2
Rearranging:
[SO42-] = (0.043 - x) * Ka2 / x
At equilibrium, the concentration of (SO4)2- ion is given by:[SO42-] = (0.043 - x) * Ka2 / x
Substituting the equation from the first dissociation:
[SO42-] = (0.043 - x) * Ka2 / x
[SO42-] = (0.043 - x) * 1.2 × 10^-2 / x
Simplifying:[SO42-] = 0.000516 - 0.012x
To solve for x, the quadratic equation:
x^2 + Ka2x - Ka2[HSO4-]initial = 0 can be used,
where [HSO4-]initial is the initial concentration of HSO4- ions, which is 0.043 M.
Solving the quadratic equation gives x = 4.4 × 10^-4 M.
Therefore, the equilibrium concentration of (SO4)2- ion is:
[SO42-] = 0.000516 - 0.012x
[SO42-] = 0.000516 - 0.012(4.4 × 10^-4)
[SO42-] = 0.000510 M
Rounding off to 2 significant figures, the equilibrium molarity of (SO4)2- ion is 0.00051 M.
Learn more on equilibrium molarity here
https://brainly.com/question/8732513
#SPJ1
(15 pts!) Match the following items with the correct descriptions.
1. releases hydrogen ions
two
2. accepts hydrogen ions
eight
3. poor conductor of electricity
base
4. shiny and lustrous
acid
5. maximum number of electrons in first shell
nonmetal
6. maximum number of electrons in second shell
metal
Balance [tex]Fe + O_{2} = Fe_{2}O[/tex] and calculate how many molecules [tex]Fe_{2}O[/tex] has if given 3.5 g Fe or 2.28 g [tex]O_{2}[/tex] (do both).
Balancing equation [tex]Fe + O_2 = Fe_2O: 4 Fe + 3 O_2 = 2 Fe_2O_3[/tex]
The number of molecules of [tex]Fe_2O[/tex] produced from 3.5 g of Fe:
[tex]1.88 * 10^{22} molecules[/tex] and from 2.28 g [tex]O_2[/tex] is [tex]2.86 * 10^{22[/tex] molecules.
We need to first convert mass of Fe to moles, using its molar mass 55.85 g/mol:
moles of Fe [tex]= 3.5 g / 55.85 g/ mol = 0.0626\ mol[/tex]
We can see that 2 moles of [tex]Fe_2O[/tex] are produced for every 4 moles of Fe, or equivalently, 1 mole [tex]Fe_2O[/tex] is produced for every 2 moles Fe.
Therefore, the number of moles of [tex]Fe_2O[/tex] produced from 0.0626 mol of Fe is:
moles of [tex]Fe_2O[/tex] = 0.0626 mol / 2 = 0.0313 mol
We can use Avogadro's number:
[tex]1 mol = 6.022 * 10^{23}\ particles[/tex]
number of molecules [tex]Fe_2O[/tex] =[tex]0.0313\ mol * 6.022 * 10^{23[/tex]
molecules/mol = [tex]1.88 * 10^{22[/tex] molecules
Converting mass of [tex]O_2[/tex] to moles:
moles of [tex]O_2[/tex] =[tex]2.28 g / 32.00 g/mol = 0.0713 mol[/tex]
Number of moles of [tex]Fe_2O[/tex] produced from 0.0713 mol of [tex]O_2[/tex] is:
moles of [tex]Fe_2O[/tex] =[tex]2/3 * 0.0713\ mol = 0.0475\ mol[/tex]
number of molecules of [tex]Fe_2O[/tex] = [tex]0.0475\ mol * 6.022 * 10^{23[/tex]
molecules =[tex]2.86 * 10^{22} molecules[/tex]
To know more about Avogadro's number, here
brainly.com/question/1445383
#SPJ1
What is the problems in contact process (sulphuric acids)
The problems in contact process are Catalyst Deactivation, Corrosion, Environmental Impact and Safety Concerns.
