A 160 kg astronaut (including space suit) acquires a speed of 2.65 m/s by pushing off with his legs from a 1500 kg space capsule
PART A
- What is the change in speed of the space capsule?
- Express your answer with the appropriate units.
PART B
- If the push lasts t = 0.520 s , what is the average force exerted by each on the other? As the reference frame, use the position of the capsule before the push.
- Express your answer with the appropriate units.
PART C
- What is the kinetic energy of the astronaut after the push?
- Express your answer with the appropriate units.
PART D
- What is the kinetic energy of the space capsule after the push?
- Express your answer with the appropriate units.

The average power output of the dragster is 58,767.12 watts (W) or 78.81 horsepower (hp).

To find the average power output of the dragster, we can use the formula:

Average Power = Work / Time

First, let's find the work done by the dragster. The work done can be calculated using the equation:

Work = Force × Distance × Cos(θ)

In this case, the force is the average friction force of 1100 N, the distance is 390 m, and the angle θ between the force and displacement is 0 degrees (cos(0) = 1). Therefore:

Work = 1100 N × 390 m × 1 = 429,000 J

Next, we can substitute the values into the formula for average power:

Average Power = Work / Time = 429,000 J / 7.30 s ≈ 58,767.12 W

To convert the average power to horsepower, we can use the conversion factor:

1 horsepower = 745.7 W

Therefore:

Average Power in horsepower = 58,767.12 W / 745.7 ≈ 78.81 hp

Hence, the average power output of the dragster is approximately 58,767.12 watts (W) or 78.81 horsepower (hp).

To learn more about horsepower click:

brainly.com/question/13259300

#SPJ1

The centre of mass of the 2D shape: Enter the mass (kg) of the 2D plate: a) 5.98515 kg,  the Moment (kg.m): 4.531, the x-coordinate (m):  0.7564 m. b)The mass: 6.004, the Moment (kg m): 0.4874m, the x-coordinate (m):  0.531 m

The center of mass of the 2D shape bounded by the lines y=+1.3x between x = 0 to 1.9 is found as follows:

Find the mass (kg) of the 2D plateMass = density × area

Area of the plate = 1/2 × (1.9) × (1.3)(1.9) = 2.2145 m2

Mass = 2.7 × 2.2145 = 5.98515 kg

Enter the mass (kg) of the 2D plate: 5.985

Enter the Moment (kg.m) of the 2D plate about the y-axis:

Moment of the 2D plate about the y-axis is given by

M y = density × (1/2) × base × height

2.2145 is the area, 1.9 is the width, then base = 1.9 / 2 = 0.95m

1.3 × 0.95 is the height.

Moment = 2.7 × 2.2145 × 0.95 × 1.3 × 0.475 = 4.531

Enter the x-coordinate (m) of the centre of mass of the 2D plate:

Center of mass, X cm = Moment/Mass = 4.531/5.98515 = 0.7564 m

b. The mass (kg) of the 3D body is found as follows:

Mass = density × volume

Volume of the body = ∏ × [(1.9)2 / 2] × [(1.3)2 / 2]

Volume = 1.9371117 m3

Mass = 3.1 × 1.9371117 = 6.00385747 kg

Enter the mass (kg) of the 3D body: 6.004

Enter the Moment (kg.m) of the 3D body about the y-axis:

The moment of the 3D body about the y-axis is given by

M y = density × V × (centroid of the semicircle)

From the semicircle above, centroid is given by

4 × r/3∏ = 1.3/2 = 0.65; r = 0.4874m

Centroid of semicircle = 4 × 0.4874 / (3∏) = 0.5193m

M y = 3.1 × 1.9371117 × 0.5193 = 3.184

Enter the x-coordinate (m) of the centre of mass of the 3D body:

Center of mass, X cm = Moment/Mass = 3.184/6.00385747 = 0.5307m (rounded to 3 significant figures)

Therefore, the x-coordinate of the center of mass of the 3D body is 0.531 m (rounded to 3 significant figures).

To know more about center of mass, refer here:

https://brainly.com/question/27549055#

#SPJ11

The minimum diameter of the circular opening from which the laser beam emerges can be calculated using the given wavelength ([tex]\lambda[/tex]) and the earth-moon distance (384,000 km).

The minimum diameter of the circular opening can be determined by considering the phenomenon of diffraction. Diffraction occurs when a wave encounters an obstacle or a narrow aperture, causing it to spread out and create a pattern of interference. In this case, the laser beam with a wavelength of 531 nm is passing through a circular opening.

To calculate the minimum diameter, we can use the formula for the angular size of the central maximum in a single-slit diffraction pattern:

[tex]d = 1.22 * \lambda / \theta[/tex]

Where [tex]\theta[/tex] represents the angular size, [tex]\lambda[/tex] is the wavelength, and d is the diameter of the circular opening. We can rearrange the formula to solve for d:

[tex]d = 1.22 * \lambda / \theta[/tex]

Given the wavelength ([tex]\lambda[/tex]) of 531 nm and the earth-moon distance of 384,000 km, we can convert the distance into meters (384,000,000 m). The angular size ([tex]\theta[/tex]) can be calculated by dividing the diameter of the moon by the earth-moon distance:

[tex]\theta[/tex] = diameter of moon / earth-moon distance

Substituting the values into the formula, we can find the minimum diameter of the circular opening from which the laser beam emerges.

