A 0.200 M solution of a week acid, HA, is 9.4% ionized. The molar concentration of H+ is 0.0188 M. the Acid-dissociation constant, Ka, for HA is...?​

Answer:

Evaporation

Explanation:

Water in the ocean, rivers, lakes, etc. is part of the hydrosphere, and when that water evaporates it enters the atmosphere

Answer:

true

Explanation:

Endo means inside

but exo means outside

an Endo thermic reaction sounds like it wouldn't be the one to give off heat, so it might be storing heat.

Answer: There are [tex]16.14 \times 10^{23}[/tex] atoms of hydrogen are present in 40g of urea, [tex](NH_{2})_{2}CO[/tex].

Explanation:

Given: Mass of urea = 40 g

Number of moles is the mass of substance divided by its molar mass.

First, moles of urea (molar mass = 60 g/mol) are calculated as follows.

[tex]Moles = \frac{mass}{molar mass}\\= \frac{40 g}{60 g/mol}\\= 0.67 mol[/tex]

According to the mole concept, 1 mole of every substance contains [tex]6.022 \times 10^{23}[/tex] atoms.

So, the number of atoms present in 0.67 moles are as follows.

[tex]0.67 mol \times 6.022 \times 10^{23} atoms/mol\\= 4.035 \times 10^{23} atoms[/tex]

In a molecule of urea there are 4 hydrogen atoms. Hence, number of hydrogen atoms present in 40 g of urea is as follows.

[tex]4 \times 4.035 \times 10^{23} atoms\\= 16.14 \times 10^{23} atoms[/tex]

Thus, we can conclude that there are [tex]16.14 \times 10^{23}[/tex] atoms of hydrogen are present in 40g of urea, [tex](NH_{2})_{2}CO[/tex].

Answer:

XeF4                  True

[PdCl4]2−           True

naphthalene      True

Furan                  False

C4H4O               False  

Explanation:

From the given information:

Only XeF4;  [PdCl4]2−;  naphthalene are true. This is because their molecules contain -nC₂ axis which is perpendicular to the Cn axis. The image attached below shows the structural formula of each compound, there below, we can see that Furan only possesses one C₂ axis but not -nC₂ ⊥ C₂.

I believe the answer for this is:

C. Visible Light Rays

I hope this helps! :D

Answer:

C, visible light rays :)

Explanation:

Hope i could help

Answer:

El cloruro de litio se utiliza para fabricar litio metálico. El cloruro de litio se funde y electroliza. Esto produce litio metálico líquido.

Explanation:

sowwy si mi español es malo

Answer:

give him brainliest

Explanation:

Answer:

See Explanation

Explanation:

Given that;

N/No = (1/2)^t/t1/2

Where;

No = amount of radioactive isotope originally present

N = A mount of radioactive isotope present at time t

t = time taken

t1/2 = half life

N/1000=(1/2)^3/6

N/1000=(1/2)^0.5

N = (1/2)^0.5 * 1000

N= 707 unstable nuclei

Since the value of the initial activity of the radioactive material was not given, the activity of the radioactive material after three months is given by;

Decay constant = 0.693/t1/2 = 0.693/6 months = 0.1155 month^-1

Hence;

A=Aoe^-kt

Where;

A = Activity after a time t

Ao = initial activity

k = decay constant

t = time taken

A = Aoe^-3 *0.1155

A=Aoe^-0.3465

Answer:

for number of neutrons it is mass number take away the atomic number

number of electron is the same as number of proton unless there is a charge like +2 it will have 2 less electron than the proton (atomic number ) number.

number of proton is the atomic number

Explanation:

hope it make sense:)

Answer:

D. The number or protons

Explanation:

It doesn't matter how many electrons or neutrons an atom has; the element always is defined by its number of protons.

Answer:

Explanation:

To find the number of moles in a substance given it's number of entities we use the formula

[tex]n = \frac{N}{L} \\[/tex]

where n is the number of moles

N is the number of entities

L is the Avogadro's constant which is

6.02 × 10²³ entities

From the question we have

[tex]n = \frac{3.01 \times {10}^{23} }{6.02 \times {10}^{23} } = \frac{3.01}{6.02} \\ = 0.5[/tex]

We have the final answer as

Hope this helps you

The main function of nucleic acid is It stores lipids inside the proteins.

