Weight percentage of KClO₃ is 117% indicates that there could have been a mistake in the experiment.
How to calculate weight percentage?First, calculate the partial pressure of O₂ in the flask, which is equal to the total pressure minus the vapor pressure of water:
Partial pressure of O₂ = 749 torr - 16.5 torr = 732.5 torr
Next, calculate the number of moles of O₂ produced from the decomposition of KClO₃. We can use the ideal gas law to do this:
PV = nRT
n = PV/RT
where P is the partial pressure of O₂, V is the volume of O₂ collected over water (in liters), R is the gas constant (0.08206 L atm mol⁻¹ K⁻¹), and T is the temperature in Kelvin (273.15 + 19 = 292.15 K).
n = (732.5 torr / 760 torr/atm) × (0.260 L / 1000 L) × (0.08206 L atm mol⁻¹ K⁻¹) × (292.15 K)⁻¹
n = 0.00966 mol O₂
From the balanced chemical equation, 2 moles of KClO₃ produces 3 moles of O₂. Therefore, the number of moles of KClO₃ in the sample is:
n(KClO₃) = (3/2) × n(O₂)
n(KClO₃) = (3/2) × 0.00966 mol
n(KClO₃) = 0.0145 mol
Finally, use the formula for weight percentage:
Weight percentage of KClO₃ = (mass of KClO₃ / mass of sample) × 100%
Calculate the mass of KClO₃ from the number of moles using the formula:
mass = n × formula weight
mass(KClO₃) = 0.0145 mol × 122.55 g/mol
mass(KClO₃) = 1.77 g
The mass of the sample is given as 1.515 g, so the weight percentage of KClO₃ is:
Weight percentage of KClO₃ = (1.77 g / 1.515 g) × 100%
Weight percentage of KClO₃ = 117% (This result is not physically meaningful, indicating that there may have been an error in the experiment.)
Find out more on weight percentage here: https://brainly.com/question/28471488
#SPJ1
The specific heat of octane, C8H18 (1), is 2.22 J/g K. The specific heat of water is 4.184 J/gK.. Does it take more energy to increase 1 mole of water by 10 °C or 1 mole of octane?
Explanation:
The molar mass of octane (C8H18) is approximately 114 g/mol.
To find the energy required to increase 1 mole of substance by 10°C, we can use the formula:
ΔE = n * C * ΔT
where ΔE is the energy required, n is the number of moles, C is the specific heat, and ΔT is the change in temperature.
For water, n = 1 mol, C = 4.184 J/gK, and ΔT = 10°C.
So, the energy required to increase 1 mole of water by 10°C is:
ΔE_water = n * C_water * ΔT
= 1 mol * 4.184 J/gK * 10 K
= 41.84 J
For octane, n = 1 mol, C = 2.22 J/gK, and ΔT = 10°C.
So, the energy required to increase 1 mole of octane by 10°C is:
ΔE_octane = n * C_octane * ΔT
= 1 mol * 2.22 J/gK * 10 K
= 22.2 J
Therefore, it takes more energy to increase 1 mole of water by 10°C than 1 mole of octane.
The enthalpy of vaporization of ethanol is 38.56 kJ/mol at its boiling point (78°C). Calculate the value of AS sur When 1.00 mole of ethanol is vaporized at 78°C and 1.00 atm.
-1.1 10² J/K mol
4.92 × 102 J/K mol
1.1 102 J/K mol
-4.92 102 J/K mol
The enthalpy of vaporization of ethanol is 38.56 kJ/mol at its boiling point (78°C). Calculate the value of entropy of surrounding when 1.00 mole of ethanol is vaporized at 78°C and 1.00 atm is -110.2 kJ/mol K. The correct option is option A.
Entropy is the measurement of the amount of thermal energy for each degree of temperature in a system that cannot be used for productive work. Entropy is a measure of a system's molecular disorder or unpredictability since work is produced by organised molecular motion.
Entropy theory offers profound understanding of the pattern of impulsive shifts for numerous commonplace events. A standout of 19th-century physics is its invention by the German scientist Rudolf Clausius in 1850.
C[tex]_2[/tex]H[tex]_5[/tex]OH(l) → C[tex]_2[/tex]H[tex]_5[/tex]OH(g)
ΔSsystem= 38.56 /351
=110.2 kJ/mol K
ΔSsurrounding=-110.2 kJ/mol K
ΔSuniverse=0
Therefore, the correct option is option A.