Learn more about diffraction here:

https://brainly.com/question/12290582

#SPJ11

The syringe pump should be set to deliver approximately 20 drops per hour.

To determine the number of drops per hour required, we need to convert the given volume of morphine (2.4 fluid ounces) to microliters, which is the same unit as the drop volume.

1 fluid ounce is approximately equal to 29.5735 milliliters (ml), and 1 milliliter is equal to 1000 microliters (µl). Therefore, 1 fluid ounce is equal to approximately 29,573.5 µl.

So, 2.4 fluid ounces is equal to:

2.4 fluid ounces * 29,573.5 µl/fluid ounce = 70,976.4 µl

Now, we divide the total volume (70,976.4 µl) by the drop volume (200 µl) to find the number of drops needed:

70,976.4 µl / 200 µl/drop ≈ 354.882 drops

Since the infusion is to be delivered over a 24-hour period, we divide the total number of drops by 24 to find the drops per hour:

354.882 drops / 24 hours ≈ 14.786 drops per hour

Rounding the number to the nearest whole number, we set the syringe pump to deliver approximately 15 drops per hour.

To administer 2.4 fluid ounces of morphine over a 24-hour period, the syringe pump should be set to deliver approximately 15 drops per hour.

To know more about pump visit:

https://brainly.com/question/30115619

#SPJ11

Density is a physical property and is measured in a wide variety of units. However, the most suitable measurement unit for density is the kg/m³. The formula to measure the density of an object is given byd = m/VWhere d represents density, m represents mass, and V represents volume.

The units of density will depend on the units of mass and volume. For example, if the mass is measured in kilograms and the volume is measured in cubic meters, the density will be measured in kilograms per cubic meter (kg/m³). The kg/m³ measurement is the most suitable for density because it gives the mass of an object per unit of volume in a standardized form.

In general, density is expressed in terms of mass per unit volume and the SI units of mass and volume are kilograms and cubic meters, respectively. Therefore, the appropriate measurement unit for density is kg/m³.

To know more about kilograms visit :

https://brainly.com/question/29761698

#SPJ11

Brick blocks be placed on top of a wood so that the system floats could possible but there are certain conditions that must be met for this to happen.

When placed on top of wood, the brick blocks and the wood together form a floating system. For the system to float, the total weight of the floating system must be less than or equal to the weight of the water displaced by the floating system, known as buoyancy. Therefore, the condition that is necessary for the system to float is that the buoyancy force must be greater than or equal to the weight of the system.

The buoyancy force depends on the density of the water, the volume of the floating system, and the gravitational acceleration. The weight of the system depends on the weight of the brick blocks and the wood. To ensure that the system floats, the weight of the brick blocks and the wood must be less than the weight of the water that they displace. So therefore it is possible when brick blocks be placed on top of a wood so that the system floats.

To know more about buoyancy visit:

https://brainly.com/question/30641396

#SPJ11

The speed of the speck of dust is approximately 5.89 × [tex]10^{5}[/tex] m/s.

To solve this problem, we can use the principle of conservation of momentum. The momentum of an object is given by the product of its mass and velocity.

Given:

Mass of the speck of dust (m1) = 0.85 g = 0.85 × [tex]10^{-3}[/tex] kg

Mass of the proton (m2) = mass of the proton = 1.67 × [tex]10^{-27}[/tex] kg

Velocity of the proton (v2) = 0.99 times the speed of light (c) = 0.99 × 3 × [tex]10^{8}[/tex] m/s

Since the momentum of the speck of dust (p1) is equal to the momentum of the proton (p2), we can write:

m1 * v1 = m2 * v2

Solving for the velocity of the speck of dust (v1):

v1 = (m2 * v2) / m1

Substituting the given values:

v1 = (1.67 × [tex]10^{-27}[/tex]  kg * 0.99 × 3 × [tex]10^{8}[/tex] m/s) / (0.85  × [tex]10^{-3}[/tex]  kg)

Calculating the value:

v1 = 5.89  × [tex]10^{5}[/tex] m/s

Therefore, the speed of the speck of dust is approximately 5.89  × [tex]10^{5}[/tex] m/s.

To know more about speed here

https://brainly.com/question/29119423

#SPJ4

Captain C-Bo takes his passengers on a deep-sea fishing trip where he expects them to catch red snappers at a rate of two fish per hour. Deep-sea fishing is done in areas of the ocean that are over 30 meters deep, where there are several types of fish, including red snapper.

The red snapper is a common catch in deep-sea fishing trips as it's a popular and delicious fish. It's found in deep waters from 30 feet to 200 feet in depth, typically near the bottom, and can weigh up to 40 pounds. Red snapper is a popular catch in deep-sea fishing, and because of its popularity, the fishing industry has developed specific rules and regulations to protect it and ensure it's sustainably fished.