Explain the problems faced in contact process?The Contact Process is a widely-used method for producing sulfuric acid, which is one of the most important industrial chemicals. However, there are several problems associated with the Contact Process:
(1) Catalyst Deactivation: The Contact Process requires the use of a catalyst, typically vanadium pentoxide (V₂O₅), to increase the rate of the reaction. However, over time the catalyst can become deactivated due to impurities in the reactants or the formation of a coating on the catalyst surface. This can reduce the efficiency of the process and require expensive catalyst replacement.
(2) Corrosion: The reaction between sulfur dioxide (SO₂) and oxygen (O₂) to form sulfur trioxide (SO₃) is highly exothermic and produces heat, which can cause corrosion of the reaction vessel and associated equipment. This can lead to leaks, failures, and other safety hazards.
(3) Environmental Impact: The Contact Process produces large quantities of sulfur dioxide, which is a major contributor to acid rain and other environmental problems. In addition, the process consumes large amounts of energy and produces greenhouse gases, contributing to climate change.
(4) Safety Concerns: The Contact Process involves the handling of hazardous materials, including sulfur dioxide, sulfur trioxide, and sulfuric acid. These materials can pose significant health and safety risks to workers and the surrounding environment if not handled properly.
Learn more about catalyst here:
https://brainly.com/question/24430084
#SPJ9
Using your knowledge of the Brønsted-Lowry theory of acids and bases,
write equations for the following acid-base reactions and indicate each
conjugate acid-base pair:
in the reaction
MnO2 + 4HCl -> MnCl2 + 2H2O + Cl
[a] name the substance oxidised
[b] name the oxidising agent
[c] name the substance reduced
[d] name the reducing agent
Fifteen kg of iron (lll) oxide was used in a reaction to produce iron.calculate the mass of iron produced in this reaction
10.50 kg of iron will be produced from 15 kg of iron (III) oxide.
What is mass?The amount of matter in an item is measured by its mass, which is a fundamental physical quantity. It is a scalar amount that is measured in kilograms (kg) or grams (g). Regardless of an object's location or the force pressing against it, its mass always remains constant.
How do you determine it?Iron (III) oxide and elemental iron react chemically in the following balanced chemical equation:
2 Fe2O3+ 3 C = 4 Fe + 3 CO2
Due to the reaction between 2 moles of Fe2O3 and 4 moles of Fe, the mole ratio of Fe2O3 to Fe is either 2:4 or 1:2.
The amount of iron created from 15 kg of Fe2O3 can be calculated using this mole ratio:
Fe2O3 = 2 moles of Fe per mole.
Molecular weight of Fe2O3 is 159.69 g/mol.
Fe2O3 has a mass of 15 kg and a density of 15,000 g/mol, or 94.00 moles.
We can figure out how many moles of Fe were produced using the mole ratio of 1:2:
We can figure out how many moles of Fe were produced using the mole ratio of 1:2:
2 moles of Fe for each mole of Fe2O3 94.00 moles of Fe2O3 multiplied by (2 moles of Fe for each mole of Fe2O3) results in 188.00 moles of Fe.
The molar mass of Fe can then be used to convert the moles of iron to mass as follows:
Fe's molecular weight is 55.85 g/mol.
188.00 moles of Fe produced at a rate of 55.85 g/mol result in a mass of 10,499.80 g or 10.50 kg.
Hence, 10.50 kg of iron will be produced from 15 kg of iron (III) oxide.
To know more about mass, visit:
brainly.com/question/19694949
#SPJ1
In the first order "A -> products" reaction, initially [A] = 0.816 M, after 16.0 minutes it is [A] = 0.632 M. rate constant , what is the value of k ?
The first order reaction is defined by the rate law:
rate = k[A]
where k is the rate constant and [A] is the concentration of the reactant.
If we integrate this rate law, we get:
ln([A]_t/[A]_0) = -kt
where [A]_t is the concentration of A at time t, [A]_0 is the initial concentration of A, k is the rate constant, and t is time.