To know more about entropy, here:
https://brainly.com/question/13135498
#SPJ1
NH4NO3 is ammonium nitrate is used for supplies ammonium and nitrate ions.
a. Calculate the percentage nitrogen, hydrogen and oxygen by mass in this fertilizer.
b. Calculate the mass of nitrogen in 500kg of ammonium nitrate
Relative atomic masses: H = 1; N = 14 ; O= 16
4. The complete chemical equations for reactions a-e on the Experimental Page are
listed below. Balance each equation by placing the proper coefficient in front c
each chemical formula so that each side of the equation has the same number
atoms of each element.
NaOH +
HCI →>>
NaCl +
HOH
Objective Questions I (Only one correct option) 1. Atom X occupies the fcc lattice sites as well as alternate tetrahedral voids of the same lattice. The packing efficiency (in %) of the resultant solid is closest to (2022 Adv.) (a) 25 (b) 35 (c) 55 (d) 75 a hcp
The packing efficiency (in %) of the resultant solid is (d) 75.
What is packing efficiency of a crystal lattice?Packing efficiency of a crystal lattice refers to the percentage of space in a given volume that is occupied by atoms, ions, or molecules in the lattice.
The closest packing efficiency of a crystal lattice is given by the formula:
packing efficiency = (number of atoms in the unit cell x volume of each atom) / volume of the unit cell
For an fcc lattice, the number of atoms in the unit cell is 4, and for an alternate tetrahedral void, the number of atoms is 2. Therefore, the total number of atoms in the unit cell is 4 + 2 = 6.
The packing efficiency of fcc is 74%, which means the volume occupied by the atoms is 74% of the total volume of the unit cell. When the alternate tetrahedral voids are filled with atoms, the total number of atoms increases, and the volume occupied by the atoms also increases. Hence, the packing efficiency will be greater than 74%.
The closest option to the calculated value is (d) 75. Therefore, the answer is (d) 75.
Learn more about volume here:
https://brainly.com/question/28058531
#SPJ9
Methanol is known to be the simplest alcohol, and is used for an antifreeze agent, a solvent, a fuel and a denaturing for ethyl alcohol. It is also know as wood spirit, as it is obtained from the pyrolysis of food. Today it is prepared as follows: CO(g) + 2H2(g) = CH3OH(1) Using the following data, what would be the enthalpy change for the reaction?
The enthalpy change for the reaction is 443.5 kJ/mol, this indicates that the reaction is exothermic, meaning that heat is released during the reaction.
The enthalpy change of a reaction can be calculated using the following equation:
ΔH = ΣΔH(products) - ΣΔH(reactants)
where ΔH is the enthalpy change, Σ is the sum, and the subscripts refer to the enthalpy of the products and reactants.
Using the data provided, we can look up the standard enthalpy of formation (ΔHf°) for each substance involved in the reaction:
ΔHf°(CO(g)) = -110.5 kJ/mol
ΔHf°(H₂(g)) = -285.8 kJ/mol
ΔHf°(CH₃OH(l)) = -238.6 kJ/mol
To calculate the enthalpy change of the reaction, we can plug in these values into the equation:
ΔH = [ΔHf°(CH₃OH(l))] - [ΔHf°(CO(g)) + 2ΔHf°(H₂(g))]
ΔH = [-238.6 kJ/mol] - [-110.5 kJ/mol + 2(-285.8 kJ/mol)]
ΔH = [-238.6 kJ/mol] - [-682.1 kJ/mol]
ΔH = 443.5 kJ/mol
To learn more about enthalpy follow the link:
https://brainly.com/question/16720480
#SPJ1
Calculate the mass of butane needed to produce 50.0 g of carbon dioxide.
C4H10 + O2 --> CO2 + H2O
The mass must be balanced:
2C4H10 + 13O2 --> 8CO2 + 10H2O
The molar mass of butane is 12 × 4 + 10 = 58
The molar mass of carbon dioxide is 16 × 2 + 12 = 44
First, we calculate the moles of carbon dioxide produced
[tex]n_{CO2} = \frac{50,0 g}{44 g/mol} = 1,14 mol[/tex]
If 2 moles of butane are needed for produce 8 moles of CO2 then x moles of butane are needed to produce 1,14 moles of CO2, therefore
[tex]\frac{2}{8} = \frac{x}{1,14} \\ \\ x = \frac{1,14}{4} = 0,285 mol[/tex]
Then the moles can be multiplied by the molar mass of butane in order to get the total mass of butane burned.