Nucleic acids are large biomolecules that play essential roles in all cells and viruses. A major function of nucleic acids involves the storage and expression of genomic information. Deoxyribonucleic acid, or DNA, encodes the information cells need to make proteins. A related type of nucleic acid, called ribonucleic acid (RNA), comes in different molecular forms that play multiple cellular roles, including protein synthesis. 

Nucleic acids are made of nitrogen-containing bases, phosphate groups, and sugar molecules. Each type of nucleic acid has a distinctive structure and plays a different role in our cells. Researchers who first explored molecules inside the nucleus of cells found a peculiar compound that was not a protein or a lipid or a carbohydrate. It was new.  The discovery of this molecule — nuclein, which upon further understanding became nucleic acid — set in motion the eventual discovery of DNA.

Learn more about Nucleic acids

https://brainly.com/question/2488520

#SPJ2

Answer:

The heat capacity of the metal underneath the gold is 0.431 J/g°C

Explanation:

Using the formula as outlined in the image:

Q = m × c × ∆T

Where;

Q = amount of heat energy (J)

m = mass of substance (g)

c = specific heat capacity (J/g°C)

∆T = change in temperature (°C)

According to the information in this question;

Q = 503.9J

m = 23.02g

c = ?

∆T = 74°C - 23.2°C = 50.8°C

Using Q = m × c × ∆T

c = Q ÷ m∆T

c = 503.9 ÷ (23.02 × 50.8)

c = 503.9 ÷ 1169.42

c = 0.431 J/g°C

From the above heat capacity of the metal underneath the gold, it is obvious that the metal is not pure gold (c = 0.129J/g°C)

Answer:

[tex](24 \times 2) \: g \: of \: magnesium \: reacts \: with \: (16 \times 2) \: g \: of \: oxygen \\ 2.64 \: g \: of \: magnesium \: will \: react \: with \: ( \frac{2.64 \times 16 \times 2}{24 \times 2} ) \: g \\ = 1.76 \: g \: of \: oxygen[/tex]

Answer:

The correct answer is -

1. Malaysia - Kuala Lumpur 3.1390° N, 101.6869° E

2. Indonesia - Jakarta - 6.2088° S, 106.8456° E

3. Vietnam - Hanoi - 21.0278° N, 105.8342° E

4. Taiwan - Taipei  -25.0330° N, 121.5654° E

5. China - Beijing - 39.9042° N, 116.4074° E

6. Palau - Ngerulmud  - 7.5004° N, 134.6243° E

7. Japan - Tokyo - 35.6762° N, 139.6503° E

Explanation:

The Philippines does not share its land borders with any country, however, the Philippines claims that they share their boundary with Malaysia. Other than land borders they also share maritime borders with Palau, Taiwan, Vietnam,  China, Indonesia, and Japan.

All these neighboring countries have capitals that are as follows with their coordinates on the atlas-

1. Malaysia - Kuala Lumpur 3.1390° N, 101.6869° E

2. Indonesia - Jakarta - 6.2088° S, 106.8456° E

3. Vietnam - Hanoi - 21.0278° N, 105.8342° E

4. Taiwan - Taipei  -25.0330° N, 121.5654° E

5. China - Beijing - 39.9042° N, 116.4074° E

6. Palau - Ngerulmud  - 7.5004° N, 134.6243° E

7. Japan - Tokyo - 35.6762° N, 139.6503° E

Answer:

True.

Explanation:

Yes, analyses of enzymes found in the blood are used as indicators of tissue damage in the heart, liver, muscle etc has occurred. This leakage of enzymes into the bloodstream tells us whether the tissue is damaged or not. Lactate dehydrogenase is a type of enzyme which is used as indicator which is responsible for the interconverts lactate and pyruvate. The concentration of this enzyme in the blood tells us about tissue damage.

Answer:

a. True

Explanation:

The co enzyme used for this reaction is NADH+, here H+ acts as co substrate.

This is required to find the tissue damage that has occurred in our body which resulted in leakage of cellular enzymes into the bloodstream.

This coenzyme is used for conversion of lactose dehydrogenase.