We can use this equation to solve for k given the initial and final concentrations of A and the time interval.
In this case, we have:
[A]_t = 0.632 M
[A]_0 = 0.816 M
t = 16.0 min
Substituting these values into the equation above, we get:
ln(0.632/0.816) = -k(16.0)
Solving for k, we get:
k = (1/16.0) * ln(0.816/0.632) = 0.0316 min^-1
Therefore, the value of the rate constant k for this first order reaction is 0.0316 min^-1.
[tex]\huge{\colorbox{black}{\textcolor{lime}{\textsf{\textbf{I\:hope\:this\:helps\:!}}}}}[/tex]
[tex]\begin{align}\colorbox{black}{\textcolor{white}{\underline{\underline{\sf{Please\: mark\: as\: brillinest !}}}}}\end{align}[/tex]
[tex]\textcolor{blue}{\small\texttt{If you have any further questions,}}[/tex] [tex]\textcolor{blue}{\small{\texttt{feel free to ask!}}}[/tex]
♥️ [tex]{\underline{\underline{\texttt{\large{\color{hotpink}{Sumit\:\:Roy\:\:(:\:\:}}}}}}\\[/tex]
A compound containing only sulfur and phosphorus is 50.9% S by mass; the molar mass is 252 g/mol. What are the empirical and molecular formulas of the compound?
There are 4 sulfur atoms and 2 phosphorus atoms in the compound. The molecular formula is then S4P2.
What is sulfur?Sulfur is a nonmetallic element that is essential for life. It is found in nature in several forms and has a variety of uses. Sulfur is an essential component of proteins and is found in all living organisms. It is also present in the cells of plants, animals, and humans, and is important for the functioning of enzymes and hormones.
The empirical formula of the compound is S2P. This is found by taking the mass of each element and dividing it by the atomic mass of the element, and then dividing that result by the smallest value. So, for sulfur, we divide 50.9% by 32.065 (the atomic mass of sulfur) to get 1.58, which is then divided by 1.58 to get 1. For phosphorus, we divide 49.1% by 30.9737 (the atomic mass of phosphorus) to get 1.58, which is then divided by 1.58 to get 1. The molecular formula of the compound is S4P2. This is found by taking the molar mass of the compound (252 g/mol) and dividing it by the molar mass of the empirical formula (2 x 32.065 + 1 x 30.9737) to get 4. This means there are 4 sulfur atoms and 2 phosphorus atoms in the compound. The molecular formula is then S4P2.
To learn more about sulfur
https://brainly.com/question/238762
#SPJ1
WILL GIVE BRANLIEST + 25 POINTS
Balance [tex]Fe+ O_{2} =Fe_2O[/tex] and calculate how many molecules [tex]Fe_2O[/tex] has if given 3.5 g Fe or 2.28 g [tex]O_2[/tex] (do both).
If given 3.5 g Fe, 1.88 × 10²² molecules of Fe₂O₃ are produced, and if given 2.28 g O₂, 2.86 × 10²² molecules of Fe₂O₃ are produced.
Balanced chemical equation for the reaction between iron (Fe) and oxygen (O₂) to form iron oxide (Fe₂O) is;
4Fe + 3O₂ → 2Fe₂O₃
To calculate how many molecules of Fe₂O₃ are produced from 3.5 g Fe or 2.28 g O₂, we need to use the molar mass of Fe and O₂ and the stoichiometry of the balanced equation.