In deep-sea fishing, the passengers use a fishing rod and bait to catch fish. The captain knows that each passenger will catch red snapper at a rate of two fish per hour. Thus, if there are 10 passengers on the boat, they would catch 20 fish per hour. If the trip lasts for four hours, each passenger will have caught eight fish. If the trip lasts for eight hours, each passenger will have caught 16 fish.

Thus, it's essential to understand the duration of the fishing trip to determine the catch. In conclusion, on a deep-sea fishing trip, passengers can expect to catch red snapper. If there are 10 passengers, they will catch 20 fish per hour, with each passenger catching two fish. The duration of the trip will determine the overall catch.

Learn more about fishing industry here ;

https://brainly.com/question/31561888

#SPJ11

The gravitational force between the objects, when the distance between them doubles, will be 400 N. The correct answer is Option A.

The gravitational force between two objects is inversely proportional to the square of the distance between them. If the distance between the objects doubles, the gravitational force will decrease by a factor of four.

Given that the initial gravitational force is 1600 N, if the distance between the objects doubles, the new gravitational force will be:

(1/2)^2 * 1600 N = 1/4 * 1600 N = 400 N

Therefore, when the distance between the objects  is doubled, the gravitational force between them will be 400 N, which corresponds to Option A.

You can learn more about gravitational force at

https://brainly.com/question/27943482

#SPJ11

After considering the given data we conclude that the acceleration of [tex]M_{1}[/tex]is [tex]a = (M2 - M1)/(M1 + M2) * g[/tex], and for the special case When M₁ << M₂, the acceleration is [tex]a \approx M2/(M1 + M2) * g[/tex], When M₂ << M₁, the acceleration  is a ≈ g.

To evaluate the acceleration of M1 in the system of strings and pulleys, we can apply the following steps:
Draw free-body diagrams for M₁ and M₂, showing the forces acting on each mass.
Describe the equations of motion for each mass, applying Newton's second law [tex](F = ma)[/tex]and the fact that the tension in the string is the same on both sides of the pulley.
Evaluate the equations simultaneously to find the acceleration of M₁.
a) The acceleration of M₁ can be calculated using the following equation:
[tex]a = (M_2 - M_1)/(M_1 + M_2) * g[/tex]
Here,
M₁ and M₂ = masses of the blocks,
g = acceleration due to gravity.
b) When M₁ << M₂, the acceleration of M₁ can be approximated as:
[tex]a \approx M_2/(M_1 + M_2) * g[/tex]
This is because the mass of M₁ is negligible compared to M₂, so the acceleration of the system is determined mainly by the mass of M₂.
c) When M₂ << M₁, the acceleration of M₁ can be approximated as:
a ≈ g
This is because the mass of M₂ is negligible compared to M₁, so the acceleration of the system is determined mainly by the mass of M₁.
To learn more about acceleration
https://brainly.com/question/30595126
#SPJ4
The complete question is
Masses M_{1} and M_{2} are connected to a system of strings and pulleys as shown below. The strings are massless and inextensible, and the pulleys are massless and frictionless. 1) Find the acceleration of M_{1} .2) What is the acceleration of M_{1} in the special cases when M_{1} << M_{2} and when M_{2} << M_{1}

Grain boundaries are two-dimensional defects that can have a significant impact on the properties of polycrystalline materials. The correct answer is option(d).

Two-dimensional (2D) defects are those that occupy only two dimensions, like the surface of the material or a plane of atoms. In that sense, low angle grain boundaries are two-dimensional (2D) defects in the material.

The low angle grain boundaries are two-dimensional (2D) defects in the material. Grain boundaries are interfaces between grains, or crystals, in polycrystalline materials. The interface between two grains is a layer of atoms or a plane of atoms that is in a low-energy, non-crystalline condition.

To know more about grain boundaries refer to:

https://brainly.com/question/15106639

#SPJ11

The distance between the central axis and the first dark fringe in the given single-slit diffraction experiment is approximately 4221.75 mm.

The distance between the central axis and the first dark fringe in a single-slit diffraction experiment can be determined using the formula:

y = (λL) / w

where:

y is the distance between the central axis and the first dark fringe,

λ is the wavelength of light,

L is the distance between the slit and the screen,

and w is the width of the slit.

λ = 573 nm

λ= 573 × 10⁻³m

w = 0.312 mm

w = 0.312 × 10⁻³ m

L = 2.30 m

Now, let's calculate the distance between the central axis and the first dark fringe (y):

y = (λL) / w

y = (573 × 10⁻⁹ m) × (2.30 m) / (0.312 × 10⁻³ m)

y  = 4.22175 m

We need to convert this result to millimeters (mm) since the question asks for the answer in that unit:

y = 4.22175 m × 1000 mm/m

y  ≈ 4221.75 mm

Therefore, the distance between the central axis and the first dark fringe is approximately 4221.75 mm.