Answer:

A. London dispersion

Explanation:

London dispersion force is a temporary attractive force that results when the electrons in two adjacent atoms occupy positions that make the atoms form temporary dipoles. 

The intermolecular forces are due to the attraction between temporary dipoles, and their induced temporary dipoles are the type of  London dispersion force. Therefore, option A is correct.

When the electrons in two nearby atoms occupy positions that cause the atoms to temporarily form dipoles, the consequence is the London dispersion force, a transient attractive force. The term "induced dipole-induced dipole attraction" is frequently used to describe this effect.

The electron density of a molecule is redistributed towards another molecule because the electrons in nearby molecules "flee" when they repel one another. This is typically explained as the instantaneous production of attracted dipoles.

The material's atomic or molecular weight affects the London dispersion forces. More electrons and stronger London forces are present in heavier atoms or molecules. They are therefore more difficult to melt or boil.

Thus, option A is correct.

To learn more about london dispersion force, follow the link;

https://brainly.com/question/20514601

#SPJ2

Answer:

T = 82 K

Explanation:

The computation of the final temperature is shown below;

Given that

T_0 denotes the initial temperature of the gas i.e. 74 K

T denotes the final temperature of the gas = ?

n denotes number of moles of monoatomic gas i.e. 1.00 mol

R denotes universal gas constant = 8.314

c denotes the heat capacity at constant volume i.e.

= (1.5) R = (1.5) (8.314)

= 12.5

Q denotes the Amount of heat absorbed i.e 100 J

We know that

Amount of heat absorbed is provided as

Q = n c (T - T_0)

100 = (1) (12.5) (T - 74)

T = 82 K

Answer:

~4,317.5 moles of Silicon

Explanation:

Using Avogadro's contant we know that:

1mole = 6.022 x 10^23 atoms

So,to calculate the number of moles in 2.60 x 10^27 atoms of Silicon:

=(2.60 x 10^27 x 1)/(6.022 x 10^23)

~4,317.5 moles of Silicon

Hope it helps:)

Answer:

9g

Explanation:

moles O2 = mass / Mr = 12 / 2(16.0) = 0.375

ratio O2 : NO = 5:4

moles NO produced = 0.375 * 4/5 = 0.3

mass NO = Mr * mol = (14.0+16.0) * 0.3 = 9g

The Grams of NO is produced if 12g of O2 is combined with excess ammonia is 80 gram.

The full form of NO is nitrogen oxide Nitrogen belong to the 15th group of the periodic table with molar mass of 14 and oxygen belong to the 16th group of the periodic table.

In the given their are 4 molecules of each nitrogen and oxygen and mass of O2 is given whereas, mass of nitrogen for 4 molecule will be 56 gram.

Grams of NO = 14 × 4 + 12 × 2

Grams of NO = 80 grams.

Therefore, the mass of NO for the given reaction is combined with excess ammonia is 80 gram.

Learn more about NO, here;

https://brainly.com/question/1178944

#SPJ2

Answer:  the area of the telescope lens is \textit{0,08507 ft}

Explanation: Happy I could help!

Answer:

There are 0.195 moles.

Explanation:

1 mol of any gas under STP (meaning 1 atm and 273 K) will occupy 22.4 liters.

With the information above in mind, we can calculate how many moles will occupy 4.38 liters:

In 4.38 liters of a gas at STP there will be 0.195 moles.

Answer: D it’s is 2.0 s

i think..

Explanation:

When the concentration of the HCl is varied, the color of the solution is changed as the equilibrium position moves to the left or right.

The term equilibrium in a chemical reaction connotes that the forward and the revers reactions proceed at the same rate. Let us note that Co(H2O)6^2+ is pink in color while  CoCl4^2– is blue in color.

As such, when the concentration of the HCl is varied, the color of the solution is changed as the equilibrium position moves to the left or right.

Learn more anout equilibrium: https://brainly.com/question/365923

Answer:

when rutherford performed his experiment, only 1 in 20,000 alpha particles bounced straight back or were deflected greatly. the rest went straight through the gold foil. e) based on this evidence, what is in atom's center? positively charged particles.

Explanation:

Answer:

3.11 is the pH of the buffer

Explanation:

The pH of a buffer is obtained using H-H equation:

pH = pKa + log [Conjugate base] / [Weak acid]

Where pH is the pH of the buffer, pKa = -log Ka = 3.14 for the citric buffer and [] could be taken as the moles of each species.