Molar mass of Fe = 55.85 g/mol
Molar mass of O₂ = 32 g/mol
Using these values, we can calculate the number of moles of Fe and O₂;
Number of moles of Fe = 3.5 g / 55.85 g/mol = 0.0626 mol
Number of moles of O₂ = 2.28 g / 32 g/mol = 0.0713 mol
Now we can use the balanced equation to determine the number of moles of Fe₂O₃ produced;
4Fe + 3O₂ → 2Fe₂O₃
4 moles Fe produces 2 moles Fe₂O₃
So, the number of moles of Fe₂O₃ produced from 3.5 g Fe is;
0.0626 mol Fe × (2 mol Fe₂O₃ / 4 mol Fe) = 0.0313 mol Fe2O3
And the number of moles of Fe₂O₃ produced from 2.28 g O₂ is;
0.0713 mol O₂ × (2 mol Fe₂O₃ / 3 mol O₂) = 0.0475 mol Fe₂O₃
To calculate the number of molecules of Fe₂O₃, we can use Avogadro's number;
1 mole = 6.022 × 10²³ molecules
So, the number of molecules of Fe₂O₃ produced from 3.5 g Fe is;
0.0313 mol Fe₂O₃ × 6.022 × 10²³ molecules/mol = 1.88 × 10²² molecules
And the number of molecules of Fe₂O₃ produced from 2.28 g O₂ is;
0.0475 mol Fe₂O₃ × 6.022 × 10²³ molecules/mol
= 2.86 × 10²²molecules
To know more about iron oxide here
https://brainly.com/question/18500540
#SPJ1
Identify and discuss one common way of deciding that a reaction has occurred, and give an example.
Answer: Some signs that could be an indicator of a chemical reaction occurring are changes in color and temperature, the formation of gas, and precipitate.
Explanation: There is no single way to conclude that a reaction has occurred. Some reactions show changes in temperature and color, while others may form ppt. It varies for each and every reaction.
E.g. This reaction of Copper Sulphate with Sodium Hydroxide gives Copper Hydroxide ppt.
CuSO4 + 2 NaOH ------> Na2SO4 + Cu(OH)2 (ppt.)
To read more about chemical reactions:
https://brainly.in/question/2558491
What is matter? a. A change of state b. Anything that has mass and takes up space c. Both a and b d. None of the above
Answer: B
Explanation: Anything that has mass and takes up space
I NEED HELP! CHEMISTRY! PLEASE HELP ME!
Procedures:
Measure the mass of 2.5 mL of Lye (or ½ teaspoon of powdered lye)
If your scale is not accurate you can find the mass of a larger volume such as 25 mL and divide by 10.
Add 100.0 mL (½ cup) of vinegar to the calorimeter.
Measure the temperature of the vinegar (initial temperature)
Add 2.5 mL of Lye to the vinegar and record the highest temperature reached (final temperature).
Calculate the heat of this reaction, ∆H, using q = mc∆T (use the calculation steps below). ∆H = q
Determine the ∆H/mole of NaOH.
Your observations include the pertinent data and calculations from your experiment.
Record your observations here:
Specific heat of vinegar (c): 4.1 J/g oC
Density of vinegar: 0.99 g/mL
Mass of 2.5 mL (or ½ teaspoon) of lye:
Volume of vinegar:
Initial temperature of vinegar:
Final temperature of vinegar:
Energy gained by the contents of the calorimeter (q) = heat of the reaction (∆H)
q = mc∆T
Mass of 100.0 mL of vinegar (multiply by density of vinegar):
Mass of contents (vinegar + lye); this is m in our equation:
Change in temperature (Final – Initial), this is ∆T in our equation:
Energy gained by the calorimeter contents (this is q):
Moles of NaOH (assumes all of the lye is NaOH):
Value of ∆H in J/mole ( q / moles of NaOH):
To calculate the value of H in J/mole: H value in J/mole (q / moles NaOH): [q] / ([mass of 2.5 mL (or 12 teaspoon) lye] / 40.0 g/mol).