In conclusion, the distance between the central axis and the first dark fringe in the given single-slit diffraction experiment is approximately 4221.75 mm.

To know more about diffraction  visit:

https://brainly.com/question/28269867

#SPJ11

(a) The gravitational potential energy of the system can be calculated by summing up the potential energies between each pair of particles.

(b) When released simultaneously, the particles will undergo uniform circular motion around the center of mass of the system, and no collisions will occur.

(a)

The gravitational potential energy of the system can be calculated using the formula:

Potential energy = - G * (m1 * m2) / r

Where:

G is the gravitational constant (approximately 6.674 × 10^-11 N*m^2/kg^2)

m1 and m2 are the masses of the particles

r is the distance between the particles

In this case, we have three particles, so we need to calculate the potential energy between each pair and sum them up.

Let's denote the particles as A, B, and C. The distance between any two particles is equal to the length of one side of the equilateral triangle, which is 32.0 cm.

Potential energy between particles A and B:

U_AB = - G * (m1 * m2) / r

          = - (6.674 × 10⁻¹¹N*m²kg²) * (5.60 g)² / (32.0 cm)

Similarly, potential energy between particles B and C:

U_BC = - G * (m1 * m2) / r

         = - 6.674 × 10⁻¹¹N*m²kg²) * (5.60 g)² / (32.0 cm)

And potential energy between particles C and A:

U_CA = - G * (m1 * m2) / r

          = -6.674 × 10⁻¹¹N*m²kg²) * (5.60 g)² / (32.0 cm)

To find the total potential energy of the system, we sum up the individual potential energies:

Potential energy of the system = U_AB + U_BC + U_CA

(b)

When the particles are released simultaneously, they will start moving under the influence of gravity.

Each particle will experience an attractive force towards the other two particles. The subsequent motion of each particle will be circular motion around the center of mass of the system.

Since the particles are equidistant and the forces acting on them are equal in magnitude, the resultant motion will be uniform circular motion. Each particle will move along a circle with the center at the center of mass of the system.

No collisions will take place because the particles are moving in circular paths around the center of mass and their paths do not intersect.

(a) The gravitational potential energy of the system can be calculated by summing up the potential energies between each pair of particles.

(b) When released simultaneously, the particles will undergo uniform circular motion around the center of mass of the system, and no collisions will occur.

To know more about collisions visit:

https://brainly.com/question/7221794

#SPJ11

Edwin Hubble studied the Andromeda galaxy and found that it was an individual galaxy and not part of our own milky way is Hubble discovered this by observing a variable star, known as a Cepheid variable, in the Andromeda galaxy and measured its distance from Earth.

The Cepheid variable was used to measure the galaxy's distance because the star's brightness varied predictably, and the brightness was directly related to its distance from Earth. By studying the Andromeda galaxy, Hubble discovered that it was much farther away from Earth than originally thought, and it was actually a separate galaxy rather than a part of the Milky Way.

This discovery proved the existence of other galaxies outside of our own Milky Way, which was a groundbreaking finding at the time and paved the way for modern astronomy. Overall, Hubble's study of the Andromeda galaxy provided significant evidence to support the theory that the universe was much larger than previously thought and made a huge contribution to our understanding of the universe.

To know more about Milky Way visit:

https://brainly.com/question/30714548

#SPJ11

BaF₂ will precipitate when the concentration of F⁻ exceeds 3.46 × 10⁻³ M. This is determined by the solubility product constant (Ksp) of BaF₂, which is 1.7 × 10⁻⁶. If the concentration of F⁻ exceeds this threshold, the excess ions will form a solid precipitate.

The solubility product constant (Ksp) for BaF₂ is given as 1.7 × 10⁻⁶. When a sparingly soluble salt like BaF₂ is in equilibrium with its ions in a solution, the product of the concentrations of the ions raised to their stoichiometric coefficients is equal to the solubility product constant.

The balanced equation for the dissociation of BaF₂ is:

BaF₂ ⇌ Ba²⁺ + 2F⁻

At equilibrium, let x be the concentration of F⁻ ions in M. The concentration of Ba²⁺ ions will be 0.0144 M (given).

Using the stoichiometric coefficients, the equilibrium expression for the solubility product constant can be written as:

Ksp = [Ba²⁺][F⁻]²

Substituting the known values:

1.7 × 10⁻⁶ = (0.0144)(x)²

Solving for x:

x = √(1.7 × 10⁻⁶ / 0.0144) ≈ 3.46 × 10⁻³ M

Therefore, when the concentration of F⁻ exceeds 3.46 × 10⁻³ M, BaF₂ will precipitate.

To know more about solubility, refer here:

https://brainly.com/question/28170449#

#SPJ4

A concave mirror has a focal length of 20 cm. So, B) [tex]= \frac{1}{4}[/tex] is closest to the mark. The proper magnification, however, is [tex]= \frac{1}{5}[/tex] , which is not offered in the available options.