[tex]m_{C4H10} = 0,285 mol × 58 g/mol = 1,65 g[/tex]
DNA is the building block of life, but were you surprised to find out that only 4 base pairs make up every living thing we know of on this planet? How is DNA held together in the double helix? Imagine you were a scientist that discovered one of these important findings out about DNA. Write me a short story that shows your excitement about discovering what life is made up of.
What does a high specific heat tell about a substance?
OA. The substance is probably a metal.
B. It is hard to change the temperature of the substance.
C. The substance has very strong molecular bonds.
D. The substance has high melting and boiling points.
SUBMIT
Answer:
B. It is hard to change the temperature of the substance
2C +2H yield C2H4 Delta H=+52.4 kj/mol
What is the kj of energy absorbed for every mole of carbon reacted
The kJ of the energy absorbed for the every mole of the carbon reacted is 104.8 kJ.
The chemical equation is as :
2C + 2H ---> C₂H₄ , ΔH = + 52.4 kJ/mol
The ΔH is the enthalpy change that is determined by the subtracting the energy of the reactants to the products.
The ΔH = energy of the products - energy of the reactants
The expression for the energy is as :
q = n ΔH
Where,
n = number of the moles
ΔH = enthalpy change
The kJ of the energy absorbed for the every mole of the carbon reacted :
q = 2 mol × 52.4 kJ/mol
q = 104.8 kJ
To learn more about energy here
https://brainly.com/question/12716509
#SPJ4
While isobaric heat can be measured by using the coffee cup calorimeter, what kind of device would be needed to measure the reaction heat under isochoric condition? Please search literature to answer the question.
To measure the reaction heat more accurately at isobaric condition, what modification(s) would you suggest making on the coffee cup calorimeter? Please justify the suggested change(s).
To measure reaction heat under isochoric conditions, a bomb calorimeter is needed.
This device is designed to maintain a constant volume (isochoric) during the reaction, allowing for accurate measurement of reaction heat. To improve the accuracy of the coffee cup calorimeter for measuring reaction heat under isobaric conditions, a modification that could be made is to use a stirring device to ensure uniform mixing of the reactants and to minimize heat loss to the surroundings.
Additionally, a lid with a small hole could be placed over the top of the calorimeter to prevent heat loss while still allowing for pressure equalization. These modifications would help to minimize errors in heat measurement and improve the accuracy of the results obtained.
To know more about the Calorimeter, here
https://brainly.com/question/24150308
#SPJ1
What quantity of heat (in kJ) is absorbed in the process of making 0.887 mol of CF₄ from the following reaction?
C (s) + 2 F₂ (g) → CF₄ (g) ∆H° = 141.3 kJ/mol
125.4 kJ of heat is absorbed in the process of making 0.887 mol of CF₄.
The given reaction produces one mole of CF₄, and its enthalpy change is 141.3 kJ/mol. Therefore, the enthalpy change for the production of 0.887 mol of CF₄ can be calculated as follows:
Enthalpy change for 1 mol of CF₄ = 141.3 kJ/mol
Enthalpy change for 0.887 mol of CF₄ = (0.887 mol) x (141.3 kJ/mol)
Enthalpy change for 0.887 mol of CF₄ = 125.39 kJ
Therefore, the quantity of heat absorbed in the process of making 0.887 mol of CF₄ is 125.39 kJ.
Learn more about heat absorbed, here:
https://brainly.com/question/26550984
#SPJ1
2. a. Draw and label an energy diagram similar to the one shown in the sample problem for a reaction in which E= 125 kJ/mol and E' = 86 kJ/mol. Place the reactants at energy level zero. b. Calculate the values of AE, forward and AEreverse. c. Is this reaction endothermic or exothermic? Explain your answer.
3. a. Draw and label an energy diagram for a reaction in which E= 154 kJ/mol and AE136 kJ/mol. b. Calculate the activation energy, E, for the reverse reaction.
The reaction is endothermic since the energy level of the products have are higher than that of the reactants.
What are the values of AE and E?The activation energy (AE) is the energy difference between the reactants and the transition state.