How to determine specific heat capacity?Based on the given procedures, record the following information:
Mass of 2.5 mL (or ½ teaspoon) of lye: [missing, needs to be measured]
Volume of vinegar: 100.0 mL
Initial temperature of vinegar: [measurement needed]
Final temperature of vinegar: [measurement needed]
Specific heat of vinegar (c): 4.1 J/g oC
Density of vinegar: 0.99 g/mL
To calculate the mass of 2.5 mL of lye, to measure it using a scale. Once we have that measurement, we can proceed with the calculations:
Mass of 2.5 mL (or ½ teaspoon) of lye: [measurement needed]
Volume of vinegar: 100.0 mL
Initial temperature of vinegar: [measurement needed]
Final temperature of vinegar: [measurement needed]
Specific heat of vinegar (c): 4.1 J/g oC
Density of vinegar: 0.99 g/mL
To calculate the energy gained by the contents of the calorimeter (q), we can use the formula q = mc∆T, where q is the energy gained, m is the mass of the contents (vinegar + lye), c is the specific heat capacity of vinegar, and ∆T is the change in temperature (final temperature - initial temperature):
Mass of 100.0 mL of vinegar (multiply by density of vinegar): 99.0 g
Mass of contents (vinegar + lye); this is m in our equation: 99.0 g + [mass of 2.5 mL (or ½ teaspoon) of lye]
Change in temperature (Final – Initial), this is ∆T in our equation: [Final temperature] - [Initial temperature]
Energy gained by the calorimeter contents (this is q): q = (99.0 g + [mass of 2.5 mL (or ½ teaspoon) of lye]) x 4.1 J/g oC x ([Final temperature] - [Initial temperature])
To calculate the moles of NaOH, we need to convert the mass of lye used to moles using the molar mass of NaOH (40.0 g/mol):
Moles of NaOH (assumes all of the lye is NaOH): [mass of 2.5 mL (or ½ teaspoon) of lye] / 40.0 g/mol
Finally, to determine the value of ∆H in J/mole, divide the energy gained by the calorimeter contents (q) by the moles of NaOH:
Value of ∆H in J/mole (q / moles of NaOH): [q] / ([mass of 2.5 mL (or ½ teaspoon) of lye] / 40.0 g/mol)
Find out more on specific heat capacity here: https://brainly.com/question/16559442
#SPJ1
An atom with 5 protons, 10 neutrons, and 10 electrons is
stable, +5 charge
unstable, -5 charge
unstable, +5 charge
unstable, -10 charge
An anatom with 5 protons, 10 neutrons, and 10 electrons is unstable and has a charge of +5. This is because the number of protons (positive charge) in the nucleus is greater than the number of electrons (negative charge) in the outer shell,resulting in a net positive charge. The excess positive charge makes the atom unstable and more likely to react with other atomsbor lose electrons to become a positively charged ion.
230 Calories = ______ Joules
Answer:
962.32 or 962320 if it's 4184j per cal
Explanation:
1cal = 4.184j
so 230cal is 962.32120cm3 of a gas at 25°c exerts a pressure of 750mmHg. calculate its pressure if its volume increased to 150cm3 at 40°c.
Answer:
P2 = 1125 mmHg
Explanation:
Gas Pressure Calculation
To solve this problem, we need to use the combined gas law, which relates the pressure, volume, and temperature of a gas under different conditions. The combined gas law is given by:
(P1V1)/T1 = (P2V2)/T2
where P1, V1, and T1 are the initial pressure, volume, and temperature of the gas, and P2, V2, and T2 are the final pressure, volume, and temperature.
Let's start by calculating the initial conditions:
P1 = 750 mmHg
V1 = 120 cm^3
T1 = 25°C + 273.15 = 298.15 K (temperature in Kelvin)
Now we can plug in these values and solve for P2:
(P1V1)/T1 = (P2V2)/T2
(750 mmHg x 120 cm^3) / 298.15 K = (P2 x 150 cm^3) / (40°C + 273.15)
Simplifying this equation, we get:
P2 = (750 mmHg x 120 cm^3 x (40°C + 273.15)) / (298.15 K x 150 cm^3)
P2 = 1125 mmHg
Therefore, the pressure of the gas would increase to 1125 mmHg if its volume increased to 150 cm^3 at 40°C.
ChatGPT