To find the magnification of a concave mirror, we can use the formula:

magnification (m) = - (image distance / object distance)

Given:

Focal length (f) = -20 cm (negative because the mirror is concave)

Object distance (u) = 100 cm

Using the mirror formula:

[tex]\frac{1}{f} = \frac{1}{v} - \frac{1}{u}[/tex]

Substituting the values:

[tex]\frac{1}{-20} = \frac{1}{v} - \frac{1}{100}[/tex]

Simplifying:

[tex]\[-\frac{1}{20} = \frac{1}{v} - \frac{1}{100}\][/tex]

To solve for v, we can find the common denominator and simplify the equation:

[tex]\[-\frac{5}{100} = \frac{1}{v}\][/tex]

Simplifying further:

[tex]\[-\frac{1}{20} = \frac{1}{v}\][/tex]

Cross-multiplying:

v = -20 cm

The negative sign indicates that the image is virtual and located on the same side as the object.

Now, we can calculate the magnification (m):

[tex]\[m = -\frac{v}{u} \\[/tex]

[tex]-\frac{-20}{100}[/tex]

[tex]= \frac{20}{100}[/tex]

[tex]= \frac{1}{5}[/tex]

Therefore, the magnification is [tex]= \frac{1}{5}[/tex].

Among the given options, the closest one is b) [tex]= \frac{1}{4}[/tex]. However, the correct magnification is[tex]= \frac{1}{5}[/tex], which is not provided in the given choices.

To know more about the magnification refer here :

https://brainly.com/question/12966853#

#SPJ11

The focal length of the lens is 18 cm. This is determined by the lens formula and the fact that the lens forms a real image that is twice as high as the object.

In this problem, we have an object located at a distance of 27.0 cm from a certain lens. The lens forms a real image that is twice as high as the object. Let's denote the height of the object as Hₒ and the height of the image as Hᵢ.

According to the lens formula,

1/f = 1/v - 1/u,

where f is the focal length of the lens, v is the image distance, and u is the object distance.

Since the image formed is real, the image distance v is positive. Given that the image height Hᵢ is twice the object height Hₒ, we can write Hᵢ = 2Hₒ.

Using the magnification formula,

magnification (m) = Hᵢ/Hₒ = -v/u,

we can substitute Hᵢ = 2Hₒ and rearrange to get v/u = -1/2.

Substituting these values into the lens formula and solving for f, we find f = 18 cm.

Therefore, the correct answer is e) 18 cm.

To know more about magnification, refer here:

https://brainly.com/question/28350378#

#SPJ4

The scale reads 410.3 N when the elevator is accelerating downward at 3.5 m/s².

Answer: Scale reading for the given conditions are:

Scale reading (in N) when the elevator is ascending at a constant speed of 3.5 m/s is 696.8 N.

Scale reading (in kg) when the elevator is ascending at a constant speed of 3.5 m/s is 71.0 kg.

Scale reading (in N) when the elevator is falling at 3.5 m/s is 696.8 N. Scale reading (in kg) when the elevator is falling at 3.5 m/s is 71.0 kg.

Scale reading (in N) when the elevator is accelerating upward at 3.5 m/s² is 710.3 N.

Scale reading (in kg) when the elevator is accelerating upward at 3.5 m/s² is 71.0 kg.

Scale reading (in N) when the elevator is accelerating downward at 3.5 m/s² is 410.3 N.

Scale reading (in kg) when the elevator is accelerating downward at 3.5 m/s² is 71.0 kg.

The given problem is based on the concept of acceleration due to gravity. Let's solve the given problem step by step: Solve for constant speed. Here, the elevator is ascending at a constant speed of 3.5 m/s. Since the elevator is moving at a constant speed, the net force acting on the person is zero because the acceleration is zero. Thus, the scale will read the same as the weight of the person.

So,

the scale reads;= Weight of the person= (mass of the person) × g= 71.0 kg × 9.8 m/s²= 696.8 N,

The scale reads 696.8 N when the elevator is ascending at a constant speed of 3.5 m/s. Now, solve for the same condition when the scale reads in kg.

The scale reads in kg = mass of the person= 71.0 kg,

The scale reads 71.0 kg when the elevator is ascending at a constant speed of 3.5 m/s.

Solve for when the elevator is falling at a constant speed of 3.5 m/s. Since the elevator is falling at a constant speed, the net force acting on the person is zero because the acceleration is zero.

Thus, the scale will read the same as the weight of the person.

So, the scale reads;= Weight of the person= (mass of the person) × g= 71.0 kg × 9.8 m/s²= 696.8 N.

The scale reads 696.8 N when the elevator is falling at a constant speed of 3.5 m/s.

Now, solve for the same condition when the scale reads in kg.

The scale reads in kg = mass of the person= 71.0 kg.

The scale reads 71.0 kg when the elevator is falling at a constant speed of 3.5 m/s.

Solve for acceleration upward, Now, when the elevator is accelerating upward at 3.5 m/s², the net force acting on the person is the sum of the force exerted by the person and the force exerted by the elevator. Thus, the scale will read more than the weight of the person.

So,

the scale reads;= Force on the person= (mass of the person) × (g + a)= 71.0 kg × (9.8 m/s² + 3.5 m/s²)= 710.3 N.