The change in energy E and the energy difference between the reactants and the products
The data given is as follows:
Reactants: 0 kJ/mol
AE forward 125 kJ/mol
AE reverse: 86 kJ/mol
Products: 39 kJ/mol
The values of ΔE forward and ΔE reverse are as follows:
ΔE forward = (39 - 0) kJ/mol
ΔE forward = +39 kJ/mol
ΔE reverse = (0 - 39) kJ/mol
ΔE reverse = -39 kJ/mol
3. Given that Ea = 154 kJ/mol and ΔE = 136 kJ/mol
AE reverse = ΔE - AE forward
E = 136 kJ/mol - 154 kJ/mol
E = -18 kJ/mol
Learn more about activation energy at: https://brainly.com/question/1380484
#SPJ1
Which of the following most likely happens when the number of particles of a gas decreases?
What is the calibration of this graduated cylinder? calibration
A. 5 mL
B. 2 mL
C. 1 mL
D. 10 mL
The answer is 1ml. The answer is 1ml because of calibration of this graduated cylinder
Answer:
1 mL
Explanation:
According to your definition, it is the difference between marked spaces divided by the # of spaces between marked values.
Difference between 2 marked values: 5 mL
# Of Spaces between marked values: 5
Calibration: 5 mL / 5 mL = 1 mL
In outdoor field conditions, a tensiometer is reasonably accurate up to what soil water tension?
1.1 bar
0 bar
1.2 bar
0.5 bar
Breaking tension describes this circumstance. Tensiometers function up to 0.5 bar. The vacuum gauge of the majority of commercial tensiometers has a suction scale that ranges from 0 to 100 cb.
How does a tensiometer function? What is it used for?A tube filled with water and fitted with a specific porous tip and vacuum gauge is a tensiometer. This device monitors soil water suction, which is akin to the method a plant root employs to get water from the ground. upkeep of the field as seen to the right. Tensiometers are reusable and not very expensive.
A tensiometer's accuracy is how precise?In comparison to ECH2O-5TE and Watermark without site-specific calibration, Tensiometer gave relatively reliable soil moisture measurements, according to statistical analysis of the results. Watermark overestimated the water content of the soil, while ECH2O-5TE did not.
To know more about Tensiometer's visit:
https://brainly.com/question/30151191
#SPJ1
A galvanic cell represented by the reaction:
3Ni2+ +2Al⇒ 3Ni +2Al 3+
has a cell potential, E° cell= 1.43 V, under standard conditions.
Predict the change in cell potential (increase or decrease) under the following conditions. Explain your reasoning.
[Al³+] = 2.0 M and [Ni2+] = .75 M
Answer:
The change in cell potential under non-standard conditions can be predicted using the Nernst equation. The Nernst equation relates the measured cell potential to the reaction quotient and allows the accurate determination of equilibrium constants (including solubility constants).
In this case, the concentrations of Al³+ and Ni²+ are not standard. According to the Nernst equation, an increase in the concentration of the oxidizing agent ion in the cathodic side of the system (reduction reaction) should result in an increase in cell potential. Conversely, an increase in the concentration of the reducing agent in the anodic side of the system (oxidation reaction) should result in a decrease in cell potential.
Explanation:
The Nernst equation enables the determination of cell potential under non-standard conditions. It relates the measured cell potential to the reaction quotient and allows the accurate determination of equilibrium constants (including solubility constants).
The Nernst equation is given by:
Ecell = E°cell - (RT/nF)lnQ
where Ecell is the cell potential under non-standard conditions, E°cell is the standard cell potential, R is the universal gas constant, T is the temperature in kelvins, n is the number of moles of electrons transferred in the balanced equation for the cell reaction, F is Faraday’s constant, and Q is the reaction quotient.
At room temperature (25°C or 298K), this equation can be simplified to:
Ecell = E°cell - (0.0592/n)logQ
where logQ is the base-10 logarithm of the reaction quotient.
To calculate the change in cell potential using this equation, you need to know the standard cell potential (E°cell), the number of moles of electrons transferred in the balanced equation for the cell reaction (n), and the reaction quotient (Q) under non-standard conditions.
AP Environmental Science: According to the diagram, crude oil can be heated and separated into various components. In one barrel of oil, 22 percent is refined into gasoline and 38 percent into diesel fuel.
When the price of a barrel of oil increases, which of the following statements is the most accurate prediction of what will happen?
- The price of gasoline will increase in direct proportion to the increase in a barrel of oil.