The citric acid,HX (Weak acid), reacts with NaOH to produce sodium citrate, NaX (weak base) and water:

HX + NaOH → H2O + NaX

That means the moles of NaOH added = Moles of sodium citrate produced

And the resulitng moles of HX = Initial moles - Moles NaOH added

Moles HX and NaX:

Moles NaOH = 0.100L * (0.65mol / L) = 0.065 moles NaOH = Moles NaX

Moles HX = 0.300L * (0.45mol / L) = 0.135 moles HX - 0.065 moles NaOH = 0.070 moles HX

Replacing in H-H equation:

pH = 3.14 + log [0.065mol] / [0.070mol]

pH = 3.11 is the pH of the buffer

Answer:

How to Formulate an Effective Research Hypothesis

State the problem that you are trying to solve. Make sure that the hypothesis clearly defines the topic and the focus of the experiment.

Try to write the hypothesis as an if-then statement. ...

Define the variables.

Explanation:

Answer:

The maximum amount of water vapor the air can hold at a given temperature is known as the Saturation Point, it is also identified as 100% relative humidity.

The question is incomplete, the complete question is:

Nitrogen and fluorine react to form nitrogen fluoride according to the chemical equation:

[tex]N_2(g)+3F_2(g)\rightarrow 2NF_3(g)[/tex]

A sample contains 19.3 g of [tex]N_2[/tex] is reacted with 19.3 g of [tex]F_2[/tex]. Now we need to find the amount of [tex]NF_3[/tex] that can be formed by the complete reactions of each of the reactants.

If all of the [tex]N_2[/tex] was used up in the reaction, how many moles of [tex]NF_3[/tex] would be produced?

Answer: 1.378 moles of [tex]NF_3[/tex] are produced in the reaction.

Explanation:

The number of moles is defined as the ratio of the mass of a substance to its molar mass.

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex]       ......(1)

Limiting reagent is defined as the reagent which is completely consumed in the reaction and limits the formation of the product.

Excess reagent is defined as the reagent which is left behind after the completion of the reaction.

In the given chemical reaction, [tex]N_2[/tex] is considered as a limiting reagent because it limits the formation of the product and it was completely consumed in the reaction.

We are given:

Mass of [tex]N_2[/tex] = 19.3 g

Molar mass of [tex]N_2[/tex] = 28.02 g/mol

Putting values in equation 1:

[tex]\text{Moles of }N_2=\frac{19.3g}{28.02g/mol}=0.689mol[/tex]

For the given chemical reaction:

[tex]N_2(g)+3F_2(g)\rightarrow 2NF_3(g)[/tex]

By the stoichiometry of the reaction:

1 mole of [tex]N_2[/tex] produces 2 moles of [tex]NF_3[/tex]

So, 0.689 moles of [tex]N_2[/tex] will produce = [tex]\frac{2}{1}\times 0.689=1.378mol[/tex] of [tex]NF_3[/tex]

Hence, 1.378 moles of [tex]NF_3[/tex] are produced in the reaction.

According to Le cha telier's principle when we increase the pressure of a equilibrium reaction the reaction shift to the side where few moles of gas present.

Your reaction (Notice - I guess the reaction you written is wrong, but still I'm solving with your given prediction)

3NaI (g) + H2 (g) = 2NaHI (g)

Where access of sodium iodide is reacting with Hydrogen gas to form NaHI molecule.

Number of moles of gas on reaction side - 3+2 = 5 moles

Number of moles of gas on product side - 2 moles

Conclusion- the reaction will shift to the right of the reaction

According to Le cha telier's principle when we increase the pressure of a equilibrium reaction the reaction shift to the side where few moles of gas present.

Your reaction (Notice - I guess the reaction you written is wrong, but still I'm solving with your given prediction)

3NaI (g) + H2 (g) = 2NaHI (g)

Where access of sodium iodide is reacting with Hydrogen gas to form NaHI molecule.

Number of moles of gas on reaction side - 3+2 = 5 moles

Number of moles of gas on product side - 2 moles

Conclusion- the reaction will shift to the right of the reaction