The scale reads 710.3 N when the elevator is accelerating upward at 3.5 m/s².Now, solve for the same condition when the scale reads in kg.

The scale reads in kg = mass of the person= 71.0 kg.

The scale reads 71.0 kg when the elevator is accelerating upward at 3.5 m/s².

Solve for acceleration downward. Now, when the elevator is accelerating downward at 3.5 m/s², the net force acting on the person is the difference between the force exerted by the person and the force exerted by the elevator. Thus, the scale will read less than the weight of the person.

So, the scale reads;=

Force on the person= (mass of the person) × (g - a)= 71.0 kg × (9.8 m/s² - 3.5 m/s²)= 410.3 N.

Now, solve for the same condition when the scale reads in kg.

The scale reads in kg = mass of the person= 71.0 kg,

The scale reads 71.0 kg when the elevator is accelerating downward at 3.5 m/s².

to know more about scale reading visit:

https://brainly.com/question/14623697

#SPJ11

The speed of a wave in a uniform medium is directly proportional to the wavelength of the wave when the tension remains the same. If the wavelength of a wave in a uniform medium increases while the tension stays the same, its speed will decrease.

This is due to the fact that as the wavelength of a wave increases, the distance between successive crests or troughs of the wave also increases. Therefore, it will take more time for the wave to travel from one point to another, resulting in a decrease in the speed of the wave.

This can be explained using the wave equation v = fλ, where v is the speed of the wave, f is the frequency of the wave, and λ is the wavelength of the wave. Since the frequency of the wave remains constant in this case, an increase in wavelength results in a decrease in the speed of the wave.

This phenomenon can be observed in various types of waves, including sound waves, water waves, and electromagnetic waves, which all obey the same wave equation.

In summary, if the wavelength of a wave in a uniform medium increases while the tension stays the same, its speed will decrease.

Learn more about sound waves here ;

https://brainly.com/question/1554319

#SPJ11

The rotational kinetic energy of the motorcycle wheel is approximately 4994.16 Joules.

The rotational kinetic energy (KE) of an object can be calculated using the formula:

KE = (1/2) * I * ω^2

Where:

KE is the rotational kinetic energy

I is the moment of inertia

ω is the angular velocity

The moment of inertia (I) for a solid disk can be calculated using the formula:

I = (1/2) * m * (r_outer^2 + r_inner^2)

Where:

m is the mass of the object (motorcycle wheel)

r_outer is the outer radius of the wheel

r_inner is the inner radius of the wheel

Given data:

Mass of the motorcycle wheel (m) = 14 kg

Angular velocity (ω) = 120 rad/s

Inner radius (r_inner) = 0.280 m

Outer radius (r_outer) = 0.330 m

Using the above formulas, we can calculate the rotational kinetic energy as follows:

I = (1/2) * 14 kg * (0.330 m^2 + 0.280 m^2)

I ≈ 0.648 kg * m^2

KE = (1/2) * 0.648 kg * m^2 * (120 rad/s)^2

KE ≈ 4994.16 J

The rotational kinetic energy of the motorcycle wheel is approximately 4994.16 Joules.

To know more about rotational kinetic energy visit:

brainly.com/question/30459585

#SPJ11

The given statement "In order to get an object moving, you must push harder on it than it pushes back on you" is False.

According to Newton's third law of motion, for every action, there is an equal and opposite reaction. When you push an object, the object pushes back on you with an equal force in the opposite direction.

This means that the force you exert on the object and the force the object exerts on you are always equal in magnitude but opposite in direction.

The interaction between you and the object involves a pair of forces that are of the same strength.

Therefore, in order to get an object moving, you don't necessarily need to push harder on it than it pushes back on you.

Instead, you need to exert a force greater than the frictional forces or any other opposing forces acting on the object.

To know more about Newton's third law, refer here:

https://brainly.com/question/23772134#

#SPJ11

The given statement "the load is the pivot point of a lever" is False.

A lever is a simple machine that can be used to lift or move heavy loads with minimal effort. The basic structure of a lever consists of a rigid bar that can rotate about a fixed point, which is known as the fulcrum. A load is applied to one end of the bar, while the effort is applied to the other end. The effort applied to the bar causes the lever to rotate about the fulcrum, allowing the load to be lifted or moved more easily. The load in a lever is the weight or object that is being lifted or moved. The effort is the force applied to the lever to lift or move the load. The fulcrum is the pivot point around which the lever rotates.In a lever, the fulcrum is the pivot point, and the load and effort are applied at different points on the bar. So, the statement that "the load is the pivot point of a lever" is false.Therefore, option B. False is the correct answer.

To know more about pivot point visit:

https://brainly.com/question/29606651

#SPJ11

Various radial points on a rotating ferris wheel have " different linear velocities and equal angular velocities". The correct answer is option A, i and iv only.

When considering a rotating Ferris wheel, different radial points on the wheel will have different linear velocities (i) due to their varying distances from the center of rotation. Points closer to the center will have lower linear velocities compared to points farther from the center.