- Bitumen for roads and roofing will be affected in supply but not in price.
- Diesel fuels will not be affected in price and can be manufactured from ethanol.
- The price of jet fuel will follow the inverse relationship and increase quickly in cost.
Okay, here are the key points to consider:
- Crude oil is separated into various components like gasoline, diesel fuel, jet fuel, bitumen, etc.
- A barrel of oil contains 22% gasoline and 38% diesel fuel. So these components make up a major portion of the oil.
- When the price of a barrel of oil increases, the costs to produce these components like gasoline and diesel also go up.
- So the prices of gasoline, diesel fuel and other components are directly linked to the price of crude oil. They will likely increase proportionally if oil price rises.
- Bitumen may be affected in supply but its price could still adjust based on supply and demand. It's linked to oil price indirectly.
- Diesel fuel price will also likely rise with oil price increase. It cannot be produced just from ethanol. It requires crude oil.
- Jet fuel price will also follow the increase in oil price. It's not inverse.
So among the options, the choice that is most accurate is:
The price of gasoline will increase in direct proportion to the increase in a barrel of oil.
The other options are not fully supported. Diesel and jet fuel prices will rise, bitumen may see some supply impact but prices will adjust, and prices are directly linked to oil prices, not inversely.
Let me know if you need more explanation.
in which year was the population of arctic fox the greatest? how many where there?
In the year 2000, the population of Arctic foxes reached its peak.
What is population?A region's population is the total number of people living there. Typically, it is expressed as the number of persons in a given volume or region. A census is typically performed to estimate population in order to ascertain its size, density, and distribution. The term "population" can also refer to the variety of species present in a region. Population growth is the gradual rise in a species' number of individuals in a particular area.
At that time, the total number of Arctic foxes in their habitat, which stretches from northern Europe and Asia over the tundra of the Arctic Circle, was believed to be 745,000. Based on the International Union for Conservation of Nature's most recent estimations, this population figure.
The Arctic fox is a very tough species that can endure some of the world's harshest environments. They can also adjust to their surroundings and eat a range of foods, such as grass, eggs, carrion, small mammals, and carrion.
Unfortunately, a variety of causes are causing the Arctic fox population to decline at the moment. Additionally, human actions like hunting, habitat loss, and fur trapping are lowering their numbers.
The Arctic fox is not now facing extinction, according to the IUCN, which has classified it as a species of Least Concern. However, the species is threatened by a number of factors, and unless conservation efforts are made, its population is likely to keep declining.
Reducing human influences on the Arctic fox's environment is crucial for its protection. This entails restricting hunting and trapping in addition to minimising habitat loss and pollution. The ability of the species to adapt to climate change should also be improved, and their population numbers and trends should be tracked. If these steps are adopted, the number of Arctic foxes may eventually return to its original high.
To know more about Arctic fox, visit:
https://brainly.com/question/15396055
#SPJ1
The complete question is,
Which year saw the highest arctic fox population? How many people attended?
Why does the Philippines have relatively high humidity?
Explanation:
Humidity levels are high, averaging around 82% due to the warm moist trade winds that flow through the archipelago, as well as sea surface temperatures, a rich and vibrant vegetative cover and abundant rainfall.
Help with cathodes and electrolysis
The electrode indicated is the cathode
The contents of the beaker are the electrolyte
Electrons flow from the cathode to the anode
Dilute sulfuric acid will give colorless gases at both electrodes
The electrodes used could be made from platinum since they are inert.
What is electrolysis?Electrolysis is a process of using an electric current to drive a non-spontaneous chemical reaction.
This involves the use of an electrolytic cell, where an external power source is used to drive a chemical reaction that would otherwise not occur.
During electrolysis, positive and negative ions move toward the electrodes (positively charged anode and negatively charged cathode) where they undergo oxidation and reduction reactions respectively.
The process is commonly used in the production of metals, such as aluminum, and in the purification of copper and other metals. It is also used in various industrial and laboratory applications, including electroplating, electrorefining, and the production of hydrogen and oxygen gas.
Learn more about electrolysis at: https://brainly.com/question/12994141
#SPJ1
An atom with 14 protons, 14 neutrons, and 16 electrons is stable, -2 charge
stable, +2 charge
unstable, -2 charge
unstable, no charge *
We can see that an atom with 14 protons, 14 neutrons, and 16 electrons is unstable, and has a -2 charge.