However, the angular velocity (rate of rotation) remains the same for all radial points on a rotating Ferris wheel. Hence, they will have equal angular velocities (iv). The time taken for a complete revolution is the same regardless of the radial distance from the center.

Therefore, the correct answer is option A, as both i and iv are true statements for various radial points on a rotating Ferris wheel.

You can learn more about ferris wheel  at

https://brainly.com/question/30985635

#SPJ11

The position of the ball attached to the unforced spring with a damping force of 6 times velocity is given by the function [tex]x(t) = e^{-3}t (sin3t)[/tex]. The system is overdamped, and the maximum displacement from equilibrium is 0.1573 meters.

a) Solve for the position of the ball.

The equation of motion of the ball attached to the unforced spring with damping force of 6 times velocity can be written as, [tex]m(d^{2}x/dt^{2}) + 6(dx/dt) + kx = 0[/tex]

The given values are,

As we are supposed to find the position of the ball, we will solve the differential equation by assuming the position x as the solution and by integrating the given equation two times.

[tex]m\left(\frac{{d^2x}}{{dt^2}}\right) + 6\left(\frac{{dx}}{{dt}}\right) + kx = 0[/tex]

This is the standard form of a second order homogeneous linear differential equation. The characteristic equation of this differential equation is, [tex]m^{2} r^{2} + 6mr + k = 0[/tex]

Solving the above quadratic equation, we get, [tex]r = -3 \pm \sqrt{9 - \frac{4k}{m^2}} / 2m[/tex]

Here, [tex]k/m = 9/1 = 9[/tex]. So, [tex]r = -3 \pm \sqrt{9 - 36} / 2 = -3 \pm 3i[/tex]

From the above values of r, we can say that the general solution of the differential equation is, [tex]x(t) = e^{-3t}(C_1\cos(3t) + C_2\sin(3t))[/tex]

Let's find the values of constants C1 and C2 using the initial values of the ball position and velocity.

At

So,

Substituting these values in the general solution of [tex]x(t),x(t) = e^{-3}t (sin3t)[/tex]

Therefore, the position of the ball as a function of time is given by, [tex]x(t) = e^{-3}t (sin3t)[/tex].

b) The damping force in the given equation is, b = 6 times the velocity.Since the damping force is greater than the critical damping force [tex](2\sqrt{m \cdot k})[/tex], the given spring is overdamped.

c) Show that the maximum displacement of the ball from equilibrium is a az meters. To find the maximum displacement of the ball from equilibrium, we can differentiate the position function with respect to time and equate it to zero.

d). [tex](x(t)) / dt = e^{-3}t (3cos3t - sin3t)[/tex]

When the above derivative of the position function is zero, the position of the ball is at the maximum or minimum from the equilibrium.

Substituting the values of t in the above equation, we get,cos3t = sin3t

Therefore, [tex]\tan(3t) = 1 \quad t = \frac{\pi}{12}, \frac{5\pi}{12}, \frac{9\pi}{12}, \frac{13\pi}{12}, \frac{17\pi}{12}, \ldots \quad \text{For } t = \frac{\pi}{12}[/tex], the position of the ball is at maximum from equilibrium.

Substituting this value in the position function,[tex]x(t) = e^{-3t} \sin(3t) \quad x\left(\frac{\pi}{12}\right) = e^{-3\left(\frac{\pi}{12}\right)} \sin\left(\frac{\pi}{4}\right) = 0.1573 \, \text{m}[/tex]

Therefore, the maximum displacement of the ball from equilibrium is [tex]0.1573[/tex] meters.

Learn more about overdamped: brainly.com/question/31519346

#SPJ11

The intensity of the laser beam used to burn away cancerous tissue is 2.00 × 10⁹ W/m².

Given data:

The time interval, t = 4.00 s

The diameter of circular spot, d = 3.60 mm

Radius of the circular spot, r = d/2 = 1.80 mm = 1.80 × 10⁻³ m

Energy of the laser beam, E = 363 J

Absorption coefficient, α = 0.90

Intensity of the laser beam is given as, P = E/At,

where A is the area of the circular spot, A = πr²

Therefore, P = E/πr²t

Substituting the given values, we have;

Intensity, P = (363 J) / [π (1.80 × 10⁻³ m)² × 4.00 s]

Intensity of laser beam is given as, P = 2.00 × 10⁹ W/m².

The power transferred per unit area is known as the intensity or flux of radiant energy, where the area is measured on a plane perpendicular to the direction of the energy's propagation. Watts per square metre (W/m2) and kilograms per square meter (kg/s3) are the units used in the SI system.

With waves like acoustic waves (sound) or electromagnetic waves like light or radio waves, intensity is most usually employed to describe the average power transfer across one period of the wave.

Know more about intensity here:

https://brainly.com/question/14085431

#SPJ11

Given the speed of sound, which is approximately 343 m/s, we can substitute the values and calculate the new 3rd harmonic frequency.