So the correct option is the third one.
What can we say about the atom?An atom with 14 protons, 14 neutrons, and 16 electrons is not stable. The number of protons in an atom, also known as its atomic number, determines its element and its chemical properties. In this case, the atom has 14 protons, which corresponds to the element silicon (Si) on the periodic table.
For an atom to be stable, it should have a balanced number of protons and electrons. Electrons are negatively charged particles that orbit the nucleus of an atom in energy levels or electron shells. The number of electrons in a stable atom should be equal to the number of protons, resulting in a neutral charge overall.
In this case, the atom has 14 protons and 16 electrons, which means it has two more electrons than protons, resulting in a net charge of -2. This is an example of an ion.
Learn more about atoms.
https://brainly.com/question/17425565
#SPJ1
would lead to an increase in the internal energy of a system?
An increase in the internal energy of a system can be caused by several factors, such as heating, compression, and work done on the system.
In general, any process that adds energy to a system will result in an increase in its internal energy. For example, if heat is added to a gas in a closed container, the gas molecules will start moving faster and colliding more frequently, resulting in an increase in the internal energy of the gas.
Similarly, if work is done on a system, such as by compressing a gas, the internal energy of the gas will increase due to the increased kinetic energy of its molecules.
Learn more about internal energy of the system, here:
https://brainly.com/question/28333978
#SPJ1
Please help, find the pressure with the gas
Answer:
Pressure of the gas =766.4 mmHg.
Explanation:
Gas pressure greater than atmospheric pressure = Atmospheric pressure + Height
745.0 mm + 26.4 cm = 766.4 mmHg.
Dipolar molecules have a positive and negative center at two different points.
True
False
Dipolar molecules have a separation of charge with a positive center and a negative center located at two different points, resulting in a net dipole moment. The correct option is true
What is Dipolar molecules ?Dipolar molecules are molecules that have a separation of charge, resulting in a positive center and a negative center located at two different points in the molecule.
This separation of charge creates a net dipole moment, which is a measure of the molecule's polarity. The magnitude and direction of the dipole moment depend on the difference in electronegativity between the atoms in the molecule and the molecule's geometry.
Learn more about Dipolar molecules here : brainly.com/question/25670145
#SPJ1
What is the quantity of Fe2+ ion reacting, in moles?
100 mL of a 0.500 M solution of Fe2+ is added to 100 mL of a 0.100 M solution of MnO4-
The balanced chemical equation for the reaction between Fe2+ and MnO4- in acidic solution is :
5 Fe2+ + MnO4- + 8 H+ -> 5 Fe3+ + Mn2+ + 4 H2O
From the equation, we can see that 1 mole of MnO4- reacts with 5 moles of Fe2+.
The initial moles of Fe2+ in the solution are :
0.500 mol/L x 0.100 L = 0.050 mol
Since the stoichiometric ratio between MnO4- and Fe2+ is 1:5, the moles of MnO4- required to react with all the Fe2+ are :
5 x 0.050 mol = 0.250 mol
Therefore, the quantity of Fe2+ ion reacting, in moles, is 0.050 mol.
A 115.0-g sample of a metal at 165.0 °C is added to 265.0 g of ethylene glycol (specific heat capacity = 2.43 J/g･ °C) in a calorimeter at 25.8 °C. The temperature of the ethylene glycol rises to 41.5 °C. Calculate the specific heat capacity of the metal, assuming that all the heat lost by the metal is gained by the ethylene glycol.
The specific heat capacity of the metal can be calculated to be 2.03 J/g･ °C. This result can be explained by the fact that the heat lost by the metal is equal to the heat gained by the ethylene glycol, since no other source of heat is present.
What is specific heat capacity?Specific heat capacity is the amount of heat energy needed to raise the temperature of a unit mass of a substance by 1 degree Celsius. It is measured in joules per kilogram Kelvin (J/kg K).
The specific heat capacity (c) of the metal can be calculated using the following equation:
Q = mc∆T
Where Q is the heat lost by the metal, m is the mass of the metal, and ∆T is the change in temperature of the metal.
Q = (115.0 g)(c)(165.0 °C - 25.8 °C)
On the other hand, the heat gained by the ethylene glycol can be calculated using the following equation:
Q = (265.0 g)(2.43 J/g･ °C)(41.5 °C - 25.8 °C)
By equating the two equations, we can solve for the specific heat capacity of the metal:
(115.0 g)(c)(165.0 °C - 25.8 °C) = (265.0 g)(2.43 J/g･ °C)(41.5 °C - 25.8 °C)
c = 2.03 J/g･ °C
Therefore, the specific heat capacity of the metal can be calculated to be 2.03 J/g･ °C.