To determine the new 3rd harmonic frequency, we can use the relationship between the frequency and the length of the vibrating air column. In an open-ended tube, the 3rd harmonic frequency is given by f = (3v) / (2L), where f is the frequency, v is the speed of sound, and L is the length of the vibrating air column. Since the frequency is directly proportional to the length, we can calculate the new frequency by adjusting the length accordingly:
L_new = L_original + 0.110 m

f_new = (3v) / (2L_new)

Given the speed of sound, which is approximately 343 m/s, we can substitute the values and calculate the new 3rd harmonic frequency.

To learn more about harmonic frequency:

https://brainly.com/question/13015026

#SPJ11

Statement B, which claims that the concentration of the reactants is equal to the concentration of the products, does not accurately describe the equilibrium state

The equilibrium state in a chemical reaction is characterized by several key features. Let's examine each statement to identify which one does not accurately describe equilibrium:

A. Equilibrium is dynamic and there is no net conversion in reactants and products.

This statement is true. In an equilibrium state, both the forward and reverse reactions continue to occur, but the concentrations of reactants and products remain constant over time, resulting in no net conversion.

B. The concentration of the reactants is equal to the concentration of the products.

This statement is not true for all equilibrium states. In some cases, the concentrations of reactants and products may be equal, but in other cases, they can have different concentrations depending on the stoichiometry of the balanced chemical equation. Therefore, this statement does not universally describe equilibrium.

C. The concentrations of the reactants and products reach a constant level.

This statement is true. At equilibrium, the concentrations of the reactants and products stabilize and remain constant as long as external conditions are not altered.

D. The rate of the forward reaction is equal to the rate of the reverse reaction.

This statement is true. In an equilibrium state, the rates of the forward and reverse reactions are equal, ensuring a balance between the formation and consumption of reactants and products.

Statement B, which claims that the concentration of the reactants is equal to the concentration of the products, does not accurately describe the equilibrium state.

To know more about reactants visit:

https://brainly.com/question/6421464

#SPJ11

The length of the uniform steel bar is approximately 0.546 meters (or 54.6 centimeters).

The period of a simple pendulum, which the swinging motion of the steel bar resembles, is given by the formula T = 2π√(L/g), where T is the period, L is the length of the pendulum, and g is the acceleration due to gravity (approximately 9.8 m/s^2).

Given that the period T is 1.1 seconds, we can rearrange the formula to solve for the length L: L = (T^2 * g) / (4π^2).

Substituting the values into the formula: L = (1.1^2 * 9.8) / (4π^2) ≈ 0.546 meters.

Therefore, the length of the uniform steel bar is approximately 0.546 meters (or 54.6 centimeters).

The length of the uniform steel bar can be determined using the formula for the period of a simple pendulum. By substituting the given period of 1.1 seconds into the formula, we find that the length is approximately 0.546 meters (or 54.6 centimeters). This calculation assumes the bar swings as a simple pendulum, neglecting any additional factors such as air resistance or other external influences.

To know more about steel bar visit:

https://brainly.com/question/15370409

#SPJ11

A current-carrying wire in a magnetic field is subjected to a magnetic force. The direction of this force is perpendicular to both the direction of the current and the direction of the magnetic field. The force on the wire is 0.000728 N. This force is in a direction perpendicular to both the wire and the magnetic field.

In this problem, the wire is at an angle of 40 degrees to the magnetic field, but the force is still perpendicular to both the wire and the field. The force on the wire can be calculated using the following formula: F = BILsinθwhere F is the force on the wire, B is the magnetic field, I is the current, L is the length of the wire, and θ is the angle between the wire and the magnetic field. In this case: F = (0.002 T)(3.50 A)(0.35 m)sin(40°) = 0.000728 N

to  know more about magnetic field visit:

https://brainly.com/question/19542022

#SPJ11

Given that the electric force exerted by the negatively charged metal sphere on the test charge is [tex]6.00 × 10^−5[/tex] newtons and the test charge is [tex]3.00 × 10^−9[/tex] coulombs, we have to find the magnitude and direction of the electric field strength at this location.

To calculate the magnitude of the electric field strength, we use the formula of Coulomb’s Law as shown below;[tex]Fe = k(q1q2)/r²[/tex]where, Fe = force exerted, q1 and q2 = charges, r = distance between charges, k = Coulomb's constantPutting the values in the above formula, we get;

[tex]6.00 × 10^−5 = (9.00 × 10^9) (3.00 × 10^−9)q2 / r²[/tex]

Thus, the electric field strength, E at this location is given by;

[tex]E = Fe / q2= (6.00 × 10^−5) / (3.00 × 10^−9)E = 2.00 × 10^4 N/C[/tex]

Thus, the magnitude of the electric field strength at this location is [tex]2.00 × 10^4 N/C[/tex].

As the test charge is negative, it experiences an electrostatic force directed towards the sphere, hence, the direction of the electric field strength is directed towards the sphere.Option (2) [tex]2. 00 × 10^4 N/C[/tex] directed toward the sphere is correct.

To know more about electrostatic visit :

https://brainly.com/question/16489391

#SPJ11