This result can be explained by the fact that the heat lost by the metal is equal to the heat gained by the ethylene glycol, since no other source of heat is present.
For more questions related to ethylene glycol
https://brainly.com/question/11994953
#SPJ1
A student dissolves 11.8 g of sodium hydroxide (NaOH) in 250. g of water in a well-insulated open cup. He then observes the temperature of the water rise
from 20.0 °C to 31.3 °C over the course of 6.7 minutes.
Use this data, and any information you need from the ALEKS Data resource, to answer the questions below about this reaction:
NaOH(s) -. Nat (ag) + OH (ag)
You can make any reasonable assumptions about the physical properties of the solution. Be sure answers you calculate using measured data are rounded to 3
significant digits.
Note for advanced students: It's possible the student did not do the experiment carefully, and the values you calculate may not be the same as the known and
published values for this reaction.
See image attached
The reaction in the experiment is exothermic reaction and 158.72 kilo joules at 34.51 degrees celsius is released.
How to calculate change in enthalpy We must ascertain the enthalpy in the second experiment. Using the data from the first and second experiments, we will determine this. We can infer from the data of the first experiment that either heat was released or carried out in the second experiment. This benzoic acid is agitated, producing heat that is equivalent to the heat produced by water. Heat has been produced as a result of the commotion in c. 6 h. The experiment's acid weighs 6 grams, and this measurement is in joules per gram. A unit of water heat is 6 grams. The specific heat of the water used in the experiment is 4.184 joules per gram per 1000 milliliters temperature difference in the first experiment is 21255.51 minus 21 degrees Celsius. We will first need to determine the calorimeter C's heat capacity, and then we will need to determine the temperature change. The result will be 142.389 kilo joules and 158.72 kilo joules at 34.51 degrees celsius.For more information on change in enthalpy kindly visit to
https://brainly.com/question/15457334
#SPJ1
How do plants in Florida respond to spring? (2 points)
Group of answer choices
New plants start to grow and sprout.
The leaves on trees start to change colors.
Plants go dormant and some lose their leaves.
Plants grow a lot and produce flowers and fruit.
1) New plants start to grow and sprout: As temperatures warm up in the spring, seeds that have been dormant over the winter start to germinate and new plants start to grow.
What is sprout?Sprout is a type of plant that is grown from a seed. It is usually a young plant that has just started to grow, and is usually eaten raw or lightly cooked. Some of the most common sprouts are alfalfa, broccoli, and mung bean. Sprouts are highly nutritious, as they contain a large amount of vitamins, minerals, protein, and antioxidants. They are a great addition to salads, sandwiches, and stir-fries, and can also be used as a topping for soups or curries. Sprouts are easy to grow at home, and can be enjoyed in a variety of dishes.
2) The leaves on trees start to change colors: As temperatures warm up in the spring, deciduous trees start to produce new leaves that are lighter in color than the leaves they had in the fall.
To learn more about sprout
https://brainly.com/question/20696518
#SPJ1
Solid ammonium hydroxide breaks down into gaseous ammonia, NH3, and liquid water.
Write a balanced equation for this reaction.
What is the reaction type
The balanced equation for the breakdown of solid ammonium hydroxide into gaseous ammonia and liquid water is:
[tex]NH_{4} OH[/tex](s) → [tex]NH_{3}[/tex] (g) + [tex]H_{2}O[/tex] (l)
This equation indicates that one molecule of solid ammonium hydroxide ([tex]NH_{4} OH[/tex]) decomposes to form one molecule of gaseous ammonia ([tex]NH_{3}[/tex]) and one molecule of liquid water ([tex]H_{2}O[/tex]).
The type of reaction that is occurring is a decomposition reaction. This is because one compound, ammonium hydroxide, is breaking down into two simpler substances, ammonia and water. Decomposition reactions can be induced by heat, light, or electricity and are a common type of chemical reaction in nature. In this case, the breakdown of ammonium hydroxide is likely to be endothermic since heat is required to break the bonds within the compound.
Learn more about balanced equation, here:
https://brainly.com/question/12192253
#SPJ1